 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
7469L-S16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | RT0805BRD0746K4L | YAGEO Corporation | Resistor: thin film; 46.4kΩ; 0805; 130mW; ±0.1%; RT; 2x0.5mm RoHS : Compliant |
| 40,000 | |
| 1-1746741-3 | TE Connectivity | Connector: wire-board; socket; female; data; Inom: 3A; PIN: 3; 2.01mm RoHS : Compliant |
| 1,564 | ||
| 1746189 | Bossard Group | Screw; M3; M3x50; 0.5; Head: cheese head; hex key; HEX 2.5mm |
| 1,100 | ||
| 2364574-6 | TE Connectivity | Switch: vandal resistant; IP67; ON-(ON),ON-ON; Illumin: LED; steel RoHS : Compliant |
| 90 | ||
| 1047464 | Phoenix Contact | Splice terminal: rail; 17.5A; 500V; push-in; PA; 0.14÷2.5mm2 RoHS : Compliant |
| 20 | ||
| 746 | Keystone Electronics Corp | Grommet; Ømount.hole: 17.45mm; Øhole: 11.1mm; rubber; black |
| 0 | ||
| 1674675 | Phoenix Contact | EMobility: cable; 1x16mm2,2x0.75mm2,2x35mm2,6x0.5mm2; 1kVDC |
| 0 | ||
| 1767465 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON M RoHS : Compliant |
| 0 | ||
| 1774670000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 16A; 400V; screw-in; screw; wemid; L: 46.5mm RoHS : Compliant |
| 0 | ||
| 1568241746 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: ET; 1.3÷3mm; PVC; yellow; leaded; CLI C; reel RoHS : Compliant |
| 0 | ||
| 1147463 | Bossard Group | Screw; M6; M6x12; 1; Head: countersunk; slotted; 1.6mm; steel; zinc |
| 0 | ||
| 09067460 | GSR | Tap: metric; M35; fine thread,right hand thread; 1.5; L: 170mm |
| 0 | ||
| 1-1623746-2 | TE Connectivity | Resistor: wire-wound; 1.5kΩ; THT; 3W; ±5%; Ø6x13.5mm; axial; Ø: 6mm RoHS : Compliant |
| 0 | ||
| MS27466T11B98PA | Amphenol Corporation | Connector: military; socket; male; military; PIN: 6; straight; olive RoHS : Not Compliant |
| 0 | ||
| MS27466T11F35SC | Amphenol Corporation | Connector: military; socket; female; military; PIN: 13; straight RoHS : Compliant |
| 0 | ||
 Avnet Americas | 1N4746ATR | onsemi | - Tape and Reel (Alt: 1N4746ATR) RoHS : Compliant |
| 90,000 | |
| 52746-1671 | Molex | FFC / FPC Board Connector, 16 Contacts, 1 Row, 0.5mm, Bottom, Gold, SMT, Right Angle, 0.3mm, Solder - Tape and Reel (Alt: 0527461671) RoHS : Compliant |
| 13,000 | ||
PN7462AUHN/C300Y | NXP Semiconductors | - Tape and Reel (Alt: PN7462AUHN/C300Y) RoHS : Compliant |
| 1,000 | ||
| 2-746610-1 | TE Connectivity | - Rail/Tube (Alt: 2-746610-1) RoHS : Compliant |
| 371 | ||
| 746610-9 | TE Connectivity | - Rail/Tube (Alt: 746610-9) RoHS : Not Compliant |
| 362 | ||
| MS27467T17B35S | Amphenol Corporation | - Bulk (Alt: MS27467T17B35S) RoHS : Not Compliant |
| 175 | ||
| MS27467T11F35S | Amphenol Corporation | - Bulk (Alt: MS27467T11F35S) RoHS : Not Compliant |
| 100 | ||
| MS27467T13B35P | Amphenol Corporation | - Bulk (Alt: MS27467T13B35P) RoHS : Not Compliant |
| 47 | ||
| MS27468T11B35SA | Conesys | - Bulk (Alt: MS27468T11B35SA) RoHS : Not Compliant | 12 | |||
| 746610-1 | TE Connectivity | - Rail/Tube (Alt: 746610-1) RoHS : Not Compliant |
| 12 | ||
| 5747461-3 | TE Connectivity | - Bag (Alt: 5747461-3) RoHS : Compliant |
| 6 | ||
| MS27467T15B97S | Conesys | - Bulk (Alt: MS27467T15B97S) RoHS : Not Compliant | 3 | |||
| 1-746610-5 | TE Connectivity | - Rail/Tube (Alt: 1-746610-5) RoHS : Compliant |
| 3 | ||
| MS27467T13B4S | Conesys | - Bulk (Alt: MS27467T13B4S) RoHS : Not Compliant | 2 | |||
| MS27467T17B6S | Conesys | - Bulk (Alt: MS27467T17B6S) RoHS : Not Compliant | 1 | |||
 Newark | 7461147 | Wurth Elektronik | Bushing, M5, Full 16Pin; |Würth Elektronik 7461147 RoHS : Compliant |
| 5,991 | |
| 35746-0110 | Molex | Contact, Socket, 20Awg, Crimp; |Molex 35746-0110 (Alternate Part Number: 800753856417 RoHS : Compliant |
| 3,950 | ||
| 35746-0110 | Molex | Contact, Socket, 20Awg, Crimp; |Molex 35746-0110 (Alternate Part Number: 800753856417 RoHS : Compliant |
| 3,950 | ||
TLE7469GV52AUMA1 | Infineon Technologies AG | Ic, Ldo Reg 5/2.6V, 250/200Ma, Dso12; |Infineon Technologies TLE7469GV52AUMA1 RoHS : Compliant |
| 386 | ||
| ZW-09-20-L-S-746-134 | Samtec Inc | Conn Stack Brd, 2.54Mm, 9Pos, Hdr; |Samtec, Inc. ZW-09-20-L-S-746-134 RoHS : Compliant |
| 200 | ||
| MS27466T9F35P | Amphenol Aerospace | Cir Conn, Mil-Dtl-38999 Series Ii; |Amphenol Aerospace MS27466T9F35P RoHS : Not Compliant |
| 100 | ||
| 3-107-465 | Schurter Electronic Components | Power Line Filter, Standard, 1A, Qc; |Schurter 3-107-465 RoHS : Compliant |
| 80 | ||
| 33511746 | Aptiv PLC | Automotive Contact, Pin, Crimp; |Aptiv/delphi 33511746 RoHS : Compliant |
| 61 | ||
| 746600135R | Wurth Elektronik | Spacer, Swage Round, Redcube, 5.6Mm; |Würth Elektronik 746600135R RoHS : Compliant |
| 57 | ||
| PP002746 | SPC Multicomp | Heat-Shrink Tubing, 2:1, Yellow, 2.5Mm; |Multicomp Pro PP002746 RoHS : Compliant |
| 23 | ||
| 05057460001 | Wera | Bit Assortment, 52 Pc; |Wera 05057460001 (Alternate Part Number: 4013288179968 RoHS : Not Compliant |
| 9 | ||
| 746 | Adafruit Industries | Breakout Board, Ultimate Gps; |Adafruit 746 RoHS : Compliant |
| 7 | ||
| 746 | Wilcoxon Sensing Technologies | |Amphenol Wilcoxon 746 RoHS : Not Compliant |
| 0 | ||
| 746 | TE Connectivity | Amp Extract Tool Type 2 20-; |Te Connectivity Amp 746 RoHS : Not Compliant |
| 0 | ||
| 746 | Keystone Electronics Corp | Grommet; |Keystone 746 RoHS : Compliant |
| 0 | ||
 RS | N3793-5302RB (51111627464) | 3M | CONN RECT HEADER 4-WALL 0.100IN 10PIN SOLDER TAIL 0.062IN PCB HIGH TEMP |
| 279 | |
| 2474606-1 | TE Connectivity | PUSH BUTTON, STAINLESS, HIGH BUTTON, WHITE LED RING, SOLDER TERMINAL, LED 12VDC |
| 70 | ||
| 1SNA178746R1500 (017874615) | TE Connectivity | CBM8, ENTRELEC |
| 32 | ||
| 17746 10 B1 | Volex Group | CORD, POWER, C13, RIGHT ANGLE, 5-15P PLUG, 3 COND SVT CBL, 910", 18 AWG, SHLD |
| 5 | ||
| 2451746 (25531207) (MPFI0-500500-100RS) | RS Pro | SCREW, #5-40 X 1/2 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 5 | ||
| 7ML57461QA021BA0 (7ML5746-1QA02-1BA0) | Siemens Process Instrumentation | SITRANS LVL200 VIBRATING POINT LEVEL SWITCH, STANDARD DESIGN |
| 4 | ||
| 1947468 | RS Pro | PUSH BUTTON MOUNTING BRACKET FOR 1 HOLE 22MM DIAMETER ENCLOSURES |
| 3 | ||
| XT1SU3050AFF000XXX (1SDA074671R1) | ABB Low Voltage Products and Systems | XT1 125A FRAME 3P THERMAL/MAGNETIC FIXED 35K -480V W/O LUGS 50 AMP |
| 3 | ||
| XT1NU3060AFF000XXX (1SDA074642R1) | ABB Low Voltage Products and Systems | TMAX BREAKER FRAME SIZE XT1N 125, TMF 60-600 3P F F UL/CSA |
| 2 | ||
| XT1SU3040AFF000XXX (1SDA074669R1) | ABB Low Voltage Products and Systems | XT1 125A FRAME 3P THERMAL/MAGNETIC FIXED 35K -480V W/O LUGS 40 AMP |
| 2 | ||
| BI2-EG08K-AP6X-V1131/S957 (4669452) | TURCK Inc | PROXIMITY SENSOR, M8 INDUCTIVE, 2MM RANGE, 3 WIRE, PNP, 10-30VDC, M8, S4669452 |
| 2 | ||
| M7-173-593 (174696) | Brady Worldwide Inc | RAISED PANEL LABELS 2 IN H X 1 IN W WT RL/100 M710 |
| 1 | ||
| POS3374643SA (PER.POS3374643SA) | PEER Bearing Company | PEER OIL BATH SEALS (OB) |
| 1 | ||
| 746 | Wilcoxon Sensing Technologies | SENSOR, TOP EXIT, TITANIUM CASE, MINIATURE, UNDERWATER RATED DOWN TO 650 PSI, |
| 0 | ||
| 746 | SCS | ANTI-STATIC, CONTROL PRODUCTS, , AC STRAP TESTER |
| 0 | ||
 STMicroelectronics | STM32F746ZGY6TR | STMicroelectronics | High-performance and DSP with FPU Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 4,365 | |
| STM32F746G-DISCO | STMicroelectronics | Discovery kit with STM32F746NG MCU |
| 731 | ||
| STM32F746BGT6 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 332 | ||
| STM32F746IET6 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 328 | ||
| STM32F746IGT7 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 297 | ||
| STM32F746NEH6 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 109 | ||
| STM32F746VET6 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, TFT RoHS : Compliant |
| 33 | ||
| STM32F746ZGT7 | STMicroelectronics | High-performance and DSP with FPU Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 33 | ||
| STM32F746ZGT6 | STMicroelectronics | High-performance and DSP with FPU Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 12 | ||
| STM32F746ZET6 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 10 | ||
| STM32F746BGT7 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 0 | ||
| STM32F746ZET6TR | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 0 | ||
| STM32F746NGH7 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 0 | ||
| STM32F746VGT7 | STMicroelectronics | High-performance and DSP with FPU, Arm Cortex-M7 MCU with 1 Mbyte of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM, TFT RoHS : Compliant |
| 0 | ||
TDA7468D13TR | STMicroelectronics | Tone controlAudio processor with bass ALC RoHS : Compliant |
| 0 | ||
 Rochester Electronics | PN7462AUEV/C300E | NXP Semiconductors | NFC/RFID Tag and Transponder ICs RFID Reader/Transponder 13.56MHz 64-BGA Tray RoHS : Compliant |
| 490 | |
| SPC5746CFK1ACKU6 | NXP Semiconductors | MPC5746C - 32 Bit, DUAL CORE, 3M FLASH, 512K RAM, HSM, CAN FD RoHS : Compliant |
| 1,600 | ||
| SPC5746BK1AMKU6 | NXP Semiconductors | IC MCU e200z4 32Bit 1 Core FLASH 3MB (3M x 8) 160MHz 176-QFP RoHS : Compliant |
| 110 | ||
SPC5746CSK1MMH6 | NXP Semiconductors | IC MCU e200z2, e200z4 32Bit 3 Core FLASH 3MB (3M x 8) 80MHz, 160MHz 100-BGA Tray RoHS : Compliant |
| 939 | ||
| NCV7462DQ0R2G | onsemi | IC INTERFACE Transceiver LIN 20kBaud 5V - 28V 36-SOP T/R RoHS : Compliant |
| 14,904 | ||
| 1N4746A-T50A | onsemi | Zener Diode Single 18V 1W DO41 Fan-Fold RoHS : Compliant |
| 165,000 | ||
ADT7463ARQZ-REEL | onsemi | Thermal Power Management Fan Control, Temp Monitor SMBus 24-SOP T/R RoHS : Compliant |
| 8,773 | ||
| LV8746V-MPB-E | onsemi | Motor Driver ICs Driver - Fully Integrated, Control and Power Stage 1A 44-SOP Fan-Fold RoHS : Compliant |
| 1,250 | ||
| IRF7469TRPBF-1 | Infineon Technologies AG | MOSFET N-Channel 40V 9A (Ta) 8-SOIC T/R RoHS : Compliant |
| 4,000 | ||
| TLE7469GV52AUMA1 | Infineon Technologies AG | IC VOLT REG Fixed 2 REG 2.6V, 5V 200mA, 215mA 12-SOP T/R RoHS : Compliant |
| 970 | ||
AD7467BRTZ-R2 | Analog Devices Inc | IC ADC 1 CONV 10Bits SAR DSP, MICROWIRE, QSPI, SPI SOT-23-6 T/R RoHS : Compliant |
| 19,078 | ||
| BCM20746A0KFBGT | Broadcom Limited | IOT BLUETOOTH 802.15.4 RoHS : Not Compliant |
| 18,000 | ||
MAX3746HETE | Maxim Integrated Products | MAX3746 Low-Power, 622 MBPS To 3.2 Giga Bits Per Second Limiting Amplifier RoHS : Not Compliant |
| 3,127 | ||
MAX7463USA+T | Maxim Integrated Products | Continuous Time Filter, 1 Func, Butterworth, Lowpass, BICMOS, PDSO8 RoHS : Compliant |
| 4,780 | ||
MAX746ESE | Maxim Integrated Products | Switching Controller, Current-mode, 3A, CMOS, PDSO16 RoHS : Not Compliant |
| 29 | ||
 Sager | 746 | Keystone Electronics Corp | Grommets & Bushings RUBBER GROMMET .687 |
| 0 | |
| 20007464-00 | TE Connectivity | TE Connectivity 52M30-2000-001-03 |
| 0 | ||
| 2176746-4 | TE Connectivity | BMC-Q 0402 9R0 5~13R TOL. UH CURRENT RoHS : Compliant |
| 0 | ||
| 1731090746 | Molex | D-Sub Standard Connectors FCT LOPRO STR PC RCPT 09 PN W/SNAPIN RoHS : Compliant | 0 | |||
| 1767465 | Phoenix Contact | Pluggable Terminal Blocks 11 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| 1803074-6 | TE Connectivity | Crimpers / Crimping Tools ANVILCOMBINATION END FEED RoHS : Compliant |
| 0 | ||
| 180D7462 | Eaton Bussmann | FUSE 800A 1500VDC IEC aR 4BKN/155 | 0 | |||
| 1511174620 | Molex | MGRID SHRD HDR TH /OPEG .38AULF 20CKT RoHS : Compliant |
| 0 | ||
| 1327466/94H/20 | Phoenix Contact | Ethernet Cables / Networking Cables | 0 | |||
| 2364574-6 | TE Connectivity | Pushbutton Switches AVH19 FLT SS LK PWR RED 12V16A RoHS : Compliant |
| 0 | ||
| 11107463-00 | TE Connectivity | AST4400C00350B4P0000-SS:CTO-13000000-03 |
| 0 | ||
| 1047464 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX 4/18X1 5-NS35 PK RoHS : Compliant |
| 0 | ||
| 1-1474612-2 | TE Connectivity | FFC / FPC Jumper Cables FSK-23Z-24 RoHS : Compliant |
| 0 | ||
| 1-1746741-3 | TE Connectivity | Power to the Board RITS CONN.SOCKET ASSY 3P RED RoHS : Compliant |
| 0 | ||
| 1-2176674-6 | TE Connectivity | MELF SMA-Q 3K83 1% 50PPM 0207 1W RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | BQ27Z746YAHR | Texas Instruments | RoHS : Compliant | 120,000 | ||
| SZESD7462N2T5G | onsemi | Ultra-Low Capacitance ESD Protection RoHS : Compliant | 7,416 | |||
| SC667467K0AVKU6R | NXP Semiconductors | 1,446 | ||||
BU7462SNUX-TR | ROHM Semiconductor | High Speed Ground Sense Operational Amplifier RoHS : Compliant |
| 400 | ||
| SPC5746BHK1AMKU6 | NXP Semiconductors | IC MCU 32BIT 3MB FLASH 176LQFP RoHS : Compliant | 349 | |||
TPS74601PBDRVT | Texas Instruments | RoHS : Compliant | 346 | |||
| BU7462F-E2 | ROHM Semiconductor | RoHS : Compliant |
| 200 | ||
| TLE7469GV52 | Infineon Technologies AG | IC 5/2.5 DUAL REG TLE7469GV52 RoHS : Compliant | 176 | |||
| M7567-46 | STMicroelectronics | 104 | ||||
| BU7462FVM-TR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BU7462SF-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU7465SHFV-TR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU7461G-TR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD4746G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| ADT7461ARMZ | onsemi | SENSOR TEMPERATURE SMBUS MICRO8 RoHS : Compliant | 34 | |||
 ComSIT USA | LM74670QDGKRQ1 | AVAILABLE EU | 362 | |||
| ASY0746301 | INTERPLEX PRECISION - HA NOI | AVAILABLE EU | 18,621 | |||
| 31746 | INDUGU | AVAILABLE EU | 38 | |||
| ASY0746203 | INTERPLEX PRECISION - HA NOI | AVAILABLE EU | 14,637 | |||
| 527461633 | AVAILABLE EU | 836 | ||||
| K95746 | Wurth Elektronik | AVAILABLE EU | 13,926 | |||
ComSIT USA | PN7462AUHNC300 | NXP Semiconductors | NFC-MCU, 32BIT, ARM CORTEX-M0, HVQFN-64 RoHS : Compliant | 49,000 | ||
| 527461870 | Molex | EMBSTP PKG, 0.5 FPC CONN. Z.I.F. FOR SMT. R/A (BOTTOM CONTACT), EMBSTP PKG FFC/FPC Connector, 18 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking RoHS : Compliant | 9,000 | |||
| 1N4746ARL | Motorola Semiconductor Products | 1 WATT DO-41 HERMETICALLY SEALED GLASS ZENER VOLTAGE REGULATOR Zener Diode, 18V V(Z), 5%, 1W, Silicon, Unidirectional, DO-41 RoHS : Not Compliant | 3,560 | |||
| PA2746NLT | Pulse Electronics Corporation | Data Line Filter, 2 Function(s), 6A, 4 Pin(s) RoHS : Compliant | 3,500 | |||
| SI7465DPT1E3 | Vishay Intertechnologies | P-CHANNEL 60-V (D-S) MOSFET Power Field-Effect Transistor, 3.2A I(D), 60V, 0.064ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 1,150 | |||
| 1707460000 | Weidmüller Interface GmbH & Co. KG | PCB PLUG-IN FEMALE CONNECTOR Strip Terminal Block, 17A, 3.31mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 1,140 | |||
| 1923746 | Phoenix Contact | PCB HEADERS, NOMINAL CROSS SECTION: 15 MM SQUARE Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 800 | |||
ADT7461ARMZ | Analog Devices Inc | PLUS OR MINUS 1 DEGREE CENTIGRADE TEMPERATURE MONITOR WITH SERIES RESISTANCE CANCELLATION Serial Switch/Digital Sensor, 8 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant | 603 | |||
| IRF7465TRPBF | International Rectifier | Small Signal Field-Effect Transistor, 1.9A I(D), 150V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MS-012AA RoHS : Compliant | 540 | |||
MAX746CPE | Maxim Integrated Products | HIGH-EFFICIENCY, PWM, STEP-DOWN, N-CHANNEL DC-DC CONTROLLER Switching Controller, Current-mode, 3A, CMOS, PDIP16 RoHS : Not Compliant | 432 | |||
| 1746552 | TE Connectivity | ECONOSEAL J SERIES CONNECTOR Combination Line Connector, 10 Contact(s), Female, Crimp Terminal, Plug RoHS : Not Compliant | 423 | |||
| 2746744 | Phoenix Contact | Electronic Component RoHS : Compliant | 212 | |||
| TLE7469GV52AUMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 2 Output, 5V1, 2.6V2, PDSO12 RoHS : Compliant | 155 | |||
2746087 | Phoenix Contact | Electronic Component RoHS : Compliant | 79 | |||
| 2746980 | Phoenix Contact | Electronic Component RoHS : Compliant | 25 | |||
 Interstate Connecting Components | 35746-0110 | Molex | AE-35746-0110 357460110 RoHS : Compliant |
| 51,250 | |
| 746 | Keystone Electronics Corp |
| 825 | |||
| 20007464-00 | TE Connectivity | 52M30-2000-001-03 | 0 | |||
| 2176746-4 | TE Connectivity | BMC-Q 0402 9R0 5~13R TOL. UH C RoHS : Compliant | 0 | |||
| 1746976-1 | TE Connectivity | GRACE INERTIA CONNECTOR 6.2MM RoHS : Compliant | 0 | |||
| 1803074-6 | TE Connectivity | ANVIL,COMBINATION, END FEED RoHS : Compliant |
| 0 | ||
| 143-1746-000 | ITT Interconnect Solutions | INSUL ASSY KJLC13-8S | 0 | |||
| 2364574-6 | TE Connectivity | AVH19 FLT SS LK PWR RED 12V16A RoHS : Compliant |
| 0 | ||
| 11107463-00 | TE Connectivity | AST4400C00350B4P0000-SS:CTO-13 | 0 | |||
| 1-1474612-2 | TE Connectivity | FSK-23Z-24 RoHS : Compliant |
| 0 | ||
| 1-1623746-2 | TE Connectivity | ER74 1K5 5% AMMO PK RoHS : Compliant |
| 0 | ||
| 1-1746741-3 | TE Connectivity | RITS CONN.SOCKET ASSY 3P RED RoHS : Compliant |
| 0 | ||
| 1-2176674-6 | TE Connectivity | MELF SMA-Q 3K83 1% 50PPM 0207 RoHS : Compliant | 0 | |||
| 3-174637-5 | TE Connectivity | 1.25FP,R04,SL,B,N,BG RoHS : Compliant |
| 0 | ||
| 5-1879746-5 | TE Connectivity | RP 1J 21K5 0.1% 15PPM CUT LENG RoHS : Compliant |
| 0 | ||
 PEI Genesis | 10-474614-05P | Amphenol Corporation |
| 635 | ||
| 75-474612-03S | Amphenol Corporation |
| 295 | |||
| S7-4628-C | SOURIAU-SUNBANK |
| 0 | |||
| 75-474628-15S | Amphenol Corporation |
| 0 | |||
| MS27466E11B99S | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| MS27466E17F35S | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| MS27466T11B13P | Amphenol Corporation |
| 0 | |||
| MS27466T11B4P-LC | Aero-Electric Connector Inc |
| 0 | |||
| MS27466T11B98PA | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| MS27466T11B98PA | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| MS27466T11B98PA | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| MS27466T11F2P | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| MS27466T11F35SC | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | ||
| MS27466T11Z98SD | SOURIAU-SUNBANK |
| 0 | |||
| MS27466T13B4P | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 12.87746 | 24,347 | ||||
| 12.97469 | 1,000 | |||||
| 12.97461 | 650 | |||||
| 12.97468 | 155 | |||||
| 17461 10 S2 | 120 | |||||
| 2015-2X06G00D-7.4-6.2-0.8 | 41 | |||||
 Chip 1 Exchange | 35746-0510 | Molex | INSTOCK | 1,209,780 | ||
| 35746-0110 | Molex | INSTOCK RoHS : Compliant | 478,500 | |||
| 1746872-1 | TE Connectivity | INSTOCK RoHS : Compliant | 77,844 | |||
| 1-963746-1 | TE Connectivity | INSTOCK RoHS : Compliant | 66,238 | |||
| 1SMA4746A-HT | INSTOCK | 18,649 | ||||
| 1746872-2 | TE Connectivity | INSTOCK RoHS : Compliant | 16,640 | |||
| MAX6746KA26+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 10,955 | |||
| 5746613-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,129 | |||
| 1-1746741-3 | TE Connectivity | INSTOCK RoHS : Compliant | 2,093 | |||
| 747460-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,907 | |||
SI7463DP-T1-E3 | Vishay Siliconix | INSTOCK RoHS : Compliant | 1,820 | |||
| 1746741-6 | TE Connectivity | INSTOCK RoHS : Compliant | 1,544 | |||
| 236-746/334-000 | WAGO Innovative Connections | INSTOCK | 560 | |||
| MAX6746KA26+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 280 | |||
| 7461066 | Wurth Elektronik | INSTOCK RoHS : Compliant | 154 | |||
 Avnet Abacus | 527461071 | Molex | Conn FFCFPC Socket 10 POS 05mm Solder Right Angle Surface Mount - Tape and Reel (Alt: 527461071) RoHS : Compliant | 79,000 | ||
| 527462071 | Molex | FFC FPC Board Connector ZIF 05 mm 20 Contacts Receptacle Surface Mount Bottom - Tape and Reel (Alt: 527462071) RoHS : Compliant | 64,000 | |||
| RC0402FR-0746R4L | YAGEO Corporation | SMD Chip Resistor 464 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-0746R4L) RoHS : Compliant | 60,000 | |||
| RC0603FR-07464KL | YAGEO Corporation | SMD Chip Resistor 464 kOhm 1 100 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0603FR-07464KL) RoHS : Compliant | 45,000 | |||
| 527461271 | Molex | - Tape and Reel (Alt: 527461271) RoHS : Compliant | 41,000 | |||
| 527460671 | Molex | FFCFPC Connector Socket 6 Position 05 mm Solder Right Angle Surface Mount Emboss TR - Tape and Reel (Alt: 527460671) RoHS : Compliant | 35,000 | |||
| B57464S109M | TDK Corporation | Inrush Current Controllers 2Pin (Alt: B57464S0109M000) RoHS : Compliant | 21,400 | |||
| 527460871 | Molex | Conn FFCFPC Socket 8 POS 05mm Solder RA SMD - Tape and Reel (Alt: 527460871) RoHS : Compliant | 19,000 | |||
| 2-746610-1 | TE Connectivity | Pin Header WiretoBoard 254 mm 2 Rows 10 Contacts Through Hole AMPLATCH Series (Alt: 2-746610-1) RoHS : Compliant | 6,500 | |||
| 1746679-1 | TE Connectivity | HDMI Connector 19 Contacts Jack PCB Mount Through Hole Right Angle Gold Plated Contacts (Alt: 1746679-1) RoHS : Compliant | 6,080 | |||
| DR74-680-R | Eaton Corporation | Power Inductor SMD 68 H 103 A Shielded 119 A DR Series - Tape and Reel (Alt: DR74-680-R) RoHS : Compliant | 3,300 | |||
| M7967-46 | Harwin | 254mm 01 Pitch Closed Top Jumper Socket with Handle multiusage 10mm high tin Black (Alt: M7967-46) RoHS : Compliant | 3,000 | |||
| B57464S100M | TDK Corporation | Thermistor ICL NTC 10 Ohm 27 mm 8 A B57464S0 (Alt: B57464S0100M000) RoHS : Compliant | 2,600 | |||
| DR74-6R8-R | Eaton Corporation | Power Inductor SMD 68 H 26 A Shielded 367 A DR Series - Tape and Reel (Alt: DR74-6R8-R) RoHS : Compliant | 1,100 | |||
| MS27468T23B35SA | Amphenol Corporation | Circular Connector MILDTL38999 Series I Jam Nut Receptacle 100 Contacts Crimp Socket Bayonet (Alt: MS27468T23B35SA) RoHS : Not Compliant | 25 | |||
Avnet Asia | 9-6474612-1 | TE Connectivity | Cable Ribbon 10Conductors 24AWG 0.051m 300V (Alt: 9-6474612-1) RoHS : Compliant | 5,000 | ||
| 10174690-1UF026LF | Amphenol Corporation | (Alt: 10174690-1UF026LF) RoHS : Compliant | 2,140 | |||
| RMC74-6746 | Amphenol Corporation | MCIO 8X RA TO RA W/O MYLAR L:400MM (Alt: RMC74-6746) RoHS : Compliant | 0 | |||
| RMC74-6780 | Amphenol Corporation | CABLE: MCIOX8 TO 2*MCIO X4 400MM (Alt: RMC74-6780) RoHS : Compliant | 0 | |||
| PA2746NLT | Pulse Electronics Corporation | (Alt: PA2746NLT) RoHS : Compliant | 0 | |||
| 1-2176746-5 | TE Connectivity | BMC-Q 0402 200R 25% Tol. UH Current (Alt: 1-2176746-5) RoHS : Compliant | 0 | |||
| 2-746610-1 | TE Connectivity | (Alt: 2-746610-1) RoHS : Compliant | 0 | |||
| 10174690-1UF028LF | Amphenol Corporation | (Alt: 10174690-1UF028LF) RoHS : Compliant | 0 | |||
| RMC74-6644 | Amphenol Corporation | CABLE: MCIOX8 TO MCIOX8 450MM (Alt: RMC74-6644) RoHS : Compliant | 0 | |||
| RMC74-6495 | Amphenol Corporation | CABLE: MCIOX8 TO MCIOX8 300MM (Alt: RMC74-6495) RoHS : Compliant | 0 | |||
| 2007464-2 | TE Connectivity | (Alt: 2007464-2) RoHS : Compliant | 0 | |||
| 10174690-1UF042LF | Amphenol Corporation | (Alt: 10174690-1UF042LF) RoHS : Compliant | 0 | |||
| 10174690-1UF123LF | Amphenol Corporation | FCI10174690-1UF123LF CBL, CLINK CABLE, A (Alt: 10174690-1UF123LF) RoHS : Compliant | 0 | |||
| 746X101153JP | CTS Corporation | (Alt: 746X101153JP) RoHS : Compliant | 0 | |||
| 1N4746A-T50A | onsemi | (Alt: 1N4746A-T50A) RoHS : Compliant | 0 | |||
 Avnet Silica | DL4746A_ R2 _10001 | PanJit Semiconductor | (Alt: DL4746A_R2_10001) RoHS : Compliant | 25,000 | ||
| 1N4746A | onsemi | Zener Single Diode 18 V 1 W DO41 DO204AL 2 Pins 200 C Through Hole (Alt: 1N4746A) RoHS : Compliant | 21,000 | |||
| MC56F82746VLFR | NXP Semiconductors | MCU 32Bit MPC56xx 56800 EX 64KB Flash 33V 48Pin LQFP TR (Alt: MC56F82746VLFR) RoHS : Compliant | 6,000 | |||
| STM32F746IGT6 | STMicroelectronics | ARM MCU 32bit ARM CortexM7 216 MHz 1 MB 320 KB 176 Pins LQFP (Alt: STM32F746IGT6) RoHS : Compliant | 1,480 | |||
| STM32F746BET6 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 512kB Flash 208Pin LQFP Tray (Alt: STM32F746BET6) RoHS : Compliant | 1,440 | |||
| STM32F746ZET6 | STMicroelectronics | ARM MCU 32bit ARM CortexM7 216 MHz 512 KB 320 KB 144 Pins LQFP (Alt: STM32F746ZET6) RoHS : Compliant | 120 | |||
| STM32F746IGT7 | STMicroelectronics | MCU 32Bit STM32 ARM Cortex M7 RISC 1MB Flash 18V25V33V 176Pin LQFP Tray (Alt: STM32F746IGT7) RoHS : Compliant | 120 | |||
| STM32F746BGT6 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 1MB Flash 208Pin LQFP Tray (Alt: STM32F746BGT6) RoHS : Compliant | 108 | |||
| STM32F746NGH6U | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 1MB Flash 216Pin TFBGA Tray (Alt: STM32F746NGH6U) RoHS : Compliant | 0 | |||
| SPC5746BK1MKU2R | NXP Semiconductors | 32bit MCU e200z4 120 MHz 3 MB 384 KB 176 Pins LQFPEP (Alt: SPC5746BK1MKU2R) RoHS : Compliant | 0 | |||
| STM32F746ZEY6TR | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 512kB Flash 143Pin WLCSP TR (Alt: STM32F746ZEY6TR) RoHS : Compliant | 0 | |||
| JANTX1N746A-1/TR | Microchip Technology Inc | (Alt: JANTX1N746A-1/TR) RoHS : Compliant | 0 | |||
| PN7462AUEV/C300E | NXP Semiconductors | Microcontroller Application Specific PN7462 Series 12KB RAM VFBGA64 (Alt: PN7462AUEV/C300E) RoHS : Compliant | 0 | |||
| 1SMA4746_R2_00001 | PanJit Semiconductor | (Alt: 1SMA4746_R2_00001) RoHS : Compliant | 0 | |||
| 1N4746A-G_ R2 _10001 | PanJit Semiconductor | (Alt: 1N4746A-G_R2_10001) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AEACMK0660746-SG4 | Abracon Corporation | RF ANT 1561/1575/1602MHZ EXT RoHS : Compliant |
| 0 | |
 Component Electronics, Inc | RC0603FR-0746R4 | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,500 | |
| 2-746610-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 800 | ||
| 1-1374685-5 | TE Connectivity | IN STOCK SHIP TODAY | 700 | |||
| 3-1374685-3 | TE Connectivity | IN STOCK SHIP TODAY | 381 | |||
| 174681-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 258 | ||
| 1-390074-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 132 | ||
| M50746ESP | Mitsubishi Electric | IN STOCK SHIP TODAY |
| 81 | ||
ZM4746A | Diodes Incorporated | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
| 0467460000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 34 | ||
| 1-746286-2 | TE Connectivity | IN STOCK SHIP TODAY | 32 | |||
| 746290-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 23 | ||
| 507-3909-1474-600 | Dialight | IN STOCK SHIP TODAY |
| 20 | ||
| 746610-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| 024746SE20 | NOMA CABLE | IN STOCK SHIP TODAY |
| 4 | ||
| MS27467T13B4S | Matrix Connector | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 20029746 | Essentra Components | 0 | |||
| 20597467 | Essentra Components | 18X28 BSPGAS THRD PLUG FLAT WA | 0 | |||
| 497746 | Essentra Components | 0 | ||||
| 10228746 | Essentra Components | 0 | ||||
| 20834746 | Essentra Components | 0 | ||||
| 467467 | Essentra Components | 0 | ||||
| 7464-B-440-SS | RAF Electronic Hardware | FULL KNURLED SWAGE STANDOFF | 0 | |||
| GR67464122A | Essentra Components | GROMMETSEPDM GRAY | 0 | |||
| 157466 | Avdel | VITE M8 TE DOPPIO GAMBO RIVEC5 | 0 | |||
| 110746 | Essentra Components | 0 | ||||
| 467468 | Essentra Components | 0 | ||||
| 23025746 | Pop Rivets | DPN900-053 | 0 | |||
| 1220746 | Essentra Components | 0 | ||||
| 7460-B-632-B-5 | RAF Electronic Hardware | ADDITIONAL LOT CHARGE DEPENDS ON ORDER QTY | 0 | |||
| 4574-632-SS-20 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | SI7465DP-T1-E3 | Vishay Intertechnologies | (Alt: SI7465DP-T1-E3) RoHS : Compliant | 30,000 | ||
| 1N4746A-TR | Vishay Intertechnologies | (Alt: 1N4746A-TR) RoHS : Compliant | 10,000 | |||
| 1SMA4746 | Taiwan Semiconductor | Diode Zener Single 18V 5 1W 2Pin DO214AC TR (Alt: 1SMA4746) RoHS : Compliant | 7,500 | |||
| SI7469DP-T1-E3 | Vishay Intertechnologies | (Alt: SI7469DP-T1-E3) RoHS : Compliant | 6,000 | |||
ZM4746A-GS08 | Vishay Intertechnologies | (Alt: ZM4746A-GS08) RoHS : Compliant | 4,500 | |||
| CY8C4746LQS-S263 | Infineon Technologies AG | MCU 32Bit CY8C4746 ARM CortexM0 RISC 64KB Flash 171V to 55V 40Pin QFN Tray (Alt: SP005650575) RoHS : Compliant | 2,450 | |||
| MC56F82746VLF | NXP Semiconductors | Digital Signal Controller MC56F82xx 100 MHz 64 KB 39 IOs CAN I2C SPI SCI 1 V (Alt: MC56F82746VLF) RoHS : Compliant | 2,000 | |||
| STM32F746VGH6 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 1MB Flash 100Pin TFBGA Tray (Alt: STM32F746VGH6) RoHS : Compliant | 1,392 | |||
| STM32F746IGT7 | STMicroelectronics | MCU 32Bit STM32 ARM Cortex M7 RISC 1MB Flash 18V25V33V 176Pin LQFP Tray (Alt: STM32F746IGT7) RoHS : Compliant | 1,280 | |||
| STM32F746NGH7 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 1MB Flash 216Pin TFBGA Tray (Alt: STM32F746NGH7) RoHS : Compliant | 1,280 | |||
| SPC5746RK1MMT5 | NXP Semiconductors | Freescale 32bit MCU Dual Power Arch core 4MB Flash 200MHz 40125degC Automotive QualMAP 252 (Alt: SPC5746RK1MMT5) RoHS : Compliant | 810 | |||
| STM32F746IET6 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 512kB Flash 176Pin LQFP Tray (Alt: STM32F746IET6) RoHS : Compliant | 640 | |||
| SPC5746CHK1AMMJ6 | NXP Semiconductors | 32bit MCU e200z4 e200z2 160 MHz 3 MB 512 KB 256 Pins MAPBGA (Alt: SPC5746CHK1AMMJ6) RoHS : Compliant | 360 | |||
| F17465_DAISY-MINI-SHD-WHT-MATT | LEDIL | SHADERECTANG14 POS200 X 2800MM D (Alt: F17465_DAISY-MINI-SHD-WHT-MATT) RoHS : Compliant | 252 | |||
| STM32F746ZGT7 | STMicroelectronics | MCU 32Bit STM32F ARM CortexM7 RISC 1MB Flash 144Pin LQFP Tray (Alt: STM32F746ZGT7) RoHS : Compliant | 180 | |||
 Flip Electronics | NCV7462DQ0R2G | onsemi | Stock, Ship Today RoHS : Compliant | 31,500 | ||
| 1N4746A-T50A | onsemi | Stock, Ship Today RoHS : Compliant |
| 24,000 | ||
| ESD7461N2T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 19,726 | ||
| MC56F80746VLF | NXP Semiconductors | Stock RoHS : Compliant | 17,500 | |||
| MC56F80746MLF | NXP Semiconductors | Stock RoHS : Compliant | 12,500 | |||
| NCV7462DQ1R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
| MC56F81746VLF | NXP Semiconductors | Stock RoHS : Compliant | 4,500 | |||
| SPC5746CFK1ACKU6 | NXP Semiconductors | Stock | 4,400 | |||
| 1N4746ATR | onsemi | Stock, Ship Today RoHS : Compliant | 2,898 | |||
| SPC5746BBK1AMMH6 | NXP Semiconductors | Stock | 1,760 | |||
| SPC5746CSK1AMMJ6 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,341 | ||
| SPC5746CSK1MMH6 | NXP Semiconductors | Stock RoHS : Compliant | 880 | |||
| SPC5746CSK1AMKU6 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 241 | ||
| SPC5746BK1MKU2 | NXP Semiconductors | Stock, Ship Today |
| 162 | ||
| MPC5746R-144DS | NXP Semiconductors | Stock | 10 | |||
 Master Electronics | 10-474617-11P | Amphenol Industrial Operations | The 10-474617-11P is an environmental resisting (Class F) cylindrical straight plug connector with 5 size 12 pin contacts. RoHS : Not Compliant |
| 28 | |
| 10-474614-05P | Amphenol Industrial Operations | Conn Cylindrical Circular PIN 5 POS Solder Cup ST Cable Mount 5 Terminal 1 Port RoHS : Not Compliant |
| 2 | ||
| 746 | TE Connectivity | Straight Action Hand Tool RoHS : Compliant |
| 0 | ||
| 1N746D | Microchip Technology Inc | 3.3V 120mA 24 Ohms Voltage Regulator THT RoHS : Compliant |
| 0 | ||
| 20007464-00 | TE Connectivity | 52M30-2000-001-03 RoHS : Compliant |
| 0 | ||
| 2176746-4 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1767465 | Phoenix Contact | PCB headers - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 11 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.5 mm RoHS : Compliant |
| 0 | ||
| 1803074-6 | TE Connectivity | ANVIL COMBINATION END FEED RoHS : Not Compliant |
| 0 | ||
| 143-1746-000 | ITT Interconnect Solutions | INSUL ASSY KJLC13-8S; 38999 Series I II and III; RoHS : Compliant |
| 0 | ||
| 2364574-6 | TE Connectivity | AVH19 FLT SS LK PWR RED 12V16A RoHS : Compliant |
| 0 | ||
| 11107463-00 | TE Connectivity | AST4400C00350B4P0000-SS:CTO-13000000-03 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1047464 | Phoenix Contact | Distribution block - nom. voltage: 500 V - nominal current: 17.5 A - connection method: Push-in connection - Push-in connection - number of connections: 19 - cross section: 0.14 mm² - 2.5 mm² - AWG: 26 - 14 - width: 21.6 mm - color: pink - mounting type: NS 35/7 5 - NS 35/15 RoHS : Compliant |
| 0 | ||
| 097463-0013 | ITT Interconnect Solutions | Conn Socket Strip SKT 28 POS 1.27mm Solder Cup ST Cable Mount RoHS : Compliant |
| 0 | ||
| 097464-0012 | ITT Interconnect Solutions | MTV1-28PAL80; Micros; Micro RoHS : Compliant |
| 0 | ||
| 1-1474612-2 | TE Connectivity | FSK-23Z-24 MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE38746Z/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Water Blue FAKRA Jack to FAKRA Jack Low Loss Cable 24 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to FAKRA jack low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack to FAKRA jack low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assembly has a jack gender on end 1 and a jack on end 2. PE38746Z/HS-24 can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE38746Z/HS-24 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to FAKRA jack cable has a maximum VSWR of 1.4:1. FAKRA female to FAKRA female cable assembly PE38746Z/HS-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded.Both connectors have a crimp/solder attachment method and a plastic body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss FAKRA female to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to FAKRA low loss RF cable assembly as per your requirements. |
| 1,879 | |
| PE38746C | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50. Blue FAKRA Jack to FAKRA Jack Cable Using PE-C100-LSZH Coax. PE38746C is a FAKRA jack to FAKRA jack cable using PE-C100-LSZH coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38746C FAKRA jack to FAKRA jack cable assembly is constructed with PE-C100-LSZH coax and the maximum VSWR is 1.4:1. | 487 | |||
| PE3C8746/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-GR coax. | 394 | |||
| PE3C8746/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR-72, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR-72 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax. |
| 105 | ||
| PE38746C-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 12 inches. Blue FAKRA Jack to FAKRA Jack Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly blue FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Blue FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38746C-12, can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38746C-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this blue FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax. |
| 103 | ||
| PE38746D-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 60 inches. Bordeaux FAKRA Jack to FAKRA Jack Cable 60 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly bordeaux FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Bordeaux FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38746D-60, can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38746D-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bordeaux FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax. |
| 79 | ||
| PE38746Z-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 60 inches. Water Blue FAKRA Jack to FAKRA Jack Cable 60 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly water blue FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38746Z-60, can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38746Z-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to FAKRA jack cable 60 inch length using PE-C100-LSZH coax. |
| 79 | ||
| PE7465-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 10 Watts Up to 12.4 GHz. PE7465-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7465-20 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. The Pasternack PE7465-20 20 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7465-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement. |
| 4 | ||
| PE3C10746-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 2.4mm Female Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10746-6 1.85mm male to 2.4mm female RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10746-6 can also be known as a 1.85mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This PE3C10746-6 1.85mm plug to 2.4mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10746-6 can also be used in the other direction and will be a 2.4mm female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3W06746 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Push-On SMP Female Cable Using PE-SR405FL Coax. PE3W06746 is a TNC female bulkhead to SMP female cable using PE-SR405FL coax. This Pasternack TNC female bulkhead to SMP female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMP for connector 2. Our female TNC bulkhead to female SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W06746 TNC female bulkhead to SMP female cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W07464-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to N Female Cable 36 Inch Length Using RG402 Coax., Radio frequency assembly SMA male right angle to N female cable 36 inch length using RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to N female cable 36 inch length using RG402 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W07464-36 can also be known as a right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to N type jack cable assembly PE3W07464-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07464-36 can also be used in the other direction and will be N type female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female cable 36 inch length using RG402 coax. |
| 0 | ||
| PE38746K-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 36 inches. Curry FAKRA Jack to FAKRA Jack Cable 36 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly curry FAKRA jack to FAKRA jack cable 36 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Curry FAKRA jack to FAKRA jack cable 36 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38746K-36, can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38746K-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this curry FAKRA jack to FAKRA jack cable 36 inch length using PE-C100-LSZH coax. |
| 0 | ||
| PE36674-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-095 Series, RF Cable Type: 095 Series, RF Cable Impedance: 50 Ohm, Length: 60 inches. 2.92mm Male to 1.85mm Male Precision Cable 60 Inch Length Using 095 Series Coax, RoHS., Radio frequency assembly 2.92mm male to 1.85mm male precision cable 60 inch length using 095 series coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 1.85mm male precision cable 60 inch length using 095 series coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with 2.92mm cable connection on one end and 1.85mm cable connection on the other. Our precision 2.92mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 1.85mm cable is a male to male coax assembly, PE36674-60, can also be known as a precision 2.92mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 1.85mm plug cable assembly PE36674-60 is built with 095 series which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.92mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36674-60 can also be used in the other direction and will be 1.85mm male to 2.92mm male cable assembly if the opposite connectivity is required. Precision 2.92mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 1.85mm male precision cable 60 inch length using 095 series coax, RoHS. |
| 0 | ||
| PE7467-15 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 12 GHz, Nominal Attenuation: 15 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Male, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 15 dB Fixed Attenuator, SMA Male to SMA Female Brass Body Rated to 2 Watts, DC to 12 GHz. The PE7467-15 is a fixed 15 dB attenuator from Pasternack. This 15 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7467-15 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our radio frequency attenuator with SMA connectors is constructed with brass body material. This passive conectorized radio frequency attenuator has 0 dBc typical passive intermodulation. The conectorized bi-directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a female gender on side 1 and a SMA male connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 15 dB. The Pasternack PE7467-15 attenuator is rated for up to 12 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, WiFi 6E and 5G cellular bands applications. The attenuator has a 1.35:1 connector built with 1.35:1 plating. Our fixed RF attenuator PE7467-15 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 15 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE38746I-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 12 inches. Beige FAKRA Jack to FAKRA Jack Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly beige FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Beige FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38746I-12, can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38746I-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this beige FAKRA jack to FAKRA jack cable 12 inch length using PE-C100-LSZH coax. |
| 0 | ||
 Vyrian | NCV7462DQ0R2G | onsemi | Interface Circuit, PDSO36 RoHS : Compliant | 13,150 | ||
| STM32F746ZEY6TR | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, 216MHz, CMOS, PBGA143 RoHS : Compliant | 12,023 | |||
| 1827460 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,900 | |||
| MAX6746KA42+ | Analog Devices Inc | Power Management Circuit, Adjustable, 1 Channel, +4.2V, BICMOS, PDSO8 RoHS : Compliant | 10,683 | |||
| SN7460J | Texas Instruments | AND/NAND Gate, TTL/H/L Series, 2-Func, 4-Input, TTL, CDIP14 RoHS : Not Compliant | 9,199 | |||
| MAX6746KA36/V+T | Analog Devices Inc | Power Supply Management Circuit, Adjustable, 1 Channel, BICMOS, PDSO8 RoHS : Compliant | 9,193 | |||
| LTC1746CFW#TR | Analog Devices Inc | ADC, Proprietary Method, 14-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO48 RoHS : Not Compliant | 7,689 | |||
| BCM20746A0KFBGT | Broadcom Limited | 5,833 | ||||
| 1767465 | Phoenix Contact | Modular Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,764 | |||
| 2746980 | Phoenix Contact | Network Interface, 1-Trnsvr, CMOS, PQFP64 RoHS : Compliant | 4,400 | |||
| MS27467T15B97S-LC | Amphenol Corporation | 642 | ||||
| MS27466T11F35SC | Defense Logistics Agency | MIL Series Connector, 13 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle | 610 | |||
| MS27468T9B35PA | Defense Logistics Agency | MIL Series Connector, 6 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle | 340 | |||
| 7461110 | Wurth Elektronik | Terminals/Accessories | 325 | |||
| JANTX1N746A-1/TR | Microchip Technology Inc | Zener Diode, 3.3V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-204AH RoHS : Not Compliant | 240 | |||
 Waytek, Inc. | 91746 | FTZ Industries | 1-2GA 5/16 Stud Tinned Copper Eyelet Heavy Duty Pink Code ALT PN 36354 |
| 26 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand