| Electronic Components Datasheet Search |
|
750-101-R51 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 175019-5 | TE Connectivity | Terminal: flat; 4.75mm; crimped; non-insulated; tinned RoHS : Compliant |
| 8,000 | |
| 217501-2123 | Molex | Socket; female; 250V; PIN: 1; tinned; PVC; crimped |
| 1,100 | ||
| 1522750109 | Weidmüller Interface GmbH & Co. KG | Cable: for sensors; automatics |
| 33 | ||
| 1.30.247.501/0207 | RAFI GmbH & Co Kg | Switch: toggle |
| 12 | ||
| 3DP-PETG1.75-01-NAT | Gembird Electronics Ltd | Filament: PET-G; 1.75mm; natural; 220÷260°C; 1kg |
| 11 | ||
| 120975-01 | Amphenol Corporation | 120975-01 |
| 5 | ||
| TESTO 750-1 0590 7501 | Testo Limited | Tester: electrical; 100÷690VAC; VAC: 12÷690V; IP64; TESTO750 |
| 0 | ||
| 0087501200100 | ALPS MAYKESTAG GmbH | Drill: for concrete; Ø: 12mm; L: 450mm; metal; cemented carbide |
| 0 | ||
| 0090700750100 | ALPS MAYKESTAG GmbH | Drill: for metal; Ø: 7.5mm; L: 74mm; Working part len: 34mm |
| 0 | ||
| 0875010.MXEP | Littelfuse Inc | Fuse: fuse; 3.6x10mm; ceramic,cylindrical; THT; 10A; 250VAC; 875 RoHS : Compliant |
| 0 | ||
| 1SBL297501R1300 | ABB Low Voltage Products and Systems | Contactor: 4-pole; NC x2 + NO x2; 100÷250VAC,100÷250VDC; 38A |
| 0 | ||
| 1SBL347501R1400 | ABB Low Voltage Products and Systems | Contactor: 4-pole; NC x2 + NO x2; 250÷500VAC,250÷500VDC; 40A |
| 0 | ||
| 1SBL397501R1400 | ABB Low Voltage Products and Systems | Contactor: 4-pole; NC x2 + NO x2; 250÷500VAC,250÷500VDC; 80A |
| 0 | ||
| 2750110000 | Weidmüller Interface GmbH & Co. KG | Straight; SD; Blade length: 100mm; Overall len: 200mm |
| 0 | ||
| 3-147-501 | Schurter Electronic Components | Switch: vandal resistant; Pos: 2; SPDT; MSM II; 3A/125VAC; ON-(ON) |
| 0 | ||
![]() Avnet Americas | ERJ-2RKF7501X | Panasonic Electronic Components | SMD Chip Resistor, 7.5 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF7501X) |
| 70,000 | |
| RN55D7501FRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55D7501FRE6) RoHS : Not Compliant |
| 1,000 | ||
| RLR07C7501GMRE6 | Vishay Intertechnologies | Through Hole Resistor, 7.5 kohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C7501GMRE6) RoHS : Not Compliant |
| 1,000 | ||
| RN55D7501FB14 | Vishay Intertechnologies | - Bulk (Alt: RN55D7501FB14) RoHS : Not Compliant |
| 800 | ||
| UJ4SC075011B7S | onsemi | Silicon Carbide (SiC) Cascode JFET - EliteSiC, 11 mohm, 750V, D2PAK-7L - Tape and Reel (Alt: UJ4SC075011B7S) RoHS : Compliant |
| 800 | ||
| 929975-01-05 | 3M Interconnect | Conn Socket Strip SKT 10 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: 7010401220) RoHS : Compliant |
| 762 | ||
| RLR07C7501FSB14 | Vishay Intertechnologies | Through Hole Resistor, 7.5 kohm, RLR Series, 250 mW, ? 1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C7501FSB14) RoHS : Not Compliant |
| 700 | ||
| UJ4C075018K3S | onsemi | Silicon Carbide (SiC) Cascode JFET - EliteSiC, 18 mohm, 750V, TO-247-3L - Rail/Tube (Alt: UJ4C075018K3S) RoHS : Compliant |
| 600 | ||
| M8340107K7501FCD03 | Vishay Intertechnologies | - Rail/Tube (Alt: M8340107K7501FCD03) RoHS : Not Compliant |
| 304 | ||
| RNC55H7501FPB14 | Vishay Intertechnologies | - Bulk (Alt: RNC55H7501FPB14) RoHS : Not Compliant |
| 199 | ||
| 0031.7501 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 0031.7501) RoHS : Compliant |
| 180 | ||
| RN60D7501FB14 | Vishay Intertechnologies | Through Hole Resistor, 7.5 kohm, RN Series, 125 mW, ? 1%, Axial Leaded, 300 V, Metal Film - Bulk (Alt: RN60D7501FB14) RoHS : Not Compliant |
| 100 | ||
| LSHD-7501 | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LSHD-7501) RoHS : Compliant |
| 18 | ||
| ASD-221575-01 | Samtec Inc | ASD-221575-01 - Bulk (Alt: ASD-221575-01) RoHS : Compliant | 5 | |||
| MS27501B15A | Glenair Inc | - Bulk (Alt: MS27501B15A) RoHS : Not Compliant |
| 1 | ||
![]() Newark | MCWR06X7501FTL | SPC Multicomp | Res, 7K5, 1%, 0.1W, 0603, Thick Film; |Multicomp Pro MCWR06X7501FTL RoHS : Compliant |
| 20,261 | |
| MCWR06X7501FTL | SPC Multicomp | Res, 7K5, 1%, 0.1W, 0603, Thick Film; |Multicomp Pro MCWR06X7501FTL RoHS : Compliant |
| 20,261 | ||
| MCWR06X7501FTL | SPC Multicomp | Res, 7K5, 1%, 0.1W, 0603, Thick Film; |Multicomp Pro MCWR06X7501FTL RoHS : Compliant |
| 20,000 | ||
| ERA6VEB7501V | Panasonic Electronic Components | Res, 7K5, 0.1%, 0.125W, 0805; |Panasonic ERA6VEB7501V RoHS : Compliant |
| 10,000 | ||
| 167501-2 | TE Connectivity | Screw Lock, Female (Pk); |Te Connectivity Amp 167501-2 RoHS : Compliant |
| 7,864 | ||
| ERA6VEB7501V | Panasonic Electronic Components | Res, 7K5, 0.1%, 0.125W, 0805; |Panasonic ERA6VEB7501V RoHS : Compliant |
| 3,230 | ||
| ERA6VEB7501V | Panasonic Electronic Components | Res, 7K5, 0.1%, 0.125W, 0805; |Panasonic ERA6VEB7501V RoHS : Compliant |
| 3,230 | ||
| 7501K15 | Eaton Corporation | Toggle Switch, On-Off, Spst; |Eaton 7501K15 RoHS : Not Compliant |
| 1,359 | ||
AD75019JPZ-REEL![]() | Analog Devices Inc | Crosspoint Switch, Analogue, Plcc; |Analog Devices, Inc. AD75019JPZ-REEL RoHS : Compliant |
| 580 | ||
AD75019JPZ-REEL![]() | Analog Devices Inc | Crosspoint Switch, Analogue, Plcc; |Analog Devices, Inc. AD75019JPZ-REEL RoHS : Compliant |
| 580 | ||
| ZW-20-13-G-D-750-170 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. ZW-20-13-G-D-750-170 RoHS : Compliant |
| 123 | ||
| 2175012104 | Molex | Cable Assy, Crimp Rcpt-Free End, 300Mm; Connector To Connector:Micro-Lock Plus 2.0 Crimp Terminal Socket To Free End; Cable Length - Imperial:11.8"; Cable Length - Metric:300Mm; Product Range:Micro-Lock Plus Ots 217501 Series Rohs Compliant: Yes RoHS : Compliant |
| 98 | ||
| RK73H2BTTD7501F. | KOA Speer Electronics Inc | Res, 7K5, 1%, 0.25W, 1206; |Koa RK73H2BTTD7501F. RoHS : Compliant |
| 98 | ||
| RK73H2BTTD7501F. | KOA Speer Electronics Inc | Res, 7K5, 1%, 0.25W, 1206; |Koa RK73H2BTTD7501F. RoHS : Compliant |
| 98 | ||
| ACC750-1T48-PC | Bel Power Solutions | Power Supply, Ac-Dc, 48V, 15.6A; |Bel Power Solutions ACC750-1T48-PC RoHS : Compliant |
| 2 | ||
![]() Analog Devices Inc | AD75019JPZ-REEL![]() | Analog Devices Inc | 256 Analog Switches in a 16x16 RoHS : Compliant |
| 97,192 | |
AD75019JPZ![]() | Analog Devices Inc | 256 Analog Switches in a 16x16 RoHS : Compliant |
| 53,102 | ||
| MAX77501EWV+ | Analog Devices Inc | Piezo Haptic Driver RoHS : Compliant | 12,573 | |||
| MAX7501MSA+ | Analog Devices Inc | Digital Temperature Sensors an RoHS : Compliant |
| 8,013 | ||
| MAX77501EWV+T | Analog Devices Inc | Piezo Haptic Driver RoHS : Compliant |
| 7,500 | ||
| MAX17501EATB+T | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant |
| 1,802 | ||
| MAX17501FATB+T | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant |
| 1,313 | ||
| MAX7501MUA+ | Analog Devices Inc | Digital Temperature Sensors an RoHS : Compliant |
| 1,148 | ||
| MAX17501AATB+ | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant | 618 | |||
| MAX17501EATB+ | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant | 418 | |||
| MAX17501BATB+T | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant |
| 379 | ||
AD5750-1BCPZ![]() | Analog Devices Inc | PLC OUT DRIVER +/-24V 0-2.5V I RoHS : Compliant |
| 124 | ||
| MAX7501MUA+T | Analog Devices Inc | Digital Temperature Sensors an RoHS : Compliant |
| 0 | ||
AD5750-1ACPZ![]() | Analog Devices Inc | PLC OUT DRIVER +/-24V 0-2.5V I RoHS : Compliant |
| 0 | ||
| MAX17501FATB+ | Analog Devices Inc | 60V, 500mA, 600kHz Synchronous RoHS : Compliant | 0 | |||
![]() RS | 7501K15 | Eaton Vehicle and Commercial Controls | TOGGLE SWITCH, SPST, ON-NONE-OFF, GENERAL PURPOSE,15A,125VAC,10A,250VAC,.250" QC |
| 1,585 | |
| 2451089 (25531460) (MPPFI-1000750-100RS) | RS Pro | SCREW, #10-32 X 3/4 PHILLIPS PAN MACHINE, ZINC PLATED |
| 28 | ||
| 78072750138 | Norton Winter | BLUEFIRE CLOTH NARROW BACKSTAND BELT 36GRIT R884P ZA, 3 X 132 IN. |
| 10 | ||
| TCTL2-1/0-1/2-IV-U (EN3750-168) | TE Connectivity | CONNECTOR, CU LUG 2 HOLE LONG BARREL 1/0 AWG , 1/2 IN STUD HOLE |
| 9 | ||
| TCTL2-750-1/2-IV-U (EN3750-161) | TE Connectivity | CONNECTOR, CU LUG 2 HOLE LONG BARREL 750 KCMIL , 1/2 IN STUD HOLE |
| 8 | ||
| 2451181 (25531058) (MPRI02501750-100RS) | RS Pro | 1/4-20 X 1 3/4 PHILLIPS ROUND MACHINE SCREW ZINC PLATED |
| 8 | ||
| 40X80X8TC-BX (0075015038) | Dichtomatik | OIL SEAL, 40MM ID, 80MM OD, 8MM WIDTH, N701R MATERIAL |
| 5 | ||
| 65X85X8TC-BX (0075017772) | Dichtomatik | OIL SEAL, 65MM ID, 85MM OD, 8MM WIDTH, N701R MATERIAL |
| 5 | ||
| 2454988 (25532604) (SSCIA0750175-010RS) | RS Pro | SCREW, 3/4-10 X 1 3/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 5 | ||
| 2451780 (25531540) (MPOFI-1000750-100RS) | RS Pro | SCREW, #10-32 X 3/4 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 5 | ||
| 2454985 (25532601) (SSCIA0750100-025RS) | RS Pro | SCREW, 3/4-10 X 1 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 5 | ||
| MP850-75.0-1% | Caddock Electronics Inc | RESISTOR, POWER FILM, TO-220 STYLE, 75 OHM, 1%, 50W RoHS : Compliant |
| 3 | ||
| 2451515 (25534154) (CPI01401750-100RS) | RS Pro | COTTER PINS, DIAMETER 9/64 X 1 3/4 IN LENGTH, IMPERIAL, STEEL, ZINC FINISH |
| 3 | ||
| 2454579 (25533731) (HFI808707501NA-010RS) | RS Pro | 7/8-14 X 7 1/2 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 25X32X4TM-BX (0075010668) | Dichtomatik | OIL SEAL, 25MM ID, 32MM OD, 4MM WIDTH, N701R MATERIAL |
| 1 | ||
![]() Microchip Technology Inc | MIC37501-2.5WR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-08-25 RoHS : Compliant |
| 10,056 | |
| LE87501NQCT | Microchip Technology Inc | 1CH PLC Driver Class AB, 16QFN, T&R, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 10,000 | ||
| MIC37501-1.8WR-TR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2035-12-28 RoHS : Compliant |
| 4,500 | ||
| MIC37501-3.3WR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-01-16 RoHS : Compliant |
| 3,153 | ||
| MIC37501-1.8WR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-03-08 RoHS : Compliant |
| 2,915 | ||
| LE87501NQC | Microchip Technology Inc | 1CH PLC Driver Class AB, 16QFN, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 2,450 | ||
| PIC7501 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 39 | ||
| UM7501F | Microchip Technology Inc | Si PPIN Hermetic MELF, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| 920-50375-01 | Microchip Technology Inc | TP5000 PTP PROBE LICENSE, Projected EOL: 2051-01-13 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| MIC37501-1.5WR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-03-22 RoHS : Compliant |
| 0 | ||
| MIC37501-1.65WR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 0 | ||
| MIC37501-1.5WR-TR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-04-27 RoHS : Compliant |
| 0 | ||
| MIC37501-2.5WR-TR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2035-12-28 RoHS : Compliant |
| 0 | ||
| MIC37501-1.65WR-TR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 0 | ||
| MIC37501-3.3WR-TR | Microchip Technology Inc | 5A Low Voltage LDO Regulator, SPAK, Projected EOL: 2036-04-20 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 8975-0-15-01-21-27-10-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 215 | ||
| GP3H-156X0750-14 | Groov-Pin Corporation | 202 | ||||
| 750-1408 | Concord Electronics Inc | 109 | ||||
| SS69790.375-01 | Lyn-Tron Inc | 86 | ||||
| SS-7501-632-12 | Globe Electronic Hardware Inc | 50 | ||||
| 167501-2 | TE Connectivity | RoHS : Compliant | 50 | |||
| 750-1004 | Concord Electronics Inc | 30 | ||||
| 14270RSS1.750-12A | Accurate Screw Machine | 27 | ||||
| 750-1204 | Concord Electronics Inc | 23 | ||||
| 14090-H-SS-.750-12 | Accurate Screw Machine | 20 | ||||
| SS6950-0440-0.875-01 | Lyn-Tron Inc | 10 | ||||
| 750-1002 | Concord Electronics Inc | 6 | ||||
| MS27501B13A | Glenair Inc | 4 | ||||
| 125-7501-FBQ | RCD Components Inc | RoHS : Not Compliant | 2 | |||
| SS6951-0632-0.875-01 | Lyn-Tron Inc | 1 | ||||
![]() Rochester Electronics | MAX77501EWV+ | Analog Devices Inc | Piezo Haptic Driver RoHS : Compliant |
| 1,608 | |
| MAX7501MSA+ | Analog Devices Inc | Temperature Sensor ICs I²C/SMBus Digital, Local 8-SOIC Tube RoHS : Compliant |
| 4,340 | ||
AD5750-1BCPZ![]() | Analog Devices Inc | Special Purpose Amplifier Driver 1 CH 32-QFN Tray RoHS : Compliant |
| 144 | ||
TPS77501D![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.5V 500mA 8-SOIC Tube RoHS : Compliant |
| 125 | ||
TPS77501QPWPRQ1![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.5V 500mA 20-SOP T/R RoHS : Compliant |
| 17,950 | ||
CSD87501LT![]() | Texas Instruments | MOSFET 2 N-Channel, Common Drain 30V 14A (Ta) 10-LGA T/R RoHS : Compliant |
| 7,750 | ||
BQ27501DRZR![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO12 RoHS : Compliant |
| 2,617 | ||
JM38510/37501BCA![]() | Texas Instruments | OR Gate, ALS Series, 4-Func, 2-Input, TTL, CDIP14 RoHS : Not Compliant |
| 102 | ||
CSD87501L![]() | Texas Instruments | MOSFET 2 N-Channel, Common Drain 30V 14A (Ta) 10-LGA T/R RoHS : Compliant |
| 161,229 | ||
| A17501POKATN-SDFRYJE | Allegro MicroSystems LLC | Angular and Linear Position Sensor Magnetoresistive Analog Voltage 4-SIP RoHS : Compliant |
| 1,365 | ||
| ATS17501PSGATN-XDFUYJ | Allegro MicroSystems LLC | Dual Output Differential Speed and Direction Sensor IC |
| 572 | ||
| 8407501EA | Harris Semiconductor | Counters and Frequency Divider Binary Counter 1 Element 4 Bits 2.5V, 3.3V, 5V 16-DIP Tube RoHS : Not Compliant |
| 159 | ||
| RGE7501MC | Intel Corporation | Intel E7501 Chipset Memory Controller Hub (MCH) |
| 2,024 | ||
| PHY1075-01QD-BR | Maxim Integrated Products | Laser Driver Laser Diode Driver (Fiber Optic) 4.25Gbps 1 CH 36-QFN RoHS : Not Compliant |
| 622 | ||
| SKY13750-11 | Skyworks Solutions Inc | MB/HB Diversity Receive LNA Module RoHS : Compliant |
| 974,032 | ||
![]() Sager | UMMYA-0750-1750-1 | ARATAS Americas | Anti-Static Control Products YEL,0750mmx1750mm,One 4-pin,M8 | 0 | ||
| UMMA-0750-1750-1 | ARATAS Americas | Anti-Static Control Products BLK,0750mmx1750mm,One 4-pin,M8 | 0 | |||
| BSS-075-01-F-D-A-TR | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Basic Blade & Beam Socket Strip, Edge Mount RoHS : Compliant |
| 0 | ||
| BTS-075-01-F-D-A-K | Samtec Inc | Board to Board & Mezzanine Connectors 0.635 mm Basic Blade & Beam Terminal Strip RoHS : Compliant |
| 0 | ||
| T1750102220-000 | TE Connectivity | Heavy Duty Power Connectors H10B-TBFH-2M20 RoHS : Compliant |
| 0 | ||
| TCMD-10-T-02.75-01-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCMD-12-T-02.75-01-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCMD-12-T-15.75-01-N | Samtec Inc | Ribbon Cables / IDC Cables 2.00 mm IDC Ribbon Cable Assembly, Terminal RoHS : Compliant |
| 0 | ||
| TCMD-25-T-10.75-01 | Samtec Inc | Ribbon Cables / IDC Cables 2.00 mm IDC Ribbon Cable Assembly, Terminal RoHS : Compliant |
| 0 | ||
| TCSD-05-S-02.75-01-F-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCSD-08-D-02.75-01-F-N | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| TCSD-08-D-02.75-01-F-P14-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCSD-10-D-09.75-01-F-N-P01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| TCSD-17-D-02.75-01-F-N-P01 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCSD-22-D-04.75-01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | RK73H1ELTP7501F | KOA Speer Electronics Inc | RoHS : Not Compliant | 47,858 | ||
| MCR03SEQPF7501 | ROHM Semiconductor | 1608(0603)尺寸 大功率保证型 方形贴片电阻器(符合AEC-Q200标准) RoHS : Compliant |
| 20,000 | ||
| KTR03EZPF7501 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR10EZPD7501 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| MCR01SMQPF7501 | ROHM Semiconductor | 1005(0402)尺寸 大功率保证型 方形贴片电阻器(符合AEC-Q200标准) RoHS : Compliant |
| 10,000 | ||
| SDR10EZPD7501 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| ESR01MZPF7501 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR03EZPD7501 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| 232272467501L | NXP Semiconductors | 5,463 | ||||
| SFR03EZPF7501 | ROHM Semiconductor | 抗硫化贴片电阻器 RoHS : Compliant |
| 5,000 | ||
| MCR18SEQPF7501 | ROHM Semiconductor | 3216(1206)尺寸 大功率保证型 方形贴片电阻器(符合AEC-Q200标准) RoHS : Compliant |
| 5,000 | ||
| LTR100JZPF7501 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 4,000 | ||
| BU97501KV-E2 | ROHM Semiconductor | 低Duty LCD段码驱动器 RoHS : Compliant |
| 1,000 | ||
AD75019JPZ![]() | Analog Devices Inc | AD75019JPZ 16 x 16 交叉点开关, 44针 PLCC封装 RoHS : Compliant | 89 | |||
| BD77501G-TR | ROHM Semiconductor | RoHS : Compliant |
| 80 | ||
![]() ComSIT USA | RK73H1ETTP7501F | AVAILABLE EU | 176,798 | |||
| PMF0027501A | LOYALTY FOUNDER ENTERPRISE | AVAILABLE EU | 2,430 | |||
![]() ComSIT USA | MCT06030C7501FP500 | Vishay Semiconductors | PROFESSIONAL THIN FILM CHIP RESISTOR Fixed Resistor, Thin Film, 0.1W, 7500ohm, 75V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 32,120 | ||
| CR217501FK | ASJ Holdings Limited | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 7500ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 20,000 | |||
| MBB02070C7501FCT00 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 0.4W, 7500ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 15,000 | |||
| CR0603FX7501ELF | Bourns Inc | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 7500ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 14,698 | |||
| RK73H1ETTP7501 | KOA Speer Electronics Inc | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.1W, 7500ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 10,000 | |||
| RK73H1ETTP7501F | KOA Speer Electronics Inc | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 7500ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 10,000 | |||
| TSTS7501 | tfk | GAAS IR EMITTING DIODE IN HERMETICALLY SEALED TO-18 CASE Infrared LED, 3.9mm, 1-Element, 950nm RoHS : Not Compliant | 5,500 | |||
| TRR10EZPF7501 | ROHM Semiconductor | SULFUR TOLERANT CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 7500ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,000 | |||
| SMM02040C7501FBE00 | Vishay Intertechnologies | THIN FILM MINI-MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 7500ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 2,500 | |||
| JGE7501MC | Intel Corporation | Dynamic RAM (DRAM) Tray RoHS : Compliant | 8 | |||
AD7501SQ![]() | Analog Devices Inc | 8-CHANNEL ANALOG MULTIPLEXER Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, CDIP16 RoHS : Not Compliant | 4 | |||
| 59629317501MXA | Texas Instruments | 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP48 RoHS : Not Compliant | 3 | |||
![]() Interstate Connecting Components | 300081-7501 | Molex | PASS THRU 2X3 HB REC KEY A BLK |
| 250 | |
| 3075010000 | Weidmüller Interface GmbH & Co. KG | WINTRISS CUSTOM |
| 6 | ||
| 750-156-08 | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 750-191-80NC | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 750-192-08BNV | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 750-192-08CCB | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 750-192-16BBE | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| 750-192-20BTV | Glenair Inc | METAL CORE CABLE/CONDUIT | 0 | |||
| T1750102220-000 | TE Connectivity | H10B-TBFH-2M20 RoHS : Compliant |
| 0 | ||
| T3475018U | Amphenol Sine Systems | MALE PLUG 7 PIN SOLDER GOLD 4- | 0 | |||
| 154175-0103 MS | ITT Interconnect Solutions | M8351331-D02NT | 0 | |||
| 130775-0118 MS | ITT Interconnect Solutions | M243083-14Z | 0 | |||
| 10129475-0100APLF | Amphenol FCi | RoHS : Compliant |
| 0 | ||
| 3-2275010-0 | TE Connectivity | ASSY,EN3660-004, AL-NI BACKSHE | 0 | |||
| 321575-011 | TE Connectivity | EPKT-17D3MIH2 | 0 | |||
![]() NexGen Digital | RK73H1ETTP7501F | KOA Speer Electronics Inc | RoHS : Compliant | 14,535 | ||
| MBB0207-50-1%-5T-2M74 | Vishay Huntington | 5,000 | ||||
| MBB0207-50-15-1%-1K15 | Vishay Huntington | 5,000 | ||||
| MBB0207-50-1%-5T-2M94 | Vishay Huntington | 4,940 | ||||
| MBB0207-50-1%-5T-3M09 | Vishay Huntington | 4,940 | ||||
| XLS108XD0750-11 | Broadcom Limited | 2,773 | ||||
CSD87501L![]() | Texas Instruments | RoHS : Compliant | 2,500 | |||
| MBB0207-50 1% 5T 4K22 | Vishay Huntington | 500 | ||||
| MBB0207-50 1% 5T 4K32 | Vishay Huntington | 500 | ||||
| 82MCX-75-0-1 | HUBER+SUHNER | 22 | ||||
![]() PEI Genesis | MS27501B15C | Amphenol PCD |
| 86 | ||
| MS27501B25CL | Amphenol PCD |
| 67 | |||
| MS27501B25C | Amphenol PCD |
| 6 | |||
| MS27501B9C | Amphenol PCD |
| 4 | |||
| MS27501B23C | Amphenol PCD |
| 1 | |||
| MS27501A23C | Amphenol Corporation |
| 0 | |||
| C10-737501-001 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | ERM8-075-01-L-D-RA-K-TR | Samtec Inc | 0.80 mm Edge Rate Rugged High-Speed Term RoHS : Compliant |
| 4,213 | |
| 10129475-0100APLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,155 | ||
| QTS-075-01-F-D-RA-WT | Samtec Inc | HS MEZZ HEADER 75POS 2ROW RoHS : Compliant |
| 559 | ||
| 10-036675-016 | Amphenol Corporation | GASKET |
| 499 | ||
| L9000175-01 | TE Connectivity | Connectors |
| 454 | ||
| ZW-16-12-S-D-750-180 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 292 | ||
| ZW-20-13-G-D-750-170 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 81 | ||
| MS27501B15C | Amphenol PCD | 38999S1 D/C PLUG SZ 15 CAD OD |
| 57 | ||
| ZW-50-13-L-S-750-168 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 51 | ||
| 10-538675-017 | Amphenol Corporation | Connector |
| 14 | ||
| MS27501C25A | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 13 | ||
| MS27501C23CN | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 12 | ||
| MS27501B15C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 7 | ||
| 167501-2 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 1 | ||
| MS27501F17CL | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 1 | ||
![]() PUI | 12.87501 | 675 | ||||
| 87501-0101 | 25 | |||||
![]() Chip 1 Exchange | ERJ-2RKF7501X | Panasonic Electronic Components | INSTOCK | 38,180 | ||
| 34750-1003 | INSTOCK | 21,000 | ||||
| CR10-7501-F# | ASJ Holdings Limited | INSTOCK | 8,448 | |||
| MBB/SMA0207-50 1% RB N4 1M15 | INSTOCK | 8,000 | ||||
| RN73H1ETTP7501B10 | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 7,950 | |||
| 34750-1003 | Molex | INSTOCK | 7,000 | |||
| SMM0204507501%BE | Vishay Draloric | INSTOCK | 3,575 | |||
| MBB0207-501% | Vishay Beyschlag | INSTOCK | 700 | |||
| MBB0207-50 1% 39R2 2201561 | Vishay Intertechnologies | INSTOCK | 560 | |||
| SMA0207-50 1% C1 9K76 | Vishay Intertechnologies | INSTOCK | 406 | |||
| 1545.N0750.18 | MRTCC | INSTOCK | 35 | |||
| 1545.N0750.18 | INSTOCK | 25 | ||||
| 750101R10K | CTS Corporation | INSTOCK RoHS : Unknown | 10 | |||
| 1D50857-501 | INSTOCK | 9 | ||||
| 1488750-1 | TE Connectivity | INSTOCK | 8 | |||
![]() Avnet Abacus | 457501111 | Molex | Contact MiniFit Plus 45750 Series Socket Crimp 18 AWG Tin Plated Contacts (Alt: 457501111) RoHS : Compliant | 980,000 | ||
| ERJ2RKF7501X | Panasonic Electronic Components | SMD Chip Resistor 75 kohm 1 100 mW 0402 1005 Metric Thick Film - Tape and Reel (Alt: ERJ2RKF7501X) RoHS : Compliant | 60,000 | |||
| RK73H1ETTP7501F | KOA Speer Electronics Inc | SMD Chip Resistor 75 kohm 1 100 mW 0402 1005 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1ETTP7501F) RoHS : Compliant | 50,000 | |||
| MCT06030D7501BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030D7501BP500) RoHS : Compliant | 50,000 | |||
| MCS04020D7501BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D7501BE000) RoHS : Compliant | 50,000 | |||
| MMU01020C7501FB300 | Vishay Intertechnologies | Surface Mount MELF Resistor 75 kohm MMU Series 100 V Metal Film 200 mW 1 - Tape and Reel (Alt: MMU01020C7501FB300) RoHS : Compliant | 21,000 | |||
| 167501-2 | TE Connectivity | Screw Lock for AMPLIMITE Series DSubminiature Connectors Steel Black Bulk (Alt: 167501-2) RoHS : Compliant | 20,950 | |||
| RK73H1JTTD7501F | KOA Speer Electronics Inc | Res Precision Thick Film 0603 75k Ohm 1 110W 100ppmC Molded Paper TR - Tape and Reel (Alt: RK73H1JTTD7501F) RoHS : Compliant | 20,000 | |||
| 457501211 | Molex | Contact MiniFit Plus 45750 Socket Crimp 18 AWG Gold Plated Contacts (Alt: 457501211) RoHS : Compliant | 16,000 | |||
| ATB2012-75011-T000 | TDK Corporation | Chip Balun 75ohm 75ohm 08 dB 0805 50 MHz 12 GHz (Alt: ATB2012-75011-T000) RoHS : Compliant | 14,000 | |||
| ERA3VEB7501V | Panasonic Electronic Components | SMD Chip Resistor 75 kohm 01 125 mW 0603 1608 Metric Thin Film (Alt: ERA3VEB7501V) RoHS : Compliant | 5,000 | |||
| SMM02040C7501FB300 | Vishay Intertechnologies | Surface Mount MELF Resistor Mini MELF 75 kohm SMM Series 200 V Thin Film 250 mW 1 - Tape and Reel (Alt: SMM02040C7501FB300) RoHS : Compliant | 3,000 | |||
| 0680L0375-01 | Bel Fuse | - Tape and Reel (Alt: 0680L0375-01) RoHS : Compliant | 1,000 | |||
| MCU08050D7501BP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCU08050D7501BP100) RoHS : Compliant | 1,000 | |||
| 6127501301 | Varta | Lithium Manganese Dioxide Cylindrical 3V 095Ah 12AA Primary (Alt: 6127501301) RoHS : Not Compliant | 120 | |||
![]() Avnet Asia | AXK750147G | Panasonic Electronic Components | (Alt: AXK750147G) RoHS : Compliant | 6,140 | ||
| 1717501022 | Molex | (Alt: 1717501022) RoHS : Compliant | 330 | |||
| ASP-174775-01 | Samtec Inc | (Alt: ASP-174775-01) RoHS : Compliant | 0 | |||
| ERM8-075-01-L-D-RA-K-TR | Samtec Inc | Mezzanine Connector, Header, 0.8 mm, 2 Rows, 150 Contacts, Surface Mount Right Angle (Alt: ERM8-075-01-L-D-RA-K-TR) RoHS : Compliant | 0 | |||
| 51750-137LF | Amphenol Corporation | (Alt: 51750-137LF) RoHS : Compliant | 0 | |||
| 957-5011 | Amphenol Corporation | (Alt: 957-5011) RoHS : Compliant | 0 | |||
| 55917-501LF | Amphenol Corporation | (Alt: 55917-501LF) RoHS : Compliant | 0 | |||
| MCS04020C7501FE000 | Vishay Intertechnologies | (Alt: MCS04020C7501FE000) RoHS : Compliant | 0 | |||
| 10158750-101LF | Amphenol Corporation | 8P8C, RA, CAT6, SMT, SHEILD WITH TOP AND SIDE EMI TABS, WITH LEDS (Alt: 10158750-101LF) RoHS : Compliant | 0 | |||
| ERF8-075-01-L-D-RA-TR | Samtec Inc | Mezzanine Connector, High-Speed, Receptacle, 0.8 mm, 2 Rows, 150 Contacts (Alt: ERF8-075-01-L-D-RA-TR) RoHS : Compliant | 0 | |||
| ERJ6ENF7501V | Panasonic Electronic Components | SMD Chip Resistor, 7.5 kohm, ? 1%, 125 mW, 0805 [2012 Metric], Thick Film (Alt: ERJ6ENF7501V) RoHS : Compliant | 0 | |||
| 10181750-100A00LF | Amphenol Corporation | FCI10181750-100A00LF TOLERANCES UNLESS O (Alt: 10181750-100A00LF) RoHS : Compliant | 0 | |||
| 10194750-101LF | Amphenol Corporation | (Alt: 10194750-101LF) RoHS : Compliant | 0 | |||
| ERJS02D7501X | Panasonic Electronic Components | SMD Chip Resistor, 7.5 kohm, ? 0.5%, 100 mW, 0402 [1005 Metric], Thick Film, Anti-Sulfur (Alt: ERJS02D7501X) RoHS : Compliant | 0 | |||
| PR01000107501JA100 | Vishay Intertechnologies | (Alt: PR01000107501JA100) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ACT43750-101T | Qorvo | (Alt: ACT43750-101T) RoHS : Compliant | 0 | ||
| LE87501NQCT | Microchip Technology Inc | (Alt: LE87501NQCT) RoHS : Compliant | 0 | |||
| BU97501KV-E2 | ROHM Semiconductor | (Alt: BU97501KV-E2) RoHS : Compliant | 0 | |||
| BU97501KV-ME2 | ROHM Semiconductor | LCD Segment Driver 6V 64Pin VQFP TR (Alt: BU97501KV-ME2) RoHS : Compliant | 0 | |||
| MIC37501-2.5WR | Microchip Technology Inc | 5A LOW VOLTAGE LDO REGULATOR (Alt: MIC37501-2.5WR) RoHS : Compliant | 0 | |||
| UJ4C075018K3S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 18 mohm 750V TO2473L (Alt: UJ4C075018K3S) RoHS : Compliant | 0 | |||
| UJ4SC075011B7S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 11 mohm 750V D2PAK7L (Alt: UJ4SC075011B7S) RoHS : Compliant | 0 | |||
| UJ4SC075011K4S | onsemi | Silicon Carbide MOSFET Single N Channel 104 A 750 V 11 mohm TO247 (Alt: UJ4SC075011K4S) RoHS : Compliant | 0 | |||
| UG4SC075011K4S | onsemi | Silicon Carbide SiC Combo JFET EliteSiC 10 mohm 750V TO2474L (Alt: UG4SC075011K4S) RoHS : Compliant | 0 | |||
| UJ4C075018K4S | onsemi | Silicon Carbide MOSFET Single N Channel 81 A 750 V 18 mohm TO247 (Alt: UJ4C075018K4S) RoHS : Compliant | 0 | |||
| UJ4SC075018L8S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC18 mohm 750VTOLL (Alt: UJ4SC075018L8S) RoHS : Compliant | 0 | |||
| L1IG-0750100000000 | Lumileds | IR Emitter 1050nm 500mA 34V 2Pin SMD TR (Alt: L1IG-0750100000000) RoHS : Compliant | 0 | |||
| DTR0000175017-EU(ALS) | Sanmina Corporation | (Alt: DTR0000175017-EU) RoHS : Compliant | 0 | |||
| DTR0000175017 -EU (ALS) | Sanmina Corporation | (Alt: DTR0000175017 -EU) RoHS : Compliant | 0 | |||
| DTR0000175017-100M (ALS) | Sanmina Corporation | (Alt: DTR0000175017-100M) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 92-97217-5010 | ADLINK Technology Inc | GPU NVIDIA RTX2000E Ada-ATX |
| 0 | |
| TRG10R075-01E03 VI | Cincon Electronics Corporation | ADAPTER AC-DC |
| 0 | ||
![]() Component Electronics, Inc | MBB0207-50-1%-5T-3K65 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 23,107 | |
| MBB0207-50-1%-RP-243R | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 10,150 | ||
| MBB0207-50-1%-5T-5R11 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 10,000 | ||
| MBB0207-50-1%-5T-232R | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 5,000 | ||
| MBB0207-50-1%-5T-14K0 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,080 | ||
| MBB0207-50-1%-5T-29K4 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,000 | ||
| MBB0207-50-1%-5T-35K7 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,000 | ||
| MBB0207-50-1%-5T-30K1 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 800 | ||
| MBB0207-50-1%-5T-39K2 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 350 | ||
| MBB0207-50-1%-5T-7K5 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 309 | ||
| MBB0207-50-1%-5T-24K9 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 250 | ||
| CR1206F7501T1 | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| 750-101-R1M | RCD Components Inc | IN STOCK SHIP TODAY |
| 130 | ||
| CMF-50-750-1%T-2B14 | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| MBB0207-50-1%-5T-113K | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 100 | ||
![]() DB Roberts | 97-50-120-12 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. |
| 541 | |
| SS6950-0440-0.875-01 | Lyn-Tron Inc |
| 93 | |||
| 0375010200XM225 | Essentra Components | HEX BOLT, 34-10 THREAD, 2 LG | 0 | |||
| DM2750-1-1/2B | Essentra Components | 2.750 ID 1.500 LENGTHPVC DIP Y | 0 | |||
| 4750-1 MOD | RAF Electronic Hardware | 3/16 HEX X 3/16 TL X 4-40 | 0 | |||
| DM0750-1-1/2D | Essentra Components | 0.750 ID 1.500 LENGTHPVC DIP Y | 0 | |||
| DM3750-1B | Essentra Components | 3.750 ID 1.000 LENGTHPVC DIP Y | 0 | |||
| DMS0750-1-1/2A | Essentra Components | .750IN ID 1.50IN LENGTHSOFT RE | 0 | |||
| DM3750-1A | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
| 97-50-111-21 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 97-50-124-25 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 97-50-155-21 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 13RS075013B | Essentra Components | ROUND SPACER, .255 ID, .750 OD | 0 | |||
| 0475014PJNB | Essentra Components | HEX JAM NUT, 34-14 THREAD, .41 | 0 | |||
| 13RS075014 | Essentra Components | ROUND SPACER, .631 ID, .750 OD | 0 | |||
![]() EBV Elektronik | HDSP-7501 | Broadcom Limited | 7 Segment LED Display Red 20 mA 2 V 539 mcd 1 76 mm (Alt: HDSP-7501) RoHS : Compliant | 21,000 | ||
| UJ4SC075018L8S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC18 mohm 750VTOLL (Alt: UJ4SC075018L8S) RoHS : Compliant | 2,000 | |||
| HDSP-7501-GH000 | Broadcom Limited | S403MAllnGaPRedCA (Alt: HDSP-7501-GH000) RoHS : Compliant | 200 | |||
| 05-50075-01 | Broadcom Limited | (Alt: 05-50075-01) RoHS : Compliant | 0 | |||
| GC4750-115-2 | Microchip Technology Inc | Diode PIN Attenuator 250V 2Pin (Alt: GC4750-115-2) RoHS : Compliant | 0 | |||
| LE87501NQC | Microchip Technology Inc | (Alt: LE87501NQC) RoHS : Compliant | 0 | |||
| UJ4C075018K3S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 18 mohm 750V TO2473L (Alt: UJ4C075018K3S) RoHS : Compliant | 0 | |||
| MIC37501-3.3WR | Microchip Technology Inc | (Alt: MIC37501-3.3WR) RoHS : Compliant | 0 | |||
| UJ4C075018K4S | onsemi | Silicon Carbide MOSFET Single N Channel 81 A 750 V 18 mohm TO247 (Alt: UJ4C075018K4S) RoHS : Compliant | 0 | |||
| FJ8071506167501S RQ6S | Intel Corporation | Intel Core 5 processor 220H 18M Cache up to 490 GHz FCBGA16F Tray (Alt: 99CMA6) RoHS : Compliant | 0 | |||
| XMC7501SCQ040XAAXUMA1 | Infineon Technologies AG | (Alt: SP003038020) RoHS : Compliant | 0 | |||
| XBT-3535-UV-A130H-DA275-01 | Luminus Devices | Surface Mount UVC LED (Alt: XBT-3535-UV-A130H-DA275-01) RoHS : Compliant | 0 | |||
| XBT-3535-UV-A130-CD275-01-STARBOARD | Luminus Devices | LED Single Chip Ultra Violet 800mA 2Pin SMD TR (Alt: XBT-3535-UV-A130-CD275-01-STARBOARD) RoHS : Not Compliant | 0 | |||
![]() ECCO | SM111-02-0750-17X | ECCO Connectors |
| 7,767 | ||
| T3475013U | Amphenol Tuchel |
| 240 | |||
| T3475013 | Amphenol Tuchel |
| 240 | |||
| CM111-03-0375-012 | ECCO Connectors |
| 116 | |||
| 130775-0115 | ITT Interconnect Solutions |
| 20 | |||
| 130775-0115-MS | ITT Interconnect Solutions |
| 20 | |||
| 130775-0124-MS | ITT Interconnect Solutions |
| 3 | |||
| 130775-0124 | ITT Interconnect Solutions |
| 3 | |||
![]() Flip Electronics | ESD7501MUT5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 557,353 | |
| UJ4SC075018L8S-D | onsemi | Stock, Ship Today | 2,000 | |||
| ESS030W-1750-14 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 959 | ||
| ESS030W-1750-14-Z1 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 244 | ||
![]() Master Electronics | UMMA075017501 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | |
| UMMYA075017501 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| BSS-075-01-F-D-A-TR | Samtec Inc | 0.635 mm Basic Blade & Beam Socket Strip Edge Mount RoHS : Compliant |
| 0 | ||
| BTS-075-01-F-D-A-K | Samtec Inc | 0.635 mm Basic Blade & Beam Terminal Strip RoHS : Compliant |
| 0 | ||
| T1750102220-000 | TE Connectivity | H10B-TBFH-2M20 RoHS : Compliant |
| 0 | ||
| T3475018U | Amphenol Tuchel | Male cable connector with internal strain relief and metal locking ring. Screw locking according to IEC 61076-2-106. Contacts included. RoHS : Compliant |
| 0 | ||
| TCMD-10-T-02.75-01-N | Samtec Inc | Cable Assembly Flat Ribbon 0.069m 28AWG 20 POS IDC Connector to 20 POS IDC Connector M-F IDT-IDT Bulk RoHS : Compliant |
| 0 | ||
| TCMD-12-T-02.75-01-N | Samtec Inc | Cable Assembly Flat Ribbon 0.069m 28AWG 24 POS IDC Connector to 24 POS IDC Connector M-F IDT-IDT Bulk RoHS : Compliant |
| 0 | ||
| TCMD-12-T-15.75-01-N | Samtec Inc | Ribbon Cables / IDC Cables 2.00 mm IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| TCMD-25-T-10.75-01 | Samtec Inc | 2.00 MM IDC RIBBON CABLE RoHS : Compliant |
| 0 | ||
| TCSD-05-D-09.75-01-N-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-05-S-02.75-01-F-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-08-D-02.75-01-F-N | Samtec Inc | Idc Socket Cable Assemblies 2.00Mm Pitch |Samtec TCSD-08-D-02.75-01-F-N RoHS : Compliant |
| 0 | ||
| TCSD-08-D-02.75-01-F-P14-R | Samtec Inc | Cable Assembly Flat Ribbon 0.069m 28AWG 16 POS IDC Connector to 16 POS IDC Connector SKT-SKT IDT-IDT Bulk RoHS : Compliant |
| 0 | ||
| TCSD-10-D-09.75-01-F-N-P01 | Samtec Inc | IDC SOCKET CABLE ASSEMBLI RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 7501K15 | Eaton Corporation | Toggle Switch,SPST,ON-NONE-OFF,General Purpose,15A,125VAC,10A,250VAC,.250" QC RoHS : Compliant |
| 50 | |
| STEK750/128 | HGST a Western Digital Company | 128MB SimpleTech 144-pin PC100 SDRAM Memory for Xerox Tektronix Phaser 750 Printer |
| 2 | ||
1407501![]() | Phoenix Contact | Network cable, CAT5, Str M12 M 4p to Str RJ45 M 8p4c, 4wire 5m, PVC Green, NBC-MSD/ 5,0-93B/R4AC SCO RoHS : Compliant |
| 0 | ||
| 750156 | Pilz International | Pilz 750156 Sigma Two Hand Relay Type Iiia 48-240V, 3 NO 1 NC, PNOZ Series |
| 0 | ||
| ACC750-1T48-PC | Bel Power Solutions | Modular Power Supply, In 85-305VAC, Out 48VDC 15.6A 750W, Nat Conv, Punch COVER |
| 0 | ||
| ESS010W-0750-12 | Energy Recovery Products | LED Power Supplies 120-277 Vac, 87% eff., Rectangular Plastic Case, Forward/Reverse Phase & 0-10V dimming, 1-100% dim range, 10.5 W max, 250 mA Iout, 42 V max Vout RoHS : Compliant |
| 0 | ||
| 3350B700275010 | HARTING Technology Group | Specialized Cables Han Q4/2 CA 7G2,5 m/-st/-PVC,1m RoHS : Compliant |
| 0 | ||
| AXG952275012 | Axiom Manufacturing | XCVR SFP CISCO COMP DWDM-SFP-5012 TAA |
| 0 | ||
| 88975011 | Crouzet | Programmable Logic Controllers - PLCs Millenium Evo Logic Controller Ethernet, Xbp24-E, Blind, 24 I/O, 24 Vdc |
| 0 | ||
| 89750160 | Crouzet | Adapter, SA12-EC12, Screw, CSA Certified, CEI and EN Approved |
| 0 | ||
| 89750180 | Crouzet | Industrial Temperature Sensors M3 SONDE CTN ENTER 1PC TO GET 10PCS |
| 0 | ||
| RSP-750-12 | Mean Well | Switching Power Supplies 750W 12V 62.5A, PFC, Forced air, Program Vout/CC, DC OK, Adj Output, Enclosed, Input: 90 ~ 264 VAC, 127 ~ 370 VDC RoHS : Compliant |
| 0 | ||
| V12H775010 | Seiko Epson Corporation | REPLACEMENT PEN TIP HARD FOR BRIGHTLINK 6XX SERIES |
| 0 | ||
| MCC750-1T24-PC | Bel Power Solutions | Modular Power Supply, In 85-305VAC; Out 24VDC 31.2A 750W, PERFORATED COVER, Nat Conv |
| 0 | ||
| MCC750-1T48 | Bel Power Solutions | Modular Power Supply, In 85-305VAC; Out 48VDC 15.6A 750W, Nat Conv, U CHASSIS |
| 0 | ||
![]() Pasternack Enterprises US | PE34750-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA male cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA male cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to male coax assembly, PE34750-12, can also be known as a reverse polarity SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE34750-12 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA male cable 12 inch length using RG142 coax. |
| 1,096 | |
| PE34750-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 18 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Male Cable 18 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA male cable 18 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to reverse polarity SMA male cable 18 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a male to male coax assembly, PE34750-18, can also be known as a reverse polarity SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE34750-18 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA male cable 18 inch length using RG142 coax. |
| 1,096 | ||
| PE3750-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to BNC Male Cable 12 Inch Length Using RG213 Coax., Radio frequency assembly N male to BNC male cable 12 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 12 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3750-12, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3750-12 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3750-12 can also be used in the other direction and will be BNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 12 inch length using RG213 coax. |
| 258 | ||
| PE7750-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 10 dB Fixed Attenuator 75 Ohm N-Type Male to 75 Ohm N-Type Female Brass Tri-Metal body rated 2 Watt DC to 4 GHz. PE7750-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7750-10 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7750-10 attenuator is rated for maximum frequency up to 4 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7750-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 13 | ||
| PE3C10750-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-18 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-18 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-18 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-18 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE7750-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 1 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 1 dB Fixed Attenuator 75 Ohm N-Type Male to 75 Ohm N-Type Female Brass Tri-Metal body rated 2 Watt DC to 4 GHz. PE7750-1 is a 1 dB fixed attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7750-1 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7750-1 attenuator is rated for maximum frequency up to 4 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 1 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7750-1 will ship the same business day as purchased from Pasternack’s production facility. This 1 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7501-20 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 14.5 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 20 dB, Step Type: Dial. 0 to 20 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 10.7 GHz to 14.5 GHz. PE7501-20 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a SMA female gender for connector 1 and a SMA female for connector 2. Our PE7501-20 variable attenuator has a maximum attenuation of 20 dB. This microwave variable attenuator has a frequency range of 10.7 GHz to 14.5 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts at the stated attenuation. This variable RF attenuator has a flat attenuation accuracy of 1.5 dB over operating frequency range and a maximum insertion loss of 0.5 dB. Our continuously variable attenuator has an overall length of 2 inches, width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 20 dB variable attenuator are in our downloadable PDF datasheet above. Our variable attenuator PE7501-20 is shipped the same day as purchased from Pasternack's facility. This attenuator is part of our RF, microwave and millimeter-wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE3C10750-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-12 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-12 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-12 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-12 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3W07501LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Female to SMC Plug Right Angle Cable Using RG174 Coax, LF Solder. PE3W07501LF is a BNC female to SMC plug right angle cable using RG174 coax. This Pasternack BNC female to SMC plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. BNC to SMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC to plug SMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07501LF BNC female to SMC plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3FCA750-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, LSZH Jacket-10M. Pasternack’s PE3FCA750-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA750-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA750-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W17501 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male to 4.3-10 Male Cable Using RG402 Coax. PE3W17501 is a SMA male to 4.3-10 male cable using RG402 coax. This Pasternack SMA male to 4.3-10 male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male SMA to male 4.3-10 cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17501 SMA male to 4.3-10 male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W07501 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Female to SMC Plug Right Angle Cable Using RG174 Coax. PE3W07501 is a BNC female to SMC plug right angle cable using RG174 coax. This Pasternack BNC female to SMC plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. BNC to SMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC to plug SMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07501 BNC female to SMC plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3C7501 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C0750-12 | Pasternack Enterprises |
| 0 | |||
| PE3FCA750-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, LSZH Jacket-1M. Pasternack’s PE3FCA750-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA750-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA750-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
![]() Venkel Ltd. | AGCR0805-RK-7501FT | VENKEL LTD | Auto Grade Resistor;0805;1/8W;�100PPM;7.5K;�1% RoHS : Compliant | 10,000 | ||
| CR1210-2W-7501FT | VENKEL LTD | Chip Resistor;1210;1/2W;7.5K;�1% RoHS : Compliant | 5,000 | |||
| TFCR0603-16W-C-7501FT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-7501FT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-7501CT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;7.5K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-7501DT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;7.5K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-7501FT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-7501DT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;7.5K;�0.5% RoHS : Compliant | 0 | |||
| AGCR0402-RK-7501DT | VENKEL LTD | Auto Grade Resistor;0402;1/8W;�100PPM;7.5K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TE-7501DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;7.5K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-7501FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-7501BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;7.5K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-ZZ-7501CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�15PPM;7.5K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-XN-7501FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;7.5K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XP-7501BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;7.5K;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | Y175010R1000F0L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.75W, 10.1ohm, 350V, 1% +/-Tol, 0.2ppm/Cel, Through Hole Mount | 11,358 | ||
| XLS204XD0750-11 | Broadcom Limited | 9,574 | ||||
| XLS108XD0750-11 | Broadcom Limited | 9,559 | ||||
| XLS018XD0750-11 | Broadcom Limited | 9,115 | ||||
V62/04675-01XE![]() | Texas Instruments | Bus Driver, LVT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 9,087 | |||
| VN750-12-E | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 1 Driver, 9A RoHS : Compliant | 8,771 | |||
V62/06675-01XE![]() | Texas Instruments | Comparator, 2 Func, 5000uV Offset-Max, 650ns Response Time, CMOS, PDSO8 RoHS : Compliant | 8,654 | |||
| XLS208WD0750-11 | Broadcom Limited | 8,092 | ||||
| XLS104XD0750-11 | Broadcom Limited | 8,017 | ||||
| XLS208XD0750-11 | Broadcom Limited | 5,373 | ||||
| XLS208SXD0750-11 | Broadcom Limited | 3,580 | ||||
| TMC57501TB10 | Texas Instruments | 3,536 | ||||
| XC3090-70PG175-0123 | AMD Xilinx | 2,217 | ||||
| WINT1206LF037501B | Tt Electronics Plc | Fixed Resistor, Thin Film, 0.33W, 7500ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 | 560 | |||
| WINT1206LF037501B3 | Tt Electronics Plc | Fixed Resistor, Thin Film, 0.33W, 7500ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 | 360 | |||
![]() Waytek, Inc. | AL-07-50-13-C | Advanced Cable Ties Inc | ACT AL-07-50-13-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 23,200 | |
| AL-07-50-12-C | Advanced Cable Ties Inc | ACT AL-07-50-12-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 20,500 | ||
| AL-07-50-11-C | Advanced Cable Ties Inc | ACT AL-07-50-11-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 9,900 | ||
| AL-07-50-1-C | Advanced Cable Ties Inc | ACT AL-07-50-1-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 8,900 | ||
| AL-07-50-14-C | Advanced Cable Ties Inc | ACT AL-07-50-14-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 3,200 | ||
![]() Win Source Electronics | IRF7501TRPBF | Infineon Technologies AG | MOSFET 2N-CH 20V 2.4A MICRO8 RoHS : Compliant |
| 31,997 | |
| IRF7501PBF | International Rectifier | Generation V Technology Ulrtra Low On-Resistance RoHS : Compliant |
| 30,370 | ||
| IRF7501TR | Infineon Technologies AG | MOSFET 2N-CH 20V 2.4A MICRO8 / Mosfet Array 2 N-Channel (Dual) 20V 2.4A 1.25W Surface Mount Micro8™ RoHS : Not Compliant |
| 29,170 | ||
| MAX17501GATB+T | Maxim Integrated Products | IC REG BUCK ADJ 0.5A SYNC 10TDFN RoHS : Compliant |
| 15,000 | ||
| QCA-8075-0-108DRQFN-TR-01-0 | Qualcomm | QCA8075 (001-0), 108DRQFN, DIGIT |
| 9,926 | ||
| HDSP-7501-CDZ00 | Broadcom Limited | DISPLAY 7-SEG 0.3" SGL RED 10DIP / Display Modules - LED Character and Numeric Red 7-Segment 1 Character Common Anode 2.05V 20mA 0.500" H x 0.300" W x 0.240" D (12.70mm x 7.62mm x 6.09mm) 10-DIP (0.200", 5.08mm) |
| 7,860 | ||
| HDSP-7501-CD000 | Broadcom Limited | LED 7-SEG 7.6MM CA HE RED / Display Segmented Module 1DIGIT 8LED Hi-Eff. Red CA 10-Pin DIP Module Tube RoHS : Compliant |
| 7,810 | ||
| HDSP-7501 | Broadcom Limited | LED 7-SEG 7.6MM CA HE RED RoHS : Compliant |
| 6,475 | ||
CSD17501Q5A![]() | Texas Instruments | MOSFET N-CH 30V 100A 8SON RoHS : Compliant |
| 5,715 | ||
| SKY85750-11 | Skyworks Solutions Inc | FEM, 5.0 GHz, +18.5dBm, 30 dB transmit, 13.5 dB receive, 16-pin, 3 x 3 mm RoHS : Compliant |
| 3,446 | ||
| MAX17501EATB+ | Maxim Integrated Products | IC REG BUCK 3.3V 500MA 10TDFN RoHS : Compliant |
| 3,000 | ||
| MAX17501EATB+T | Maxim Integrated Products | IC REG BUCK 3.3V 500MA 10TDFN RoHS : Compliant |
| 3,000 | ||
| MIC37501-1.8WR | Microchip Technology Inc | 5A, Low Voltage μCap LDO Regulator | IC REG LINEAR 1.8V 5A SPAK-7 RoHS : Compliant |
| 2,763 | ||
| MIC37501-1.8WR TR | Micrel Inc |
| 2,520 | |||
| XLS108XD0750-11 | Broadcom Limited | XLS108 750MHZ NOMINAL 845BGP PRO / Microprocessor IC * |
| 1,877 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |