 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
6342MI3JB-T Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Bisco Industries | 16000263-42 | MACHINE SCREWS | 3,200 | |||
| 5702-563-42 | Seastrom Mfg | 700 | ||||
| 1634-256-N | RAF Electronic Hardware | 299 | ||||
| 2634-20362-N-113 | Amatom Electronic Hardware | 274 | ||||
| AA6342-10-0.375-00 | Lyn-Tron Inc | 204 | ||||
| 2634-21627-N-140 | Amatom Electronic Hardware | 145 | ||||
| 1634-256-AL-7 | RAF Electronic Hardware | 122 | ||||
| AA6342-10-0.250-12 | Lyn-Tron Inc | 100 | ||||
| AA6342-10-0.750-00 | Lyn-Tron Inc | 81 | ||||
| AA6342-10-0.125-00 | Lyn-Tron Inc | 77 | ||||
| 2634-21650-N-140 | Amatom Electronic Hardware | 50 | ||||
| 15634225 | HEX HEAD CAP SCREWS | 22 | ||||
| AL6342-06-0.250-00 | Lyn-Tron Inc | 13 | ||||
| 58-36-34-26 | Southco | 9 | ||||
| 1634-256-AL | RAF Electronic Hardware | 7 | ||||
 Ameya Holding Limited | ESR10EZPF6342 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | |
| SDR03EZPD6342 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| KTR10EZPF6342 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| SDR03EZPF6342 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
 ComSIT USA | 2072634236 | Molex | AVAILABLE EU | 2,588 | ||
ComSIT USA | MAL203634221 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount RoHS : Compliant | 4,000 | ||
| 76342308LF | Amphenol FCi | BTB RECEPT. VERT DR TMT Board Connector, 16 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator, Receptacle RoHS : Compliant | 2,526 | |||
| BZW06342B | STMicroelectronics | TRANSIL Trans Voltage Suppressor Diode, 600W, 342V V(RWM), Bidirectional, 1 Element, Silicon, DO-15 RoHS : Compliant | 1,000 | |||
| MB634219CG | FUJITSU Limited | Electronic Component RoHS : Not Compliant | 271 | |||
| 76342320LF | Amphenol FCi | BTB RECEPT VERT DR TMT Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator, Receptacle RoHS : Compliant | 184 | |||
| 76342325LF | Amphenol FCi | BTB RECEPT VERT DR TMT Board Connector, 50 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator, Receptacle RoHS : Compliant | 30 | |||
 NexGen Digital | ERJ-1GNF6342C | Panasonic Electronic Components | 40,125 | |||
| RK73H1ETTP6342F | KOA Speer Electronics Inc | RoHS : Compliant | 9,916 | |||
| RK73H1JTTD6342F | KOA Speer Electronics Inc | RoHS : Compliant | 5,000 | |||
 PEI Genesis | AE65-634-26WJ8SA | Aero-Electric Connector Inc |
| 0 | ||
| S4024S6406-34-2-043 | SOURIAU-SUNBANK |
| 0 | |||
| S4361S7416-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4024R6906-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| 956-342-500924 | Amphenol Corporation |
| 0 | |||
| S4526S1206-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4024R7006-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4024S7216-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4021S2216-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4024S6406-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4021R0706-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4092-1216-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4179FR2416-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4021S2516-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4024S6706-34-2 | SOURIAU-SUNBANK |
| 0 | |||
 Rutronik | CR21-6342-FL | ASJ Holdings Limited | RC0805 63,4K 1% 0,125W TK100 RoHS : Compliant |
| 20,000 | |
 EBV Elektronik | IRLTS6342TRPBF | Infineon Technologies AG | Trans MOSFET NCH 30V 83A 6Pin TSOP TR (Alt: SP001578898) RoHS : Compliant | 0 | ||
| CY7C65634-28LTXC | Infineon Technologies AG | (Alt: SP005670383) RoHS : Compliant | 0 | |||
| BCM56342A0KFSBLG | Broadcom Limited | (Alt: BCM56342A0KFSBLG) RoHS : Compliant | 0 | |||
| CY7C65634-28LTXCT | Infineon Technologies AG | (Alt: SP005670385) RoHS : Compliant | 0 | |||
 FDH Electronics | M22759/11-26-3/4-.250" | Whitmore/Wirenetics | Wire and Cable | 25,006 | ||
| RNC60H6342FS | TTI, Inc | Other Products | 73 | |||
| 518630634-2 | BJG Electronics | BJG Microwave C | 40 | |||
| RNC55J6342FSB14 | Vishay Dale | Other Products RoHS : Not Compliant |
| 20 | ||
| 10-417634-259 | Amphenol Aerospace | Connector 38999 | 20 | |||
| 10-786342-25H | Amphenol Aerospace | Connector 38999 |
| 13 | ||
| 5634-202-00958 | TE Connectivity | Connector Misc | 6 | |||
| 23A02863-42 | SOURIAU-SUNBANK | Backshells & Ac |
| 1 | ||
| 12273163-420 | HellermannTyton | Heat Shrink Prd | 0 | |||
| 23A02863-42 | Cooper Interconnect | Backshells & Ac | 0 | |||
| M10-417634-219 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| M10-417634-239 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| M10-417634-259 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| 10-417634-219 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| 10-417634-21H | Amphenol Aerospace | Connector 38999 |
| 0 | ||
 Flip Electronics | CY7C65634-28LTXCKL | Infineon Technologies AG | Stock, Ship Today |
| 1,390 | |
 Neutron USA | E6342G1 | Anderson Power Products | Heavy Duty Power Connectors SBE320 RED 36557 AWG W/AUX |
| 50 | |
| 2663420000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories AAC 50-185 2X10 RoHS : Compliant |
| 14 | ||
| 1863424 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 3.5mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 634/2 HHPU | ebm-papst | DC Fans Tubeaxial Fan, 60x60x25.4mm, 24VDC, 58m3/h, 3.2W, 215Pa, Ball, Tachometer, IP68 |
| 0 | ||
| 3RG6342-3JK00-PF | PEPPERL + FUCHS AUTOMATION | Sensor, Ultrasonic, Proximity Switch Bero, 559547 |
| 0 | ||
| 3RG6342-3AB00-PF | PEPPERL + FUCHS AUTOMATION | Ultrasonic Prox Sensor, Diffuse, Uf: 400kHz, Rectang, R: 60-300mm, DC PNP NO, M12 Conn |
| 0 | ||
| AXG96342 | Axiom Manufacturing | 40GBASE-SR4 QSFP+ TRANSCEIVER FOR INTEL NETWORKS |
| 0 | ||
| 2063-42-ALF | Bourns Inc | Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 420V 11.8x17.0mm DIA RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C6342-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 48 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 48 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6342-48, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly PE3C6342-48 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-48 can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 48 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | |
| PE3C6342/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low loss 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6342/WP-60 can also be known as a low loss 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C6342/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C6342/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6342/WP-60 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low loss RF cable assembly as per your requirements. |
| 42 | ||
| PE3C6342/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low Loss Cable 24 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low loss cable 24 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low loss 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6342/WP-24 can also be known as a low loss 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C6342/WP-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C6342/WP-24 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6342/WP-24 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low loss RF cable assembly as per your requirements. |
| 42 | ||
| PE3C6342-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 12 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable is a male to male coax assembly, PE3C6342-12, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly PE3C6342-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-12 can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C6342-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 60 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 60 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6342-60, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly PE3C6342-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-60 can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C6342/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low loss 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6342/WP-50CM can also be known as a low loss 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C6342/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C6342/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6342/WP-50CM can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low loss RF cable assembly as per your requirements. |
| 42 | ||
| PE3C6342-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 200 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6342-200CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly PE3C6342-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-200CM can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C6342-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 150 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6342-150CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly PE3C6342-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-150CM can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C6342-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Outdoor Rated 7/16 DIN Male to N Male Low PIM Cable 36 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6342-36, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly PE3C6342-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6342-36 can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N male low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3634-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 24 Inch Length Using RG401 Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3634-24, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3634-24 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 24 inch length using RG401 coax. |
| 26 | ||
| PE3W01634-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Female Bulkhead to SMA Male Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly BNC female bulkhead to SMA male cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female bulkhead to SMA male cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assemblies have a female gender on end 1 and male on end 2. This BNC to SMA cable is a female to male coax assembly, PE3W01634-24, can also be known as a BNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC jack to SMA plug cable assembly PE3W01634-24 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01634-24 can also be used in the other direction and will be SMA male to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to SMA male cable 24 inch length using RG58 coax. |
| 0 | ||
| PE3C1634-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. C Male Right Angle to Straight Cut Lead Cable 24 Inch Length Using RG393 Coax., Radio frequency assembly C male right angle to straight cut lead cable 24 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C male right angle to straight cut lead cable 24 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type C cable connection on one end and a straight cut lead cable connection on the other. Our right angle type C to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C1634-24 can also be known as a right angle type C plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1634-24 RF cable has a FEP jacket of 0.390-inch diameter. The flexible RF cable has a between series connection. Type C plug to straight cut lead sexless cable assembly PE3C1634-24 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with right angle type C to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1634-24 can also be used in the other direction and will be a straight cut lead sexless to right angle type C male cable assembly if the opposite connectivity is required. Type C right angle plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to straight cut lead cable assembly for quick shipment worldwide. Variations of type C and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3C6634-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to 2.4mm Male Cable 200 CM Length Using PE-P103 Coax., Radio frequency assembly SMA male to 2.4mm male cable 200 cm length using PE-P103 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to 2.4mm male cable 200 cm length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 2.4mm cable connection on the other. Our SMA to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This SMA to 2.4mm cable is a male to male coax assembly, PE3C6634-200CM, can also be known as a SMA plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 2.4mm plug cable assembly PE3C6634-200CM is built with PE-P103 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 26.5 GHz maximum frequency SMA male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6634-200CM can also be used in the other direction and will be 2.4mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 2.4mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 2.4mm male cable 200 cm length using PE-P103 coax. |
| 0 | ||
| PE3W06342 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male to TNC Female Cable Using LMR-240-DB Coax. PE3W06342 is a N male to TNC female cable using LMR-240-DB coax. This Pasternack N male to TNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06342 N male to TNC female cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36634-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C300, RF Cable Type: PE-C300, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Cable 24 Inch Length Using PE-C300 Coax., Radio frequency assembly N male to N male cable 24 inch length using PE-C300 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male cable 24 inch length using PE-C300 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE36634-24, can also be known as a low loss N type plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE36634-24 is built with PE-C300 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 24 inch length using PE-C300 coax. |
| 0 | ||
 TE Connectivity | 796634-2 | TE Connectivity | 2 POS 5.08MM R/A PLUG,TRM BLK Number of Positions: 2 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 2 Plug Wire-to-Board .2" | Part Number: 796634-2 | Internal Number: 796634-2 | .2" | TE Connectivity RoHS : Compliant |
| 16,022 | |
| 2291634-2 | TE Connectivity | SFP+ 1X1 CAGE ASSY, PF,WITH HEATSINK Pluggable Form Factor: SFP+ Pluggable I/O Product Type: Cage Assembly Sealable: No Circuit Application: Signal Operating Temperature Range: -55 – 105 °C SFP+ Cage Assembly | High Speed I/o | Part Number: 2291634-2 | Internal Number: 2291634-2 | TE Connectivity RoHS : Compliant |
| 298 | ||
| 1-796634-2 | TE Connectivity | 12 POS 5.08MM R/A PLUG,TRM BLK Number of Positions: 12 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 12 Plug Wire-to-Board .2" | Part Number: 1-796634-2 | Internal Number: 1-796634-2 | .2" | TE Connectivity RoHS : Compliant |
| 255 | ||
| 4-794634-2 | TE Connectivity | 12P MICRO MNL ASSY,VRT,SMT LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 12 | PCB Header & Receptacle | Part Number: 4-794634-2 | Internal Number: 4-794634-2 | TE Connectivity RoHS : Compliant |
| 93 | ||
 Venkel Ltd. | PWCR1206-WK-6342FT | VENKEL LTD | Pulse Withstanding CR;1206;3/4W;�100PPM;63.4K;�1% RoHS : Compliant | 0 | ||
| AGCR0805-YK-6342FT | VENKEL LTD | Auto Grade Resistor;0805;1/3W;�100PPM;63.4K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UE-6342CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;63.4K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UN-6342BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;63.4K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-6342FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;63.4K;�1% RoHS : Compliant | 0 | |||
| HPTF1206-TN-6342AT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;63.4K;�0.05% RoHS : Compliant | 0 | |||
| PWCR0805-RK-6342DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;63.4K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-6342BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;63.4K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-6342BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;63.4K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0207-XC-6342FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�50PPM;63.4K;�1% RoHS : Not Compliant | 0 | |||
| MELFC0204-TZ-6342FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;63.4K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-6342CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;63.4K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-ZZ-6342DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�15PPM;63.4K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XP-6342CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;63.4K;�0.25% RoHS : Compliant | 0 | |||
| MELFM0207-VC-6342FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;63.4K;�1% RoHS : Not Compliant | 0 | |||
 Vyrian | 6342SL002 | Alpha Wire | Wire And Cable, 6 Conductor(s), 22AWG, 300V, Communication And Control Cable RoHS : Compliant | 14,783 | ||
| 6342SL001 | Alpha Wire | Wire And Cable, 6 Conductor(s), 22AWG, 300V, Communication And Control Cable RoHS : Compliant | 14,317 | |||
| 261-336/342-000 | WAGO Innovative Connections | Modular Terminal Block, 24A, 2.5mm2, 2 Row(s), 1 Deck(s) RoHS : Compliant | 13,971 | |||
| MAX6342SUT+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.93V, CMOS, PDSO6 RoHS : Compliant | 11,933 | |||
| 1776342 | Phoenix Contact | Barrier Strip Terminal Block, 41A, 6mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,204 | |||
| AMGP-6342-TR2G | Broadcom Limited | RoHS : Compliant | 8,432 | |||
| MAX6342LUT+ | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, PDSO6 RoHS : Compliant | 6,955 | |||
| BCM56342SD00 | Broadcom Limited | 6,354 | ||||
| MAX6342LUT+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.63V, CMOS, PDSO6 RoHS : Compliant | 6,023 | |||
| AMGP-6342-BLKG | Broadcom Limited | RoHS : Compliant | 5,987 | |||
| AMGP-6342 | Broadcom Limited | 5,645 | ||||
| AD9634-210EBZ | Analog Devices Inc | 5,418 | ||||
| 1863424 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,536 | |||
| BZW06-342RL | STMicroelectronics | Trans Voltage Suppressor Diode, 600W, 342V V(RWM), Unidirectional, 1 Element, Silicon, DO-15 RoHS : Compliant | 3,931 | |||
MAX6342LUT-T | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, +4.63VV, CMOS, PDSO6 RoHS : Not Compliant | 716 | |||
 Win Source Electronics | IRLHS6342T | Infineon Technologies AG | N-Channel 30V 3.4A 1.25W Surface Mount Micro6 |
| 268,888 | |
| IRLHS6342TRPBF | Infineon Technologies AG | MOSFET N-CH 30V 8.7A PQFN RoHS : Compliant |
| 268,888 | ||
| IRLTS6342 | Infineon Technologies AG | P-Channel 20V 9.5A 1.5W TSOP-6 MOSFET |
| 120,000 | ||
| IRLTS6342TRPBF | Infineon Technologies AG | MOSFET N-CH 30V 8.3A 6TSOP RoHS : Compliant |
| 45,000 | ||
| IRLHS6342 | Infineon Technologies AG | N-Channel 30V 3.4A 1.25W Surface Mount Micro6 |
| 25,000 | ||
| IRL6342 | Infineon Technologies AG | N-Channel 30V 15A 2.5W Surface Mount SO-8 |
| 15,887 | ||
| IRL6342PBF | Infineon Technologies AG | MOSFET N-CH 30V 9.9A 8SO RoHS : Compliant |
| 14,730 | ||
| IRL6342TRPBF | Infineon Technologies AG | MOSFET N-CH 30V 9.9A 8SOIC RoHS : Compliant |
| 14,300 | ||
CY7C65634-28LTXC | Cypress Semiconductor | HX2VL™ Very Low Power USB 2.0 Hub Controller RoHS : Compliant |
| 10,000 | ||
| CY7C65634-28LTXCT | Cypress Semiconductor | HX2VL™ Very Low Power USB 2.0 Hub Controller RoHS : Compliant |
| 9,540 | ||
| 76342-320LF | Amphenol Corporation | CONN RCPT 40POS 0.1 GOLD PCB |
| 560 | ||
| BCM56342A0KFSBLG | Broadcom Limited | 28GE + 4X10GE + 2XHG21 / Telecom IC |
| 559 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand