| Electronic Components Datasheet Search |
|
8509L-AE3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 097-8509-010 | ITT Interconnect Solutions | Connector: circular; Automotive |
| 813 | |
| DS850-9 | Advanced Energy Industries Inc | Power supply: switching; AC/DC; 850W; Uin: 90÷264VAC; 48V; 17.5A |
| 809 | ||
| 218509-1041 | Molex | Socket; female; Inom: 2A; 125V; PIN: 4; 2mm; Imax: 2A; tinned; black |
| 300 | ||
| 218509-1043 | Molex | Connector: wire-wire/PCB; socket; female; data; Inom: 2A; 125V; 2mm |
| 300 | ||
| 218509-1082 | Molex | Connector: wire-wire/PCB; socket; female; data; Inom: 2A; 125V; 2mm |
| 50 | ||
| 218509-1084 | Molex | Connector: wire-wire/PCB; socket; female; data; Inom: 2A; 125V; 2mm |
| 50 | ||
| 104-8509-000 | ITT Interconnect Solutions | 104-8509-000 |
| 21 | ||
| 232-1285-09-0602J | 3M | 232-1285-09-0602J |
| 13 | ||
| BKE850901N | Bahco | Wrench-set; spanner; 6-angles socket,Phillips,slot; Kit: case |
| 6 | ||
| 9457850930 | Weidmüller Interface GmbH & Co. KG | 9457850930 RoHS : Compliant |
| 0 | ||
| KI8509 | ifm efector inc | Sensor: capacitive |
| 0 | ||
| 18509 | ProLinear/PONTECH Inc | Socket: 6-angles; socket spanner; HEX 9mm; 1/2" |
| 0 | ||
| 1185090000 | Weidmüller Interface GmbH & Co. KG | Cable gland: cable; double,straight RoHS : Compliant |
| 0 | ||
| 01 0085.09X 5.3 ORING 60SI RED | Oring Uszczelnienia Techniczne | O-ring gasket; silicone; Thk: 5.3mm; Øint: 85.09mm; red; -60÷160°C |
| 0 | ||
| 1850900000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 60A; 1kV RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 2298509-1 | TE Connectivity | Housing for MATE-AX Series Male Terminals Crimp Phosphor Bronze Reel - Trays (Alt: 2298509-1) RoHS : Not Compliant |
| 108,000 | |
| 218509-1042 | Molex | Cable, UL 10002, Receptacle-Receptacle, 24 AWG, 150mm L, Matte Tin, Black, Copper Alloy, Crimp - Bulk (Alt: 83AJ0549) RoHS : Compliant |
| 0 | ||
| TW-05-02-T-S-185-095 | Samtec Inc | - Bulk (Alt: TW-05-02-T-S-185-095) RoHS : Compliant |
| 0 | ||
| 130085-0913 | Molex | 135416316G6 W/62' 16C/#14 CABLE, 3FMYE - Bulk (Alt: 1300850913) RoHS : Compliant |
| 0 | ||
| 130085-0995 | Molex | 116417303X3L W/100'#10/3;2FMYE & ST1 - Bulk (Alt: 1300850995) RoHS : Compliant |
| 0 | ||
| 1850900000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 1850900000) RoHS : Compliant |
| 0 | ||
| 85095120 | Qnity Laird | - Bulk (Alt: 85095120) RoHS : Compliant |
| 0 | ||
| TW-03-11-F-D-185-090 | Samtec Inc | - Bulk (Alt: TW-03-11-F-D-185-090) RoHS : Compliant |
| 0 | ||
| EB1085-09-600 | Amphenol Corporation | B43720E8188M600 - Bulk (Alt: EB1085-09-600) RoHS : Compliant |
| 0 | ||
| 024-8509-240 | ITT Interconnect Solutions | - Bulk (Alt: 024-8509-240) RoHS : Not Compliant |
| 0 | ||
| CXM-18-50-95-36-AA40-F5-3 | Luminus Devices | Generation 4 COB Array LED Neutral White 5000K 18mm LES Diameter 95 CRI 36V Tray - Trays (Alt: CXM-18-50-95-36-AA40-F5-3) RoHS : Compliant |
| 0 | ||
| 8-509408-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 8-509408-2) RoHS : Not Compliant |
| 0 | ||
| 85095090 | Qnity Laird | - Bulk (Alt: 85095090) RoHS : Compliant |
| 0 | ||
| FW-06-05-G-D-585-090-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 14.86 mm, 12 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Tape and Reel (Alt: FW-06-05-G-D-585-090-TR) RoHS : Compliant |
| 0 | ||
| HW-13-12-F-D-685-090-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 17.4 mm, 26 Contacts, Solder, 2 Rows, 2.54 mm - Bulk (Alt: HW-13-12-F-D-685-090-LL) RoHS : Compliant |
| 0 | ||
![]() Newark | MP008509 | SPC Multicomp | Connector Housing, Rcpt, 9Pos, 3.96Mm; |Multicomp Pro MP008509 RoHS : Compliant |
| 4,959 | |
| TW-03-02-L-D-185-095 | Samtec Inc | Conn Stack Brd, 2Mm, 6Pos, Hdr; |Samtec, Inc. TW-03-02-L-D-185-095 RoHS : Compliant |
| 951 | ||
| TW-05-02-T-S-185-095 | Samtec Inc | Conn Stack Brd, 2Mm, 5Pos, Hdr; |Samtec, Inc. TW-05-02-T-S-185-095 RoHS : Compliant |
| 640 | ||
| ZW-25-11-S-D-585-090 | Samtec Inc | Flexi Board Stack Head,0.100 Pitch; |Samtec, Inc. ZW-25-11-S-D-585-090 RoHS : Compliant |
| 305 | ||
| ZW-50-11-S-D-585-090 | Samtec Inc | Flexi Board Stack Head,0.100 Pitch; |Samtec, Inc. ZW-50-11-S-D-585-090 RoHS : Compliant |
| 250 | ||
| ZW-04-11-L-S-585-090-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 4Pos, Hdr; |Samtec, Inc. ZW-04-11-L-S-585-090-LL RoHS : Compliant |
| 250 | ||
| TW-06-04-S-D-285-095 | Samtec Inc | Conn Stack Brd, 2Mm, 12Pos, Hdr; |Samtec, Inc. TW-06-04-S-D-285-095 RoHS : Compliant |
| 243 | ||
| TW-13-03-G-D-285-090 | Samtec Inc | Conn Stack Brd, 2Mm, 26Pos, Hdr; |Samtec, Inc. TW-13-03-G-D-285-090 RoHS : Compliant |
| 231 | ||
| TW-20-08-S-D-585-090 | Samtec Inc | Conn Stack Brd, 2Mm, 40Pos, Hdr; |Samtec, Inc. TW-20-08-S-D-585-090 RoHS : Compliant |
| 182 | ||
| TW-20-09-G-D-185-095 | Samtec Inc | Conn Stack Brd, 2Mm, 40Pos, Hdr; |Samtec, Inc. TW-20-09-G-D-185-095 RoHS : Compliant |
| 182 | ||
| TW-15-05-S-D-285-090 | Samtec Inc | Conn Stack Brd, 2Mm, 30Pos, Hdr; |Samtec, Inc. TW-15-05-S-D-285-090 RoHS : Compliant |
| 131 | ||
| TW-14-05-S-D-385-090 | Samtec Inc | Conn Stack Brd, 2Mm, 28Pos, Hdr; |Samtec, Inc. TW-14-05-S-D-385-090 RoHS : Compliant |
| 131 | ||
| TW-20-05-L-D-285-090 | Samtec Inc | Conn Stack Brd, 2Mm, 40Pos, Hdr; |Samtec, Inc. TW-20-05-L-D-285-090 RoHS : Compliant |
| 96 | ||
| 85099R | GEARWRENCH | Set Wr Rat Xl Met 16Pc Roll; |Gearwrench 85099R RoHS : Not Compliant |
| 55 | ||
| 8509 | Abbatron | Spacer; Body Diameter:0.25"; Bore Size:0 |Abbatron Hh Smith 8509 RoHS : Not Compliant |
| 0 | ||
![]() RS | DLCBS-6-01 (70208509) | Essentra Components | CIRCUIT BOARD SUPPORT, DUAL LOCKING, 4 MM, NYLON 6/6, 7.1 MM, 3/8 IN. |
| 19,384 | |
| 5308 509 | Altech Corporation | CABLE GLAND, PG-9, RANGE 0.098-0.315", POLYAMIDE, NEOPRENE SEAL, 5308 SERIES |
| 222 | ||
| B-8-50-9-C | Ideal Industries Inc | CBL TIE,8IN,50LB, NAT |
| 100 | ||
| 3685097 | Wakefield-Vette | RACK CABINET ACCESSORIES COLLAR SCREW CHEESE HEAD SLOTTED M2.5 X 11 PACK 100 |
| 37 | ||
| 2778509 | RS Pro | CONTACTOR, 24 V DC COIL, 3 POLE, 22 A, 11KW, 3 TO 400V, UL CE APPROVALS |
| 10 | ||
| 7785095 | RS Pro | TIMING BELT 190 TOOTH 396.08MM LENGTHX6MM WIDTH |
| 8 | ||
| 1828509 | RS Pro | MALE HDMI TO MALE HDMI PLUG 4K 16FT WHITE PVC SHEATH GOLD PLATED PLUGS |
| 6 | ||
| 4828509 | RS Pro | NICKEL PLATED BRASS PAN HEAD MACHINE SCREWS M2.5X25MM |
| 4 | ||
| NMA-8509 | Quest Technology International Inc | GREY 8C RJ-45 TO D-25 MALE MOD ADAPTER |
| 3 | ||
| 7388509 | RS Pro | 50M FIBRE OPTIC CABLE ASSEMBLY CONNECTOR A: ST CONNECTOR B: ST MULTI MODE OM1 |
| 2 | ||
| 185090F-01-1 | BEP | SWITCHABLE RESET 90A FLUSH MOUNT |
| 2 | ||
| 850908 (00051115359354) | 3M | STANDARD ABRASIVES BUFF AND BLEND HP DISC, 8 IN X 1/2 IN A VFN |
| 2 | ||
| 0054485099 | Apex Tool Group LLC | 0.5 MM STRAIGHT CONICAL SOLDERING IRON TIP FOR USE W/WXP65 &WP65 SOLDERING IRONS |
| 1 | ||
| 2X8A_82_MXPM-S50-0-1/-11_NE (85091060) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, PCB SOCKET 2.54 PITCH KEYED 16 POSITION |
| 1 | ||
| 8509 | HH Smith | SPACER; ROUND; ALUMINUM; #6 ID; 1/4" OD; 1 1/2" LENGTH |
| 0 | ||
![]() Bisco Industries | 885-096 | Zierick Manufacturing Corporation | 13,096 | |||
| 850-90-005-20-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 2,139 | |||
| RCS 85(093)16 | Anderson Components Corp | 504 | ||||
| WJ8509-B-0832-14 | W.J. Roberts Co Inc | 257 | ||||
| 850-90-003-20-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 198 | |||
| 850-90-008-10-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 66 | |||
| 850-90-015-10-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 42 | |||
| 850-90-010-10-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 15 | |||
| 850-90-006-30-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 10 | |||
| 610PY08509R | Colson Group | 4 | ||||
| 610PY08509S | Colson Group | 4 | ||||
| RE8509-03GA4 | Electronic Hardware Corporation (EHC) | 2 | ||||
| 728 608 509 | MISC. FITTINGS/ELBOWS | 2 | ||||
| 217-078509 | Acme Industrial Company | 2 | ||||
| 58-28-509-24 | Southco | 58 Captive Screws |
| 1 | ||
![]() Rochester Electronics | NCV8509PDW18R2G![]() | onsemi | IC VOLT REG Fixed 2 REG 3.3V, 1.8V 115mA, 100mA 16-SOIC T/R RoHS : Compliant |
| 2,186 | |
NCV8509PDW25R2G![]() | onsemi | IC VOLT REG Fixed 2 REG 5V, 2.5V 115mA, 100mA 16-SOIC T/R RoHS : Compliant |
| 2,950 | ||
AD8509ARUZ-REEL![]() | Analog Devices Inc | Display Drivers and Controller LCD 64 grey scale 48-SOP T/R RoHS : Compliant |
| 21,723 | ||
AD8509ARU-REEL![]() | Analog Devices Inc | Display Drivers and Controller LCD 64 grey scale 48-SOP T/R RoHS : Not Compliant |
| 58,356 | ||
CSD18509Q5BT![]() | Texas Instruments | MOSFET N-Channel 40V 100A (Ta) 8-SON T/R RoHS : Compliant |
| 5 | ||
8509701EA![]() | Texas Instruments | IC Data Selector/Multiplexer 1 Element 4 x 2:1 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 183 | ||
ADS8509IDB![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 28-SOP Tube RoHS : Compliant |
| 3 | ||
8509601EA![]() | Texas Instruments | IC Data Selector/Multiplexer 1 Element 2 x 4:1 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 164 | ||
| HA1-2850-9 | Harris Semiconductor | Op Amp Standard 470MHz 14-DIP RoHS : Not Compliant |
| 2,094 | ||
| HA7-2850-9 | Harris Semiconductor | Op Amp Standard 470MHz 8-DIP RoHS : Not Compliant |
| 338 | ||
| UPD46185092BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant |
| 239 | ||
| UPD46185094BF1-E33-EQ1-A | Renesas Electronics Corporation | QDR II 18Mbit 2M x 9 1.7V - 1.9V HSTL 300MHz 450ps 165-BGA Tray RoHS : Compliant |
| 236 | ||
| UPD46185094BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR II 18Mbit 2M x 9 1.7V - 1.9V HSTL 250MHz 450ps 165-BGA Tray RoHS : Compliant |
| 571 | ||
![]() Sager | 8509 | Calex Mfg Co Inc | Datalogging & Acquisition | 0 | ||
| FW-20-05-G-D-585-090-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 2185091102 | Molex | Rectangular Cable Assemblies 2.00MM MILLI-GRID OTS ASSY RoHS : Compliant |
| 0 | ||
| 1300850907 | Molex | AC Power Cords 114205316G6 W/40' #14/16C, 3FMYE | 0 | |||
| 1300850952 | Molex | Cable Mounting & Accessories 125317320J7 REEL W/J-BOX;#7 CONNECTOR | 0 | |||
| 1300850989 | Molex | AC Power Cords 116417304G2 CABLE REEL W/100' #12/4 SOOW | 0 | |||
| 850-90-002-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 850-90-027-20-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 850-90-032-30-002000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 85095120 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding JCS-NEXT/SS6M .120x12x24 |
| 0 | ||
| TW-23-02-F-S-185-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-24-11-F-S-185-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-25-03-T-Q-285-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-32-07-F-D-485-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-05-F-D-385-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() ComSIT USA | 6208509110000 | KYOCERA Corporation | 1.0 MM PITCH VERTICAL SMT SLIDE LOCK FFC/FPC Connector, 9 Contact(s), 1 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal RoHS : Compliant | 880 | ||
| 18509006 | Mentor Graphics | Electronic Component RoHS : Compliant | 200 | |||
| 18509004 | Mentor Graphics | Electronic Component RoHS : Compliant | 200 | |||
![]() Interstate Connecting Components | 104-8509-000 | ITT Interconnect Solutions | 104-8509-000 | 0 | ||
| SJS850900 | Amphenol PCD | BACC63EDB-09PNH BACC63EDB-09PNH |
| 0 | ||
| 8-509121-5 | TE Connectivity | COMPACT CYLINDER, CQSW B12-20D | 0 | |||
| 248-8509-000 | ITT Interconnect Solutions | DUMMY REC. REAR PANEL MT CA3105B-05 # 24 | 0 | |||
| 024-8509-240 | ITT Interconnect Solutions | 024-8509-240 | 0 | |||
| 97-3102A-12S(850)(958) | Amphenol Industrial Operations | Box Mtg Recept Shl, Sz 12S, Gr | 0 | |||
| 8-509408-2 | TE Connectivity | CYLIND.CQ2B12-15D |
| 0 | ||
| 8-509101-3 | TE Connectivity | COVER PLATE | 0 | |||
| 8-509149-1 | TE Connectivity | SEAL RING O-M5 NO. 3565 | 0 | |||
| 000L85091 | ITT Interconnect Solutions | FRCIR030R-18-1P-F80 | 0 | |||
| 8-509416-8 | TE Connectivity | CABLE CLAMP | 0 | |||
| 97-3106A-18(0850)(936) | Amphenol Industrial Operations | 5015 PLG SHL#18 |
| 0 | ||
| 031-8509-010 | ITT Interconnect Solutions | 318509010 | 0 | |||
| 8-509874-4 | TE Connectivity | EXCHANGEABLE ARTICLES, PRINT I | 0 | |||
| 8-509916-7 | TE Connectivity | SPARE PART SET SERVO MOTOR,5.8 | 0 | |||
![]() PEI Genesis | 075-8509-000 | ITT Interconnect Solutions | RoHS : Compliant |
| 236 | |
| 248-8509-000 | ITT Interconnect Solutions |
| 0 | |||
| 88-538509-46P | Amphenol Corporation |
| 0 | |||
| 21-033385-091 | Amphenol Corporation |
| 0 | |||
| 052-8509-004 | ITT Interconnect Solutions |
| 0 | |||
| A4593-085-095-0 | Amphenol Positronic |
| 0 | |||
| 052-8509-002 | ITT Interconnect Solutions |
| 0 | |||
| 88-538509-46E | Amphenol Aerospace |
| 0 | |||
| 23A03138-509 | SOURIAU-SUNBANK |
| 0 | |||
| 075-8509-001 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 85091-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 45,540 | |
| TW-03-02-L-D-185-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 628 | ||
| TW-05-02-T-S-185-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 422 | ||
| TW-03-05-T-D-385-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 216 | ||
| ZW-25-11-S-D-585-090 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 201 | ||
| ZW-04-11-L-S-585-090-LL | Samtec Inc | .100 Flex Stack RoHS : Compliant |
| 165 | ||
| ZW-50-11-S-D-585-090 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 165 | ||
| TW-06-04-S-D-285-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 160 | ||
| TW-13-03-G-D-285-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 152 | ||
| 85097-45 | Honeywell Sensing and Control | Switch |
| 110 | ||
| TW-15-05-S-D-285-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 86 | ||
| FW-10-04-L-D-185-090 | Samtec Inc | Cable Assembly, Wire-to-Board, Female RoHS : Compliant |
| 59 | ||
| 850957-000 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 26 | ||
| 607.5685.094 | Altech Corporation | SRF SENSOR FOR SERIES CONNECTION WITHOUT |
| 7 | ||
| 85094-44 | Honeywell Sensing and Control | Switch |
| 2 | ||
![]() PUI | 12.85090 | 5 | ||||
![]() Chip 1 Exchange | 12.8509 | Geyer Electronic E K | INSTOCK | 5 | ||
| 1D85098-521 | INSTOCK | 2 | ||||
| 1D85098-519 | INSTOCK | 1 | ||||
| 1D85098-527 | INSTOCK | 1 | ||||
| 1D85098-533 | INSTOCK | 1 | ||||
| 1D85098-535 | INSTOCK | 1 | ||||
| 1D85093-2 | INSTOCK | 1 | ||||
| 1D85093-1 | INSTOCK | 1 | ||||
| 1D85098-523 | INSTOCK | 1 | ||||
| 1D85098-531 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 875685093 | Molex | Conn IDC Connector RCP 50 POS 2mm IDT RA Cable Mount Tray (Alt: 875685093) RoHS : Compliant | 0 | ||
| 875685093 | Molex | Conn IDC Connector RCP 50 POS 2mm IDT RA Cable Mount Tray - Tape and Reel (Alt: 875685093) RoHS : Compliant | 0 | |||
| 2185091102 | Molex | Cable Assembly UL 10002 24AWG 015m 10Position Wire to Board to 10Position Wire to Board Receptacle (Alt: 2185091102) RoHS : Compliant | 0 | |||
| 2185091102 | Molex | Cable Assembly UL 10002 24AWG 015m 10Position Wire to Board to 10Position Wire to Board Receptacle (Alt: 2185091102) RoHS : Compliant | 0 | |||
| 1850900000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1850900000) RoHS : Compliant | 0 | |||
| 1850950000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1850950000) RoHS : Compliant | 0 | |||
| 8-509408-2 | TE Connectivity | (Alt: 8-509408-2) RoHS : Not Compliant | 0 | |||
5025850970![]() | Molex | - Tape and Reel (Alt: 5025850970) RoHS : Compliant | 0 | |||
| 850957-000 | TE Connectivity | AMP850957000 (Alt: 850957-000) RoHS : Compliant | 0 | |||
| XXX9185094 | Molex | 093 Wafercon PCB Conn MixTerm 9Ckt (Alt: XXX9185094) RoHS : Compliant | 0 | |||
| 1850940000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1850940000) RoHS : Compliant | 0 | |||
| 8-509874-4 | TE Connectivity | AMP85098744 (Alt: 8-509874-4) RoHS : Not Compliant | 0 | |||
| 8-509874-4 | TE Connectivity | AMP85098744 (Alt: 8-509874-4) RoHS : Not Compliant | 0 | |||
| 8-5099973-1 | TE Connectivity | (Alt: 8-5099973-1) RoHS : Compliant | 0 | |||
| TW-03-11-F-D-185-090 | Samtec Inc | (Alt: TW-03-11-F-D-185-090) RoHS : Compliant | 0 | |||
![]() Avnet Asia | B39851B8509P810 | Qualcomm RFFE Filter Products | (Alt: B39851B8509P810) RoHS : Compliant | 0 | ||
| 0875685093 | Molex | (Alt: 0875685093) RoHS : Compliant | 0 | |||
| 0022285094 | Molex | (Alt: 0022285094) RoHS : Compliant | 0 | |||
0528850974![]() | Molex | (Alt: 0528850974) RoHS : Compliant | 0 | |||
| 850957-000 | TE Connectivity | (Alt: 850957-000) RoHS : Compliant | 0 | |||
![]() Avnet Silica | L128-5090CA3500001 | Lumileds | (Alt: L128-5090CA3500001) RoHS : Compliant | 0 | ||
| L128-5090SA35A00A1 | Lumileds | LUXEON 2835 Commercial 3VCoolwhite 2835 S 3V 90 CRI Full Distribution5000K90 (Alt: L128-5090SA35A00A1) RoHS : Compliant | 0 | |||
| L128-5090HA35000K1 | Lumileds | LED Chip Cool White 5000K 480mA 2Pin SMD TR (Alt: L128-5090HA35000K1) RoHS : Compliant | 0 | |||
| L128-5095HA35000B5 | Lumileds | LED Chip Cool White 5000K 480mA 2Pin SMD TR (Alt: L128-5095HA35000B5) RoHS : Compliant | 0 | |||
| L128-5090EA3500001 | Lumileds | (Alt: L128-5090EA3500001) RoHS : Compliant | 0 | |||
| L128-5090CA3500002 | Lumileds | (Alt: L128-5090CA3500002) RoHS : Compliant | 0 | |||
| L128-5090EC3500001 | Lumileds | (Alt: L128-5090EC3500001) RoHS : Compliant | 0 | |||
| L128-5090HA35000B5 | Lumileds | LED Chip Cool White 5000K 480mA 2Pin SMD TR (Alt: L128-5090HA35000B5) RoHS : Compliant | 0 | |||
| L128-5090NA3500001 | Lumileds | (Alt: L128-5090NA3500001) RoHS : Compliant | 0 | |||
| L128-5090EA3500005 | Lumileds | LED Chip Neutral White 5000K 150mA 2Pin SMD TR (Alt: L128-5090EA3500005) RoHS : Compliant | 0 | |||
| L128-5090HA35000H5 | Lumileds | LUXEON MidPower 2835 HE Coolwhite 2835HE 3V 90 CRI 3 SDCM PQXY CCT 5000K CRI 90 (Alt: L128-5090HA35000H5) RoHS : Compliant | 0 | |||
| L1I0-0850955800000 | Lumileds | (Alt: L1I0-0850955800000) RoHS : Compliant | 0 | |||
| L128-5090NA3500005 | Lumileds | LED Chip Neutral White 5000K 300mA 2Pin SMD TR (Alt: L128-5090NA3500005) RoHS : Compliant | 0 | |||
| L128-5090HA35000B1 | Lumileds | (Alt: L128-5090HA35000B1) RoHS : Compliant | 0 | |||
| L128-5090CB3500001 | Lumileds | (Alt: L128-5090CB3500001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 385-091 | Spaenaur | IN STOCK SHIP TODAY | 4,000 | ||
| 548509-0100 | IN STOCK SHIP TODAY | 4 | ||||
| 2207-7985-09 | MACOM | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | 1285098 | Essentra Components | 0 | |||
| E5-2-085-091 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-091 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 498509 | Essentra Components | 0 | ||||
| 58-28-509-24 | Southco | PANEL SCREW 6-32 | 0 | |||
| 20828509 | Essentra Components | 0 | ||||
| E5-2-085-090 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1285096 | Essentra Components | 0 | ||||
| 1285097 | Essentra Components | 0 | ||||
| E5-1-085-090 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | QEDM-8509 | Broadcom Limited | Optical ShaftEncoder Components (Alt: QEDM-8509) RoHS : Compliant | 0 | ||
| CXM-18-50-90-36-AA00-F2-3 | Luminus Devices | CXM18 (Alt: CXM-18-50-90-36-AA00-F2-3) RoHS : Compliant | 0 | |||
| CXM-18-50-90-36-AA40-F5-3 | Luminus Devices | (Alt: CXM-18-50-90-36-AA40-F5-3) RoHS : Compliant | 0 | |||
| CXM-18-50-90-36-AA30-F4-3 | Luminus Devices | CXM18 (Alt: CXM-18-50-90-36-AA30-F4-3) RoHS : Compliant | 0 | |||
| C18509_DAISY-MINI-3X1-SHD-MATT | LEDIL | Shade for LM28xB LEDs Polycarbonate Black with Matt Finish Box (Alt: C18509_DAISY-MINI-3X1-SHD-MATT) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 512850908 | BJG Electronics | BJG Microwave C | 1,669,755 | ||
| 518850929 | FDH Electronics | BJG Microwave C | 1,669,755 | |||
| 518850907 | FDH Electronics | BJG Microwave C | 1,669,755 | |||
| 512850994 | BJG Electronics | BJG Microwave C | 1,669,755 | |||
| 518850932 | FDH Electronics | BJG Microwave C | 1,113,170 | |||
| 512850987-7 | BJG Electronics | BJG Microwave C | 834,877 | |||
| 512850947 | BJG Electronics | BJG Microwave C | 6,204 | |||
| 512850966-5 | BJG Electronics | BJG Microwave C | 4,772 | |||
| 512850966-12 | FDH Electronics | BJG Microwave C | 4,431 | |||
| 518850902-15 | BJG Electronics | BJG Microwave C | 3,446 | |||
| M10-195985-093 | Amphenol Aerospace | Connector Acc |
| 1,553 | ||
| 10-195985-093 | Amphenol Aerospace | Circular Conn |
| 313 | ||
| 10-417685-097 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
| 1958509-1 | TE Connectivity | Wire Management RoHS : Compliant |
| 0 | ||
| D-SCE-1K-18-50-9 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
![]() Flip Electronics | L128-5090EC3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 348,000 | |
| L128-5090NA3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 40,000 | ||
| L128-5090CA3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 8,000 | ||
![]() Master Electronics | FW-02-03-H-D-085-094 | Samtec Inc | RoHS : Compliant |
| 0 | |
| FW-02-03-S-D-285-097 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-10-03-G-D-085-094-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-20-05-G-D-585-090-A | Samtec Inc | Board Stackers & Spacers Pin Header 14.86 mm 40 Contacts Solder 2 Rows 1.27 mm FW Series RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-185-091 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-085-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 218509-1042 | Molex | Molex 218509-1042 Rectangular Cable Assemblies Milli-Grid Dual Row R-R 4 Circuit 150mm RoHS : Compliant |
| 0 | ||
| MW-10-03-G-D-185-090-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-21-03-F-6-285-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-22-05-F-T-385-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-23-02-F-S-185-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-23-02-T-S-185-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-24-11-F-S-185-090 | Samtec Inc | Conn Board Stacker HDR 24 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TW-25-03-F-T-285-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-25-03-T-Q-285-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1850974 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 50 | |
| 1850958 | Phoenix Contact | Pluggable Terminal Blocks 12 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 50 | ||
| 1850987 | Phoenix Contact | Pluggable Terminal Blocks 15 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 50 | ||
| 607.5685.094 | Altech Corporation | Sensor Cables / Actuator Cables SRF SENSOR FOR SERIES CONNECTION WITHOUT DCD |
| 10 | ||
| 607.5685.095 | Altech Corporation | Sensor Cables / Actuator Cables SRF SENSOR FOR SERIES CONNECTION WITHOUT DCD |
| 8 | ||
| C31CA85090 | Seiko Epson Corporation | TM-T88V-950 POWERED USB+ USB EDG AUTO CUT NO POWER SUPPLY INCL |
| 2 | ||
| 1850916 | Phoenix Contact | PCB Connector, Female, 1Row 8 Pos, 3.81mm pitch, 28-16 AWG Screw, FRONT-MC 1,5/ 8-STF-3,81 RoHS : Compliant |
| 0 | ||
| 1850932 | Phoenix Contact | Pluggable Terminal Blocks 10 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 85097-02 | Honeywell Sensing and Control | DC hour meter, E-mech; Digital; 6 Dig; 0.12" DigH; Blade; Polyester; Accy +/-0.02% |
| 0 | ||
| 1850990 | Phoenix Contact | Pluggable Terminal Blocks 16 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 1850903 | Phoenix Contact | Pluggable Terminal Blocks 7 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| 1850929 | Phoenix Contact | Pluggable Terminal Blocks 9 Pos 3.81mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8509/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 208 | ||
| PE3C8509/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-36 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8509-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 150 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-150CM, can also be known as a low PIM type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8509-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-150CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM. |
| 52 | ||
| PE3C8509-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 200 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-200CM, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-200CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM. |
| 52 | ||
| PE3C8509-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 48 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 48 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 48 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-48, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509-48 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-48 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 48 inch. |
| 52 | ||
| PE3C8509/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 24 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 24 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-24 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-24 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8509-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 60 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-60, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-60 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch. |
| 52 | ||
| PE3C8509/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-50CM can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-50CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8509-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 36 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-36, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-36 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch. |
| 52 | ||
| PE3C8509-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-50CM, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-50CM can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM. |
| 52 | ||
| PE3C8509-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 24 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-24, can also be known as a low PIM N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8509-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-24 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 24 inch. |
| 52 | ||
| PE8509 | Pasternack Enterprises | Key Specifications, DC Input Connector Series: SMA, DC Input Gender: Female, Impedance: 50 Ohm, RF Output Connector Series: SMA, RF Output Gender: Male, Minimum Frequency: 12 GHz, Maximum Frequency: 18 GHz. SMA Calibrated Noise Source Module, Output ENR of 26 dB, +28 VDC, 12 GHz to 18 GHz. PE8509 is a RF noise source generator from Pasternack that is manufactured to precise radio frequency component standards. This RF noise generator is an in-line connectorized component design with a noise output ENR of 26 dB. Our coaxial standard power RF generator is constructed with SMA connectors and has a frequency range of 12 GHz for the minimum and 18 GHz for the maximum. Our SMA RF noise generator source PE8509 is part of more than 40,000 RF, microwave and millimeter wave component from supplier Pasternack. This noise generator source for RF is in-stock at our ISO 9001:2008 facility in Irvine, CA. Pasternack is where to buy your RF generator component for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. |
| 3 | ||
| PE38509 | Pasternack Enterprises | 0 | ||||
| PE3W08509 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Cable Using PE-C195 Coax. PE3W08509 is a TNC male right angle to TNC female bulkhead cable using PE-C195 coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08509 TNC male right angle to TNC female bulkhead cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3W18509 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male to SMA Female Cable Using LMR-195 Coax. PE3W18509 is a TNC male to SMA female cable using LMR-195 coax. This Pasternack TNC male to SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18509 TNC male to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | 1850903 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,950 | ||
| 1850974 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,200 | |||
| 1850932 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 3,750 | |||
| 232-1285-09-0602J | 3m Electronic Products Division | IC Socket, DIP32, 32 Contact(s) | 2,900 | |||
| 1850929 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 1,550 | |||
| 5962-9850901QXB | AMD Xilinx | Field Programmable Gate Array RoHS : Not Compliant | 680 | |||
| 5962-9850901NUC | AMD Xilinx | Field Programmable Gate Array, PBGA352 | 480 | |||
| 17B-850962000163444 | Intel Corporation | 260 | ||||
| 5962-9850901QZX | AMD Xilinx | Field Programmable Gate Array, CQFP228 | 240 | |||
| 5962-9850901QYX | AMD Xilinx | Field Programmable Gate Array, CQFP228 | 230 | |||
| 5962-9850901QXC | AMD Xilinx | Field Programmable Gate Array, 28000 Gates, 143MHz, 2432-Cell, CMOS, CPGA299 | 210 | |||
5962-8850901XC![]() | Analog Devices Inc | D/A Converter, 4 Func, Parallel, Word Input Loading, 4us Settling Time, CDIP28 RoHS : Not Compliant | 120 | |||
5962-8850901XA![]() | Analog Devices Inc | D/A Converter, 4 Func, Parallel, Word Input Loading, 4us Settling Time, CDIP28 RoHS : Not Compliant | 120 | |||
5962-8850901XX![]() | Analog Devices Inc | D/A Converter, 4 Func, Parallel, Word Input Loading, 4us Settling Time, CDIP28 RoHS : Unknown | 110 | |||
| 50C-850959000282252 | Intel Corporation | 85 | ||||
![]() Waytek, Inc. | 131850-91W | General Cable Technologies Corporation | 20GA GXL Pink Cross-Link Automotive Wire XLPE -51C to 125C |
| 19,000 | |
![]() Win Source Electronics | CSD18509Q5B![]() | Texas Instruments | MOSFET N-CH 40V 100A 8VSON RoHS : Compliant |
| 50,650 | |
CSD18509Q5BT![]() | Texas Instruments | MOSFET N-CH 40V 100A 8VSON / Trans MOSFET N-CH Si 40V 100A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 47,110 | ||
| RT8509GQW | Richtek Technology Corp | IC REG BOOST ADJ 3A 10WDFN RoHS : Compliant |
| 10,999 | ||
ADS8509IDW![]() | Texas Instruments | IC ADC 16BIT 250KSPS SRL 20SOIC RoHS : Compliant |
| 2,000 | ||
ADS8509IDWRG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 1,850 | ||
ADS8509IDWR![]() | Texas Instruments | 1-Channel Single ADC SAR 250ksps 16-bit Serial 20-Pin SOIC T/R / IC ADC 16BIT 250KSPS SRL 20-SOIC RoHS : Compliant |
| 1,840 | ||
ADS8509IBDB![]() | Texas Instruments | IC ADC 16BIT 250KSPS SRL 28-SSOP RoHS : Compliant |
| 1,000 | ||
ADS8509IBDBR![]() | Texas Instruments | IC ADC 16BIT SAR 28SSOP / 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 950 | ||
ADS8509IBDBRG4![]() | Texas Instruments | IC ADC 16BIT 250KSPS SRL 28-SSOP RoHS : Compliant |
| 930 | ||
ADS8509IBDBG4![]() | Texas Instruments | IC ADC 16BIT SAR 28SSOP RoHS : Compliant |
| 910 | ||
| PEX8509-AA25BI | Broadcom Limited | IC PCI EXPRESS SWITCH / Switch IC Channel |
| 400 | ||
ADS8509IBDWRG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER | IC ADC 16BIT SAR 20SOIC RoHS : Compliant |
| 360 | ||
ADS8509IBDW![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 328 | ||
ADS8509IBDWR![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 230 | ||
ADS8509IBDWG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER | IC ADC 16BIT SAR 20SOIC RoHS : Compliant |
| 42 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |