 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
816L-R-TM3-C-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 ComSIT USA | 20816 | WELL GROUP PRODUCTS | AVAILABLE EU | 215 | ||
| 4816P1102LF | Bourns Inc | AVAILABLE EU | 1,388 | |||
| GPVOUS0080AC0816 | The Bergquist Company | AVAILABLE EU | 114 | |||
| MP28164GDZ | MONOLITHIC POWER SYSTEMS (MPS) | AVAILABLE EU | 16,408 | |||
| RR0816P393D | Susumu Co Ltd | AVAILABLE EU | 65,418 | |||
| 1300008161 | GENBAND | AVAILABLE EU | 1,089 | |||
| ASY0816403 | TENERE INC - MONTERREY MEXICO | AVAILABLE EU | 5 | |||
ComSIT USA | GWJDSTS2EMH3H6XX38165BR18XX | OSRAM GmbH | LED Lighting White, Warm 2700K 80 4-SMD RoHS : Compliant | 18,000 | ||
| K4S281632KUI75 | Samsung Electronics Co. Ltd | 128MBIT K-DIE SYNCHRONOUS DRAM Synchronous DRAM, 8MX16, 5.4ns, CMOS, PDSO54 RoHS : Compliant | 13,510 | |||
| BCP6816 | Infineon Technologies AG | NPN SILICON AF TRANSISTOR Power Bipolar Transistor, 1A I(C), 1-Element, NPN, Silicon, Plastic/Epoxy, 4 Pin RoHS : Not Compliant | 3,900 | |||
| 4816P1101LF | Bourns Inc | THICK FILM SURFACE MOUNTED MEDIUM BODY RESISTOR Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1.28W, 100ohm, 50V, 2% +/-Tol, 100ppm/Cel, Surface Mount, 2244 RoHS : Compliant | 3,580 | |||
| IS61LV12816L10BI | Integrated Silicon Solution Inc | Standard SRAM, 128KX16, 10ns, CMOS, PBGA48 RoHS : Compliant | 1,277 | |||
| N80C19816 | Intel Corporation | CHMOS MICROCONTROLLER Microcontroller, 16-Bit, 8096 CPU, 16MHz, CMOS, PQCC52 RoHS : Not Compliant | 936 | |||
| 1N2816B | Microwave Semiconductor | SILICON ZENER DIODE Zener Diode, 18V V(Z), 5%, 50W, Silicon, Unidirectional, TO-3 RoHS : Not Compliant | 389 | |||
SERC816 | STMicroelectronics | SERCOS INTERFACE CONTROLLER Serial I/O Controller, 1 Channel(s), 2MBps, CMOS, PQFP100 RoHS : Compliant | 259 | |||
| RMLV0816BGBG4S2AC0 | Renesas Electronics Corporation | Static RAM, 8Mbit, Renesas, 3.3V, 44-pin TSOP-II RoHS : Compliant | 254 | |||
| KM681615 | Samsung Semiconductor | Standard SRAM, 2KX8, 150ns, CMOS, PDIP24 RoHS : Not Compliant | 148 | |||
| 1881613 | Phoenix Contact | Strip Terminal Block, 4A, 0.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 50 | |||
| MSM5118165F60J3 | OKI Electric Industry Co Ltd | DRAM, 16M x 16, 60ns, OKI RoHS : Not Compliant | 17 | |||
| XLS2816AP250 | Exel Microelectronics Inc | 2K X 8 EEPROM 5V EEPROM, 2KX8, 250ns, Parallel, NMOS, PDIP24 RoHS : Not Compliant | 13 | |||
| K4S281632OLC60 | Samsung Semiconductor | 128MB O-DIE SDRAM DDR DRAM, 8MX16, 5ns, CMOS, PDSO54 RoHS : Compliant | 10 | |||
| RMLV0816BGSB4S2AA0 | NEC Electronics Group | 8MBIT ADVANCED LPSRAM (512K WORD X 16BIT) Standard SRAM, 512KX16, 45ns, CMOS, PDSO44 RoHS : Not Compliant | 4 | |||
 GLYN GmbH & Co. KG | SDP816-500PA | Sensirion | Analog Differential Pressure Sensor -500...+500Pa RoHS : Compliant | 80 | ||
 PUI | 12.88166 | 16,400 | ||||
| 12.88168 | 8,055 | |||||
| 12.88816 | 7,880 | |||||
| 12.88162 | 4,000 | |||||
| 12.88169 | 2,000 | |||||
| 2011-1X04MTL-3.2-8-1.6T-P | 195 | |||||
| 881605 | 1 | |||||
| 1816-50F | 1 | |||||
 Richardson RFPD | 142-0901-816 | Cinch Connectivity Solutions | Conn SMA Adapter PL/PL 0Hz to 18GHz 50Ohm ST Gold RoHS : Compliant |
| 0 | |
| SI5345A-D08166-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| LT1816CMS8#PBF | Analog Devices Inc | Op Amp Dual High Speed Amplifier ±6.3V/12.6V Autom RoHS : Compliant |
| 0 | ||
| R142078161 | Radiall | Conn BNC PL 0Hz to 1.5GHz 75Ohm Crimp ST Cable Mou RoHS : Compliant |
| 0 | ||
| TEBWPC181610 | PolyPhaser | INTERCONNECT ACCESRY RoHS : Compliant |
| 0 | ||
| TEF181608-000DR | PolyPhaser | 18x16x08 Fiberglass Polyester FRP Weatherproof Out RoHS : Compliant |
| 0 | ||
| TEF181608-10FS-UL | PolyPhaser | 18x16x08 UL Listed Fiberglass Polyester FRP Weathe RoHS : Not Compliant |
| 0 | ||
| SI5341A-D12816-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| 142-5701-816 | Cinch Connectivity Solutions | Conn SMA RCP 0Hz to 18GHz 50Ohm Solder ST Edge Mou RoHS : Compliant | 0 | |||
| SI5350AB14816-GM1 | Skyworks Solutions Inc | Web Customizable Any Frequency CMOS CLOCK GENERATO RoHS : Compliant | 0 | |||
| LTC3816IUHF#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 550kHz 38-Pin Q RoHS : Compliant |
| 0 | ||
| CD610816C | Powerex Power Semiconductors | Rectifier Diode 800V 160A 3-Pin RoHS : Compliant | 0 | |||
ADN2816ACPZ-RL7 | Analog Devices Inc | CDR SONET 3.3V 32-Pin LFCSP EP T/R RoHS : Compliant | 0 | |||
| R413816650 | Radiall | Fixed Coax Attenuatr RoHS : Compliant | 0 | |||
| HSDSJZSPZ18-16 | Amphenol Corporation | Cable Assembly Coaxial 10m HSD Connector to HSD Co RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | B39311B48162910 | INSTOCK | 129,000 | |||
| 232270481603- | INSTOCK | 9,919 | ||||
IS65WV12816BLL-55BLA3 | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 7,388 | |||
| IS65WV12816BLL-55BLA3 | INSTOCK | 1,888 | ||||
| NS681680 | INSTOCK | 1,721 | ||||
| 098816-1010 | INSTOCK | 1,457 | ||||
| 1AB128160015 | INSTOCK | 900 | ||||
| IS61LV12816-10T | INSTOCK | 814 | ||||
| 4816P-T01-103LF | Bourns Inc | INSTOCK RoHS : Compliant | 629 | |||
| RR0816P-1401-D-15H | INSTOCK | 350 | ||||
| 206-8-16R-10% | INSTOCK | 100 | ||||
| K4S281632D-T175 | Samsung Electro-Mechanics | INSTOCK | 100 | |||
| RR0816P-331-D | Susumu Co Ltd | INSTOCK RoHS : Compliant | 69 | |||
| 222081650 | INSTOCK | 13 | ||||
IS61LV12816L-10T | Integrated Silicon Solution Inc | INSTOCK RoHS : Not Compliant | 1 | |||
 Avnet Asia | NCV8160AMX330TBG | onsemi | (Alt: NCV8160AMX330TBG) RoHS : Compliant |
| 15,000 | |
| 5054481691 | Molex | (Alt: 5054481691) RoHS : Compliant | 220 | |||
| 0428160412 | Molex | Connector Housing, Receptacle, 4 Contacts, 1 Row, 10 mm, 42816 Series, Polyester, Mini-Fit Sr. (Alt: 0428160412) RoHS : Compliant | 141 | |||
| IS61WV204816BLL-10BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 32Mbit 2M X 16 10ns 48-Pin TFBGA (Alt: IS61WV204816BLL-10BLI) RoHS : Compliant | 0 | |||
| IS62WV12816FBLL-45TLI | Integrated Silicon Solution Inc | SRAM Chip 2M-bit 128k-bit x 16bit 45ns 44-Pin TSOP-II (Alt: IS62WV12816FBLL-45TLI) RoHS : Compliant |
| 0 | ||
| KSM56T46BS8-16MH | Kingston Technology Company | (Alt: KSM56T46BS8-16MH) RoHS : Compliant | 0 | |||
| 0877600816 | Molex | (Alt: 0877600816) RoHS : Compliant | 0 | |||
ZXMC10A816N8TC | Diodes Incorporated | Dual MOSFET, Complementary N and P Channel, 100 V, 100 V, 2.1 A, 2.1 A, 0.17 ohm (Alt: ZXMC10A816N8TC) RoHS : Compliant | 0 | |||
| Q22FA2380081600 | Epson Electronics America Inc | Crystal 18MHz 16pF 4-Pin SMD T/R (Alt: Q22FA2380081600) RoHS : Compliant | 0 | |||
| IS62WV12816FBLL-45BLI | Integrated Silicon Solution Inc | SRAM Chip 2M-bit 128k-bit x 16bit 45ns 48-Pin VFBGA (Alt: IS62WV12816FBLL-45BLI) RoHS : Compliant | 0 | |||
| NCV8163AMX280TBG | onsemi | (Alt: NCV8163AMX280TBG) RoHS : Compliant | 0 | |||
| BC816-16HR | Nexperia | (Alt: BC816-16HR) RoHS : Compliant | 0 | |||
| HMC74-A816 | Amphenol Corporation | (Alt: HMC74-A816) RoHS : Compliant | 0 | |||
| 10178161-C7A304 | Amphenol Corporation | HPR NEMA 4500 MM (Alt: 10178161-C7A304) RoHS : Compliant | 0 | |||
| 10178161-C7A303 | Amphenol Corporation | META HPR NEMA 3800MM POWER WHIP (Alt: 10178161-C7A303) RoHS : Compliant | 0 | |||
 Avnet Silica | STM1816SWX7F | STMicroelectronics | Processor Supervisor 288V 3V33V5V 3Pin SOT23 TR (Alt: STM1816SWX7F) RoHS : Compliant | 285,000 | ||
| NCV8163ASN180T1G | onsemi | LDO Regulator 250 mA UltraLow Dropout UltraLow Iq UltraHigh PSRR UltraLow Noise 18 V Active Discharge TSOP5 ONSSPCLDO (Alt: NCV8163ASN180T1G) RoHS : Compliant | 27,000 | |||
| NCV8160AMX180TBG | onsemi | LDO Regulator 250 mA UltraLow Dropout Low Iq UltraHigh PSRR UltraLow Noise 18 V 250 mA (Alt: NCV8160AMX180TBG) RoHS : Compliant | 10,000 | |||
ATMEGA128-16AUR | Microchip Technology Inc | MCU 8bit ATmega AVR RISC 128KB Flash 5V 64Pin TQFP TR (Alt: ATMEGA128-16AUR) RoHS : Compliant | 5,000 | |||
| STM1816TWX7F | STMicroelectronics | Voltage Supervisor ActiveLow OpenDrain 1 V to 55 V 150 ms 306 V 3 Pins SOT23 (Alt: STM1816TWX7F) RoHS : Compliant | 3,000 | |||
| AP22816BKAWT-7 | Diodes Incorporated | Power Load Distribution Switch IC High Side 1 Channel 55 V 11 A 95 MilliOhms 5 Pins TSOT25 (Alt: AP22816BKAWT-7) RoHS : Compliant | 3,000 | |||
| AP22816BKEWT-7 | Diodes Incorporated | USB Power DistributionHigh Side Switch Single 27V to 55V 1A 5Pin TSOT25 TR (Alt: AP22816BKEWT-7) RoHS : Compliant | 3,000 | |||
| AP22816BKBWT-7 | Diodes Incorporated | (Alt: AP22816BKBWT-7) RoHS : Compliant | 3,000 | |||
| IPS8160HQ | STMicroelectronics | MOTION CONTROL AUTOMATION (Alt: IPS8160HQ) RoHS : Compliant | 2,500 | |||
| SERC816 | STMicroelectronics | SERCOS Interface Controller 100Pin PQFP Tray (Alt: SERC816) RoHS : Compliant | 726 | |||
| SERC816/TR | STMicroelectronics | SERCOS Interface Controller 100Pin PQFP Tray (Alt: SERC816/TR) RoHS : Compliant | 500 | |||
| ATMEGA128-16AU | Microchip Technology Inc | 8 Bit MCU AVR ATmega Family ATmega128 Series Microcontrollers AVR 16 MHz 128 KB 64 Pins (Alt: ATMEGA128-16AU) RoHS : Compliant | 360 | |||
ATMEGA8-16AU | Microchip Technology Inc | 8 Bit MCU AVR ATmega Family ATmega8 Series Microcontrollers AVR 16 MHz 8 KB 32 Pins TQFP (Alt: ATMEGA8-16AU) RoHS : Compliant | 250 | |||
TYN816RG | STMicroelectronics | (Alt: TYN816RG) RoHS : Compliant | 150 | |||
| IS61WV12816DBLL-10TLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 2MBit 128K x 16 10ns 44Pin TSOPII (Alt: IS61WV12816DBLL-10TLI) RoHS : Compliant | 135 | |||
 Braemac Americas-Symmetry | ABM8-166-114.285MHZ-T | Abracon Corporation | CRYSTAL 114.285MHZ 18PF SMD RoHS : Compliant |
| 0 | |
AB308-16.000MHZ | Abracon Corporation | CRYSTAL 16.0000MHZ 16PF T/H RoHS : Compliant |
| 0 | ||
ABM8-16.000MHZ-9-B1U-T | Abracon Corporation | CRYSTAL 16.0000MHZ 9PF SMD RoHS : Compliant |
| 0 | ||
| ABM8-16.000MHZ-B2-T | Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| EA2532QA08-16.000M TR | Abracon Corporation | CRYSTAL, SMD, 2.5x3.2, 15/20, 8pF, 16.000MHz, -40+85C |
| 0 | ||
| E1SJA18-16.000M TR | Abracon Corporation | Crystals 16.000MHz 15ppm 18pF Parallel Resonant -40 C to +85 C |
| 0 | ||
| ABM8-16.000MHZ-12-K1-T | Abracon Corporation | CRYSTAL 16.000MHZ 12PF SMD RoHS : Compliant |
| 0 | ||
| E1SHA18-16.000M TR | Abracon Corporation | Crystals 16.000MHz 15ppm 18pF Parallel Resonant -20 C to +70 C |
| 0 | ||
| ABM8-16.000MHZ-D4Y-T | Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| ABM8-16.000MHZ-B2-T3 | Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| EA2532QA18-16.000M TR | Abracon Corporation | CRYSTAL, SMD, 2.5x3.2, 15/20, 18pF, 16.000MHz, -40+85C |
| 0 | ||
| ABM8-16.384MHZ-10-1-U-T | Abracon Corporation | CRYSTAL 16.3840MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| MA816.A.LBC.003 | Taoglas Antenna Solutions | Colosseum 3in1 Screw Mount 1M RG-174 GNSS-SMA(M): LTE -SMA(M): WiFi - RP-SMA(M) |
| 0 | ||
| ABM8-16.384MHZ-D2Y-T | Abracon Corporation | CRYSTAL 16.3840MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| EB3250AYA08-16.000M TR | Abracon Corporation | CRYSTAL, SMD, AUTOMOTIVE AEC-Q200, 5.0x3.2, 2 PAD, 30/50, 8pF, 16.000MHz, -40+125C |
| 0 | ||
 Pasternack Enterprises US | PE3C5881-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Male to SMA Female Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA female low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA female low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and female on end 2. This N type to SMA cable is a male to female coax assembly, PE3C5881-60, can also be known as a low PIM type N plug to SMA jack cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA jack cable assembly PE3C5881-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5881-60 can also be used in the other direction and will be SMA female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA female low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | |
| PE3W08816 | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Plug to D-Sub Receptacle Right Angle Cable Using LMR-195 Coax. PE3W08816 is a D-Sub plug to D-Sub receptacle right angle cable using LMR-195 coax. This Pasternack D-Sub plug to D-Sub receptacle right angle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. D-Sub to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug D-Sub to receptacle D-Sub right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08816 D-Sub plug to D-Sub receptacle right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18167 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMB Plug to BNC Male Right Angle Cable Using RG188-DS Coax. PE3W18167 is a SMB plug to BNC male right angle cable using RG188-DS coax. This Pasternack SMB plug to BNC male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. SMB to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18167 SMB plug to BNC male right angle cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3816/HS/PH90-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male Right Angle to BNC Male Right Angle Cable Using RG223 Coax with HeatShrink and 90 Deg. Clock in 200CM., Radio frequency assembly BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 200CM, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816/HS/PH90-200CM, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816/HS/PH90-200CM is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 200CM. |
| 0 | ||
| PE3816/HS/PH90-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male Right Angle to BNC Male Right Angle Cable Using RG223 Coax with HeatShrink and 90 Deg. Clock in 24 Inch., Radio frequency assembly BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 24 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 24 inch, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816/HS/PH90-24, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816/HS/PH90-24 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable using RG223 coax with heatshrink and 90 deg. clock in 24 inch. |
| 0 | ||
| PE38162-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to QMA Female Bulkhead Cable 48 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to QMA female bulkhead cable 48 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to QMA female bulkhead cable 48 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and QMA bulkhead cable connection on the other. Our SMA to QMA cable assembly has male gender on end 1 and female on end 2. PE38162-48 can also be known as a SMA plug to QMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to QMA jack cable assembly PE38162-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE38162-48 RF cable are available on our downloadable PDF datasheet.PE38162-48 can also be used in the other direction and will be QMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to QMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3816LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male Right Angle to BNC Male Right Angle Cable 60 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly BNC male right angle to BNC male right angle cable 60 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 60 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816LF-60, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816LF-60 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 60 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE3C8816/BK-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BK, RF Cable Type: Belden 1694A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-BK Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BK coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BK-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BK-300 is built with Belden 1694A-BK which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BK coax. |
| 0 | ||
| PE3C8816/OR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-OR, RF Cable Type: Belden 1694A-OR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-OR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/OR-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/OR-120 is built with Belden 1694A-OR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-OR coax. |
| 0 | ||
| PE3C8816/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3W07481-60 | Pasternack Enterprises |
| 0 | |||
| PE3C8816/BK-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BK, RF Cable Type: Belden 1694A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BK Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BK-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BK-12 is built with Belden 1694A-BK which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BK coax. |
| 0 | ||
| PE3W08160-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Female Bulkhead to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N female bulkhead to N male right angle low loss cable 180 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N male right angle low loss cable 180 inch length using LMR-600-DB coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a female gender on end 1 and male on end 2. PE3W08160-180 can also be known as a low loss type N jack to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N jack to type N plug cable assembly PE3W08160-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N female bulkhead to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08160-180 can also be used in the other direction and will be right angle type N male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N male right angle low loss cable 180 inch length using LMR-600-DB coax. |
| 0 | ||
| PE3W18169 | Pasternack Enterprises | Key Specifications, Connector Series 1: Double Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. Double Banana Plug to Reverse Polarity SMA Male Right Angle Cable Using PE-C195 Coax. PE3W18169 is a Double Banana plug to reverse polarity SMA male right angle cable using PE-C195 coax. This Pasternack Double Banana plug to reverse polarity SMA male right angle cable assembly uses a 50 Ohm Double Banana for connector 1 and a 50 Ohm SMA for connector 2. Double Banana to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug Double Banana to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18169 Double Banana plug to SMA reverse polarity male right angle cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3816LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male Right Angle to BNC Male Right Angle Cable 48 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3816LF-48, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3816LF-48 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 48 inch length using RG223 coax, RoHS. |
| 0 | ||
 Teledyne HiRel | 5962-9581601QXA | Teledyne HiRel | TRANSCEIVER/REGISTER, 16-BIT, WITH 3-STATE INPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
 Venkel Ltd. | UPTF0402-16W-N-8160DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;816R;�0.5% RoHS : Compliant | 0 | ||
| UPTF0603-16W-N-8162AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;81.6K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-8160AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;816R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-8161AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;8.16K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-8161BT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;8.16K;�0.1% RoHS : Compliant | 0 | |||
| UPTF2512-2W-E-8161AT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�25PPM;8.16K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-8160UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;816R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-8160CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;816R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-8161DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;8.16K;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-8161AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;8.16K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-N-8163BT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;10PPM;816K ;�0.1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-8161BT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;8.16K;�0.1% RoHS : Compliant | 0 | |||
| UPTF2010-2W-E-8161AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�25PPM;8.16K;�0.05% RoHS : Compliant | 0 | |||
| UPTF2512-2W-N-8160DT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;816R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-8161BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;8.16K;�0.1% RoHS : Compliant | 0 | |||
 Win Source Electronics | MAX6816EUS | Maxim Integrated Products | IC SWITCH DEBOUNCER SOT23-4 RoHS : Not Compliant |
| 50,000 | |
| ZXMC10A816N8TC | Diodes Incorporated | MOSFET N/P-CH 100V 2A 8-SOIC RoHS : Compliant |
| 29,545 | ||
| ATMEGA8-16AU | Microchip Technology Inc | IC MCU 8BIT 8KB FLASH 32TQFP RoHS : Compliant |
| 27,500 | ||
| IS62WV12816BLL-55BLI-TR | Integrated Silicon Solution Inc | IC SRAM 2MBIT 55NS 48MINIBGA |
| 25,390 | ||
| MC33816AER2 | Nexperia | PROGRAMMABLE SOLENOID CONTROLLER / Solenoid Controller PMIC 64-HLQFP (10x10) |
| 9,000 | ||
ADS8166IRHBT | Texas Instruments | RoHS : Compliant |
| 8,310 | ||
| K4S281632F-TC75 | Samsung Electronics Co. Ltd | 128Mb F-die SDRAM Specification |
| 7,988 | ||
DP83816AVNG/NOPB | Texas Instruments | IC MEDIA ACCESS CTRLR 144-LQFP RoHS : Compliant |
| 7,200 | ||
| IS61WV204816BLL-10BLI | Integrated Silicon Solution Inc | IC SRAM 32MBIT PARALLEL 48TFBGA RoHS : Compliant |
| 3,000 | ||
| SI4816BDY-T1-E3 | Vishay Huntington | MOSFET 2N-CH 30V 5.8A 8-SOIC |
| 3,000 | ||
ATMEGA8-16MUR | Microchip Technology Inc | IC MCU 8BIT 8KB FLASH 32VQFN / AVR AVR® ATmega Microcontroller IC 8-Bit 16MHz 8KB (4K x 16) FLASH 32-VQFN (5x5) RoHS : Compliant |
| 2,600 | ||
| 4816P-2-103LF | Bourns Inc | RES ARRAY 15 RES 10K OHM 16SOIC RoHS : Compliant |
| 1,028 | ||
| ADN2816ACPZ-RL7 | Analog Devices Inc | IC CLK/DATA REC 675MBPS 32-LFCSP RoHS : Compliant |
| 978 | ||
TMS320DM8167SCYG | Texas Instruments | TMS320DM816x DaVinci Video Processors | IC DGTL MEDIA PROCESSR 1031FCBGA RoHS : Compliant |
| 620 | ||
| STM1816SWX7F | STMicroelectronics | IC MPU RESET CIRCUIT 2.88V SOT23 RoHS : Compliant |
| 204 | ||
 Wuhan P&S | NCV8161AMX300TBG | onsemi | XDFN4 AD 3.0V LDO 450 MA, RoHS : Compliant |
| 10,000 | |
| NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant |
| 2,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand