| Electronic Components Datasheet Search |
|
7510G-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 875105144008 | Wurth Elektronik | CAP ALUM POLY 220UF 20% 6.3V SMD RoHS : Compliant |
| 5,691 | |
| 875105144008 | Wurth Elektronik | CAP ALUM POLY 220UF 20% 6.3V SMD RoHS : Compliant |
| 5,691 | ||
| AC1206FR-07510RL | YAGEO Corporation | RES SMD 510 OHM 1% 1/4W 1206 RoHS : Compliant |
| 2,226 | ||
| AC1206FR-07510RL | YAGEO Corporation | RES SMD 510 OHM 1% 1/4W 1206 RoHS : Compliant |
| 2,211 | ||
| AC1206FR-07510RL | YAGEO Corporation | RES SMD 510 OHM 1% 1/4W 1206 RoHS : Compliant |
| 2,211 | ||
| MAX17510ATB/V+T | Maxim Integrated Products | IC REG LDO DDR 1OUT 10TDFN RoHS : Compliant |
| 1,055 | ||
| MAX17510ATB/V+T | Maxim Integrated Products | IC REG LDO DDR 1OUT 10TDFN RoHS : Compliant |
| 1,055 | ||
| MAX17510ATB/V+T | Maxim Integrated Products | IC REG LDO DDR 1OUT 10TDFN RoHS : Compliant |
| 1,055 | ||
| MQF326P25-13.3375-1.0/-40+85 | Mercury Electronic Ind Co Ltd | XTAL OSC TCXO 13.3375MHZ PECL |
| 250 | ||
| EMB 175 105 ME BL | Fischer Elektronik GmbH & Co KG | Box with heat sink & grooves |
| 50 | ||
| C7510T110Y | Bulgin | ILLUMINATED YELLOW WATERPROOF ON |
| 45 | ||
| EUCI-075105GBA | Delta Electronics Inc | LED DRVR CC AC-DC 1.05A 35~150V |
| 40 | ||
| ECI23S3.25-S-375-10.00-MP-MP-CL-00-00 | Helix Linear Technologies | Electric Cylinder |
| 10 | ||
| ECI23S3.25-S-375-10.00-FT-FT-SP-E500-00 | Helix Linear Technologies | Electric Cylinder |
| 10 | ||
| 7510 | Thomas & Betts | 3/4 INCH X 10 GRD ROD CU |
| 0 | ||
![]() Avnet Americas | RT1206BRD07510KL | YAGEO Corporation | SMD Chip Resistor, 510 kOhm, ? 0.1%, 250 mW, 1206 [3216 Metric], Thin Film - Tape and Reel (Alt: RT1206BRD07510KL) RoHS : Compliant |
| 75,000 | |
| AC1206FR-07510KL | YAGEO Corporation | SMD Chip Resistor, 510 kOhm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose - Tape and Reel (Alt: AC1206FR-07510KL) RoHS : Compliant |
| 10,000 | ||
| 0751.0062 | Schurter Electronic Components | Fuse Holder, Cartridge Fuse Clip, 1, 10 A, 500 VAC, 500 VDC, 5mm x 20mm, Through Hole - Boxed Product (Development Kits) (Alt: 0751.0062) RoHS : Compliant |
| 4,369 | ||
| 105-0751-001 | Bel Fuse | - Bag (Alt: 105-0751-001) RoHS : Compliant |
| 3,312 | ||
| MKT1817510064 | Vishay Intertechnologies | - Bulk (Alt: MKT1817510064) RoHS : Compliant |
| 2,607 | ||
| 15-97-5101 | Molex | Connector Housing, Receptacle, 10 Contacts, 2 Rows, 4.2 mm, 30067 Series, Polyester, Mini-Fit TPA - Bulk (Alt: 0015975101) RoHS : Compliant |
| 2,000 | ||
| 73475-101LF | Amphenol Corporation | Connector Accessories Housing Header Liquid Crystal Polymer Natural - Bag (Alt: 73475-101LF) RoHS : Compliant |
| 1,000 | ||
| 28B0375-100 | Qnity Laird | Ferrite Core, Cylindrical, 14.48 mm Length, 5.08 mm ID, 9.53 mm OD - Bulk (Alt: 28B0375-100) RoHS : Compliant |
| 947 | ||
| 0751.0052 | Schurter Electronic Components | Fuse Holder, Cartridge Fuse Clip, 1, 10 A, 500 VAC, 500 VDC, 5mm x 20mm, Through Hole - Boxed Product (Development Kits) (Alt: 0751.0052) RoHS : Compliant |
| 889 | ||
| MKT1817510065 | Vishay Intertechnologies | - Bulk (Alt: MKT1817510065) RoHS : Compliant |
| 400 | ||
| RNX07510M0FHEL | Vishay Intertechnologies | Res Metal Oxide 10M Ohm 1% 2W ?50ppm/?C Conformal Axial Thru-Hole Lacer Pack - Bulk (Alt: RNX07510M0FHEL) RoHS : Compliant |
| 100 | ||
| 44475-1021 | Molex | PCB Receptacle, 10 Contacts, 2 Rows, 4.2mm, Tin, 11A, Female Receptacle, THT, Straight, Copper Alloy - Trays (Alt: 0444751021) RoHS : Compliant |
| 31 | ||
| ATT-0275-10-SMA-02 | Bel Fuse | Attenuator 18GHz 10dB SMA Plug/SMA Jack - Bulk (Alt: ATT-0275-10-SMA-02) RoHS : Not Compliant | 22 | |||
| 3975-106-1415 | Conesys | 1415S - Bulk (Alt: 3975-106-1415) RoHS : Compliant |
| 22 | ||
| 3975-107-1212 | Conesys | 1212S - Bulk (Alt: 3975-107-1212) RoHS : Compliant |
| 5 | ||
![]() Newark | 221751-0121 | Molex | CONNECTOR, R-A HDR, 24POS, 3ROW, THT; RoHS : Compliant |
| 950 | |
| D01475-100 | Farnell / Duratool | SPACER, PCB, ROUND, NYLON 6.6, 5X5MM; RoHS : Compliant |
| 856 | ||
| 875105844001 | Wurth Elektronik | CAP, 5.6UF, 63V, ALU ELEC SMD, POLYMER; RoHS : Compliant |
| 674 | ||
| 875105844001 | Wurth Elektronik | CAP, 5.6UF, 63V, ALU ELEC SMD, POLYMER; RoHS : Compliant |
| 674 | ||
| 691317510006 | Wurth Elektronik | TERMINAL BLOCK, R/A HEADER, 6POS, TH; RoHS : Compliant |
| 201 | ||
| 217510-2123 | Molex | CABLE ASSY, CRIMP SKT-CRIMP SKT, 225MM; Connector to Connector:L1NK 250 Crimp Terminal Socket to L1NK 250 Crimp Terminal Socket; Cable Length - Imperial:8.9"; Cable Length - Metric:225mm; Product Range:L1NK 250 OTS 217510 Series RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 217510-2124 | Molex | CABLE ASSY, CRIMP SKT-CRIMP SKT, 300MM; Connector to Connector:L1NK 250 Crimp Terminal Socket to L1NK 250 Crimp Terminal Socket; Cable Length - Imperial:11.8"; Cable Length - Metric:300mm; Product Range:L1NK 250 OTS 217510 Series RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 217510-2121 | Molex | CABLE ASSY, CRIMP SKT-CRIMP SKT, 75MM; Connector to Connector:L1NK 250 Crimp Terminal Socket to L1NK 250 Crimp Terminal Socket; Cable Length - Imperial:2.95"; Cable Length - Metric:75mm; Product Range:L1NK 250 OTS 217510 Series RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 1277510000 | Weidmüller Interface GmbH & Co. KG | TERMINAL BLOCK, PLUGGABLE, 12POS, 16AWG; RoHS : Compliant |
| 55 | ||
| 9037510000 | Weidmüller Interface GmbH & Co. KG | WIRE FERRULE, TWIN WIRE, 14AWG, 2.5MM²; RoHS : Compliant |
| 53 | ||
| 73475-101LF | Amphenol Communications Solutions | HEADER HOUSING, 12MM; Accessory Type:Header Housing; For Use With:Connectors; Product Range:Metral Series RoHS Compliant: Yes RoHS : Compliant |
| 53 | ||
| C7510T110Y | Bulgin | ROCKER SWITCH, SPST-NO, 3A/250VAC, PANEL; RoHS : Compliant |
| 50 | ||
| C7510T110Y | Bulgin | ROCKER SWITCH, SPST-NO, 3A/250VAC, PANEL; Switch Operation:On-Off; Contact Configuration:SPST-NO; Illumination:Illuminated; Switch Mounting:Panel, Snap-In; Actuator / Cap Colour:Yellow; Product Range:7500 Series RoHS Compliant: Yes RoHS : Compliant |
| 50 | ||
| 751016 | Pilz International | SETSPRING TERMINAL, CONTROLLER; RoHS : Compliant |
| 7 | ||
| TXM 075-105 | Traco Power | POWER SUPPLY, AC/DC, 75W, 5V, 12A; RoHS : Compliant |
| 3 | ||
![]() Analog Devices Inc | MAX17510ATC/V+T | Analog Devices Inc | DDR LDO; (1.5A min) RoHS : Compliant |
| 10,000 | |
| MAX17510ATC/V+ | Analog Devices Inc | DDR LDO; (1.5A min) RoHS : Compliant |
| 2,066 | ||
| MAX17510ATB+T | Analog Devices Inc | Low-Voltage DDR Linear Regulat RoHS : Compliant |
| 1,447 | ||
| MAX17510ATB/V+T | Analog Devices Inc | Low-Voltage DDR Linear Regulat RoHS : Compliant |
| 211 | ||
| 117510-HMC609LC4 | Analog Devices Inc | HMC609LC4 Evaluation PCB |
| 8 | ||
| MAX17510ATB+ | Analog Devices Inc | Low-Voltage DDR Linear Regulat RoHS : Compliant | 0 | |||
| MAX17510ATB/V+ | Analog Devices Inc | Low-Voltage DDR Linear Regulat RoHS : Compliant | 0 | |||
![]() RS | 0751.0110 | Schurter Electronic Components | FUSE CLIP, 5X20MM, 500V, 10A, PCB, SOLDER THT, KICKED, TIN/BRASS, OG CLIP SERIES RoHS : Compliant |
| 711 | |
| 1175-10-S-12 | RAF Electronic Hardware | ROUND SPACER;5/16 RD X 1 1/2 X .192 ID |
| 299 | ||
| PT06A-8-2P(SR) (71-150751-02P) | Amphenol Industrial Operations | PLUG BAYONET LOCK CLASS A GENERAL PURPOSE STRAIGHT PLUG 8 PIN 8-2 2 5 A |
| 44 | ||
| PFC375-1024G | Bel Power Solutions | POWER SUPPLY, AC-DC, ENCLOSED, 24V,15A, 375W, PFC |
| 24 | ||
| PFC375-1024F | Bel Power Solutions | POWER SUPPLY, AC-DC, 24V, 15A, 85-264V IN, ENCLOSED, 360W, PFC375 SERIES RoHS : Compliant |
| 23 | ||
| 64751075 (647.510.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 72,LEDSTEADY, LED BLINK, TWINLIGHT,24V AC/DC, BLUE |
| 21 | ||
| 2454757 (25532291) (SCIA-100075-100RS) | RS Pro | SCREW, 10/24 X 3/4 SOCKET HEAD CAP, PLAIN FINISH |
| 18 | ||
| 2451576 (25532834) (FHSFIA0370075-100RS) | RS Pro | SCREW, 3/8-24 X 3/4 FLAT SOCKET CAP, PLAIN FINISH |
| 5 | ||
| 2454996 (25532644) (SSCIA0-80075-100RS) | RS Pro | SCREW, 8/32 X 3/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 3 | ||
| 2451570 (25532828) (FHSFIA0310075-100RS) | RS Pro | SCREW, 5/16-24 X 3/4 FLAT SOCKET CAP, PLAIN FINISH |
| 3 | ||
| UL PCM 175/100 G (6416321) | FIBOX | PC ENCLOSURE, 7" WIDE X 4" DEEP X 7" HIGH, GRAY COVER, UL 508 |
| 2 | ||
| 2453408 (25534318) (HCI810001751-010RS) | RS Pro | 1-8 X 1 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, COARSE |
| 2 | ||
| 7510 | ABB Group | COPPER CLAD, POINTED GROUND ROD, 3/4" X10 |
| 1 | ||
| UL PC 175/100 HT (6411921) | FIBOX | PC ENCLOSURE, 7" WIDE X 4" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 1 | ||
| UL PCM 175/100 XT (6416940) | FIBOX | PC ENCLOSURE, 7" WIDE X 4" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 1 | ||
![]() Microchip Technology Inc | UM7510D | Microchip Technology Inc | Si PPIN Hermetic Stud, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | ||
| PIC7510 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UM7510B | Microchip Technology Inc | Si PPIN Hermetic Glass Axial, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| UM7510SM | Microchip Technology Inc | Si PPIN Hermetic MELF, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| AT8375102-ZZ12TV01 | Microchip Technology Inc | CONTINENTAL FLEX I/O PROD PKG, VQFN, Projected EOL: 2051-08-03 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-2050-BEJ-1075-100M000000 | Microchip Technology Inc | OX-2050-BEJ-1075-100M000000, Projected EOL: 2050-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-2050-BEJ-2075-100M000000 | Microchip Technology Inc | OX-2050-BEJ-2075-100M000000, Projected EOL: 2050-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-2050-BEE-2075-100M000000 | Microchip Technology Inc | OX-2050-BEE-2075-100M000000, Projected EOL: 2050-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-3050-BEE-2075-100M000000 | Microchip Technology Inc | OX-3050-BEE-2075-100M000000, Projected EOL: 2050-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| EX-4002-EEE-1075-10M0000000 | Microchip Technology Inc | EX-4002-EEE-1075-10M0000000, Projected EOL: 2050-11-17 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 4511-175-100-2 | Seastrom Mfg | 190 | |||
| NAS75-10-016 | NAS Bearings/Bushings | 100 | ||||
| 15275-101 | Staffall | 100 | ||||
| NAS75-10-053 | NAS Bearings/Bushings | 82 | ||||
| 1175-10-SS-20 | RAF Electronic Hardware | 79 | ||||
| 4575-1032-SS | RAF Electronic Hardware | 53 | ||||
| POS-8751000S1 | MISC. INDUSTRIAL CONNECTORS | 30 | ||||
| 0G751-.0062 | MISCELLANEOUS | 29 | ||||
| 1275-102 | HH Smith | 15 | ||||
| 69-258775-100-8-01 | MISCELLANEOUS | 10 | ||||
| 75107 | WASHERS | 8 | ||||
| 1275-101 | HH Smith | 3 | ||||
| NAS75-10-026 | NAS Bearings/Bushings | 2 | ||||
| SNS512AF37510005 | MISCELLANEOUS | 1 | ||||
| MS27510B10CL | MS Connectors | 1 | ||||
![]() Rochester Electronics | BUK7510-55AL,127![]() | NXP Semiconductors | Power Field-Effect Transistor, 75A, 55V, 0.01ohm, N-Channel, MOSFET, TO-220AB RoHS : Compliant |
| 4,769 | |
BUK9675-100A,118![]() | Nexperia | MOSFET N-Channel 100V 23A (Ta) TO-263-3 T/R RoHS : Compliant |
| 49,600 | ||
| QT7510X | onsemi | RF Transceiver, 5x5, 5 GHz, WiFi 6 RoHS : Not Compliant |
| 11 | ||
| PX7510EDSGCS11981XUMA1 | Infineon Technologies AG | IFX Primarion Cntrller RoHS : Compliant |
| 2,000 | ||
| PX7510EISGCS1352901XUMA1 | Infineon Technologies AG | IFX Primarion Cntrller RoHS : Compliant |
| 3,698 | ||
| ADV7510BSTZ-P | Analog Devices Inc | Consumer IC RoHS : Compliant |
| 1 | ||
| SW7510EQ | Analog Devices Inc | Quad SPST JFET Analog Switch RoHS : Not Compliant |
| 512 | ||
| SN75107BNS | Texas Instruments | SN75107B Dual Line Receiver RoHS : Compliant |
| 9,250 | ||
SN75107BD![]() | Texas Instruments | IC INTERFACE Receiver ±4.75V - ±5.25V 14-SOIC Tube RoHS : Compliant |
| 29,775 | ||
SN75107AN![]() | Texas Instruments | IC INTERFACE Receiver ±4.75V - ±5.25V 14-DIP Tube RoHS : Compliant |
| 4,931 | ||
5962-9751002QPA![]() | Texas Instruments | Dual marked (TLV2432AMJGB) RoHS : Not Compliant |
| 50 | ||
TPS75105YFFT![]() | Texas Instruments | LED Driver ICs Linear 25mA 9-BGA T/R RoHS : Compliant |
| 3,000 | ||
MPC17510EJR2![]() | Freescale Semiconductor | 1.2 A 15 V H-Bridge Motor Driver IC RoHS : Compliant |
| 2 | ||
| RHRG75100 | Harris Semiconductor | Rectifier Diode, Avalanche, 75A, 1000V RoHS : Not Compliant |
| 750 | ||
| DS75108M | National Semiconductor Corporation | Line Receiver, 1 Func, 2 Rcvr, BIPolar, PDSO14 RoHS : Not Compliant |
| 3,440 | ||
![]() Sager | 7510 | ABB Group | Thomas & Betts |
| 0 | |
| AW-50-03-G-D-175-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-10-05-F-D-575-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-12-05-L-D-575-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-16-04-F-D-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| FW-20-05-G-D-375-100-A | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-20-05-L-D-575-100-A-P | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-20-05-L-D-575-100-P | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-22-05-L-D-475-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-25-05-L-D-575-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-30-05-F-D-575-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-32-05-F-D-575-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-50-05-L-D-375-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-04-03-L-D-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| FW-04-05-G-D-575-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | 53375-1010 | Molex | Connector: wire-board; socket; male; PIN: 10; Inom: 3A; 250V; UL94V-0 RoHS : Compliant |
| 78,500 | |
| 43375-1001 | Molex | Contact; female; SABRE; tinned; 18AWG; cut from reel; crimped; 18A RoHS : Compliant |
| 2,672 | ||
| 2675102002 | Fair-Rite Products Corp | Ferrite: sleeve; 75; -55÷90°C; 25.9x12.8x28.6mm RoHS : Compliant |
| 414 | ||
| 10034475-101LF | Amphenol Corporation | Connector: DIN 41612; socket; PIN: 150; angled; Press-Fit; UL94V-0 |
| 140 | ||
| 237510M | KING TONY | Socket: Torx®; socket spanner; E10; square; 1/4"; 24mm; short |
| 16 | ||
| 275.105-10120 | Electronicon | Discharge module; discharging PFC capacitors; 120kΩ; 600VAC |
| 10 | ||
| 0060100375100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 3.75mm; high speed steel; MAYKESTAG |
| 10 | ||
| 2751-00 | ELEKTRO-PLAST NASIELSK | Enclosure: multipurpose; X: 330mm; Y: 514mm; Z: 130mm; INDUSTRIAL |
| 7 | ||
| 0020202975100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 29.75mm; L: 296mm; high speed steel |
| 0 | ||
| 0060100275100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 2.75mm; high speed steel; MAYKESTAG |
| 0 | ||
| 05057751001 | Wera | Screwdriver bit; Phillips; PH2; 1/4"; Overall len: 25mm; 20pcs. |
| 0 | ||
| 1.675.1000.71 | HUMMEL AG | Cable gland; NPT1"; IP68; stainless steel; HSK-INOX |
| 0 | ||
| 1077751000 | Weidmüller Interface GmbH & Co. KG | 1077751000 RoHS : Compliant |
| 0 | ||
| 1127510000 | Weidmüller Interface GmbH & Co. KG | Relay: solid state; Ucoil: 5VDC; SPST-NO; Ucntrl: 5VDC; 1A; TOZ; IP20 RoHS : Compliant |
| 0 | ||
| 1771 075 10 | Technokabel SA | Wire; JZ; YSLCY-JZ; 7G1.5mm2; shielded,tinned copper braid; PVC |
| 0 | ||
![]() Ameya Holding Limited | RC0603JR-07510RL | YAGEO Corporation | RC Series 0603 0.1 W 510 Ohms 5% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 140,000 | ||
| RC0402FR-07510RL | YAGEO Corporation | RC Series 0402 0.063 W 510 Ohms ±1% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 100,000 | |||
| RC0402JR-07510RL | YAGEO Corporation | RC Series 0402 0.063 W 510 Ohms ±5% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 100,000 | |||
TPS75103YFFR![]() | Texas Instruments | IC LED DRIVER LINEAR 9-DSBGA RoHS : Compliant | 98,444 | |||
| RC0603FR-07510RL | YAGEO Corporation | RC Series 0603 0.1 W 510 Ohms 1% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 55,000 | |||
| RC0603FR-07510KL | YAGEO Corporation | RC Series 0603 0.1 W 510 kOhms 1% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 50,000 | |||
BUK9875-100A/CUX![]() | Nexperia | BUK9875 Series 100 V 75 mOhm N-Channel TrenchMOS Logic Level FET - SOT-223 RoHS : Compliant | 15,000 | |||
| RC0805FR-07510RL | YAGEO Corporation | RC Series 0805 0.125 W 510 Ohms 1% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 5,000 | |||
| BUK9875-100A/C2X | Nexperia | 4,000 | ||||
![]() ComSIT USA | PX05751063 | Bulgin | AVAILABLE EU | 18 | ||
| BQ27510DRZRG3 | Texas Instruments | AVAILABLE EU | 6,546 | |||
| RC0402FR07510KL | YAGEO Corporation | AVAILABLE EU | 6,090 | |||
| UVLED3751030 | Roithner LaserTechnik GmbH | AVAILABLE EU | 21 | |||
| 10034475101LF | Amphenol FCi | AVAILABLE EU | 601 | |||
| RC2010JK07510R | YAGEO Corporation | AVAILABLE EU | 825,891 | |||
| 8,75106E+11 | WUERTH ELEKTRONIK ITALIA SRL | AVAILABLE EU | 4,907 | |||
| RC0201FR07510KL | YAGEO Corporation | AVAILABLE EU | 359 | |||
| 8,75105E+11 | WUERTH ELEKTRONIK ITALIA SRL | AVAILABLE EU | 1,232 | |||
| 444751021 | Molex | AVAILABLE EU | 11 | |||
![]() ComSIT USA | BUK9575100A | NXP Semiconductors | N-CHANNEL TRENCHMOS LOGIC LEVEL FET Power Field-Effect Transistor, 23A I(D), 100V, 0.084ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 32,001 | ||
| AC0603FR07510RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/Thick Film, 0.1W, 510ohm, 75V, 1% +/-Tol, Surface Mount, 0603 RoHS : Compliant | 15,000 | |||
| RC1206FR07510RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 510ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 15,000 | |||
| 7510110 | Schurter Electronic Components | Fuse Holder Clip Cartridge 10A Through Hole RoHS : Compliant | 12,000 | |||
| BUK7275100A | NXP Semiconductors | N-CHANNEL TRENCHMOS STANDARD LEVEL FET Power Field-Effect Transistor, 21.7A I(D), 100V, 0.075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 11,810 | |||
| RC1206JR07510KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 510000ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| RC0805FR07510KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 510000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 10,000 | |||
| RC0805JR07510RL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.125W, 510ohm, 150V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,000 | |||
| BUK9275100A | NXP Semiconductors | N-CHANNEL TRENCHMOS LOGIC LEVEL FET Power Field-Effect Transistor, 21.7A I(D), 100V, 0.084ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 5,000 | |||
| AC1206JR07510KL | YAGEO Corporation | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 510000ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| AC1206FR07510RL | YAGEO Corporation | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 510ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| AF0402JR07510RL | YAGEO Corporation | Electronic Component RoHS : Not Compliant | 2,386 | |||
| BQ27510DRZTG3 | Texas Instruments | Fixed, 1 Channel, PDSO12 RoHS : Compliant | 500 | |||
| BQ27510DRZRG3 | Texas Instruments | Fixed, 1 Channel, PDSO12 RoHS : Compliant | 193 | |||
| 27510010300 | Electronic Component RoHS : Not Compliant | 72 | ||||
![]() Interstate Connecting Components | 75-107220-15S | Amphenol Aerospace | RECPT 75-107220-15S | 0 | ||
| MS27510A22A | Glenair Inc | PROTECTIVE COVERS | 0 | |||
| MS27510A8C | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| MS27510C22CL | Glenair Inc | PROTECTIVE COVERS RoHS : Compliant | 0 | |||
| MS27510C22CL | Amphenol PCD | MS27510C22CL | 0 | |||
| MS27510F10CL | Amphenol PCD | MS27510F10CL | 0 | |||
| MS27510F10CL | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| MS27510Z18A | Amphenol PCD | MS27510Z18A | 0 | |||
| 8751011-1 | Glenair Inc | 0 | ||||
| 97-5105-16S(0850) | Amphenol Industrial Operations | 5015 REC/PLG SHL#16S | 0 | |||
| 75-107218-11P | Amphenol Aerospace | RECPT 75-107218-11P | 0 | |||
| 73475-101LF | Amphenol FCi | 5 ROW HYBIRD HDR HOUSING RoHS : Compliant |
| 0 | ||
| BM4751-000 | TE Connectivity | CATJ-36D/1XU-3HL-GB02 | 0 | |||
| MS27510A14CM | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| MS27510A20C | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
![]() NexGen Digital | RC0201FR-07510KL | YAGEO Corporation | RoHS : Compliant | 11,417 | ||
![]() PEI Genesis | MS27510A22A | SOURIAU-SUNBANK |
| 0 | ||
| MS27510A8C | SOURIAU-SUNBANK |
| 0 | |||
| MS27510C22CL | SOURIAU-SUNBANK |
| 0 | |||
| MS27510C22CL | Amphenol PCD |
| 0 | |||
| MS27510F10CL | Amphenol PCD |
| 0 | |||
| MS27510F10CL | SOURIAU-SUNBANK |
| 0 | |||
| MS27510Z18A | Amphenol PCD |
| 0 | |||
| MS27510A14CM | SOURIAU-SUNBANK |
| 0 | |||
| MS27510A20C | SOURIAU-SUNBANK |
| 0 | |||
| MS27510B12CN | SOURIAU-SUNBANK |
| 0 | |||
| MS27510B12CN | Amphenol PCD |
| 0 | |||
| MS27510F18CN | Amphenol PCD |
| 0 | |||
| MS27510F18CN | SOURIAU-SUNBANK |
| 0 | |||
| MS27510T14CN | Amphenol PCD |
| 0 | |||
| MS27510Z16C | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | 10122975-101LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 24,156 | |
| TW-02-06-T-S-475-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 917 | ||
| TW-15-10-T-S-375-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 132 | ||
| TW-25-09-L-D-175-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 120 | ||
| ZW-10-13-T-S-875-100-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 102 | ||
| 73475-101LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 86 | ||
| C93-672751-09G | Amphenol Corporation | CONNECTOR |
| 74 | ||
| ZW-50-17-T-S-275-105 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 63 | ||
| ZW-30-11-G-D-575-100 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 49 | ||
| 751-0004-21-11-000 | TE Connectivity | DEUTSCH CONNECTOR 751-0004-21-11-000 |
| 17 | ||
| MS27510C22CL | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 10 | ||
| MS27510A22A | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 8 | ||
| 75-107022-7P | Amphenol Corporation | CONNECTOR |
| 5 | ||
| MS27510B16C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Not Compliant |
| 2 | ||
| MS27510A8A | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 2 | ||
![]() PUI | 12.87510 | 1,626 | ||||
| 1001-10C00B2+4075-10HE12N | 1,000 | |||||
| 8931-F075100UAA03SB | 160 | |||||
![]() Richardson RFPD | MGV-075-10-H27 | MACOM | GaAs Hyper abrupt Varactor Diodes RoHS : Compliant | 0 | ||
| SI5338A-B07510-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| R404751000 | Radiall | Conn Type N 0Hz to 6GHz 50Ohm ST RCP Gold Over Nic RoHS : Compliant |
| 0 | ||
| ASGP.1575.10B.4.A.01 | Taoglas Antenna Solutions | Antenna Patch 28dB Gain 1576.443MHz 7-Pin SMD RoHS : Compliant | 0 | |||
| HS75 100R F | Ohmite Mfg Co | Res Wirewound 100 Ohm 1% 24/75W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| R280751000 | Radiall | Contact PIN Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| DRAQ75-100-R | Eaton Corporation | Inductor Power Shielded Drum Core 9.59uH/38.34uH 2 RoHS : Compliant |
| 0 | ||
| K410751030HM0G079 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| K010751030HM0G105 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| MGV075-10 | MACOM | Diode VAR Cap Single 22V 2-Pin RoHS : Compliant | 0 | |||
| 87510-000 | TE Connectivity | PCB Mount Proximity Sensor RoHS : Compliant | 0 | |||
| 275-10-11 | Spectrum Control | Fixed Coaxial Attenuator 40GHz 10dB RoHS : Compliant | 0 | |||
| BD0922J75100A00 | TTM Technologies | BALUN TRANSFORMER RoHS : Compliant | 0 | |||
| K034751020HM0J143 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| U575100H0001Y030PG | TE Connectivity | Industrial Pressure Sensor 0psi to 30psi Gage 3-Pi RoHS : Not Compliant | 0 | |||
![]() Rutronik | RC0603FR-07510RL | YAGEO Corporation | RC0603 510R 1% 0,1W TK100 RoHS : Compliant |
| 1,620,000 | |
| AC0402FR-07510RL | YAGEO Corporation | AC0402 510R 1% 0,063W AUTOMO RoHS : Compliant |
| 1,000,000 | ||
| RC0402FR-07510RL | YAGEO Corporation | RC0402 510R 1% 0,063W TK100 RoHS : Compliant |
| 740,000 | ||
| RC0603JR-07510RL | YAGEO Corporation | RC0603 510R 5% 0,1W TK100 RoHS : Compliant |
| 205,000 | ||
| RC1206JR-07510RL | YAGEO Corporation | RC1206 510R 5% 0,25W TK100 RoHS : Compliant |
| 120,000 | ||
| RC0805FR-07510RL | YAGEO Corporation | RC0805 510R 1% 0,125W TK100 RoHS : Compliant |
| 75,000 | ||
| RC0201FR-07510KL | YAGEO Corporation | RC0201 510K 1% 0,05W TK200 RoHS : Compliant |
| 70,000 | ||
| AC0603JR-07510RL | YAGEO Corporation | AC0603 510R 5% 0,1W AUTOMO RoHS : Compliant |
| 70,000 | ||
| AC0402FR-07510KL | YAGEO Corporation | AC0402 510K 1% 0,063W AUTOMO RoHS : Compliant |
| 50,000 | ||
| AC0603FR-07510RL | YAGEO Corporation | AC0603 510R 1% 0,1W AUTOMO RoHS : Compliant |
| 20,000 | ||
| AF0402JR-07510RL | YAGEO Corporation | AS0402 510R 5% 0,0625W ANTISULFUR RoHS : Compliant |
| 20,000 | ||
| RT0402FRE07510RL | YAGEO Corporation | RT0402 510R 1% 0,0625W TK50 RoHS : Compliant |
| 20,000 | ||
| RC0201FR-07510RL | YAGEO Corporation | RC0201 510R 1% 0,05W TK200 RoHS : Compliant |
| 20,000 | ||
| RT0603DRE07510KL | YAGEO Corporation | RT0603 510K 0,5% 0,1W TK50 RoHS : Compliant |
| 5,000 | ||
| RT0805FRE07510KL | YAGEO Corporation | RT0805 510K 1% 0,125W TK50 RoHS : Compliant |
| 5,000 | ||
![]() Chip 1 Exchange | 10122975-101LF | Amphenol Corporation | INSTOCK | 55,120 | ||
| RC0603FR07510KL | INSTOCK | 50,000 | ||||
| 10133475-10001LF | Amphenol Corporation | INSTOCK | 12,720 | |||
AC0201FR-07510RL![]() | YAGEO Corporation | INSTOCK RoHS : Compliant | 12,025 | |||
| RC0402FR-07510RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 10,980 | |||
| 75102-0003 | Molex | INSTOCK RoHS : Compliant | 9,750 | |||
| 15-47-5100 | Molex | INSTOCK RoHS : Compliant | 7,969 | |||
| 75757-5101 | Molex | INSTOCK RoHS : Compliant | 7,659 | |||
| 75102-0078 | Molex | INSTOCK RoHS : Compliant | 2,921 | |||
| MMK7.5105J50K01L4 | Evox Rifa / KEMET | INSTOCK | 2,096 | |||
| RC1206FR-07510RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 1,763 | |||
| 190-17510-001 | INSTOCK | 350 | ||||
| 13751022 | DELCS | INSTOCK | 200 | |||
| WS-006(E7510) | WELL | INSTOCK | 36 | |||
AD7510DIJNZ![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 1 | |||
![]() Avnet Abacus | RC0402FR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-07510RL) RoHS : Compliant | 1,430,000 | ||
| RC0603FR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0603FR-07510RL) RoHS : Compliant | 135,000 | |||
| RC0201FR-07510KL | YAGEO Corporation | SMD Chip Resistor 510 kOhm 1 50 mW 0201 0603 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0201FR-07510KL) RoHS : Compliant | 130,000 | |||
| 433751001 | Molex | Contact Sabre 43375 Socket Crimp 14 AWG Tin Plated Contacts (Alt: 433751001) RoHS : Compliant | 87,000 | |||
| AC0805FR-07510KL | YAGEO Corporation | SMD Chip Resistor 510 kOhm 1 125 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: AC0805FR-07510KL) RoHS : Compliant | 75,000 | |||
| RC1206JR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 5 250 mW 1206 3216 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC1206JR-07510RL) RoHS : Compliant | 60,000 | |||
| AC0603FR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose AC Series - Tape and Reel (Alt: AC0603FR-07510RL) RoHS : Compliant | 55,000 | |||
| RC0603FR-07510KL | YAGEO Corporation | SMD Chip Resistor 510 kOhm 1 100 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0603FR-07510KL) RoHS : Compliant | 35,000 | |||
| RC0805FR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 1 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805FR-07510RL) RoHS : Compliant | 30,000 | |||
| RC0805JR-07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 5 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805JR-07510RL) RoHS : Compliant | 30,000 | |||
| RT0603FRE07510RL | YAGEO Corporation | SMD Chip Resistor 510 Ohm 1 100 mW 0603 1608 Metric Thin Film - Tape and Reel (Alt: RT0603FRE07510RL) RoHS : Compliant | 25,000 | |||
| RC0603JR-07510KL | YAGEO Corporation | SMD Chip Resistor 510 kOhm 5 100 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0603JR-07510KL) RoHS : Compliant | 15,000 | |||
| 0751.0110 | Schurter Electronic Components | Fuse Holder Cartridge Fuse Clip 1 10 A 500 VAC 500 VDC 5mm x 20mm Through Hole (Alt: 0751.0110) RoHS : Compliant | 13,000 | |||
| 28B0375-100 | Qnity Laird | Ferrite Core Cylindrical 1448 mm Length 508 mm ID 953 mm OD (Alt: 28B0375-100) RoHS : Compliant | 12,000 | |||
| BFC237075105 | Vishay Intertechnologies | General Purpose Film Capacitor Metallized PET Radial Box 2 Pin 1 uF 10 40 V 63 V - Tape and Reel (Alt: BFC237075105) RoHS : Compliant | 6,750 | |||
![]() Avnet Asia | 10135175-10110LF | Amphenol Corporation | Conn Housing PL 10 POS 1.5mm ST Cable Mount Bag (Alt: 10135175-10110LF) RoHS : Compliant |
| 70,000 | |
| 2-604751-0 | TE Connectivity | (Alt: 2-604751-0) RoHS : Compliant |
| 5,000 | ||
| 10179075-101JLF | Amphenol Corporation | (Alt: 10179075-101JLF) RoHS : Compliant |
| 32 | ||
PSMN075-100MSEX![]() | Nexperia | Power MOSFET, N Channel, 100 V, 18 A, 0.057 ohm, LFPAK33, Surface Mount (Alt: PSMN075-100MSEX) RoHS : Compliant | 0 | |||
| 0751.0110 | Schurter Electronic Components | Fuse Holder, Cartridge Fuse Clip, 1, 10 A, 500 VAC, 500 VDC, 5mm x 20mm, Through Hole (Alt: 0751.0110) RoHS : Compliant | 0 | |||
BUK9675-100A,118![]() | Nexperia | Trans MOSFET N-CH 100V 23A 3-Pin(2+Tab) D2PAK T/R (Alt: BUK9675-100A,118) RoHS : Compliant | 0 | |||
| 0533751010 | Molex | Conn Shrouded Header HDR 10 POS 2.5mm Solder ST Thru-Hole Bag (Alt: 0533751010) RoHS : Compliant | 0 | |||
| 0751.0062 | Schurter Electronic Components | Fuse Holder, Cartridge Fuse Clip, 1, 10 A, 500 VAC, 500 VDC, 5mm x 20mm, Through Hole (Alt: 0751.0062) RoHS : Compliant | 0 | |||
| 0751.0099 | Schurter Electronic Components | (Alt: 0751.0099) RoHS : Compliant | 0 | |||
| 0751.0505 | Schurter Electronic Components | Fuse Holder, Cartridge Fuse Clip, 1, 32 A, 1.5 kV AC, 1.5 kV DC, 10.3mm x 38mm, 10.3mm x 85mmm (Alt: 0751.0505) RoHS : Compliant | 0 | |||
| 011-7510-503 | Amphenol Corporation | BUSHING, END, POLARIZING (Alt: 011-7510-503) RoHS : Compliant | 0 | |||
| 175101-10-M10 | Amphenol Corporation | RF / Coaxial Cable Assembly, 32.8ft, 10m, Times LMR-400, N-Type Plug, N-Type Plug, 50 ohm (Alt: 175101-10-M10) RoHS : Compliant | 0 | |||
BUK9875-100A/CUX![]() | Nexperia | Power MOSFET, N Channel, 100 V, 7 A, 0.072 ohm, SOT-223, Surface Mount (Alt: BUK9875-100A/CUX) RoHS : Compliant | 0 | |||
| MKT1817510064 | Vishay Intertechnologies | (Alt: MKT1817510064) RoHS : Compliant | 0 | |||
| RMB07510R00JS14 | Vishay Intertechnologies | (Alt: RMB07510R00JS14) RoHS : Compliant | 0 | |||
![]() Avnet Silica | XR75100EL-F | MaxLinear Inc | DC DC Controller 55 V to 40 V 1 Output 800 kHz 16 Pins QFNEP (Alt: XR75100EL-F) RoHS : Compliant | 490 | ||
| HA7-5102-2 | Renesas Electronics Corporation | (Alt: HA7-5102-2) RoHS : Not Compliant | 0 | |||
| BU97510CKV-ME2 | ROHM Semiconductor | (Alt: BU97510CKV-ME2) RoHS : Compliant | 0 | |||
PSMN075-100MSEX![]() | Nexperia | Power MOSFET N Channel 100 V 18 A 0057 ohm LFPAK33 Surface Mount (Alt: PSMN075-100MSEX) RoHS : Compliant | 0 | |||
BUK9675-100A,118![]() | Nexperia | Trans MOSFET NCH 100V 23A 3Pin2Tab D2PAK TR (Alt: BUK9675-100A,118) RoHS : Compliant | 0 | |||
| OX-1750-BEE-1075-100M000000 | Microchip Technology Inc | (Alt: OX-1750-BEE-1075-100M000000) RoHS : Compliant | 0 | |||
| OX-2050-BEJ-1075-100M000000 | Microchip Technology Inc | (Alt: OX-2050-BEJ-1075-100M000000) RoHS : Compliant | 0 | |||
| OX-2050-BEJ-2075-100M000000 | Microchip Technology Inc | (Alt: OX-2050-BEJ-2075-100M000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | HBU75-108 | Sinpro Electronics Co Inc | 3 years warranty. |
| 0 | |
| HBU75-105 | Sinpro Electronics Co Inc | 3 years warranty. |
| 0 | ||
![]() DB Roberts | 4675-1032-B | RAF Electronic Hardware | BRASS-HEX M/F STANDOFF | 0 | ||
| 1007510000VR | Essentra Components | 0 | ||||
| SC037510B | Essentra Components | ROUND END CAPEPDM BLACK | 0 | |||
| 2175-1032-B | RAF Electronic Hardware | 0 | ||||
| 1775-1032-SS | RAF Electronic Hardware | 0 | ||||
| 13RS187510 | Essentra Components | ROUND SPACER, .250 ID, 1.860 O | 0 | |||
| 27XT3751000 | Essentra Components | FIR TREE RIVET, .375 HOLE, .06 | 0 | |||
| 4075-1032-A | RAF Electronic Hardware | ROUND MALE-FEMALE STANDOFF | 0 | |||
| 4575-1032-SS | RAF Electronic Hardware | 4575-1032-SS STAND SS M-F STANDOFF | 0 | |||
| SPL57510D | Spiralock | M12X1.75 SPL 3SP MP P TiN | 0 | |||
| F7-510 | Southco | 0 | ||||
| 4075-1032-N | RAF Electronic Hardware | 0 | ||||
| 1175-10-SS-20 | RAF Electronic Hardware | 0 | ||||
| 4575-1032-832-SS | RAF Electronic Hardware | 0 | ||||
| SC037510 | Essentra Components | ROUND END CAPSILICONE YELLOW | 0 | |||
![]() EBV Elektronik | HCPL-7510-300E | Broadcom Limited | Optocoupler Single 8Pin SMD DIP Tube (Alt: HCPL-7510-300E) RoHS : Compliant | 37,500 | ||
| HCPL-7510-000E | Broadcom Limited | Optocoupler Single 8Pin DIP Tube (Alt: HCPL-7510-000E) RoHS : Compliant | 650 | |||
| HCPL-7510-560E | Broadcom Limited | OptoCoupler 1CH 8Pin PDIP SMD TR (Alt: HCPL-7510-560E) RoHS : Compliant | 0 | |||
| HCPL-7510-060E | Broadcom Limited | Optocoupler Single 8Pin DIP Tube (Alt: HCPL-7510-060E) RoHS : Compliant | 0 | |||
| HCPL-7510-500E | Broadcom Limited | Isolation Amplifier 375 kV 45V to 55V DIP 8 Pins 100 kHz (Alt: HCPL-7510-500E) RoHS : Compliant | 0 | |||
| HCPL-7510-56RE | Broadcom Limited | Avago Optocoupler (Alt: HCPL-7510-56RE) RoHS : Compliant | 0 | |||
| HCPL-7510-360E | Broadcom Limited | OptoCoupler 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7510-360E) RoHS : Compliant | 0 | |||
| EX-4002-EEE-1075-10M0000000 | Microchip Technology Inc | (Alt: EX-4002-EEE-1075-10M0000000) RoHS : Compliant | 0 | |||
![]() Flip Electronics | XR75100EL-F | MaxLinear Inc | Stock RoHS : Compliant | 159,000 | ||
| XR75100ELTR-F | MaxLinear Inc | Stock, Ship Today RoHS : Compliant | 159,000 | |||
| QT7510X | onsemi | Stock, Ship Today | 82,800 | |||
| BD17510STU | onsemi | Stock, Ship Today RoHS : Compliant | 7,680 | |||
| PX7510EDSGCS09024XUMA1 | Infineon Technologies AG | Stock, Ship Today | 4,000 | |||
![]() Maritex | 1-175102-1 | TE Connectivity | Rectangular Connector Contacts; 1-175102-1; TE CONNECTIVITY; Tin; Crimp; Cable; Socket RoHS : Compliant |
| 100,023 | |
| RC0603JR-07510KL | YAGEO Corporation | Chip Resistor; SMD; 0603; 510K; 5%; 1/10W RoHS : Compliant |
| 70,676 | ||
| 0751.0052 | Schurter Electronic Components | Fuse holders; 0751.0052; PCB, Through Hole; 5 mm; PC Pin; -40 �C RoHS : Compliant |
| 26,000 | ||
| RC0402FR-07510RL | YAGEO Corporation | Resistor; Thick Film; 0402; 510R; 1%; 1/16W RoHS : Compliant |
| 8,870 | ||
| CR-03JL7--510K | Viking Technology | Chip Resistor; SMD; 0603; 510K; 5%; 1/10W |
| 5,000 | ||
| 0751.0056 | Schurter Electronic Components | Fuse holders; 0751.0056; Horizontal, PCB, Through Hole; 10.5 mm; PC Pin; -40 �C RoHS : Compliant |
| 2,000 | ||
| 0751.0062 | Schurter Electronic Components | Fuse holders; 0751.0062; PCB, Through Hole; 6 mm; PC Pin; -40 �C RoHS : Compliant |
| 2,000 | ||
| 0751.0110 | Schurter Electronic Components | Fuse holders; 0751.0110; Horizontal, PCB, Through Hole; PC Pin; -40 �C RoHS : Compliant |
| 1,990 | ||
| 0751.0505�� | Schurter Electronic Components | CSO fuse clip for 10.3 × 38 mm and 10.3 × 85 mm fuse links; PCB THT mounting; solder terminals; silver-plated contacts; 1500 VAC/VDC; 32 A; operating temperature -40…+155°C |
| 700 | ||
| 2EDGKA-7.5-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 7.50mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300V/15A TUV 400V/10A |
| 100 | ||
| 2EDGR-7.5-10P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 10-ways; male; R/A pin header; open type; UL 300V/15A; TUV:400V/20A |
| 100 | ||
| 2EDGV-7.5-10P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 10-ways; male; vertical pin header; open type; UL 300V/15A; TUV:400V/20A |
| 100 | ||
| 2EDGVC-7.5-10P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 10-ways; male; vertical pin header; closed type; UL 300V/15A; TUV:320V/20A |
| 100 | ||
| 2EDGK-7.5-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 7.50mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction same as plug-in direction; p.bronze contacts; brass cage; UL 300V/15A TUV 400V/20A |
| 70 | ||
| RC0603FR-07510RL | YAGEO Corporation | Chip Resistor; SMD; 0603; 510R; 1%; 1/10W RoHS : Compliant |
| 8 | ||
![]() Master Electronics | 7510 | Thomas & Betts | Copper Clad - Pointed Ground Rod - 3/4 inch x 10 feet. RoHS : Compliant |
| 0 | |
| AW-50-03-G-D-175-100 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| JW-04-04-T-S-475-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-10-05-F-D-575-100-A | Samtec Inc | Conn Board Stacker HDR 20 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-12-05-G-D-575-100-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-12-05-L-D-575-100-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-16-04-F-D-275-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-17-05-G-D-575-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-20-05-G-D-375-100-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-20-05-L-D-575-100-A-P | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-20-05-L-D-575-100-P | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-22-05-L-D-475-100 | Samtec Inc | Conn Board Stacker HDR 44 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| FW-25-05-L-D-575-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-30-05-F-D-575-100 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-32-05-F-D-575-100-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2275-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 39.3 inches. BNC Male to N Male Right Angle Cable 39.3 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to N male right angle cable 39.3 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N male right angle cable 39.3 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle N type cable connection on the other. Our BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This BNC to N type cable is a male to male coax assembly, PE3C2275-100CM, can also be known as a BNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C2275-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2275-100CM can also be used in the other direction and will be right angle N type male to BNC male cable assembly if the opposite connectivity is required. BNC plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male right angle cable 39.3 inch length using LMR-240 coax. |
| 1,675 | |
| PE3FCA175-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC UPC to ST UPC, SM OS2, 2.0mm Plenum, Yellow -10M. Pasternack’s PE3FCA175-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex SC/UPC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA175-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 43 | ||
| PEWAN075-10ELSF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 10 dBi gain, End Launch SMA Female connector. The PEWAN075-10ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with an SMA female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PEWAN075-10ELSF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 3.88 inches, a width of 1.51 inches, and a weight of 0.25 lbs. This WR-75 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 7 | ||
| PE7510-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 10 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 10 dB. The Pasternack PE7510-10 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 10 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE3WAN075-10SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 10 dBi Gain, SMA Female Connector with Weather Resistant Radome Cover. The PE3WAN075-10SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a weather-resistant radome cover and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with an SMA female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PE3WAN075-10SF waveguide horn antenna with a weather-resistant radome cover has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 3.88 inches, a width of 1.51 inches, and a weight of 0.27 lbs. This WR-75 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 6 | ||
| PE7510-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7510-2 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 2 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7510-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Stainless Steel Body Rated to 2 Watts Up to 50 GHz. PE7510-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7510-1 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 1 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7510-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PEWGCOV075-10 | Pasternack Enterprises | Key Specifications, Product Type: Horn Covers, Waveguide Size: WR-75, Body Material: Polymethacrylimide (PMI). Standard Gain Horn Radome Cover for PEWAN075-10 Horn Antenna. PEWGCOV075-10 is a radome cover for PEWAN075-10 10 dBi WR-75 Standard Gain Horn antenna. This waveguide antenna radome cover is made from high strength, thermally stable Polymethacrylimide (PMI). PMI offers a low Relative Permittivity (Dielectric Constant) at the high frequency ranges seen with microwave and millimeter wave components. This allows for minimal signal loss or attenuation over other materials. Increase your system capabilities with our PMI radome covers, designed to enhance the durability and longevity of standard gain horn antennas. Shielding against environmental elements, our radome covers ensure consistent signal integrity in any conditions. PEWGCOV075-10 has internal dimensions of 1.3 in by 1 in and will fit 10 dBi WR-75 standard gain horns. Pasternack offers a wide selection of high performance waveguide components available in stock and same-day shipping to customers worldwide. |
| 3 | ||
| PE3W15075-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Female to SMA Male Low Loss Cable 100 CM Length Using LMR-100A-UF Coax., Radio frequency assembly SMA female to SMA male low loss cable 100 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 100 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W15075-100CM can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15075-100CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3W15075-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15075-100CM can also be used in the other direction and will be a SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03175-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Female Bulkhead to SMA Male Right Angle Cable 100 cm Using PE-SR405FLJ Coax., Radio frequency assembly TNC female bulkhead to SMA male right angle cable 100 cm using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male right angle cable 100 cm using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle SMA cable connection on the other. Our TNC to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W03175-100CM, can also be known as a TNC jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W03175-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03175-100CM can also be used in the other direction and will be right angle SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male right angle cable 100 cm using PE-SR405FLJ coax. |
| 0 | ||
| PE1WAN075-10ELSF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 10 dBi gain, End Launch SMA Female Connector, Integrated Cage-Style Mount. The PE1WAN075-10ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with an SMA female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PE1WAN075-10ELSF waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 7.06 inches, a width of 4.33 inches, and a weight of 1.14 lbs. This WR-75 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE1WAN075-10NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 10 dBi gain, N Female Connector, Integrated Cage-Style Mount. The PE1WAN075-10NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with a type N female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PE1WAN075-10NF waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 7.06 inches, a width of 4.33 inches, and a weight of 1.13 lbs. This WR-75 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE1WAN075-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Waveguide Antenna, 10 GHz to 15 GHz Frequency Range, 10 dBi Gain, Integrated Cage-Style Mount. The PE1WAN075-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-75 standard gain horn antenna with a input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PE1WAN075-10 waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 7.06 inches, a width of 4.33 inches, and a weight of 0.96 lbs. This WR-75 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3M0175-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned N Male to N Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N female bulkhead low loss cable 100 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0175-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with type N connection on one end and type N connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly. PE3M0175-100CM can also be known as a temperature conditioned low loss type N plug to N type jack cable assembly and will be shipped the same day after it is purchased. type N plug to type N jack cable assembly PE3M0175-100CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N male to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0175-100CM can be used in the other direction and will be type N female to N type male cable assembly. Pasternack high reliability low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for same-day shipment worldwide. Variations of PE44825 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N female bulkhead low loss cable 100 cm length using PE-P142LL coax. |
| 0 | ||
| PE3C6375-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Fire Rated N Male to N Male Right Angle Low PIM Cable 100 cm Length Using SPF-500 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N male right angle low PIM cable 100 cm length using SPF-500 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N male right angle low PIM cable 100 cm length using SPF-500 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPO500-NM-LP N type to TC-SPO500-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPO500-NM-LP type N cable connection on one end and right angle TC-SPO500-NM-RA-LP N type cable connection on the other. Our low PIM TC-SPO500-NM-LP type N to right angle TC-SPO500-NM-RA-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-SPO500-NM-LP type N to TC-SPO500-NM-RA-LP N type cable is a male to male coax assembly, PE3C6375-100CM, can also be known as a low PIM TC-SPO500-NM-LP type N plug to right angle TC-SPO500-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPO500-NM-LP type N plug to TC-SPO500-NM-RA-LP N type plug cable assembly PE3C6375-100CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPO500-NM-LP N cable assembly is manufactured with TC-SPO500-NM-LP N type to right angle TC-SPO500-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPO500-NM-LP type N male to TC-SPO500-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6375-100CM can also be used in the other direction and will be right angle TC-SPO500-NM-RA-LP type N male to TC-SPO500-NM-LP N type male cable assembly if the opposite connectivity is required. Low PIM TC-SPO500-NM-LP type N plug to TC-SPO500-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPO500-NM-LP type N to TC-SPO500-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPO500-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male right angle low PIM cable 100 cm length using SPF-500 coax using Times Microwave parts. |
| 0 | ||
![]() TE Connectivity | 1-175102-1 | TE Connectivity | AMP CT CRIMP REC CONTACT Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 26 – 22 AWG Operating Voltage: 125 VAC Tin (Sn) Socket Pre-Tin 26 – 22 AWG | Connector Contact | Part Number: 1-175102-1 | Internal Number: 1-175102-1 | Alias Number: 1-0175102-1 | TE Connectivity RoHS : Compliant |
| 148,700 | |
| 1-2323751-0 | TE Connectivity | ASSY,HDR,VERT,GWT,NO-BOSS,DUAL ROW,EP2.5 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 1-2323751-0 | Internal Number: 1-2323751-0 | TE Connectivity RoHS : Compliant |
| 1,311 | ||
| SMW7510RJT | TE Connectivity | SMW 7W 510R 5% Taped Resistance Value: 510 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Smd Power Resistor: 7 Watt & 0.10-500 Ohm | 510 Ω Wire Wound Power Resistor 5 % | Part Number: SMW7510RJT | Internal Number: 9-2176459-0 | TE Connectivity RoHS : Compliant |
| 900 | ||
| RAY-101-7.5(100) | TE Connectivity | RAY-101-7.5(100) Primary Product Plating Material: Tin Primary Product Material: Copper Braid Coverage: 93 % Tin Copper 93 % | Cable Braid | Part Number: RAY-101-7.5(100) | Internal Number: A165103001 | Alias Number: 7-1200587-4 | TE Connectivity RoHS : Compliant |
| 343 | ||
| RAY-103-7.5(100) | TE Connectivity | RAY-103-7.5(100) Primary Product Plating Material: Nickel Primary Product Material: Copper Braid Coverage: 93 % Nickel Copper 93 % | Cable Braid | Part Number: RAY-103-7.5(100) | Internal Number: D209003001 | Alias Number: 4-1200588-2 | TE Connectivity RoHS : Compliant |
| 296 | ||
| HSC7510RJ | TE Connectivity | HSC75 10R 5% Resistance Value: 10 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 10 Ω Wire Wound 5 % Power Resistor | Part Number: HSC7510RJ | Internal Number: 2-1625995-0 | TE Connectivity RoHS : Compliant |
| 21 | ||
| THS75100RJ | TE Connectivity | THS75 100R 5% Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 100 Ω Wire Wound 5 % Power Resistor | Part Number: THS75100RJ | Internal Number: 1-1879363-1 | TE Connectivity RoHS : Compliant |
| 15 | ||
| HSC75100RJ | TE Connectivity | HSC75 100R 5% Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 100 Ω Wire Wound 5 % Power Resistor | Part Number: HSC75100RJ | Internal Number: 2-1625995-1 | TE Connectivity RoHS : Compliant |
| 14 | ||
| THS7510RJ | TE Connectivity | THS75 10R 5% Resistance Value: 10 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 10 Ω Wire Wound 5 % Power Resistor | Part Number: THS7510RJ | Internal Number: 1879363-6 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Teledyne HiRel | M38510/75101B2A![]() | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | ||
M38510/75101BCA![]() | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
M38510/75101BDA![]() | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
![]() Vyrian | 855-83-075-10-001101 | PRECI-DIP SSA | Board Connector, 75 Contact(s), 3 Row(s), Female, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 15,598 | ||
| 387007510 | Molex | Barrier Strip Terminal Block, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,137 | |||
AD7510DIJNZ![]() | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDIP16 RoHS : Compliant | 11,343 | |||
| 1975105 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,181 | |||
| SW7510GBC | Analog Devices Inc | Multiplexers/Switches, 4 Func RoHS : Not Compliant | 9,937 | |||
| ADUM7510BRWZ-RL | Analog Devices Inc | 9,855 | ||||
| MAX17510ATB/V+T | Analog Devices Inc | 1 Output, BICMOS, PDSO10 RoHS : Compliant | 8,030 | |||
AD7510DISQ![]() | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, CDIP16 RoHS : Not Compliant | 7,757 | |||
AD7510DIJP![]() | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PQCC20 RoHS : Not Compliant | 7,596 | |||
| 1751066 | Phoenix Contact | Barrier Strip Terminal Block, 24A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,418 | |||
TPS75105DSKEVM-529![]() | Texas Instruments | Development kits/Accessories | 6,744 | |||
BUK7510-55AL,127![]() | NXP Semiconductors | Power Field-Effect Transistor, 122A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 6,550 | |||
| AD7510DIJN/+ | Analog Devices Inc | Multiplexers/Switches, 4 Func, CMOS, PDIP16 RoHS : Not Compliant | 5,732 | |||
| BUK9875-100A | Nexperia | Power Field-Effect Transistor, 7A I(D), 100V, 0.084ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 5,576 | |||
| 175101-07-M0.75 | Amphenol Corporation | Cable Assembly RoHS : Compliant | 585 | |||
![]() Waytek, Inc. | 7282557510 | Yazaki Corp | Yazaki 2.8 - 2 Male Connector |
| 1,294 | |
![]() Win Source Electronics | RC0603JR-07510RL | YAGEO Corporation | RES SMD 510 OHM 5% 1/10W 0603 RoHS : Compliant |
| 263,000 | |
| BUK9875-100A | Nexperia | TrenchMOS logic level FET RoHS : Compliant |
| 69,000 | ||
| RC0402FR-07510RL | YAGEO Corporation | RES 510 OHM 1% 1/16W 0402 RoHS : Compliant |
| 67,490 | ||
| BUK9875-100A/CU | Nexperia | RoHS : Compliant |
| 60,000 | ||
BUK9875-100A/CUX![]() | Nexperia | MOSFET N-CH 100V 7A SOT223 RoHS : Compliant |
| 51,000 | ||
PSMN075-100MSEX![]() | Nexperia | MOSFET N-CH 100V 18A LFPAK33 RoHS : Compliant |
| 45,000 | ||
TLV75101PDSQR![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 10WSON / Linear Voltage Regulator IC Positive Adjustable 2 Output 500mA 10-WSON (2x2) RoHS : Compliant |
| 36,000 | ||
BQ27510DRZT-G1![]() | Texas Instruments | IC LI-ION BATT FUEL GAUGE 12SON RoHS : Compliant |
| 24,840 | ||
BQ27510DRZR-G1![]() | Texas Instruments | Fuel Gauge Li-Ion/Li-Pol 12-Pin VSON EP T/R / IC BATT FUEL GAUGE LI-ION 12SON RoHS : Compliant |
| 23,180 | ||
STTS751-0DP3F![]() | STMicroelectronics | SENSOR TEMPERATURE SMBUS 6UDFN RoHS : Compliant |
| 15,000 | ||
TLV75101PDSQT![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 10WSON RoHS : Compliant |
| 13,000 | ||
BQ27510DRZR-G3![]() | Texas Instruments | IC BATT FUEL GAUGE LI-ION 12SON RoHS : Compliant |
| 5,670 | ||
BQ27510DRZT![]() | Texas Instruments | IC BATT FUEL GAUGE LI-ION 12-SON RoHS : Compliant |
| 5,580 | ||
BQ27510DRZTG4![]() | Texas Instruments | Direct Battery Connection RoHS : Compliant |
| 5,540 | ||
SN75107BD![]() | Texas Instruments | IC RECEIVER 0/2 14SOIC / 0/2 Receiver 14-SOIC RoHS : Compliant |
| 1,768 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |