| Electronic Components Datasheet Search |
|
76HG-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 76HPSB10GWRT | Grayhill Inc | Switch DIP ON OFF SPST 10 Piano 0.15A 30VDC Gull Wing 2000Cycle/SwitchCycle 2.54mm SMD T/R - Bulk (Alt: 76HPSB10GWRT) RoHS : Compliant |
| 500 | |
| S76HL512TC0BHB000 | Infineon Technologies AG | Combo Memory, 8-Bit, 64 Mbit DDR, 512 Mbit NOR Based MCP, 24 Pins, FBGA - Trays (Alt: S76HL512TC0BHB000) RoHS : Compliant |
| 346 | ||
| D38999/20SG76HD(LC) | Amphenol Corporation | - Bulk (Alt: D38999/20SG76HD(LC)) RoHS : Not Compliant |
| 0 | ||
| D38999/24KG76HD(LC) | Amphenol Corporation | - Bulk (Alt: D38999/24KG76HD(LC)) RoHS : Not Compliant |
| 0 | ||
| D38999/20KG76HB(LC) | Amphenol Corporation | - Bulk (Alt: D38999/20KG76HB(LC)) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-69P-6J7-6H | Glenair Inc | - Bulk (Alt: MWDM2L-69P-6J7-6H) RoHS : Not Compliant |
| 0 | ||
| LI-IMX901C-GM2B-076H | Leopard Imaging | GLOBAL SHUTTER IMX901 FAKRA CAMERA WITH 8K HORIZONTAL RESOLU - Bulk (Alt: LI-IMX901C-GM2B-076H) RoHS : Not Compliant |
| 0 | ||
| 76HPSB10GWT | Grayhill Inc | Switch DIP ON OFF SPST 10 Piano 0.15A 30VDC Gull Wing 2000Cycle/SwitchCycle 2.54mm SMD T/R - Bulk (Alt: 76HPSB10GWT) RoHS : Compliant |
| 0 | ||
| D38999/20LG76HC(LC) | Amphenol Corporation | - Bulk (Alt: D38999/20LG76HC(LC)) RoHS : Not Compliant |
| 0 | ||
| D38999/24LG76HE(LC) | Amphenol Corporation | - Bulk (Alt: D38999/24LG76HE(LC)) RoHS : Not Compliant |
| 0 | ||
| D38999/24SG76HB(LC) | Amphenol Corporation | - Bulk (Alt: D38999/24SG76HB(LC)) RoHS : Not Compliant |
| 0 | ||
| M39003/01-2376H | Vishay Intertechnologies | Tantalum Capacitor, 12 uF, 50 V, ? 10%, Axial Leaded, M, 7.34 mm, 17.42 mm - Bulk (Alt: M39003/01-2376H) RoHS : Not Compliant |
| 0 | ||
| M39003/01-2576/HSD | Vishay Intertechnologies | Tantalum Capacitor, 0.068 uF, 50 V, ? 20%, Axial Leaded, P, 3.43 mm, 7.26 mm - Custom Tape W/Leader (Alt: M39003/01-2576/HSD) RoHS : Not Compliant |
| 0 | ||
| M39003/01-5076/HSD | Vishay Intertechnologies | Tantalum Capacitor, 0.68 uF, 50 V, ? 5%, Axial Leaded, M, 3.43 mm, 7.26 mm - Custom Tape W/Leader (Alt: M39003/01-5076/HSD) RoHS : Not Compliant |
| 0 | ||
| 672D476H040CD5C | Vishay Intertechnologies | Electrolytic Capacitor, 47 uF, 40 V, -10%, +50%, PC Pin, 1000 hours @ 105?C, Polar, Radial Leaded - Bulk (Alt: 672D476H040CD5C) RoHS : Not Compliant |
| 0 | ||
![]() Newark | LT1376HVIS8#TRPBF | Analog Devices Inc | Dc/Dc Conv, Buck, 500Khz, 125Deg C; |Analog Devices, Inc. LT1376HVIS8#TRPBF RoHS : Compliant |
| 706 | |
| LT1376HVIS8#TRPBF | Analog Devices Inc | Dc/Dc Conv, Buck, 500Khz, 125Deg C; |Analog Devices, Inc. LT1376HVIS8#TRPBF RoHS : Compliant |
| 706 | ||
| B32776H9106K000 | TDK Corporation | Cap, Power Film, 10Uf, 800V, Radial; |Tdk B32776H9106K000 RoHS : Compliant |
| 668 | ||
| B32776H9126J000 | TDK Corporation | Cap, Power Film, 12Uf, 800V, Radial; |Tdk B32776H9126J000 RoHS : Compliant |
| 632 | ||
| B32776H2475K000 | TDK Corporation | Cap, Power Film, 4.7Uf, 1.4Kv, Radial; |Tdk B32776H2475K000 RoHS : Compliant |
| 430 | ||
| B32776H1126K000 | TDK Corporation | Cap, Power Film, 12Uf, 1.1Kv, Radial; |Tdk B32776H1126K000 RoHS : Compliant |
| 400 | ||
| B32776H2825K000 | TDK Corporation | Cap, Power Film, 8.2Uf, 1.4Kv, Radial; |Tdk B32776H2825K000 RoHS : Compliant |
| 180 | ||
| B32776H1156J000 | TDK Corporation | Cap, Power Film, 15Uf, 1.1Kv, Radial; |Tdk B32776H1156J000 RoHS : Compliant |
| 135 | ||
| LT6376HMS#PBF | Analog Devices Inc | Diff-Amp, 300Khz, -40 To 125Deg C, Msop; |Analog Devices, Inc. LT6376HMS#PBF RoHS : Compliant |
| 111 | ||
| S76HL512TC0BHB003 | Infineon Technologies AG | Flash Memory, 512Mbit, -40 To 105Deg C; |Infineon Technologies S76HL512TC0BHB003 RoHS : Compliant |
| 100 | ||
| S76HL512TC0BHB003 | Infineon Technologies AG | Flash Memory, 512Mbit, -40 To 105Deg C; |Infineon Technologies S76HL512TC0BHB003 RoHS : Compliant |
| 100 | ||
| S76HS512TC0BHB013 | Infineon Technologies AG | Flash Memory, 512Mbit, -40 To 105Deg C; |Infineon Technologies S76HS512TC0BHB013 RoHS : Compliant |
| 67 | ||
| B32776H0156K000 | TDK Corporation | Cap, 15Uf, 1.1Kv, Film, Radial; |Tdk B32776H0156K000 RoHS : Compliant |
| 60 | ||
| S76HL512TC0BHB000 | Infineon Technologies AG | Flash Memory, 512Mbit, -40 To 105Deg C; |Infineon Technologies S76HL512TC0BHB000 RoHS : Compliant |
| 24 | ||
| B32776H1156K000 | TDK Corporation | Cap, Power Film, 15Uf, 1.1Kv, Radial; |Tdk B32776H1156K000 RoHS : Compliant |
| 10 | ||
![]() Analog Devices Inc | LT1976HFE#TRPBF | Analog Devices Inc | Hi V 1.5A,200kHz BuckSw Reg w/ RoHS : Compliant |
| 5,000 | |
| MAX4376HAUK/V+ | Analog Devices Inc | Single/Dual/Quad High-Side Cur RoHS : Compliant | 2,884 | |||
| LT1076HVCT7-5#PBF | Analog Devices Inc | 5V Buck Sw Reg RoHS : Compliant |
| 900 | ||
| LTC3676HLXE#PBF | Analog Devices Inc | Pwr M Solution for Application RoHS : Compliant |
| 500 | ||
| LT1376HVIS8#PBF | Analog Devices Inc | 1.5A, 500kHz Buck Sw Regs RoHS : Compliant |
| 104 | ||
| LT1076HVCT-5#PBF | Analog Devices Inc | 5V Buck Sw Reg RoHS : Compliant |
| 12 | ||
| LT6376HDF#PBF | Analog Devices Inc | ±230V Common Mode V G = 10 Dif RoHS : Compliant |
| 0 | ||
| LT6376HMS#PBF | Analog Devices Inc | ±230V Common Mode V G = 10 Dif RoHS : Compliant |
| 0 | ||
| LT6376HMS#TRPBF | Analog Devices Inc | ±230V Common Mode V G = 10 Dif RoHS : Compliant |
| 0 | ||
| LTC3676HUJ-1#TRPBF | Analog Devices Inc | Pwr M Solution for Application RoHS : Compliant |
| 0 | ||
| LTC4376HDHD#WPBF | Analog Devices Inc | 7A Ideal Diode with Reverse In RoHS : Compliant |
| 0 | ||
| LT1376HVCS#PBF | Analog Devices Inc | 1.5A, 500kHz Buck Sw Regs RoHS : Compliant |
| 0 | ||
| LTC3676HUJ#WPBF | Analog Devices Inc | Pwr M Solution for Application RoHS : Compliant |
| 0 | ||
| LT1076HVIR#PBF | Analog Devices Inc | Buck Sw Reg RoHS : Compliant |
| 0 | ||
| LT1376HVIS8#TRPBF | Analog Devices Inc | 1.5A, 500kHz Buck Sw Regs RoHS : Compliant |
| 0 | ||
![]() RS | 76HPSB04GWRT | Grayhill Inc | DIP SWITCH, 4PST, 3 POSITION, PIANO ACTUATOR, 150MA AC, 30VDC, R/A, GULL WING RoHS : Compliant |
| 435 | |
| 76HPSB02GWRT | Grayhill Inc | DIP SWITCH, SPST, 2 POSITION, PIANO ACTUATOR, 150MA, 30VDC, R/A, GULL WING RoHS : Compliant |
| 360 | ||
| 76HPSB08GWRT | Grayhill Inc | SWITCH, DIP, 8 POS. SPST, SIDE TOGGLE, 0.15A, 30VDC, GULL WING TERM, TAPE SEAL RoHS : Compliant |
| 23 | ||
| SEMIX653GAL176HDS (27890540) | SEMIKRON | SEMIX; TRENCH IGBT MODULE; 1700V; 800A |
| 10 | ||
| 2450746 (25530076) (HNI80501-100RS) | RS Pro | 1/2-13 GRADE 8 FINISHED HEX NUT ZINC YELLOW PLATED |
| 5 | ||
| 2454024 (25533376) (HFI503103500NA-050RS) | RS Pro | 5/16-24 X 3 1/2 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 3 | ||
| 1412576 (HC-STA-B06-HLFS-1TTP13-EL-AL) | Phoenix Contact | CONNECTOR HOUSING;HOOD;TOP ENTRY;B6;LOCKING CLIP ON BASE BOTTOM |
| 2 | ||
| 2453899 (25533176) (HCI507501500-025RS) | RS Pro | 3/4-10 X 1 1/2 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, COARSE |
| 2 | ||
| 0259-00176 (HERA55 KIT, RISER BLOCK 35) | Hub City | RIGHT ANGLE GEARBOX |
| 2 | ||
| 2453472 (25533476) (HFI506204000NA-025RS) | RS Pro | 5/8-18 X 4 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 2 | ||
| LLF76HNP | Cynergy3 Components | EXT LOW LEVEL FLOAT SWITCH 100VA PPS M12 NITRILE GASKET |
| 1 | ||
| 1590276 (HC-26P1N122300) | Phoenix Contact | CIRCULAR CONNECTOR;RECEPTACLE;MALE PINS;26 POSITION;M27-26;8A |
| 1 | ||
| 2453856 (25533076) (HCI502506000-050RS) | RS Pro | 1/4-20 X 6 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, COARSE |
| 1 | ||
| 2454312 (25530976) (HXLI20750700G-010RS) | RS Pro | 3/4 X 7 IN HEX HEAD LAG BOLT, GRADE A, GALVANIZED |
| 1 | ||
| 2453509 (25533576) (HFI803102751NA-050RS) | RS Pro | 5/16-24 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 1 | ||
![]() Microchip Technology Inc | MIC2776H-YM5-TR | Microchip Technology Inc | Adjustable Voltage Supervisor with 0.3V Threshold, Manual Reset & Active-High Pu, SOT-23, Projected EOL: 2036-02-20 RoHS : Compliant |
| 15,000 | |
| TFS1176H | Microchip Technology Inc | TFS1176H, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | 376-H07-2Y | MACHINE SCREWS | 800 | |||
| MS21076H3N | PAOLO ASTORI spa | 744 | ||||
| MS21076H4N | Nafco USA | 38 | ||||
| 76HPSB08GWT | MISC. SWITCHES | 26 | ||||
| AN176H16 | AN Bolts | 5 | ||||
| 787-6HGI | MISCELLANEOUS | 1 | ||||
![]() Rochester Electronics | S76HL512TC0BHB003 | Infineon Technologies AG | 512Mb SEMPER Flash and 64Mb HYPERRAM 2.0 RoHS : Compliant |
| 3,996 | |
| S76HL512TC0BHB000 | Infineon Technologies AG | 512Mb SEMPER Flash and 64Mb HYPERRAM 2.0 RoHS : Compliant |
| 5,761 | ||
| LT1376HVCS#PBF | Analog Devices Inc | IC VOLT REG Adjustable Step-Down, Step-Up/Step-Down Buck, SEPIC 1 OUT 2.42V - 27.9V 1.5A (Switch) 16-SOIC Tube RoHS : Compliant |
| 53 | ||
| MAX4376HAUK/V+ | Analog Devices Inc | Single/Dual/Quad High-Side Current-Sense RoHS : Compliant | 2,300 | |||
LM2576HVS-3.3/NOPB![]() | Texas Instruments | IC VOLT REG Fixed Step-Down Buck 1 OUT 3.3V 3A TO-263-6 Tube RoHS : Compliant |
| 16,647 | ||
LM2576HVS-5.0![]() | Texas Instruments | Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSSO5 RoHS : Not Compliant |
| 447 | ||
LM2576HVT-5.0/LB03![]() | Texas Instruments | Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSFM5 RoHS : Not Compliant |
| 364 | ||
LT1076HVCT7#PBF![]() | Linear Technology | IC VOLT REG Adjustable Step-Up, Step-Down, Step-Up/Step-Down Boost, Buck, Flyback 1 OUT 2.21V - 75V (Switch) 10A TO-220-7 Tube RoHS : Compliant |
| 334 | ||
| MAX4376HAUK | Maxim Integrated Products | MAX4376 Single High-Side Current-Sense Amplifier With Internal Gain RoHS : Not Compliant |
| 3,691 | ||
| PM5376H-FXI | Microchip Technology Inc | PM5376H - TSE Nx160, 160Gbs, STS-1/AU-3 Transport Switch Element |
| 96 | ||
| LM2576HVS-3.3 | National Semiconductor Corporation | Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSSO5 RoHS : Not Compliant |
| 2,177 | ||
| LM2576HVS-3.3/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed Step-Down Buck 1 OUT 3.3V 3A TO-263-6 Tube RoHS : Compliant |
| 6,185 | ||
| LM2576HVS-5.0 | National Semiconductor Corporation | Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSSO5 RoHS : Not Compliant |
| 372 | ||
| LM2576HVSX-3.3 | National Semiconductor Corporation | Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSSO5 RoHS : Not Compliant |
| 100 | ||
| UPA1476H-AZ | Renesas Electronics Corporation | Power Bipolar Transistor, 2A I(C), 115V V(BR)CEO, 4-Element, NPN, Silicon, Plastic/Epoxy, 10 Pin RoHS : Compliant |
| 2,546 | ||
![]() Sager | 76HPSB10GWT | Grayhill Inc | DIP Switches / SIP Switches ASM,SP/ST 10TGL HPSB GW,LF RoHS : Compliant |
| 0 | |
| 76H1-17-1-ZB | TE Connectivity | TE Connectivity 76H1-17-1-ZB RoHS : Compliant | 0 | |||
| XZ203676HSC | Honeywell Sensing and Control / MICRO SWITCH | Board Mount Pressure Sensors 400-1200 RANGE SENSORS | 0 | |||
| LLF76HNP | Cynergy3 Components | Liquid Level Sensors LLS |
| 0 | ||
| 43-30176H | Honeywell Sensing and Control / MICRO SWITCH | Basic / Snap Action Switches | 0 | |||
| RSF76H050TV | Cynergy3 Components | Liquid Level Sensors LLS |
| 0 | ||
| VA1176HB-00000-000 | Carling Technologies | Rocker Switches VA1176HB00000000 RoHS : Compliant |
| 0 | ||
| 76H1-11-1-B | TE Connectivity | TE Connectivity 76H1-11-1-B RoHS : Not Compliant |
| 0 | ||
| 76H1-19-1-ZB | TE Connectivity | TE Connectivity 76H1-19-1-ZB RoHS : Compliant | 0 | |||
| 76HPSB04GWRT | Grayhill Inc | DIP Switches / SIP Switches DIPSwitch SPST Piano DIP Gull Wing 4 Pos RoHS : Compliant |
| 0 | ||
| TSF76H050TV | Cynergy3 Components | Liquid Level Sensors LLS |
| 0 | ||
| 76H1-17-1-B | TE Connectivity | TE Connectivity 76H1-17-1-B RoHS : Not Compliant |
| 0 | ||
| 76H1-25-1-ZB | TE Connectivity | TE Connectivity 76H1-25-1-ZB RoHS : Compliant | 0 | |||
| 76HPSB06GWT | Grayhill Inc | DIP Switches / SIP Switches ASM,SP/ST 6TGL HPSB GW,LF |
| 0 | ||
| 76HPSB04T | Grayhill Inc | DIP Switches / SIP Switches DIP Switch, SPST, Piano-DIP, thru hole, 4 position, RoHS Compliant | 0 | |||
![]() TME | 76HPSB08GWRT | Grayhill Inc | Switch: DIP-SWITCH; Pos: 8; SMT; -40÷85°C; Pitch: 2.54mm RoHS : Compliant |
| 4,500 | |
| P276HL472M275CL40J | YAGEO Corporation | Capacitor: paper; X2; 0.0047uF; 10.2mm |
| 1,270 | ||
| P276HL472M275A | YAGEO Corporation | Capacitor: paper; X2; 0.0047uF; 10.2mm; ±20%; THT; 630VDC; -40÷110°C |
| 1,100 | ||
| LM2576HVT-12 | HTC Korea | PMIC; DC/DC converter; Uin: 15÷60V; Uout: 12V; 3A; TO220-5; THT; Ch: 1 |
| 252 | ||
LM2576HVS-12/NOPB![]() | Texas Instruments | PMIC; DC/DC converter; Uin: 4÷60VDC; Uout: 12VDC; 3A; TO263-5; SMD RoHS : Compliant |
| 193 | ||
LM2576HVSX-12/NOPB![]() | Texas Instruments | PMIC; DC/DC converter; Uin: 4÷60VDC; Uout: 12VDC; 3A; TO263-5; SMD RoHS : Compliant |
| 185 | ||
LM2576HVS-5.0/NOPB![]() | Texas Instruments | PMIC; DC/DC converter; Uin: 4÷60VDC; Uout: 5VDC; 3A; TO263-5; SMD RoHS : Compliant |
| 159 | ||
| B32776H0126K | TDK Corporation | Capacitor: polypropylene; DC-Link; 12uF; 920VDC; Leads: radial; THT |
| 37 | ||
| 35122076.HMT1 | Bopla | Enclosure: desktop; BoPad; X: 226mm; Y: 220mm; Z: 83.7mm; ABS; IP65 |
| 8 | ||
| 35116076.HMT1 | Bopla | Enclosure: desktop; BoPad; X: 164mm; Y: 160mm; Z: 68.4mm; ABS; IP65 |
| 1 | ||
| LM2576HVDP-12 | HTC Korea | PMIC; DC/DC converter; Uin: 15÷60V; Uout: 12V; 3A; SOP8-EP; SMD; Ch: 1 |
| 0 | ||
| LM2576HVT-3.3 | HTC Korea | PMIC; DC/DC converter; Uin: 6÷60V; Uout: 3.3V; 3A; TO220-5; THT; Ch: 1 |
| 0 | ||
| SEMIX653GB176HDS 27890450 | SEMIKRON | Module: IGBT; transistor/transistor; IGBT half-bridge; Ic: 450A |
| 0 | ||
| SEMIX653GAR176HDS 27890530 | SEMIKRON | Module: IGBT; diode/transistor; buck chopper,thermistor; Ic: 450A |
| 0 | ||
| SEMIX653GAL176HDS 27890540 | SEMIKRON | Module: IGBT; diode/transistor; boost chopper,thermistor; screw |
| 0 | ||
![]() Ameya Holding Limited | MAX4376HAUK+T | Analog Devices Inc | MAX4376 Series 28V 2 MHz Buffer Current Sense Operational Amplifier - SOT-23-5 RoHS : Compliant | 25 | ||
![]() ComSIT USA | TA8276H![]() | Toshiba America Electronic Components | MAX POWER 35 W BTL X 4 CH AUDIO POWER IC Audio Amplifier, 23W, 4 Channel(s), 1 Func, Bipolar, PZFM25 RoHS : Not Compliant | 31,868 | ||
| LM2576HVTADJ | National Semiconductor Corporation | SIMPLE SWITCHER 3 AMP STEP DOWN VOLTAGE REGULATOR Switching Regulator, Voltage-mode, 3A, 63kHz Switching Freq-Max, PSFM5 RoHS : Not Compliant | 190 | |||
| LM7576HVT50 | National Semiconductor Corporation | Electronic Component RoHS : Not Compliant | 40 | |||
| WPCD376HAKFG | Winbond Electronics Corp | Electronic Component RoHS : Not Compliant | 35 | |||
![]() Interstate Connecting Components | MWDM2L-69P-6J7-6H | Glenair Inc | Glenair Micro D |
| 0 | |
| MWDM2L-9S-0J7-6H | Glenair Inc | 0 | ||||
| MWDM2L-15P-6K7-6H | Glenair Inc | RoHS : Compliant | 0 | |||
| 76H1-11-1-B | TE Connectivity | 76H1-11-1-B RoHS : Not Compliant |
| 0 | ||
| 76H1-17-1-B | TE Connectivity | 76H1-17-1-B RoHS : Not Compliant |
| 0 | ||
| 76H1-D13-1-C | TE Connectivity | 76H1-D13-1-C RoHS : Compliant | 0 | |||
| 76H1-09-1-B | TE Connectivity | 76H1-09-1-B RoHS : Not Compliant |
| 0 | ||
| 76H1-15-1-B | TE Connectivity | 76H1-15-1-B RoHS : Not Compliant |
| 0 | ||
| CAP ID=16.76 H=16 | TE Connectivity | CAP ID=16.76 H=16 | 0 | |||
| TV09RW17-6H | Amphenol Aerospace | 88-768425-06P | 0 | |||
| 233-330NF07-176HN1 | Glenair Inc | SUPERSEAL RECEPTACLE FEED-THROUGH CONNECTOR | 0 | |||
| 345HS011M17-6H03-10P | Glenair Inc | SHORTING CAP ADAPTER | 0 | |||
| 76H1-19-1-B | TE Connectivity | 76H1-19-1-B RoHS : Not Compliant |
| 0 | ||
| MWDM2L-9P-8J7-6H | Glenair Inc | 0 | ||||
| MWDM2L-15S-6K7-6H | Glenair Inc | RoHS : Compliant | 0 | |||
![]() PEI Genesis | CTVPS00RF-17-6HN-LC | Amphenol Corporation |
| 228 | ||
| CTVS06RF-17-6HA-LC | Amphenol Corporation |
| 225 | |||
| TVS06RF-17-6HD | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| TVS07RF-17-6HA-LC | Amphenol Corporation |
| 0 | |||
| CTVPS00RF-17-6HA | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| CTV06RW-17-6HA | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| TVPS00RF-17-6HN-LC | Amphenol Corporation |
| 0 | |||
| TVS06RF-17-6HB-LC | Amphenol Corporation |
| 0 | |||
| TVPS00RF-17-6HA | Amphenol Corporation |
| 0 | |||
| CTVP00RW-17-6HN-LC | Amphenol Corporation |
| 0 | |||
| TV06RW-17-6HC | Amphenol Corporation |
| 0 | |||
| TVS06RF-17-6HA | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| TV06DT-17-6HN | Amphenol Corporation |
| 0 | |||
| TV07RW-17-6HN | Amphenol Corporation |
| 0 | |||
| TV07DZ-17-6HN-LC | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | X208576HSC | Honeywell Sensing and Control | Switch |
| 1,478 | |
| TV06RW-17-6HN-LC | Amphenol Corporation | TV 6C 6#12 PIN PLUG |
| 275 | ||
| TVS06RF-17-6HN-LC | Amphenol Corporation | TV 6C 6#12 PIN PLUG |
| 275 | ||
| TVS07RF-17-6HN-LC | Amphenol Corporation | TV 6C 6#12 PIN J/N RECP |
| 275 | ||
| 76H1-D11-1-C | TE Connectivity | Connectors RoHS : Compliant |
| 135 | ||
| TV07RW-17-6HN-LC | Amphenol Corporation | TV 6C 6#12 PIN J/N RECP |
| 109 | ||
| TVPS00RF-17-6HA-LC | Amphenol Corporation | TV 6C 6#12 PIN RECP |
| 108 | ||
| TV06RW-17-6HB-LC | Amphenol Corporation | TV 6C 6#12 PIN PLUG |
| 82 | ||
| TV06RW-17-6HA-LC | Amphenol Corporation | TV 6C 6#12 PIN PLUG |
| 62 | ||
| 76H1-15-1-B | Polamco Ltd | BACKSHELL 76H1-15-1-B |
| 17 | ||
| TVS06RF-17-6HD-LC | Amphenol Corporation | Connector |
| 5 | ||
![]() Richardson RFPD | MY76HC | MACOM | Up/Down Conv Mixer 2GHz 3-Pin RoHS : Not Compliant |
| 0 | |
| APM-506K48C76HB | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| LT6376HDF#PBF | Analog Devices Inc | SP Amp Difference Amplifier Single R-R O/P 50V 12- RoHS : Compliant |
| 0 | ||
| LT6376HMS#PBF | Analog Devices Inc | SP Amp Difference Amplifier Single R-R O/P 50V 12- RoHS : Compliant |
| 0 | ||
| LT6376HMS#TRPBF | Analog Devices Inc | SP Amp Difference Amplifier Single R-R O/P 50V 12- RoHS : Compliant |
| 0 | ||
| LTC3676HUJ-1#TRPBF | Analog Devices Inc | Microprocessor Based Systems 2.7V to 5.5V 40-Pin Q RoHS : Compliant |
| 0 | ||
| LT1976HFE#TRPBF | Analog Devices Inc | Conv DC-DC 2.4V to 60V Step Down Single-Out 1.2V t RoHS : Compliant |
| 0 | ||
| LTC3676HUJ#TRPBF | Analog Devices Inc | Microprocessor Based Systems 2.7V to 5.5V 40-Pin Q RoHS : Compliant |
| 0 | ||
| LT1376HVCS#PBF | Analog Devices Inc | Conv DC-DC 5V to 30V Synchronous Step Down Single- RoHS : Compliant |
| 0 | ||
| APM-107K48C76HB | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| APM-257K33C76HB | Europtronic | FILM CAPACITOR RoHS : Compliant | 0 | |||
| LT1076HVIR#PBF | Analog Devices Inc | Conv DC-DC 7.3V to 64V Synchronous Step Down Singl RoHS : Compliant |
| 0 | ||
| M76H | MACOM | Up/Down Conv Mixer 8.5GHz 3-Pin MPAK RoHS : Not Compliant |
| 0 | ||
| B39321R976H110 | RF360 Holdings Singapore Pte Ltd | R 976 315.100MHZ RoHS : Compliant |
| 0 | ||
| LT1076HVCT-5#PBF | Analog Devices Inc | Conv DC-DC 7.3V to 64V Step Down Single-Out 5V 4A RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | LM2576HVT-ADJ-HTC | HTC Korea | INSTOCK | 36,925 | ||
| 76HPSB08GWRT | Grayhill Inc | INSTOCK RoHS : Compliant | 6,318 | |||
| CBU-6300-4776H | YOK | INSTOCK | 5,477 | |||
| LM2576HVR-ADJ-HTC | HTC Korea | INSTOCK | 5,024 | |||
| TXM2976H274 | Motorola Semiconductor Products | INSTOCK | 5,000 | |||
| X208576HSC | Honeywell Sensing and Control | INSTOCK | 2,912 | |||
| LM2576HVR-12-HTC | HTC Korea | INSTOCK | 1,532 | |||
| TXM2976H274 | INSTOCK | 500 | ||||
| LM2576HVS-5.0 | INSTOCK | 162 | ||||
| LM2576HVSX-5.0 | INSTOCK | 98 | ||||
| LM2576HVS-5.0/NOPB | National Semiconductor Corporation | INSTOCK RoHS : Compliant | 83 | |||
LM2576HVSX-ADJ/NOPB![]() | Texas Instruments | INSTOCK RoHS : Compliant | 53 | |||
| LM2576HVS-5.0 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 41 | |||
| LM2576HVT-ADJ | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 40 | |||
| LM2576HVS-ADJ/NOPB | INSTOCK | 21 | ||||
![]() Avnet Abacus | 76HPSB08GWRT | Grayhill Inc | Switch DIP ON OFF SPST 8 Piano 015A 30VDC Gull Wing 2000CycleSwitchCycle 254mm SMD TR (Alt: 76HPSB08GWRT) RoHS : Compliant | 4,000 | ||
| 76HPSB10GWT | Grayhill Inc | Switch DIP ON OFF SPST 10 Piano 015A 30VDC Gull Wing 2000CycleSwitchCycle 254mm SMD TR (Alt: 76HPSB10GWT) RoHS : Compliant | 0 | |||
| B32776H156K | TDK Corporation | Power Film Capacitor 15 uF 920 V 10 Metallized PP Radial Box 4 Pin Through Hole (Alt: B32776H0156K000) RoHS : Compliant | 0 | |||
| 76HPSB04GWRT | Grayhill Inc | Switch DIP ON OFF SPST 4 Piano 015A 30VDC Gull Wing 2000CycleSwitchCycle 254mm SMD TR (Alt: 76HPSB04GWRT) RoHS : Compliant | 0 | |||
| 76HPSB10GWRT | Grayhill Inc | Switch DIP ON OFF SPST 10 Piano 015A 30VDC Gull Wing 2000CycleSwitchCycle 254mm SMD TR (Alt: 76HPSB10GWRT) RoHS : Compliant | 0 | |||
| P276HH332M275A | KEMET Corporation | Safety Capacitor Metallized Paper Radial Box 2 Pin 3300 pF 20 X2 Through Hole 275 VAC (Alt: PME271M433MR30) RoHS : Compliant | 0 | |||
| CX2016SA24576H0HRSG1 | Kyocera AVX Components | Crystal Fundamental 24576MHz 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0HRSG1) RoHS : Compliant | 0 | |||
| CX2016SA24576H0GPSCC | Kyocera AVX Components | Crystal Fundamental 24576MHz 15ppm 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0GPSCC) RoHS : Compliant | 0 | |||
| CX2016SA24576H0HSSG1 | Kyocera AVX Components | Crystal Fundamental 24576MHz 50ppm 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0HSSG1) RoHS : Compliant | 0 | |||
| CX3225SB24576H0FLJCC | Kyocera AVX Components | (Alt: CX3225SB24576H0FLJCC) RoHS : Compliant | 0 | |||
| CX2016SA24576H0FLLG1 | Kyocera AVX Components | Crystal Fundamental 24576MHz 20ppm 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0FLLG1) RoHS : Compliant | 0 | |||
| CX2016SA24576H0HSSCC | Kyocera AVX Components | Crystal Fundamental 24576MHz 50ppm 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0HSSCC) RoHS : Compliant | 0 | |||
| CX2016SA24576H0PSVCC | Kyocera AVX Components | Crystal Fundamental 24576MHz 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0PSVCC) RoHS : Compliant | 0 | |||
| CX3225SB24576H0KESZZ | Kyocera AVX Components | Crystal Fundamental 24576MHz 12pF 32mm x 25mm SMD 4Pin (Alt: CX3225SB24576H0KESZZ) RoHS : Compliant | 0 | |||
| CX2016SA24576H0HRSCC | Kyocera AVX Components | Crystal Fundamental 24576MHz 12pF 2mm x 16mm SMD 4Pin (Alt: CX2016SA24576H0HRSCC) RoHS : Compliant | 0 | |||
![]() Avnet Asia | G876H061THR | Amphenol Corporation | (Alt: G876H061THR) RoHS : Compliant | 0 | ||
| G876H031THR | Amphenol Corporation | BOARD IN CONNECTOR,HOUSING (Alt: G876H031THR) RoHS : Compliant | 0 | |||
| G876H101THR | Amphenol Corporation | (Alt: G876H101THR) RoHS : Compliant | 0 | |||
![]() Avnet Silica | TFS1176H | Microchip Technology Inc | (Alt: TFS1176H) RoHS : Compliant | 0 | ||
| DA9063-76HK1 | Renesas Electronics Corporation | System PMIC 100Pin VFBGA Tray (Alt: DA9063-76HK1) RoHS : Compliant | 0 | |||
| ISL62776HRTZ | Renesas Electronics Corporation | (Alt: ISL62776HRTZ) RoHS : Compliant | 0 | |||
| MP1676HGTL-Z | Monolithic Power Systems | SOT583 16V 6A 12MHz StepDown Converter (Alt: MP1676HGTL-Z) RoHS : Compliant | 0 | |||
| MIC2776H-YM5-TR | Microchip Technology Inc | (Alt: MIC2776H-YM5-TR) RoHS : Compliant | 0 | |||
| M38224M6A-376HP#U0 | Renesas Electronics Corporation | MCU 8Bit 3822 740 CISC 24KB MROM 5V 80Pin LFQFP Tray (Alt: M38224M6A-376HP#U0) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | S76HL512TC0BHB003 | 5,000 | ||||
![]() Component Electronics, Inc | FRU76H1815 | VxI Power Limited | IN STOCK SHIP TODAY |
| 864 | |
| 76HPSB08GWR | Grayhill Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 209 | ||
LT1376HVCS8![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 14 | ||
| 76HPSB08GW | Grayhill Inc | IN STOCK SHIP TODAY |
| 8 | ||
LM2576HVT-12/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | 11876H | Heyco | SPPR 122-039 HR TAN | 0 | ||
![]() EBV Elektronik | BF776H6327XTSA1![]() | Infineon Technologies AG | Bipolar RF Transistor NPN 4 V 46 GHz 200 mW 50 mA SOT343 (Alt: SP000745164) RoHS : Compliant | 0 | ||
| MIC2776H-YM5-TR | Microchip Technology Inc | (Alt: MIC2776H-YM5-TR) RoHS : Compliant | 0 | |||
| S76HL512TC0BHB003 | Infineon Technologies AG | Combo Memory 8Bit 64 Mbit DDR 512 Mbit NOR Based MCP 24 Pins FBGA (Alt: SP005728098) RoHS : Compliant | 0 | |||
| S76HL512TC0BHB000 | Infineon Technologies AG | Combo Memory 8Bit 64 Mbit DDR 512 Mbit NOR Based MCP 24 Pins FBGA (Alt: SP005728095) RoHS : Compliant | 0 | |||
![]() FDH Electronics | C135A376H030 | SOURIAU-SUNBANK | Connector Acc | 67 | ||
| BJ376HS | Cinch Connectivity Solutions | RF / Coaxial RoHS : Compliant |
| 32 | ||
| 340HS002NF17-6H12E | Glenair Inc | Backshells & Ac |
| 4 | ||
| 4567776H | Aptiv PLC | Cable Assembly |
| 0 | ||
| MWDM2L-15P-6K7-6H | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 76H1-15-1-B | TE Connectivity | Harness Mgmt RoHS : Not Compliant | 0 | |||
| 76H1-19-1-B | TE Connectivity | Harness Mgmt RoHS : Not Compliant | 0 | |||
| MWDM2L-15S-6K7-6H | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| MWDM3L-15P-6K7-6H | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 76H1-13-1-B | TE Connectivity | Harness Mgmt RoHS : Not Compliant | 0 | |||
![]() Maritex | LM2576HVT-ADJ/NOPB![]() | Texas Instruments | DC DC Converters; LM2576HVT-ADJ/NOPB; TEXAS INSTRUMENTS; 5; Buck; 1; 8.51 mm RoHS : Compliant |
| 285 | |
PCF85176H/1![]() | NXP Semiconductors | LED Drivers; PCF85176H/1; NXP SEMICONDUCTORS; 5.5 V; 64; Surface Mount RoHS : Compliant |
| 62 | ||
![]() Master Electronics | 76HPSB08GWRT | Grayhill Inc | Switch DIP ON OFF SPST 8 Piano 0.15A 30VDC Gull Wing 2000Cycles/SwitchCycles 2.54mm SMD T/R RoHS : Compliant |
| 8,610 | |
| 76HPSB04GWRT | Grayhill Inc | Switch DIP ON OFF SPST 4 Piano 0.15A 30VDC Gull Wing 2000Cycles/SwitchCycles 2.54mm SMD T/R RoHS : Compliant |
| 3,393 | ||
| 76HPSB10GWRT | Grayhill Inc | The 76HPSB10GWRT is a 10-position side-actuated surface-mount PIANO-DIP® switch designed for SMT assembly processes. RoHS : Compliant |
| 2,000 | ||
| 76HPSB02GWRT | Grayhill Inc | Switch DIP ON OFF SPST 2 Piano 0.15A 30VDC Gull Wing 2000Cycles/SwitchCycles 2.54mm SMD T/R RoHS : Compliant |
| 1,000 | ||
| RSF76H050TV | Cynergy3 Components | Horiz SPNO 100VA PPS 50 cm ETFE 7/0.2 wires Viton seal RoHS : Compliant |
| 15 | ||
| XZ203676HSC | Honeywell Sensing and Control | Board Mount Pressure Sensors 400-1200 RANGE SENSORS RoHS : Not Compliant |
| 0 | ||
| VA1176HB-00000-000 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| 76H1-11-1-B | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 76H1-17-1-B | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| C785A-10DP76HDG | Thomas & Betts | Support - Adjustable Pipe Saddle - Size 10 Inch - Hot-Dip Galvanized Steel - Furnished with 76 Inch Stanchion. RoHS : Compliant |
| 0 | ||
| 76H1-D13-1-C | TE Connectivity | Backshell for Circular Connectors 13 Size Straight Aluminum Electroless Nickel Plated RoHS : Compliant |
| 0 | ||
| 76H1-09-1-B | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 76H1-D11-1-C | TE Connectivity | Heat Shrink Boot Backshell for MIL-DTL-38999 III/IV Circular Connectors 11 Shell Size Straight RoHS : Compliant |
| 0 | ||
| 76H1-15-1-B | TE Connectivity | Heat Shrink Boot Backshell for MIL-DTL-38999 III/IV Circular Connectors 15 Shell Size Straight MOQ Reduction RoHS : Compliant |
| 0 | ||
| 76HPSB02GWT | Grayhill Inc | Switch DIP ON OFF SPST 2 Piano 0.15A 30VDC Gull Wing 2000Cycle/SwitchCycle 2.54mm SMD T/R RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 76HPSB04GWRT | Grayhill Inc | DIP Switches / SIP Switches DIPSwitch SPST Piano DIP Gull Wing 4 Pos RoHS : Compliant |
| 50 | |
| 76HPSB08GWRT | Grayhill Inc | Switch; DIP; 8 Pos. SPST; Side toggle; 0.15A; 30VDC; Gull wing term; Tape seal RoHS : Compliant |
| 50 | ||
| 76HPSB02GWRT | Grayhill Inc | DIP Switches / SIP Switches DIPSwitch SPST Piano DIP Gull Wing 2 Pos RoHS : Compliant |
| 50 | ||
| 76HPSB06GWRT | Grayhill Inc | Dip Switch, SPST, 6 Pos., Raised Actuator, Piano, 150mA, 30VDC, R/A Gull Wing RoHS : Compliant |
| 50 | ||
| EN-76HE-K | Emo Systems Inc | Modular Connectors / Ethernet Connectors 6 kV AC 10Gb/s Keystone Network Isolator, straight |
| 0 | ||
| EN-76HE | Emo Systems Inc | Modular Connectors / Ethernet Connectors 6 kV AC 10Gb/s Network Isolator, straight |
| 0 | ||
| EN-76HE-S | Emo Systems Inc | Modular Connectors / Ethernet Connectors 6 kV AC 10Gb/s Snap-Fit Network Isolator, straight |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03376/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Low Loss Cable Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W03376/HS can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03376/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W03376/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03376/HS can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 7,650 | ||
| PE3C0076/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C0076/HS-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0076/HS-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C0076/HS-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,925 | ||
| PE3W05876/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W05876/HS-12 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W05876/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-240-UF coax with heatshrink. |
| 1,584 | ||
| PE3C2076/HS-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male to BNC Male Low Loss Cable 150 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 150 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 150 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C2076/HS-150CM, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2076/HS-150CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2076/HS-150CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 150 cm length using LMR-195 coax with heatshrink. |
| 1,172 | ||
| PE3W14476/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMA female to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W14476/HS-24 can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14476/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our SMA female to right angle SMA male cable has a maximum VSWR of 1.28:1. SMA jack to SMA plug cable assembly PE3W14476/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14476/HS-24 can also be used in the other direction and will be a right angle SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 790 | ||
| PE3W12076/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Plug to N Female Low Loss Cable 60 Inch Length Using LMR-400-DB Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female low loss cable 60 inch length using LMR-400-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug to N female low loss cable 60 inch length using LMR-400-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a type N cable connection on the other. Our low loss reverse polarity SMA to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W12076/HS-60 can also be known as a low loss reverse polarity SMA male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12076/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA plug to type N female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to type N jack cable assembly PE3W12076/HS-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12076/HS-60 can also be used in the other direction and will be a type N female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 43 | ||
| PE3W06676/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W06676/HS is a SMA male to TNC male cable using LMR-240-DB coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06676/HS SMA male to TNC male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 2 | |||
| PE3W13976/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Jack Bulkhead to TNC Male Low Loss Cable 60 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to TNC male low loss cable 60 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to TNC male low loss cable 60 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss SMB to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W13976/HS-60 can also be known as a low loss SMB female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13976/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. SMB female to TNC plug cable assembly PE3W13976/HS-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13976/HS-60 can also be used in the other direction and will be a TNC male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01576/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Male to D-Sub Plug Cable Using RG58 Coax with HeatShrink. PE3W01576/HS is a BNC male to D-Sub plug cable using RG58 coax. This Pasternack BNC male to D-Sub plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm D-Sub for connector 2. Our male BNC to plug D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01576/HS BNC male to D-Sub plug cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W13976/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMB Jack Bulkhead to TNC Male Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to TNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to TNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss SMB to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W13976/HS-300 can also be known as a low loss SMB female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13976/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. SMB female to TNC plug cable assembly PE3W13976/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13976/HS-300 can also be used in the other direction and will be a TNC male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE35276/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to MCX Plug Right Angle Cable Using RG316-DS Coax with HeatShrink In 24 Inch Length., Radio frequency assembly N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 24 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 24 inch length, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle MCX cable connection on the other. Our N type to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. This type N to MCX cable is a male to plug coax assembly, PE35276/HS-24, can also be known as a N type plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. Type N plug to MCX male cable assembly PE35276/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35276/HS-24 can also be used in the other direction and will be right angle MCX plug to type N male cable assembly if the opposite connectivity is required. N type plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to MCX cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 24 inch length. |
| 0 | ||
| PE3W14676/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity SMA Female Cable Using LMR-400 Coax with HeatShrink. PE3W14676/HS is a TNC male to reverse polarity SMA female cable using LMR-400 coax. This Pasternack TNC male to reverse polarity SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14676/HS TNC male to SMA reverse polarity female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1576/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 24 inch length using PE-P195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 24 inch length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1576/HS-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1576/HS-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 24 inch length using PE-P195 coax with heatshrink. |
| 0 | ||
| PE3W13976/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Jack Bulkhead to TNC Male Low Loss Cable 36 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly SMB jack bulkhead to TNC male low loss cable 36 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to TNC male low loss cable 36 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss SMB to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W13976/HS-36 can also be known as a low loss SMB female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13976/HS-36 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. SMB female to TNC plug cable assembly PE3W13976/HS-36 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13976/HS-36 can also be used in the other direction and will be a TNC male to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to TNC cable assembly for quick shipment worldwide. Variations of SMB and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE35276/HS-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. N Male to MCX Plug Right Angle Cable Using RG316-DS Coax with HeatShrink In 150 CM Length., Radio frequency assembly N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 150 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 150 cm length, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle MCX cable connection on the other. Our N type to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. This type N to MCX cable is a male to plug coax assembly, PE35276/HS-150CM, can also be known as a N type plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. Type N plug to MCX male cable assembly PE35276/HS-150CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35276/HS-150CM can also be used in the other direction and will be right angle MCX plug to type N male cable assembly if the opposite connectivity is required. Type N plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to MCX cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to MCX plug right angle cable using RG316-DS coax with heatshrink in 150 cm length. |
| 0 | ||
![]() Vyrian | LT1076HVCT#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Compliant | 12,108 | ||
| LT1076HVCR | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PSSO7 RoHS : Not Compliant | 11,765 | |||
| LT1076HVCT-5 | Analog Devices Inc | Switching Regulator, Voltage-mode, 3.2A, 120kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Not Compliant | 11,571 | |||
| LT1076HVCT#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PZFM7 RoHS : Compliant | 11,286 | |||
| LT1076HVCR-PBF | Analog Devices Inc | 10,781 | ||||
| LT1076HVCR#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PSSO7 RoHS : Compliant | 10,356 | |||
| LT1076HVCT-5#TR | Analog Devices Inc | Switching Regulator, Voltage-mode, 3.2A, 120kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Not Compliant | 10,203 | |||
| LT1076HVCT | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PZFM7 RoHS : Not Compliant | 10,135 | |||
| LT1076HVCR#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PSSO7 RoHS : Compliant | 8,245 | |||
| LT1076HVCR#TR | Analog Devices Inc | Switching Regulator, Current-mode, 3.2A, 125kHz Switching Freq-Max, BIPolar, PSSO7 RoHS : Not Compliant | 7,471 | |||
| LT1076HVCR-TRPBF | Analog Devices Inc | 7,354 | ||||
| LT1076HVCT-5#TRPBF | Analog Devices Inc | Switching Regulator, Voltage-mode, 3.2A, 120kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Compliant | 5,949 | |||
| LT1076HVCK | Analog Devices Inc | Switching Regulator/Controller | 5,829 | |||
| LT1076HVCT-06PBF | Analog Devices Inc | 5,709 | ||||
| LT1076HVCT-5#PBF | Analog Devices Inc | Switching Regulator, Voltage-mode, 3.2A, 120kHz Switching Freq-Max, BIPolar, PZFM5 RoHS : Compliant | 4,944 | |||
![]() Win Source Electronics | LM2576HVS-ADJ/NOPB![]() | Texas Instruments | IC REG BUCK ADJ 3A DDPAK RoHS : Compliant |
| 64,170 | |
LM2576HVS-ADJ![]() | Texas Instruments | IC REG BUCK ADJ 3A DDPAK RoHS : Not Compliant |
| 64,030 | ||
LM2576HVS-5.0![]() | Texas Instruments | IC REG BUCK 5V 3A TO263-5 RoHS : Not Compliant |
| 30,000 | ||
LM2576HVT-ADJ![]() | Texas Instruments | IC REG BUCK ADJ 3A TO220-5 RoHS : Not Compliant |
| 18,936 | ||
| LM2576HVSX-5 | National Semiconductor Corporation |
| 12,400 | |||
LM2576HVT-ADJ/LB03![]() | Texas Instruments | IC REG BUCK ADJ 3A TO220-5 / Conv DC-DC 4V to 60V Inv/Step Down Single-Out 1.23V to 57V 3A 5-Pin(5+Tab) TO-220 Tube RoHS : Not Compliant |
| 9,300 | ||
LM2576HVSX-12/NOPB![]() | Texas Instruments | LM2576/LM2576HV Series SIMPLE SWITCHER® 3A Step-Down Voltage Regulator RoHS : Compliant |
| 7,150 | ||
LM2576HVS-12![]() | Texas Instruments | LM2576/LM2576HV Series SIMPLE SWITCHER® 3A Step-Down Voltage Regulator | IC REG BUCK 12V 3A TO263-5 RoHS : Not Compliant |
| 6,970 | ||
LM2576HVS-12/NOPB![]() | Texas Instruments | IC REG BUCK 12V 3A TO263-5 RoHS : Compliant |
| 6,910 | ||
| PCA85176H/Q900/1 | Nexperia |
| 5,293 | |||
LT1376HVIS8#PBF![]() | Linear Technology | IC REG BUCK SEPIC ADJ 1.5A 8SOIC RoHS : Compliant |
| 2,655 | ||
LT1376HVIS8#TRPBF![]() | Linear Technology | IC REG BUCK SEPIC ADJ 1.5A 8SOIC RoHS : Compliant |
| 666 | ||
LT1076HVIR![]() | Linear Technology | Step-Down Switching Regulator RoHS : Not Compliant |
| 493 | ||
LT1076HVIR#PBF![]() | Linear Technology | IC REG MULT CONFG INV ADJ 2A 7DD / Conv DC-DC 7.3V to 64V Synchronous Step Down Single-Out 2.5V to 50V 10A 8-Pin(7+Tab) DDPAK Tube RoHS : Compliant |
| 450 | ||
| LTC3676HUJ#TRPBF | Analog Devices Inc | IC REG CONV I.MX6 7OUT 40QFN / - Converter, i.MX6 Voltage Regulator IC 7 Output 40-QFN (6x6) RoHS : Compliant |
| 53 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |