7614SLASH6 Price, Distributor, Stock

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our right angle BMA to right angle BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4876-12, can also be known as a right angle BMA female to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4876-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with right angle BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA right angle jack 2 hole flange to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA right angle female 2 hole flange to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax.

1 : $235.99
25 : $224.19
50 : $212.39

152

PE3C7619-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 19.68 inches.

1 : $254.99
25 : $242.24
50 : $229.49
100 : $219.29

PE7611-9

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 9 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 9 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7611-9 is a 9 dB fixed attenuator from Pasternack. This 9 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 9 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 9 dB. The Pasternack PE7611-9 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7611-9 will ship the same business day as purchased from Pasternack’s production facility. This 9 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $65.29
10 : $62.68
25 : $60.07
100 : $57.46

PE3C7615/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-600-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable using LMR-600-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-600-UF coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C7615/HS can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C7615/HS is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-600-UF coax with Times Microwave components with heatshrink.

PE3C7615LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600-UF Coax with HeatShrink, LF Solder. PE3C7615LF/HS is a N male to N male cable using LMR-600-UF coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7615LF/HS N male to N male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W04476-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMB Plug Right Angle Cable 100 cm Length Using RG174 Coax., Radio frequency assembly SMA male to SMB plug right angle cable 100 cm length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug right angle cable 100 cm length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMB cable connection on the other. Our SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3W04476-100CM, can also be known as a SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3W04476-100CM is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04476-100CM can also be used in the other direction and will be right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug right angle cable 100 cm length using RG174 coax.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE3W06076-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06076-12 can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W06076-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3W07617LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male to N Male Cable Using RG8X Coax with HeatShrink, LF Solder. PE3W07617LF/HS is a BNC male to N male cable using RG8X coax. This Pasternack BNC male to N male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07617LF/HS BNC male to N male cable assembly is constructed with RG8X coax.

PE3W16761LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3W16761LF/HS is a N male to N female bulkhead cable using LMR-195-UF coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16761LF/HS N male to N female bulkhead cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18761/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. 10-32 Male to SMB Jack Cable Using RG316-DS Coax with HeatShrink. PE3W18761/HS is a 10-32 male to SMB jack cable using RG316-DS coax. This Pasternack 10-32 male to SMB jack cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm SMB for connector 2. Our male 10-32 to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18761/HS 10-32 male to SMB jack cable assembly is constructed with RG316-DS coax.

PE3576-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to BNC Female Cable Using RG58 Coax, RoHS in 100CM., Radio frequency assembly SMA male to BNC female cable using RG58 coax, RoHS in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable using RG58 coax, RoHS in 100CM, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3576-100CM, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3576-100CM is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3576-100CM can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable using RG58 coax, RoHS in 100CM.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

PE37610LF/HS2

Pasternack Enterprises

PE3576-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Female Cable Using RG58 Coax, RoHS in 12 Inch., Radio frequency assembly SMA male to BNC female cable using RG58 coax, RoHS in 12 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable using RG58 coax, RoHS in 12 inch, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3576-12, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3576-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3576-12 can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable using RG58 coax, RoHS in 12 inch.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

PE3C1761

Pasternack Enterprises

PE3W01761LF

Pasternack Enterprises

Teledyne HiRel

5962-8761101CA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-87615012A

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-87761012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8761401CA

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-87614012A

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-8761301CA

Teledyne HiRel

NAND GATE, DUAL 4-INPUT
RoHS : Not Compliant

5962-87613012A

Teledyne HiRel

NAND GATE, DUAL 4-INPUT
RoHS : Not Compliant

5962-8761501DA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-8761001CA

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-8776101FA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8761001DA

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-8776101EA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8761101DA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-87610012A

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-8761201DA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-YC-9761FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;9.76K;�1%
RoHS : Compliant

MELFC0102-YE-9761BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;9.76K;�0.1%
RoHS : Compliant

MELFC0102-YZ-9761CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;9.76K;�0.25%
RoHS : Compliant

MELFC0204-TN-5761CT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;5.76K;�0.25%
RoHS : Compliant

MELFC0204-ZK-9761FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�100PPM;9.76K;�1%
RoHS : Compliant

UPTF0603-16W-P-1761UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.76K;�0.01%
RoHS : Compliant

UPTF0603-16W-P-5761DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;5.76K;�0.5%
RoHS : Compliant

UPTF0603-16W-P-9761CT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;9.76K;�0.25%
RoHS : Compliant

UPTF0805-10W-E-9761AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�25PPM;9.76K;�0.05%
RoHS : Compliant

UPTF0805-10W-P-1761CT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.76K;�0.25%
RoHS : Compliant

UPTF2010-2W-N-9761BT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�10PPM;9.76K;�0.1%
RoHS : Compliant

UPTF2512-2W-N-1761AT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;1.76K;�0.05%
RoHS : Compliant

UPTF2512-2W-N-8761DT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;8.76K;�0.5%
RoHS : Compliant

UPTF2512-2W-P-9761UT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;9.76K;�0.01%
RoHS : Compliant

PWCR0805-VK-9761DT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;9.76K;�0.5%
RoHS : Compliant

Vyrian

1-2303376-1

TE Connectivity

Rectangular Power Connector, 4 Contact(s), Crimp Terminal, Receptacle
RoHS : Compliant

12,755

2203876-1

TE Connectivity

Connector Accessory
RoHS : Compliant

11,417

MC33761SNT1-029

onsemi

Fixed Positive LDO Regulator, 2.9V, 0.25V Dropout, BIPolar, PDSO5
RoHS : Not Compliant

11,063

LT1761ES5-1.5#TR

Analog Devices Inc

Fixed Positive LDO Regulator, 1.5V, 0.45V Dropout, PDSO5
RoHS : Not Compliant

10,729

LT1761IS5-1-2-TRPBF

Analog Devices Inc

10,263

1-1761681-1

TE Connectivity

Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug
RoHS : Compliant

10,222

LT1761ES5-1.5#TRPBF

Analog Devices Inc

Fixed Positive LDO Regulator, 1.5V, 0.45V Dropout, BIPolar, PDSO5
RoHS : Compliant

8,078

76155-7618

Molex

Board Connector, 192 Contact(s), 12 Row(s), Male, Straight, 0.075 inch Pitch, Press Fit Terminal, Locking
RoHS : Compliant

7,238

1776168

Phoenix Contact

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

6,858

ICL7618BESA

Analog Devices Inc

Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8

6,757

W1202-476108

Broadcom Limited

5,897

HCPL-7611#500

Broadcom Limited

RoHS : Not Compliant

5,304

2-1761713-6

TE Connectivity

Board Connector, 16 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, Blue Insulator, Plug
RoHS : Compliant

3,806

XCE7VX485T-3FFG1761E

AMD Xilinx

Field Programmable Gate Array, 37950 CLBs, 485760-Cell, PBGA1761
RoHS : Compliant

2,691

2147611105

Molex

Connector Accessory
RoHS : Compliant

631

Win Source Electronics

MIC2076-1YM

Microchip Technology Inc

IC DISTRIBUTION SW DUAL 8-SOIC
RoHS : Compliant

410 : $0.7399
325 : $0.77
250 : $0.8
175 : $0.8602
115 : $0.8903
55 : $0.9504

25,390

LT1761ES5-BYP#TRPBF:E

Linear Technology

116 : $2.5895
93 : $2.6948
72 : $2.8
50 : $3.0106
33 : $3.1158
16 : $3.3264

11,480

LT1761IS5-3

Linear Technology

100mA, Low Noise, LDO Micropower Regulators in TSOT-23
RoHS : Not Compliant

68 : $4.9982
51 : $5.575
39 : $5.7672
29 : $5.9594
19 : $6.1517
8 : $7.4974

10,000

AD7616BSTZ

Analog Devices Inc

16-Channel DAS with 16-Bit, Bipolar Input, Dual Simultaneous Sampling ADC | IC ADC 16BIT SAR 80LQFP
RoHS : Compliant

22 : $13.9773
18 : $14.5455
14 : $15.1137
10 : $16.2501
6 : $16.8182
3 : $17.9546

10,000

LT1761ES5-5#TRMPBF

Linear Technology

IC REG LDO 5V 0.1A TSOT23-5
RoHS : Compliant

135 : $2.2364
108 : $2.3273
83 : $2.4182
58 : $2.6
38 : $2.691
18 : $2.8728

8,000

LT1761IS5-BYP

Linear Technology

100mA, Low Noise, LDO Micropower Regulators in TSOT-23
RoHS : Not Compliant

99 : $3.0528
74 : $3.405
57 : $3.5225
42 : $3.6399
27 : $3.7573
11 : $4.5792

5,500

DAC7612U

Texas Instruments

IC 12-BIT DUAL/SER D/A 8-SOIC
RoHS : Compliant

25 : $12.2405
19 : $13.6529
15 : $14.1236
11 : $14.5944
7 : $15.0652
3 : $18.3607

5,000

AD5761RARUZ

Analog Devices Inc

Multiple Range, 16-/12-Bit, Bipolar/Unipolar Voltage Output DACs with 2 ppm/°C Reference | IC DAC 16BIT V-OUT 16TSSOP
RoHS : Compliant

37 : $8.164
28 : $9.106
22 : $9.42
16 : $9.734
10 : $10.048
5 : $12.246

4,990

ADV7611BSWZ-P-RL

Analog Devices Inc

Low Power 165 MHz HDMI Receiver
RoHS : Compliant

54 : $5.591
43 : $5.8182
34 : $6.0455
24 : $6.5001
15 : $6.7273
7 : $7.1819

4,570

ADV7619KSVZ

Analog Devices Inc

IC RECEIVER DUAL PORT 128TQFP
RoHS : Compliant

19 : $16.6166
14 : $18.5339
11 : $19.173
8 : $19.8121
5 : $20.4512
3 : $24.9249

3,600

ADM2761EBRWZ

Analog Devices Inc

IC TRANSCEIVER HALF 1/1 16SOIC / 1/1 Transceiver Half RS422, RS485 16-SOIC
RoHS : Compliant

36 : $8.4247
27 : $9.3968
21 : $9.7208
15 : $10.0448
10 : $10.3689
4 : $12.6371

2,680

LT1761IS5-5

Linear Technology

IC REG LDO 5V 0.1A TSOT23-5
RoHS : Not Compliant

131 : $2.5731
98 : $2.8699
76 : $2.9689
55 : $3.0679
36 : $3.1668
15 : $3.8595

2,470

1761987-9

TE Connectivity

Quad Small Form- factor Pluggable (QSFP) Products | CONN MINI SAS RCP 38P SLD RA SMD
RoHS : Compliant

113 : $2.6641
85 : $2.9715
66 : $3.0739
48 : $3.1764
31 : $3.2789
13 : $3.9961

1,600

LT1761IS5-SD

Linear Technology

100mA, Low Noise, LDO Micropower Regulators in TSOT-23
RoHS : Not Compliant

77 : $4.379
58 : $4.8843
45 : $5.0527
33 : $5.2211
21 : $5.3896
9 : $6.5685

1,490

DAC7615UB

Texas Instruments

IC QUAD 12-BIT G.P.D/A 16-SOIC
RoHS : Compliant

12 : $29.009
9 : $32.3562
7 : $33.472
5 : $34.5877
4 : $35.7034
2 : $43.5135

142

7614SLASH6 Distributor

Link URL