| Electronic Components Datasheet Search |
|
84L-TN3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | SM3F-484LG-ACTEL | Microchip Technology Inc | MDL 484 PIN PROASIC3/E FUSION, Projected EOL: |
| 3 | |
![]() Ameya Holding Limited | BVSS84LT1G | onsemi | P-Channel 50 V 10 Ω Surface Mount Power Mosfet - SOT-23-3 RoHS : Compliant | 12,567 | ||
LMT84LP![]() | Texas Instruments | RoHS : Compliant | 1,800 | |||
BSS84LT1G![]() | onsemi | P-Channel 50 V 10 Ohm 225 mW Surface Mount Power MOSFET - SOT-23 RoHS : Compliant | 124 | |||
![]() ComSIT USA | BVSS84LT1G | onsemi | AVAILABLE EU RoHS : Compliant | 42,000 | ||
| US2884LSEAAA000RE | Melexis Microelectronic Integrated Systems | AVAILABLE EU | 12,345 | |||
![]() ComSIT USA | BVSS84LT1G | onsemi | POWER MOSFET SINGLE P-CHANNEL SOT-23 Small Signal Field-Effect Transistor, 0.13A I(D), 50V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 503,250 | ||
BSS84LT1G![]() | onsemi | POWER MOSFET SINGLE P-CHANNEL SOT-23 Small Signal Field-Effect Transistor, 0.13A I(D), 50V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 33,675 | |||
| SMBT1184LT1 | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 22,253 | |||
SBSS84LT1G![]() | onsemi | POWER MOSFET SINGLE P-CHANNEL SOT-23 Small Signal Field-Effect Transistor, 0.13A I(D), 50V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236 RoHS : Compliant | 13,775 | |||
MMBT2484LT1G![]() | onsemi | NPN SILICON LOW NOISE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 60V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 5,950 | |||
| A1384LLHLTT | Allegro MicroSystems LLC | Linear and Magnetic Sensor IC Linear Analog Voltage SOT-23-3 T/R RoHS : Compliant | 2,810 | |||
| UDN2984LW | Vishay Sprague | 8-CHANNEL SOURCE DRIVER Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.35A, BIPolar, PDSO18 RoHS : Not Compliant | 1,138 | |||
| AOT284L | alpha & omega | Power Field-Effect Transistor, 105A I(D), 80V, 0.0057ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 1,000 | |||
| AOB284L | Alpha & Omega Semiconductor | 80V N-Channel MOSFET Power Field-Effect Transistor, 105A I(D), 80V, 0.0057ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 800 | |||
| SLVU284LFT7 | ProTek Devices | ESD Protection Diodes / TVS Diodes 2.8V 1uA 4CH 30kV ESD Contact RoHS : Compliant | 605 | |||
| 2184LPST | CTS Corporation | SMD DIP SWITCH Slide Dip Switch, 4 Switches, SPST, Off-on, Latched, 0.025A, 24VDC, Solder Terminal, Surface Mount-straight RoHS : Not Compliant | 224 | |||
![]() NexGen Digital | BSS84LT1G![]() | onsemi | RoHS : Compliant | 6 | ||
![]() Braemac Americas-Symmetry | IC-VPTO18-4L | iC-Haus | Photoswitch |
| 1 | |
| MA284.LBIC.001 | Taoglas Antenna Solutions | MA284 Adhesive Mount 4in1 Combination GNSS, 2* LTE MIMO Wi-Fi Low Profile Antenna |
| 0 | ||
| SISPM1040-384-LRT-C | Lantronix Inc | LAN SWITCH, Managed Hardened PoE+ Switch, (8) 10/100/1000Base-T PoE+, (4) 100/1000Base-X SFP |
| 0 | ||
| IC-LQNPTO18-4L | iC-Haus | Pulse/AC Light Sensor With Du RoHS : Compliant |
| 0 | ||
![]() DB Roberts | SS8-4L | Essentra Components | SpacerRound8 ScrGry1/2 in Spc Spacer Round 8 Screw Grey | 0 | ||
![]() Flip Electronics | BVSS84LT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,323,000 | |
MMBT2484LT3G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 120,000 | |||
MMBT2484LT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 14,520 | |||
SBSS84LT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 3,000 | |||
![]() Pasternack Enterprises US | PE3W04384LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SSMC Plug Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SSMC plug cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMC plug cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SSMC cable connection on the other. Our SMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3W04384LF/HS-18 can also be known as a SMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04384LF/HS-18 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our SMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SMA plug to SSMC male cable assembly PE3W04384LF/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04384LF/HS-18 can also be used in the other direction and will be a SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMC RF cable assembly as per your requirements. |
| 428 | |
| PE3C8484LF | Pasternack Enterprises | 0 | ||||
| PE3W04684LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Cable Using PE-SR047AL Coax, LF Solder. PE3W04684LF is a SMP female right angle to SMP female cable using PE-SR047AL coax. This Pasternack SMP female right angle to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04684LF SMP female right angle to SMP female cable assembly is constructed with PE-SR047AL coax. | 0 | |||
| PE3W11684LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Female to SMA Male Cable Using PE-047SR Tan Coax with HeatShrink, LF Solder. PE3W11684LF/HS is a 2.92mm female to SMA male cable using PE-047SR coax. This Pasternack 2.92mm female to SMA male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 2.92mm to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11684LF/HS 2.92mm female to SMA male cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W12484LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to N Male Low Loss Cable 48 Inch Length Using LMR-400-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated N male to N male low loss cable 48 inch length using LMR-400-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 48 inch length using LMR-400-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12484LF/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12484LF/HS-48 RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.5:1. Type N plug to type N plug cable assembly PE3W12484LF/HS-48 is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12584LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female to SMA Female Cable Using LMR-400-UF Coax with HeatShrink, LF Solder. PE3W12584LF/HS is a N female to SMA female cable using LMR-400-UF coax. This Pasternack N female to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12584LF/HS N female to SMA female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W20384LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. C Male Right Angle to HN Male Cable Using RG400 Coax with HeatShrink, LF Solder. PE3W20384LF/HS is a C male right angle to HN male cable using RG400 coax. This Pasternack C male right angle to HN male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm HN for connector 2. C right angle to HN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20384LF/HS C male right angle to HN male cable assembly is constructed with RG400 coax. | 0 | |||
| PE35184LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to 3.5mm Male Cable 12 Inch Length Using PE-SR402FL Coax, LF Solder., Radio frequency assembly 3.5mm male to 3.5mm male cable 12 inch length using PE-SR402FL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to 3.5mm male cable 12 inch length using PE-SR402FL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. PE35184LF-12 can also be known as a 3.5mm plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm plug cable assembly PE35184LF-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency 3.5mm male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 3.5mm plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm male cable 12 inch length using PE-SR402FL coax, LF solder. |
| 0 | ||
| PE3W12484LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to N Male Low Loss Cable Using LMR-400-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated N male to N male low loss cable using LMR-400-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable using LMR-400-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12484LF/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12484LF/HS RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.5:1. Type N plug to type N plug cable assembly PE3W12484LF/HS is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W17584LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using PE-C195 Coax, LF Solder. PE3W17584LF is a SMA female to SMA female cable using PE-C195 coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17584LF SMA female to SMA female cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE34284LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. TNC Male to TNC Male Cable Using PE-SR405AL Coax. PE34284LF is a TNC male to TNC male cable using PE-SR405AL coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34284LF TNC male to TNC male cable assembly is constructed with PE-SR405AL coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3784LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using RG58 Coax with HeatShrink, LF Solder. PE3784LF/HS is a N male to SMA male right angle cable using RG58 coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3784LF/HS N male to SMA male right angle cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C1584LF/PH90 | Pasternack Enterprises | 0 | ||||
| PE3C5984LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-P086HF Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-P086HF coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-P086HF coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 2.4mm cable is a male to male coax assembly, PE3C5984LF, can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5984LF is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-P086HF coax, LF solder. | 0 | |||
| PE34584LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. 3.5mm Male to 3.5mm Female Cable Using PE-SR405AL Coax. PE34584LF is a 3.5mm male to 3.5mm female cable using PE-SR405AL coax. This Pasternack 3.5mm male to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34584LF 3.5mm male to 3.5mm female cable assembly is constructed with PE-SR405AL coax. | 0 | |||
![]() Vyrian | WSHM28184L000FEA | Vishay Intertechnologies | Fixed Resistor, Metal Strip, 7W, 0.004ohm, 1% +/-Tol, 200ppm/Cel, Surface Mount, 2818 RoHS : Compliant | 14,750 | ||
MMBF5484LT1G![]() | onsemi | RF Small Signal Field-Effect Transistor, 1-Element, Very High Frequency Band, Silicon, N-Channel, Junction FET, TO-236AB RoHS : Compliant | 11,918 | |||
NCP584LSN09T1G![]() | onsemi | Fixed Positive LDO Regulator, 0.9V, 0.7V Dropout, CMOS, PDSO5 RoHS : Compliant | 11,169 | |||
NCP584LSN18T1![]() | onsemi | Fixed Positive LDO Regulator, 1.8V, 0.3V Dropout, PDSO5 RoHS : Not Compliant | 10,921 | |||
NCP584LSN12T1![]() | onsemi | Fixed Positive LDO Regulator, 1.2V, 0.5V Dropout, PDSO5 RoHS : Not Compliant | 9,296 | |||
| UC384L | Texas Instruments | Analog Circuit | 8,898 | |||
| MAX44284LABS | Analog Devices (Maxim Integrated) | 7,616 | ||||
| MAX16984LEVKIT | Analog Devices (Maxim Integrated) | 5,354 | ||||
| UC184L | Texas Instruments | Analog Circuit | 4,251 | |||
| UC284L | Texas Instruments | Analog Circuit | 4,200 | |||
XC3SD1800A-4CS484LI![]() | AMD Xilinx | Field Programmable Gate Array, 4160 CLBs, 1800000 Gates, 250MHz, 37440-Cell, CMOS, PBGA484 RoHS : Not Compliant | 3,980 | |||
XC3SD1800A-4CSG484LI![]() | AMD Xilinx | Field Programmable Gate Array, 4160 CLBs, 1800000 Gates, 250MHz, 37440-Cell, CMOS, PBGA484 RoHS : Compliant | 3,354 | |||
XC3SD3400A-4CS484LI![]() | AMD Xilinx | Field Programmable Gate Array, 5968 CLBs, 3400000 Gates, 250MHz, 53712-Cell, CMOS, PBGA484 RoHS : Not Compliant | 2,585 | |||
XC3SD3400A-4CSG484LI![]() | AMD Xilinx | Field Programmable Gate Array, 5968 CLBs, 3400000 Gates, 250MHz, 53712-Cell, CMOS, PBGA484 RoHS : Compliant | 1,717 | |||
MMBF5484LT1![]() | onsemi | RF Small Signal Field-Effect Transistor, 1-Element, Very High Frequency Band, Silicon, N-Channel, Junction FET, TO-236AB RoHS : Not Compliant | 391 | |||
![]() Waytek, Inc. | B151-7184-L | Eaton Electronics | Clear Tall Cover Power Distribution Connector |
| 1,327 | |
![]() Wuhan P&S | BVSS84LT1G | onsemi | RoHS : Compliant |
| 360,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |