7201280ACNRMNFZCWC Price, Distributor, Stock

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. 10-32 Male Right Angle to Push-On SMP Female Flexible Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly 10-32 male right angle to push-on SMP female flexible cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male right angle to push-on SMP female flexible cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to SMP cable assembly orders will ship same day as well. Pasternack RF coax flexible cable assembly is built with right angle 10-32 cable connection on one end and SMP cable connection on the other. Our flexible right angle 10-32 to SMP cable assemblies have a male gender on end 1 and female on end 2. This 10-32 to SMP cable is a male to female coax assembly, PE3C7720-12, can also be known as a flexible right angle 10-32 plug to SMP jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to SMP jack cable assembly PE3C7720-12 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 10-32 right angle male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7720-12 can also be used in the other direction and will be SMP female to right angle 10-32 male cable assembly if the opposite connectivity is required. Flexible 10-32 right angle plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMP cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male right angle to push-on SMP female flexible cable 12 inch length using RG178 coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3C7720-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 10-32 Male Right Angle to Push-On SMP Female Flexible Cable 150 CM Length Using RG178 Coax., Radio frequency assembly 10-32 male right angle to push-on SMP female flexible cable 150 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male right angle to push-on SMP female flexible cable 150 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to SMP cable assembly orders will ship same day as well. Pasternack RF coax flexible cable assembly is built with right angle 10-32 cable connection on one end and SMP cable connection on the other. Our flexible right angle 10-32 to SMP cable assemblies have a male gender on end 1 and female on end 2. This 10-32 to SMP cable is a male to female coax assembly, PE3C7720-150CM, can also be known as a flexible right angle 10-32 plug to SMP jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to SMP jack cable assembly PE3C7720-150CM is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 10-32 right angle male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7720-150CM can also be used in the other direction and will be SMP female to right angle 10-32 male cable assembly if the opposite connectivity is required. Flexible 10-32 right angle plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMP cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male right angle to push-on SMP female flexible cable 150 cm length using RG178 coax.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

PE3C9720-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female to Mini SMP Male VITA 67 Cable 12 Inch Length Using PE-P047HF Coax with HeatShrink., Radio frequency assembly mini SMP female to mini SMP male VITA 67 cable 12 inch length using PE-P047HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to mini SMP male VITA 67 cable 12 inch length using PE-P047HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to mini SMP cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and mini SMP cable connection on the other. Our vita 67 mini SMP to mini SMP cable assemblies have a female gender on end 1 and male on end 2. PE3C9720-12 can also be known as a vita 67 mini SMP jack to mini SMP plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to mini SMP plug cable assembly PE3C9720-12 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to mini SMP cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP female to mini SMP male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9720-12 can also be used in the other direction and will be mini SMP male to mini SMP female cable assembly if the opposite connectivity is required. Vita 67 mini SMP jack to mini SMP plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to mini SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to mini SMP male VITA 67 cable 12 inch length using PE-P047HF coax with heatshrink.

1 : $395.99
25 : $376.19
50 : $356.39
100 : $340.55

PE7201-30

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 30 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-30 30 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,210.0
5 : $1,161.6
10 : $1,113.2

PE7201-3

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 3 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 3 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-3 is a fixed 3 dB attenuator from Pasternack. This 3dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-3 3 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-3 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 3dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $989.99
5 : $950.39
10 : $910.79

PE7201-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-10 10 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,040.0
5 : $998.4
10 : $956.8

PE7201-60

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 60 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 60 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-60 is a fixed 60 dB attenuator from Pasternack. This 60dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-60 60 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-60 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 60dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,060.0
5 : $1,017.6
10 : $975.2

PE3W07201

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to SMA Female Cable Using PE-SR405FL Coax. PE3W07201 is a reverse polarity SMA male to SMA female cable using PE-SR405FL coax. This Pasternack reverse polarity SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to female SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W07201 SMA reverse polarity male to SMA female cable assembly is constructed with PE-SR405FL coax.

PE7201-50

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 50 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 50 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-50 is a fixed 50 dB attenuator from Pasternack. This 50dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-50 50 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-50 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 50dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,050.0
5 : $1,008.0
10 : $966.0

PE3W17201

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Female Cable Using RG174 Coax. PE3W17201 is a MMCX jack to SMA female cable using RG174 coax. This Pasternack MMCX jack to SMA female cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our jack MMCX to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17201 MMCX jack to SMA female cable assembly is constructed with RG174 coax.

PE3W17720-180

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Female Low Loss Cable 180 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N male right angle to N female low loss cable 180 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female low loss cable 180 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17720-180 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17720-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W17720-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17720-180 can also be used in the other direction and will be a type N female to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $320.99
10 : $308.15
25 : $295.31
100 : $282.47

PE33720-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Cable 12 Inch Length Using RG8X Coax., Radio frequency assembly N male to N male cable 12 inch length using RG8X coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 12 inch length using RG8X coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE33720-12, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE33720-12 is built with RG8X which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using RG8X coax.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PE3W17720-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Female Low Loss Cable 12 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N male right angle to N female low loss cable 12 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female low loss cable 12 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17720-12 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17720-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W17720-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17720-12 can also be used in the other direction and will be a type N female to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $252.99
10 : $242.87
25 : $232.75
100 : $222.63

PE3C7201

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm.

PE3FCA720-1M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: MPO (w/o pins), Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. MPO/UPC Male (pins) to MPO/UPC Female (w/o pins), 16 Fiber, Type B, Multimode OM4, LSZH Jacket-1M. Pasternack’s PE3FCA720-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with MPO (w/ pins)/UPC key up to MPO (w/o pins)/UPC key up connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA720-1M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as 400G and 800G parallel optics interconnects in hyperscale data centers, high-density spine-leaf network backbone cabling applications, direct connectivity between MPO transceivers and patching infrastructure, trunk cabling for cassette-based fiber distribution systems, switch-to-switch and core network aggregation links and future-ready fiber deployments supporting next-generation optical migration. With the flexibility of custom lengths, the PE3FCA720-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 16-strand fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA720-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to MPO (w/o pins)/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $89.85
5 : $88.05
10 : $86.26
25 : $84.46

TE Connectivity

170720-1

TE Connectivity

SOLIS RING UL.JIS.CSA(22-18) Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 18 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M3 Closed Ring Tongue Terminal 22 – 18 AWG .3 – 1.42 mm² 509 – 3260 CMA | Ring Terminal | Part Number: 170720-1 | Internal Number: 170720-1 | TE Connectivity
RoHS : Compliant

25,000 : $0.39
10,000 : $0.39
5,000 : $0.4
2,500 : $0.41
1,000 : $0.42
500 : $0.43
250 : $0.43
100 : $0.44
50 : $0.45
25 : $0.46
10 : $0.46
1 : $0.47

18,606

350720-1

TE Connectivity

09P UMNL PLUG HSG Number of Positions: 9 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Wire-to-Wire Standard Rectangular Connector | 9 Plug Housing Crimp | Part Number: 350720-1 | Internal Number: 350720-1 | Alias Number: 403049182 | TE Connectivity
RoHS : Compliant

1,000 : $0.48
100 : $0.65
10 : $0.8
1 : $1.01

4,300

1903720-1

TE Connectivity

PDL 3.96MM PITCH CAP HSG 12P(F Number of Positions: 12 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 12 Cap Housing Crimp | Part Number: 1903720-1 | Internal Number: 1903720-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.46
100 : $0.62
10 : $0.76
1 : $0.96

2,519

T4072014031-001

TE Connectivity

M8.MLE.PNLFRONT.3POS.STR WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 3 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Plug 3 12.6 | M8 Panel Mount Wire | Part Number: T4072014031-001 | Internal Number: T4072014031-001 | TE Connectivity
RoHS : Compliant

250 : $23.5
100 : $24.43
50 : $25.37
25 : $26.31
10 : $27.26
1 : $28.19

279

T2111027201-001

TE Connectivity

HMN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 2 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 2 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-001 | Internal Number: T2111027201-001 | TE Connectivity
RoHS : Compliant

50 : $4.61
25 : $4.88
10 : $5.15
1 : $5.43

175

T2111027201-702

TE Connectivity

HMN-Q3-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 8 Wire Size: 28 – 20 AWG Contact Current Rating (Max): 5 A Socket Insert for Contacts 8 28 – 20 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-702 | Internal Number: T2111027201-702 | TE Connectivity
RoHS : Compliant

50 : $28.14
25 : $29.8
10 : $31.45
1 : $33.11

T4072014041-001

TE Connectivity

M8.MLE.PNLFRONT.4POS.STR WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 12.6 | M8 Panel Mount Wire | Part Number: T4072014041-001 | Internal Number: T4072014041-001 | TE Connectivity
RoHS : Compliant

250 : $26.44
100 : $27.5
50 : $28.56
25 : $29.62
10 : $30.67
1 : $31.73

T2111027201-007

TE Connectivity

HMN-Q1-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 1 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 1 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-007 | Internal Number: T2111027201-007 | TE Connectivity
RoHS : Compliant

50 : $14.76
25 : $15.63
10 : $16.49
1 : $17.36

T2111027201-701

TE Connectivity

HMN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 4 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 4 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-701 | Internal Number: T2111027201-701 | TE Connectivity
RoHS : Compliant

50 : $28.14
25 : $29.8
10 : $31.45
1 : $33.11