| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow |
 Braemac Americas-Symmetry | 3990251716
| Telit | WE866C3-P M.2 IF ADAPTER | | 1
 |
CAB.457167168.DA
| Taoglas Antenna Solutions | 1x CAB.01457, 1x CAB.02164, 1x CAB.02168 - TGC-200-Braided | 100 : $71.63 500 : $57.25 1,000 : $32.25
|
| 0
 |
ABM7-16.000MHZ-D2Y-T
| Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD | | 0
 |
ABM7-16.000MHZ-B4-T
| Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD | | 0
 |
ABM7-16.000MHZ-4-T
 | Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD RoHS : Compliant | | 0
 |
AX7DAF1-716.8000T
 | Abracon Corporation | XTAL OSC XO 716.8000MHZ LVDS SMD RoHS : Compliant | | 0
 |
ABS07-166-32.768KHZ-T
 | Abracon Corporation | IOT 32.786KHZ XTAL RoHS : Compliant | | 0
 |
EVALAG7161
| Silver Telecom Ltd | AG7100 and AG6100 Evaluation Board | | 0
 |
I538-2O7-16.000 MHZ
| Abracon Corporation | | | 0
 |
 DB Roberts | VC-937-16 YELLOW
| Caplugs | | 1 : $0.4821 100 : $0.3388 500 : $0.2667 1,000 : $0.2199 1,750 : $0.2199
|
| 1,750
 |
SHS1/4-28X7/16-SS-CP
| SOCKET HEAD SET SCR | Socket Head Set Screw | 1 : $0.1253 100 : $0.088 233 : $0.088
|
| 233
 |
C3657-16D
| Accuride International | Moderate use supports 273 lbs. | 1 : $191.2308 2 : $191.2308
|
| 2
 |
716
| Pop Rivets | FAM400-263 | | 0
 |
CAL1-3716-150
| SHEREX FASTENING SO | RNUT 3/8-16 150 SS302 LG FLG RNUT 3/8-16 150 SS302 LG FLG | | 0
 |
SPFT7/16A
| Essentra Components | 716IN FEMALE THREAD MASKSILICO | | 0
 |
125M37-16-02
| Tech-Etch | 125M37-15.98-02 | | 0
 |
20572716
| Essentra Components | 66 MM TUBE END PLUGLDPE NATURA | | 0
 |
3045B-440BMODL=.237-16
| RAF Electronic Hardware | | | 0
 |
2396-3716-S
| RAF Electronic Hardware | | | 0
 |
1964-3716-S
| RAF Electronic Hardware | | | 0
 |
4716
| Heyco | SSRPT-220 NATURAL | | 0
 |
FL5-HS-3716S
| SHEREX FASTENING SO | | | 0
 |
78030-03716
| Pop Rivets | EMHART EXTENDED NOSEPIECE 1663 | | 0
 |
ESR-7-16
| Sugatsune Kogyo Co Ltd | | | 0
 |
 Master Electronics | 2716716
| Phoenix Contact | Device terminal block - for direct mounting - 3-pos. RoHS : Compliant | | 74
 |
716
| General Tools & Instruments LLC | RoHS : Compliant | 10 : $9.63 5 : $14.33 1 : $16.3
|
| 1
 |
716
| Philmore | Conn TNC-Type N Adapter M/M 0Hz to 11GHz 50Ohm RA Nickel RoHS : Compliant | 250 : $5.41 100 : $5.7 50 : $6.0 25 : $6.31 10 : $6.65 5 : $6.99 2 : $7.36
|
| 0
 |
7-1623771-6
| TE Connectivity | C3A 2R0 5% AMMO PK MOQ Reduction RoHS : Compliant | 5,000 : $0.632 3,750 : $0.645 2,500 : $0.815 1,250 : $1.32
|
| 0
 |
7-1614971-6
| TE Connectivity | CPF 1206 53R6 0.1% 25PPM 1K RL RoHS : Compliant | 100,000 : $0.0956 50,000 : $0.1338 25,000 : $0.1625 10,000 : $0.1791 8,000 : $0.1865 5,000 : $0.1971 3,000 : $0.2 1,000 : $0.2091
|
| 0
 |
1716716
| Phoenix Contact | FKIC 2 5/ 6-ST-5 08 BK RoHS : Compliant | 7,500 : $2.24 5,000 : $2.27 2,500 : $2.3 1,000 : $2.36 500 : $2.39 250 : $2.53 100 : $2.68 50 : $2.85
|
| 0
 |
C115371-6200
| C&K Switches | HiRel RoHS : Compliant | 100 : $113.38 50 : $114.89 20 : $118.04 10 : $123.1 5 : $128.61 1 : $138.98
|
| 0
 |
C115371-6282
| C&K Switches | HiRel RoHS : Compliant | 5 : $350.56 3 : $355.43 1 : $360.44
|
| 0
 |
C115371-6570
| C&K Switches | HiRel RoHS : Compliant | 100 : $222.76 50 : $228.62 20 : $231.67 10 : $238.01 5 : $241.32 1 : $248.21
|
| 0
 |
C115371-6606
| C&K Switches | HiRel RoHS : Compliant | 100 : $222.45 50 : $228.3 20 : $231.35 10 : $237.68 5 : $240.98 1 : $247.87
|
| 0
 |
C115371-6651
| C&K Switches | HiRel RoHS : Compliant | 100 : $165.32 50 : $169.67 20 : $171.93 10 : $176.64 5 : $179.1 1 : $184.21
|
| 0
 |
C115371-6688
| C&K Switches | HiRel RoHS : Compliant | 5 : $532.5 3 : $533.83 1 : $548.87
|
| 0
 |
C115371-6895
| C&K Switches | HiRel RoHS : Compliant | 5 : $645.15 3 : $646.77 1 : $664.99
|
| 0
 |
TSW-107-16-F-D-LA
| Samtec Inc | RoHS : Compliant | 7,500 : $0.587 5,000 : $0.603 2,500 : $0.767 1,000 : $0.871 500 : $1.209 250 : $1.266 25 : $1.558
|
| 0
 |
TSW-107-16-L-Q-LL
| Samtec Inc | RoHS : Compliant | 7,500 : $0.851 5,000 : $0.853 2,500 : $1.041 1,000 : $1.157 500 : $1.478 250 : $1.522 100 : $1.594 25 : $1.962
|
| 0
 |
 Neutron USA | AJ716BST
| StarTech | 8GB FIBRE CHANNEL SHORTWAVE SFP+ HP AJ716B COMPATIBLE MM LC | | 50
 |
D217169
| Mersen Electrical Power | Ferrule Fuse-Link, Size 10.3 x 38 gG, 120 kA, 500VAC, 8A, No Indicator RoHS : Compliant | | 10
 |
71-635.0/D
| EAO AG | Switch Actuators 3 POS KYLK MNTMNT-C RoHS : Compliant | | 7
 |
09474747161
| HARTING Technology Group | Ethernet Cables / Networking Cables RJICORD 8XAWG26/7 CRO. OVERM 10M | | 1
 |
IP7161
| VIVOTEK | Vivotek IP7161 Day & Night Fixed Network Camera | | 1
 |
2716716
| Phoenix Contact | Device Terminal Block, G 10/3, 2row 3pos 6conn, 800V 57A, 20-6AWG, Screw RoHS : Compliant | | 0
 |
TD-71622
| Macromatic Industrial Controls Inc | Relay 10 A 120 VAC&frasl VDC 0.05 Sec. to 999 Hours Plug-in DPDT -28 ° | | 0
 |
TWAS-71630
| Jonard Tools | Wrenches TORQUE WRENCH SPEED HEAD 30 INCH LBS. | | 0
 |
1757161
| Phoenix Contact | PCB Connector, Female, 1row 17 Pos, 5.08mm pitch, 24-12 AWG Screw, MSTB 2,5/17-ST-5,08 RoHS : Compliant | | 0
 |
2716680
| Phoenix Contact | Insertion Bridge 10pos, pitch: 6.15 mm, Blue, EB 10- DIK BU RoHS : Compliant | | 0
 |
C3971-67903-AX
| Axiom Manufacturing | MAINTENANCE KIT HP LASERJET 8000 | | 0
 |
E797162
| Elo Touch Solutions Inc | FLR STAND BASE REQUIRES TOP E796965 FOR COMPLETE FLR STAND | | 0
 |
7024-17161-9730020
| Murrelektronik GmbH | Circular DIN Connectors M12 male receptacle A-cod. FM F&B Pro, wires PP 8x0.25 0,2m RoHS : Compliant | | 0
 |
TRF2716AALB465-AO
| AddOn Networks | AddOn Opnext TRF2716AALB465 Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC) | | 0
 |
FMAC-0A27-1613
| Schurter Electronic Components | Power Line Filters FMAC-Out Output fltr 3-phase 16A RoHS : Compliant | | 0
 |
 Pasternack Enterprises US | PE3971-6
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. N Male to N Female Bulkhead Cable 6 Inch Length Using PE-SR405FL Coax., Radio frequency assembly N male to N female bulkhead cable 6 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 6 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3971-6, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3971-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3971-6 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 6 inch length using PE-SR405FL coax. | 1 : $149.99 25 : $142.49 50 : $134.99 100 : $128.99
|
| 106
 |
PE3C1271-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male right angle to TNC male right angle low loss cable 60 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to TNC male right angle low loss cable 60 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C1271-60, can also be known as a low loss right angle N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1271-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1271-60 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 60 inch length using PE-P142LL coax, RoHS. | 1 : $663.99 25 : $630.79 50 : $597.59
|
| 0
 |
PE3W00716LF
| Pasternack Enterprises | | | 0
 |
PE3W06371-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to N Male Low Loss Cable 60 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly N male right angle to N male low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 60 inch length using LMR-400 coax with Times Microwave components, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and type N cable connection on the other. Our low loss right angle type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W06371-60 can also be known as a low loss right angle N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W06371-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06371-60 can also be used in the other direction and will be N type male to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 60 inch length using LMR-400 coax with Times Microwave components. | 1 : $117.99 25 : $112.09 50 : $106.19 100 : $101.47
|
| 0
 |
PE3W17161
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to N Female Bulkhead Cable Using LMR-240-DB Coax. PE3W17161 is a BNC male right angle to N female bulkhead cable using LMR-240-DB coax. This Pasternack BNC male right angle to N female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. BNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17161 BNC male right angle to N female bulkhead cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE3W20716
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Jack to BNC Female Cable Using RG178 Coax. PE3W20716 is a MMCX jack to BNC female cable using RG178 coax. This Pasternack MMCX jack to BNC female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BNC for connector 2. Our jack MMCX to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20716 MMCX jack to BNC female cable assembly is constructed with RG178 coax. | | 0
 |
PE3W17160
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Cable Using LMR-195-UF Coax. PE3W17160 is a BNC male right angle to SMA male cable using LMR-195-UF coax. This Pasternack BNC male right angle to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17160 BNC male right angle to SMA male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE3C7716
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. | | 0
 |
PE3C9716LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to MMCX Plug Right Angle Cable Using LMR-100 Coax, LF Solder. PE3C9716LF is a reverse polarity TNC female bulkhead to MMCX plug right angle cable using LMR-100A coax. This Pasternack reverse polarity TNC female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MMCX for connector 2. TNC to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C9716LF TNC reverse polarity female bulkhead to MMCX plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE3W05716
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm SMC Plug to 75 Ohm TNC Female Bulkhead Cable Using 75 Ohm RG59 Coax. PE3W05716 is a SMC plug to TNC female bulkhead cable using RG59 coax. This Pasternack SMC plug to TNC female bulkhead cable assembly uses a 75 Ohm SMC for connector 1 and a 75 Ohm TNC for connector 2. Our plug SMC to female TNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W05716 SMC plug to TNC female bulkhead cable assembly is constructed with RG59 coax. | | 0
 |
PE33716LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MCX Jack to MCX Plug Cable Using RG188 Coax, LF Solder. PE33716LF is a MCX jack to MCX plug cable using RG188 coax. This Pasternack MCX jack to MCX plug cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. Our jack MCX to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33716LF MCX jack to MCX plug cable assembly is constructed with RG188 coax. | | 0
 |
PE37163LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75. 75 Ohm F Male to 75 Ohm F Male Cable Using 75 Ohm RG6 Coax, LF Solder, RoHS. PE37163LF is a F type male to F type male cable using RG6 coax. This Pasternack type F male to type F male cable assembly uses a 75 Ohm type F for connector 1 and a 75 Ohm type F for connector 2. Our male type F to male type F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE37163LF F type male to F type male cable assembly is constructed with RG6 coax. | | 0
 |
PE3FCA716-1M
| Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: MPO (w/o pins), Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. MPO/UPC Female (w/o pins) to MPO/UPC Female (w/o pins), 8 Fiber, Type B, Single Mode OS2, OFNP Jacket-1M. Pasternack’s PE3FCA716-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with MPO (w/o pins)/UPC key up to MPO (w/o pins)/UPC key up connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions.This cable comes with 8-fiber MPO connectivity, which is optimized for compact parallel optics applications and supports BiDi, 40G, and 100G optical network architectures. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as 40G/100G BiDi and parallel optics network connections in data centers, high-density switch uplink and aggregation cabling applications, MPO-to-LC breakout connectivity for duplex transceiver deployments, compact backbones for enterprise and telecom, spine-to-leaf architecture links supporting scalable network growth, structured fiber cabling for server rooms and equipment racks and migration-ready single mode infrastructure for next-generation optical networks. With the flexibility of custom lengths, the PE3FCA716-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA716-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to MPO (w/o pins)/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. | 1 : $86.45 5 : $84.72 10 : $82.99 25 : $81.26
|
| 0
 |
PE3W17163
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-LLPX Coax. PE3W17163 is a TNC male to TNC male cable using LMR-400-LLPX coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17163 TNC male to TNC male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE7161-15
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.2:1, Attenuation: 15 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 15 dB Fixed Attenuator, SMA Male to SMA Female Brass Tri-Metal Body Rated to 1 Watt Up to 2 GHz. PE7161-15 is a fixed 15 dB attenuator from Pasternack. This 15dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7161-15 15 dB attenuator is rated for up to 2 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7161-15 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 15dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $74.89 25 : $71.15 50 : $67.4 100 : $64.41
|
| 0
 |
 Vyrian | V71602510000G
| Amphenol Corporation | Barrier Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | | 18,605
 |
XLR71634X1200
| Broadcom Limited | | | 8,694
 |
TMS2716-30JDL
| Texas Instruments | Memory IC, 2KX8, MOS, CDIP24 RoHS : Not Compliant | | 8,679
 |
V62/04716-01XE
 | Texas Instruments | Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO56 RoHS : Compliant | | 8,481
 |
XDRA716BGGCBD
| Texas Instruments | RISC Microcontroller | | 8,302
 |
XLR71634XLP1000
| Broadcom Limited | | | 7,397
 |
TMS2716-30JL
| Texas Instruments | Memory IC, 2KX8, MOS, CDIP24 RoHS : Not Compliant | | 7,348
 |
TMDS37716016FN
| Texas Instruments | | | 5,932
 |
2716716
| Phoenix Contact | Barrier Strip Terminal Block, 57A, 16mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | | 5,196
 |
TMDS37716A27FN
| Texas Instruments | | | 4,846
 |
XLR71622XL00
| Broadcom Limited | | | 4,759
 |
XLR71622XLP0800
| Broadcom Limited | | | 4,380
 |
TMS2716-20JL
| Texas Instruments | Memory IC, 2KX8, MOS, CDIP24 RoHS : Not Compliant | | 3,680
 |
XCVN3716-2LLEVSVB2197-ES9749
| AMD Xilinx | | | 3,625
 |
XCVN3716-1MSIVSVB2197
| AMD Xilinx | | | 1,800
 |
 Wuhan P&S | 71600-026LF
| Amphenol FCi | IDC Receptacle,Double row,26 P,2.54mm RoHS : Compliant | 1 : $1.4 100 : $1.36 500 : $1.33 1,000 : $1.3
|
| 1,080
 |