 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
854BCNUMNFZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Coilcraft Direct | RA6854-AEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant | 0 | ||
 ComSIT USA | E3023854 | AVAILABLE EU | 188 | |||
| IRF7854TRPBF | Infineon Technologies AG | AVAILABLE EU RoHS : Compliant | 2,870 | |||
| PE65854NLT | Pulse Engineering Inc | AVAILABLE EU | 773 | |||
ComSIT USA | TD62C854AFG5VDELP | Toshiba America Electronic Components | Electronic Component RoHS : Compliant | 90,000 | ||
| TDF8541SDN2S484 | NXP Semiconductors | I2C-BUS CONTROLLED 4 X 45 W POWER AMPLIFIER Audio Amplifier, 44W, 4 Channel(s), 1 Func, BCDMOS, PZFM27 RoHS : Compliant | 17,724 | |||
| MKS185460404PCV0B147S38 | Stocko Contact GmbH & Co Kg | Conn Shrouded Header HDR 4 POS 2.5mm Solder ST Thru-Hole RoHS : Compliant | 3,000 | |||
TS1854IPT | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 3000uV Offset-Max, BIPolar, PDSO14 RoHS : Compliant | 2,500 | |||
MAX6854UK31D3+T | Maxim Integrated Products | Processor Supervisor 3.075V 1 Active Low/Push-Pull 5-Pin SOT-23 T/R RoHS : Compliant | 1,825 | |||
| VSMY9854535 | Vishay Intertechnologies | HIGH POWER INFRARED EMITTING DIODE, 850 NM, SURFACE EMITTER TECHNOLOGY Infrared LED, 2.76mm, 1-Element, 850nm RoHS : Compliant | 600 | |||
IRF7854PBF | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 10A I(D), 80V, 0.0134ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 471 | |||
SCAN18541TSSCX | Fairchild Semiconductor Corporation | NON-INVERTING LINE DRIVER WITH 3-STATE OUTPUTS Boundary Scan Bus Driver, SCAN/JTAG/3J Series, 2-Func, 9-Bit, True Output, CMOS, PDSO56 RoHS : Not Compliant | 377 | |||
| SCAN18541TSSC | Fairchild Semiconductor Corporation | NON-INVERTING LINE DRIVER WITH 3-STATE OUTPUTS Boundary Scan Bus Driver, SCAN/JTAG/3J Series, 2-Func, 9-Bit, True Output, CMOS, PDSO56 RoHS : Not Compliant | 250 | |||
| 16.865.854.756 | Littelfuse Inc | Fuse 7.5A Fast Blow RoHS : Compliant | 100 | |||
AD7854LARS | Analog Devices Inc | 3 V TO 5 V SINGLE SUPPLY, 100 KSPS 12-BIT SAMPLING ADC ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Not Compliant | 92 | |||
| AD8541ARTZ | Analog Devices Inc | GENERAL-PURPOSE CMOS RAIL-TO-RAIL AMPLIFIER Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO5 RoHS : Compliant | 50 | |||
MPC8548CVTAQGD | Freescale Semiconductor | POWERQUICC III INTEGRATED PROCESSOR Microprocessor, 32-Bit, 1000MHz, CMOS, PBGA783 RoHS : Compliant | 15 | |||
| HL8548QERT384VFW55251TR | Sierra Wireless | Wireless communication module, Sierra Wireless, HL series RoHS : Compliant | 6 | |||
| LM10PW3F854 | OSRAM GmbH | Electronic Component RoHS : Not Compliant | 1 | |||
 GLYN GmbH & Co. KG | SGM8544XTS14/TR | SG Micro Corp | 1.1MHz, 46ÿμA, Rail-to-Rail I/O CMOS Operational A RoHS : Compliant | 30 | ||
 NexGen Digital | TLV8544DR | Texas Instruments | RoHS : Compliant | 5,000 | ||
| PIC16F18854T-I/ML | Microchip Technology Inc | RoHS : Compliant | 1,600 | |||
| TMP80C49AP-6-8541 | Toshiba America Electronic Components | 1,500 | ||||
ICS8543BGLF | Integrated Device Technology Inc | RoHS : Compliant | 16 | |||
| 85424-5 | TE Connectivity | RoHS : Compliant | 8 | |||
LTC2854IDD#PBF | Linear Technology | RoHS : Compliant | 6 | |||
 Powell Electronics | 78548-406HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 726 | |
| 5-146285-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 443 | ||
| FJ-20-D-02.85-4 | Samtec Inc | 1.00 mm PCI Express Gen 3 Edge Card Conn RoHS : Compliant |
| 323 | ||
| 78548-218HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 287 | ||
| HTMS-108-54-S-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| 1-356885-4 | TE Connectivity | STOP, SHEAR |
| 122 | ||
| 76385-403LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 122 | ||
| 854525-000 | TE Connectivity | Tinel-Lock RoHS : Compliant |
| 97 | ||
| HTMS-108-54-S-S-SM | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 90 | ||
| 927854-2 | TE Connectivity | Contacts RoHS : Compliant |
| 33 | ||
| 854769-3 | TE Connectivity | Tools |
| 6 | ||
| A85488-000 | TE Connectivity | Connectors |
| 3 | ||
| 88-543954-04W | Amphenol Corporation | RECEPT |
| 2 | ||
| AAC7854-00 | TE Connectivity | backshells, |
| 1 | ||
| 88-543869-35E | Amphenol Corporation | RECEPT |
| 1 | ||
 Richardson RFPD | ADCLK854BCPZ | Analog Devices Inc | Clock Fanout Buffer 12-OUT 2-IN Triple 1:4 48-Pin RoHS : Compliant |
| 48 | |
| R585412230 | Radiall | RF Switch SPDT 0MHz to 18GHz 60dB RoHS : Compliant |
| 0 | ||
| R585452010 | Radiall | DP3T R S18 LS 12 C+D P RoHS : Not Compliant |
| 0 | ||
| 5-146285-4 | TE Connectivity | Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST RoHS : Compliant | 0 | |||
| K854501210PM0C035 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| SI5341B-D08547-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5341B-D08547-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5345A-D08540-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| R585442500 | Radiall | RF Switch SPDT 0MHz to 18GHz 60dB RoHS : Not Compliant |
| 0 | ||
| R585463200 | Radiall | SP2z R S18 LSI 28 D ILP RoHS : Not Compliant |
| 0 | ||
| LTC2854IDD#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 10-Pin D RoHS : Compliant |
| 0 | ||
| LTC3854IMSE#TRPBF | Analog Devices Inc | DC/DC Cntrlr Single-OUT Step Down 440kHz 12-Pin MS RoHS : Compliant |
| 0 | ||
| K854001810PM0C035 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| K854501010PM0C030 | Kendeil srl | ALUM ELECTROLYTC CAP RoHS : Compliant | 0 | |||
| AD7854LARSZ-REEL | Analog Devices Inc | 1-Channel Single ADC SAR 100ksps 12-bit Parallel 2 RoHS : Compliant |
| 0 | ||
 Rutronik | IRF7854TRPBF | Infineon Technologies AG | N-CH 80V 10A 13,4mOhm SO8 RoHS : Compliant |
| 4,000 | |
| OQ0854010000G | Amphenol Interconnect Products Inc | 08P Pluggable_Header SMT 5.08mm Black RoHS : Compliant |
| 2,280 | ||
| 76385-406LF | Amphenol Communications Solutions | 12P SHROUDED HEADER, 2.54mm RoHS : Compliant |
| 2,000 | ||
| SP002290854 | Infineon Technologies AG | IPM CIPOS MICRO 600V 3A DIP23 RoHS : Compliant |
| 15 | ||
| ENW89854AUKF | Panasonic Electronic Components | PAN1780 BLE5.1 NRF52840 Module RoHS : Compliant |
| 4 | ||
| ENW89854ATKF | Panasonic Electronic Components | PAN1780 Wirepas Demo Kit RoHS : Compliant |
| 1 | ||
 Chip 1 Exchange | 770854-1 | TE Connectivity | INSTOCK RoHS : Compliant | 68,883 | ||
| 770854-3 | TE Connectivity | INSTOCK RoHS : Compliant | 38,391 | |||
| B39152-B8854-P810-S05 | Murata Manufacturing Co Ltd | INSTOCK | 3,971 | |||
| AD8541ARTZ-REEL7 | Analog Devices Inc | INSTOCK RoHS : Compliant | 3,089 | |||
| 7126-8854-02 | Yazaki Corp | INSTOCK | 2,000 | |||
| 162.6185.4756 | LIT | INSTOCK | 1,792 | |||
| 02-88548-207 | Sauro srl | INSTOCK | 1,478 | |||
| 02-88548-193 | Sauro srl | INSTOCK | 1,320 | |||
| MC6854S | INSTOCK | 1,208 | ||||
| 185469053 | INSTOCK | 1,131 | ||||
| ST3854DTR-1B | INSTOCK | 1,000 | ||||
| 185416656- | Nichicon Corporation | INSTOCK | 1,000 | |||
| LM4854MT | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 141 | |||
PSD854F2-90M | STMicroelectronics | INSTOCK RoHS : Compliant | 36 | |||
| 85455001- | Amphenol FCi | INSTOCK | 30 | |||
 Avnet Silica | BAT854AW,115 | Nexperia | Diode Schottky 40V 02A 3Pin SC70 TR (Alt: BAT854AW,115) RoHS : Compliant | 201,000 | ||
| BAT854W,115 | Nexperia | Diode Schottky 40V 02A 3Pin SC70 TR (Alt: BAT854W,115) RoHS : Compliant | 9,000 | |||
| TSV854IPT | STMicroelectronics | OP Amp Quad GP RR OP 55V 14Pin TSSOP TR (Alt: TSV854IPT) RoHS : Compliant | 2,500 | |||
TSV854AIYPT | STMicroelectronics | (Alt: TSV854AIYPT) RoHS : Compliant | 2,500 | |||
| BAT854W-QX | Nexperia | (Alt: BAT854W-QX) RoHS : Compliant | 0 | |||
| BAT854SW-QX | Nexperia | (Alt: BAT854SW-QX) RoHS : Compliant | 0 | |||
| ISL85413FRTZ | Renesas Electronics Corporation | (Alt: ISL85413FRTZ) RoHS : Compliant | 0 | |||
| ENW89854A1KF | Panasonic Electronic Components | - Tape and Reel (Alt: ENW89854A1KF) RoHS : Compliant | 0 | |||
| ENW89854AUKF | Panasonic Electronic Components | (Alt: ENW89854AUKF) RoHS : Not Compliant | 0 | |||
| VSC8541XMV-04 | Microchip Technology Inc | (Alt: VSC8541XMV-04) RoHS : Compliant | 0 | |||
| ISL85410DEMO1Z | Renesas Electronics Corporation | (Alt: ISL85410DEMO1Z) RoHS : Compliant | 0 | |||
| ISL85413FRTZ-T | Renesas Electronics Corporation | (Alt: ISL85413FRTZ-T) RoHS : Compliant | 0 | |||
| PC8548EVZGAQGD | Teledyne HiRel | PowerQUICC III Integrated Processor (Alt: PC8548EVZGAQGD) RoHS : Compliant | 0 | |||
| VSC8540XMVET-HP | Microchip Technology Inc | (Alt: VSC8540XMVET-HP) RoHS : Compliant | 0 | |||
| PIC16F18854T-I/MV | Microchip Technology Inc | 7KB FLASH 512B RAM 256B EE 10B ADC2 DAC COMP PWM CWG SMT HLT WWDT SCANCRC ZCD PPS EUSART 2XSPII2 (Alt: PIC16F18854T-I/MV) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | SI8540-B-FWR | Skyworks Solutions Inc | High-side Current Sense Amplifier - (formerly IA2410) RoHS : Compliant |
| 1 | |
| TMJG28541-9AWNL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Shielded EMI Finger, Tab Up, 3Wire+XFMR, Current drive, (G/G), 50u", Industrial grade |
| 0 | ||
| TMJD5854BENL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Vertical, Shielded w/Step, XFMR+CMC, Voltage drive, 30u", (G/Y), Industrial grade |
| 0 | ||
| MA854.K.LBIC.001 | Taoglas Antenna Solutions | Colosseum 4in1 3048mm RG-174 GNSS-SMA(M): TGC-200 LTE(1&2)-SMA(M): TGC-200 WiFi RPSMA (M) |
| 0 | ||
 Chip-Germany GmbH | 285-415 GELB | Wagmer | 22 | |||
 Component Electronics, Inc | FV854ND | Futaba Electric Co Ltd | IN STOCK SHIP TODAY | 2,000 | ||
| 770854-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,622 | ||
| ENW89854A1KF | Panasonic Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 990 | ||
| PE-65854 | Pulse Electronics Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 541 | ||
| 15326854 | Delphi Automotive LLP | IN STOCK SHIP TODAY RoHS : Compliant |
| 46 | ||
| C85A985-4.0M-C | Bliley Technologies Inc | IN STOCK SHIP TODAY | 35 | |||
| 8-541 | Cinch Connectivity Solutions | IN STOCK SHIP TODAY RoHS : Unknown |
| 8 | ||
| XR16C854IJF | Exar Corporation | IN STOCK SHIP TODAY |
| 7 | ||
| AD8541ARTZ-REEL7 | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| CDP1854ACE | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 4 | |||
| 76385-403LF | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 854662 | Sawtek Inc | IN STOCK SHIP TODAY | 2 | |||
| 8542-1000-WHT | IN STOCK SHIP TODAY | 1 | ||||
| M85485/11-16T2A | TE Connectivity | IN STOCK SHIP TODAY |
| 1 | ||
| 5854-1000-9 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | T1185-4CW375 | HeliCoil |
| 1,560 | ||
| 85-45-101-15 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin |
| 148 | ||
| 47-10-508-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-80-608-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| M2185-4007-N | RAF Electronic Hardware | 0 | ||||
| F8548 | Heyco | PG-13 16MM FPA16-PG13/BL | 0 | |||
| T1185-4CW500 | HeliCoil | 0 | ||||
| 1685-440-AL | RAF Electronic Hardware | 0 | ||||
| 1185-4CNY375 | HeliCoil | 0 | ||||
| 1185-4CNY500 | HeliCoil | INS H-C 14-20UNC FR CIN27 | 0 | |||
| 12SWS0854 | Essentra Components | 0 | ||||
| T3585-4CW250S | HeliCoil | H-C 14-20 SL SF TNGL CIN79 | 0 | |||
| 1185-4BN750 | HeliCoil | 0 | ||||
| 1185-4GN250 | HeliCoil | 0 | ||||
| T3585-4CW375S | HeliCoil | 0 | ||||
 ECCO | A85049854W | Amphenol PCD |
| 5 | ||
| M85049/8-54W | Amphenol PCD |
| 5 | |||
 Flip Electronics | LV8549MC-AH | onsemi | Stock, Ship Today RoHS : Compliant |
| 168,690 | |
854105AGLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 99,728 | ||
| IDT854105AGILF | Integrated Device Technology Inc | Stock | 96,071 | |||
85411AMILF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 64,000 | ||
ICS85408BGILF | Integrated Device Technology Inc | Stock RoHS : Compliant | 48,000 | |||
| IDT85411AMLF | Integrated Device Technology Inc | Stock | 30,650 | |||
| IDT8543AG-09LF | Integrated Device Technology Inc | Stock | 15,022 | |||
| MPC8541PXALF | NXP Semiconductors | Stock, Ship Today RoHS : Not Compliant |
| 2,452 | ||
| MPC8548EVTAVHD | NXP Semiconductors | Stock | 2,000 | |||
| 8545BGLF | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 1,506 | ||
| MPC8541ECPXALF | NXP Semiconductors | Stock RoHS : Not Compliant | 1,367 | |||
| MPC8540VT667LC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,039 | ||
| MPC8548VJAUJD | NXP Semiconductors | Stock RoHS : Compliant | 467 | |||
| MPC8547EVJAQGD | NXP Semiconductors | Stock | 146 | |||
| MPC8545VJAQGD | NXP Semiconductors | Stock RoHS : Compliant | 31 | |||
 Maritex | 1658540-4 | TE Connectivity | D-Sub Connectors; 1658540-4; TE CONNECTIVITY; Pin; Yes; Straight; 14.86 mm RoHS : Compliant |
| 101,032 | |
| 1658542-2 | TE Connectivity | D-Sub Connectors; 1658542-2; TE CONNECTIVITY; Socket; Yes; Straight; 13.46 mm RoHS : Compliant |
| 4,865 | ||
| 368544-1 | TE Connectivity | Automotive Connectors; 368544-1; TE CONNECTIVITY; White; 18; 42.291 mm RoHS : Compliant |
| 540 | ||
| IRF7854TRPBF | Infineon Technologies AG | MOSFETs; IRF7854TRPBF; INFINEON TECHNOLOGIES; 80 V; 10 A; 20 V; 2.5 W RoHS : Compliant |
| 39 | ||
| LV8548MC-AH | onsemi | Motor Drivers; LV8548MC-AH; ON SEMICONDUCTOR; 16 V; 1 A; 4 V; 4 RoHS : Compliant |
| 19 | ||
| 163A18549X | Conec Corporation | D-SUB standard; plug; 50-pos.; UNC 4-40; PBT GF UL 94 V-0; 7.5A RoHS : Compliant |
| 16 | ||
AD8542ARMZ-REEL | Analog Devices Inc | Special Purpose Amplifiers; AD8542ARMZ-REEL; ANALOG DEVICES; 8; MSOP; 2.7 V; 5.5 V RoHS : Compliant |
| 4 | ||
| AD8542ARZ-REEL | Analog Devices Inc | Operational Amplifiers; AD8542ARZ-REEL; ANALOG DEVICES; 6 mV; 2; 130 �A; 45 dB RoHS : Compliant |
| 4 | ||
| AD8542ARZ-REEL7 | Analog Devices Inc | Operational Amplifiers; AD8542ARZ-REEL7; ANALOG DEVICES; 6 mV; 8; 5.5 V; 2 RoHS : Compliant |
| 1 | ||
 Pasternack Enterprises US | PE3W06854/HS2-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 48 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 48 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 48 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 48 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-48, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-48 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 48 inch length using LMR-195 coax with double heatshrink. |
| 114 | |
| PE3W17854-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-24 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W10885-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated BNC Male to MCX Plug Low Loss Cable 48 Inch Length Using LMR-195-FR Coax, LF Solder., Radio frequency assembly fire rated BNC male to MCX plug low loss cable 48 inch length using LMR-195-FR coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated BNC male to MCX plug low loss cable 48 inch length using LMR-195-FR coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and MCX cable connection on the other. Our low loss BNC to MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W10885-48 can also be known as a low loss BNC plug to MCX male cable assembly and will be shipped same-day as it is purchased. BNC plug to MCX male cable assembly PE3W10885-48 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency BNC male to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10885-48 can also be used in the other direction and will be MCX plug to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated BNC male to MCX plug low loss cable 48 inch length using LMR-195-FR coax, LF solder. |
| 3 | ||
| PE3C3854-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On MMBX Plug to SMA Male Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to SMA male cable 24 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C3854-24, can also be known as a MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C3854-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3854-24 can also be used in the other direction and will be SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male cable 24 inch length using RG316-DS coax. |
| 0 | ||
| PE3C3854-8 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 8 inches. Snap-On MMBX Plug to SMA Male Cable 8 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to SMA male cable 8 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male cable 8 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C3854-8, can also be known as a MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C3854-8 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3854-8 can also be used in the other direction and will be SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male cable 8 inch length using RG316-DS coax. |
| 0 | ||
| PE3W18549 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using PE-SR405FL Coax. PE3W18549 is a N male right angle to N male right angle cable using PE-SR405FL coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18549 N male right angle to N male right angle cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3485-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Female Cable 48 Inch Length Using PE-SR402FL Coax., Radio frequency assembly N male to N female cable 48 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable 48 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3485-48, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3485-48 is built with PE-SR402FL which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3485-48 can also be used in the other direction and will be type N female to type N male cable assembly if the opposite connectivity is required. N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 48 inch length using PE-SR402FL coax. |
| 0 | ||
| PE3854-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Female Bulkhead Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 48 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3854-48, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3854-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3854-48 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 48 inch length using RG316 coax. |
| 0 | ||
| PE38548/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to C Male Right Angle Cable Using RG393 Coax with 180 Deg. Clock. PE38548/PH180 is a 7/16 DIN male right angle to C male right angle cable using RG393 coax. This Pasternack 7/16 DIN male right angle to C male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm C for connector 2. 7/16 DIN right angle to C right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male C right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38548/PH180 7/16 DIN male right angle to C male right angle cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W14854LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Right Angle 2 Hole Flange to 2.4mm Female Cable Using RG405 Coax with HeatShrink, LF Solder. PE3W14854LF/HS is a BMA jack right angle 2 hole flange to 2.4mm female cable using RG405 coax. This Pasternack BMA jack right angle 2 hole flange to 2.4mm female cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm 2.4mm for connector 2. BMA right angle to 2.4mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack BMA right angle 2 hole flange to female 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14854LF/HS BMA jack right angle 2 hole flange to 2.4mm female cable assembly is constructed with RG405 coax. | 0 | |||
| PE9854B/NF-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 24.5, Beam Width, 3dB H: 23, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 20 dB Gain N Female Input. The PE9854B/NF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/NF-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 24.5 degrees and a horizontal beam width of 23 degrees at 3 dB. This WR-62 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE38546 | Pasternack Enterprises | 0 | ||||
| PE3C2485-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Clamped N Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly clamped N male to TNC male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Clamped N male to TNC male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle TNC cable connection on the other. Our low loss N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2485-48 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2485-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2485-48 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped N male to TNC male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C8549 | Pasternack Enterprises | 0 | ||||
| PE3M0285-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMB, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMB Size 8 D38999 Contact Socket to SMA Male Cable 48 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0285-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMB socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMB to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0285-48 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMB socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMB socket to SMA male cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0285-48 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMB to SMA RF cable are available on our downloadable PDF datasheet. BMB socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMB and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMB to SMA RF cable assembly as per your requirements. |
| 0 | ||
 Waytek, Inc. | 7100163854 | 3M | 22-18 GA #6 Snap Spade VINYL INSULATED TERMINAL |
| 21,634 | |
| 15418546 | Aptiv PLC | 4 Way TPA GT 150 Connector DELPHI 15418546 |
| 6,910 | ||
| 15418547 | Aptiv PLC | 5 Way TPA GT 150 Connector DELPHI 15418547 |
| 6,244 | ||
| 15418545 | Aptiv PLC | 3 Way TPA GT 150 Connector DELPHI 15418545 |
| 1,725 | ||
| 15326854 | Aptiv PLC | GT 150 Series, 12 Way Sealed Male Connector RoHS : Compliant |
| 397 | ||
| 882-854 | Littelfuse Inc | ZCase 2 Way Bus Bar & Studs M8 Nuts Not Included RoHS : Compliant |
| 178 | ||
| 7010398854 | 3M | 3M EPS-300 heat shrink tubing is red polyolefin tubing with a 1/4" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 174 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand