| Electronic Components Datasheet Search |
|
6444-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 4-644456-0 | TE Connectivity | Connector: wire-board; male; data; PIN: 10; soldering,THT; Inom: 5A RoHS : Compliant |
| 4,000 | |
| 644487-6 | TE Connectivity | Connector: wire-board; male; data; Inom: 5A; 250V; PIN: 6; shrouded RoHS : Compliant |
| 1,698 | ||
| 3-644465-9 | TE Connectivity | Connector: wire-board; female; data; Inom: 7A; PIN: 9; 3.96mm; tinned RoHS : Compliant |
| 750 | ||
| 1-644487-4 | TE Connectivity | Connector: wire-board; male; data; Inom: 5A; 250V; PIN: 14; shrouded RoHS : Compliant |
| 732 | ||
| 3-644466-6 | TE Connectivity | Connector: wire-board; female; data; Inom: 7A; PIN: 6; 3.96mm; tinned RoHS : Compliant |
| 485 | ||
| 1064440000 | Weidmüller Interface GmbH & Co. KG | Surge arrester; Poles: 1; for DIN rail mounting; -40÷70°C; IP20 RoHS : Compliant |
| 80 | ||
| 3-644486-0 | TE Connectivity | Connector: wire-board; plug; male; data; Inom: 5A; 250V; PIN: 10 RoHS : Compliant |
| 60 | ||
| 6444 | Festo | Throttle-check valve; 0.5÷10bar; NBR caoutchouc; compressed air |
| 0 | ||
| 10046444 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 1; THT; 3A; 250V |
| 0 | ||
| 2644440000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CPS; 15A; 630V |
| 0 | ||
| 1006-444 | Megger Group Limited | Test acces: test leads; black; 2pcs; 1.5m |
| 0 | ||
| 09300164441 | HARTING Technology Group | Enclosure for connectors: HDC; IP65; for cable; aluminium RoHS : Compliant |
| 0 | ||
| 2644460000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CPS; 15A; 630V |
| 0 | ||
| 3-1879644-4 | TE Connectivity | Resistor: thin film; 41.2kΩ; THT; 250mW; ±1%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 0 | ||
| 1-2176444-0 | TE Connectivity | Resistor: wire-wound; 470Ω; with heatsink; screw; 160W; ±5%; 1.1kV RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MAX6444US16K+T | Analog Devices Inc | Microprocessor Reset Circuits with Long Manual Reset Setup Period RoHS : Compliant | 105,000 | ||
| MAX6444US26L+T | Analog Devices Inc | MAX6444US26L+T 电压监控器, 2.55V, 手动复位功能, 用于单/双电压监测器,单/双电压序列发生器, 4针 SOT-143封装 RoHS : Compliant | 22,499 | |||
| MAX6444US23L+T | Analog Devices Inc | IC MPU RESET 2.313V SOT143-4 RoHS : Compliant | 17,500 | |||
| MAX6444US29L+T | Analog Devices Inc | IC MPU RESET 2.925V SOT143-4 RoHS : Compliant | 2,499 | |||
![]() ComSIT USA | M064446C001 | C & C MACHINE | AVAILABLE EU | 2 | ||
![]() ComSIT USA | 26444869 | TE Connectivity | Board Connector, 9 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Not Compliant | 875 | ||
| 913936444 | TE Connectivity | PIN ASSEMBLY EUROCARD TYPES B, C AND SHORT VERSION Board Euro Connector, 96 Contact(s), 3 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Guide Slot, Gray Insulator, Plug RoHS : Compliant | 100 | |||
![]() Powell Electronics | 3-644457-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 11,344 | |
| 3-644457-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 9,332 | ||
| 4-644456-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 4,653 | ||
| 3-644461-6 | TE Connectivity | TE COMPONENT (REF 3-644461-6) RoHS : Compliant |
| 1,848 | ||
| 3-644466-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,320 | ||
| 3-644468-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 983 | ||
| 3-644488-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 901 | ||
| 4-644465-1 | TE Connectivity | TE COMPONENT (REF 4-644465-1) RoHS : Compliant |
| 817 | ||
| 10147213-644406LF | Amphenol FCi | Cable Assembly |
| 132 | ||
| 2-644486-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 54 | ||
| 1106444-2 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 49 | ||
| 2-644487-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 26 | ||
| 2176444-8 | TE Connectivity | Passive Components RoHS : Compliant |
| 12 | ||
| 1976444-1 | TE Connectivity | PRO-CRIMPER TOOL & DIE |
| 5 | ||
| 1-2119644-4 | TE Connectivity | RAM WASHER, PRECISION |
| 1 | ||
![]() Chip 1 Exchange | 1-964449-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,152 | ||
| 2-964449-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,891 | |||
| 4-644457-1 | TE Connectivity | INSTOCK RoHS : Compliant | 745 | |||
| 3-644456-5 | TE Connectivity | INSTOCK RoHS : Compliant | 235 | |||
![]() Avnet Asia | 2-644487-6 | TE Connectivity | (Alt: 2-644487-6) RoHS : Compliant | 0 | ||
| 2-644487-3 | TE Connectivity | (Alt: 2-644487-3) RoHS : Compliant | 0 | |||
| 3-644461-6 | TE Connectivity | (Alt: 3-644461-6) RoHS : Compliant | 0 | |||
| 2-644487-4 | TE Connectivity | (Alt: 2-644487-4) RoHS : Compliant |
| 0 | ||
| 0164440001 | Molex | (Alt: 0164440001) RoHS : Compliant | 0 | |||
| 2-644489-5 | TE Connectivity | (Alt: 2-644489-5) RoHS : Compliant | 0 | |||
| 2-644486-8 | TE Connectivity | (Alt: 2-644486-8) RoHS : Compliant |
| 0 | ||
| 3-644456-3 | TE Connectivity | (Alt: 3-644456-3) RoHS : Compliant | 0 | |||
| 2-644488-3 | TE Connectivity | (Alt: 2-644488-3) RoHS : Compliant | 0 | |||
| 10028916-4444P00LF | Amphenol Corporation | (Alt: 10028916-4444P00LF) RoHS : Compliant | 0 | |||
| 2-644486-4 | TE Connectivity | (Alt: 2-644486-4) RoHS : Compliant | 0 | |||
| 2-644486-2 | TE Connectivity | (Alt: 2-644486-2) RoHS : Compliant | 0 | |||
| 2-644486-6 | TE Connectivity | (Alt: 2-644486-6) RoHS : Compliant | 0 | |||
| 3-644456-2 | TE Connectivity | (Alt: 3-644456-2) RoHS : Compliant | 0 | |||
| 3-644456-6 | TE Connectivity | (Alt: 3-644456-6) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MCP6444-E/SL![]() | Microchip Technology Inc | OP Amp Quad GP RR IO 6V 14Pin SOIC N (Alt: MCP6444-E/SL) RoHS : Compliant | 0 | ||
MCP6444-E/ST![]() | Microchip Technology Inc | OP Amp Quad GP RR IO 6V 14Pin TSSOP (Alt: MCP6444-E/ST) RoHS : Compliant | 0 | |||
MCP6444T-E/SL![]() | Microchip Technology Inc | OP Amp Quad GP RR IO 6V 14Pin SOIC N TR (Alt: MCP6444T-E/SL) RoHS : Compliant | 0 | |||
MCP6444T-E/ST![]() | Microchip Technology Inc | (Alt: MCP6444T-E/ST) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AX7DAF1-644.4563T![]() | Abracon Corporation | XTAL OSC XO 644.4563MHZ LVDS SMD RoHS : Compliant |
| 0 | |
![]() Component Electronics, Inc | 644486-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 33,780 | |
| 2-644486-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,507 | ||
| 1-644486-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant | 200 | |||
| 2-644486-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 163 | ||
| 644461-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 105 | ||
| 644456-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
| 3-644457-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
| 3-644468-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 28-P16444A-02401 | MACOM | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | 2064-440-A-22 | RAF Electronic Hardware | 0 | |||
| 4564-440-SS | RAF Electronic Hardware | 0 | ||||
| 1644-440-A-7 | RAF Electronic Hardware | ALUM-RD FEMALE STNDOFF | 0 | |||
| 2064-440-SS | RAF Electronic Hardware | 0 | ||||
| 8064-440-A-24 | RAF Electronic Hardware | 0 | ||||
| 2064-440-A-7 | RAF Electronic Hardware | 0 | ||||
| 2064-440-AL | RAF Electronic Hardware | 0 | ||||
| 1644-440-A-6 | RAF Electronic Hardware | 0 | ||||
| S6444 | Heyco | SUNRUNNER 2 CLIP BULK | 0 | |||
| 46444 | SHEREX FASTENING SO | 0 | ||||
| 46444 | PennEngineering (PEM) | 0 | ||||
| 8064-440-A-22 | RAF Electronic Hardware | 0 | ||||
| 1644-440-SS | RAF Electronic Hardware | 0 | ||||
| 2064-440-AL-6 | RAF Electronic Hardware | 0 | ||||
| 2064-440-AL-7 | RAF Electronic Hardware | Standard Aluminum Female-Femal Clear Iridite finish | 0 | |||
![]() EBV Elektronik | MCP6444-E/SL![]() | Microchip Technology Inc | OP Amp Quad GP RR IO 6V 14Pin SOIC N (Alt: MCP6444-E/SL) RoHS : Compliant | 0 | ||
MCP6444-E/ST![]() | Microchip Technology Inc | OP Amp Quad GP RR IO 6V 14Pin TSSOP (Alt: MCP6444-E/ST) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 2164-440 | BJG Electronics | BJG Microwave C | 308 | ||
| H6444A10B | FDH Electronics | Hook-Up Wire |
| 82 | ||
| 91-644417-ABS | Amphenol Aerospace | Connector Acc |
| 31 | ||
| 4-644456-6 | TE Connectivity | Connector Misc RoHS : Compliant |
| 0 | ||
| 4-644456-2 | TE Connectivity | Connector Misc RoHS : Compliant |
| 0 | ||
![]() Maritex | 3-644456-3 | TE Connectivity | Male Pin Headers; 3-644456-3; TE CONNECTIVITY; 1; Tin; Vertical; 3 RoHS : Compliant |
| 14,661 | |
| 3-644456-2 | TE Connectivity | Male Pin Headers; 3-644456-2; TE CONNECTIVITY; 1; Vertical; Tin; 2 RoHS : Compliant |
| 7,109 | ||
| 10028916-4444P00LF | Amphenol Corporation | Custom Backplane Connectors; 10028916-4444P00LF; AMPHENOL; 2; 4; Straight; 80 A |
| 90 | ||
![]() Neutron USA | 2906444 | Phoenix Contact | PLUG-IN FUSE TE5 2A TRIP FAST BL;FUSE/TE5/2A/F-5PCS RoHS : Compliant |
| 50 | |
| 09300164441 | HARTING Technology Group | Heavy Duty Power Connectors METAL HOOD HAN 16B 1 LVR LCKING RoHS : Compliant |
| 3 | ||
| K64444WW | Kensington Computer Products Group | NANOSAVE KEYED LAPTOP LOCK |
| 0 | ||
VPM36-4440![]() | Triad Magnetics | Power Transformers Toroidal Medical 160VA, 36V@4.44A RoHS : Compliant |
| 0 | ||
| 64442-1-7612 | ebm-papst | Fan Accessories TERM BOX-68 SZ MTR. |
| 0 | ||
| K64440WW | Kensington Computer Products Group | N17 KEYED LOCK FOR DELL LAPTOP FOR DELL W/ NOBLE SLOT |
| 0 | ||
| VPT36-4440 | Triad Magnetics | Power Transformers 36.0V CT @ 4.44A 18V @ 8.88A Parallel RoHS : Compliant |
| 0 | ||
| 64445-1-7612 | ebm-papst | Fan Accessories TERM BOX EURO STD |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06444 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable Using 93 Ohm RG62 Coax. PE3W06444 is a BNC female bulkhead to BNC female bulkhead cable using RG62 coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3W06444 BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG62 coax. | 1,197 | ||
| PE3W06444-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 19.68 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 50 cm Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 50 cm length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 50 cm length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-50CM, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-50CM is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 50 cm length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 39.37 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 100 cm Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 100 cm length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 100 cm length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-100CM, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-100CM is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 100 cm length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 60 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 60 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 60 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 60 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-60, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-60 is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 60 inch length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 78.74 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 200 cm Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 200 cm length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 200 cm length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-200CM, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-200CM is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 200 cm length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 12 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 12 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-12, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-12 is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 36 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 36 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 36 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 36 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-36, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-36 is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 36 inch length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3W06444-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 24 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 24 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 24 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 24 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3W06444-24, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3W06444-24 is built with RG62 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 24 inch length using 93 Ohm RG62 coax. |
| 133 | ||
| PE3C6444 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. Mini SMP Female to Straight Cut Lead Cable Using PE-P047 Coax., Radio frequency assembly mini SMP female to straight cut lead cable using PE-P047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Mini SMP female to straight cut lead cable using PE-P047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and straight cut lead cable connection on the other. Our mini SMP to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This mini SMP to straight cut lead cable is a female to sexless coax assembly, PE3C6444, can also be known as a mini SMP jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to straight cut lead sexless cable assembly PE3C6444 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this mini SMP female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6444 can also be used in the other direction and will be straight cut lead sexless to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to straight cut lead cable using PE-P047 coax. | 0 | |||
| PE3W06444LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable Using 93 Ohm RG62 Coax, LF Solder. PE3W06444LF is a BNC female bulkhead to BNC female bulkhead cable using RG62 coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3W06444LF BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG62 coax. | 0 | |||
| PE3W06444/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. | 0 | |||
| PE71S6444 | Pasternack Enterprises | Key Specifications, Connector Series: 2.92mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.7 dB, Minimum Isolation: 60 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 40 GHz, up to 10W, 2M Lifecycles, 12V, Indicators, TTL, 2.92mm. PE71S6444 electromechanical RF relay switch from Pasternack is a spdt switch design with failsafe actuator. Our spdt electromechanical RF failsafe switch uses 2.92mm connectors at 50 Ohms. This 2.92mm RF relay spdt switch has a maximum frequency of 40 GHz and maximum power of Watts. The Pasternack radio frequency spdt 2.92mm electro-mechanical relay switch is rated at a control voltage of 12 Volts, indicator voltage and switching speed of 20ms. 2.92mm spdt electro mechanical RF relay failsafe switch features Indicators, TTL Logic with an isolation minimum of 60 dB. Spdt electromechanical relay radio frequency failsafe switch PE71S6444 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our spdt 2.92mm coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE36444LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm N Male Cable Using 75 Ohm RG6 Coax with HeatShrink, LF Solder, RoHS. PE36444LF/HS is a F male to N male cable using RG6 coax. This Pasternack F male to N male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm N for connector 2. Our male F to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36444LF/HS F male to N male cable assembly is constructed with RG6 coax. | 0 | |||
| PE3W16444 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Female Bulkhead Cable Using PE-SR402FL Coax. PE3W16444 is a 2.92mm male to SMA female bulkhead cable using PE-SR402FL coax. This Pasternack 2.92mm male to SMA female bulkhead cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. Our male 2.92mm to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W16444 2.92mm male to SMA female bulkhead cable assembly is constructed with PE-SR402FL coax. | 0 | |||
| PE3C2644-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. HN Male to HN Male Right Angle Cable 48 Inch Length Using RG213 Coax., Radio frequency assembly HN male to HN male right angle cable 48 inch length using RG213 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 48 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C2644-48 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3C2644-48 is built with RG213 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C2644-48 RF cable are available on our downloadable PDF datasheet.PE3C2644-48 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 3-644457-4 | TE Connectivity | 04P MTA100 HDR ASSY R/A NARROW PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | PCB Header: Polyester & Right Angle & Unshrouded | Part Number: 3-644457-4 | Internal Number: 3-644457-4 | TE Connectivity RoHS : Compliant |
| 19,886 | |
| 4-644456-0 | TE Connectivity | 10P MTA100 HDR ASSY (NARROW) PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | Polyester Vertical PCB Header: 2.54Mm & Breakaway & Mta 100 | Part Number: 4-644456-0 | Internal Number: 4-644456-0 | TE Connectivity RoHS : Compliant |
| 18,701 | ||
| 3-644454-1 | TE Connectivity | 05P MTA100 HDR W/O#4 NARROW PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | Polyester Vertical PCB Header: 2.54Mm & Breakaway & Mta 100 | Part Number: 3-644454-1 | Internal Number: 3-644454-1 | TE Connectivity RoHS : Compliant |
| 14,357 | ||
| 3-644460-5 | TE Connectivity | 05P MTA156 CONN ASSY 18AWG ORA Number of Positions: 5 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarizing Tab Standard Rectangular Connector | 5 Receptacle Connector Assembly With | Part Number: 3-644460-5 | Internal Number: 3-644460-5 | TE Connectivity RoHS : Compliant |
| 8,586 | ||
| 2-644487-4 | TE Connectivity | 04P MTA100 SHRD HDR ASSY 30AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644487-4 | Internal Number: 2-644487-4 | TE Connectivity RoHS : Compliant |
| 6,810 | ||
| 4-644456-4 | TE Connectivity | 14P MTA100 HDR ASSY (NARROW) PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 14 | Polyester Vertical PCB Header: 2.54Mm & Breakaway & Mta 100 | Part Number: 4-644456-4 | Internal Number: 4-644456-4 | TE Connectivity RoHS : Compliant |
| 4,598 | ||
| 2-644486-2 | TE Connectivity | 02P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 2 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644486-2 | Internal Number: 2-644486-2 | TE Connectivity RoHS : Compliant |
| 2,435 | ||
| 2-644487-3 | TE Connectivity | 03P MTA100 SHRD HDR ASSY 30AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644487-3 | Internal Number: 2-644487-3 | TE Connectivity RoHS : Compliant |
| 2,155 | ||
| 2-644487-6 | TE Connectivity | 06P MTA100 SHRD HDR ASSY 30AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644487-6 | Internal Number: 2-644487-6 | TE Connectivity RoHS : Compliant |
| 2,017 | ||
| 3-644466-4 | TE Connectivity | 04P MTA156 CONN ASSY 20AWG YEL Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarizing Tab Standard Rectangular Connector | 4 Receptacle Connector Assembly With | Part Number: 3-644466-4 | Internal Number: 3-644466-4 | TE Connectivity RoHS : Compliant |
| 1,386 | ||
| 4-644465-1 | TE Connectivity | 11P MTA156 CONN ASSY 18AWG ORA Number of Positions: 11 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 11 Receptacle Connector Assembly With | Part Number: 4-644465-1 | Internal Number: 4-644465-1 | TE Connectivity RoHS : Compliant |
| 1,001 | ||
| 3-644486-2 | TE Connectivity | 12P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 12 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 3-644486-2 | Internal Number: 3-644486-2 | TE Connectivity RoHS : Compliant |
| 895 | ||
| 3-644463-7 | TE Connectivity | 07P MTA156 CONN ASSY 22AWG RED Number of Positions: 7 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarizing Tab Standard Rectangular Connector | 7 Receptacle Connector Assembly With | Part Number: 3-644463-7 | Internal Number: 3-644463-7 | TE Connectivity RoHS : Compliant |
| 476 | ||
| 4-644456-6 | TE Connectivity | 16P MTA100 HDR ASSY (NARROW) PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 16 | Polyester Vertical PCB Header: 2.54Mm & Breakaway & Mta 100 | Part Number: 4-644456-6 | Internal Number: 4-644456-6 | TE Connectivity RoHS : Compliant |
| 319 | ||
| 3-644466-8 | TE Connectivity | 08P MTA156 CONN ASSY 20AWG YEL Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 8 Receptacle Connector Assembly With | Part Number: 3-644466-8 | Internal Number: 3-644466-8 | TE Connectivity RoHS : Compliant |
| 264 | ||
![]() Vyrian | MAX6444US44L+ | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 11,564 | ||
| MAX6444US16S+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 11,488 | |||
| MAX6444US26T/V+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 10,824 | |||
| MAX6444US44T-T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +4.375V, BICMOS, PDSO4 RoHS : Unknown | 9,836 | |||
| ADIS164446BMLZ | Analog Devices Inc | SENSOR MODULE RoHS : Compliant | 9,157 | |||
| MAX6444US22S-T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +2.188V, BICMOS, PDSO4 | 8,366 | |||
| MAX6444US16T-T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +1.575V, BICMOS, PDSO4 | 7,680 | |||
| MAX6444US17T+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 7,004 | |||
| MAX6444US17K/V+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 6,359 | |||
| MAX6444US16L+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +1.58V, BICMOS, PDSO4 RoHS : Compliant | 6,182 | |||
| MAX6444US29L+ | Analog Devices Inc | Power Management Circuit, Fixed, +2.925V, BICMOS RoHS : Compliant | 5,827 | |||
| 1864448 | Phoenix Contact | Barrier Strip Terminal Block, 13.5A, 1mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,622 | |||
| MAX6444US29L/V+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 5,494 | |||
| MAX6444US22K+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 5,433 | |||
| MAX6444US44L+T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +4.375V, BICMOS, PDSO4 RoHS : Compliant | 5,305 | |||
![]() Win Source Electronics | ADS6444IRGCR![]() | Texas Instruments | QUAD CHANNEL, 14-BIT, 125/105/80/65 MSPS ADC WITH SERIAL LVDS OUTPUTS | IC ADC 14BIT PIPELINED 64VQFN RoHS : Compliant |
| 2,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |