| Electronic Components Datasheet Search |
|
7610.. Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 3473-7610 | 3M Interconnect | Wiremount Socket .1" x .1" .05"Pitch 10Contact Clsd end Centerbump and Military | 3M 3473-7610 RoHS : Compliant |
| 2,302 | |
| 24-9574-7610 | Kester | WireClean Spool K100LD 227°C RoHS : Compliant |
| 64 | ||
| 24-7068-7610 | Kester | Sn96.5Ag03Cu.5 3.3%/275 Flux-Cored Solder Wire - 0.50mm (0.020") Dia - 1lb Spool - No-Clean - Lead-Free RoHS : Compliant |
| 59 | ||
| 393-7610-910 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 393-7610-910 RoHS : Compliant |
| 10 | ||
| 7610 | Heyco | JHB-105-8-L/R RoHS : Compliant |
| 0 | ||
| 7610 | Pelican Products Inc | RoHS : Compliant |
| 0 | ||
| 7610-6002PL | 3M Interconnect | 7610-6002 Pl 3M 7610-6002 Pl Wannenstifts RoHS : Compliant |
| 0 | ||
| 63808-7610 | Molex | FA2 APPLICATOR - PNEUMATIC FEED RoHS : Compliant |
| 0 | ||
| 7610-BSS | Marinco Electrical Group | Solenoid SI Series 120A 12/24V ACR RoHS : Compliant |
| 0 | ||
| SR-7610 | TE Connectivity | SR-7610=M39016/40-010 |
| 0 | ||
| 38630-7610 | Molex | SR BTS PC 50 10 ASY RoHS : Compliant |
| 0 | ||
| 80-6100-7610-3 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 7610-5002-PL | 3M Interconnect | 76xxx series, MIL Compliant RoHS : Compliant |
| 0 | ||
| 25-7068-7610 | Kester | SN96.5AG03CU.5 3.3%/275 RoHS : Compliant |
| 0 | ||
| JE-1503-7610-9 | 3M Interconnect | 3M CAMERA LINK INDUSTRIAL RoHS : Compliant |
| 0 | ||
![]() Verical | 7610-6002PL | 3M Interconnect | Conn Board to Board HDR 10 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 5,514 | |
| 7610D2 | Visual Communications Company | LED Light Pipe Rectangular Right Angle Clear Rigid Bag RoHS : Compliant |
| 1,655 | ||
| 7610-6002PL | 3M Interconnect | Conn Board to Board HDR 10 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 1,376 | ||
| 761-0811-N13 | Corsair Electrical Connectors Inc | 761-0811-N13 |
| 66 | ||
| 7610-5002 PL | 3M Interconnect | Conn Board to Board HDR 10 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 33 | ||
| 761-0810-N13 | Corsair Electrical Connectors Inc | 761-0810-N13 |
| 3 | ||
![]() Avnet Americas | 501876-1040 | Molex | Pin Header, 10 Contacts, 2 Rows, 2mm, Tin, 2A, Right Angle, Shrouded, Brass, Signal, THT RA - Trays (Alt: 5018761040) RoHS : Compliant |
| 16,275 | |
| 1761014-3 | TE Connectivity | - Bag (Alt: 1761014-3) RoHS : Compliant |
| 6,610 | ||
| 87761-0006 | Molex | - Trays (Alt: 0877610006) RoHS : Compliant |
| 6,000 | ||
| 15-47-7610 | Molex | - Rail/Tube (Alt: 0015477610) RoHS : Compliant |
| 1,296 | ||
PIC16C76-10/SO![]() | Microchip Technology Inc | MCU 8-bit PIC16 PIC RISC 14KB EPROM 5V 28-Pin SOIC W Tube - Rail/Tube (Alt: PIC16C76-10/SO) RoHS : Compliant |
| 122 | ||
| 1SNL407610R0000 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1SNL407610R0000) RoHS : Not Compliant |
| 100 | ||
| BMR4576100/002 | Flex Ltd | - Trays (Alt: BMR4576100/002) RoHS : Compliant | 93 | |||
| 1761011-3 | TE Connectivity | - Trays (Alt: 1761011-3) RoHS : Compliant |
| 90 | ||
PIC16C76-10/SP![]() | Microchip Technology Inc | MCU 8-bit PIC16 PIC RISC 14KB EPROM 5V 28-Pin SPDIP Tube - Rail/Tube (Alt: PIC16C76-10/SP) RoHS : Compliant |
| 4 | ||
| M28776/1-025P | TE Connectivity | - Bulk (Alt: 1-1617164-1) RoHS : Compliant |
| 1 | ||
| CWR29NH105KCEC42527610 | KEMET Corporation | 1.00UF 50.0V - Custom Tape W/Leader (Alt: CWR29NH105KCEC42527610) RoHS : Not Compliant |
| 0 | ||
| CWR09KB225KP7610 | KEMET Corporation | 2.20UF 25.0V - Bulk (Alt: CWR09KB225KP7610) RoHS : Not Compliant |
| 0 | ||
| CWR11FC336MB7610 | KEMET Corporation | 33.0UF 10.0V - Bulk (Alt: CWR11FC336MB7610) RoHS : Not Compliant |
| 0 | ||
| CWR11HH226KC7610 | KEMET Corporation | - Bulk (Alt: CWR11HH226KC7610) RoHS : Not Compliant |
| 0 | ||
| CWR11NH105KCC42527610 | KEMET Corporation | 1.00UF 50.0V - Bulk (Alt: CWR11NH105KCC42527610) RoHS : Not Compliant |
| 0 | ||
![]() Arrow Electronics | 7610-6002PL | 3M Interconnect | Conn Board to Board HDR 10 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 1,376 | |
| 7610-6002BL | 3M Interconnect | 7610-6002BL |
| 1 | ||
![]() Newark | 1376109-1 | TE Connectivity | Automotive Contact, Pin, Crimp; |Te Connectivity Amp 1376109-1 RoHS : Compliant |
| 44,788 | |
| 1376109-1 | TE Connectivity | Automotive Contact, Pin, Crimp; |Te Connectivity Amp 1376109-1 RoHS : Compliant |
| 44,788 | ||
| 1376109-1 | TE Connectivity | Automotive Contact, Pin, Crimp; Product Range:Th 025 Series; Contact Gender:Pin; Contact Termination Type:Crimp; Wire Size Awg Max:-; Wire Size Awg Min:-; For Use With:Amp Th 025 Series Housing Connectors; Contact Plating:Tin Rohs Compliant: Yes RoHS : Compliant |
| 43,502 | ||
| BFC247076104 | Vishay Intertechnologies | Cap, 0.1?f, 63V, 5%, Pet; |Vishay BFC247076104 RoHS : Compliant |
| 6,226 | ||
| 875075761005 | Wurth Elektronik | Polymer Cap, 47Uf, 20%, 50V, Smd; |Würth Elektronik 875075761005 RoHS : Compliant |
| 295 | ||
| 744761043A | Wurth Elektronik | Wirewound Inductor, 4.3Nh, 0.7A, 0603; |Würth Elektronik 744761043A RoHS : Compliant |
| 207 | ||
| 744761043A | Wurth Elektronik | Wirewound Inductor, 4.3Nh, 0.7A, 0603; |Würth Elektronik 744761043A RoHS : Compliant |
| 207 | ||
| 934076104 | Hirschmann Electronics GmbH & Co Kg | Test Lead, 4Mm Banana Plug, Green, 2M; |Hirschmann Test And Measurement 934076104 RoHS : Compliant |
| 28 | ||
| 934176103 | Hirschmann Electronics GmbH & Co Kg | Test Lead, 4Mm Banana Plug, Yellow, 2M; |Hirschmann Test And Measurement 934176103 RoHS : Compliant |
| 23 | ||
| 76-100 | SPC Multicomp | 4Mm Banana Plug-Jack, Black, 500Mm; |Multicomp Pro 76-100 (Alternate Part Number: 3760122596092 RoHS : Compliant |
| 20 | ||
| 76-101 | SPC Multicomp | 4Mm Banana Plug-Jack, Red, 500Mm; |Multicomp Pro 76-101 (Alternate Part Number: 3760122596108 RoHS : Compliant |
| 4 | ||
| FMHR0176-100CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMHR0176-100CM RoHS : Not Compliant |
| 3 | ||
| DG57BM-5021-76-1012-R | DURAKOOL | |Durakool DG57BM-5021-76-1012-R RoHS : Compliant |
| 3 | ||
| FAA-GSK-4.76-100-NP-2.0-C4-T-J | Labfacility Limited | Thermocouple, Type K, 2M, 350Deg C; |Labfacility FAA-GSK-4.76-100-NP-2.0-C4-T-J RoHS : Compliant |
| 2 | ||
| FMCA2976-100CM | Fairview Microwave Inc | 3.5Mm Male-3.5Mm Male Cbl Tinned Alu; |Fairview Microwave FMCA2976-100CM RoHS : Not Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX17610ATC+T | Analog Devices Inc | Industrial 1A Over-current and RoHS : Compliant |
| 90,892 | |
| MAX17610ATC+ | Analog Devices Inc | Industrial 1A Over-current and RoHS : Compliant | 148 | |||
| MAX17610EVKIT# | Analog Devices Inc | EVKIT for MAX17610 Industrial |
| 13 | ||
AD7610BCPZ![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 250K RoHS : Compliant |
| 10 | ||
AD7610BSTZ![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 500K RoHS : Compliant |
| 8 | ||
AD7610BCPZ-RL![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 500K RoHS : Compliant |
| 0 | ||
AD7610BSTZ-RL![]() | Analog Devices Inc | 16-BT Bipolar Pulsar ADC, 250K RoHS : Compliant |
| 0 | ||
![]() RS | FTD76-10-D | Panduit Corp | POLY INSULATED FERRULESTWIN WIRE GRAYDIN COLOR 18 AWG .39" PIN LENGTH. RoHS : Compliant |
| 934 | |
| 1761055 | RS Pro | MALE PLUG - BSPP 1/4 |
| 150 | ||
| 1761048 | RS Pro | MALE PLUG WITH NBR ORING - BSPP 1/8 |
| 96 | ||
| BD-276-10 (BD276) | Nyco Products | FLEXIBLE URINAL SCREEN, DEODORIZING, ODOR CONTROL, TROPICAL SCENT, MARVALOSA |
| 40 | ||
| 1761004 | RS Pro | REDUCER - BSPP 1/8-1/4 |
| 20 | ||
| SV7610 (SVN34XXXIRKG/US-100) | ifm efector inc | VORTEX METER, TFT DISPLAY, 1.3-26.4 GPM, 4WIRE DC DUAL PNP/NPN, 3/4NPT CONNECTIO |
| 16 | ||
| 1761061 | RS Pro | FEMALE TEE 3/8 |
| 10 | ||
| 7976103 | RS Pro | HEX SOCKET BUTTON STAINLESS STEEL PLAIN SOCKET SCREW M8X30MM |
| 7 | ||
| DFSP-32-25-DS-PA (576101) | Festo | STOPPER CYLINDER, 32X25MM STROKE, DBL ACT, ELASTIC CUSH, SENSOR READY, STD ROD |
| 7 | ||
| 05007610001 (007610) | Wera Werk Hermann Werner GmbH & Co. KG | 0.8 X 5.0 X 100MM SLOTTED DRIVER FOR SLOTTED SCREWS, KRAFTFORM PLUS,300 SERIES |
| 4 | ||
| B7610 | BURNDY | BW BCRE2 3/0 AWG - 5R |
| 3 | ||
| 5316 (7000027610) | 3M | MOTOR LEAD PIGTAIL SPLICE 5316, 5-8 KV, NON-SHIELDED |
| 2 | ||
| OZXB2 (1SCA022119R7610) | ABB Low Voltage Products and Systems | TERMINAL CLAMP SET |
| 2 | ||
| 53761-04 | Norgren | SOLENOID, AC,110/50,120/60 |
| 1 | ||
| FLUKE-700G30 (4097610) | Fluke Calibration | METER, GAUGE, PRESSURE, DIGITAL, 5, 000PSIG |
| 1 | ||
![]() Microchip Technology Inc | PIC16C76-10/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 8K OTP, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 1,844 | |
PIC16C76-10I/SP![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 8K OTP, SPDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 840 | ||
| BC11576-1000 | Microchip Technology Inc | BNC 'D' CONNECTOR TO BNC, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
PIC16C76-10/SO![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 8K OTP, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
PIC16C76-10I/SO![]() | Microchip Technology Inc | MCU CMOS 28 LD 10MHZ 8K OTP, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| EX-4210-DEA-1076-100M000000 | Microchip Technology Inc | EX-4210-DEA-1076-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| EX-4210-DEE-1076-100M000000 | Microchip Technology Inc | EX-4210-DEE-1076-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| OX-2051-DEE-2076-100M000000 | Microchip Technology Inc | OX-2051-DEE-2076-100M000000, Projected EOL: 2051-04-04 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 310-0761-030 | Superior Washer & Gasket Company | 3,552 | |||
| FTD76-10-D | Panduit Corp | RoHS : Compliant | 500 | |||
| 2276-1032-SS | RAF Electronic Hardware | 417 | ||||
| 310-0761-030 | Seastrom Mfg | 146 | ||||
| 09-8176-1-03 | Staffall | 142 | ||||
| 09-9076-1-03 | Staffall | 56 | ||||
| 4176-1032-B | RAF Electronic Hardware | 52 | ||||
| 76-102 | MISC. INDUSTRIAL HRD | 29 | ||||
| 1276-10-SS | RAF Electronic Hardware | 20 | ||||
| CA1376-10-3-12 | Alcoa Fastening Systems Aerospace | 10 | ||||
| 9761080 | PINS | 5 | ||||
| NAS77-6-100 | NAS Bearings/Bushings | 4 | ||||
| 476-103 | HH Smith | 2 | ||||
| 8176-1032-A-24 | RAF Electronic Hardware | 2 | ||||
| M28876/10BDW | MIL-SPEC Connectors | 1 | ||||
![]() Rochester Electronics | BUK7610-55AL,118![]() | NXP Semiconductors | MOSFET N-Channel 55V 75A (Tc) TO-263-3 T/R RoHS : Compliant |
| 69 | |
| BD17610STU | onsemi | PNP Epitaxial Silicon Transistor RoHS : Compliant |
| 5,660 | ||
AD7610BSTZ![]() | Analog Devices Inc | IC ADC 1 CONV 16Bits SAR DSP, MICROWIRE, QSPI, SPI 48-QFP Tray RoHS : Compliant |
| 36 | ||
5962-87610012A![]() | Texas Instruments | NAND Gate, AC Series, 3-Func, 3-Input, CMOS, CQCC20 RoHS : Not Compliant |
| 40 | ||
| SN761024DL | Texas Instruments | ANALG CONS AUDIO/VID RoHS : Not Compliant |
| 4,712 | ||
5962-8761001CA![]() | Texas Instruments | NAND Gate, AC Series, 3-Func, 3-Input, CMOS, CDIP14 RoHS : Not Compliant |
| 69 | ||
| PCI7610GHK | Texas Instruments | PCMCIA Bus Controller, CMOS, PBGA209 RoHS : Not Compliant |
| 732 | ||
| TRF7610PWP | Texas Instruments | Wide Band High Power Amplifier, 800MHz Min, 1000MHz Max RoHS : Not Compliant |
| 261 | ||
PCI7610PDV![]() | Texas Instruments | PCMCIA Bus Controller, CMOS, PQFP208 RoHS : Compliant |
| 165 | ||
| ACS37610LLUATR-020B5-T1 | Allegro MicroSystems LLC | CORELESS, HIGH PRECISION, HALL-EFFECT CURRENT SENSOR IC |
| 2,536 | ||
| ACS37610LLUATR-050B5 | Allegro MicroSystems LLC | Current Sensor ICs Hall Effect AC/DC Analog Voltage 8-SOP RoHS : Compliant |
| 4,000 | ||
| BD17610STU | Fairchild Semiconductor Corporation | PNP Epitaxial Silicon Transistor RoHS : Compliant |
| 19,332 | ||
| FDML7610AS | Fairchild Semiconductor Corporation | 2-Element, N-Channel, MOSFET RoHS : Compliant |
| 9,654 | ||
| FDML7610S | Fairchild Semiconductor Corporation | MOSFET 2 N-Channel 30V 12A, 17A 8-SON T/R RoHS : Compliant |
| 41 | ||
HUF76107D3S![]() | Fairchild Semiconductor Corporation | 20A, 30V, 0.08ohm, N-Channel Power MOSFET, TO-252AA RoHS : Not Compliant |
| 1,050 | ||
![]() Sager | 9757610094 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| 9761003110 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761003147 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761004001 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761004119 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761005136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761006072 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761006108 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761006153 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761007044 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761007125 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761008016 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761008061 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761008142 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761009033 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 15-47-7610 | Molex | Connector: wire-board; male; PIN: 10; 2.5A; 250V; straight; 2.54mm RoHS : Compliant |
| 1,728 | |
| 1761028-1 | TE Connectivity | 1761028-1 RoHS : Compliant |
| 644 | ||
| 1776100000 | Weidmüller Interface GmbH & Co. KG | End piece; blue; wemid RoHS : Compliant |
| 18 | ||
| 11102761-00 | TE Connectivity | Converter: pressure |
| 2 | ||
| 004176105 | ETI Polam | Fuse: fuse; NH4a; ceramic,industrial; 630A; 690VAC; 250VDC; gG |
| 0 | ||
| 076-1-004-3-C4DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP4; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-006-3-C1DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP6; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-014-3-C4DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP14; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-016-3-C1DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP16; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-024-3-C4DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP24; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-028-4-C1DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP28; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 076-1-048-6-C3DTF-LT0 | MPE-Garry GmbH | Socket: integrated circuits; DIP48; Pitch: 2.54mm; precision; THT |
| 0 | ||
| 1767610 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 3077610000 | Weidmüller Interface GmbH & Co. KG | Comb bridge; orange; wemid; 29.6mm RoHS : Compliant |
| 0 | ||
| 61.7610-27 | Stäubli Electrical Connectors | Wire; Silivolt®-1V; 1x2.5mm2; stranded; Cu; silicone; brown; 1.5kV |
| 0 | ||
![]() Ameya Holding Limited | BH76106HFV-TR![]() | ROHM Semiconductor | Compact, Low Current consumption Single Output Video Drivers RoHS : Compliant |
| 6,300 | |
BH76109HFV-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
![]() ComSIT USA | BFC237076105 | Vishay Intertechnologies | DC FILM CAPACITOR Film Capacitor, Polyester, 63V, 5% +Tol, 5% -Tol, 1uF, Through Hole Mount, 2824 RoHS : Compliant | 4,500 | ||
| 17610285 | TE Connectivity | RECEPTACLE ASSEMBLY, SHIELDED, RIGHT ANGLE, RAILED, .050 SERIES, AMPLIMITE Telecom and Datacom Connector, 100 Contact(s), Female, Right Angle, Solder Terminal, #2-56, Receptacle RoHS : Compliant | 2,644 | |||
| BUK7610100B | Philips Semiconductors | N-CHANNEL TRENCHMOS STANDARD LEVEL FET Power Field-Effect Transistor, 75A I(D), 100V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 1,580 | |||
| MAL215376101E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3131 RoHS : Compliant | 1,500 | |||
| BFC247076105 | Vishay Intertechnologies | Film Capacitor, Polyester, 63V, 5% +Tol, 5% -Tol, 1uF, Through Hole Mount RoHS : Compliant | 1,500 | |||
| HUF76107D3ST | HARTING Technology Group | 20A, 30V, 0.052 OHM, N-CHANNEL, LOGIC LEVEL ULTRAFET POWER MOSFET Power Field-Effect Transistor, 20A I(D), 30V, 0.08ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Not Compliant | 1,425 | |||
| TEA7610SP | SGS Semiconductor Ltd | LOW-DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 10V, 0.8V Dropout, PSFM3 RoHS : Not Compliant | 600 | |||
| 50827610CATD | Avago Technologies | 7.6 MM (0.3 INCH) SEVEN SEGMENT DISPLAY Smart/Normal 7 Seg Numeric LED Display, 1-Character, High Efficiency Red, 7.62mm RoHS : Compliant | 234 | |||
| 2SK276101MR | Fuji Electric Co Ltd | N-CHANNEL SILICON POWER MOSFET Power Field-Effect Transistor, 10A I(D), 600V, 1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 139 | |||
| 930176103 | Hirschmann Electronics GmbH & Co Kg | SOCKET WITH INSULATED HEAD Interconnection Device RoHS : Not Compliant | 121 | |||
| MP7610BN | MSi | D/A Converter, 1 Func, Serial Input Loading, 30us Settling Time, PDIP28 RoHS : Not Compliant | 17 | |||
| A9F07610 | Schneider Electric | Thermal Magnetic Circuit Breaker RoHS : Compliant | 2 | |||
![]() Interstate Connecting Components | K1137610 | TE Connectivity | BATTERY DISCONNECTOR 35-524-23 RoHS : Not Compliant | 0 | ||
| 814761-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR54AB00-4022AI2 RoHS : Not Compliant | 0 | |||
| 761054-ZZ | TE Connectivity | 761054 | 0 | |||
| 248-1761-021 | ITT Interconnect Solutions | SHELL DPX2N-33B-0000 | 0 | |||
| 1376109-1 | TE Connectivity | 025 TAB CONT RoHS : Compliant |
| 0 | ||
| 10-551761-03P | Amphenol Aerospace | RECEPT 10-551761-03P | 0 | |||
| 10157376-10101LF | Amphenol FCi | 1.0MM PITCH, HEADER, VER-TICAL | 0 | |||
| 62GB77610416 | Amphenol PCD | 62GB | 0 | |||
| 248-1761-015 | ITT Interconnect Solutions | SHELL DPX2-33 B STABILIZED | 0 | |||
| 7-2176761-0 | TE Connectivity | RT 1J 0.2W 698K 0.1% 25PPM 5K RoHS : Unknown | 0 | |||
| 7-2837610-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-062F1 |
| 0 | ||
| 1761072-4 | TE Connectivity | RECPTHSSDC2FIBREON TAPE RoHS : Compliant |
| 0 | ||
| 248-1761-017 | ITT Interconnect Solutions | SHELL DPX2-33A-0300 STAB | 0 | |||
| 076-10005-02 | TE Connectivity | TEMPERATURE PROBE WITH 2 FOOT RoHS : Compliant |
| 0 | ||
| 04-0761-0011 | TE Connectivity | DV301-0050-111-1110 | 0 | |||
![]() PEI Genesis | 3287-6101 | Amphenol SV Microwave | RoHS : Compliant |
| 100 | |
| 957-7610 | Amphenol Corporation |
| 0 | |||
| 9M4.4279.761.04.15.46.V3 | Trafag Sensors and Controls |
| 0 | |||
| 10-729876-10H | Amphenol Corporation |
| 0 | |||
| 002761-0000 | ITT Interconnect Solutions |
| 0 | |||
| J176-104C-2.5C | SOURIAU-SUNBANK |
| 0 | |||
| CA3102E28A51PBA176-109 | ITT Interconnect Solutions |
| 0 | |||
| J1776-100S04MJ34-6 | SOURIAU-SUNBANK |
| 0 | |||
| 507-4538-0937-610 | Dialight |
| 0 | |||
| 6287610-2 | SOURIAU-SUNBANK |
| 0 | |||
| 002761-0002 | ITT Interconnect Solutions |
| 0 | |||
| J176-104-2.5A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-10N03 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-10N03 | Amphenol PCD |
| 0 | |||
| J1776-100T04M12-15 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | ZW-04-15-G-D-276-104 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 550 | |
| 1761015-3 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 476 | ||
| 1761028-3 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 395 | ||
| 673761-000 | TE Connectivity | Labels and Industrial Warning Signs |
| 383 | ||
| 227610-1 | TE Connectivity | Connectors |
| 48 | ||
| 76-1080-0670A | The Phoenix Company Of Chicago Inc | RF |
| 46 | ||
| 930176104 | Altech Corporation | Test Socket BIL 20 GREEN RoHS : Unknown |
| 38 | ||
| 1761007-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 32 | ||
| 87-477761-06P | Amphenol Corporation | RECEPT |
| 18 | ||
| EK4761-000 | TE Connectivity | Dust Cover |
| 15 | ||
| 71-197610-98P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 8 | ||
| 1477610001 | TE Connectivity | Connectors |
| 8 | ||
| 7-2837610-7 | TE Connectivity | Tools |
| 1 | ||
| 71-197610-98S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 1 | ||
| 797-610SN-153MEPB | Glenair Inc | PLUG CONNECTOR 153 POSITION |
| 1 | ||
![]() PUI | 476-102 | 40 | ||||
![]() Richardson RFPD | R404761000 | Radiall | Conn Type N 0Hz to 6GHz 50Ohm ST RCP Gold Over Nic RoHS : Compliant |
| 0 | |
| 1376109-1 | TE Connectivity | Contact PINCrimp STCable Mount 20-24AWG T/R RoHS : Compliant |
| 0 | ||
| 076-10005-02 | TE Connectivity | SENSOR, ULTRASONIC DISTANCE RoHS : Not Compliant |
| 0 | ||
| K752507610PM0D035 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| R139076100 | Radiall | Conn Coaxial 0Hz to 3GHz 75Ohm Crimp ST Panel Moun RoHS : Not Compliant | 0 | |||
| 076-10005-05 | TE Connectivity | SENSOR, ULTRASONIC DISTANCE RoHS : Not Compliant |
| 0 | ||
| 1761015-3 | TE Connectivity | Connector Accessories SFP Cage Right Angle Copper RoHS : Compliant | 0 | |||
| 76-10-21 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
AD7610BCPZ-RL![]() | Analog Devices Inc | 1-Channel Single ADC SAR 250ksps 16-bit Parallel/S RoHS : Compliant |
| 0 | ||
| R282761010 | Radiall | INTERCONNECT TOOL | 0 | |||
| BMR4576100/002 | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| 51-761-001 | Spectrum Control | .218HX 10-32 50V 123G 51000- RoHS : Not Compliant | 0 | |||
| 617610011 | Radiall | MULTIPIN CIRCONNECT RoHS : Compliant | 0 | |||
| MPN7610-E28X | MACOM | RF PIN DIODE RoHS : Compliant | 0 | |||
| 1367610-1 | TE Connectivity | Connector Accessories Guide Rail Right Angle Box/T RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 505476-1010 | Molex | INSTOCK | 1,115,400 | ||
| 68761-0676 | Molex | INSTOCK | 35,620 | |||
| 45776-1008 | Molex | INSTOCK | 20,930 | |||
| 10133476-10001LF | Amphenol Corporation | INSTOCK | 15,515 | |||
| HM76-10100JLFTR7 | INSTOCK | 12,350 | ||||
| 68761-0602 | Molex | INSTOCK | 8,320 | |||
| 68761-0741 | Molex | INSTOCK | 7,800 | |||
| SONT00017176-100 | INSTOCK | 6,120 | ||||
| 6010B0076101 | INSTOCK | 4,823 | ||||
| 2761008112 | Fair-Rite Products Corp | INSTOCK RoHS : Compliant | 3,851 | |||
| 1SNL407610R0000 | TE Connectivity | INSTOCK RoHS : Compliant | 2,990 | |||
| 1761007-1 | TE Connectivity | INSTOCK RoHS : Compliant | 2,899 | |||
| C76100 | Syfer Technology | INSTOCK | 2,500 | |||
| HM376105 | INSTOCK | 460 | ||||
| 787610-1 | TE Connectivity | INSTOCK RoHS : Compliant | 190 | |||
![]() Avnet Abacus | 5018761040 | Molex | Pin Header Signal 2 mm 2 Rows 10 Contacts Through Hole Right Angle iGrid 501876 (Alt: 5018761040) RoHS : Compliant | 17,780 | ||
| 1761014-3 | TE Connectivity | Cage SFP 1 x 2 Ganged Without Heat Sink Without Light Pipe Through Hole PressFit (Alt: 1761014-3) RoHS : Compliant | 6,090 | |||
| BFC247076104 | Vishay Intertechnologies | General Purpose Film Capacitor Metallized PET Radial Box 2 Pin 01 uF 5 40 V 63 V - Tape and Reel (Alt: BFC247076104) RoHS : Compliant | 4,000 | |||
| 1376103-1 | TE Connectivity | Automotive Connector Housing TH 025 Plug 24 Ways AMP TH 025 Series 13761091 Pin Contacts (Alt: 1376103-1) RoHS : Compliant | 1,200 | |||
| 1761007-2 | TE Connectivity | Connector Accessories 2Port SFP Cage Assembly With Light Pipe Kit Press Fit (Alt: 1761007-2) RoHS : Compliant | 990 | |||
| 116-87-610-41-006101 | PRECI-DIP SSA | Conn DIP Socket SKT 10 POS 254mm Solder ST ThruHole Card Box (Alt: 116-87-610-41-006101) RoHS : Compliant | 882 | |||
| 1761028-4 | TE Connectivity | Conn D Subminiature Receptacle 68 POS 127mm Solder RA Through Hole Tube (Alt: 1761028-4) RoHS : Compliant | 864 | |||
| RC422-076-101-3000 | Molex | AirBorn RC Series Rectangular BottomofStack Board Mount Connector Stackable 0075191mm Pitch (Alt: RC422-076-101-3000) RoHS : Compliant | 5 | |||
| 457761008 | Molex | MLX457761008 (Alt: 457761008) RoHS : Compliant | 0 | |||
| 1376109-1 | TE Connectivity | Automotive Connector Contact Pin Crimp AMP TH025 Connector System (Alt: 1376109-1) RoHS : Compliant | 0 | |||
| 1376109-1 | TE Connectivity | Automotive Connector Contact Pin Crimp AMP TH025 Connector System (Alt: 1376109-1) RoHS : Compliant | 0 | |||
| K1137610 | TE Connectivity | (Alt: K1137610) RoHS : Not Compliant | 0 | |||
| 0522761032 | Weidmüller Interface GmbH & Co. KG | (Alt: 0522761032) RoHS : Compliant | 0 | |||
| 1607610000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1607610000) RoHS : Compliant | 0 | |||
| EKMC7610112K | Panasonic Electronic Components | PIR Sensor 5 m 3 VDC 6 VDC 90 EKMC VZ Series (Alt: EKMC7610112K) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 046866761000846+ | KYOCERA Corporation | (Alt: 046866761000846+) RoHS : Compliant |
| 25,000 | |
| XR76108ELTR-F | MaxLinear Inc | DC/DC Switching Regulator, Adjustable, Buck (Step-Down), Single Output, 600 mV to 18 V, 800 kHz, 8 A, 30 Pins, QFN (Alt: XR76108ELTR-F) RoHS : Compliant | 0 | |||
| 04-0761-0546 | TE Connectivity | (Alt: 04-0761-0546) RoHS : Compliant | 0 | |||
| A-DP1608-A2455M77610T | Advanced Ceramic X Corporation | (Alt: A-DP1608-A2455M77610T) RoHS : Compliant | 0 | |||
| 576105P004 | TE Connectivity | (Alt: 576105P004) RoHS : Compliant | 0 | |||
| 1501761031 | Molex | (Alt: 1501761031) RoHS : Compliant | 0 | |||
| 1501761021 | Molex | (Alt: 1501761021) RoHS : Compliant | 0 | |||
| 1761014-3 | TE Connectivity | (Alt: 1761014-3) RoHS : Compliant | 0 | |||
| 1761008-3 | TE Connectivity | (Alt: 1761008-3) RoHS : Compliant | 0 | |||
| 0457761008 | Molex | (Alt: 0457761008) RoHS : Compliant | 0 | |||
| 5018761040 | Molex | Pin Header, 10 Contacts, 2 Rows, 2mm, Tin, 2A, Right Angle, Shrouded, Brass, Signal, THT RA (Alt: 5018761040) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FDML7610S | onsemi | Asymmetric Dual NChannel PowerTrench Power Stage MOSFET 30V (Alt: FDML7610S) RoHS : Compliant | 0 | ||
| XR76108ELTR-F | MaxLinear Inc | DCDC Switching Regulator Adjustable Buck StepDown Single Output 600 mV to 18 V 800 kHz 8 A 30 Pins QFN (Alt: XR76108ELTR-F) RoHS : Compliant | 0 | |||
| MAYA-W476-10B | u-blox AG | WiFi 6 DB BLE 54 802154 hostbased (Alt: MAYA-W476-10B) RoHS : Compliant | 0 | |||
PIC16C76-10/SP![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 28Pin SPDIP Tube (Alt: PIC16C76-10/SP) RoHS : Compliant | 0 | |||
PIC16C76-10/SO![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 28Pin SOIC W Tube (Alt: PIC16C76-10/SO) RoHS : Compliant | 0 | |||
PIC16C76-10I/SP![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 28Pin SPDIP Tube (Alt: PIC16C76-10I/SP) RoHS : Compliant | 0 | |||
PIC16C76-10I/SO![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 28Pin SOIC W Tube (Alt: PIC16C76-10I/SO) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | A-6.176-10-EXT | Raltron Electronics Corporation | IN STOCK SHIP TODAY |
| 7,849 | |
| TD76-1006G1 | Halo Electronics Inc | IN STOCK SHIP TODAY | 2,380 | |||
| 437-6761-000 | Amphenol Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 1,600 | |||
| 87761-0006 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | ||
| NE76100 | NEC Electronics Group | IN STOCK SHIP TODAY | 455 | |||
| 207610-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 402 | ||
| HM76-101R0 | TT electronics / BI Technologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 358 | ||
| 68761-0553 | Molex | IN STOCK SHIP TODAY | 200 | |||
| 09-76-1040 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 200 | ||
| NFS150-76101 | Artesyn Embedded Technologies | IN STOCK SHIP TODAY |
| 192 | ||
| 3002-7761-02 | Omnivision Technologies Inc | IN STOCK SHIP TODAY | 21 | |||
| 5082-7610 | Hewlett Packard Co | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| 0522761030 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 3 | ||
| 0329761001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 68676-10 | Trimble Navigation Limited | IN STOCK SHIP TODAY RoHS : Compliant | 2 | |||
![]() DB Roberts | C-076-10 | Shercon Inc |
| 3 | ||
| 1176-10-A | RAF Electronic Hardware | 0 | ||||
| 4576-1032-A-7 | RAF Electronic Hardware | 0 | ||||
| 07610-02000 | Avdel | MAXLOK NOSE ASY 3/16 | 0 | |||
| 02761-00619 | Avdel | 02761-00619 SSCV-E06-08 | 0 | |||
| 4576-1032-A | RAF Electronic Hardware | 0 | ||||
| 1176-10-SS-20 | RAF Electronic Hardware | 0 | ||||
| 4576-1032-SS | RAF Electronic Hardware | 0 | ||||
| 07610-02003 | Avdel | MAXLOK JAWS,3/16,3PCS=1SET | 0 | |||
| 1976-1032-N | RAF Electronic Hardware | 0 | ||||
| 07610-02107 | Avdel | SPRING MAXLOK 3/16&1/4 | 0 | |||
| 07610-02100 | Avdel | MAXLOK NOSE ASSY,1/4 | 0 | |||
| 005761000002 | Essentra Components | 0 | ||||
| 4076-1032-S-12 | RAF Electronic Hardware | 0 | ||||
| 2276-1032-SS-0 | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | FDML7610S | onsemi | Asymmetric Dual NChannel PowerTrench Power Stage MOSFET 30V (Alt: FDML7610S) RoHS : Compliant | 0 | ||
| 5082-7610 | Broadcom Limited | 7 Segment LED Display Red 20 mA 21 V 1115 mcd 1 76 mm (Alt: 5082-7610) RoHS : Compliant | 0 | |||
PIC16C76-10I/SO![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 28Pin SOIC W Tube (Alt: PIC16C76-10I/SO) RoHS : Compliant | 0 | |||
![]() ECCO | MS90376-10R | StockCap |
| 9,000 | ||
| MS90376-10Y | StockCap |
| 5,400 | |||
![]() FDH Electronics | 200876-10 | AbelConn LLC | Connector MIL M | 136 | ||
| M28776/1-034P | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M28776/1-030L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M28776/1-018P | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| M28876/10-AE | Aptiv PLC | Connector Acc |
| 0 | ||
| M28776/1-018M | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M28776/1-036P | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| M28776/1-028M | TE Connectivity | Relays RoHS : Compliant |
| 0 | ||
| M28876/10-FD | Aptiv PLC | Connector Acc |
| 0 | ||
| M85049/76-10N03 | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/76-10N03 | Glenair Inc | Connector | 0 | |||
| M28776/1-013L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M28776/1-017P | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M85049/76-10Z02 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| M28776/1-014L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
![]() Flip Electronics | FDML7610AS | onsemi | Stock, Ship Today |
| 27,000 | |
| FDML7610S | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,071 | ||
![]() Maritex | 1376109-1 | TE Connectivity | Rectangular Connector Contacts; 1376109-1; TE CONNECTIVITY; Tin; Crimp; Cable; Connector, PCB, Signal, Tab RoHS : Compliant |
| 747,814 | |
| 1376106-1 | TE Connectivity | Automotive Connectors; 1376106-1; TE CONNECTIVITY; Natural; 16; Yes; 33.9 mm RoHS : Compliant |
| 175 | ||
| 1761014-3 | TE Connectivity | Plug-in Connectors; 1761014-3; TE CONNECTIVITY; Yes RoHS : Compliant |
| 1 | ||
![]() Master Electronics | K1137610 | TE Connectivity | RoHS : Compliant |
| 0 | |
| K1137610 | TE Connectivity | Battery Disconnector 35-524-231-GE-900 MOQ Reduction RoHS : Compliant |
| 0 | ||
| HBLALU7610B2 | Hubbell Premise Wiring | The HBLALU7610B2 is an anodized aluminum entrance end fitting used to feed HBLALU7620 series raceways. RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-176-108 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-176-104 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-276-103 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 814761-000 | TE Connectivity | TXR54AB00-4022AI2 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| EKMC7610112K | Panasonic Electronic Components | PIR Motion Sensor - Flat Square Motion Detection Type - 170µA - black - digital - low sensitivity RoHS : Compliant |
| 0 | ||
| 1-576100-4 | TE Connectivity | CRIMPER WIRE ('F') C/WID RoHS : Compliant |
| 0 | ||
| 761054-ZZ | TE Connectivity | 761054 RoHS : Compliant |
| 0 | ||
| 701761042 | OMRON Industrial Automation | PA46-5-300-Q2-NO1-PN-R RoHS : Compliant |
| 0 | ||
| 701761079 | OMRON Industrial Automation | PA46-6-300-NO2-PN-R RoHS : Compliant |
| 0 | ||
| 05400761043 | 3M Interconnect | Conn Ejector Header PL 36 POS 2.54mm IDT RA Cable Mount RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-276-103 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-276-102 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17610/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to QMA Male Right Angle Cable 60 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N female bulkhead to QMA male right angle cable 60 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to QMA male right angle cable 60 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a right angle QMA cable connection on the other. Our type N to right angle QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17610/HS-60 can also be known as a type N jack to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17610/HS-60 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Type N jack to QMA plug cable assembly PE3W17610/HS-60 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17610/HS-60 can also be used in the other direction and will be a right angle QMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA RF cable assembly as per your requirements. |
| 233 | |
| PE3W17610/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to QMA Male Right Angle Cable 36 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to QMA male right angle cable 36 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a right angle QMA cable connection on the other. Our type N to right angle QMA cable assembly has a female gender on end 1 and a male on end 2. PE3W17610/HS-36 can also be known as a type N jack to right angle QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17610/HS-36 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Type N jack to QMA plug cable assembly PE3W17610/HS-36 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17610/HS-36 can also be used in the other direction and will be a right angle QMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to QMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of type N and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to QMA RF cable assembly as per your requirements. |
| 233 | ||
| PE3M0076-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Cable 100 cm Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male cable 100 cm length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male cable 100 cm length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/03-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 N type to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0076-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/55-3028 SMA plug cable assembly PE3M0076-100CM is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0076-100CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/03-0503 N type female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male cable 100 cm length using M17/128-RG400 coax. |
| 125 | ||
| PE3FCA476-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex ST UPC to ST UPC, MM OM4, 2.0mm Riser, Aqua-10M. Pasternack’s PE3FCA476-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long simplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA476-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA476-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA476-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex ST/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 87 | ||
| PE3FCA076-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC APC to LC APC, SM OS2, 2.0mm Riser, Yellow - 10 meter. Pasternack’s PE3FCA076-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex LC/APC to LC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVDF jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA076-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/APC to LC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 83 | ||
| PE7610-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20dB RF fixed attenuator 10W, DC to 4GHz, BNC male to BNC female. The PE7610-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.25:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with BNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7610-20 attenuator is rated for up to 4 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum BNC connector with gold-plated brass contact. Our fixed RF attenuator PE7610-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7610-2 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 4 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: BNC, Connector-In Gender: Male, Connector-Out Series: BNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2dB RF fixed attenuator 10W, DC to 4GHz, BNC male to BNC female. The PE7610-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.25:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with BNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7610-2 attenuator is rated for up to 4 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum BNC connector with gold-plated brass contact. Our fixed RF attenuator PE7610-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE35276-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to MCX Plug Right Angle Cable 100 CM Length Using RG316-DS Coax., Radio frequency assembly N male to MCX plug right angle cable 100 cm length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to MCX plug right angle cable 100 cm length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle MCX cable connection on the other. Our type N to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. This type N to MCX cable is a male to plug coax assembly, PE35276-100CM, can also be known as a type N plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. N type plug to MCX male cable assembly PE35276-100CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35276-100CM can also be used in the other direction and will be right angle MCX plug to N type male cable assembly if the opposite connectivity is required. N type plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to MCX cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to MCX plug right angle cable 100 cm length using RG316-DS coax. |
| 0 | ||
| PE3FCA176-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual SC APC to ST UPC, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA176-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA176-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3C2276-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to TNC Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC bulkhead cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and female on end 2. This type N to TNC cable is a male to female coax assembly, PE3C2276-100CM, can also be known as a low loss N type plug to TNC jack cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC jack cable assembly PE3C2276-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2276-100CM can also be used in the other direction and will be TNC female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W17610 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Female Bulkhead to QMA Male Right Angle Cable Using RG142 Coax. PE3W17610 is a N female bulkhead to QMA male right angle cable using RG142 coax. This Pasternack N female bulkhead to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17610 N female bulkhead to QMA male right angle cable assembly is constructed with RG142 coax. | 0 | |||
| PE3C7976-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMA Male Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C7976-100CM, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C7976-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C7876-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Snap-On QMA Male Right Angle to QMA Female Bulkhead Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly snap-on QMA male right angle to QMA female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on QMA male right angle to QMA female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and QMA bulkhead cable connection on the other. Our low PIM right angle QMA to QMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to QMA cable is a male to female coax assembly, PE3C7876-100CM, can also be known as a low PIM right angle QMA plug to QMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA jack cable assembly PE3C7876-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with right angle QMA to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM QMA right angle male to QMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7876-100CM can also be used in the other direction and will be QMA female bulkhead to right angle QMA male cable assembly if the opposite connectivity is required. Low PIM QMA right angle plug to QMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on QMA male right angle to QMA female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W00676-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Female Cable 100 CM Length Using LMR-400 Coax., Radio frequency assembly N male to N female cable 100 cm length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female cable 100 cm length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3W00676-100CM, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3W00676-100CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00676-100CM can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 100 cm length using LMR-400 coax. |
| 0 | ||
| PE3W07610 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Right Angle Cable Using RG196 Coax. PE3W07610 is a SMA male to MCX plug right angle cable using RG196 coax. This Pasternack SMA male to MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07610 SMA male to MCX plug right angle cable assembly is constructed with RG196 coax. | 0 | |||
![]() Teledyne HiRel | 5962-87761012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
| 5962-87610012A | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761001DA | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8776101EA | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8761001CA | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8776101FA | Teledyne HiRel | DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Vyrian | MKP1847610354P4 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 10uF, Through Hole Mount RoHS : Compliant | 18,327 | ||
PIC16C76-10I/SO![]() | Microchip Technology Inc | RISC Microcontroller, 8-Bit, OTPROM, PIC16 CPU, 20MHz, CMOS, PDSO28 RoHS : Compliant | 12,180 | |||
| MAX17610ATC+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 11,904 | |||
| MAX17610EVKIT | Analog Devices (Maxim Integrated) | 10,884 | ||||
| MAX17610ATC+ | Analog Devices Inc | RoHS : Compliant | 10,693 | |||
| MAX17610ATC-T | Analog Devices (Maxim Integrated) | 8,933 | ||||
V62/07610-01XE![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 2 Channel, +3.192V, PDSO20 RoHS : Compliant | 8,836 | |||
| MAL215876103E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 10000uF, Through Hole Mount RoHS : Compliant | 8,475 | |||
| MAX17610ATC | Analog Devices (Maxim Integrated) | 7,413 | ||||
| PCI7610GHK | Texas Instruments | PCMCIA Bus Controller, CMOS, PBGA209 RoHS : Not Compliant | 7,191 | |||
| QCMD-7610-WS1 | Broadcom Limited | 6,690 | ||||
PIC16C76-10/SO![]() | Microchip Technology Inc | RISC Microcontroller, 8-Bit, OTPROM, PIC16 CPU, 20MHz, CMOS, PDSO28 RoHS : Compliant | 6,154 | |||
PCI7610PDV![]() | Texas Instruments | PCMCIA Bus Controller, CMOS, PQFP208 RoHS : Compliant | 6,070 | |||
V62/04761-01XE![]() | Texas Instruments | Bus Driver, AHCT/VHCT/VT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 5,358 | |||
| R137876101 | Radiall | RF Connector Adapter RoHS : Compliant | 415 | |||
![]() Waytek, Inc. | 7610B | Egis Mobile Electric | Automatic Charging Relay Plus Dual Battery - 160 AMP |
| 28 | |
![]() Win Source Electronics | 501876-1040 | Molex | 20 W/B DUAL R/A PLG HSG ASSY 10C RoHS : Compliant |
| 16,175 | |
| 5054761010 | Molex | RoHS : Compliant |
| 7,571 | ||
| ADV7610BBCZ-RL | Analog Devices Inc | Low Power, 165 MHz HDMI Receiver RoHS : Compliant |
| 2,320 | ||
| BUK7610-100B | Nexperia | N-channel TrenchMOS standard level FET RoHS : Compliant |
| 2,192 | ||
| ADV7610BBCZ | Analog Devices Inc | Low Power, 165 MHz HDMI Receiver RoHS : Compliant |
| 1,274 | ||
AD7610BSTZ![]() | Analog Devices Inc | IC ADC 16BIT 250KSPS 48-LQFP / 1-Channel Single ADC SAR 250ksps 16-bit Parallel/Serial 48-Pin LQFP Tray RoHS : Compliant |
| 1,000 | ||
| ADV7610BBCZ-P | Analog Devices Inc | IC RCVR HDMI 165MHZ LP 76-CSBGA RoHS : Compliant |
| 898 | ||
| ADV7610BBCZ-P-RL | Analog Devices Inc | HDMI Receiver 2RX 76-Pin CSP-BGA T/R / IC RCVR HDMI 165MHZ LP 76CSBGA RoHS : Compliant |
| 890 | ||
AD7610BCPZ![]() | Analog Devices Inc | IC ADC 16BIT SAR 48LFCSP RoHS : Compliant |
| 800 | ||
AD7610BCPZ-RL![]() | Analog Devices Inc | IC ADC 16BIT SAR 48LFCSP RoHS : Compliant |
| 790 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |