| Electronic Components Datasheet Search |
|
66638G19-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 2961666631 | Fair-Rite Products Corp | Ferrite: bead; 1.13kΩ; Leads: axial; 100MHz; -55÷125°C RoHS : Compliant |
| 23,400 | |
| 166633-1 | TE Connectivity | Connector: DIN 41612; socket; data; straight; crimped; gold-plated RoHS : Compliant |
| 14,500 | ||
| 666300-000 | TE Connectivity | Enclosure for connectors: D-Sub RoHS : Not Compliant |
| 25 | ||
| 66630096016 | HARTING Technology Group | Connector: D-Sub; PIN: 9; data transfer; straight; screw terminal RoHS : Compliant |
| 11 | ||
| 66633 | Goobay | Patch cord; S/FTP; Cat 6; RJ45 plug,both sides; 2m; stranded; Cu |
| 4 | ||
| 66634 | Goobay | Patch cord; S/FTP; Cat 6; RJ45 plug,both sides; 3m; stranded; Cu |
| 2 | ||
| 66634 | Delock | PC extension card: sound; Jack 3.5mm 3pin socket x2,USB A plug |
| 0 | ||
| 7-1879666-3 | TE Connectivity | Resistor: thin film; 750kΩ; THT; 250mW; ±0.1%; Ø2.5x7.2mm; axial RoHS : Compliant |
| 0 | ||
| 2466630500 | Weidmüller Interface GmbH & Co. KG | 2466630500 RoHS : Compliant |
| 0 | ||
| 66633 | Delock | PC extension card: sound; Jack 3.5mm 3pin socket x2,USB A plug |
| 0 | ||
| LNK6663K-TL | Power Integrations | IC: PMIC; AC/DC switcher,SMPS controller; Uin: 85÷265V; eSOP-12B RoHS : Compliant |
| 0 | ||
| 7010.9966.63 | Schurter Electronic Components | Fuse: fuse; 7x2mm; ceramic; 3.5A; 125VAC; 125VDC; time-lag; copper RoHS : Compliant |
| 0 | ||
| 00116663 | GSR | Tap: metric; M14; fine thread,left hand thread; 1.25; L: 70mm; 9mm |
| 0 | ||
| 2466630150 | Weidmüller Interface GmbH & Co. KG | 2466630150 RoHS : Compliant |
| 0 | ||
| 2466631000 | Weidmüller Interface GmbH & Co. KG | 2466631000 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 87666-3 | TE Connectivity | - Tape and Reel (Alt: 87666-3) RoHS : Compliant |
| 62,500 | |
| 5-104666-3 | TE Connectivity | Conn Shrouded Header HDR 40 POS 1.27mm Solder ST Thru-Hole Tube - Rail/Tube (Alt: 5-104666-3) RoHS : Compliant |
| 448 | ||
| 1-2176663-0 | TE Connectivity | MELF SMA-Q 1M91 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 1-2176663-0) RoHS : Not Compliant |
| 0 | ||
| 6-2176663-5 | TE Connectivity | MELF SMA-Q 7M15 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 6-2176663-5) RoHS : Not Compliant |
| 0 | ||
| 7-2266633-7 | TE Connectivity | Spare Part Kit for OCEAN-2.0 Applicators - Bag (Alt: 7-2266633-7) RoHS : Not Compliant |
| 0 | ||
| 5962F9666301VXC | Renesas Electronics Corporation | - Trays (Alt: HS9-26C31RH-Q) RoHS : Compliant | 0 | |||
| 4-2176663-7 | TE Connectivity | MELF SMA-Q 4M64 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 4-2176663-7) RoHS : Not Compliant |
| 0 | ||
| 4-2176663-6 | TE Connectivity | MELF SMA-Q 4M53 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 4-2176663-6) RoHS : Not Compliant |
| 0 | ||
| 2176663-5 | TE Connectivity | MELF SMA-Q 1M69 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 2176663-5) RoHS : Not Compliant |
| 0 | ||
| 73366-6350 | Molex | MCX P R/A RG316/U CABLE 50 OHM - Bulk (Alt: 0733666350) RoHS : Compliant |
| 0 | ||
| 5962F9666302VEC | Renesas Electronics Corporation | - Rail/Tube (Alt: HS1-26CLV31RH-Q) RoHS : Compliant | 0 | |||
| 4-2176663-9 | TE Connectivity | MELF SMA-Q 4M87 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 4-2176663-9) RoHS : Not Compliant |
| 0 | ||
| 6-2176663-4 | TE Connectivity | MELF SMA-Q 6M98 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 6-2176663-4) RoHS : Not Compliant |
| 0 | ||
| 2-2176663-9 | TE Connectivity | MELF SMA-Q 3M01 1% 50PPM 0204 0.4W - Tape and Reel (Alt: 2-2176663-9) RoHS : Not Compliant |
| 0 | ||
| 170M6663 | Eaton Corporation | - Bulk (Alt: 170M6663) RoHS : Compliant |
| 0 | ||
![]() Newark | 2961666631 | Fair-Rite Products Corp | Ferrite Core, Cylindrical, 1Kohm/100Mhz, 500Mhz; Outer Diameter:6Mm; Product Length:10Mm; Inner Diameter:0.75Mm; Frequency Min:50Mhz; Frequency Max:500Mhz; Impedance:1.1Kohm; Product Range:- Rohs Compliant: Yes |Fair-Rite 2961666631 RoHS : Compliant |
| 12,000 | |
| 36663-0001 | Molex | Contact, 10Awg, Pin, Crimp; |Molex 36663-0001 (Alternate Part Number: 822348359387 RoHS : Compliant |
| 8,662 | ||
| 36663-0002 | Molex | Mlx Male Terminal 10-12 Awg Loose Cut Rohs Compliant: Yes |Molex 36663-0002 RoHS : Compliant |
| 4,129 | ||
| 36663-0002 | Molex | Contact, Pin, 12-10Awg, Crimp; |Molex 36663-0002 RoHS : Compliant |
| 2,307 | ||
| 2944666631 | Fair-Rite Products Corp | Cylindrical Core, 6Mm Od, 0.75Mm Id; |Fair-Rite 2944666631 RoHS : Compliant |
| 1,989 | ||
| 2961666631 | Fair-Rite Products Corp | Ferrite Core, 0.75Mm Id, 6Mm Od; |Fair-Rite 2961666631 RoHS : Compliant |
| 1,980 | ||
| 2966634 | Phoenix Contact | Plc Optocoupler, D/Rail, 24Dc/24Dc; |Phoenix Contact 2966634 RoHS : Compliant |
| 838 | ||
| LNK6663V | Power Integrations | Ac/Dc Conv, Flyback, -40 To 150Deg C; |Power Integrations LNK6663V RoHS : Compliant |
| 444 | ||
| 1776663 | Phoenix Contact | Terminal Block, Header, R/A, 18Way, Th; |Phoenix Contact 1776663 RoHS : Compliant |
| 41 | ||
| MAL213666332E3 | Vishay Intertechnologies | Cap, 3300?f, 25V, 20%, Through Hole; |Vishay MAL213666332E3 RoHS : Compliant |
| 7 | ||
| LCSN066632W | L-com Inc | Rack Cabinet, Signal White, 32U, 63.49"; |L-Com LCSN066632W RoHS : Compliant |
| 5 | ||
| LCSN066637 | L-com Inc | Rack Cabinet, Blk, 37U, 72.24", 23.62"; |L-Com LCSN066637 RoHS : Compliant |
| 3 | ||
| LCSN066637W | L-com Inc | Rack Cabinet, Signal White, 37U, 72.24"; |L-Com LCSN066637W RoHS : Compliant |
| 2 | ||
| W11266639 | Whirlpool | Chiller |Whirlpool W11266639 RoHS : Not Compliant |
| 1 | ||
| MAX6663AEE+ | Analog Devices Inc | Temperature Sensor, 1Deg C, Qsop-16; Available Until Stocks Are Exhausted |Analog Devices, Inc. MAX6663AEE+ RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX6663AEE+ | Analog Devices Inc | Temperature Monitors and PWM F RoHS : Compliant |
| 393 | |
| MAX6663AEE+T | Analog Devices Inc | Temperature Monitors and PWM F RoHS : Compliant |
| 0 | ||
![]() RS | 1SNA176663R0000 (017666300) | TE Connectivity | TERMINAL BLOCK JUMPERS / BRIDGES, ENTRELEC, BJM16, 2-POLE, SNA SERIES |
| 529 | |
| 8066639 | RS Pro | BRASS HEX NICKEL PLATED STANDOFF M5XM5 20MM BODY 8MM STUD 8MM WIDTH MALE/FEMALE |
| 239 | ||
| 66360-1 (4526663) | TE Connectivity | TYPE III SERIES, SIZE 16 FEMALE CRIMP CIRCULAR CONNECTOR CONTACT |
| 52 | ||
| 31666380 | SAB Bröckskes | HOOK-UP WIRE, 05V-K, PVC, 18AWG, WHITE/BLUE, UL AWM, UL MTW, CSA AWM, ROHS, CE, VDE |
| 24 | ||
| 2006663 | RS Pro | PLASTIC ENCLOSURE Z122 WHITE ABS |
| 15 | ||
| 2966663 (PLC-OSC-230UC/ 24DC/ 2) | Phoenix Contact | PLC-INTERFACE W/ SWITCH, SS RELAY, 230V, 33VDC, 3A, DIN RAIL NS 35/7,5, PLC-OSC |
| 10 | ||
| 1246663 | RS Pro | CABLE MOUNT CONNECTOR 4 POLE PLUG CRIMP 5A IP68 THREADED STRAIGHT |
| 5 | ||
| DSBC-40-200-PPVA-N3 (1376663) | Festo | STANDARD CYLINDER, G 1/4 PORTS, M12 ROD THREAD, 40MM PISTON DIA, 200MM STROKE |
| 5 | ||
| 63366 (63366-9) | Klein Tools Inc | RATCHET PAWL SET FOR PRE-2017 EDITION CAT. NO. 63060 |
| 3 | ||
| 426663 | ELESA USA | CFSW.110-6-1NO+3NC-C-B, HINGES WITH BUILT-IN SAFETY SWITCH, 8 POLE MALE CONNECT |
| 2 | ||
| 2796663 | RS Pro | HIGH TEMP MASK TAPE 19MM X 33MM |
| 2 | ||
| PLS UB9 (4966636) | Fluke Calibration | UB9 UNIVERSAL CEILING/WALL BRACKET |
| 2 | ||
| 8066663 | RS Pro | STEEL HEX NICKEL PLATED STANDOFF M6XM6 15MM BODY 10MM STUD MALE/FEMALE, 50 PACK |
| 1 | ||
| 6663607 | RS Pro | LPC-60-1400 CONSTANT CURRENT LED DRIVER 58.8W 9 - 42V 1.4A |
| 1 | ||
| 6663 | Olympic Wire & Cable Corp | CABLE, 2C, 10AWG |
| 0 | ||
![]() Microchip Technology Inc | ATA6663-GAQW | Microchip Technology Inc | LIN Transceiver, SOIC, Projected EOL: 2041-01-29 RoHS : Compliant |
| 64,000 | |
ATA6663-FAQW-1![]() | Microchip Technology Inc | LIN Transceiver, VDFN, Projected EOL: 2041-02-06 RoHS : Compliant |
| 1,785 | ||
| JAN1N6663US | Microchip Technology Inc | Std Rectifier _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 314 | ||
| JANTX1N6663 | Microchip Technology Inc | Std Rectifier _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 260 | ||
| 1N6663US | Microchip Technology Inc | Std Rectifier _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 93 | ||
| JANTX1N6663US | Microchip Technology Inc | Std Rectifier _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 51 | ||
| ATA6663-EK | Microchip Technology Inc | ATA6663-EK, Projected EOL: |
| 9 | ||
| 1N6663 | Microchip Technology Inc | Std Rectifier _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N6663 | Microchip Technology Inc | Std Rectifier _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N6663/TR | Microchip Technology Inc | Std Rectifier _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| ATA6663-GAQW-V03 | Microchip Technology Inc | LIN Transceiver, SOIC, Projected EOL: 2046-05-08 - Contact for Pricing RoHS : Compliant | 0 | |||
| ATA6663-GAQW-V02 | Microchip Technology Inc | LIN Transceiver, SOIC, Projected EOL: 2046-05-08 - Contact for Pricing RoHS : Compliant | 0 | |||
| ATA6663-FAQW-1V19 | Microchip Technology Inc | LIN Transceiver, VDFN, Projected EOL: 2051-06-30 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSA6103BL3B-006.6633VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 20ppm, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-08-25 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSA6103BL3B-006.6633TVAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 20ppm, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-08-25 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | MS35266-63 | MS MACHINE SCREWS | 32 | |||
| 4566-632-SS | RAF Electronic Hardware | 29 | ||||
| 4566-632-S-12 | RAF Electronic Hardware | 27 | ||||
| 2266-632-SS-20 | RAF Electronic Hardware | 21 | ||||
| 1SNA176663R0000 | ABB Group | 20 | ||||
| 8066-632-S-5 | RAF Electronic Hardware | 19 | ||||
| 66666-3869 | Amatom Electronic Hardware | 15 | ||||
| 66666-3418 | Amatom Electronic Hardware | 12 | ||||
| 435-6663-01-00-00 | Cambion Electronics Ltd | 3 | ||||
JANTX1N6663![]() | Microsemi Corporation (now Microchip) | RoHS : Not Compliant | 1 | |||
![]() Rochester Electronics | MCH6663-TL-W | onsemi | MOSFET N and P-Channel 30V 1.8A (Ta), 1.5A (Ta) 6-SMD T/R RoHS : Compliant |
| 1,492,900 | |
| 2SK3666-3-TB-E | onsemi | JFET Single 30V 200mW SOT-23-3 T/R RoHS : Compliant |
| 639 | ||
![]() Sager | 1-2176663-0 | TE Connectivity | MELF SMA-Q 1M91 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | |
| 6766634-1 | TE Connectivity | Heavy Duty Power Connectors CONN,PIN,LWR DRAWER RoHS : Compliant |
| 0 | ||
| 6-2176663-5 | TE Connectivity | MELF SMA-Q 7M15 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| EA1-B0-66-635-12A-DD | Carling Technologies | Circuit Breakers EA1B06663512ADD RoHS : Compliant |
| 0 | ||
| EA3-B0-66-630-12A-GB | Carling Technologies | Circuit Breakers EA3B06663012AGB RoHS : Compliant |
| 0 | ||
| 466634-2 | TE Connectivity | Bench Top Tools HDM SMPR042F090FKSA | 0 | |||
| 7-2266633-7 | TE Connectivity | TE Connectivity OCEAN_2.0_SPARE_PART_KIT-070F110OV |
| 0 | ||
| 7-2266638-2 | TE Connectivity | TE Connectivity OCEAN_2.0_Applicator-S-110F180FA | 0 | |||
| 4-2176663-7 | TE Connectivity | MELF SMA-Q 4M64 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| CA3-B0-26-663-311-E | Carling Technologies | Circuit Breakers CA3B026663311E RoHS : Compliant | 0 | |||
| IEG666-31732-2-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IEGBX666-35616-1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IEGH666-32738-3-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IEGHF666-32249-40-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IEGF666-30298-343-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
![]() ComSIT USA | MAL213666331E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Through Hole Mount RoHS : Compliant | 1,000 | ||
![]() Interstate Connecting Components | 1-2176663-0 | TE Connectivity | MELF SMA-Q 1M91 1% 50PPM 0204 RoHS : Compliant | 0 | ||
| 6766634-1 | TE Connectivity | CONN,PIN,LOWER DRAWER RoHS : Compliant |
| 0 | ||
| 6-2176663-5 | TE Connectivity | MELF SMA-Q 7M15 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 7-2266633-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-070F1 |
| 0 | ||
| 4-2176663-7 | TE Connectivity | MELF SMA-Q 4M64 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 9656663001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC44A0111-16-9CK0001 | 0 | |||
| 4-2176663-6 | TE Connectivity | MELF SMA-Q 4M53 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 155666-3121 | ITT Interconnect Solutions | MKJ4C10T12-37BC | 0 | |||
| 2176663-5 | TE Connectivity | MELF SMA-Q 1M69 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 2321666-3 | TE Connectivity | ZQSFP+ STACKED REC ASSEMBLY 2X | 0 | |||
| 5617896-663 | Glenair Inc | 0 | ||||
| 4-2176663-9 | TE Connectivity | MELF SMA-Q 4M87 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 749-1266-6-300.00 | Glenair Inc | 0 | ||||
| 6-2176663-4 | TE Connectivity | MELF SMA-Q 6M98 1% 50PPM 0204 RoHS : Compliant | 0 | |||
| 5006663001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55/9961-28-8/9(LAT3) RoHS : Compliant | 0 | |||
![]() NexGen Digital | 2944666631 | Fair-Rite Products Corp | RoHS : Compliant | 123 | ||
![]() Powell Electronics | 666390-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 31,086 | |
| 87666-3 | TE Connectivity | TE COMPONENT 87666-3 RoHS : Compliant |
| 24,750 | ||
| 166633-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 16,035 | ||
| 9656663001 | TE Connectivity | Connectors |
| 10,879 | ||
| 6766638-1 | TE Connectivity | Backplane Connectors RoHS : Compliant |
| 2,563 | ||
| 4-1437666-3 | TE Connectivity | Connectors RoHS : Compliant |
| 1,313 | ||
| 104666-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 292 | ||
| 666300-000 | TE Connectivity | backshells, RoHS : Not Compliant |
| 17 | ||
| F866633001 | TE Connectivity | shrink tube RoHS : Compliant |
| 17 | ||
| 88-444666-32W | Amphenol Corporation | PLUG |
| 9 | ||
| 87-444666-35T | Amphenol Corporation | PLUG |
| 7 | ||
| 88-444666-35S | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-32S | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-30P | Amphenol Corporation | PLUG |
| 2 | ||
| 88-444666-32P | Amphenol Corporation | PLUG |
| 2 | ||
![]() Chip 1 Exchange | 2943666631 | Fair-Rite Products Corp | INSTOCK RoHS : Compliant | 884 | ||
![]() Avnet Abacus | 1558666-3 | TE Connectivity | (Alt: 1558666-3) RoHS : Compliant | 35,170 | ||
| 1766637 | Phoenix Contact | FRONT 25HSA 510 MIX FRONT25HSA510MIX (Alt: 1766637) RoHS : Compliant | 0 | |||
| 1066636 | Phoenix Contact | SPT 5 4H75ZB MCBKGN SPT54H75ZBMCBKGN (Alt: 1066636) RoHS : Compliant | 0 | |||
| 166632-1 | TE Connectivity | (Alt: 166632-1) RoHS : Compliant | 0 | |||
| 166632-1 | TE Connectivity | (Alt: 166632-1) RoHS : Compliant | 0 | |||
| 6766634-1 | TE Connectivity | CONNPINLOWER DRAWER (Alt: 6766634-1) RoHS : Compliant | 0 | |||
| 6766634-1 | TE Connectivity | CONNPINLOWER DRAWER (Alt: 6766634-1) RoHS : Compliant | 0 | |||
| 366630001 | Molex | Contact PIN Crimp ST Cable Mount Reel - Tape and Reel (Alt: 366630001) RoHS : Compliant | 0 | |||
| 366630001 | Molex | Contact PIN Crimp ST Cable Mount Reel - Tape and Reel (Alt: 366630001) RoHS : Compliant | 0 | |||
| 1766663-6 | TE Connectivity | (Alt: 1766663-6) RoHS : Compliant | 0 | |||
| 9656663001 | TE Connectivity | Single Conductor Cable 16AWG Tin Plated Copper White 600V (Alt: 9656663001) RoHS : Compliant | 0 | |||
| F666393001 | TE Connectivity | (Alt: F666393001) RoHS : Compliant | 0 | |||
| 2944666631 | TE Connectivity | Ind Bead 690 Ohm 100MHz Radial TR (Alt: 2944666631) RoHS : Compliant | 0 | |||
| 1241.6663.1111000 | Schurter Electronic Components | (Alt: 1241.6663.1111000) RoHS : Compliant | 0 | |||
| 1241.6663.1122000 | Schurter Electronic Components | (Alt: 1241.6663.1122000) RoHS : Compliant | 0 | |||
![]() Avnet Asia | LNK6663K-TL | Power Integrations | (Alt: LNK6663K-TL) RoHS : Compliant | 0 | ||
| 1558666-3 | TE Connectivity | (Alt: 1558666-3) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ATA6663-GAQW | Microchip Technology Inc | Interface ICs (Alt: ATA6663-GAQW) RoHS : Compliant | 0 | ||
ATA6663-FAQW-1![]() | Microchip Technology Inc | Interface ICs (Alt: ATA6663-FAQW-1) RoHS : Compliant | 0 | |||
| 5962F9666301VXC | Renesas Electronics Corporation | (Alt: HS9-26C31RH-Q) RoHS : Compliant | 0 | |||
| 5962F9666301QXC | Renesas Electronics Corporation | (Alt: HS9-26C31RH-8) RoHS : Compliant | 0 | |||
| 5962F9666304VYC | Renesas Electronics Corporation | (Alt: HS9G-26CLV31EH-Q) RoHS : Compliant | 0 | |||
| 5962F9666304VXC | Renesas Electronics Corporation | FLATPACK 16MRadiation Hardened 33V Quad Differential Line Drivers (Alt: HS9-26CLV31EH-Q) RoHS : Compliant | 0 | |||
| 5962F9666302VXC | Renesas Electronics Corporation | (Alt: HS9-26CLV31RH-Q) RoHS : Compliant | 0 | |||
| 5962F9666303VXC | Renesas Electronics Corporation | FLATPACK 16MRadiation Hardened Quad Differential Line Driver (Alt: HS9-26C31EH-Q) RoHS : Compliant | 0 | |||
| 5962F9666301VYC | Renesas Electronics Corporation | (Alt: HS9G-26C31RH-Q) RoHS : Compliant | 0 | |||
| 5962F9666302VYC | Renesas Electronics Corporation | (Alt: HS9G-26CLV31RH-Q) RoHS : Compliant | 0 | |||
| 5962F9666302QXC | Renesas Electronics Corporation | (Alt: HS9-26CLV31RH-8) RoHS : Compliant | 0 | |||
| 5962F9666301VEC | Renesas Electronics Corporation | (Alt: HS1-26C31RH-Q) RoHS : Not Compliant | 0 | |||
| 5962F9666303VXCS2793 | Renesas Electronics Corporation | (Alt: HS9-26C31EH-QS2793) RoHS : Compliant | 0 | |||
| 5962F9666302VYC-SLDC | Renesas Electronics Corporation | 16 Ld FLATPACKMRadiation Hardened 33V Quad Differential Line Drivers HS9G26CLV31RHQ (Alt: HS9G-26CLV31RH-QS2793) RoHS : Compliant | 0 | |||
| 5962F9666302VXCS2793 | Renesas Electronics Corporation | CFPAK16RAD HARD 33V RS422 CMOS LINE TRANSMITTERFLATPACKCLASS V (Alt: HS9-26CLV31RH-QS2793) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2944666631 | Fair-Rite Products Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 439 | |
| C06663 | Hammond Manufacturing | IN STOCK SHIP TODAY |
| 398 | ||
| 5-104666-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 307 | ||
| MCH6663-TL-W | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 146 | ||
![]() DB Roberts | 4566-632-N | RAF Electronic Hardware | 0 | |||
| 4066-632-A-22 | RAF Electronic Hardware | 0 | ||||
| 4566-632-SS-26 | RAF Electronic Hardware | 0 | ||||
| 2266-632-A-7 | RAF Electronic Hardware | 0 | ||||
| 4566-632-S-12 | RAF Electronic Hardware | 0 | ||||
| 1866-632-N | RAF Electronic Hardware | 0 | ||||
| 4566-632-A | RAF Electronic Hardware | 0 | ||||
| 4566-632-AL | RAF Electronic Hardware | 0 | ||||
| SPL56663A | Spiralock | #6-40 SPL 3RS MP B TiN Standard New Taps | 0 | |||
| 1766-632-A-24 | RAF Electronic Hardware | 0 | ||||
| 496663 | Essentra Components | 0 | ||||
| 4566-632-B | RAF Electronic Hardware | 1/4 HEX X 3.00 LENGTH | 0 | |||
| 4066-632-AL-22 | RAF Electronic Hardware | 0 | ||||
| 4566-632-SS-20 | RAF Electronic Hardware | STINLESS HEX-M/F STNDOFF | 0 | |||
| 4566-632-SS | RAF Electronic Hardware | STANDOFF, 8-32 X 3 M-F, 1/4 HEX SS | 0 | |||
![]() EBV Elektronik | LNK6663V | Power Integrations | Off Line Switcher 11Pin EDIPB (Alt: LNK6663V) RoHS : Compliant | 0 | ||
| LNK6663E | Power Integrations | Off Line Switcher 6Pin ESIPC (Alt: LNK6663E) RoHS : Compliant | 0 | |||
| LNK6663K-TL | Power Integrations | (Alt: LNK6663K-TL) RoHS : Compliant | 0 | |||
| 1N6663US/TR | Microchip Technology Inc | (Alt: 1N6663US/TR) RoHS : Compliant | 0 | |||
| ATA6663-GAQW | Microchip Technology Inc | Interface ICs (Alt: ATA6663-GAQW) RoHS : Compliant | 0 | |||
| ATA6663-TAQY | Microchip Technology Inc | LIN Transceiver 1TX 1RX 20KBd 8Pin SO TR (Alt: ATA6663-TAQY) RoHS : Compliant | 0 | |||
| JAN1N6663US/TR | Microchip Technology Inc | Std Rectifier ABody Sq Melf (Alt: JAN1N6663US/TR) RoHS : Compliant | 0 | |||
ATA6663-FAQW-1![]() | Microchip Technology Inc | Interface ICs (Alt: ATA6663-FAQW-1) RoHS : Compliant | 0 | |||
| BFR182E6663HTSA1 | Infineon Technologies AG | RF Bipolar Transistor NPN 12 V 250 mW 35 mA SOT23 3 Pins (Alt: SP000011052) RoHS : Compliant | 0 | |||
| JANTX1N6663US/TR | Microchip Technology Inc | DIODE GP 600V 500MA A SQMELF (Alt: JANTX1N6663US/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | MCH6663-TL-W | onsemi | Stock, Ship Today RoHS : Compliant |
| 108,000 | |
| 2SK3666-3-TB-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 17,890 | ||
![]() Master Electronics | 1-2176663-0 | TE Connectivity | MELF SMA-Q 1M91 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | |
| 6766634-1 | TE Connectivity | Heavy Duty Power Connectors CONN PIN LWR DRAWER MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6-2176663-5 | TE Connectivity | MELF SMA-Q 7M15 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| EA1-B0-66-635-12A-DD | Carling Technologies | Single-pole hydraulic-magnetic circuit breaker with 35A current rating 50/60Hz long time delay and hi-inrush capability. RoHS : Compliant |
| 0 | ||
| EA3-B0-66-630-12A-GB | Carling Technologies | Circuit Breaker E-Series Hydraulic-Magnetic | Carling Technologies EA3-B0-66-630-12A-GB RoHS : Compliant |
| 0 | ||
| 7-2266633-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-070F110OV RoHS : Compliant |
| 0 | ||
| 4-2176663-7 | TE Connectivity | MELF SMA-Q 4M64 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| CA3-B0-26-663-311-E | Carling Technologies | CA3B026663311E RoHS : Compliant |
| 0 | ||
| IEGHF666-32249-40-V | Sensata Circuit Breakers | RoHS : Compliant |
| 0 | ||
| IEGF666-30298-343-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 666/3G | APEM Inc | Switch Toggle ON ON 4PDT Round Lever Quick Conn 10A 30VDC Panel Mount with Threads RoHS : Compliant |
| 0 | ||
| 4-2176663-6 | TE Connectivity | MELF SMA-Q 4M53 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 155666-3121 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 2176663-5 | TE Connectivity | MELF SMA-Q 1M69 1% 50PPM 0204 0.4W RoHS : Compliant |
| 0 | ||
| 2266635-2 | TE Connectivity | OCEAN-2.0-APPLICATOR-S-140F176FA RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 66630096016 | HARTING Technology Group | Interface Modules INDUCOM CANINTERFACE PL2 RoHS : Compliant |
| 50 | |
| 1776663 | Phoenix Contact | Pluggable Terminal Blocks 18 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 45 | ||
| 0816663 | Phoenix Contact | Terminal Block Tools & Accessories EML (10X7)R RoHS : Compliant |
| 15 | ||
| 666/3 | APEM Inc | Toggle Switches Toggle Switch ON - ON, Qk Connect RoHS : Compliant |
| 4 | ||
| D4RD-2666-32G | Synology Inc | 32GB RDIMM ECC RAM DDR4-2666 |
| 2 | ||
| 2966663 | Phoenix Contact | Solid State Relay, In 230VAC/220VDC, Out 3-33 VDC 3 A, PLC-OSC-230UC/24DC/2 RoHS : Compliant |
| 0 | ||
| 2966634 | Phoenix Contact | Solid State Relays - Industrial Mount PLC-OSC- 24DC/24DC/2 RoHS : Compliant |
| 0 | ||
| 3046663 | Phoenix Contact | Component Terminal Block, Screw, 2row 4Conn, 500V 24A, 12-26AWG, UTTB 2,5-DIO/U-O RoHS : Compliant |
| 0 | ||
| 66630095013 | HARTING Technology Group | D-Sub Standard Connectors MVB Backbone Interf Set for 4-conduct RoHS : Compliant |
| 0 | ||
| AXG96663 | Axiom Manufacturing | AXIOM MPO-4 LC OS2 BREAKOUT CABLE 4M |
| 0 | ||
![]() Pasternack Enterprises US | PE34666-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Cable 36 Inch Length Using PE-C400 Coax., Radio frequency assembly N male to N male cable 36 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male cable 36 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34666-36, can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE34666-36 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 36 inch length using PE-C400 coax. |
| 3,584 | |
| PE3666-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly N male to TNC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to TNC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3666-36, can also be known as a N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3666-36 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3666-36 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 36 inch length using RG400 coax. |
| 3,486 | ||
| PE3C6663 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable using LMR-400-DB coax. | 924 | |||
| PE3C7666-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. QMA Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly QMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-195 coax, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle QMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle QMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C7666-36 can also be known as a low loss right angle QMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. QMA plug to TNC plug cable assembly PE3C7666-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency QMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7666-36 can also be used in the other direction and will be right angle TNC male to right angle QMA male cable assembly if the opposite connectivity is required. Low loss QMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to TNC cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-195 coax. |
| 233 | ||
| PE3C6663-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male to BNC Male Low Loss Cable 100 CM Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 100 cm length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 100 cm length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-100CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-100CM is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 100 cm length using LMR-400-DB coax. |
| 113 | ||
| PE3C6663-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-12, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-12 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 12 inch length using LMR-400-DB coax. |
| 113 | ||
| PE3C6663-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. BNC Male to BNC Male Low Loss Cable 150 CM Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 150 cm length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 150 cm length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-150CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-150CM is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 150 cm length using LMR-400-DB coax. |
| 113 | ||
| PE3C6663-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. BNC Male to BNC Male Low Loss Cable 200 CM Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 200 cm length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 200 cm length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-200CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-200CM is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 200 cm length using LMR-400-DB coax. |
| 113 | ||
| PE3C6663-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 36 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-36, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-36 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 36 inch length using LMR-400-DB coax. |
| 88 | ||
| PE3C6663-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-400-DB Coax., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-400-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low loss cable 24 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C6663-24, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C6663-24 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 24 inch length using LMR-400-DB coax. |
| 79 | ||
| PE3W16663 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using PE-P195 Coax. PE3W16663 is a SHV jack bulkhead to SHV jack bulkhead cable using PE-P195 coax. This Pasternack SHV jack bulkhead to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16663 SHV jack bulkhead to SHV jack bulkhead cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W06663 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to N Male Right Angle Cable Using LMR-195 Coax. PE3W06663 is a QMA male right angle to N male right angle cable using LMR-195 coax. This Pasternack QMA male right angle to N male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. QMA right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06663 QMA male right angle to N male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16663LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using PE-P195 Coax, LF Solder. PE3W16663LF is a SHV jack bulkhead to SHV jack bulkhead cable using PE-P195 coax. This Pasternack SHV jack bulkhead to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16663LF SHV jack bulkhead to SHV jack bulkhead cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE33666-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMB Plug to SMB Plug Right Angle Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly SMB plug to SMB plug right angle cable 36 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug right angle cable 36 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and right angle SMB cable connection on the other. Our SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE33666-36, can also be known as a SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE33666-36 is built with RG58 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33666-36 can also be used in the other direction and will be right angle SMB plug to SMB plug cable assembly if the opposite connectivity is required. SMB male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug right angle cable 36 inch length using RG58 coax. |
| 0 | ||
| PE3C0666-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length: 36 inches. 2.92mm Male to 2.92mm Male Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 36 inch length using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C0666-36, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C0666-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 36 inch length using PE-P086 coax. |
| 0 | ||
![]() Vyrian | MCH6663-TL-W | onsemi | Small Signal Field-Effect Transistor, 1.8A I(D), 30V, 2-Element, N-Channel and P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 12,969 | ||
| 2966663 | Phoenix Contact | Relays/Accessories RoHS : Compliant | 12,899 | |||
| 2-328666-3 | TE Connectivity | Connector Accessory, Ferrule-stepped, Copper Alloy RoHS : Compliant | 9,373 | |||
| 1N6663US | Microchip Technology Inc | Rectifier Diode, 1 Phase, 1 Element, 0.5A, Silicon, DO-35 RoHS : Not Compliant | 8,988 | |||
| MAX6663AEE+ | Analog Devices Inc | Analog Voltage Output Sensor, 0.8V Min, 2.6V Max, 1Cel, Rectangular, Surface Mount RoHS : Compliant | 8,086 | |||
| 1776663 | Phoenix Contact | Modular Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,945 | |||
| 1766631 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,570 | |||
| JANTX1N6663 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 1 Element, 0.5A, 600V V(RRM), Silicon, DO-35 RoHS : Not Compliant | 7,328 | |||
| JANTX1N6663US | Microchip Technology Inc | Rectifier Diode, 1 Phase, 1 Element, 0.5A, Silicon, DO-35 RoHS : Not Compliant | 7,095 | |||
| KSE166632 | Kingston Technology Company | 6,960 | ||||
V62/06663-01XE![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.5V Min, 5.5V Max, PMOS, PDSO8 RoHS : Compliant | 5,459 | |||
| MAX6663AEE+T | Analog Devices Inc | Analog Voltage Output Sensor, 1uA, 1Cel, Rectangular, Surface Mount RoHS : Compliant | 4,945 | |||
| PT2568-4-906663 | AMD Xilinx | 4,161 | ||||
| MAX6663AEE-T | Maxim Integrated Products | Analog Voltage Output Sensor, 0.8V Min, 2.6V Max, 1Cel, Rectangular, Surface Mount RoHS : Not Compliant | 874 | |||
| MAX6663AEE | Maxim Integrated Products | Analog Voltage Output Sensor, 0.8V Min, 2.6V Max, 1Cel, Rectangular, Surface Mount RoHS : Not Compliant | 283 | |||
![]() Win Source Electronics | AOZ6663DI | Alpha & Omega Semiconductor | POWER IC EZBUCK RoHS : Compliant |
| 217,861 | |
| ATA6663-GAQW | Atmel Corporation |
| 13,000 | |||
ATA6663-FAQW-1![]() | Microchip Technology Inc | IC TXRX LIN DUAL 8DFN RoHS : Compliant |
| 12,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |