| Electronic Components Datasheet Search |
|
7550L-AB3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | BU97550KV-ME2 | ROHM Semiconductor | 车载用低Duty LCD段码驱动器 RoHS : Compliant |
| 2,100 | |
TPS75501KTTR![]() | Texas Instruments | RoHS : Compliant | 1,000 | |||
| 1EDN7550BXTSA1 | Infineon Technologies AG | IC: driver; single transistor; low-side,gate driver; EiceDRIVER™ RoHS : Compliant | 936 | |||
| AP7375-50W5-7 | Diodes Incorporated | RoHS : Compliant | 18 | |||
![]() ComSIT USA | M075504C001 | IMESA | AVAILABLE EU | 2 | ||
| MECH0375501 | INTERPLEX GLOBAL TRADING PTE | AVAILABLE EU | 4,267 | |||
| SA4SFL755010 | TECAN | AVAILABLE EU | 188 | |||
![]() ComSIT USA | B57550G1103F | TDK Electronics | NTC THERMISTOR FOR TEMPERATURE MEASUREMENT NTC Thermistor, 10000ohm, Through Hole Mount RoHS : Compliant | 4,000 | ||
| 168755002 | Kaschke Components GmbH | Electronic Component RoHS : Not Compliant | 2,287 | |||
| B57550G103F2 | TDK Electronics | GLASS-ENCAPSULATED SENSOR FOR TEMPERATURE MEASUREMENT NTC Thermistor, 10000ohm, Through Hole Mount RoHS : Compliant | 1,000 | |||
| MIC287550YMTT5 | Micrel Inc | Electronic Component RoHS : Compliant | 100 | |||
| DE375501N21A | IXYS Corporation | RF POWER MOSFET RF Power Field-Effect Transistor, 1-Element, Very High Frequency Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 20 | |||
![]() NexGen Digital | MIC3975-5.0BMM | Micrel Inc | RoHS : Not Compliant | 1,454 | ||
![]() Avnet Silica | TCN75-5.0MUA | Microchip Technology Inc | (Alt: TCN75-5.0MUA) RoHS : Compliant | 0 | ||
| LM2575-5.0WU | Microchip Technology Inc | 1A STEPDOWN SMPS REGULATOR (Alt: LM2575-5.0WU) RoHS : Compliant | 0 | |||
| MIC4575-5.0WU | Microchip Technology Inc | 200KHZ 10A STEPDOWN REGULATOR (Alt: MIC4575-5.0WU) RoHS : Compliant | 0 | |||
| BU97550KV-ME2 | ROHM Semiconductor | MultiFunction LCD Segment Driver 66segx8COM 27V to 60V Supply Voltage 3Wire Serial Interface 80 (Alt: BU97550KV-ME2) RoHS : Compliant | 0 | |||
| MIC4575-5.0WT | Microchip Technology Inc | 200KHZ 10A STEPDOWN REGULATOR (Alt: MIC4575-5.0WT) RoHS : Compliant | 0 | |||
| AP7375-50SA-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 3 V to 45 V Single Output 350 mV Drop 5 V 300 mA 3 Pins SOT23 (Alt: AP7375-50SA-7) RoHS : Compliant | 0 | |||
| AP7375-50W5-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 3 V to 45 V Single Output 350 mV Drop 5 V 300 mA 5 Pins SOT25 (Alt: AP7375-50W5-7) RoHS : Compliant | 0 | |||
| MIC3975-5.0YMM | Microchip Technology Inc | 750MA UCAP LDO IN POWER (Alt: MIC3975-5.0YMM) RoHS : Compliant | 0 | |||
| FXPS7550DI4ST1 | STMicroelectronics | (Alt: FXPS7550DI4ST1) RoHS : Compliant | 0 | |||
| TCN75-5.0MUA713 | Microchip Technology Inc | (Alt: TCN75-5.0MUA713) RoHS : Compliant | 0 | |||
| 5962R9675503VXC | Renesas Electronics Corporation | (Alt: HS9-565BEH-Q) RoHS : Compliant | 0 | |||
| TCN75-5.0MOA713 | Microchip Technology Inc | (Alt: TCN75-5.0MOA713) RoHS : Compliant | 0 | |||
MIC2875-5.0YMT-TR![]() | Microchip Technology Inc | (Alt: MIC2875-5.0YMT-TR) RoHS : Compliant | 0 | |||
| MIC3975-5.0YMM-TR | Microchip Technology Inc | (Alt: MIC3975-5.0YMM-TR) RoHS : Compliant | 0 | |||
| L150-40755006000S0 | Lumileds | LUXEON 5050 Square Les Neutral White6VCCT 4000K CRI75 (Alt: L150-40755006000S0) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 775500000 | C&K Switches | IN STOCK SHIP TODAY |
| 2,000 | |
| 75504-F-H-10A | Beau Tech | IN STOCK SHIP TODAY |
| 450 | ||
| 86093487614755000E1 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 223 | ||
| 747550-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| 0275.500V | Littelfuse Inc | IN STOCK SHIP TODAY |
| 14 | ||
| HE1202755000E2 | IN STOCK SHIP TODAY | 9 | ||||
| 04775-50 | Cole-Palmer | IN STOCK SHIP TODAY |
| 6 | ||
| 2001-7550-00 | MACOM | IN STOCK SHIP TODAY |
| 5 | ||
| 1755027-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 5 | ||
| CBD13W3F20JVLX-755.0 | Amphenol Positronic | IN STOCK SHIP TODAY | 1 | |||
| 86093967113755000E1 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() Flip Electronics | FXPS7550DS4T1 | NXP Semiconductors | Stock RoHS : Compliant | 12,000 | ||
![]() Neutron USA | 2847550000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AL4C 2.5 YL RoHS : Compliant |
| 50 | |
| 9457550000 | Weidmüller Interface GmbH & Co. KG | Circular Metric Connectors SAIS-4/7 RoHS : Compliant |
| 50 | ||
| 755-00/28 | Qualtek Electronics Corporation | AC Power Entry Modules SCREW MT SLDR TAB |
| 50 | ||
| 3037550000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks SL3C 10 PE PE terminal, SNAP IN, Green/yellow, 10 mm, 1000 V, Number of connections: 3, Number of levels: 1, TS 35, V-0, Wemid RoHS : Compliant |
| 50 | ||
| 157.5917.5501 | Littelfuse Inc | Specialty Fuses Fuse -Strip 60 9MM w/Housing 48VDC, 50A RoHS : Compliant |
| 50 | ||
| HS75 50R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 75W 50 ohm1% |
| 21 | ||
| HSC7550KK | TE Connectivity | Wirewound Resistors - Chassis Mount HSC75 50K 10% RoHS : Compliant |
| 14 | ||
| 9537550000 | Weidmüller Interface GmbH & Co. KG | Fuse Holder Accessories SIHA 1/G20 RoHS : Compliant |
| 8 | ||
| K75504US | Kensington Computer Products Group | MULTI-DEVICE DUAL WLS COMPACT KYBD SLVR |
| 0 | ||
| K75507WW | Kensington Computer Products Group | MY430 RECHARGEABLE MOUSE MY430 RECHARGEABLE MOUSE BLK |
| 0 | ||
| CBMWD7550 | StarTech | SLOTTED WIRING CABLE REACEWAY DUCT - 75 X 50MM |
| 0 | ||
| 2707550 | Phoenix Contact | Enclosures, Boxes, & Cases ME 22,5 UT BUS/5 BK RoHS : Compliant |
| 0 | ||
| K75505US | Kensington Computer Products Group | WIRED COMPACT KEYBOARD W/ LIGHTNING CONNECTOR |
| 0 | ||
| 1887550000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LSF-SMT 3.50/02/135 1.5SN BK RL RoHS : Compliant |
| 0 | ||
| K75501WW | Kensington Computer Products Group | PRO FIT ERGO VERTICAL WIRELESS MOUSE |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2275-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 19.7 inches. BNC Male to N Male Right Angle Cable 19.7 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to N male right angle cable 19.7 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N male right angle cable 19.7 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle N type cable connection on the other. Our BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This BNC to type N cable is a male to male coax assembly, PE3C2275-50CM, can also be known as a BNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C2275-50CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2275-50CM can also be used in the other direction and will be right angle N type male to BNC male cable assembly if the opposite connectivity is required. BNC plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male right angle cable 19.7 inch length using LMR-240 coax. |
| 1,554 | |
| PE3W17875-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17875-50CM can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17875-50CM RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 plug to NEX10 jack cable assembly PE3W17875-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17875-50CM can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3C6175-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 4.3-10 Male to 4.3-10 Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-250-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6175-50CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly PE3C6175-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-250-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-250-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-250-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 80 | ||
| PE3C6375-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Fire Rated N Male to N Male Right Angle Low PIM Cable 50 cm Length Using SPF-500 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N male right angle low PIM cable 50 cm length using SPF-500 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N male right angle low PIM cable 50 cm length using SPF-500 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPO500-NM-LP type N to TC-SPO500-NM-RA-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPO500-NM-LP type N cable connection on one end and right angle TC-SPO500-NM-RA-LP type N cable connection on the other. Our low PIM TC-SPO500-NM-LP type N to right angle TC-SPO500-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPO500-NM-LP type N to TC-SPO500-NM-RA-LP N type cable is a male to male coax assembly, PE3C6375-50CM, can also be known as a low PIM TC-SPO500-NM-LP type N plug to right angle TC-SPO500-NM-RA-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPO500-NM-LP type N plug to TC-SPO500-NM-RA-LP type N plug cable assembly PE3C6375-50CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPO500-NM-LP N cable assembly is manufactured with TC-SPO500-NM-LP type N to right angle TC-SPO500-NM-RA-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPO500-NM-LP type N male to TC-SPO500-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6375-50CM can also be used in the other direction and will be right angle TC-SPO500-NM-RA-LP type N male to TC-SPO500-NM-LP N type male cable assembly if the opposite connectivity is required. Low PIM TC-SPO500-NM-LP type N plug to TC-SPO500-NM-RA-LP N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPO500-NM-LP type N to TC-SPO500-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPO500-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male right angle low PIM cable 50 cm length using SPF-500 coax using Times Microwave parts. |
| 70 | ||
| PE3C5875-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum QMA Male to QMA Male Right Angle Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum QMA male to QMA male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum QMA male to QMA male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C5875-50CM, can also be known as a low PIM QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C5875-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM QMA male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5875-50CM can also be used in the other direction and will be right angle QMA male to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum QMA male to QMA male right angle low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3W03175-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Female Bulkhead to SMA Male Right Angle Cable 50 cm Using PE-SR405FLJ Coax., Radio frequency assembly TNC female bulkhead to SMA male right angle cable 50 cm using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male right angle cable 50 cm using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle SMA cable connection on the other. Our TNC to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W03175-50CM, can also be known as a TNC jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W03175-50CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03175-50CM can also be used in the other direction and will be right angle SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male right angle cable 50 cm using PE-SR405FLJ coax. |
| 10 | ||
| PE3C7875-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Snap-On QMA Male Right Angle to QMA Female Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly snap-on QMA male right angle to QMA female low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on QMA male right angle to QMA female low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and QMA cable connection on the other. Our low PIM right angle QMA to QMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to QMA cable is a male to female coax assembly, PE3C7875-50CM, can also be known as a low PIM right angle QMA plug to QMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA jack cable assembly PE3C7875-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with right angle QMA to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM QMA right angle male to QMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7875-50CM can also be used in the other direction and will be QMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low PIM QMA right angle plug to QMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on QMA male right angle to QMA female low PIM cable 50 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W17550 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Jack, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Female to Reverse Polarity TNC Jack Cable Using LMR-240-UF Coax. PE3W17550 is a BNC female to reverse polarity TNC jack cable using LMR-240-UF coax. This Pasternack BNC female to reverse polarity TNC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our female BNC to reverse polarity jack TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17550 BNC female to TNC reverse polarity jack cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| TC-400-NM-75/50 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: None, Interface Type 1: LMR-400-75, Interface Type 2: LMR-400-75-DB, Interface Type 3: LMR-400-75-FR. 75 Ohm N Male Connector Crimp Attachment for LMR-400-75, LMR-400-75-DB, LMR-400-75-FR. TC-400-NM-75/50 Type N male coaxial connector has an interface type of Type N male which is compatible with LMR-400-75, LMR-400-75-DB and LMR-400-75-FR cables and has an impedance of 75 Ohms. Pasternack's Type N male connector uses crimp as an attachment method. This Type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack Type N male coaxial connector has a PTFE dielectric type. Pasternack's Type N coaxial connector has a brass body with nickel plating. Our TC-400-NM-75/50 Type N connector uses a gold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This Type N connector has a gold inner contact plating. Our Type N male connector has a length of 0.83 inches, a width of 0.83 inches, and a weight of 0.09 lbs. This Pasternack male Type N connector will ship the same business day as purchased. Our Type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07550LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Right Angle Bulkhead to BNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W07550LF/HS is a 1.0/2.3 jack right angle bulkhead to BNC male cable using RG58 coax. This Pasternack 1.0/2.3 jack right angle bulkhead to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. 1.0/2.3 right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack 1.0/2.3 right angle bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07550LF/HS 1.0/2.3 jack right angle bulkhead to BNC male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C7550 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C6575-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. BNC Female to BNC Female Cable 50 cm Length Using RG316-DS Coax., Radio frequency assembly BNC female to BNC female cable 50 cm length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to BNC female cable 50 cm length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3C6575-50CM, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3C6575-50CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to BNC female cable 50 cm length using RG316-DS coax. |
| 0 | ||
| PE3C7975-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. QMA Male Right Angle to QMA Male Right Angle Low PIM Cable 50 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male right angle to QMA male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male right angle to QMA male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM right angle QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C7975-50CM, can also be known as a low PIM right angle QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C7975-50CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with right angle QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA right angle male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA right angle plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to QMA male right angle low PIM cable 50 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8275-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 4.1/9.5 Mini DIN Female to 4.3-10 Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a female to male coax assembly, PE3C8275-50CM, can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly PE3C8275-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8275-50CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3M0175-500CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 196.85 inches. Temperature Conditioned N Male to N Female Bulkhead Low Loss Cable 500 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N female bulkhead low loss cable 500 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0175-500CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with N type connection on one end and type N connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly. PE3M0175-500CM can also be known as a temperature conditioned low loss type N plug to N type jack cable assembly and will be shipped the same day after it is purchased. type N plug to type N jack cable assembly PE3M0175-500CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible N type cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency type N male to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0175-500CM can be used in the other direction and will be type N female to N type male cable assembly. Pasternack high reliability low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for same-day shipment worldwide. Variations of PE44825 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N female bulkhead low loss cable 500 cm length using PE-P142LL coax. |
| 0 | ||
![]() Vyrian | V62/04755-05YE![]() | Texas Instruments | Operational Amplifier, 4 Func, 850uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 9,559 | ||
V62/04755-01XA![]() | Texas Instruments | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 9,484 | |||
V62/04755-07XE![]() | Texas Instruments | Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 9,008 | |||
V62/04755-01XE![]() | Texas Instruments | Operational Amplifier, 1 Func, 400uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 8,736 | |||
V62/04755-06YA![]() | Texas Instruments | Operational Amplifier, 1 Func, 1200uV Offset-Max, BIPolar, PDSO16 RoHS : Not Compliant | 8,359 | |||
V62/04755-04XA![]() | Texas Instruments | Operational Amplifier, 1 Func, 700uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 7,410 | |||
V62/04755-02XE![]() | Texas Instruments | Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 6,826 | |||
| TMC57550AAATR | Texas Instruments | 6,675 | ||||
V62/04755-05YA![]() | Texas Instruments | Operational Amplifier, 1 Func, 950uV Offset-Max, BIPolar, PDSO16 RoHS : Not Compliant | 6,620 | |||
V62/04755-03XA![]() | Texas Instruments | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 5,982 | |||
| TMC57550AHATR | Texas Instruments | 4,648 | ||||
V62/04755-06YE![]() | Texas Instruments | Operational Amplifier, 4 Func, 1100uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 4,324 | |||
V62/04755-02XA![]() | Texas Instruments | Operational Amplifier, 1 Func, 700uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 4,034 | |||
V62/04755-04XE![]() | Texas Instruments | Operational Amplifier, 2 Func, 600uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 3,923 | |||
V62/04755-03XE![]() | Texas Instruments | Operational Amplifier, 2 Func, 400uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 3,035 | |||
![]() Win Source Electronics | HT7550-1 | Nexperia | SOT-89 MONITORS & RESET CIRCUITS / Linear Voltage Regulator IC Positive Fixed 1 Output 100mA SOT-89-3 |
| 86,975 | |
| 1EDN7550BXTSA1 | Infineon Technologies AG | IC GATE DRVR HIGH-SIDE SOT23-6 / High-Side Gate Driver IC Non-Inverting PG-SOT23-6 RoHS : Compliant |
| 70,770 | ||
| HT7550-2 | Holtek Semiconductor Inc | 100mA Low Power LDO |
| 54,274 | ||
| AP7375-50SA-7 | Diodes Incorporated | IC REG LIN 5V 300MA SOT23-3 RoHS : Compliant |
| 48,000 | ||
| FM17550-QNA-T-G | Shanghai Fudan Microelectronics Group Co Limited | ISO 14443A,ISO 14443B I2C,SPI,UART QFN-32-EP(5x5) RFID, RF Access, Monitoring ICs RoHS |
| 29,888 | ||
| AP7375-50Y-13 | Diodes Incorporated | IC REG LIN 5V 300MA SOT89 RoHS : Compliant |
| 15,000 | ||
| ADC1175-50 | Texas Instruments | ADC1175-50 8-Bit, 50 MSPS, 125 mW A/D Converternull |
| 13,050 | ||
| MT7550N/A | MediaTek |
| 12,160 | |||
| 1EDN7550B | Infineon Technologies AG | 1EDN7550 - GATE DRIVER / High-Side and Low-Side Gate Driver IC Inverting, Non-Inverting PG-SOT23-6-3 RoHS : Compliant |
| 9,000 | ||
| TLV75509PDBV | Texas Instruments | LDO Voltage Regulator 500mA 0.9V Fixed Output SOT-23-5 |
| 3,860 | ||
TLV75509PDBVR![]() | Texas Instruments | IC REG LINEAR 0.9V 500MA SOT23-5 / Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 RoHS : Compliant |
| 3,499 | ||
TPS75501KTTR![]() | Texas Instruments | IC REG LDO ADJ 5A DDPAK RoHS : Compliant |
| 2,770 | ||
ADC1175-50CIMTX/NOPB![]() | Texas Instruments | 1-Channel Single ADC Pipelined 50Msps 8-bit Parallel 24-Pin TSSOP T/R / IC ADC 8BIT 24-TSSOP RoHS : Compliant |
| 1,210 | ||
TPS75501KTTT![]() | Texas Instruments | IC REG LDO ADJ 5A DDPAK RoHS : Compliant |
| 700 | ||
TPS75501KTT![]() | Texas Instruments | FAST-TRANSIENT RESPONSE 5-A LOW-DROPOUT VOLTAGE REGULATORS RoHS : Not Compliant |
| 683 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |