| Electronic Components Datasheet Search |
|
8562G-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | PCF8562TT/2,518![]() | NXP Semiconductors | - Tape and Reel (Alt: PCF8562TT/2,518) RoHS : Compliant |
| 34,000 | |
| RN55E8562BB14 | Vishay Intertechnologies | Through Hole Resistor, 85.6 kohm, RN Series, 100 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RN55E8562BB14) RoHS : Not Compliant |
| 100 | ||
| 2-520856-2 | TE Connectivity | - Tape and Reel (Alt: 2-520856-2) RoHS : Compliant |
| 0 | ||
| RL1218-562-R | Eaton Corporation | - Tape and Reel (Alt: RL1218-562-R) RoHS : Compliant | 0 | |||
| BFC238562182 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 1800 pF, ? 5%, Through Hole, 700 V, 2 kV - Tape and Reel (Alt: BFC238562182) RoHS : Compliant |
| 0 | ||
| MKP385620025JPP4T0 | Vishay Intertechnologies | - Bulk (Alt: MKP385620025JPP4T0) RoHS : Compliant |
| 0 | ||
| Y08562R00000G9W | VPG Foil Resistors | Current Sense Resistor Metal Foil 2Ohm 2% Waffle Pack - Waffle Pack (Alt: Y08562R00000G9W) RoHS : Compliant |
| 0 | ||
| RN55C8562BRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C8562BRE6) RoHS : Not Compliant |
| 0 | ||
| PTN2208H8562BST5 | Vishay Intertechnologies | SMD Chip Resistor, 85.6 kohm, ? 0.1%, 750 mW, 2208 [5819 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN2208H8562BST5) RoHS : Compliant |
| 0 | ||
| RNR60E8562BSM76 | Vishay Intertechnologies | Through Hole Resistor, 85.6 kohm, HDN RNR Series, 125 mW, ? 0.1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RNR60E8562BSM76) RoHS : Not Compliant |
| 0 | ||
| PA5448.562NLT | Pulse Electronics Corporation | - Tape and Reel (Alt: PA5448.562NLT) RoHS : Compliant |
| 0 | ||
| PATT0603H8562BGT1 | Vishay Intertechnologies | SMD Chip Resistor, 85.6 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PATT Series - Tape and Reel (Alt: PATT0603H8562BGT1) RoHS : Compliant |
| 0 | ||
| CF1008-562KS | Gowanda Electronics Corporation | FERRITE CHIP INDUCTOR - Tape and Reel (Alt: CF1008-562KS) RoHS : Compliant | 0 | |||
| MAL205856222E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 2200 uF, 25 V, ? 20%, Snap-In - Boxed Product (Development Kits) (Alt: MAL205856222E3) RoHS : Compliant |
| 0 | ||
| PTN1206H8562BST1 | Vishay Intertechnologies | SMD Chip Resistor, 85.6 kohm, ? 0.1%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN1206H8562BST1) RoHS : Compliant |
| 0 | ||
![]() Newark | PCF8562TT/2,518![]() | NXP Semiconductors | Lcd Driver, Aec-Q100, -40 To 85Deg C; |NXP Semiconductors PCF8562TT/2,518 RoHS : Compliant |
| 3,876 | |
PCF8562TT/2,518![]() | NXP Semiconductors | Lcd Driver, Aec-Q100, -40 To 85Deg C; |NXP Semiconductors PCF8562TT/2,518 RoHS : Compliant |
| 3,876 | ||
| RN73H1JTTD8562B25 | KOA Speer Electronics Inc | Resistor, 85K6, 75V, 0.1W, Thin Film; |Koa RN73H1JTTD8562B25 RoHS : Not Compliant |
| 1,630 | ||
| RN73H1JTTD8562B25 | KOA Speer Electronics Inc | Resistor, 85K6, 75V, 0.1W, Thin Film; |Koa RN73H1JTTD8562B25 RoHS : Not Compliant |
| 1,630 | ||
| 2-520856-2 | TE Connectivity | Quick Dis Term, Female, 6.35 X 0.81Mm; |Te Connectivity Amp 2-520856-2 RoHS : Compliant |
| 1,115 | ||
| 1-968562-2 | TE Connectivity | Automotive Housing, Rcpt, 10Pos, Black; |Te Connectivity 1-968562-2 RoHS : Compliant |
| 800 | ||
| MAL205856223E3 | Vishay Intertechnologies | Cap, 22000?f, 25V, Alu Elec, Snap In; |Vishay MAL205856223E3 RoHS : Compliant |
| 374 | ||
| 282856-2 | TE Connectivity | Tb, Wire To Brd, R/A, 2Way, 12Awg; |Te Connectivity Buchanan 282856-2 RoHS : Compliant |
| 299 | ||
| QSH5718-56-28-126 | Analog Devices Inc | Stepper Motor, 2-Ph, 2.8A, 1.26N-M; |Trinamic/analog Devices QSH5718-56-28-126 RoHS : Compliant |
| 26 | ||
| 8562B-6501 | Eaton Cutler-Hammer | Output Device, ss Relay,50 Series,115Vac; |Eaton Cutler Hammer 8562B-6501 RoHS : Not Compliant |
| 14 | ||
| 282856-2 | TE Connectivity | Termi-Blok Pcb Mount 2P Rohs Compliant: Yes |Te Connectivity Buchanan 282856-2 RoHS : Compliant |
| 6 | ||
| 785622-01 | NI | Controller, Compactrio, Crio-9042; |Ni/emerson 785622-01 RoHS : Compliant |
| 2 | ||
| QSH6018-56-28-165 | Analog Devices Inc | Stepper Motor, 4-Ph, 2.8A, 1.65N-M; |Trinamic/analog Devices QSH6018-56-28-165 RoHS : Compliant |
| 2 | ||
| 785626-01 | NI | Test Cable Assembly, Power Cable, 250V; |Ni/emerson 785626-01 RoHS : Compliant |
| 1 | ||
| DR0608-562L | Coilcraft Inc | Inductor, 5.6Uh, 4.6A, 20%, Power; |Coilcraft DR0608-562L RoHS : Compliant |
| 1 | ||
![]() RS | SI-QM-SMFA (48562) | Banner Engineering Corp | SWITCH ACTUATOR, METAL ACTUATOR, FLEXIBLE, FOR DOORS OR COVERS |
| 61 | |
| 2450856 (25530155) (CLNI20370-100RS) | RS Pro | 3/8-16 REVERSIBLE 2-WAY LOCK NUT STEEL ZINC PLATED |
| 16 | ||
| BSF-4856-24 (BSF485624) | Isostatic Industries Inc | FLANGE BEARING, 1.504 X 1.755 X 1-1/2 X 2 X 3/16IN, POWDERED METAL BRONZE |
| 10 | ||
| 2452856 (25530293) (FWTUI80251-100RS) | RS Pro | 1/4" .072 THICK USS GRADE 8 FLAT WASHER ZINC YELLOW PLATED |
| 5 | ||
| 2451856 (25531415) (MPPI0-500310-100RS) | RS Pro | SCREW, #5-40 X 5/16 PHILLIPS PAN MACHINE, ZINC PLATED |
| 4 | ||
| 4885625 | RS Pro | POLISHING COMPOUND STEELWHITE-BLUE |
| 3 | ||
| SF-4856-24 (402128) | Isostatic Industries Inc | FLANGE BEARING, 1.503 X 1.752 X 1-1/2 X 2 X 3/32IN, POWDERED METAL BRONZE |
| 3 | ||
| 278562 | RS Pro | BRASS PUSH IN EXPANSION INSERT M5 FLUSH |
| 2 | ||
| 2856265 (PT PE/S+1X2-BE) | Phoenix Contact | PT PE/S+1X2-BE |
| 2 | ||
| 1SNA168562R0300 (016856203) | TE Connectivity | FUSE 1/4X11/4 16A, ENTRELEC |
| 2 | ||
| M1125002.00 (985.627H) | Leeson | DC GEARMOTOR, ...60:1.30RPM.100LBIN.1/17HP.30...DC GEARMOTORS.90V..TENV.985.627 |
| 1 | ||
| 2708562 (PSI-MOS-RS485W2/FO1300 E) | Phoenix Contact | TERMINATION DEVICE WITH AN FO INTERFACE, 1300 NM, FOR GLASS FIBER CABLE |
| 1 | ||
| 2453856 (25533076) (HCI502506000-050RS) | RS Pro | 1/4-20 X 6 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, COARSE |
| 1 | ||
| 8562 | Dichtomatik | O-RING, 23,00 2,50 90 NBR NB9027 |
| 0 | ||
| CA2-B0-24-685-622-E (CA2B024685622E | CA2-B0-24-685-622-E | CA2B024685622E) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() Microchip Technology Inc | DSC1123AI5-185.6250 | Microchip Technology Inc | MEMS OSC, LVDS, 185.625MHz, 10PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-09-12 RoHS : Compliant |
| 10,252 | |
| DSC1123AI5-185.6250T | Microchip Technology Inc | MEMS OSC, LVDS, 185.625MHz, 10PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-09-12 RoHS : Compliant |
| 10,252 | ||
| PM8562B-F3EI | Microchip Technology Inc | PFX-L 32xG3, BBGA, Projected EOL: 2046-01-23 RoHS : Compliant |
| 1,840 | ||
| VSC8562XKS-14 | Microchip Technology Inc | 2 Port GbE Cu/Fiber PHY with (Q)SGMII & MACsec (Ind. Temp), PBGA, Projected EOL: 2046-10-19 RoHS : Compliant |
| 0 | ||
| VSC8562XKS-11 | Microchip Technology Inc | 2 Port GbE Cu/Fiber PHY with (Q)SGMII & MACsec, PBGA, Projected EOL: 2046-10-19 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 5856-2 | Misc Wire Cable Tubing Sleeve | 5,000 | |||
| 5602-285-62 | Seastrom Mfg | 3,000 | ||||
| 9908-562 | Bivar Inc | RoHS : Compliant | 400 | |||
| 5613-85-62 | Seastrom Mfg | 100 | ||||
| A3-85-625-12 | Southco | 57 | ||||
| OL8562BPG | MISCELLANEOUS | 40 | ||||
| 114118-.562-SS | Accurate Screw Machine | 18 | ||||
![]() Rochester Electronics | PCF8562TT/S400/2,5![]() | NXP Semiconductors | Display Drivers and Controller LCD 32 Segment I²C 48-SOP T/R RoHS : Compliant |
| 1,975 | |
| LM8562-E | onsemi | Digital Alarm Clock 28-DIP RoHS : Compliant |
| 100,357 | ||
| LV88562JA-AH | onsemi | Motor Driver ICs Controller - Speed 50mA 20-SOP T/R RoHS : Compliant |
| 5,999 | ||
| LV88562RTXG | onsemi | Motor Driver ICs Controller - Speed 50mA 20-QFN T/R RoHS : Compliant |
| 11,999 | ||
DAC8562FRU![]() | Analog Devices Inc | D/A Converter RoHS : Not Compliant |
| 1,328 | ||
DAC8562FP![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDIP20 RoHS : Not Compliant |
| 8,401 | ||
DAC8562FSZ![]() | Analog Devices Inc | IC DAC 1 CONV 12Bits R-2R Parallel 20-SOIC Tube RoHS : Compliant |
| 674 | ||
DAC8562FS![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDSO20 RoHS : Not Compliant |
| 3,944 | ||
DAC8562FPZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDIP20 RoHS : Compliant |
| 727 | ||
DAC8562EP![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDIP20 RoHS : Not Compliant |
| 3,602 | ||
DAC8562FRUZ![]() | Analog Devices Inc | D/A Converter RoHS : Compliant |
| 6,433 | ||
DAC8562TDSCT![]() | Texas Instruments | IC DAC 2 CONV 16Bits String DAC 3-Wire Serial, DSP, MICROWIRE, QSPI, SPI 10-SON T/R RoHS : Compliant |
| 39 | ||
| BCM85622IFSBG | MaxLinear Inc | 1024 QAM, w/o NP |
| 2,286 | ||
| BCM85622WIFSBG | MaxLinear Inc | System on Chip (SoC) RoHS : Compliant |
| 658 | ||
| BCM85626IFSBG | MaxLinear Inc | System on Chip (SoC) RoHS : Compliant |
| 2,068 | ||
![]() Sager | 2-520856-2 | TE Connectivity | Terminals .25 ULTRA-FAST FLG Reel of 1700 RoHS : Compliant |
| 0 | |
| 1718562011 | Molex | KK RPC 100 HDR FRLK VERT 11 CKT 30AU RoHS : Compliant |
| 0 | ||
| 2856265 | Phoenix Contact | Surge Suppressors PT PE/S+1X2-BE RoHS : Compliant |
| 0 | ||
| RL1218-562-R | Eaton Bussmann | RF Inductors - Leaded 5600uH .418A | 0 | |||
| 0459856261 | Molex | Heavy Duty Power Connectors LPH Plug Assy RtAn 06 Pwr 32 Sig Guides RoHS : Compliant |
| 0 | ||
| 0713085620 | Molex | Headers & Wire Housings CGrid SMT Bkwy Hdr Tin 20Ckt TubewVC | 0 | |||
| 0459856282 | Molex | Heavy Duty Power Connectors LPH Plug Assy RtAn 06 Pwr 40 Sig Guides RoHS : Compliant |
| 0 | ||
| 0459856251 | Molex | Heavy Duty Power Connectors LPH Plug Assy RtAn 06 Pwr 28 Sig Guides RoHS : Compliant |
| 0 | ||
| P7-856229 | OTTO Engineering Inc | Basic / Snap Action Switches | 0 | |||
| 856284-2 | TE Connectivity | Other Tools HORZ WIRE STAIGHTENER ASSY | 0 | |||
| 2488562-1 | TE Connectivity | CONN G SNA 5015 SHELL 8 1PK RoHS : Compliant |
| 0 | ||
| 0082285624 | Molex | Flat Cables | 0 | |||
| 1718562 | Phoenix Contact | Pluggable Terminal Blocks 10 Pos 7.62mm pitch Plug 24-8 AWG Spring RoHS : Compliant |
| 0 | ||
| 856240-2 | TE Connectivity | Circular MIL Spec Tools, Hardware & Accessories COVER PLUG | 0 | |||
| 7-2837856-2 | TE Connectivity | TE Connectivity OCEAN-2.0-APPLICATOR-S-158F206F | 0 | |||
![]() TME | 1-968562-2 | TE Connectivity | Connector: automotive; socket; female; Automotive; 7.5A; PIN: 10 RoHS : Compliant |
| 12,000 | |
| 1158562 | Bossard Group | Screw; M3; M3x25; 0.5; Head: countersunk; Phillips; PH1; steel; zinc |
| 1,000 | ||
| 282856-2 | TE Connectivity | Connector: PCB terminal block; power supply; 24A; 300V; PIN: 2 RoHS : Compliant |
| 900 | ||
| 1648562-1 | TE Connectivity | Connector: wire-wire; plug; Automotive; black |
| 144 | ||
| 11856250 | RAPID | Staples; 6mm; 5000pcs; TYP 53 |
| 34 | ||
| 08-562 | NEO TOOLS | Reduction; Size: 1/4"M,3/8"F |
| 4 | ||
| 7000-89721-5856200 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M8 male straight,RJ45 plug; 62m; 60VDC |
| 0 | ||
| 1285622 | Phoenix Contact | EMobility: cable; 1x0.5mm2,5x4mm2; 400VAC; 26.6kW; IP54; 5m; 32A |
| 0 | ||
| 1885620000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 12A; 300V RoHS : Compliant |
| 0 | ||
| B32642B8562J289 | TDK Corporation | Capacitor: polypropylene; 5.6nF; 2000VDC; 500VAC; 18x11x6mm; THT RoHS : Compliant |
| 0 | ||
| SLW-158562-5A-RA-N-D | Same Sky | Switch: slide; Pos: 2; DPDT; 0.3A/50VDC; ON-ON; THT; 15.1x6.2x6.3mm RoHS : Compliant |
| 0 | ||
| 1818562 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON S RoHS : Compliant |
| 0 | ||
| 1718562 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 32A; 1kV RoHS : Compliant |
| 0 | ||
| 2856200000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 15A; 500V; push-in; wemid; L: 53mm; W: 3.5mm RoHS : Compliant |
| 0 | ||
| 2856210000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 15A; 500V; push-in; wemid; L: 53mm; W: 3.5mm RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | DAC8562FS![]() | Analog Devices Inc | PLUS 5 VOLT, PARALLEL INPUT COMPLETE 12-BIT DAC D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDSO20 RoHS : Not Compliant | 858 | ||
DAC8562FPZ![]() | Analog Devices Inc | +5 VOLT, PARALLEL INPUT COMPLETE 12-BIT DAC D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDIP20 RoHS : Compliant | 20 | |||
![]() Interstate Connecting Components | 2-520856-2 | TE Connectivity | CUT STRIP - 250 ULTRA-FAS T FLAG 22-18 TPBR RoHS : Compliant |
| 0 | |
| 158562-0084 | Glenair Inc | Glenair | 0 | |||
| 057-8562-432 | ITT Interconnect Solutions | 057-8562-432 | 0 | |||
| 2488562-1 | TE Connectivity | CONN G SNA 5015 SHELL 8 1PK RoHS : Compliant | 0 | |||
| 011-8562-000 | ITT Interconnect Solutions | 011-8562-000 | 0 | |||
| 88-562489-02P | Amphenol Aerospace | RECEPT 88-562489-02P | 0 | |||
| 057-8562-532 | ITT Interconnect Solutions | 057-8562-532 | 0 | |||
| 044-8562-000 | ITT Interconnect Solutions | 044-8562-000 | 0 | |||
| 058-8562-010 | ITT Interconnect Solutions | 058-8562-010 | 0 | |||
| 044-8562-010 | ITT Interconnect Solutions | 044-8562-010 | 0 | |||
| 88-562710-51S | Amphenol Aerospace | RECEPT 88-562710-51S | 0 | |||
| 158562-0032 | Glenair Inc | D54 - CONNECTOR, ACCESS | 0 | |||
| 019-8562-000 | ITT Interconnect Solutions | 019-8562-000 | 0 | |||
| 057-8562-130 | ITT Interconnect Solutions | 057-8562-130 | 0 | |||
| 101-8562-000 | ITT Interconnect Solutions | 101-8562-000 | 0 | |||
![]() PEI Genesis | 158562-0002 | SOURIAU-SUNBANK |
| 0 | ||
| 158562-0084 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0023 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0104 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0074 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0099 | SOURIAU-SUNBANK |
| 0 | |||
| 333F385-6-250 | HellermannTyton |
| 0 | |||
| 158562-0021 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0102 | SOURIAU-SUNBANK |
| 0 | |||
| 50-628-5626-899 | ITT Interconnect Solutions |
| 0 | |||
| 158562-0018 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0225 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0075 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0032 | SOURIAU-SUNBANK |
| 0 | |||
| 158562-0113 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 2-520856-2 | TE Connectivity | TE COMPONENT (REF 2-520856-2) RoHS : Compliant |
| 16,830 | |
| 8-34856-2 | TE Connectivity | Terminals RoHS : Compliant |
| 560 | ||
| 1648562-1 | TE Connectivity | Power Connectors |
| 95 | ||
| 1928562-1 | TE Connectivity | Connectors |
| 61 | ||
| 71-185620-26S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 8 | ||
| 856265-1 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 5 | ||
| 71-185622-55P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 3 | ||
| 85626-B00000130-13 | Honeywell Sensing and Control | Switch |
| 3 | ||
| 72-185620-16P | Amphenol Corporation | MIL-C 26482 SERIES I CONNECTOR |
| 2 | ||
| 1-856265-7 | TE Connectivity | ANVIL, COMBINATION |
| 2 | ||
| 88-562710-51G | Amphenol Corporation | CONNECTOR |
| 1 | ||
| 1-856265-4 | TE Connectivity | ANVIL, COMBINATION |
| 1 | ||
| 88-562710-51H | Amphenol Corporation | CONNECTOR |
| 1 | ||
| ZPF000000000008562 | TE Connectivity | CONNECTOR (TE INTERNAL REF, MFR PN N/A) RoHS : Compliant |
| 1 | ||
| 856265-5 | TE Connectivity | ANVIL, COMBINATION |
| 1 | ||
![]() PUI | 12.88562 | 5,370 | ||||
| 12.85629 | 4,005 | |||||
| 2012-1X02G00S-2.8-5.6-21. | 2,997 | |||||
| 12.85620 | 2,918 | |||||
| 12.85623 | 1,010 | |||||
| 12.85624 | 20 | |||||
| 12.85628 | 10 | |||||
![]() Richardson RFPD | DAC8562FSZ![]() | Analog Devices Inc | DAC 1-CH R-2R 12-bit 20-Pin SOIC W Tube RoHS : Compliant |
| 6 | |
| RL1218-562-R | Eaton Corporation | Unshielded Radial Leaded Drum Core Inductor RoHS : Compliant | 0 | |||
| VSC8562XKS-11 | Microchip Technology Inc | PHY 2-CH 10Mbps/100Mbps/1Gbps 1V/1.2V/2.5V 256-Pin RoHS : Compliant |
| 0 | ||
| SI5345B-D08562-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
DAC8562FSZ-REEL![]() | Analog Devices Inc | DAC 1-CH R-2R 12-bit 20-Pin SOIC W T/R RoHS : Compliant |
| 0 | ||
| 3685627 | Wakefield-Vette | THERMAL HARDWARE RoHS : Compliant |
| 0 | ||
| 935318562557 | NXP Semiconductors | Power Management IC 2.8V/3.7V to 4.5V/5.5V Medical RoHS : Compliant | 0 | |||
| VSC8562XKS-14 | Microchip Technology Inc | PHY 2-CH 10Mbps/100Mbps/1Gbps 1V/1.2V/2.5V 256-Pin RoHS : Compliant |
| 0 | ||
| 3685626 | Wakefield-Vette | THERMAL HARDWARE RoHS : Compliant |
| 0 | ||
| 4-68-562-002REVA | Custom Cable Inc | RF CUSTOM CABLE ASSY RoHS : Compliant | 0 | |||
| 4-68-562-002REV1 | Custom Cable Inc | RF CUSTOM CABLE ASSY RoHS : Compliant | 0 | |||
DAC8562FPZ![]() | Analog Devices Inc | DAC 1-CH R-2R 12-bit 20-Pin PDIP N Tube RoHS : Compliant |
| 0 | ||
| 082-856-2050 | Amphenol Corporation | Conn HN 0Hz to 4GHz 50Ohm Solder RA Cable Mount PL RoHS : Compliant |
| 0 | ||
| SI5345B-D08562-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 925856-2 | TE Connectivity | INSTOCK RoHS : Compliant | 156,000 | ||
| 5-1924856-2 | TE Connectivity | INSTOCK RoHS : Compliant | 48,543 | |||
| 14478562608 | Lear Corporation | INSTOCK | 43,485 | |||
| 12.85628 | Geyer Electronic E K | INSTOCK | 10,005 | |||
| 12.88562 | Geyer Electronic E K | INSTOCK | 5,370 | |||
| 12.85629 | Geyer Electronic E K | INSTOCK | 3,005 | |||
| 12.8562 | Geyer Electronic E K | INSTOCK | 2,918 | |||
| 1-282856-2 | TE Connectivity | INSTOCK RoHS : Compliant | 2,319 | |||
| 12.85623 | Geyer Electronic E K | INSTOCK | 1,010 | |||
| 14708.562.621 | INSTOCK | 88 | ||||
| 12.85624 | Geyer Electronic E K | INSTOCK | 20 | |||
![]() Avnet Abacus | 1-968562-2 | TE Connectivity | Automotive Connector Housing Black MQS Receptacle 10 Ways (Alt: 1-968562-2) RoHS : Compliant | 16,000 | ||
| 1718562 | Phoenix Contact | SPC 510STCL762 SPC510STCL762 (Alt: 1718562) RoHS : Compliant | 0 | |||
| 459856212 | Molex | (Alt: 459856212) RoHS : Compliant | 0 | |||
| H8562RBDA | TE Connectivity | Res Metal Film 562 Ohm 01 14W 25ppmC Conformal AXL ThruHole Bandoliered (Alt: 7-1879673-0) RoHS : Compliant | 0 | |||
| 2488562-1 | TE Connectivity | Conn G SNA 5015 Shell 8 1pk (Alt: 2488562-1) RoHS : Compliant | 0 | |||
| 459856272 | Molex | (Alt: 459856272) RoHS : Compliant | 0 | |||
| 459856243 | Molex | (Alt: 459856243) RoHS : Compliant | 0 | |||
| 459856231 | Molex | (Alt: 459856231) RoHS : Compliant | 0 | |||
| 2-520856-2 | TE Connectivity | Flag Terminal 1822AWG RCP 1689mm 16mm Tin Strip (Alt: 2-520856-2) RoHS : Compliant | 0 | |||
| 2-520856-2 | TE Connectivity | Flag Terminal 1822AWG RCP 1689mm 16mm Tin Strip (Alt: 2-520856-2) RoHS : Compliant | 0 | |||
| 1-5164856-2 | TE Connectivity | Conn Wire to Board PL 12 POS 5mm Solder ST ThruHole (Alt: 1-5164856-2) RoHS : Compliant | 0 | |||
| BFC237448562 | Vishay Intertechnologies | VISBFC237448562 (Alt: BFC237448562) RoHS : Compliant | 0 | |||
| MAL205856222E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 2200 uF 25 V 20 SnapIn (Alt: MAL205856222E3) RoHS : Compliant | 0 | |||
| RN73H1ETTP8562F50 | KOA Speer Electronics Inc | SMD Chip Resistor 856 kohm 1 625 mW 0402 1005 Metric Metal Film Thin Film - Tape and Reel (Alt: RN73H1ETTP8562F50) RoHS : Compliant | 0 | |||
| MKP385620025JPP4T0 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 4 Pin 20 uF 5 Through Hole 160 V 250 V (Alt: MKP385620025JPP4T0) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BC856,215![]() | Nexperia | Trans GP BJT PNP 65V 0.1A 3-Pin TO-236AB T/R (Alt: BC856,215) RoHS : Compliant | 0 | ||
| B32672L8562J289 | TDK Corporation | (Alt: B32672L8562J289) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BC856,215![]() | Nexperia | Trans GP BJT PNP 65V 01A 3Pin TO236AB TR (Alt: BC856,215) RoHS : Compliant | 276,000 | ||
| OS85623 | Microchip Technology Inc | Video Companion Device 196Pin BGA (Alt: OS85623) RoHS : Compliant | 0 | |||
| PM8562B-F3EI | Microchip Technology Inc | (Alt: PM8562B-F3EI) RoHS : Compliant | 0 | |||
| VSC8562XKS-11 | Microchip Technology Inc | (Alt: VSC8562XKS-11) RoHS : Compliant | 0 | |||
| VSC8562XKS-14 | Microchip Technology Inc | (Alt: VSC8562XKS-14) RoHS : Compliant | 0 | |||
PCF8562TT/2,518![]() | NXP Semiconductors | LCD DRVR 16DIGIT 25V33V5V 48Pin TSSOP TR (Alt: PCF8562TT/2,518) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RMC18-562RFT | Kamaya Inc | IN STOCK SHIP TODAY |
| 7,000 | |
| RMC18-5621FT | Kamaya Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
| RMC1/8-562R-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| RMC1/8-562K-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,950 | ||
| RMCF1/8-56.2R-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,925 | ||
| RMC1/8-562JT | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,700 | ||
| RMC1/8-5621FT | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,500 | ||
| RMC1/8-5621F | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,500 | ||
| RMCF-1/8-56.2R-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 400 | ||
| 8-34856-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 40 | ||
| LPS3008-562MLB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 39 | ||
| SCN68562C4A52 | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant | 6 | |||
| 5945-856-2404 | Allied Controls Incorporated | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 498562 | Essentra Components | 20MM DIA ROUND GLIDE W M8 THRE | 0 | ||
| 3BT-P8562-00 | Acumnet / Camcar | D-PT 16-0.64 X 3MM TXP F/T PH | 0 | |||
| 8562-4 | HeliCoil | 0 | ||||
| A3-85-625-12 | Southco | 0 | ||||
| 8562-5 | HeliCoil | 0 | ||||
| M8562 | Heyco | 0 | ||||
| 22SPC38562B | Essentra Components | HALF U CLIP, ADHESIVE, .375 HO | 0 | |||
| 22SPC38562 | Essentra Components | HALF U CLIP, ADHESIVE, .375 HO | 0 | |||
![]() EBV Elektronik | PM8562B-F3EI | Microchip Technology Inc | (Alt: PM8562B-F3EI) RoHS : Compliant | 0 | ||
| VSC8562XKS-11 | Microchip Technology Inc | (Alt: VSC8562XKS-11) RoHS : Compliant | 0 | |||
| BCM85620IFSBG | Broadcom Limited | (Alt: BCM85620IFSBG) RoHS : Compliant | 0 | |||
| BCM85620WIFSBG | Broadcom Limited | (Alt: BCM85620WIFSBG) RoHS : Compliant | 0 | |||
PCF8562TT/2,518![]() | NXP Semiconductors | LCD DRVR 16DIGIT 25V33V5V 48Pin TSSOP TR (Alt: PCF8562TT/2,518) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LV88562JA-AH | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | |
| LV88562RTXG | onsemi | Stock RoHS : Compliant | 2,000 | |||
![]() Maritex | 2-520856-2 | TE Connectivity | Quick Connect, Disconnect Terminals; 2-520856-2; TE CONNECTIVITY; Brass; Insulated; Tin; 6.35 mm RoHS : Compliant |
| 18,400 | |
![]() Master Electronics | 2-520856-2 | TE Connectivity | ULTRA-FAST 250 ASY REC 22-18 TPBR RoHS : Compliant |
| 88,400 | |
| 2856265 | Phoenix Contact | Base element for protective plug PT with surge voltage device protection for the power supply unit and one 2-wire floating signal circuit - mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm RoHS : Compliant |
| 0 | ||
| 2110856-2 | TE Connectivity | Dbl Row Barrier Strip .437 B Hd Sw Kit RoHS : Compliant |
| 0 | ||
| VSC8562XKS-11 | Microchip Technology Inc | Dual Port QSGMII/SGMII Dual Media GbE PHY with Intellisec - 256-PBGA (17x17) - Surface Mount. RoHS : Compliant |
| 0 | ||
| H8562RBDA | TE Connectivity | H8 562R 0.1% 25PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| 2488562-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 1718562 | Phoenix Contact | PCB connector - nominal current: 41 A - rated voltage (III/2): 1000 V - nominal cross section: 6 mm² - number of positions: 10 - pitch: 7.62 mm - connection method: Push-in spring connection - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| DSC1123AI5-185.6250T | Microchip Technology Inc | MEMS OSC LVDS 185.625MHz 10PPM 2.5-3.3V -40 to 85C 7.0 RoHS : Compliant |
| 0 | ||
| 856240-2 | TE Connectivity | COVER PLUG RoHS : Not Compliant |
| 0 | ||
| 856232-000 | TE Connectivity | TX54AB00-2808J MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ECW-H8562HV | Panasonic Electronic Components | Cap Film 0.0056uF 800V PP 3%( 18 X 6.5 X 13.5mm) Radial 15mm 105°C Bulk RoHS : Compliant |
| 0 | ||
| ECW-H8562HVB | Panasonic Electronic Components | Cap Film 0.0056uF 800V PP 3%( 18 X 6.5 X 18.5mm) Radial 10mm 105°C Bulk RoHS : Compliant |
| 0 | ||
| 0578562150 | ITT Interconnect Solutions | D-Sub Standard Connectors RoHS : Compliant |
| 0 | ||
| 016856203 | TE Connectivity | ABB-CONNECTION - SNA SERIES ACCESSORIES RoHS : Compliant |
| 0 | ||
| CA2-B0-24-685-622-E | Carling Technologies | CA2B024685622E RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17856-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Female Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856-24 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856-24 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | |
| PE3C9856-24 | Pasternack Enterprises | Key Specifications. Connector 1 Series BNC Connector 1 Gender Plug Connector Angle 1 Straight Connector 1 Impedance 50 Ohm Connector 2 Series BNC Connector 2 Gender Plug Connector Angle 2 Straight Connector 2 Impedance 50 Ohm Connector 1 Body Material Bronze Connector 1 Body Plating Copper-Tin-Zinc Alloy RF Cable Part Number RG58C/U RF Cable Impedance 50 Ohm Length, Max 24 inches . BNC Plug to BNC Plug using RG58 Coax Cable in 24 Inches., Pasternack's PE3C9856-24 BNC plug to BNC plug 24 inch cable using RG58 is part of our full line of RF components available for same-day shipping. This Pasternack BNC to BNC cable assembly has a plug to plug gender configuration with 50 ohm. The PE3C9856-24 BNC plug to BNC plug cable assembly operates to 4 GHz. Custom versions of most RF cable assemblies can be built and shipped same day. Custom cable assembly lengths can be obtained by specifying the desired length on the web site at time of order or by contacting a sales representative. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. |
| 0 | ||
| PE3C10856-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-24 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-24 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-24 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02856-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to Reverse Polarity SMA Plug Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to reverse polarity SMA plug low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to reverse polarity SMA plug low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and reverse polarity a SMA cable connection on the other. Our low loss a SMA to reverse polarity a SMA cable assembly has male gender on end 1 and plug on end 2. PE3W02856-24 can also be known as a low loss SMA plug to reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02856-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity SMA male cable assembly PE3W02856-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02856-24 can also be used in the other direction and will be reverse polarity SMA plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE38562 | Pasternack Enterprises | 0 | ||||
| PE34856-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. FME Jack to FME Jack Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly FME jack to FME jack cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to FME jack cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a jack gender on end 1 and jack on end 2. This FME to FME cable is a jack to jack coax assembly, PE34856-24, can also be known as a FME female to FME female cable assembly and will be shipped same-day as it is purchased. FME female to FME female cable assembly PE34856-24 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to FME jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME female to FME female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to FME jack cable 24 inch length using RG58 coax. |
| 0 | ||
| PE3W18562 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Female Bulkhead to UHF Male Cable Using LMR-600 Coax. PE3W18562 is a N female bulkhead to UHF male cable using LMR-600 coax. This Pasternack N female bulkhead to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our female N bulkhead to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18562 N female bulkhead to UHF male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C7856-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 24 inches. 2.2-5 Male to 2.2-5 Male Low PIM Cable 24 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 2.2-5 male low PIM cable 24 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 2.2-5 male low PIM cable 24 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 2.2-5 cable connection on the other. Our low PIM 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7856-24, can also be known as a low PIM 2.2-5 plug to 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7856-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 2.2-5 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 plug to 2.2-5 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 2.2-5 male low PIM cable 24 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8562 | Pasternack Enterprises | 0 | ||||
| PE3W08562 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using PE-C195 Coax. PE3W08562 is a TNC male to SMA male cable using PE-C195 coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08562 TNC male to SMA male cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3W02856-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to Reverse Polarity SMA Plug Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to reverse polarity SMA plug low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to reverse polarity SMA plug low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and reverse polarity a SMA cable connection on the other. Our low loss a SMA to reverse polarity a SMA cable assembly has male gender on end 1 and plug on end 2. PE3W02856-200CM can also be known as a low loss SMA plug to reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02856-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity SMA male cable assembly PE3W02856-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02856-200CM can also be used in the other direction and will be reverse polarity SMA plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18562LF | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. UHF Male to N Female Bulkhead Cable Using LMR-600 Coax, LF Solder. PE3W18562LF is a UHF male to N female bulkhead cable using LMR-600 coax. This Pasternack UHF male to N female bulkhead cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18562LF UHF male to N female bulkhead cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE9856-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz, Beam Width V: 16.1, Beam Width H: 16.5. WR-90 Waveguide Standard Gain Horn Antenna Operating from 8.2 GHz to 12.4 GHz with a Nominal 20 dBi Gain with UG-135/U Square Cover Flange. Pasternack’s PE9856-20 WR-90 waveguide horn is also known as a waveguide horn antenna. This WR-90 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 8.2 to 12.4 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 10.06 inches, a width of 5 inches, and a weight of 0.9 lbs. Our WR-90 waveguide horn antenna has a typical vertical beam width of 16.1 degrees and a horizontal beam width of 16.5 degrees at 3 dB. Our antenna comes with a UG-135/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-90 standard gain horn antenna has an anodized aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-90 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3C7856-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 2.2-5 Male to 2.2-5 Male Low PIM Cable 200 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 2.2-5 male low PIM cable 200 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 2.2-5 male low PIM cable 200 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 2.2-5 cable connection on the other. Our low PIM 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 2.2-5 cable is a male to male coax assembly, PE3C7856-200CM, can also be known as a low PIM 2.2-5 plug to 2.2-5 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 plug cable assembly PE3C7856-200CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 2.2-5 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 2.2-5 plug to 2.2-5 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 2.2-5 male low PIM cable 200 cm length using 1/4 inch superflexible coax. |
| 0 | ||
![]() Venkel Ltd. | TFCR0603-10W-K-8562CT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;85.6K;�0.25% RoHS : Compliant | 0 | ||
| TFCR0603-16W-K-8562FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;85.6K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-8562DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;85.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-8562BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;85.6K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-8562CT | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;85.6K;�0.25% RoHS : Compliant | 0 | |||
| UPTF2512-2W-N-8562DT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�10PPM;85.6K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-8562CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;85.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-8562FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;85.6K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-8562CT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;85.6K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-8562FT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;85.6K;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-8562BT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;85.6K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-8562FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;85.6K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-8562DT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;85.6K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0805-10W-E-8562AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;85.6K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-8562DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;85.6K;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | 2856265 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 12,302 | ||
DAC8562FSZ-REEL![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDSO20 RoHS : Compliant | 10,852 | |||
| BCM985625 | Broadcom Limited | 9,238 | ||||
DAC8562GBC![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time RoHS : Not Compliant | 9,001 | |||
| BCM85626IFSBG | Broadcom Limited | 8,301 | ||||
| BCM85622WIFSBG | Broadcom Limited | 7,427 | ||||
DAC8562EPZ![]() | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 16us Settling Time, PDIP20 RoHS : Compliant | 7,387 | |||
DAC8562FRU![]() | Analog Devices Inc | D/A Converter RoHS : Not Compliant | 7,348 | |||
DAC8562SDGST![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 7us Settling Time, PDSO10 RoHS : Compliant | 7,180 | |||
| BCM985620W | Broadcom Limited | 7,061 | ||||
| 1718562 | Phoenix Contact | Barrier Strip Terminal Block, 41A, 10mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,615 | |||
DAC8562TDSCT![]() | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 7us Settling Time, PDSO10 RoHS : Compliant | 5,680 | |||
| VSC8562XKS-11 | Microchip Technology Inc | Ethernet Transceiver, 2-Trnsvr, PBGA256 RoHS : Compliant | 4,105 | |||
| BCM85620IFSBG | Broadcom Limited | 3,595 | ||||
| DAC8562EVM | Texas Instruments | Development kits/Accessories | 3,416 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |