800CCNUWNTZCWC Price, Distributor, Stock

Key Specifications, Type: Biased, Detector Polarity: Positive, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 18 GHz, Maximum Frequency: 26 GHz, Connector In Impedance: 50 Ohm. Biased Detector, SMA, Positive Video Out, 18 GHz to 26 GHz. Pasternack biased detector PE8009-P is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This biased detector is manufactured with SMA male to SMA female connectors. Our SMA biased detector has a minimum frequency of 18 GHz and a maximum frequency of 26 GHz. This SMA coaxial RF detector has a maximum input power of 23 dBm and a video capacitance of 5 pF. PE8009-P coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our biased detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $462.99
5 : $444.47
10 : $425.95

PE3800-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using RG223 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 6 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 6 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800-6, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800-6 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800-6 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 6 inch length using RG223 coax.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41

PE3C8000-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402-LF, RF Cable Type: TFT-402-LF, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 12 Inch Length Using TFT-402-LF Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle type N cable connection on one end and right angle N type cable connection on the other. Our low PIM right angle type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C8000-12, can also be known as a low PIM right angle N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C8000-12 is built with TFT-402-LF which is a flexible coax type. The Pasternack low passive intermodulation flexible N cable assembly is manufactured with right angle N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle low PIM cable 12 inch length using TFT-402-LF coax using Times Microwave components.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE3C8002-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. N Male to N Female Bulkhead Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8002-50CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8002-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8002-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8002-50CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3C8004

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C8004, can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C8004 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency low PIM NEX10 male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8004 can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 male right angle low PIM cable using TFT-5G-402 coax using Times Microwave components.

PE3W08008

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Female Cable Using PE-C240 Coax. PE3W08008 is a reverse polarity SMA female to N female cable using PE-C240 coax. This Pasternack reverse polarity SMA female to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08008 SMA reverse polarity female to N female cable assembly is constructed with PE-C240 coax.

PE3W22800LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to N Female Bulkhead Cable Using LMR-100 Coax, LF Solder. PE3W22800LF is a BNC female bulkhead to N female bulkhead cable using LMR-100A coax. This Pasternack BNC female bulkhead to N female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our female BNC bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22800LF BNC female bulkhead to N female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C6800/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Plug Cable Using LMR-100 Coax with HeatShrink. PE3C6800/HS is a reverse polarity SMA male to FAKRA plug cable using LMR-100A coax. This Pasternack reverse polarity SMA male to FAKRA plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our reverse polarity male SMA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6800/HS SMA reverse polarity male to FAKRA plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C8000-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. N Male Right Angle to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8000-100CM can also be known as a low PIM right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.37-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8000-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8000-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3C8003-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. NEX10 Male to NEX10 Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-150CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C8006-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. QMA Male to QMA Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to QMA male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8006-36, can also be known as a low PIM QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8006-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8006-36 can also be used in the other direction and will be right angle QMA male to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male right angle low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE3W12800/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. QMA Male to 2.2-5 Male Cable Using TFT-5G-402 Coax with HeatShrink. PE3W12800/HS is a QMA male to 2.2-5 male cable using TFT-5G-402 coax. This Pasternack QMA male to 2.2-5 male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm 2.2-5 for connector 2. Our male QMA to male 2.2-5 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12800/HS QMA male to 2.2-5 male cable assembly is constructed with TFT-5G-402 coax.

PE3C5800

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using LMR-400-UF Coax., Radio frequency assembly N male right angle to N female cable using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female cable using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and N type cable connection on the other. Our right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C5800, can also be known as a right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C5800 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5800 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. N type right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female cable using LMR-400-UF coax.

PE3C8008-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C8008-24, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C8008-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE3C8002-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. N Male to N Female Bulkhead Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female bulkhead low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female bulkhead low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8002-100CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8002-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8002-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8002-100CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

TE Connectivity

0528-001-5005

TE Connectivity

BKSHL, 50P, BLK, PLG, RA, NW 17 Number of Positions: 50 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Cable Exit Angle: 90 ° Strain Relief: Without 50 Black Backshell 90 ° | TE Connectivity
RoHS : Compliant

1 : $8.07

52,393

1-2842480-0

TE Connectivity

10P Spring TB Plug w/ Flg 3.5, GN Number of Positions: 10 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Ampseal Header | 10 Plug Wire-to-Board .137" | .137" | TE Connectivity
RoHS : Compliant

2,500 : $4.86
1,000 : $4.99
500 : $5.12
250 : $5.26
100 : $5.39
50 : $5.52
25 : $5.65
10 : $5.78
1 : $5.91

811

2-2842480-0

TE Connectivity

20P Spring TB Plug w/ Flg 3.5, GN Number of Positions: 20 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Ampseal Header | 20 Plug Wire-to-Board .137" | .137" | TE Connectivity
RoHS : Compliant

2,500 : $9.52
1,000 : $9.77
500 : $10.03
250 : $10.29
100 : $10.54
50 : $10.8
25 : $11.06
10 : $11.32
1 : $11.57

702

2-748003-0

TE Connectivity

09 PLUG SP/FMS BRDLK Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 Ampseal Header | 9 Plug Board-to-Board Board Mount | 1 | TE Connectivity
RoHS : Compliant

1,000 : $4.05
500 : $4.16
250 : $4.29
100 : $4.44
50 : $4.57
1 : $5.01

595

20026498-00

TE Connectivity

NTC,10K ,SS HEX HSG,TEMP,SENSOR NTC Probe Type: NTC Probe Electrical Connection: Connector 2 Pin Resistance (at 25°C): 10000 kΩ β-Value(25/85): 3976 K Accuracy (at T_ref): ± .5 °C NTC Probe Connector 2 Pin | TE Connectivity
RoHS : Compliant

1 : $28.67

498

1375800-1

TE Connectivity

ASSY, 120 POS PC104 PLUS Number of Positions: 120 Centerline (Pitch): .079 in Centerline (Pitch): 2 mm Number of Loaded Positions: 120 Contact Current Rating (Max): 3 A 120 .079" 2 mm | .079" | TE Connectivity
RoHS : Compliant

10,000 : $27.61
5,000 : $28.22
2,500 : $28.84
1,000 : $29.45
500 : $30.06
250 : $30.68
100 : $31.29
50 : $31.9
25 : $32.52
10 : $33.13
1 : $33.75

153

0528-004-3805

TE Connectivity

BKSHL, 38P, BLK, PLG, RA Number of Positions: 38 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Cable Exit Angle: 90 ° Strain Relief: Without 38 Black Backshell 90 ° | TE Connectivity
RoHS : Compliant

1 : $3.84

148

1SNG608002R0000

TE Connectivity

EM-LN-M16-MET-A Cable Gland Product Type: Lock Nut Primary Product Material: Brass Primary Product Plating Material: Nickel Outer Thread Type: Metric Outer Thread Size: M16 x 1.5 Lock Nut Brass Nickel Metric | TE Connectivity
RoHS : Compliant

50 : $0.56
25 : $0.59
10 : $0.62
1 : $0.66

139

1SNG618008R0000

TE Connectivity

EP-RJG-M25-GR-A Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: RJ45 Type Primary Product Material: PA 6 Clamping Diameter Range: 3 – 6 mm Primary Product Color: Gray Cable Gland RJ45 Type PA 6 3 – 6 mm | Gray | TE Connectivity
RoHS : Compliant

500 : $4.78
250 : $4.94
100 : $5.11
50 : $5.27
25 : $5.44
10 : $5.6
1 : $5.77

1SNG608003R0000

TE Connectivity

EM-LN-M20-MET-A Cable Gland Product Type: Lock Nut Primary Product Material: Brass Primary Product Plating Material: Nickel Outer Thread Type: Metric Outer Thread Size: M20 x 1.5 Lock Nut Brass Nickel Metric | TE Connectivity
RoHS : Compliant

50 : $0.84
25 : $0.89
10 : $0.94
1 : $0.99

10131380-00

TE Connectivity

OPS3 C4-A 12/24V TE Connectivity
RoHS : Compliant

1 : $449.75

1SNG608006R0000

TE Connectivity

EM-LN-M40-MET-A Cable Gland Product Type: Lock Nut Primary Product Material: Brass Primary Product Plating Material: Nickel Outer Thread Type: Metric Outer Thread Size: M40 x 1.5 Lock Nut Brass Nickel Metric | TE Connectivity
RoHS : Compliant

10 : $5.68
1 : $6.31

02560408-000

TE Connectivity

LVDT MHR 050 ASSY Linearity Error (Full Range): ±.25 % Case Material: Stainless Steel Product Diameter: .375 in Product Shape: Cylindrical Supply Voltage Range: 3 V ±.25 % Stainless Steel .375" Cylindrical | TE Connectivity
RoHS : Compliant

1 : $289.65

20029980-00

TE Connectivity

SAT PROBE-RTD PT100 2000mm ENG MODEL RTD Sensor Type: Space Qualified RTD Element Type: Thin Film Element Material: Platinum Lead Wire Style: Polyimide insulated Operating Temperature (Max): 257 °F -274 °F Space Qualified RTD Thin Film Platinum Polyimide insulated | TE Connectivity
RoHS : Compliant

1 : $413.9

1-2405080-0

TE Connectivity

75 AHV D BS TE Connectivity
RoHS : Compliant

1 : $1,683.65

Teledyne HiRel

5962-9080001MFA

Teledyne HiRel

5962-9758001QEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000301UA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

8001901DA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-9758001Q2A

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000306YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

8000305QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ

8000305YC

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 10 MHZ, GOLD LEAD FINISH

8000303XA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 6.0 MHZ

5962-9218001MRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

8000302YA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9758001QFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8000302QA

Teledyne HiRel

MICROPROCESSOR, 16-BIT, 4.0 MHZ

5962-9218001MSA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

80019012A

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

CR1206-8W-1800FT

VENKEL LTD

Chip Resistor;1206;1/8W;180R;�1%
RoHS : Compliant

AGCR1206-TK-1800FT

VENKEL LTD

Auto Grade Resistor;1206;1/4W;�100PPM;180R;�1%
RoHS : Compliant

MELFC0102-RZ-2800DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;280R;�0.5%
RoHS : Compliant

MELFC0204-TN-1800DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;180R;�0.5%
RoHS : Compliant

MELFC0204-ZE-6800FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�25PPM;680R;�1%
RoHS : Compliant

MELFC0204-ZN-1800BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;180R;�0.1%
RoHS : Compliant

MELFC0207-XE-2800CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�25PPM;280R;�0.25%
RoHS : Compliant

MELFC0207-XZ-2800DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;280R;�0.5%
RoHS : Compliant

MELFM0204-ZE-2800FT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;280R;�1%
RoHS : Not Compliant

UPTF0402-16W-N-2800AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;280R;�0.05%
RoHS : Compliant

UPTF0402-16W-P-2800UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;280R;�0.01%
RoHS : Compliant

UPTF0603-16W-E-1800AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;180R;�0.05%
RoHS : Compliant

UPTF1206-8W-N-1800AT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;180R;�0.05%
RoHS : Compliant

TFCR0402-16W-C-6800FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;680R;�1%
RoHS : Compliant

TFCR0402-16W-E-1800FT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;180R;�1%
RoHS : Compliant

Waytek, Inc.

19038-0009

Molex

16-14 GA .156 Female Bullet Terminal Nylon Insulation
RoHS : Compliant

50 : $0.202
200 : $0.1883
500 : $0.1753
1,000 : $0.1616
5,000 : $0.1535

26,195

19128-0021

Molex

16-14 GA #6 Spade Terminal Non-Insulated

100 : $0.1082
200 : $0.0984
500 : $0.0879
1,000 : $0.0795
5,000 : $0.0759

16,622

19128-0055

Molex

16-14 GA #10 Spade Terminal Non-Insulated

100 : $0.1006
200 : $0.0913
500 : $0.0816
1,000 : $0.0738
5,000 : $0.0704

7,209

380-08602

Carling Technologies

Nickel Hex Face Nut for Toggle Switches 15/32" Threads

25 : $0.6198
50 : $0.5584
100 : $0.5081
200 : $0.4663
500 : $0.4439
1,000 : $0.43

1,327

380-08810

Carling Technologies

Dress Knurled Nickel Face Nut 15/32" for Toggle Switches

10 : $1.7029
50 : $1.5159
100 : $1.3739
200 : $1.3288
500 : $1.2836
1,000 : $1.2386

796

506-11318-001

Carling Technologies

Carling Technologies 506-11318-001 Contura switch body boot is a protective boot for Carling Contura rocker switch bodies. Designed for use with the switch body sold separately, it helps complete modular Contura switch assemblies where added switch body protection is required.

1 : $7.02
50 : $5.86
100 : $5.1
200 : $4.78
500 : $4.59

313

8006K46N1V2

Eaton Electronics

Eaton 8006K46N1V2 Euro SR rocker switch is a sealed, non-illuminated DPDT switch with On-None-On action. It uses snap-in mounting, 0.250" spade terminals, a black two-face rocker, and ratings of 15A at 125VAC, 10A at 250VAC, and 15A at 28VDC.

1 : $15.92
10 : $14.21
50 : $13.03
100 : $12.64
200 : $12.25
500 : $11.86

169

1800-E1-1-2E-0150-12

15A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $21.71
5 : $19.39
10 : $18.13
50 : $17.17
100 : $16.29
200 : $15.52

127

1800-E1-1-2E-0100-12

10A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $21.71
5 : $19.39
10 : $18.13
50 : $17.17
100 : $16.29
200 : $15.52

120

8006K40N1V2

Eaton Electronics

Eaton 8006K40N1V2 Euro SR rocker switch is a sealed, non-illuminated DPDT switch with On-Off-On action. It uses snap-in mounting, 0.250" spade terminals, a black two-face rocker, and ratings of 15A at 125VAC, 10A at 250VAC, and 15A at 28VDC.

1 : $14.06
10 : $13.53
50 : $13.09
100 : $12.39
200 : $11.95
500 : $11.6

8007K20N314V22

Eaton Electronics

Eaton 8007K20N314V22 Euro SR rocker switch is a sealed illuminated SPDT On-Off-On switch with two red lenses and a 14VDC bulb. It uses snap-in mounting, 0.250" spade terminals, dependent lamp wiring, and a matte black two-face rocker.

1 : $20.34
10 : $18.16
50 : $16.66
100 : $16.15
200 : $15.65
500 : $15.15

880094

Littelfuse Inc

PDM Power Dist Mod W/O Bat Main (Vendor DISCO'd)

1 : $181.31
5 : $173.7
10 : $167.05
25 : $156.62

672-P01-080-04

67 Series Red Battery Disconnect w/Integrated Manual Reset Breaker,80A,32VDC, 2 Pos

1 : $70.36
5 : $69.18
10 : $68.01
50 : $66.84
100 : $65.67

8006K23N1V2

Eaton Electronics

Eaton 8006K23N1V2 Euro SR rocker switch is a sealed, non-illuminated SPST On-Off switch with snap-in mounting and 0.250" spade terminals. The black two-face rocker carries 15A at 125VAC, 10A at 250VAC, and 15A at 28VDC ratings.

1 : $14.28
10 : $13.28
50 : $12.63
100 : $12.37
200 : $12.12
500 : $11.92

94018-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 94018-0002 LED 30W 12V 215,000 CANDLE 50,000 HOURS

1 : $209.83
5 : $208.08
10 : $204.61

Win Source Electronics

FM8002A

Shenzhen Fuman Electronic Group Co Ltd

9,650 : $0.0311
7,205 : $0.0347
5,575 : $0.0359
4,045 : $0.0371
2,615 : $0.0383
1,075 : $0.0466

158,000

503480-0800

Molex

RoHS : Compliant

1,610 : $0.1866
1,205 : $0.2082
930 : $0.2153
675 : $0.2225
440 : $0.2297
180 : $0.2799

59,633

5034800800

Molex

CONN FFC FPC 8POS 0.5MM R/A
RoHS : Compliant

1,610 : $0.1866
1,205 : $0.2082
930 : $0.2153
675 : $0.2225
440 : $0.2297
180 : $0.2799

59,633

ABM3-8.000MHZ-D2Y-T

Abracon Corporation

CRYSTAL 8.0000MHZ 18PF SMD
RoHS : Compliant

1,010 : $0.2978
755 : $0.3321
585 : $0.3436
425 : $0.355
275 : $0.3665
115 : $0.4466

47,987

BTA416Y-800B

Nexperia

16 A Three-quadrant triacs, insulated, high commutation, high temperature

575 : $0.522
430 : $0.5822
335 : $0.6023
245 : $0.6224
160 : $0.6425
65 : $0.783

38,600

VN800PS-E

STMicroelectronics

Thermal shutdown protection and diagnosis
RoHS : Compliant

405 : $0.7429
305 : $0.8286
235 : $0.8572
170 : $0.8858
110 : $0.9143
45 : $1.1143

30,000

BTA2008W-800D

Nexperia

3Q Hi-Com Triac

1,800 : $0.1867
1,440 : $0.1945
1,110 : $0.2023
775 : $0.2178
500 : $0.2256
235 : $0.2411

19,350

AP8800SG-13

Diodes Incorporated

IC LED DRVR RGLTR DIM 350MA 8SOP
RoHS : Compliant

990 : $0.3936
790 : $0.41
610 : $0.4264
425 : $0.4591
275 : $0.4756
130 : $0.5083

15,800

ABMM2-8.000MHZ-E2-T

Abracon Corporation

CRYSTAL 8.0000MHZ 18PF SMD
RoHS : Compliant

535 : $0.5654
400 : $0.6306
310 : $0.6524
225 : $0.6741
145 : $0.6959
60 : $0.8481

8,000

EN29LV800BB-70BIP

Eon Silicon Solution Inc

8 Megabit (1024K x 8-bit / 512K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 3.0 Volt-only
RoHS : Compliant

110 : $3.5529
82 : $3.9628
64 : $4.0994
46 : $4.2362
30 : $4.3728
13 : $5.3294

5,895

0670688000

Molex

CONN RCPT USB2.0 TYPEB 4POS R/A
RoHS : Compliant

495 : $0.6788
370 : $0.7571
290 : $0.7832
210 : $0.8093
135 : $0.8354
55 : $1.0182

5,500

BTA08-800CW3G

Littelfuse Inc

TRIAC 800V 8A TO220AB
RoHS : Compliant

395 : $0.7675
295 : $0.856
230 : $0.8855
165 : $0.9151
110 : $0.9446
45 : $1.1512

5,124

XC3SD1800A-4CSG484I

AMD Xilinx

IC FPGA 309 I/O 484CSBGA
RoHS : Compliant

3 : $146.8192
2 : $163.7599
1 : $169.4068

3,000

CG2800L

Littelfuse Inc

GDT 800V 10KA 2 POLE TH / Gas Discharge Tube 800 V 10000A (10kA) 2 Pole Through Hole
RoHS : Compliant

108 : $2.7782
81 : $3.0988
63 : $3.2056
46 : $3.3125
30 : $3.4193
12 : $4.1673

1,300

ADC12D1800RFIUT/NOPB

Texas Instruments

IC ADC 12BIT 3.6GSPS 292BGA
RoHS : Compliant

1 : $1,738.5076

Wuhan P&S

10098678-002C-TRLF

Amphenol FCi

SAS:29 Position Right Angle SM Plug
RoHS : Compliant

1 : $2.0
100 : $1.93
500 : $1.88
1,000 : $1.85

600

800CCNUWNTZCWC Distributor

Link URL