| Electronic Components Datasheet Search |
|
836110012 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 316836-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip - Tape and Reel (Alt: 316836-1) RoHS : Compliant |
| 96,000 | |
| 83612-9020 | Molex | D-Sub Connector, Plug, 15 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83612 Series - Rail/Tube (Alt: 0836129020) RoHS : Compliant |
| 2,097 | ||
| 83611-9006 | Molex | Conn Micro D Subminiature Plug 9 POS 1.27mm Solder RA Through Hole Tube - Rail/Tube (Alt: 0836119006) RoHS : Compliant |
| 1,407 | ||
| 83614-9014 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83614 Series - Rail/Tube (Alt: 0836149014) RoHS : Compliant |
| 1,320 | ||
| 83614-9012 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83614 Series - Rail/Tube (Alt: 0836149012) RoHS : Compliant |
| 757 | ||
| 83614-9016 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Straight, 83614 Series - Rail/Tube (Alt: 0836149016) RoHS : Compliant |
| 204 | ||
| 8-36161-0 | TE Connectivity | TERMINAL,PIDG R 12-10 10 - Bulk (Alt: 8-36161-0) RoHS : Not Compliant |
| 0 | ||
| 83614-9018 | Molex | - Rail/Tube (Alt: 0836149018) RoHS : Compliant | 0 | |||
| 538361-1 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 538361-1) RoHS : Not Compliant | 0 | |||
| 46708-3612 | Molex | EXTreme Ten60 TPA WTB Pwr/Sig Mix 6P-12S - Bulk (Alt: 0467083612) RoHS : Compliant |
| 0 | ||
| 7-2836133-7 | TE Connectivity | - Bag (Alt: 7-2836133-7) RoHS : Not Compliant | 0 | |||
| 7-2836138-2 | TE Connectivity | - Bulk (Alt: 7-2836138-2) RoHS : Not Compliant | 0 | |||
| 418-3610-1300A-10 | Amphenol Corporation | - Bulk (Alt: 41836101300A10) RoHS : Not Compliant | 0 | |||
| 418-3610-1500E-03 | Amphenol Corporation | - Bulk (Alt: 41836101500E03) RoHS : Not Compliant | 0 | |||
| 418-3610-1700A-03 | Amphenol Corporation | - Bulk (Alt: 41836101700A03) RoHS : Not Compliant | 0 | |||
![]() Newark | L000836-10 | TE Connectivity | Fpc Antenna, 4.4 To 5Ghz, 3.63Dbi, 10W; |Te Connectivity L000836-10 RoHS : Compliant |
| 2,000 | |
| LT8361IMSE#PBF | Analog Devices Inc | Dc/Dc Conv, Boost, Inv, 2Mhz, 125Deg C; |Analog Devices, Inc. LT8361IMSE#PBF RoHS : Compliant |
| 333 | ||
| 1836189 | Phoenix Contact | Terminal Block, Header, 2Pos, Th; |Phoenix Contact 1836189 RoHS : Compliant |
| 225 | ||
| 58361-1/2 | Thomas & Betts | Steel Utility Box; |Abb Thomas & Betts 58361-1/2 RoHS : Not Compliant |
| 178 | ||
| C-SD483610LG | nVent Hoffman | Wall-Mount Type 4 12 Enclosure; |Nvent Hoffman C-SD483610LG RoHS : Compliant |
| 49 | ||
| EN4SD483612GY | Hammond Manufacturing | Metal Enclosure, Eclipse, Single Door; |Hammond EN4SD483612GY RoHS : Compliant |
| 24 | ||
| 7TCA083610R0013 | ABB Low Voltage Products and Systems | 25X3 Copper Square Clamp (Un-Named); |Abb 7TCA083610R0013 RoHS : Compliant |
| 19 | ||
| C3R483616SC | Hammond Manufacturing | Metal Enclosure, Junction Box; |Hammond C3R483616SC RoHS : Compliant |
| 8 | ||
| EN4SD483612S16R | Hammond Manufacturing | Metal Enclosure, A Latch, Wall Mnt; |Hammond EN4SD483612S16R RoHS : Compliant |
| 8 | ||
| HWST483616S16 | Hammond Manufacturing | Metal Enclosure, Sloped; |Hammond HWST483616S16 RoHS : Compliant |
| 4 | ||
| CSD483616 | nVent Hoffman | Metal Enclosure, Electrical/Industrial; |Nvent Hoffman CSD483616 RoHS : Compliant |
| 3 | ||
| L836-121T-KD | Bel Fuse | Rj45 Conn, Jack, 8P8C, 1Port, R/A, Th; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:-; Ip Rating:-; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
| 8361 | Abbatron | Standoff; |Abbatron Hh Smith 8361 RoHS : Not Compliant |
| 0 | ||
| 8361 | Visual Communications Company | Incandescent Lamp, 28V, Wire Leaded; |Vcc/visual Communications Company 8361 RoHS : Compliant |
| 0 | ||
| 8361 | O-Z Gedney | 4 In Sq Cvr Sgl Toggle; |Oz Gedney 8361 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX98361BEWL+T | Analog Devices Inc | Tiny, Cost-Effective, Plug-and RoHS : Compliant |
| 90,500 | |
| MAX98361BEWL+ | Analog Devices Inc | Tiny, Cost-Effective, Plug-and RoHS : Compliant | 4,642 | |||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | minSO DC-2.5GHz True Pwr Detec RoHS : Compliant |
| 3,834 | ||
AD8361ARMZ-REEL![]() | Analog Devices Inc | minSO DC-2.5GHz True Pwr Detec RoHS : Compliant |
| 3,108 | ||
| MAX98361DEWL+ | Analog Devices Inc | Tiny, Cost-Effective, Plug-and RoHS : Compliant | 2,265 | |||
AD8361ARTZ-RL7![]() | Analog Devices Inc | SOT23 DC-2.5GHz True Pwr Detec RoHS : Compliant |
| 2,184 | ||
| LT8361EMSE#TRPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 498 | ||
| LT8361HMSE#TRPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 354 | ||
| LT8361IMSE#PBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 122 | ||
| AD8361-EVALZ | Analog Devices Inc | AD8361 Evaluation Board RoHS : Compliant |
| 10 | ||
| LT8361IMSE#TRPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 0 | ||
| LT8361HMSE#WPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 0 | ||
| MAX98361AEWL+T | Analog Devices Inc | Tiny, Cost-Effective, Plug-and RoHS : Compliant |
| 0 | ||
| LT8361IMSE#WTRPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 0 | ||
| LT8361EMSE#WTRPBF | Analog Devices Inc | 60Vin, 100V/2A uPowerBoost/SEP RoHS : Compliant |
| 0 | ||
![]() RS | 1083611 | Phoenix Contact | D-PTTBV 2,5/4 RoHS : Compliant |
| 200 | |
| AP836 100R J | Arcol | 35 WATTS TO-220 THICK FILM100 OHMS 5%100PPM |
| 98 | ||
| 58361 1/2 | Steel City | ONE GANG UTILITY BOX,4"L X 2-1/8"W X 1-7/8"D,1/2"KNOCKOUTS, GALVANIZED STEEL |
| 42 | ||
| 2628361 | RS Pro | BLACK SINGLE-PORT RJ45 CAT5E FEED-THRU 2.5MM HOLE FEMALE CONNECTOR (TRAY OF 25) |
| 14 | ||
| 5418361 | RS Pro | DC AXIAL FAN, 120X120X38.5MM, 178.5M3/H,6W, 12 VDC (OD1238 SERIES) |
| 12 | ||
| 8361 | ELESA USA | CT.476/30 P-M6X10, WING KNOBS, ZINC-PLATED STEEL THREADED STUD |
| 10 | ||
| 24568-361 | nVent Schroff | GUIDE RAIL |
| 10 | ||
| LAT-18-361-1 (B-361) | Brady Worldwide Inc | SELF-LAMINATING LABELS, POLYESTER, MATTE FINISH, 1.33"H X 1" W, CLEAR/WHITE |
| 4 | ||
| 2483619 | RS Pro | HOOK-UP WIRE, BLACK SILICONE RUBBER STRANDED 20AWG, 0.5MM2 16 0.2MM 82FT (25M) |
| 2 | ||
| EN4SD483612GY | Hammond Manufacturing | ENCLOSURE, WALLMOUNT, NEMA 4, QUARTER TURN, HINGE, HANDLE, STEEL, 48X36X12 |
| 1 | ||
| 108361A (108361A CX100) | Amphenol Lutze | MULT-CONDUCTOR CONTROL CABLE, 18 AWG, 12 CONDUCTOR, PVC, GREY, 600V, UNSHIELDED |
| 1 | ||
| BKWM 14-836-10 (U0969-31) | TURCK Inc | BKWM 14-836-10, U0969-31 |
| 1 | ||
| 8361 | Littelfuse Inc | NUT FACE 5/8-32 |
| 0 | ||
| 8361 | Burkert Fluid Control Systems | CABLE PLUG, 2508-01-B-00-3-1-BBJ |
| 0 | ||
| 8361 | HH Smith | STANDOFF; ROUND; ALUMINUM; 8-32 THREAD; 1/4" OD; 1/4" LENGTH; FULL THREAD |
| 0 | ||
![]() Microchip Technology Inc | AT28C256-15UM/883-610![]() | Microchip Technology Inc | 150NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 - Contact for Pricing RoHS : Compliant | 0 | ||
![]() Bisco Industries | MS51836-101 | Groov-Pin Corporation | 4,435 | |||
| 58361 1/2 | Thomas & Betts | 233 | ||||
| 5808-36-15 | Seastrom Mfg | 111 | ||||
| 1836-14-B-SS-S-12 | Accurate Screw Machine | 75 | ||||
| 8-36160-1 | TE Connectivity | RoHS : Compliant | 60 | |||
| 8-36152-1 | TE Connectivity | RoHS : Compliant | 51 | |||
| M0836-12-N | RAF Electronic Hardware | 50 | ||||
| 8-36149-1 | TE Connectivity | RoHS : Compliant | 47 | |||
| 26836-1 | Hutchinson Aerospace & Industry | 45 | ||||
| MS35308-361 | MS HEX CAP SCREWS | 31 | ||||
| 108361-0001 | NUTS | 30 | ||||
| M39029/58-361 | Amphenol Aerospace | 28 | ||||
| 1836-16SS-12 | Accurate Screw Machine | 20 | ||||
| 13480836-15 | SOCKET SCREWS | 10 | ||||
| 13480836-12 | SOCKET SCREWS | 5 | ||||
![]() Rochester Electronics | TEA18361LT/1J | NXP Semiconductors | Power Supply Power Supply Controller 14-SOIC T/R RoHS : Compliant |
| 17,500 | |
AD8361ARTZ-RL7![]() | Analog Devices Inc | RF Detectors Cellular, CDMA, W-CDMA SOT-23-6 T/R RoHS : Compliant |
| 1 | ||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | RF Detectors Cellular, CDMA, W-CDMA 8-SOP T/R RoHS : Compliant |
| 12 | ||
AD8361ART-REEL![]() | Analog Devices Inc | Analog Circuit, 1 Func, BIPolar, PDSO6 RoHS : Not Compliant |
| 92,061 | ||
AD8361ART-REEL7![]() | Analog Devices Inc | Analog Circuit, 1 Func, BIPolar, PDSO6 RoHS : Not Compliant |
| 11,593 | ||
ADS8361IRHBT![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 32-QFN T/R RoHS : Compliant |
| 164 | ||
ADS8361IDBQG4![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 24-SOP Tube RoHS : Compliant |
| 3 | ||
ADS8361IDBQ![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 24-SOP Tube RoHS : Compliant |
| 18 | ||
![]() Sager | 8361 | Keystone Electronics Corp | Terminals 18 AWG BLUE 10A 2 WIRES | 0 | ||
| 8-36161-0 | TE Connectivity | TERMINAL,PIDG R 12-10 10 RoHS : Compliant |
| 0 | ||
| 1083613 | Phoenix Contact | DIN Rail Terminal Blocks D-PTV 2,5/4-TWIN-MT RoHS : Compliant |
| 0 | ||
| 538361-1 | TE Connectivity | TE Connectivity SCANNER STD | 0 | |||
| 7-2836133-7 | TE Connectivity | Crimpers / Crimping Tools OC-066F090OV-752-CRI MPTOOLINGKIT | 0 | |||
| 7-2836138-2 | TE Connectivity | TE Connectivity OCEAN_2.0_Applicator-S-055F108OV | 0 | |||
| 2836127-2 | TE Connectivity | Bench Top Tools OCEAN-2.0-APPLICATOR-S-117F197O | 0 | |||
| 2836155-1 | TE Connectivity | Bench Top Tools OCEAN 2.0 APPLICATOR -S-062F072O | 0 | |||
| 7-2836137-7 | TE Connectivity | Crimpers / Crimping Tools OC-069F185O-CRIMPTOO LINGKIT | 0 | |||
| 7-2836187-2 | TE Connectivity | TE Connectivity OCEAN_2.0_APPLICATOR-S-080F160OA | 0 | |||
| 1836189 | Phoenix Contact | Pluggable Terminal Blocks 2 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 0 | ||
| 0558361202 | Molex | I/O Connectors | 0 | |||
| AP105-DF63-1618-3(61) | Hirose Electric Co Ltd | Bench Top Tools | 0 | |||
| 0836129203 | Molex | D-Sub Micro-D Connectors COMM MICRO-D 15 POS JKPOST NOT INSTALLED RoHS : Compliant |
| 0 | ||
| 0836131417 | Molex | Molex | 0 | |||
![]() Coilcraft Direct | XGL4018-361MEC | Coilcraft Inc | Power Inductor, molded, composite, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 4,780 | |
![]() TME | 20836 16 000 1000 | RECA | Screw; M6; M6x16; Head: cheese head; hex key; HEX 5mm; steel; none |
| 2,000 | |
| 1183613 | Bossard Group | Screw; 4x6; Head: cheese head; Pozidriv; PZ2; A2 stainless steel |
| 1,900 | ||
| 10-074836-14S | Amphenol Corporation | Connector: circular |
| 93 | ||
| 538361-1 | TE Connectivity | Tool: for crimping |
| 3 | ||
| 8361 | PROLINK | Cable; HDMI plug,both sides; HDMI 1.4,High Speed; 3m |
| 1 | ||
| 8361 | Elesa+Ganter | Knob wing; Ext.thread: M6; 10mm; H: 15mm; polyamide; W: 30mm |
| 0 | ||
| 00836 180000 100 | RECA | Screw; M6; M6x180; Head: cheese head; hex key; 5mm; steel; none |
| 0 | ||
| 02836 12 000 200 | RECA | Screw; M6; M6x12; Head: button; Phillips; PH3; A2 stainless steel |
| 0 | ||
| 12836 16 000 1000 | RECA | Screw; M6; M6x16; Head: button; Phillips; PH3; A4 stainless steel |
| 0 | ||
| 1836118 | Phoenix Contact | Connector: pluggable terminal block; plug; female; 8A; 160V; green RoHS : Compliant |
| 0 | ||
| 1836163 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 630V RoHS : Compliant |
| 0 | ||
| 20836 140000 200 | RECA | Screw; M6; M6x140; Head: cheese head; hex key; HEX 5mm; steel; none |
| 0 | ||
| 1836121 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 630V RoHS : Compliant |
| 0 | ||
| 20DAW8_3615S1.6 | GAPTEC Electronic GmbH & Co. KG | Converter: DC/DC; 20W; Uin: 9÷75VDC; Uout: 15VDC; Iout: 1334mA; THT |
| 0 | ||
| 8683610 | Gedore Torque Ltd | Interchangeable blade; 900mm; wood (hickory) |
| 0 | ||
![]() ComSIT USA | 836199003 | MOLEX INC | AVAILABLE EU | 248 | ||
| 836119023 | Molex | AVAILABLE EU RoHS : Compliant | 344 | |||
![]() ComSIT USA | 9278361 | TE Connectivity | Connector Accessory RoHS : Not Compliant | 7,500 | ||
| AD8361ARTZRL7 | Analog Devices Inc | LF TO 2.5 GIGA HZ POWER DETECTOR Analog Circuit, 1 Func, PDSO6 RoHS : Compliant | 3,315 | |||
| KP1836133135W | Vishay Intertechnologies | Cap Film 330pF 1600V PP 10% Radial Plastic Rectangular Can 100�C T/R RoHS : Compliant | 1,500 | |||
| MAL204836102E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount RoHS : Compliant | 500 | |||
AD8361ARMZ![]() | Analog Devices Inc | LF TO 2.5 GIGA HZ POWER DETECTOR Analog Circuit, 1 Func, PDSO8 RoHS : Compliant | 52 | |||
| 1AB08361AAAATBDAOAA | Alcatel-Lucent | Electronic Component RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | 8-36161-0 | TE Connectivity | TERMINAL,PIDG R 12-10 10 RoHS : Compliant | 0 | ||
| 927836-1 | TE Connectivity | HC STD-TIMER KONT RoHS : Compliant |
| 0 | ||
| 41836111700A10 | Amphenol PCD | RHINO | 0 | |||
| 41836112500A02 | Amphenol PCD | RHINO | 0 | |||
| 4183612210000 | Amphenol PCD | RHINO | 0 | |||
| 41836122500002 | Amphenol PCD | RHINO | 0 | |||
| 41836131300000 | Amphenol PCD | RHINO | 0 | |||
| 41836131300B02 | Amphenol PCD | RHINO | 0 | |||
| 4.18361025E+20 | Amphenol PCD | RHINO | 0 | |||
| 41836101300003 | Amphenol PCD | RHINO | 0 | |||
| 41836101500B03 | Amphenol PCD | RHINO | 0 | |||
| 41836101500D10 | Amphenol PCD | RHINO | 0 | |||
| 41836102300D02 | Amphenol PCD | RHINO | 0 | |||
| 41836111300A10 | Amphenol PCD | RHINO | 0 | |||
| 4183611170000 | Amphenol PCD | RHINO | 0 | |||
![]() PEI Genesis | GTC08-36-10PY-023-B30-LC | Amphenol Corporation |
| 0 | ||
| GTC08-36-10S-B30-LC | Amphenol Corporation |
| 0 | |||
| 836111617 | Ulti-Mate Connector Inc |
| 0 | |||
| ATM283-61 | Abbotec Incorporated | RoHS : Compliant |
| 0 | ||
| GTC08-36-10PW | Amphenol Corporation |
| 0 | |||
| GTC08-36-10PY-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-10PY-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-12S-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-17P-023-B30-LC | Amphenol Corporation |
| 0 | |||
| GTS08-36-10SX-023 | Amphenol Corporation |
| 0 | |||
| GTS08-36-10SY-023-116 | Amphenol Corporation |
| 0 | |||
| GTS08-36-11P-023 | Amphenol Corporation |
| 0 | |||
| GTC08-36-10S-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-36-10SZ | Amphenol Corporation |
| 0 | |||
| GTS08-36-11S-116 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 100836-1 | TE Connectivity | Connectors |
| 17,119 | |
| 61836-1 | TE Connectivity | Terminals RoHS : Compliant |
| 2,904 | ||
| ASP-198361-07 | Samtec Inc | Header / Socket Strip |
| 132 | ||
| GTC08-36-10S-023-LC | Amphenol Corporation | CONNECTOR |
| 112 | ||
| 10-074836-14S | Amphenol Corporation | Connector |
| 61 | ||
| 88-565836-11J | Amphenol Corporation | RECEPT |
| 24 | ||
| 88-565836-11I | Amphenol Corporation | RECEPT |
| 24 | ||
| 538361-5 | TE Connectivity | Connectors |
| 3 | ||
| 538361-1 | TE Connectivity | Tools |
| 2 | ||
| 91-565836-11G | Amphenol Corporation | RECEPT |
| 2 | ||
| HWST483616S16 | Hammond Manufacturing | N4X-316-48X36X16 SLOPE TOP |
| 1 | ||
| 538361-7 | TE Connectivity | Tools |
| 1 | ||
| 2836130-1 | TE Connectivity | OCEAN_2.0_APPLICATOR-S-055F080F |
| 1 | ||
| PJW483610L | Hammond Manufacturing | NON MET WALLMT 48X36X10.13 RoHS : Compliant |
| 1 | ||
| 91-542836-11E | Amphenol Corporation | RECEPT |
| 1 | ||
![]() Richardson RFPD | AD8361ARTZ-RL7![]() | Analog Devices Inc | RF Detector 2500MHz 6-Pin SOT-23 T/R RoHS : Compliant |
| 805 | |
| AP836 10R F | Ohmite Mfg Co | AP836 10R F RoHS : Compliant |
| 0 | ||
| LT8361IMSE#PBF | Analog Devices Inc | Conv DC-DC 2.8V to 60V Inverting/Step Up/SEPIC Sin RoHS : Compliant |
| 0 | ||
| LT8361IMSE#TRPBF | Analog Devices Inc | Conv DC-DC 2.8V to 60V Inverting/Step Up/SEPIC Sin RoHS : Compliant |
| 0 | ||
| AP836 1R F | Ohmite Mfg Co | AP836 1R F RoHS : Compliant |
| 0 | ||
| AP836 1K J | Ohmite Mfg Co | Res 1K Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 100R J | Ohmite Mfg Co | Res 100 Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 1K F | Ohmite Mfg Co | AP836 1K F RoHS : Compliant |
| 0 | ||
| LT8361EMSE#TRPBF | Analog Devices Inc | Conv DC-DC 2.8V to 60V Inverting/Step Up/SEPIC Sin RoHS : Compliant |
| 0 | ||
| SI5341D-D08361-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| 5188836-1 | TE Connectivity | Conn Hard Metric F 110 POS 2mm Press Fit RA Thru-H RoHS : Compliant |
| 0 | ||
| AD8361-EVALZ | Analog Devices Inc | AD8361 RF Detector Evaluation Board RoHS : Compliant |
| 0 | ||
| AP836 10K J | Ohmite Mfg Co | Res Thick Film 10K Ohm 5% 35W ±100ppm/C Molded TO- RoHS : Compliant |
| 0 | ||
| AP836 150R J | Ohmite Mfg Co | Res 150 Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 100R F | Ohmite Mfg Co | AP836 100R F RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 100836-1 | TE Connectivity | INSTOCK | 21,239 | ||
| KP1836-110/135 | Vishay Intertechnologies | INSTOCK | 15,280 | |||
| 7183-6154 | Yazaki Corp | INSTOCK | 6,240 | |||
| 316836-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,000 | |||
| 7183-6153 | INSTOCK | 3,641 | ||||
| KP1836-110/135 | ASIX Electronics Corporation | INSTOCK | 3,000 | |||
| 4782836104440 | TE Connectivity | INSTOCK | 2,840 | |||
AD8361ARM-REEL7![]() | Analog Devices Inc | INSTOCK RoHS : Not Compliant | 828 | |||
| 7283-6175-30 | Yazaki Corp | INSTOCK | 600 | |||
| LM8361 | INSTOCK | 120 | ||||
| 5003836-1 | INSTOCK | 14 | ||||
![]() Avnet Abacus | 836119006 | Molex | Conn Micro D Subminiature Plug 9 POS 127mm Solder RA Through Hole Tube (Alt: 836119006) RoHS : Compliant | 1,664 | ||
| KP1836147135 | Vishay Intertechnologies | KP 1836 470pF 10 1600V (Alt: KP1836147135) RoHS : Compliant | 1,500 | |||
| 836199010 | Molex | (Alt: 836199010) RoHS : Compliant | 220 | |||
| 1836189 | Phoenix Contact | Terminal Block Header 508 mm 2 Ways 8 A 320 V Through Hole Right Angle (Alt: 1836189) RoHS : Compliant | 0 | |||
| 927836-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 927836-1) RoHS : Compliant | 0 | |||
| 927836-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 927836-1) RoHS : Compliant | 0 | |||
| 583617-3 | TE Connectivity | (Alt: 583617-3) RoHS : Compliant | 0 | |||
| 877583616 | Molex | Conn Unshrouded Header HDR 36 POS 2mm Solder ST ThruHole Tray (Alt: 877583616) RoHS : Compliant | 0 | |||
| 836129022 | Molex | Conn Commercial MicroD PIN 15 POS 127mm Solder RA ThruHole 15 Terminal 1 Port Tube (Alt: 836129022) RoHS : Compliant | 0 | |||
| 836119204 | Molex | (Alt: 836119204) RoHS : Compliant | 0 | |||
| 459848361 | Molex | (Alt: 459848361) RoHS : Compliant | 0 | |||
| 6648361-1 | TE Connectivity | (Alt: 6648361-1) RoHS : Compliant | 0 | |||
| L000836-10 | TE Connectivity | FPC ANT VDP 200mm MHF4L 6175000MHz (Alt: L000836-10) RoHS : Compliant | 0 | |||
| KP1836122134W | Vishay Intertechnologies | KP 1836 220pF 5 1600V (Alt: 1836122134W) RoHS : Compliant | 0 | |||
| 116-83-610-41-006101 | PRECI-DIP SSA | Conn DIP Socket SKT 10 POS 254mm Solder ST ThruHole Box (Alt: 116-83-610-41-006101) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2523836-1 | TE Connectivity | TYPE-C-FEMALE_CONNECTOR_WITH LATCH (Alt: 2523836-1) RoHS : Compliant | 0 | ||
| 0836119006 | Molex | Conn Micro D Subminiature Plug 9 POS 1.27mm Solder RA Through Hole Tube (Alt: 0836119006) RoHS : Compliant | 0 | |||
| A836-1A1T-91B | Bel Fuse | (Alt: A836-1A1T-91B) RoHS : Compliant | 0 | |||
| 0836149014 | Molex | (Alt: 0836149014) RoHS : Compliant | 0 | |||
| MAL213836109E3 | Vishay Intertechnologies | Electrolytic Capacitor, 10 uF, 25 V, ? 20%, Axial Leaded, 1000 hours @ 105?C, Polar, Axial Leaded (Alt: MAL213836109E3) RoHS : Compliant | 0 | |||
| 2301836-1 | TE Connectivity | (Alt: 2301836-1) RoHS : Compliant | 0 | |||
| 0836119016 | Molex | D-Sub Connector, Plug, 9 Contacts, 1.27 mm, Gold, Panel Mount, Right Angle, 83611 Series (Alt: 0836119016) RoHS : Compliant | 0 | |||
| 0836119023 | Molex | D-Sub Connector, Plug, 9 Contacts, 1.27 mm, Gold, Panel Mount, Straight, 83611 Series, -40 to 125 ?C (Alt: 0836119023) RoHS : Compliant | 0 | |||
| 0836129020 | Molex | D-Sub Connector, Plug, 15 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83612 Series (Alt: 0836129020) RoHS : Compliant | 0 | |||
| 0836149016 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Straight, 83614 Series (Alt: 0836149016) RoHS : Compliant | 0 | |||
| 5188836-1 | TE Connectivity | Conn Daughter Card F 110 POS 2mm Press Fit RA Thru-Hole (Alt: 5188836-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BRKOUT-FXLN8361Q | NXP Semiconductors | Breakout Board for FXLN8361Q NXP Accelerometer (Alt: BRKOUT-FXLN8361Q) RoHS : Compliant | 0 | ||
IS61SP12836-166B![]() | Integrated Silicon Solution Inc | (Alt: IS61SP12836-166B) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | DV183612D230B | DEV-Dorsch Electronic Vertriebs GmbH | 10 | |||
![]() Component Electronics, Inc | 53836-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 750 | |
| 583617-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 200 | ||
| 62836-1 | TE Connectivity | IN STOCK SHIP TODAY | 200 | |||
| 83611-9006 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 77 | ||
| 1-583616-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| LAT-18-361-2.5 | Brady Worldwide Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 16 | ||
![]() DB Roberts | SOS-83.6-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | ||
| TN8-36-1024-1 | Essentra Components | StandoffThrd Fem/FemWht2-1/4 inSpc Standoff Thrd Fem/Fem White | 0 | |||
| TN8-36-1024-2 | Essentra Components | StandoffThrd Fem/MLWht2-1/4 inSpc Standoff Thrd Fem/ML White | 0 | |||
| SO-83.6-12ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOS-83.6-16 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOA-83.6-16 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOA-83.6-10 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| RP-348-361 | SHEREX FASTENING SO | 0 | ||||
| SOS-83.6-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| TN8-36-1024-3 | Essentra Components | StandoffThrd ML/MLWht2-1/4 inSpc Standoff Thrd ML/ML White | 0 | |||
| SOA-83.6-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOA-83.6-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOS-83.6-14 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| 1836-1032-A | RAF Electronic Hardware | 0 | ||||
| SO-83.6-14ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
![]() EBV Elektronik | TEA18361T/1J![]() | NXP Semiconductors | SMPS Controller IC 14Pin SOIC TR (Alt: TEA18361T/1J) RoHS : Compliant | 0 | ||
| SGM836-1.2XN6G/TR | SG Micro Corp | (Alt: SGM836-1.2XN6G/TR) RoHS : Compliant | 0 | |||
| SGM836-1.8XN6G/TR | SG Micro Corp | (Alt: SGM836-1.8XN6G/TR) RoHS : Compliant | 0 | |||
| SGM836-1.8XTDI6G/TR | SG Micro Corp | (Alt: SGM836-1.8XTDI6G/TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | UL12836133276 | Atlas Wire Corporation | Wire and Cable | 2,000 | ||
| UL12836133279 | Atlas Wire Corporation | Hook-Up Wire |
| 1,568 | ||
| M39029/58-361 | Amphenol Aerospace | Connector Acc | 207 | |||
| 592836-1 | TE Connectivity | Connector RoHS : Not Compliant | 49 | |||
| 500-1018-36 1 | Honda Tsushin Kogyo Co Ltd | Wire and Cable | 1 | |||
| 1E38-361PHA-NASA | Glenair Inc | Certs & Documen | 1 | |||
| 5188836-1 | TE Connectivity | Connector RoHS : Compliant |
| 0 | ||
| 758-36-101 | Winchester Interconnect | Connector |
| 0 | ||
| M85528/3-61 | Glenair Inc | Connector | 0 | |||
| M85528/3-6101 | Glenair Inc | Connector | 0 | |||
| 8-36152-1 | TE Connectivity | Terminals & Spl RoHS : Compliant | 0 | |||
![]() Maritex | 927836-1 | TE Connectivity | Rectangular Connector Contacts; 927836-1; TE CONNECTIVITY; Tin; Crimp; 17 AWG; 20 AWG RoHS : Compliant |
| 5,469 | |
| 316836-1 | TE Connectivity | Rectangular Connector Contacts; 316836-1; TE CONNECTIVITY; Tin; Crimp; 18 AWG; 22 AWG RoHS : Compliant |
| 1,550 | ||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | RF Detectors; AD8361ARMZ-REEL7; ANALOG DEVICES; 8; 1.1 mA; 1.1 mA; Surface Mount RoHS : Compliant |
| 5 | ||
![]() Master Electronics | 1836189 | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 320 V - nominal cross section: 1.5 mm² - number of positions: 2 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.4 mm RoHS : Compliant |
| 71 | |
| 8361 | JKL Components Corporation | T-1 3/4 Wire Lead Lamp RoHS : Compliant |
| 60 | ||
| 8-36161-0 | TE Connectivity | TERMINAL PIDG R 12-10 10 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 927836-1 | TE Connectivity | SPT REC 6.3 Contact SWS Sn RoHS : Compliant |
| 0 | ||
| UMYA18361 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 1083613 | Phoenix Contact | D-PTV 2 5/4-TWIN-MT RoHS : Compliant |
| 0 | ||
| 538361-1 | TE Connectivity | SCANNER STD RoHS : Not Compliant |
| 0 | ||
| 7-2836133-7 | TE Connectivity | OC-066F090OV-752-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 2836127-2 | TE Connectivity | OCEAN-2.0-APPLICATOR-S-117F197O RoHS : Not Compliant |
| 0 | ||
| 2836155-1 | TE Connectivity | OCEAN_2.0_Applicator-S-062F072O RoHS : Not Compliant |
| 0 | ||
| 7-2836137-7 | TE Connectivity | OC-069F185O-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 0836149012 | Molex | Conn Commercial Micro-D PIN 25 POS 1.27mm Solder RA Thru-Hole 25 Terminal 1 Port Tube RoHS : Compliant |
| 0 | ||
| 2836156-2 | TE Connectivity | OCEAN_2.0_APPLICATOR-S-055F072O RoHS : Not Compliant |
| 0 | ||
| L000836-10 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| ZW-03-13-T-S-836-197 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | AP836 1K F | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35 Watts TO-220 Thick Film100 Ohms 5%100PPM |
| 50 | |
| 83619-9011 | Molex | D-Sub Micro-D Connectors CMD RA DUAL STACK 25 K 25/30 CIR W/JKPOST RoHS : Compliant |
| 50 | ||
| AP836 150R J | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35W 150 Ohm TO-220 5% tol. |
| 50 | ||
| P8-361212A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-DB RoHS : Compliant |
| 50 | ||
| AP836 1R5 J | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35W 1.5 ohm 5% TO-220 NON INDUCTIVE |
| 50 | ||
| P8-361312A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-D RoHS : Compliant |
| 50 | ||
| 2583610000 | Weidmüller Interface GmbH & Co. KG | Grommets & Bushings CABTITE SE 2/5-6 SML BK RoHS : Compliant |
| 50 | ||
| FN3298-36-105-C25-R65 | TE Connectivity | Power Line Filters Three Phase (Wye) EMC/EMI Line Filter 36 A 50/60Hz Two Stage Terminal Block |
| 21 | ||
| P8-361211A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-DB RoHS : Compliant |
| 10 | ||
| 108361A | Amphenol Lutze | Mult-Conductor Control Cable, 18 AWG, 12 Conductor, PVC, Grey, 600V, Unshielded |
| 1 | ||
| AXG98361 | Axiom Manufacturing | AXIOM 50FT CAT6 SHIELDED CABLE - BLUE |
| 0 | ||
| 1836105 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5.08mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 08361841150 | Altech Corporation | Photoelectric Sensors Opto Sensor KORH120-M18MB63-DPS-V2-RT |
| 0 | ||
| 1836134 | Phoenix Contact | Pluggable Terminal Blocks 8 Pos 5.08mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 2908361 | Phoenix Contact | Industrial & Electrical Fuses FUSE 15A/32V FKS ATO RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W12836-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to 2.92mm Male Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and 2.92mm cable connection on the other. Our right angle SMP to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. PE3W12836-12 can also be known as a right angle SMP jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP jack to 2.92mm plug cable assembly PE3W12836-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12836-12 can also be used in the other direction and will be 2.92mm male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax. |
| 41 | |
| PE3C5836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C5836-12, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C5836-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5836-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 5 | ||
| PE3C5836-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Female to 7/16 DIN Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C5836-100CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C5836-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5836-100CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 5 | ||
| PE3W08361/HS/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Male Right Angle Cable Using RG405 Coax with HeatShrink and 180 Deg. Clock. PE3W08361/HS/PH180 is a Mini SMP female right angle to SMA male right angle cable using RG405 coax. This Pasternack Mini SMP female right angle to SMA male right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Mini SMP right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08361/HS/PH180 Mini SMP female right angle to SMA male right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W18361 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. HN Male Right Angle to N Male Right Angle Cable Using RG223 Coax. PE3W18361 is a HN male right angle to N male right angle cable using RG223 coax. This Pasternack HN male right angle to N male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18361 HN male right angle to N male right angle cable assembly is constructed with RG223 coax. | 0 | |||
| PE3C8361 | Pasternack Enterprises | 0 | ||||
| PE34836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female to SMA Female Cable 12 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA female to SMA female cable 12 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 12 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE34836-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE34836-12 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 12 inch length using PE-SR402AL coax. |
| 0 | ||
| PE3W08361 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Mini SMP Female Right Angle Cable Using RG405 Coax. PE3W08361 is a SMA male right angle to Mini SMP female right angle cable using RG405 coax. This Pasternack SMA male right angle to Mini SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Mini SMP for connector 2. SMA right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female Mini SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08361 SMA male right angle to Mini SMP female right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE34836-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female to SMA Female Cable 18 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA female to SMA female cable 18 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 18 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE34836-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE34836-18 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 18 inch length using PE-SR402AL coax. |
| 0 | ||
| PE3C7836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7836-12, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7836-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7836-12 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W08361/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Male Right Angle Cable Using RG405 Coax with HeatShrink. PE3W08361/HS is a Mini SMP female right angle to SMA male right angle cable using RG405 coax. This Pasternack Mini SMP female right angle to SMA male right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Mini SMP right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08361/HS Mini SMP female right angle to SMA male right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C4836-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Water Blue FAKRA Jack Right Angle to FAKRA Jack Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly water blue FAKRA jack right angle to FAKRA jack right angle cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Water blue FAKRA jack right angle to FAKRA jack right angle cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle FAKRA cable connection on one end and right angle FAKRA cable connection on the other. Our right angle FAKRA to right angle FAKRA cable assembly has jack gender on end 1 and jack on end 2. PE3C4836-12 can also be known as a right angle FAKRA female to right angle FAKRA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. FAKRA female to FAKRA female cable assembly PE3C4836-12 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a plastic body with plating. Additional dimensions, specifications and CAD drawings for this PE3C4836-12 RF cable are available on our downloadable PDF datasheet. FAKRA right angle female to FAKRA right angle female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA RF cable assembly as per your requirements. |
| 0 | ||
| PE3836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3836-12, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3836-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3836-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3C7836-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7836-150CM, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7836-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7836-150CM can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3836-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3836-18, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3836-18 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3836-18 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax. |
| 0 | ||
![]() TE Connectivity | 8-36152-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: M3.5 #6 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36152-1 | Internal Number: 8-36152-1 | Alias Number: AMPS-8-0036152-1 | TE Connectivity RoHS : Compliant |
| 5,075 | |
| 8-36160-1 | TE Connectivity | TERMINAL,PIDG R 16-14 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36160-1 | Internal Number: 8-36160-1 | Alias Number: AMPS-8-0036160-1 | TE Connectivity RoHS : Compliant |
| 3,537 | ||
| 2301836-1 | TE Connectivity | AMPL PLUG HD20, VERT, 37P, B/L,4-40 S/LO Number of Positions: 37 Connector & Housing Type: Plug Connector System: Wire-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 4 D-Shaped Connector | 37 Plug Wire-to-Board Board Mount | Part Number: 2301836-1 | Internal Number: 2301836-1 | 4 | TE Connectivity RoHS : Compliant |
| 2,394 | ||
| 8-36195-1 | TE Connectivity | SOLIS SPD 22-16COMM 22-18MIL 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Spade Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Spade Terminal | Part Number: 8-36195-1 | Internal Number: 8-36195-1 | Alias Number: AMPS-8-0036195-1 | TE Connectivity RoHS : Compliant |
| 2,150 | ||
| 8-36154-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36154-1 | Internal Number: 8-36154-1 | Alias Number: AMPS-8-0036154-1 | TE Connectivity RoHS : Compliant |
| 1,956 | ||
| 282836-1 | TE Connectivity | TERMI-BLOK PCB MOUNT 5,0MM PEG Number of Positions: 2 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 2 Header Wire-to-Board .197" | Part Number: 282836-1 | Internal Number: 282836-1 | .197" | TE Connectivity RoHS : Compliant |
| 1,272 | ||
| 8-36149-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36149-1 | Internal Number: 8-36149-1 | TE Connectivity RoHS : Compliant |
| 983 | ||
| 8-36150-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36150-1 | Internal Number: 8-36150-1 | TE Connectivity RoHS : Compliant |
| 923 | ||
| 5188836-1 | TE Connectivity | Z-PACK/B22 RAF 110P PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 22 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 22 5 | Hard Metric Backplane Connector | Part Number: 5188836-1 | Internal Number: 5188836-1 | TE Connectivity RoHS : Compliant |
| 540 | ||
| 8-36151-1 | TE Connectivity | PIDG R 22-16COMM 22-18MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36151-1 | Internal Number: 8-36151-1 | TE Connectivity RoHS : Compliant |
| 313 | ||
| 8-36158-1 | TE Connectivity | TERMINAL,PIDG R 16-14 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36158-1 | Internal Number: 8-36158-1 | TE Connectivity RoHS : Compliant |
| 296 | ||
| 1757836-1 | TE Connectivity | AMPLIMITE,R/A RCPT ASY,109,ZN,1 Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 1757836-1 | Internal Number: 1757836-1 | TE Connectivity RoHS : Compliant |
| 224 | ||
| 2-282836-1 | TE Connectivity | TERMI-BLOK PCB MOUNT 90 20P. Number of Positions: 20 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 20 Header Wire-to-Board .197" | Part Number: 2-282836-1 | Internal Number: 2-282836-1 | .197" | TE Connectivity RoHS : Compliant |
| 203 | ||
| 8-36161-2 | TE Connectivity | TERMINAL,PIDG R 12-10 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: #10 Closed Ring Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36161-2 | Internal Number: 8-36161-2 | TE Connectivity RoHS : Compliant |
| 153 | ||
![]() Vyrian | LT8361IMSE#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 2A, 2150kHz Switching Freq-Max, BIPolar, PDSO12 RoHS : Compliant | 11,874 | ||
| AD8361-EVALZ | Analog Devices Inc | RoHS : Compliant | 11,833 | |||
| 8-36161-2 | TE Connectivity | Ring Terminal, 6.64mm2 RoHS : Compliant | 11,770 | |||
| 836129024 | Molex | D Microminiature Connector, 15 Contact(s), Male, Plug RoHS : Compliant | 10,712 | |||
| MAX98361AEWL+T | Analog Devices Inc | CLASS D AUDIO AMPLIFIER RoHS : Compliant | 10,619 | |||
| LT8361IMSE#WTRPBF | Analog Devices Inc | Switching Regulator RoHS : Compliant | 8,747 | |||
| LT8361EMSE#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 2A, 2150kHz Switching Freq-Max, BIPolar, PDSO12 RoHS : Compliant | 8,419 | |||
| LT8361HMSE#WPBF | Analog Devices Inc | Switching Regulator RoHS : Compliant | 8,100 | |||
| LT8361IMSE#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 2A, 2150kHz Switching Freq-Max, BIPolar, PDSO12 RoHS : Compliant | 5,939 | |||
| BRKOUT-FXLN8361Q | NXP Semiconductors | 5,674 | ||||
| 1836189 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,808 | |||
CS8361YDPSR7G![]() | onsemi | Fixed Positive LDO Regulator, 2 Output, 5V1, 5V2, BIPolar, PSSO7 RoHS : Compliant | 4,734 | |||
ADS8361IRHBT![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 2 Func, 4 Channel, Serial Access, CMOS, PQCC32 RoHS : Compliant | 3,882 | |||
| 55836-1200 | Molex | Combination Line Connector RoHS : Compliant | 562 | |||
| 10-214836-10S | Amphenol Corporation | Military Circular Connector, Composite | 540 | |||
![]() Win Source Electronics | AD8361ARTZ | Analog Devices Inc |
| 32,000 | ||
AD8361ARTZ-REEL7![]() | Analog Devices Inc | LF to 2.5 GHz TruPwr Detector RoHS : Not Compliant |
| 30,400 | ||
AD8361ARTZ-RL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ SOT23-6 / RF Detector 2500MHz 6-Pin SOT-23 T/R RoHS : Compliant |
| 29,510 | ||
| LT8361IMSE#PBF | Analog Devices Inc | IC REG BST SEPIC 2A 16MSOP RoHS : Compliant |
| 5,710 | ||
| LT8361EMSE#TRPBF | Analog Devices Inc | IC REG BST SEPIC 2A 16MSOP / Boost, SEPIC Switching Regulator IC Positive Adjustable 1 Output 2A (Switch) 16-TFSOP (0.118", 3.00mm Width), 12 Leads, Exposed Pad RoHS : Compliant |
| 5,580 | ||
| LT8361IMSE#TRPBF | Analog Devices Inc | IC REG BST SEPIC 2A 16MSOP / Boost, SEPIC Switching Regulator IC Positive Adjustable 1 Output 2A (Switch) 16-TFSOP (0.118", 3.00mm Width), 12 Leads, Exposed Pad RoHS : Compliant |
| 5,540 | ||
AD8361ARM![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Not Compliant |
| 5,000 | ||
AD8361ARMZ![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Compliant |
| 5,000 | ||
| AD8361ARMZ-RL7 | Analog Devices Inc |
| 4,700 | |||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Compliant |
| 4,650 | ||
AD8361ARMZ-REEL![]() | Analog Devices Inc | IC RF DETECT 2.5GHZ 8MSOP / RF Detector IC Cellular, CDMA, W-CDMA 2.5GHz 0 ~ 700mV ±0.25dB 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 4,640 | ||
AD8361ARM-REEL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8-MSOP RoHS : Not Compliant |
| 4,560 | ||
| LT8361HMSE#TRPBF | Analog Devices Inc | IC REG BST SEPIC ADJ 2A 16MSOP RoHS : Compliant |
| 3,000 | ||
ADS8361IDBQRG4![]() | Texas Instruments | IC ADC DUAL 16BIT 500KSPS 24QSOP RoHS : Compliant |
| 2,340 | ||
| FXLN8361QR1 | Freescale Semiconductor | ACCELEROMETER 2-8G ANALOG 12QFN RoHS : Compliant |
| 2,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |