| Electronic Components Datasheet Search |
|
7512L-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | TE_0,75-12/100 | ERKO | Tip: bootlace ferrule; insulated; copper; 0.75mm2; 12mm; tinned |
| 1,470 | |
| HRP-75-12 | Mean Well | Power supply: switching; for building in,modular; 75.6W; 12VDC RoHS : Compliant |
| 92 | ||
| PDRC-75-12 | Bel Power Solutions | Power supply: switching; for DIN rail; 72W; Uout: 12V; 6A; IP20 |
| 32 | ||
| ELP-75-12 | Mean Well | Power supply: switching; open; 75W; 127÷370VDC; 90÷264VAC; OUT: 1 RoHS : Compliant |
| 5 | ||
| NSP-75-12 | Mean Well | Power supply: switching; for building in,modular; 75W; 12VDC RoHS : Compliant |
| 4 | ||
| LA 27 K 75 12 | Fischer Elektronik GmbH & Co KG | Heatsink: extruded; L: 75mm; W: 75.5mm; H: 65.8mm; aluminium; raw |
| 2 | ||
| CT3751-200-9 | Cal Test Electronics | Test lead: single; banana plug 4mm,both sides; insulated; Len: 2m |
| 0 | ||
| KHRR/75125 | Quick USA | Nozzle; for soldering fume absorber; ESD; Øin: 125mm; Øout: 75mm |
| 0 | ||
| OPAC-2X0.75-1-2057 | ESPE Group | Wire; round; H03VV-F,OMY; 2x0.75mm2; stranded; Cu; PVC; textile |
| 0 | ||
| KAD07512D | Chinfa Electronics Ind Co Ltd | Converter: AC/DC; 6.6W; Uin: 65÷265VAC; Uout: 5VDC; Uout2: 12VDC |
| 0 | ||
| MHB75-12S24 | Mean Well | Converter: DC/DC; 75W; Uin: 9÷18VDC; Uout: 24VDC; Iout: 3.13A; THT RoHS : Compliant |
| 0 | ||
| PSD 75/12 | POWER SEMICONDUCTORS INC | Bridge rectifier: three-phase; Urmax: 1.2kV; If: 95A; Ifsm: 850A |
| 0 | ||
| PSDT 175/12 | POWER SEMICONDUCTORS INC | Bridge rectifier: full-controlled; Urmax: 1.2kV; If: 167A; module |
| 0 | ||
MMO175-12IO7![]() | IXYS Corporation | Module: thyristor; opposing; 1.2kV; 80A; ECO-PAC 1; Ufmax: 1.57V RoHS : Compliant |
| 0 | ||
| AT5 375 1277ZA | OPTIBELT GmbH | Timing belt; AT5; W: 12mm; H: 2.7mm; Lw: 375mm; Tooth height: 1.2mm |
| 0 | ||
![]() Avnet Americas | 42751-2 | TE Connectivity | Ring Terminal 16AWG to 14AWG 1/4" Tin - Tape and Reel (Alt: 42751-2) RoHS : Compliant |
| 328,000 | |
| 3357-5125 | 3M Interconnect | - Bulk (Alt: 7000057893) RoHS : Compliant |
| 1,200 | ||
| Y0075120R000T9L | VPG Foil Resistors | Precision Resistor Metal Foil 120Ohm 0.01% Bulk - Bulk (Alt: Y0075120R000T9L) RoHS : Compliant |
| 150 | ||
| LRS-75-12 | Mean Well | - Boxed Product (Development Kits) (Alt: LRS-75-12) RoHS : Compliant |
| 100 | ||
| 467-5125-A62 | Amphenol Corporation | - Trays (Alt: 467-5125-A62) | 60 | |||
| XLG-75-12-A | Mean Well | AC/DC LED Driver, 60 W, 12 VDC, 5 A, Constant Current, Constant Voltage, 100 VAC to 305 VAC, XLG-75 Series - Boxed Product (Development Kits) (Alt: XLG-75-12-A) RoHS : Compliant |
| 21 | ||
| RSP-75-12 | Mean Well | - Boxed Product (Development Kits) (Alt: RSP-75-12) RoHS : Compliant |
| 6 | ||
| SDR-75-12 | Mean Well | - Boxed Product (Development Kits) (Alt: SDR-75-12) RoHS : Compliant |
| 6 | ||
| 00751200 | Toradex Inc | 00751200VERDINAM62D1GBWBIT - Trays (Alt: 00751200) RoHS : Compliant | 5 | |||
| TW-02-06-T-S-175-125 | Samtec Inc | - Bulk (Alt: TW-02-06-T-S-175-125) RoHS : Compliant |
| 0 | ||
| BFC237512272 | Vishay Intertechnologies | - Tape and Reel (Alt: BFC237512272) RoHS : Compliant |
| 0 | ||
| AW-90-03-G-D-175-125 | Samtec Inc | - Rail/Tube (Alt: AW-90-03-G-D-175-125) RoHS : Compliant |
| 0 | ||
| 10157575-1210332LF | Amphenol Corporation | FITMATE 2.0, HEADER, VER-TICAL, DIP, ACTIVE LATCH - Tape and Reel (Alt: 10157575-1210332LF) RoHS : Not Compliant |
| 0 | ||
| 3875120 | Advanced Energy Industries Inc | IS 140, MB16, 600...1600C, LASER TARGETING, FOCUSABLE OPTICS - Bag (Alt: 3875120) RoHS : Compliant |
| 0 | ||
| 70475-1212 | Molex | SL IDT OPT D MALE 24AWG 15SAU 12CKT - Bulk (Alt: 0704751212) RoHS : Compliant |
| 0 | ||
![]() Newark | TW-02-06-T-S-175-125 | Samtec Inc | Conn Stack Brd, 2Mm, 2Pos, Hdr; |Samtec, Inc. TW-02-06-T-S-175-125 RoHS : Compliant |
| 1,390 | |
| HW-03-09-G-D-375-120 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. HW-03-09-G-D-375-120 RoHS : Compliant |
| 1,246 | ||
| VLMU35CB21-275-120 | Vishay Intertechnologies | Uv Emitter, 273Nm, Uv-C, 3.45Mm X 3.45Mm; |Vishay VLMU35CB21-275-120 RoHS : Compliant |
| 1,101 | ||
| VLMU35CB21-275-120 | Vishay Intertechnologies | Uv Emitter, 273Nm, Uv-C, 3.45Mm X 3.45Mm; |Vishay VLMU35CB21-275-120 RoHS : Compliant |
| 1,101 | ||
| GRO175121A | Essentra Components | Grommet, Pvc, 44.5Mm, Black; Grommet Type:Open; Cable Diameter Min:-; Cable Diameter Max:38.1Mm; Grommet Material:Pvc (Polyvinylchloride); Mounting Hole Dia:44.5Mm; Panel Thickness Max:3.2Mm; Grommet Colour:Black Rohs Compliant: Yes RoHS : Compliant |
| 849 | ||
| TW-02-10-L-D-275-120 | Samtec Inc | Hdr Pcb 22Mm Samtec Tw-02-10-L-D-275-120; |Samtec, Inc. TW-02-10-L-D-275-120 RoHS : Not Compliant |
| 371 | ||
| ZW-20-09-L-D-375-125 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. ZW-20-09-L-D-375-125 RoHS : Compliant |
| 305 | ||
| TW-05-02-G-D-175-120 | Samtec Inc | Conn Stack Brd, 2Mm, 10Pos, Hdr; |Samtec, Inc. TW-05-02-G-D-175-120 RoHS : Compliant |
| 287 | ||
| ZW-04-20-T-S-875-120-003 | Samtec Inc | Conn Stack Brd, 2.54Mm, 4Pos, Hdr; |Samtec, Inc. ZW-04-20-T-S-875-120-003 RoHS : Compliant |
| 263 | ||
| VSC7512XMY | Microchip Technology Inc | Ethernet Switch, -40 To 125Degc/Qfnep172; Device Type:Gigabit Ethernet Switch; Supported Standards:Ieee 802.3Ab, Ieee 802.3Af, Ieee 802.3Az; Supply Voltage Min:950Mv; Supply Voltage Max:1.05V; Ic Case/Package:Qfn-Ep Rohs Compliant: Yes RoHS : Compliant |
| 73 | ||
| VSC7512XMY | Microchip Technology Inc | Ethernet Sw, 2.5Gbps, -40 To 125Deg C; |Microchip Technology VSC7512XMY RoHS : Compliant |
| 73 | ||
| FMCA2375-12 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2375-12 RoHS : Not Compliant |
| 19 | ||
| 75.12 | FACOM | Spanner, Socket, 12Mm; |Facom 75.12 RoHS : Not Compliant |
| 4 | ||
| KITDRIVER1EDN7512GTOBO1 | Infineon Technologies AG | Eval Board, 1Ch, Low Side Gate Driver; |Infineon Technologies KITDRIVER1EDN7512GTOBO1 RoHS : Compliant |
| 1 | ||
| 7512 | Tronex | Cutter, Large Oval Flush Long |Tronex 7512 RoHS : Not Compliant |
| 0 | ||
![]() RS | GRO175121A | Essentra Components | GROMMET; FLEXIBLE PVC; HOLE DIA .375IN; ID 1.500IN; H .375IN; BLACK; PK 1000 |
| 433 | |
| GRCU-58 (EN3751-282) | TE Connectivity | GR ROD CLAMP, COMPRESSION COUPLER GR DIA 5/8 IN |
| 82 | ||
| CA751/2 | Altech Corporation | SINGLE LEVEL TERMINAL BLOCKS INTERNAL JUMPER CTS16U 2 POLE |
| 50 | ||
| 751253 | RS Pro | DOOR/GATE STOPPER W/RUBBER CUSHION TIP |
| 5 | ||
| 2454751 (25533946) (SCIA1000500-010RS) | RS Pro | SCREW, 1-8 X 5 SOCKET HEAD CAP, PLAIN FINISH |
| 5 | ||
| 01075-126 (HS35F-1-14L-SS-250-ABC-5V/V-SCS60-EX-S) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 5V/V, 250 CYCLES/TURN, IP65, |
| 3 | ||
| CA1-B0-10-475-121-D (CA1B010475121D | CA1-B0-10-475-121-D | CA1B010475121D) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 3 | ||
| MPDB67512 | Mersen Electrical Power | POWER DISTRIBUTION BLOCK, OPEN STYLE, ALUMINUM, BOX-BOX,2P,1000VAC/DC,350A |
| 2 | ||
| UL PCM 175/125 T (6416922) | FIBOX | PC ENCLOSURE, 7" WIDE X 4.9" DEEP X 7" HIGH, TRANSPARENT COVER, UL 508 |
| 2 | ||
| UL PC 175/125 HG (6411322) | FIBOX | PC ENCLOSURE, 7" WIDE X 4.9" DEEP X 7" HIGH, GRAY COVER, UL 508 |
| 2 | ||
| 2453700 (25530898) (HXLI207512000-010RS) | RS Pro | 3/4 X 12 IN HEX HEAD LAG BOLT, GRADE A, ZINC PLATED |
| 2 | ||
| 2454317 (25530980) (HXLI20751200G-010RS) | RS Pro | 3/4 X 12 IN HEX HEAD LAG BOLT, GRADE A, GALVANIZED |
| 1 | ||
| 2452751 (25532067) (DPBFI0-60225P-500RS) | RS Pro | SCREW, #6 X 2 1/4 PHILLIPS BUGLE DRYWALL, BLACK FINE THREAD |
| 1 | ||
| 01075-129 (HS35F-1-14L-R2-SS-1000-ABZC-5V/V-TB-EX-S) | BEI Sensors | ENCODER INCREMENTAL OPTICAL 5V/V 1000 CYCLES/TURN IP65 |
| 1 | ||
| 7512 | CR Seals | SINGLE LIP WAVE OIL SEAL, I.D. 0.748 IN, O.D. 1 IN, THICKNESS 0.2362 IN |
| 0 | ||
![]() Microchip Technology Inc | LM2575-12YN | Microchip Technology Inc | 1A Step-Down SMPS Regulator, PDIP, Projected EOL: 2051-09-03 RoHS : Compliant |
| 1,775 | |
| LM2575-12WT | Microchip Technology Inc | 1A Step-Down SMPS Regulator, TO-220, Projected EOL: 2051-09-03 RoHS : Compliant |
| 564 | ||
| UM7512DR | Microchip Technology Inc | Si PPIN Hermetic Stud, Projected EOL: 2046-08-15 RoHS : Not Compliant |
| 96 | ||
| UM7512CR | Microchip Technology Inc | Si PPIN Hermetic Stud, Projected EOL: 2046-08-15 RoHS : Not Compliant |
| 55 | ||
| PIC7512 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UM7512B | Microchip Technology Inc | Si PPIN Hermetic Glass Axial, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| UM7512D | Microchip Technology Inc | Si PPIN Hermetic Stud, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| UM7512SM | Microchip Technology Inc | Si PPIN Hermetic MELF, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| GC4975-12 | Microchip Technology Inc | Si PIN Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| LM2575-12WU | Microchip Technology Inc | 1A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2051-09-03 RoHS : Compliant |
| 0 | ||
| LM2575-12YWM | Microchip Technology Inc | 1A Step-Down SMPS Regulator, SOIC, Projected EOL: 2051-09-03 RoHS : Compliant |
| 0 | ||
| LM2575-12WU-TR | Microchip Technology Inc | 1A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2051-09-03 RoHS : Compliant |
| 0 | ||
| LM2575-12YWM-TR | Microchip Technology Inc | 1A Step-Down SMPS Regulator, SOIC, Projected EOL: 2051-09-03 RoHS : Compliant |
| 0 | ||
| VCC1-1575-125M000000 | Microchip Technology Inc | VCC1-1575-125M000000, LDFN, Projected EOL: 2051-05-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| VCC1-1575-125M000000TR | Microchip Technology Inc | VCC1-1575-125M000000TR, LDFN, Projected EOL: 2051-05-19 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 16FW375125 | Micro Plastics Inc | 527 | |||
| GP1-031-175-12 | Groov-Pin Corporation | 500 | ||||
| 207512-100 | WASHERS | 450 | ||||
| 4521-75-125-3 | Seastrom Mfg | 200 | ||||
| MS28775-127 | MS O-RINGS | 129 | ||||
| AA6979-0.375-12 | Lyn-Tron Inc | 100 | ||||
| 14150-H-SS-.875-12 | Accurate Screw Machine | 70 | ||||
| 14010H-SS.375-12 | Accurate Screw Machine | 50 | ||||
| SS-7512-1032-0 | Globe Electronic Hardware Inc | 41 | ||||
| 1130H-SS1.75-12 | Accurate Screw Machine | 25 | ||||
| 1016-H-SS-.375-12A | Accurate Screw Machine | 22 | ||||
| 14412-H-SS-.375-12 | Accurate Screw Machine | 18 | ||||
| NE7512CSNP42 | MISC MAGNETS | 15 | ||||
| 5/16-24X.775 12PT G8 ZC | BOLTS | 5 | ||||
| MS28775-123 | MS O-RINGS | 4 | ||||
![]() Rochester Electronics | 949587-5120-A | Infineon Technologies AG | PNOR |
| 130 | |
1EDN7512GXTMA1![]() | Infineon Technologies AG | Gate Driver N-Channel MOSFET 2 Driver Low-Side 6-SON T/R RoHS : Compliant |
| 86,187 | ||
TPS75125MPWPREP![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 1.5A 20-SOP T/R RoHS : Compliant |
| 1,955 | ||
DAC7512E/2K5![]() | Texas Instruments | IC DAC 1 CONV 12Bits String DAC 3-Wire Serial, DSP, MICROWIRE, QSPI, SPI 8-SOP T/R RoHS : Compliant |
| 36,696 | ||
SN75123DR![]() | Texas Instruments | IC INTERFACE Driver 4.75V - 5.25V 16-SOIC T/R RoHS : Not Compliant |
| 17,500 | ||
SN75124N![]() | Texas Instruments | IC INTERFACE Receiver 4.75V - 5.25V 16-DIP Tube RoHS : Compliant |
| 25,334 | ||
EPM7512BTC144-10![]() | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 144-QFP Tray RoHS : Not Compliant |
| 20 | ||
EPM7512BQC208-10![]() | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 208-QFP Tray RoHS : Not Compliant |
| 271 | ||
EPM7512BUC169-7![]() | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 169-BGA Tray RoHS : Not Compliant |
| 261 | ||
XC17512LSO20C![]() | AMD Xilinx | OTP 512kbit 3V - 3.6V 20-SOIC RoHS : Not Compliant |
| 636 | ||
CY37512VP256-83BGC![]() | Cypress Semiconductor | CPLD In-System Reprogrammable™ (ISR™) CMOS 512 Macrocell 3V - 3.6V 256-BGA Tube RoHS : Not Compliant |
| 80 | ||
EL7512CYZ-T7![]() | Intersil Corporation | IC VOLT REG Transistor Driver Step-Up Boost 1 OUT 2V - 12V 10-SOP T/R RoHS : Compliant |
| 4,500 | ||
| LM2575-12BN | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 12V 1A 16-DIP Tube RoHS : Not Compliant |
| 750 | ||
| DS75124N | National Semiconductor Corporation | Line Receiver, 3 Func, 3 Rcvr, BIPolar, PDIP16 RoHS : Not Compliant |
| 166 | ||
| MD27512-25/B | Rochester Electronics LLC | 27512 - 512K (64K x 8) EPROM | 164 | |||
![]() Sager | TW-02-06-T-S-175-125 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 1,390 | |
| TW-02-10-L-D-275-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 371 | |||
| TW-05-02-G-D-175-120 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 287 | ||
| BCBD75-12-15F | Eaton Bussmann | Disconnect Switches No exact match available | 0 | |||
| CA2-B0-24-475-122-DF | Carling Technologies | Circuit Breakers CA2B024475122DF RoHS : Compliant |
| 0 | ||
| CA2-B0-26-475-12C-C | Carling Technologies | Circuit Breakers CA2B02647512CC RoHS : Compliant |
| 0 | ||
| AW-16-03-G-D-175-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| AW-90-03-G-D-175-125 | Samtec Inc | Board to Board & Mezzanine Connectors 0.80 mm Flex Stack, Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| 1511175126 | Molex | MGRID SHRD HDR TH/OPEG&CAP GFLF 26CKT RoHS : Compliant |
| 0 | ||
| 0015477512 | Molex | Headers & Wire Housings CGrid VT Shrd Hdr wPg Tin 12Ckt RoHS : Compliant |
| 0 | ||
| 0387512110 | Molex | Barrier Terminal Blocks SR BTS WW CS 10 ASY | 0 | |||
| 2-1437512-1 | TE Connectivity | Extraction, Removal & Insertion Tools TX8136-20/84PCS | 0 | |||
| 2751218 | Phoenix Contact | I/O Modules IBS ST 24 BK DIO 8/8/3-LK | 0 | |||
| EA3-B0-64-475-12A-HB | Carling Technologies | Circuit Breakers EA3B06447512AHB RoHS : Compliant |
| 0 | ||
| 5055751291 | Molex | 2.0W/B SMT VT PLUG 12CKT BLK G010 WKP RoHS : Compliant |
| 0 | ||
![]() Coilcraft Direct | SLR1075-121KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 144 | |
| CMT4-7.5-12L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 7 | ||
| SLC1175-121MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TLV77512PDBVR | Texas Instruments | RoHS : Compliant | 323,081 | ||
DAC7512N/250![]() | Texas Instruments | DAC7512N/250 , 12 位-Bit DAC, 95ksps, Serial (SPI/QSPI/Microwire)接口, 6针 SOT-23封装 RoHS : Compliant | 236 | |||
BD37512FS-E2![]() | ROHM Semiconductor | RoHS : Compliant |
| 30 | ||
DAC7512N/3K![]() | Texas Instruments | Low-Power, Rail-to-Rail Output, 12-Bit Serial Input Digital-to-Analg Converter RoHS : Compliant | 29 | |||
DAC7512E/250![]() | Texas Instruments | IC 12-BIT R-R D/A CONV 8VSSOP RoHS : Compliant | 21 | |||
| RHRG75120 | onsemi | RHRG75120 Series 75 A 1200 V Max Reverse Voltage Hyperfast Diode - TO-247-2 RoHS : Compliant | 10 | |||
![]() ComSIT USA | AD7512DIJPZ![]() | Analog Devices Inc | IC SPDT 2:1 2 �15V 20-LCC Tube RoHS : Compliant | 1,531 | ||
| 7427512 | Wurth Elektronik | WE-SUKW SMT EMI SUPPRESSION5-HOLE FERRITE BEAD Ferrite Bead, 3 Function(s), 5A, 2 Pin(s) RoHS : Compliant | 1,175 | |||
| DSGP1575124A02 | Taoglas Antenna Solutions | Electronic Component RoHS : Compliant | 564 | |||
| 1EDN7512GXTMA1 | infineon? | Buffer/Inverter Based MOSFET Driver, PDSO6 RoHS : Not Compliant | 193 | |||
| EPM7512AEBC2567 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 5.5ns, 512-Cell, CMOS, PBGA256 RoHS : Not Compliant | 99 | |||
| TDA7512FTR | STMicroelectronics | FM CAR-RADIO TUNER IC WITH INTELLIGENT SELECTIVITY SYSTEM (ISS) Audio Single Chip Receiver, PQFP64 RoHS : Compliant | 88 | |||
| EPM7512BUC1697N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 5.5ns, 512-Cell, CMOS, PBGA169 RoHS : Compliant | 47 | |||
| EPM7512AEQC20810 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 512-Cell, CMOS, PQFP208 RoHS : Not Compliant | 32 | |||
| EPM7512AEQC20812N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 12ns, 512-Cell, CMOS, PQFP208 RoHS : Compliant | 24 | |||
| EPM7512AEQI20810 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 512-Cell, PAL-Type, CMOS, PQFP208 RoHS : Not Compliant | 22 | |||
| XC17512LPC | AMD Xilinx | XC1700L SERIES CONFIGURATION PROM Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 10 | |||
AD7512DIJN![]() | Analog Devices Inc | Analog Switch Dual SPDT 14-Pin PDIP N RoHS : Not Compliant | 8 | |||
| EPM7512BBI2567 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 7.5ns, 512-Cell, CMOS, PBGA256 RoHS : Not Compliant | 6 | |||
AD7512DIJQ![]() | Analog Devices Inc | SPDT, 2 Func, 1 Channel, CMOS, CDIP14 RoHS : Not Compliant | 2 | |||
| EPM7512AEFC25612 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 12ns, 512-Cell, CMOS, PBGA256 RoHS : Not Compliant | 1 | |||
![]() Interstate Connecting Components | 181-075-126 | Glenair Inc | FIBER OPTIC CONNECTOR TERMINI RoHS : Compliant |
| 160 | |
| RT-375-1/2-X-SP | TE Connectivity | NB15944001 M23053/18-208-C RT-375-1/2-X-S RoHS : Compliant |
| 50 | ||
| 10157575-1210332LF | Amphenol FCi | FITMATE 2.0, HEADER, VER-TICAL | 0 | |||
| 687-751-20 | Glenair Inc | MICRO-D HARDWARE | 0 | |||
| C751253001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55D1131-22-3/6/9-9(S82M) | 0 | |||
| 775129-000 | TE Connectivity | SMOE-81405-(S100) | 0 | |||
| 2487512-1 | TE Connectivity | LP 6.2 RECPTACLE, 14-18AWG RoHS : Compliant | 0 | |||
| 1-2106751-2 | TE Connectivity | Connector Thru Hole-IDC 2 pos 20AWG RoHS : Compliant |
| 0 | ||
| 010-007512-0001 REV C | Amphenol Aerospace | 0 | ||||
| 687-751-22 | Glenair Inc | MICRO-D HARDWARE | 0 | |||
| 2837512-1 | TE Connectivity | APPLICATOR TO MAKE LOOSE PIECE |
| 0 | ||
| MS27512-24A | Glenair Inc | ACCESSORIES - JAM NUT 38999 |
| 0 | ||
| MS27512-12C | Glenair Inc | ACCESSORIES - JAM NUT 38999 |
| 0 | ||
| 175124-1 | TE Connectivity | 070 MLC REC CONT RoHS : Compliant |
| 0 | ||
| 3-2323751-2 | TE Connectivity | ASSY,HDR,VERT,GWT,NO-BOSS,DUAL RoHS : Compliant | 0 | |||
![]() NexGen Digital | XC17512LPC | AMD Xilinx | 6 | |||
![]() PEI Genesis | X22217512 | E-T-A |
| 12 | ||
| 1461040-175-125-310-440-0 | ISC Engineering |
| 8 | |||
| 49675-12 | ITT Interconnect Solutions |
| 2 | |||
| C10-263975-12FL | Amphenol Corporation |
| 0 | |||
| C10-263975-12G | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 175124-1 | TE Connectivity | Connectors RoHS : Compliant |
| 89,760 | |
| 1-2106751-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 10,352 | ||
| TW-02-06-T-S-175-125 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 917 | ||
| HW-03-09-G-D-375-120 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 822 | ||
| TW-04-03-T-S-275-126 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 498 | ||
| HC3D075122 | Evans Group | HC3D075122 |
| 364 | ||
| ZW-04-08-G-S-275-125 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 229 | ||
| ZW-20-09-L-D-375-125 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 201 | ||
| TW-05-02-G-D-175-120 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 189 | ||
| ZW-04-20-T-S-875-120-003 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 174 | ||
| ZW-06-20-T-S-875-120 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 160 | ||
| ZW-10-12-L-S-675-125 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 146 | ||
| 1554751-2 | TE Connectivity | Connectors |
| 13 | ||
| 181-075-126 | Glenair Inc | TERMINI - FIBER OPTIC CONNECTORS RoHS : Compliant |
| 1 | ||
| 49675-12 | VEAM | BUSH A W/LIP 20/22 FR |
| 1 | ||
![]() Richardson RFPD | REC7.5-1212DRW/H3/A/M/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT -12V/12V -0.312A/0.312A 7 RoHS : Compliant |
| 0 | |
| HS75 120R F | Ohmite Mfg Co | Res Wirewound 120 Ohm 1% 24/75W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| REC7.5-1209DRW/H2/A/M/SMD | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.417A/-0.417A 7.5 RoHS : Compliant |
| 0 | ||
| REC7.5-1209SRW/H2/A/M/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 9V 0.833A 7.5W Medical 18 RoHS : Compliant |
| 0 | ||
| REC7.5-1212DRW/H2/A/M/SMD | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 12V/-12V 0.312A/-0.312A 7 RoHS : Compliant |
| 0 | ||
| REC7.5-1215SRW/H2/A/M/SMD | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 15V 1.5A 7.5W Medical 18- RoHS : Compliant |
| 0 | ||
| REC7.5-123.3SRW/H3/A/M/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 3.3V 1.8A 7.5W Medical 9- RoHS : Compliant |
| 0 | ||
| MOD-PWR-MM-C3M0075120D | Wolfspeed | C3M0075120D MOSFET Daughter Card RoHS : Not Compliant |
| 0 | ||
| VSC7512XMY | Microchip Technology Inc | Ethernet Switch 10-Port 1000Mbps DRQFN Tray RoHS : Compliant |
| 0 | ||
| REC7.5-1212DRW/H1/A/M/SMD/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 12V/-12V 0.312A/-0.312A 7 RoHS : Compliant |
| 0 | ||
| REC7.5-1212SRW/H3/A/M | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 12V 0.625A 7.5W Medical 8 RoHS : Compliant |
| 0 | ||
| REC7.5-123.3SRW/H1/A/M/SMD | RECOM Power GmbH | Module DC-DC 12VIN 1-OUT 3.3V 1.8A 7.5W Medical 18 RoHS : Compliant |
| 0 | ||
| PSEP417512CAU | Wall Industries Inc | 100 to 200 Watts AC/DC Open Frame Power Supplies S | 0 | |||
| REC7.5-1209DRW/H2/A/M/SMD-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.417A/-0.417A 7.5 RoHS : Compliant |
| 0 | ||
| REC7.5-1215DRW/H1/A/M/CTRL | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 15V/-15V 0.25A/-0.25A 7.5 RoHS : Compliant |
| 0 | ||
![]() Rutronik | VLMU35CB20-275-120 | Vishay Intertechnologies | UVC LED LOW 10mW 100mA 120°275NM RoHS : Compliant |
| 40 | |
| VLMU35CT20-275-120 | Vishay Intertechnologies | UVC LED MID 19mW 150mA 120°275NM RoHS : Compliant |
| 38 | ||
![]() Chip 1 Exchange | 2238-867-75129 | Samsung Electro-Mechanics | INSTOCK | 5,500 | ||
| 7427512 | Wurth Elektronik | INSTOCK RoHS : Compliant | 1,685 | |||
| 7427512- | Wurth Elektronik | INSTOCK | 778 | |||
| AD7512LB | Analog Devices Inc | INSTOCK | 480 | |||
| AD7512DIJN | AD E | INSTOCK | 434 | |||
| 3-2106751-2 | INSTOCK | 315 | ||||
| LP7512VLM014_06_3158 | INSTOCK | 268 | ||||
| SN75124N | INSTOCK | 213 | ||||
| SN75129N | INSTOCK | 201 | ||||
| M275123FI | INSTOCK | 168 | ||||
| 17 51 25 1 | INSTOCK | 87 | ||||
| AC-751222-078 | INSTOCK | 62 | ||||
| M275123F1 | SGS Semiconductor Ltd | INSTOCK | 48 | |||
| M27512FI | INSTOCK | 14 | ||||
SAK-TC1797-512F180EAC![]() | Infineon Technologies AG | INSTOCK RoHS : Not Compliant | 5 | |||
![]() Avnet Abacus | 10157375-12101LF | Amphenol Corporation | 10MM PITCH HEADER RIGHT ANGLE GOLD FLASH PLA - Tape and Reel (Alt: 10157375-12101LF) RoHS : Compliant | 12,000 | ||
| 1751248 | Phoenix Contact | WireToBoard Terminal Block 35 mm 2 Ways 30 AWG 16 AWG 15 mm Screw (Alt: 1751248) RoHS : Compliant | 720 | |||
| 1751280 | Phoenix Contact | WireToBoard Terminal Block 35 mm 6 Ways 30 AWG 16 AWG 15 mm Screw (Alt: 1751280) RoHS : Compliant | 480 | |||
| 1751264 | Phoenix Contact | Conn PC Board 4 POS 35mm RA Through Hole 135A (Alt: 1751264) RoHS : Compliant | 180 | |||
| 1017512 | Phoenix Contact | Conn PC Board 11 POS 508mm RA Through Hole 32A (Alt: 1017512) RoHS : Compliant | 0 | |||
| 2487512-1 | TE Connectivity | LP 62 RECPTACLE 1418AWG (Alt: 2487512-1) RoHS : Compliant | 0 | |||
| 423751247 | Molex | Conn Unshrouded Header HDR 5 POS 254mm Solder ST ThruHole Bag (Alt: 423751247) RoHS : Compliant | 0 | |||
| 423751247 | Molex | Conn Unshrouded Header HDR 5 POS 254mm Solder ST ThruHole Bag (Alt: 423751247) RoHS : Compliant | 0 | |||
| 1437512-6 | TE Connectivity | AMP14375126 (Alt: 1437512-6) RoHS : Not Compliant | 0 | |||
| P0751-223T | Pulse Electronics Corporation | UNSHIELDED DRUM CORE INDUCTOR DO3316PXXX (Alt: P0751-223T) RoHS : Not Compliant | 0 | |||
| 1200875129 | Molex | MLX1200875129 (Alt: 1200875129) RoHS : Compliant | 0 | |||
| 1-2106751-2 | TE Connectivity | (Alt: 1-2106751-2) RoHS : Compliant | 0 | |||
| 1-2106751-2 | TE Connectivity | (Alt: 1-2106751-2) RoHS : Compliant | 0 | |||
| AMED75-12SNZ | Aimtec | ACDC DIN Rail Power Supply Household Industrial ITE Transformer Adjustable Fixed (Alt: AMED75-12SNZ) RoHS : Compliant | 0 | |||
| AMES75-12SNZ-P | Aimtec | ACDC Enclosed Power Supply PSU Household Industrial ITE LED Lighting Transformer (Alt: AMES75-12SNZ-P) RoHS : Compliant | 0 | |||
![]() Avnet Asia | G751-2P1F | Global Mixed-Mode Technology Inc | (Alt: G751-2P1F) RoHS : Compliant | 0 | ||
| 5055751281 | Molex | Pin Header, 12 Contacts, 1 Row, 2mm, Matte Tin, 3.4A, Straight, Shrouded, Brass, Wire-to-Board, SMT (Alt: 5055751281) RoHS : Compliant | 0 | |||
| 2459751-2 | TE Connectivity | (Alt: 2459751-2) RoHS : Compliant | 0 | |||
| VLMU35CB20-275-120 | Vishay Intertechnologies | SMD-LED UVC 275NM 120? QFN-E4 (Alt: VLMU35CB20-275-120) RoHS : Compliant | 0 | |||
| 2020751200 | Molex | OSFP 1X4 CAGE ASSY, CT, 0RL (Alt: 2020751200) RoHS : Compliant | 0 | |||
| 2493751-2 | TE Connectivity | (Alt: 2493751-2) RoHS : Compliant | 0 | |||
| 0533751210 | Molex | Pin Header, 12 Contacts, 1 Row, 2.5mm, Tin, 3A, Straight, Shrouded, Phosphor Bronze, Wire-to-Board (Alt: 0533751210) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG47512V | Renesas Electronics Corporation | (Alt: SLG47512V) RoHS : Compliant | 0 | ||
| QPC7512SR | Qorvo | (Alt: QPC7512SR) RoHS : Compliant | 0 | |||
| VSC7512XMY | Microchip Technology Inc | (Alt: VSC7512XMY) RoHS : Compliant | 0 | |||
| LM2575-12YN | Microchip Technology Inc | 1A STEPDOWN SMPS REGULATOR (Alt: LM2575-12YN) RoHS : Compliant | 0 | |||
| LM2575-12YWM | Microchip Technology Inc | 1A STEPDOWN SMPS REGULATOR (Alt: LM2575-12YWM) RoHS : Compliant | 0 | |||
| LM2575-12WU-TR | Microchip Technology Inc | 1A STEPDOWN SMPS REGULATOR (Alt: LM2575-12WU-TR) RoHS : Compliant | 0 | |||
| WNSC2M75120R6Q | WeEn Semiconductor Co Ltd | Silicon Carbide MOSFET Single N Channel 539 A 12 kV 90 Milliohms TO247 4 Pins (Alt: WNSC2M75120R6Q) RoHS : Compliant | 0 | |||
| WNSC2M75120W6Q | WeEn Semiconductor Co Ltd | Silicon Carbide MOSFET Single N Channel 428 A 12 kV 90 Milliohms TO247 3 Pins (Alt: WNSC2M75120W6Q) RoHS : Compliant | 0 | |||
| WNSC2M75120B76J | WeEn Semiconductor Co Ltd | WNSC2M75120B7TO2637LREEL 13 Q1T1 STANDARD MAR12 NC 934073465118 (Alt: WNSC2M75120B76J) RoHS : Compliant | 0 | |||
| WNSC2M75120TB6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M75120TB6J) RoHS : Compliant | 0 | |||
| WNSC2M75120B7-A6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M75120B7-A6J) RoHS : Compliant | 0 | |||
| WNSC2M75120TB-A6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M75120TB-A6J) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMES75-12SNZ-PQ | Aimtec | RoHS : Compliant |
| 0 | |
| AMES75-12SNZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| GP.1575.12.4.A.02 | Taoglas Antenna Solutions | GP.1575.12.4.A.02 GPS/Galileo 12*12*4mm 1575.42MHz Patch Antenna |
| 0 | ||
| MFZP-075-12-JB0-C | Nipron Co | 75W 12V medical power supply |
| 0 | ||
| AMESP75-12S277NZ-PQ | Aimtec | RoHS : Compliant |
| 0 | ||
| DSGP.1575.12.4.A.02 | Taoglas Antenna Solutions | DSGP.1575.12 12*12*4mm GPS L1 & Galileo E1 Ceramic Patch |
| 0 | ||
| MFZP-075-12-JB0-K | Nipron Co | 75W 12V medical power supply |
| 0 | ||
| AMESP75-12S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| CHB75-12S05 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S05N | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S12 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S12N | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S15 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S15N | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75-12S24 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | 2030600 (FÜR PNS75/125) | Sicmer | 17 | |||
| SLY607512G | Fischer Connectors | 3 | ||||
![]() Component Electronics, Inc | P0751.223NLT | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 745 | |
| TW-16-06-G-D-375-120 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 124 | ||
| AD7512MS-400MM | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 109 | ||
| ZW-50-15-T-D-375-125 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 102 | ||
| 2222-037-51221 | Vishay BCcomponents | IN STOCK SHIP TODAY | 51 | |||
| D27512-250V05 | Intel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 41 | |||
| MC75129P | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 34 | |||
| SN75129N | National Semiconductor Corporation | IN STOCK SHIP TODAY | 27 | |||
| P7512-1 | PROTEON | IN STOCK SHIP TODAY |
| 25 | ||
| AD7512HS-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 19 | ||
| AD7512MX-LF | ADDA USA Corporation | IN STOCK SHIP TODAY |
| 19 | ||
M27512-2F1![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| EFS175-124 | Telkoor Power Supplies Ltd | IN STOCK SHIP TODAY | 5 | |||
| SN75121J | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant | 4 | |||
DAC7512E/250![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
![]() DB Roberts | 67512-SS-1 | Accurate Screw Machine |
| 39 | ||
| TD-175-12X | PennEngineering (PEM) | TY-D MOUNT UNPLATED 175# LOAD RATING; NO PLATE |
| 15 | ||
| 38751-2.5-30 | HeliCoil |
| 1 | |||
| GRO175121A | Essentra Components | 0 | ||||
| 7751-2.2 | HeliCoil | HAND TOOL M2.2X0.45 | 0 | |||
| DM1875-1/2C | Essentra Components | 1.875 ID 0.500 LENGTHPVC DIP Y | 0 | |||
| DM2375-1/2A | Essentra Components | 2.375 ID 0.500 LENGTHPVC DIP B | 0 | |||
| 7751-2.5 | HeliCoil | 0 | ||||
| DM0875-1/2A | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
| AELS8-12175-12.7S | PennEngineering (PEM) | M12 | 0 | |||
| 13RS037512B | Essentra Components | ROUND SPACER, .194 ID, .375 OD | 0 | |||
| 7751-2 | HeliCoil | 0 | ||||
| DM0375-1/2D | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
| DM2875-1/2A | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
| DM0375-1/2A | Essentra Components | 0 | ||||
![]() EBV Elektronik | VSC7512XMY | Microchip Technology Inc | (Alt: VSC7512XMY) RoHS : Compliant | 0 | ||
| LM2575-12WU | Microchip Technology Inc | (Alt: LM2575-12WU) RoHS : Compliant | 0 | |||
| WNSC2M75120B7 | WeEn Semiconductor Co Ltd | TO2637L NChannel SiC Mosfet 1200V 75mOhm (Alt: WNSC2M75120B7) RoHS : Compliant | 0 | |||
1EDN7512GXTMA1![]() | Infineon Technologies AG | MOSFET and Power Driver 8A Single Low Side InvertingNonInverting 6Pin WSON TR (Alt: SP001491590) RoHS : Compliant | 0 | |||
| WNSC2M75120R6Q | WeEn Semiconductor Co Ltd | Silicon Carbide MOSFET Single N Channel 539 A 12 kV 90 Milliohms TO247 4 Pins (Alt: WNSC2M75120R6Q) RoHS : Compliant | 0 | |||
| NL7512DGVH-350H | Broadcom Limited | Proprietary Interface KnowledgeBased Processors (Alt: NL7512DGVH-350H) RoHS : Compliant | 0 | |||
| WNSC2M75120B76J | WeEn Semiconductor Co Ltd | WNSC2M75120B7TO2637LREEL 13 Q1T1 STANDARD MAR12 NC 934073465118 (Alt: WNSC2M75120B76J) RoHS : Compliant | 0 | |||
| LM2575-12YWM-TR | Microchip Technology Inc | (Alt: LM2575-12YWM-TR) RoHS : Compliant | 0 | |||
| VS-E5PH7512L-N3 | Vishay Intertechnologies | (Alt: VS-E5PH7512L-N3) RoHS : Compliant | 0 | |||
| GP.1575.12.4.A.02 | Taoglas Antenna Solutions | RF Antenna 1575GHz Patch 05dBi 50 ohm Right Hand Circular (Alt: GP.1575.12.4.A.02) RoHS : Compliant | 0 | |||
| WNSC2M75120B7-A6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M75120B7-A6J) RoHS : Compliant | 0 | |||
| WNSC2M75120TB-A6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M75120TB-A6J) RoHS : Compliant | 0 | |||
| VLMU35CB21-275-120 | Vishay Intertechnologies | (Alt: VLMU35CB21-275-120) RoHS : Compliant | 0 | |||
| SGP.1575.12.4.A.02 | Taoglas Antenna Solutions | GPS 1575MHZ SMT MOUNT PATCH ANTENNA WITH PCB 121245MM (Alt: SGP.1575.12.4.A.02) RoHS : Compliant | 0 | |||
| VLMU35CB20-275-120 | Vishay Intertechnologies | (Alt: VLMU35CB20-275-120) RoHS : Compliant | 0 | |||
![]() Flip Electronics | EPM7512AEFC256-10N![]() | Altera Corporation | Stock RoHS : Compliant | 91 | ||
![]() Master Electronics | CA2-B0-24-475-122-DF | Carling Technologies | CA2B024475122DF RoHS : Compliant |
| 0 | |
| CA2-B0-26-475-12C-C | Carling Technologies | CA2B02647512CC RoHS : Compliant |
| 0 | ||
| AW-16-03-G-D-175-125 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| AW-90-03-G-D-175-125 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| TW-10-03-F-S-275-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-10-06-F-D-275-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-10-06-T-D-275-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-20-12-L-D-475-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-27-07-S-Q-475-125-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 2-1611751-2 | TE Connectivity | SPNO Pilot Duty Relay RoHS : Compliant |
| 0 | ||
| EA3-B0-64-475-12A-HB | Carling Technologies | Three-pole hydraulic-magnetic circuit breaker with handle actuator series trip 50/60Hz medium time delay with hi-inrush and 7.5A current rating. RoHS : Compliant |
| 0 | ||
| TW-02-06-T-S-175-125 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| TW-02-10-L-D-275-120 | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-02-10-L-D-275-120 RoHS : Compliant |
| 0 | ||
| TW-05-02-G-D-175-120 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| TW-05-06-L-D-275-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09662517512 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP STR 15P PL3 GC 4-40 RoHS : Compliant |
| 50 | |
| PSC-7512 | Altech Corporation | Power Supply, DIN Rail, 75W, 85-264V AC In, 12V DC Out, 6.3A, PSC Series RoHS : Compliant |
| 50 | ||
| 09661517512 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP STR 09P PL3 GC 4-40 RoHS : Compliant |
| 50 | ||
| TXN 75-124 | Traco Power | Switching Power Supplies 75W 24V 3.1A 3.9 x 3.8" Metal Encased |
| 50 | ||
| CHB75-12S24 | Cincon Electronics Corporation | Isolated DC/DC Converters - Through Hole DC-DC Converter, Half Brick, 75 Watt, Wide Input Range, Single Output, 9-18VDC Input, 24VDC Output RoHS : Compliant |
| 12 | ||
| MPDB67512 | Mersen Electrical Power | Barrier Terminal Blocks PWR DIS BLK AL INT 350A 2P 6 |
| 3 | ||
ICH7512S05![]() | XP Power | Power Supply; DC-DC CONVERTER, 75W RoHS : Compliant |
| 1 | ||
| RS-75-12 | Mean Well | Switching Power Supplies 72W 12V 6A, Adj Output, Enclosed, Input: 88 ~ 264 VAC, 125 ~ 373 VDC RoHS : Compliant |
| 0 | ||
| 82-6751.2000 | EAO AG | Pushbutton Switches Pushbutton, Maintained, 22mm, Alu Red, Flush, no LED,Solder Terminals |
| 0 | ||
| 09661557512 | HARTING Technology Group | D-Sub Standard Connectors DSUB SV FEM SSDP STR29 09P RoHS : Compliant |
| 0 | ||
| VMS-275-12 | CUI Inc | AC/DC Power Modules 275W 12V 22.92A Med 3x5 open PCB RoHS : Compliant |
| 0 | ||
| LPS-75-12 | Mean Well | Switching Power Supplies 74.4W 12V 6.2A RoHS : Compliant |
| 0 | ||
| ELG-75-12AB | Mean Well | Power Supply; AC-DC; LED Driver; 75W; 12V@5A; 100-305V In RoHS : Compliant |
| 0 | ||
| 09564517512 | HARTING Technology Group | D-Sub High Density Connectors 62P FEMALE STRT PCB 4-40 UNC PL3 PLATING RoHS : Compliant |
| 0 | ||
| 17021751201 | HARTING Technology Group | Hard Metric Connectors HAR-BUS HM MEL. TYP B, AFS 1 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10375-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375-12 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375-12 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 254 | |
| PE3W12875-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male to N Male Low Loss Cable 12 Inch Length Using LMR-600-FR Coax., Radio frequency assembly fire rated N male to N male low loss cable 12 inch length using LMR-600-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 12 inch length using LMR-600-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12875-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12875-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12875-12 is built with LMR-600-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 162 | ||
| PE3W06975-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Cable 12 Inch Length Using PE-SR402AL Coax., Radio frequency assembly TNC male to TNC male cable 12 inch length using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 12 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06975-12 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W06975-12 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 12 inch length using PE-SR402AL coax. |
| 121 | ||
| PE3C3675-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly N male to N male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C3675-12 can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C3675-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using PE-SR402FLJ coax. |
| 78 | ||
| PE3C5875-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum QMA Male to QMA Male Right Angle Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum QMA male to QMA male right angle low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum QMA male to QMA male right angle low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C5875-12, can also be known as a low PIM QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C5875-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM QMA male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5875-12 can also be used in the other direction and will be right angle QMA male to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum QMA male to QMA male right angle low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C10275-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to SMA male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to SMA male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10275-12 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10275-12 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3C10275-12 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10275-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 26 | ||
| PE3MSA00675-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB 3-Lug, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm, Length, Max: 12 inches. TRB Plug to TRB 3-Lug Jack Bulkhead 1553 Cable 12 Inch Length Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB plug to TRB 3-Lug jack bulkhead 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB plug to TRB 3-Lug jack bulkhead 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB 3-Lug cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB 3-Lug bulkhead cable connection on the other. Our 1553 TRB to TRB 3-Lug cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00675-12 can also be known as a MIL-STD-1553 1553 TRB male to TRB 3-Lug female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB 3-Lug female cable assembly PE3MSA00675-12 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB 3-Lug cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB plug to TRB 3-Lug jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00675-12 can also be used in the other direction and will be TRB 3-Lug jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB 3-Lug female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB 3-Lug cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB plug to TRB 3-Lug jack bulkhead 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax. |
| 6 | ||
| PE3M0275-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: Coax, RF Cable Specification: PE-SR047FL datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 D38999 Contact Pin to SMA Male Cable 12 Inch Length Using PE-SR047FL Coax with HeatShrink, LF Solder. The PE3M0275-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 100 degrees C. Our mini SMP pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Mini SMP pin to SMA male cable assembly is built with PE-SR047FL, which is a formable coax type. The Pasternack PE3M0275-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to SMA RF cable are available on our downloadable PDF datasheet. Mini SMP pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 3 | ||
| PE7512-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 2 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-40 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7512-40 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W04875-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female to TNC Male Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly BNC female to TNC male cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to TNC male cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our BNC to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W04875-12 can also be known as a BNC jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04875-12 RF cable has a PVC jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our BNC female to TNC male cable has a maximum VSWR of 1.4:1. BNC jack to TNC plug cable assembly PE3W04875-12 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04875-12 can also be used in the other direction and will be a TNC male to BNC female cable assembly if the opposite connectivity is required. BNC jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE7751-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 2 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 2 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-2 is a 2 dB fixed attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-2 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 2 dB. The Pasternack PE7751-2 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 2 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-2 will ship the same business day as purchased from Pasternack’s production facility. This 2 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE3W04275-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to MCX Jack Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to MCX jack cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX jack cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our SMA to MCX cable assembly has a male gender on end 1 and a jack on end 2. PE3W04275-12 can also be known as a SMA plug to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04275-12 RF cable has a FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. SMA plug to MCX female cable assembly PE3W04275-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04275-12 can also be used in the other direction and will be a MCX jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7512 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE7751-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 75 Ohms, Max Freq: 1,000 MHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.2:1, Input Power, Max (CW): 1 Watts, Body Material: Brass, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 80 deg C, Min Operating Temperature: -50 deg C. 20 dB Fixed Attenuator 75 Ohm BNC Male to 75 Ohm BNC Female Brass Tri-Metal body rated 1 Watt DC to 1 GHz. PE7751-20 is a 20 dB fixed attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7751-20 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 1 Watt. This attenuator has a maximum VSWR of 1.2:1 and operates between -50 and 80 deg C. Our fixed radio frequency attenuator with BNC connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated phosphor bronze inner conductor. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 20 dB. The Pasternack PE7751-20 attenuator is rated for maximum frequency up to 1 GHz. This fixed coaxial attenuator is suitable for instrumentation, cable TV and video distribution, prototyping and characterization and production systems applications. The 20 dB attenuator has a brass connector built with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7751-20 will ship the same business day as purchased from Pasternack’s production facility. This 20 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE34175-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using PE-SR401AL Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34175-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34175-12 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using PE-SR401AL coax. |
| 0 | ||
![]() Teledyne HiRel | CY37512P208-100UM | Teledyne HiRel | PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ | 0 | ||
| CY37512P208-83UMB | Teledyne HiRel | PROGRAMMABLE LOGIC DEVICE, 512 MACROCELL, ELECTRICALLY ALTERABLE, 83 MHZ | 0 | |||
![]() Vyrian | XC17512LPD8C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDIP8 RoHS : Not Compliant | 4,160 | ||
XC17512LSO20C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDSO20 RoHS : Not Compliant | 2,947 | |||
XC17512LPDG8C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDIP8 RoHS : Compliant | 2,731 | |||
XC17512LPCG20I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Compliant | 2,565 | |||
XC17512LSOG20I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDSO20 RoHS : Compliant | 2,565 | |||
XC17512LPC20I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 2,554 | |||
XC17512LPD8I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDIP8 RoHS : Not Compliant | 2,502 | |||
XC17512LPC20C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 2,264 | |||
XC17512LSO20I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDSO20 RoHS : Not Compliant | 1,921 | |||
XC17512LSOG20C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDSO20 RoHS : Compliant | 1,899 | |||
XC17512LPDG8I![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PDIP8 RoHS : Compliant | 1,868 | |||
XC17512LPCG20C![]() | AMD Xilinx | Configuration Memory, 512KX1, Serial, CMOS, PQCC20 RoHS : Compliant | 1,742 | |||
| XLG-75-12-A | Mean Well Enterprises | AC-DC Power Factor Correction Module | 825 | |||
| UM7512DR | Microsemi Corporation (now Microchip) | Pin Diode, Silicon RoHS : Not Compliant | 759 | |||
| UM7512CR | Microsemi Corporation (now Microchip) | Pin Diode, Silicon RoHS : Not Compliant | 660 | |||
![]() Win Source Electronics | 1EDN7512GXTMA1![]() | Infineon Technologies AG | IC GATE DRVR LOW-SIDE 6WSON / Low-Side Gate Driver IC Inverting, Non-Inverting PG-WSON-6-1 RoHS : Compliant |
| 33,360 | |
| 1EDN7512B | Infineon Technologies AG | 4.5V~20V 8A 4A SOT-23-5 Gate Drivers RoHS RoHS : Compliant |
| 27,000 | ||
| 7427512 | Wurth Elektronik | WE-SUKW SMD EMI Suppression 5-Hole Ferrite Bead | FERRITE BEAD 580 OHM 3318 1LN RoHS : Compliant |
| 23,380 | ||
1EDN7512BXTSA1![]() | Infineon Technologies AG | IC GATE DRVR LOW-SIDE SOT23-5 RoHS : Compliant |
| 15,929 | ||
| RHRG75120 | Fairchild Semiconductor Corporation | DIODE GEN PURP 1.2KV 75A TO247 / Rectifier Diode Switching 1.2KV 75A 100ns 2-Pin(2+Tab) TO-247 Tube RoHS : Compliant |
| 14,800 | ||
DAC7512N/3K![]() | Texas Instruments | IC 12-BIT R-R D/A CONV SOT-23-6 RoHS : Compliant |
| 12,000 | ||
DAC7512N/3KG4![]() | Texas Instruments | IC 12-BIT R-R D/A CONV SOT-23-6 RoHS : Compliant |
| 9,140 | ||
DAC7512E/250![]() | Texas Instruments | IC 12-BIT R-R D/A CONV 8VSSOP RoHS : Compliant |
| 5,000 | ||
DAC7512E/2K5![]() | Texas Instruments | DAC 1-CH Resistor-String 12-bit 8-Pin VSSOP T/R / IC 12-BIT R-R D/A CONV 8VSSOP RoHS : Compliant |
| 4,750 | ||
DAC7512E/250G4![]() | Texas Instruments | IC 12-BIT R-R D/A CONV 8VSSOP RoHS : Compliant |
| 4,660 | ||
| G751-2P1F | Global Mixed-Mode Technology Inc | RoHS : Compliant |
| 2,150 | ||
| RLM-751-2WL+ | Mini-Circuits | LIMITER 3 - 750 MHZ, 50 / RF IC Limiter General Purpose 3MHz ~ 750MHz RoHS : Compliant |
| 1,900 | ||
| C3M0075120D | Wolfspeed | SICFET N-CH 1200V 30A TO247-3 / N-Channel 1200 V 30A (Tc) 113.6W (Tc) Through Hole TO-247-3 RoHS : Compliant |
| 1,800 | ||
EPM7512AEQI208-10N![]() | Altera Corporation | IC CPLD 512MC 10NS 208QFP RoHS : Compliant |
| 820 | ||
AD7512DITQ![]() | Analog Devices Inc | Protected Analog Switches RoHS : Not Compliant |
| 300 | ||
![]() Wuhan P&S | VS-E5PH7512L-N3 | Vishay Intertechnologies | Hyperfast Rectifier, 75 A FRED Pt G5 RoHS : Compliant |
| 64,000 | |
| VLMU35CT20-275-120 | Vishay Intertechnologies | UVC Emitting Diode in SMD Package RoHS : Compliant |
| 1,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |