 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
887-5-R330F Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | AC0402FR-07887RL | YAGEO Corporation | SMD Chip Resistor, 887 Ohm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose, AC Series - Tape and Reel (Alt: AC0402FR-07887RL) RoHS : Compliant |
| 1,860,000 | |
| FDD8876 | onsemi | N-Channel PowerTrench? MOSFET 30V, 73A, 8.2mO - Tape and Reel (Alt: FDD8876) RoHS : Compliant |
| 75,000 | ||
| ERJ-2RKF8871X | Panasonic Electronic Components | SMD Chip Resistor, 8.87 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF8871X) RoHS : Compliant |
| 30,000 | ||
| CR0603-FX-8871ELF | Bourns Inc | - Tape and Reel (Alt: CR0603-FX-8871ELF) RoHS : Compliant |
| 20,000 | ||
| CRCW0603887KFKEA | Vishay Intertechnologies | SMD Chip Resistor, CRCW Series, 887 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film - Tape and Reel (Alt: CRCW0603887KFKEA) RoHS : Compliant |
| 20,000 | ||
| ERJ-2RKF8872X | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF8872X) RoHS : Compliant |
| 10,000 | ||
| NCV887100D1R2G | onsemi | Non-Synchronous Boost Controller, Automotive Grade - Tape and Reel (Alt: NCV887100D1R2G) RoHS : Compliant |
| 2,500 | ||
| 5-1393788-7 | TE Connectivity | Relay Signal DPDT-2CO 250VAC 12VDC Surface Mount - Tape and Reel (Alt: 5-1393788-7) RoHS : Compliant |
| 2,000 | ||
| MC33887PEKR2 | NXP Semiconductors | - Tape and Reel (Alt: MC33887PEKR2) RoHS : Compliant |
| 1,000 | ||
| MP8878GMJT-0019-Z | Monolithic Power Systems | - Tape and Reel (Alt: MP8878GMJT-0019-Z) RoHS : Compliant | 1,000 | |||
| RWR84S8871FRS73 | Vishay Intertechnologies | Through Hole Resistor, 8.87 kohm, RWR Series, 7 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR84S8871FRS73) RoHS : Not Compliant |
| 500 | ||
| RNC50H8872FSB14 | Vishay Intertechnologies | Through Hole Resistor, 88.7 kohm, ERC RNC Series, 50 mW, ? 1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RNC50H8872FSB14) RoHS : Not Compliant |
| 200 | ||
PIC16F887-I/PT | Microchip Technology Inc | 8-bit MCU, PIC, 20 MHz, 14 KB, 368 B, 44 Pins, TQFP - Trays (Alt: PIC16F887-I/PT) RoHS : Compliant |
| 76 | ||
| 5788793-1 | TE Connectivity | - Trays (Alt: 5788793-1) RoHS : Compliant |
| 51 | ||
| 8-87589-5 | TE Connectivity | Conn Shrouded Header HDR 8 POS 2.54mm Solder ST Thru-Hole - Trays (Alt: 8-87589-5) RoHS : Compliant |
| 19 | ||
 Newark | ERJ8ENF8871V | Panasonic Electronic Components | Res, 8K87, 1%, 0.25W, 1206, Thick Film; |Panasonic ERJ8ENF8871V RoHS : Compliant |
| 125,000 | |
| 82248 877U1000 | Belden Inc | Coaxial Cable; Coaxial Rg/U Type:6; Impe |Belden 82248 877U1000 RoHS : Compliant |
| 5,000 | ||
| DS12887+ | Analog Devices Inc | Rtc, 12Hr/24Hr, 4.5V To 5.5V, Edip-24; |Analog Devices, Inc. DS12887+ RoHS : Compliant |
| 4,086 | ||
| ERA2AEB8871X | Panasonic Electronic Components | Res, 8K87, 0.1%, Metal Film; |Panasonic ERA2AEB8871X RoHS : Compliant |
| 1,798 | ||
| ERA2AEB8871X | Panasonic Electronic Components | Res, 8K87, 0.1%, Metal Film; |Panasonic ERA2AEB8871X RoHS : Compliant |
| 1,798 | ||
| RJE741887420 | Amphenol Communications Solutions | Modular Conn, 8P8C, Rj45 Jack, Cat3, Th; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:Cat3; Ip Rating:Ip20; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 1,520 | ||
| ERJ8ENF8871V | Panasonic Electronic Components | Res, 8K87, 1%, 0.25W, 1206, Thick Film; |Panasonic ERJ8ENF8871V RoHS : Compliant |
| 1,190 | ||
| ERJ8ENF8871V | Panasonic Electronic Components | Res, 8K87, 1%, 0.25W, 1206, Thick Film; |Panasonic ERJ8ENF8871V RoHS : Compliant |
| 1,190 | ||
| ERJ8ENF8871V | Panasonic Electronic Components | Chip Res Smd, 8K87, ±1%, 250Mw; |Panasonic ERJ8ENF8871V RoHS : Compliant |
| 175 | ||
| ERJ8ENF8871V | Panasonic Electronic Components | Chip Res Smd, 8K87, ±1%, 250Mw; |Panasonic ERJ8ENF8871V RoHS : Compliant |
| 175 | ||
| 11.02.8876 | Rotronic-Secomp AG | Cable, Usb 3.0 A-Micro B Plug, 0.15M; |Roline 11.02.8876 (Alternate Part Number: 7611990173600 RoHS : Compliant |
| 37 | ||
| DS12CR887-33+ | Analog Devices Inc | Rtc W/ Nvsram, 912B, Hh:Mm:Ss, Edip-24; |Analog Devices, Inc. DS12CR887-33+ RoHS : Compliant |
| 25 | ||
| 887 | CEC Industries Ltd | Halogen Lamp 12V 50W Axial 95Cp; |Cec Industries 887 RoHS : Not Compliant |
| 0 | ||
| 887 | Adafruit Industries | Cool White Led Weatherproof Flexi-Strip 60 Led |Adafruit 887 RoHS : Not Compliant |
| 0 | ||
| 887 | Keystone Electronics Corp | Spacer, Round, Nylon 6.6, 6.35X15.875Mm; |Keystone 887 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | MAX887HESA+ | Analog Devices Inc | 100 Duty Cycle, Low-Noise, Ste RoHS : Compliant |
| 51,612 | |
| MAX8887EZK18+T | Analog Devices Inc | Low-Dropout, 300mA Linear Regu RoHS : Compliant |
| 28,283 | ||
| DS12CR887-5+ | Analog Devices Inc | RTCs with Constant-Voltage Tri RoHS : Compliant |
| 12,175 | ||
| MAX77887AEWL+T | Analog Devices Inc | Nano Power Buck-Boost with Inp RoHS : Compliant | 7,500 | |||
| DS12CR887-33+ | Analog Devices Inc | RTCs with Constant-Voltage Tri RoHS : Compliant |
| 632 | ||
| DS12887+ | Analog Devices Inc | Real-Time Clocks RoHS : Compliant |
| 374 | ||
| LTC3887IUJ-2#PBF | Analog Devices Inc | 2x Out PolyPhBuck DC/DC Cntr w RoHS : Compliant |
| 74 | ||
AD7887ARMZ-REEL | Analog Devices Inc | 2 CHANNEL, SERIAL 12-BIT ADC I RoHS : Compliant |
| 0 | ||
| MAX8878EUK33+ | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA | 0 | |||
| LTC3887IUJ#WPBF | Analog Devices Inc | 2x Out PolyPhBuck DC/DC Cntr w RoHS : Compliant |
| 0 | ||
| MAX6887QETE+T | Analog Devices Inc | Hex/Quad, Power-Supply Supervi RoHS : Compliant |
| 0 | ||
| MAX8877EUK18+ | Analog Devices Inc | Low-Noise, Low-Dropout, 150mA RoHS : Compliant | 0 | |||
| LTM2887HY-5I#PBF | Analog Devices Inc | SPI/Dig or I2C micronMod Isola RoHS : Compliant |
| 0 | ||
| MAX8874REUK+ | Analog Devices Inc | Low-Dropout 120mA Linear Regul RoHS : Compliant | 0 | |||
| MAX8875EUK50+ | Analog Devices Inc | 150mA, Low-Dropout Linear Regu RoHS : Compliant | 0 | |||
 NXP Semiconductors | KIT33887EKEVBE | NXP Semiconductors | Evaluation Kit - MC33887EK, H-Bridge, 120mOhm RDSON Typical with Sleep Mode and Current Sense, RoHS : Not Compliant |
| 39 | |
 RS | ERJ-3EKF8871V-CUT TAPE | Panasonic Electronic Components | RESISTOR, THICK FILM, RES 8.87 KILOHMS, PWR-RTG 0.1 W, TOL 1%,SMT,0603,CUT TAPE |
| 85,655 | |
| 88732-8702 (887-3287-02) | Molex | CABLE ASSEMBLY 28AWG 5 POS USB TO 5 POSUSB M-M SOLDER-SOLDER BAG, 88740 SERIES |
| 751 | ||
| 3038875 (ST 4-MT) | Phoenix Contact | KNIFE DISCONNECT TRM BLK ST SERIES 0.08 TO 6MMSQ 400V 20A SPRING TERM GREY |
| 110 | ||
| 1828871 | RS Pro | USB CABLE ASSEMBLY 2.0 MALE A- MALE B WHITE PVC SHEATH 3.3FT (1M) |
| 30 | ||
| 88732-9200 (887-3292-00) | Molex | CABLE ASSEMBLY, USB TYPE-A, USB TYPE-B, 4 COND ROUND CBL, 6.86FT., 28 AWG, SHLD |
| 27 | ||
| 2170887 (2170887/328) | Lapp Group | ETHERLINE CAT5 HYBRID CABLE, 22AWG/2PR+16AWG/4C, HALOGENFREE, GREEN |
| 6 | ||
| 397887 | RS Pro | FLAME RETARDANT HEAT SHRINK TUBING 2:1 BLUE POLYOLEFIN 0.09/0.05IN 4FT LENGTH |
| 5 | ||
| 2453887 (25533153) (HCI505007500-010RS) | RS Pro | 1/2-13 X 7 1/2 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, COARSE |
| 5 | ||
| 2675887 | RS Pro | EQUIPMENT HOOK-UP WIRE, SINGLE CORE, PVC, 7 STRANDS, 7 0.2MM 500M, YELLOW |
| 3 | ||
| P-RSV RKV 403-1188XL-0.6M/S1599 (U-88733) | TURCK Inc | PROCESS AUTOMATION, CORDSET,7/8-16 MALE TO 7/8-16 FEMALE,4 WIRE,0.6M, EX, BLACK |
| 2 | ||
| 7038887 (7038887/328) | Lapp Group | UNITRONIC SENSOR FD CONT.FLEX CABLE, 22AWG/5C, SHIELDED, PUR, BLACK |
| 1 | ||
| DX80N9X6S-PM8 (87106) | Banner Engineering Corp | WIRELESS NODE, 900 MHZ, LCD, 6 NPN/PNP IN, 6 PNP OUT, IP67, 87106, PM SERIES |
| 1 | ||
| 887 | Adafruit Industries | COOL WHITE LED WEATHERPROOF FLEXI-STRIP 60 LED - (1 M) |
| 0 | ||
| 887 | RACO | 4-11/16" COVER - 1.594 20AMP RECEPTACLE |
| 0 | ||
| 887 | Keystone Electronics Corp | SPACER, 1/4 ROUND, CLEAR HOLE, LENGTH .625, HOLE SIZE 6, NYLON 6/6 |
| 0 | ||
 Microchip Technology Inc | ZL88701LDG1 | Microchip Technology Inc | 2CH ZL880 100V Tracking, 64QFN, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 27,300 | |
| LAN88730AM-C-V01 | Microchip Technology Inc | Small footprint MII/RMII 10/100 Ethernet Transceiver for Automotive applications, VQFN, Projected EOL: 2041-07-13 RoHS : Compliant |
| 19,110 | ||
| PIC16F18875-E/P | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, PDIP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 4,130 | ||
| PIC16F18877-I/P | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, PDIP, Projected EOL: 2046-05-13 RoHS : Compliant |
| 3,650 | ||
| PIC16LF18876T-I/ML | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, QFN, Projected EOL: 2046-08-09 RoHS : Compliant |
| 3,200 | ||
| PIC16LF18877-E/PT | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-05-13 RoHS : Compliant |
| 2,880 | ||
| PIC16LF18876-E/MV | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-08-09 RoHS : Compliant |
| 2,701 | ||
| LAN8872T-V/PUAVAO | Microchip Technology Inc | 1000BASE-T1 SGMII PHY, VQFN, Projected EOL: 2051-07-08 RoHS : Compliant |
| 2,000 | ||
| PIC16F18877-E/ML | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, QFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 1,490 | ||
| PIC16F18877-E/PTVAO | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2051-06-14 RoHS : Compliant |
| 1,440 | ||
| PIC16F18876-I/P | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, PDIP, Projected EOL: 2046-08-09 RoHS : Compliant |
| 983 | ||
| PIC16F18876-E/PT | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, TQFP, Projected EOL: 2046-08-09 RoHS : Compliant |
| 641 | ||
PIC16F18877-E/MV | Microchip Technology Inc | 56KB Flash, 4KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-05-13 RoHS : Compliant |
| 369 | ||
| PIC16F18875-I/PT | Microchip Technology Inc | 14KB, 1KB RAM, 256 EE, 36 I/O, DSM, ADC w/MathPak, WWDT, CRC/SCAN, CIPs, TQFP, Projected EOL: 2040-10-26 RoHS : Compliant |
| 155 | ||
| PIC16F18876-I/MV | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256B EE, ADCC, Analog, PWM, CWG, SMT, HLT, WWDT, SCAN/CRC, UQFN, Projected EOL: 2046-08-09 RoHS : Compliant |
| 87 | ||
 Bisco Industries | D2887 | WASHERS | 1,145 | |||
| E887RS | MISC MAGNETS | 1,000 | ||||
| 1887513 | WASHERS | 800 | ||||
| AS138-87B BLACK | Caplugs | 386 | ||||
| 88732-9200 | Molex | RoHS : Compliant | 380 | |||
| Z9887-5 | Accurate Manufactured Products Group Inc | 200 | ||||
| 18871352 | MACHINE SCREWS | 96 | ||||
| 1887599 | WASHERS | 70 | ||||
| 887 | Keystone Electronics Corp | 57 | ||||
| 114118-875SS-12 | Accurate Screw Machine | 25 | ||||
| CER-1887-2D-CT-C1 | Staffall | 21 | ||||
| 11887-SS-3124-7 | Amatom Electronic Hardware | 15 | ||||
| MP1887-M09-F09-M5 | UNICORP | 13 | ||||
| UZ8870 | ACTIVE COMPNTS/DIODES | 2 | ||||
| M28876/10BDW | MIL-SPEC Connectors | 1 | ||||
 Rochester Electronics | FDS8878-F123 | onsemi | N-Channel PowerTrench® MOSFET 30V, 10.2A, 14mΩ RoHS : Compliant |
| 2,896 | |
AD9887AKS-140 | Analog Devices Inc | Consumer Circuit, CMOS, PQFP160 RoHS : Not Compliant |
| 20,441 | ||
5962-8871903MYA | Analog Devices Inc | D/A Converter, 4 Func, Parallel, Word Input Loading, 10us Settling Time, CQCC44 RoHS : Not Compliant |
| 494 | ||
5962-8876404XX | Analog Devices Inc | IC ADC 2 CONV 8Bits Flash Parallel 28-DIP Tube RoHS : Not Compliant |
| 50 | ||
5962-8872901DA | Texas Instruments | Inverter, AS Series, 6-Func, 1-Input, TTL, CDFP14 RoHS : Not Compliant |
| 1 | ||
5962-88744022A | Texas Instruments | Line Driver, 2 Func, 2 Driver, BIPolar, CQCC20 RoHS : Not Compliant |
| 60 | ||
| LTC3887IUJ-2#PBF | Linear Technology | Switching Controller, Current-mode, CMOS, PQCC40 |
| 3,599 | ||
MAX5887EGK | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant |
| 2,417 | ||
MAX8873SEUK-T | Maxim Integrated Products | Fixed/Adjustable Positive LDO Regulator, 2.75V Min, 2.93V Max, 0.12V Dropout, PDSO5 RoHS : Not Compliant |
| 7,500 | ||
| MAX8875EZK29 | Maxim Integrated Products | MAX8875 150mA, Low-Dropout Linear Regulator With Power-Ok Output |
| 2,384 | ||
| MAX8877EZK25 | Maxim Integrated Products | MAX8877 Low-Noise, Low-Dropout, 150mA Linear Regulator With 2982 Pinout |
| 2,189 | ||
| MAX8878EUK28-T | Maxim Integrated Products | 150mA Linear Low-Noise, Low-Dropout Regulator RoHS : Not Compliant |
| 10,000 | ||
| MAX8878EUK33+ | Maxim Integrated Products | Fixed Positive LDO Regulator, 3.3V, 0.12V Dropout, PDSO5 RoHS : Compliant |
| 2,095 | ||
| MAX8887EZK15 | Maxim Integrated Products | Fixed Positive LDO Regulator, 1.5V, BICMOS, PDSO5 RoHS : Not Compliant |
| 1,395 | ||
| UPD8874CY-A | Renesas Electronics Corporation | CCD Sensor, 10800 Horiz pixels, 3 Vert pixels, 11.40-12.60V, Rectangular, Through Hole Mount RoHS : Compliant |
| 249 | ||
 Sager | 887 | Keystone Electronics Corp | Standoffs & Spacers 5/8 6-32 NYL SPACER |
| 0 | |
| DB3-X0-07-887-121-D | Carling Technologies | Circuit Breakers | 0 | |||
| A18874-15 | Qnity Laird | INTEGRATED SOLUTIONS / MFS / COOLZORB MAXZORB / COOLZORB MAXZORB,150 / 18X18IN, / UOM=EA / PACKAGING=BULK |
| 0 | ||
| A18876-04 | Qnity Laird | TPUTTY 607MF CARTRIDGE, 300CC ALU OPEN |
| 0 | ||
| AAA8875-00 | TE Connectivity | TE Connectivity 91D3-10-09-1-ZB-HE200 | 0 | |||
| 936887-002 | TE Connectivity | Hook-up Wire 22759/33-26-7 RoHS : Compliant |
| 0 | ||
| IEGBX66-33887-50-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| IEL1-28878-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 8-805887-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION | 0 | |||
| CA1-X0-18-872-A21-MJ | Carling Technologies | Circuit Breakers | 0 | |||
| CH4887-000 | TE Connectivity | TE Connectivity TX40AU00-2414 |
| 0 | ||
| ECUE-12-887-T1-FF-01-1 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant |
| 0 | ||
| 0828877 | Phoenix Contact | Terminal Block Tools & Accessories US-EMLP (17 x 7) YE RoHS : Compliant |
| 0 | ||
| 0887689930 | Molex | HDMI Cables | 0 | |||
| 0887806010 | Molex | HDMI, Displayport & DVI Connectors | 0 | |||
 TME | 88714701 | Electro Terminal | Quick splice; 24A; 450V; spring clamp; copper; anthracite; ways: 1 |
| 3,195 | |
| 887 | Keystone Electronics Corp | Spacer sleeve; cylindrical; polyamide; L: 15.9mm; Øout: 6.4mm |
| 2,490 | ||
| CRT03F7E8873 | Viking Technology | Resistor: thick film; 887kΩ; 0603; 100mW; ±1%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT05J7E8873 | Viking Technology | Resistor: thick film; 887kΩ; 0805; 125mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT10J7E8871 | Viking Technology | Resistor: thick film; 8.87kΩ; 1210; 500mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRW20FP4--887K | Viking Technology | Resistor: thick film; 887kΩ; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW62FP7--887R | Viking Technology | Resistor: thick film; 887Ω; SMD; 0612; 1.5W; ±1%; CRW; -55÷155°C |
| 0 | ||
| DS12887+ | Analog Devices Inc | IC: RTC circuit; Multiplexed; NV SRAM; 114BSRAM; DIP24; 4.5÷5.5V RoHS : Compliant |
| 0 | ||
| DS12CR887-33+ | Analog Devices Inc | IC: RTC circuit; SRAM; 114BSRAM; EDIP24; 2÷5.5V RoHS : Compliant |
| 0 | ||
| CQ03WAF8872T5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 88.7kΩ; SMD; 0603; 100mW; ±1%; CQ; 75V RoHS : Compliant |
| 0 | ||
| C10-737887-053 | Amphenol Corporation | Connector: DC supply |
| 0 | ||
| 9918870000 | Weidmüller Interface GmbH & Co. KG | Tester: electrical; LCD; 500mVAC÷1kVAC,500mVDC÷1.5kVDC; 16÷950Hz RoHS : Compliant |
| 0 | ||
| RN73H1ETTP8872F50 | KOA Speer Electronics Inc | Resistor: thin film; 88.7kΩ; SMD; 0402; 63mW; ±1%; RN73H; 50V RoHS : Compliant |
| 0 | ||
| 88721 | Delock | Cable: telephone; coiled; RJ11 plug,RJ45 socket; black; PVC; 32AWG |
| 0 | ||
| E20887 | ifm efector inc | Mounting kit |
| 0 | ||
 Ameya Holding Limited | FDD8874 | onsemi | MOSFET N-CH 30V 116A D-PAK RoHS : Compliant | 350,100 | ||
| MCR01SMQPF8873 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） |
| 40,000 | ||
| MCR01SMQPF8872 | ROHM Semiconductor | 1005（0402）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） |
| 20,000 | ||
ESR18EZPF8870 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
| KTR18EZPF8874 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 15,000 | ||
| LTR18EZPF8870 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 15,000 | ||
| MP8878GMJT-001B-Z | Monolithic Power Systems | 6,244 | ||||
| SDR03EZPF8870 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
| MPQ8875AGVE-8000-AEC1-Z | Monolithic Power Systems | 3,654 | ||||
| NCV887740D1R2G | onsemi | IC REG CTRLR BOOST 8SOIC RoHS : Compliant | 2,600 | |||
| ZL88702LDF1 | Microchip Technology Inc | RoHS : Compliant | 1,930 | |||
| MCR10PZPZF8871 | ROHM Semiconductor |
| 400 | |||
DRV8876NPWPT | Texas Instruments | RoHS : Compliant | 324 | |||
| BD8876FV-E2 | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| BD8878FV-E2 | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
 ComSIT USA | 887 | KEYSTONE ELECTRONICS CORP | AVAILABLE EU | 618 | ||
| 8870 | WEBER PRECISION GRAPHICS | AVAILABLE EU | 24 | |||
| LTR18EZPF8870 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 2,778,750 | |||
| RK73H2BTTD8870F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 34 | |||
DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,853 | |||
| DRV8874QPWPRQ1 | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,324 | |||
| FDS8870 | onsemi | AVAILABLE EU RoHS : Compliant | 1,595 | |||
| MC33887APVWR2 | NXP Semiconductors | AVAILABLE EU | 1,487 | |||
ComSIT USA | MAX8877EUK32T | Maxim Integrated Products | LOW-NOISE, LOW-DROPOUT, 150MILLIAMP LINEAR REGULATOR WITH 2982 PINOUT Fixed Positive LDO Regulator, 3.2V, 0.12V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 22,053 | ||
| GR8875NRKAG | Grenergy Opto Inc | Electronic Component RoHS : Compliant | 6,330 | |||
| U2510SK6164DISME887 | ZMDI | Electronic Component RoHS : Not Compliant | 6,020 | |||
| LNG887618000MHZ | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 5,000 | |||
| MRS25000C8870FC100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.6W, 887ohm, 350V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount RoHS : Compliant | 4,000 | |||
| MAX8887EZK33+T | Maxim Integrated Products | LDO Regulator Pos 3.3V 0.3A 5-Pin TSOT-23 T/R RoHS : Compliant | 1,930 | |||
| PMB8876X21G | Intel Corporation | Electronic Component RoHS : Compliant | 1,032 | |||
| 887019 | Eska | Electronic component/module, board-mount, for industrial or automation control applications RoHS : Compliant | 1,000 | |||
FDP8870 | Fairchild Semiconductor Corporation | 30 V, 156 A, 4.1 MILLI OHM N-CHANNEL POWERTRENCH MOSFET Power Field-Effect Transistor, 19A I(D), 30V, 0.0046ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 800 | |||
| DRX8872CPLA1 | TDK Micronas GmbH | COFDM DEMODULATOR/FEC Consumer Circuit, PQFP80 RoHS : Not Compliant | 357 | |||
ADS7887SDBVT | Texas Instruments | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6 RoHS : Compliant | 250 | |||
| AD7887ARMREEL7 | Analog Devices Inc | 2.7 V TO 5.25 V, MICROPOWER, 2-CHANNEL, 125 KSPS, 12-BIT ADC IN 8-LEAD MSOP ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO8 RoHS : Not Compliant | 100 | |||
| PDRV8876QPWPRQ1 | Texas Instruments | H-BRIDGE MOTOR DRIVER WITH INTEGRATED CURRENT SENSE AND REGULATION Brush DC Motor Controller, 3.5A, PDSO16 RoHS : Compliant | 70 | |||
| BGE887BO | Philips Semiconductors | OPTICAL RECEIVER MODULE Receiver, 1290nm Min, 1600nm Max, Panel Mount RoHS : Not Compliant | 55 | |||
| AD9887KS100 | Analog Devices Inc | DUAL INTERFACE FOR FLAT PANEL DISPLAYS Consumer Circuit, CMOS, PQFP160 RoHS : Not Compliant | 14 | |||
 Interstate Connecting Components | 887 | Keystone Electronics Corp | CLEAR HOLE SPACER NYLON |
| 349 | |
| CJ9887-011 | TE Connectivity | CSJA-36E/1XU-1XU-M3 RoHS : Compliant | 0 | |||
| C10-737887-053 | Amphenol Industrial Operations | SLP 10.3MM50MM CRIMPING BARREL | 0 | |||
| RJE741887420 | Amphenol Commercial | SINGLE PORT MODULAR JACK - VER | 0 | |||
| 936887-002 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC22759/33-26-7 RoHS : Compliant | 0 | |||
| 88-725010-61PF | Amphenol Aerospace | 0 | ||||
| KM288769-C11P6 | Amphenol Fiber Systems International | FIBER PLUG 8 CHNL MIL 90 DEG ASSY KIT | 0 | |||
| GG8877M1E/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CH4887-000 | TE Connectivity | TX40AU00-2414 | 0 | |||
| 660-088-7U06-5 | Glenair Inc | PROTECTIVE COVER | 0 | |||
| 3742608873 | TE Connectivity |
| 0 | |||
| 248-8724-241 | ITT Interconnect Solutions | 248-8724-241 | 0 | |||
| 248-8729-110 | ITT Interconnect Solutions | 2488729110 | 0 | |||
| 2488732-1 | TE Connectivity | O-RING SNA 38999 SHELL 21 & 22 RoHS : Compliant | 0 | |||
| 448-8794-002 | ITT Interconnect Solutions | 448-8794-002 | 0 | |||
 NexGen Digital | DRV8876PWPR | Texas Instruments | RoHS : Compliant | 232,772 | ||
| CRCW0603887KFKEA | Vishay Huntington | 30,261 | ||||
| RK73H1JTTD8873F | KOA Speer Electronics Inc | RoHS : Compliant | 25,000 | |||
DRV8872DDAR | Texas Instruments | RoHS : Compliant | 10,000 | |||
GRM1887U1H101JZ01D | Murata Manufacturing Co Ltd | RoHS : Compliant | 7,997 | |||
| MT8870DSR1 | Microchip Technology Inc | RoHS : Compliant | 2,899 | |||
| PIC16F18875-I/P | Microchip Technology Inc | RoHS : Compliant | 2,073 | |||
| ERJ-3EKF8871V | Panasonic Electronic Components | 1,651 | ||||
| ERA3AEB8871V | Panasonic Electronic Components | RoHS : Compliant | 741 | |||
| FDC8878 | onsemi | RoHS : Compliant | 434 | |||
| 640388-7 | TE Connectivity | RoHS : Compliant | 92 | |||
| RN731JTTD8871B25 | KOA Speer Electronics Inc | RoHS : Compliant | 17 | |||
| RC0402FR-07887KL | YAGEO Corporation | RoHS : Compliant | 13 | |||
| 5962-8874601UA | Microsemi FPGA & SoC (now Microchip) | 6 | ||||
| 1658871-1 | TE Connectivity | RoHS : Compliant | 6 | |||
 PEI Genesis | CR28876-110201-1 | SOURIAU-SUNBANK |
| 0 | ||
| 76Z3808-87 | SOURIAU-SUNBANK |
| 0 | |||
| CB28876-A1502 | SOURIAU-SUNBANK |
| 0 | |||
| CD28876-1510-D | SOURIAU-SUNBANK |
| 0 | |||
| SE20C1887ARL12 | SOURIAU-SUNBANK |
| 0 | |||
| SE59F2887A34N | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-233106-1 | SOURIAU-SUNBANK |
| 0 | |||
| M28876/7B11P1 | Amphenol Corporation |
| 0 | |||
| 8873149-006 | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-130406-1 | SOURIAU-SUNBANK |
| 0 | |||
| CP28876-150806-3-133 | SOURIAU-SUNBANK |
| 0 | |||
| M28876/12B11S2 | Amphenol Corporation |
| 0 | |||
| CD28876-1110-D | SOURIAU-SUNBANK |
| 0 | |||
| 8873149-019 | SOURIAU-SUNBANK |
| 0 | |||
| CD28876-1310-D | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 1418887-1 | TE Connectivity | Connectors RoHS : Compliant |
| 264,000 | |
| 170887-1 | TE Connectivity | connector accessories RoHS : Compliant |
| 4,554 | ||
| 8-87589-5 | TE Connectivity | TE COMPONENT 8-87589-5 RoHS : Compliant |
| 1,020 | ||
| 321887 | TE Connectivity | DG 22-16COM 22-18MIL HT R 4 RoHS : Compliant |
| 695 | ||
| 1102887-1 | TE Connectivity | Unspecified Connectors RoHS : Compliant |
| 317 | ||
| 936887-002 | TE Connectivity | CABLE-PROT PART (TE REF 936887-002) RoHS : Compliant |
| 251 | ||
| 5788796-2 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN,BL) RoHS : Compliant |
| 170 | ||
| RJSGE4887441 | Amphenol Corporation | Connector RoHS : Unknown |
| 139 | ||
| 1887201-3 | TE Connectivity | Relays RoHS : Compliant |
| 100 | ||
| 5748872-1 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 61 | ||
| 5788793-1 | TE Connectivity | TE COMPONENT (REF 5788793-1) RoHS : Compliant |
| 57 | ||
| 88-578879-04P | Amphenol Corporation | CONNECTOR |
| 7 | ||
| 5-805887-3 | TE Connectivity | ANVIL, COMBINATION |
| 5 | ||
| 805887-3 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 1 | ||
| 6-1633588-7 | TE Connectivity | CRIMPER, WIRE F .300 RoHS : Compliant |
| 1 | ||
 PUI | 12.88703 | 269,940 | ||||
| 12.88757 | 73,118 | |||||
| 12.88744 | 68,855 | |||||
| 12.88720 | 68,511 | |||||
| 12.88772 | 56,953 | |||||
| 12.88727 | 30,854 | |||||
| 12.88785 | 18,033 | |||||
| 12.88761 | 17,680 | |||||
| 12.88750 | 10,065 | |||||
| 12.88716 | 2,500 | |||||
| 12.88798 | 1,558 | |||||
| 12.88776 | 1,000 | |||||
| 12.88709 | 250 | |||||
| 12.88754 | 10 | |||||
| 12.88795 | 5 | |||||
 Richardson RFPD | AD7887ARMZ-REEL | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial 8-P RoHS : Compliant |
| 0 | |
| LTC3887IUJ-2#PBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 1000kHz 40-Pin QFN RoHS : Compliant |
| 0 | ||
| 514CCC000887BAGR | Skyworks Solutions Inc | Oscillator XO 24MHz ±30ppm CMOS 52% 3.3V 6-Pin SMD RoHS : Compliant |
| 0 | ||
| PIC16F887-I/PT | Microchip Technology Inc | MCU 8-bit PIC RISC 14KB Flash 2.5V/3.3V/5V 44-Pin RoHS : Compliant | 0 | |||
| LTM2887HY-5I#PBF | Analog Devices Inc | Digital Isolator Logic 6-CH 20Mbps 32-Pin BGA Tray RoHS : Compliant |
| 0 | ||
| LTM2887IY-5S#PBF | Analog Devices Inc | Digital Isolator Logic 6-CH 20Mbps 32-Pin BGA Tray RoHS : Compliant |
| 0 | ||
| SI5345B-D08887-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| LTM2887CY-5I#PBF | Analog Devices Inc | Digital Isolator Logic 6-CH 20Mbps 32-Pin BGA Tray RoHS : Compliant |
| 0 | ||
AD7887WARMZ-RL | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial Aut RoHS : Compliant |
| 0 | ||
| LTC3887EUJ-2#TRPBF | Analog Devices Inc | DC/DC Cntrlr Dual-OUT Step Down 1000kHz 40-Pin QFN RoHS : Compliant |
| 0 | ||
| SI5345B-D07887-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5338B-B08872-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5386A-E08871-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 2949.12MHz-O RoHS : Compliant | 0 | |||
| 887098-1 | TE Connectivity | Conn Type F 0Hz to 1GHz 75OhmCrimp RACable Mount P RoHS : Not Compliant | 0 | |||
| 514CCA000887AAGR | Skyworks Solutions Inc | Oscillator XO 24MHz ±30ppm CMOS 52% 3.3V 6-Pin SMD RoHS : Compliant |
| 0 | ||
 Rutronik | RC1206FR-13887RL | YAGEO Corporation | RC1206 887R 1% 0,25W TK100 RoHS : Compliant |
| 4,680,000 | |
| RC0603FR-07887RL | YAGEO Corporation | RC0603 887R 1% 0,1W TK100 RoHS : Compliant |
| 450,000 | ||
| AC0603FR-07887RL | YAGEO Corporation | AC0603 887R 1% 0,1W AUTOMO RoHS : Compliant |
| 210,000 | ||
| RC1210FR-07887RL | YAGEO Corporation | RC1210 887R 1% 0,5W TK100 RoHS : Compliant |
| 80,000 | ||
| RC0201FR-07887KL | YAGEO Corporation | RC0201 887K 1% 0,05W TK200 RoHS : Compliant |
| 30,000 | ||
| RC0805FR-07887RL | YAGEO Corporation | RC0805 887R 1% 0,125W TK100 RoHS : Compliant |
| 25,000 | ||
| RC1206FR-07887RL | YAGEO Corporation | RC1206 887R 1% 0,25W TK100 RoHS : Compliant |
| 20,000 | ||
| RC0402FR-07887KL | YAGEO Corporation | RC0402 887K 1% 0,063W TK100 RoHS : Compliant |
| 20,000 | ||
| RK73H2ATTD8870F | KOA Speer Electronics Inc | RC0805 887R 1% 0,25W TK100 RoHS : Compliant |
| 10,000 | ||
| RC0402FR-07887RL | YAGEO Corporation | RC0402 887R 1% 0,063W TK100 RoHS : Compliant |
| 10,000 | ||
| CSRV0204FTDV8871 | Viking Technology | MM0204 8,87K 1% 0,25W TK50 RoHS : Compliant |
| 9,000 | ||
| 955522887 | Molex | RJ45 Modular_Jack Shielded High-Temp RoHS : Compliant |
| 4,480 | ||
| C10-737887-073 | Amphenol Interconnect Products Inc | SLP 10.3mm CRIMPING BARREL RoHS : Compliant |
| 100 | ||
 Chip 1 Exchange | 1418887-1 | TE Connectivity | INSTOCK RoHS : Compliant | 650,000 | ||
| CH0878879D | Bivar Inc | INSTOCK | 117,500 | |||
| NCV887100D1R2G | onsemi | INSTOCK RoHS : Compliant | 38,584 | |||
| 0603SAF8873T5E | ROYAL | INSTOCK | 35,620 | |||
| 12.88757 | Geyer Electronic E K | INSTOCK | 32,118 | |||
| 0805S8F8873T5E | ROYAL | INSTOCK | 24,570 | |||
| CR16-8872-F# | ASJ Holdings Limited | INSTOCK | 9,161 | |||
| ERA-6AEB8872V | INSTOCK | 4,062 | ||||
| MP38873DL-LF-# | INSTOCK | 2,248 | ||||
| AD9887AKS-140 | INSTOCK | 1,415 | ||||
DS17887-5 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 386 | |||
| MCZ33887EK | INSTOCK | 100 | ||||
MCZ33887EK | Freescale Semiconductor | INSTOCK RoHS : Compliant | 100 | |||
| 1488750-1 | TE Connectivity | INSTOCK | 8 | |||
| 12.88795 | Geyer Electronic E K | INSTOCK | 5 | |||
 Avnet Abacus | 926887-1 | TE Connectivity | Contact Universal MATENLOK Pin Crimp 14 AWG Tin Plated Contacts (Alt: 926887-1) RoHS : Compliant | 280,000 | ||
| CRCW0402887KFKED | Vishay Intertechnologies | SMD Chip Resistor 887 kohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402887KFKED) RoHS : Compliant | 180,000 | |||
| 5-1393788-7 | TE Connectivity | Relay Signal DPDT2CO 250VAC 12VDC Surface Mount (Alt: 5-1393788-7) RoHS : Compliant | 62,400 | |||
| CRCW0402887RFKED | Vishay Intertechnologies | SMD Chip Resistor 887 ohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402887RFKED) RoHS : Compliant | 40,000 | |||
| TNPW0603887RBEEA | Vishay Intertechnologies | - Tape and Reel (Alt: TNPW0603887RBEEA) RoHS : Compliant | 15,000 | |||
| 955222887 | Molex | Modular Connector RJ45 Jack 1 x 1 Port 8P8C Cat3 Through Hole Mount (Alt: 955222887) RoHS : Compliant | 12,880 | |||
| RN73C2A887RBTD | TE Connectivity | SMD Chip Resistor 887 Ohm 01 100 mW 0805 2012 Metric Thin Film (Alt: 1676452-3) RoHS : Compliant | 5,000 | |||
| 188753-4 | TE Connectivity | AMP1887534 (Alt: 188753-4) RoHS : Compliant | 1,620 | |||
| 1934887 | Phoenix Contact | Pluggable Terminal Block 5 mm 4 Ways 26 AWG 14 AWG 25 mm Screw (Alt: 1934887) RoHS : Compliant | 750 | |||
| EL88702001 | TE Connectivity | VERSAFIT120STK (Alt: EL88702001) RoHS : Compliant | 600 | |||
| RJSGE-488-7411 | Amphenol Corporation | Conn Modular Jack Receptacle 8 POS Press Fit RA Through Hole 32 Terminal 4 Port Tray (Alt: RJSGE-488-7411) RoHS : Compliant | 330 | |||
| 1888700 | Phoenix Contact | WireToBoard Terminal Block 508 mm 4 Ways 24 AWG 14 AWG 25 mm Screw (Alt: 1888700) RoHS : Compliant | 250 | |||
| 3026887 | Phoenix Contact | SK 20D SK20D (Alt: 3026887) RoHS : Compliant | 250 | |||
| B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | |||
| M80-8871601 | Harwin | PCB Receptacle BoardtoBoard WiretoBoard 2 mm 2 Rows 16 Contacts Through Hole Mount (Alt: M80-8871601) RoHS : Not Compliant | 143 | |||
Avnet Asia | CRCW0201887RFNED | Vishay Intertechnologies | (Alt: CRCW0201887RFNED) RoHS : Compliant | 10,000 | ||
| B39262B8870L210 | Qualcomm RFFE Filter Products | (Alt: B39262B8870L210) RoHS : Compliant | 0 | |||
| 10188767-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAOH 8*8 WITH CRUSH RIB (Alt: 10188767-1019LF) RoHS : Compliant | 0 | |||
| NCV887100D1R2G | onsemi | Non-Synchronous Boost Controller, Automotive Grade (Alt: NCV887100D1R2G) RoHS : Compliant | 0 | |||
| B39242B8879P810 | Qualcomm RFFE Filter Products | SAW FILTER B40 1109SIZE TX (Alt: B39242B8879P810) RoHS : Compliant | 0 | |||
| ASP-227887-01 | Samtec Inc | ASP CUSTOM PRODUCTS (Alt: ASP-227887-01) RoHS : Compliant | 0 | |||
| 10128875-009RLF | Amphenol Corporation | (Alt: 10128875-009RLF) RoHS : Compliant |
| 0 | ||
| 10188768-1019LF | Amphenol Corporation | HSBP,EXAMAX2 RAR 8*8 WITH SLOT CONTACT (Alt: 10188768-1019LF) RoHS : Compliant | 0 | |||
| 1888781-1 | TE Connectivity | Connector Accessories Cage for QSFP Press Fit Tray (Alt: 1888781-1) RoHS : Compliant | 0 | |||
| 603-38.88-7 | Abracon Corporation | (Alt: 603-38.88-7) RoHS : Compliant | 0 | |||
| 640388-7 | TE Connectivity | Conn Wire to Board HDR 7 POS 3.96mm Solder ST Thru-Hole (Alt: 640388-7) RoHS : Compliant | 0 | |||
| ERJ3EKF8870V | Panasonic Electronic Components | SMD Chip Resistor, 887 ohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film (Alt: ERJ3EKF8870V) RoHS : Compliant | 0 | |||
| ERJU02F8872X | Panasonic Electronic Components | SMD Chip Resistor, 88.7 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, Anti-Sulfur (Alt: ERJU02F8872X) RoHS : Compliant | 0 | |||
| TC358871XBG(NOK) | Toshiba America Electronic Components | (Alt: TC358871XBG(NOK)) RoHS : Compliant | 0 | |||
| ERA3AEB8870V | Panasonic Electronic Components | SMD Chip Resistor, 887 ohm, ? 0.1%, 100 mW, 0603 [1608 Metric], Metal Film (Thin Film) (Alt: ERA3AEB8870V) RoHS : Compliant | 0 | |||
 Avnet Silica | NCV887103D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887103D1R2G) RoHS : Compliant | 5,000 | ||
| AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | |||
| AH1887-ZG-7 | Diodes Incorporated | Hall Effect Switch Unipolar 35 G 20 G 165 V to 33 V 5 Pins SOT553 (Alt: AH1887-ZG-7) RoHS : Compliant | 3,000 | |||
| NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 2,500 | |||
| PIC16F887-I/PT | Microchip Technology Inc | 8bit MCU PIC 20 MHz 14 KB 368 B 44 Pins TQFP (Alt: PIC16F887-I/PT) RoHS : Compliant | 960 | |||
| KSZ8873RLL | Microchip Technology Inc | (Alt: KSZ8873RLL) RoHS : Compliant | 480 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 480 | |||
| PIC16F887-E/PT | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F887-E/PT) RoHS : Compliant | 160 | |||
PIC16F18877-I/PT | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 56KB Flash 25V33V5V 44Pin TQFP Tray (Alt: PIC16F18877-I/PT) RoHS : Compliant | 160 | |||
| EVQ8873-VE-00A | Monolithic Power Systems | 36V 5A SingleChannel QuadSwitch Synchronous DCDC BuckBoost Converter Evaluation Board (Alt: EVQ8873-VE-00A) RoHS : Compliant | 0 | |||
5962-88726093A | Teledyne HiRel | High Density UV Erasable Programmable Logic Device 28Pin CLCC (Alt: 5962-88726093A) RoHS : Not Compliant | 0 | |||
| 5962-8873504LA | Teledyne HiRel | (Alt: 5962-8873504LA) RoHS : Not Compliant | 0 | |||
| NCV887100D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887100D1R2G) RoHS : Compliant | 0 | |||
| MP8870GL-0012-P | Monolithic Power Systems | MP8870GL0012P (Alt: MP8870GL-0012-P) RoHS : Compliant | 0 | |||
| PIC16F18877-E/MV | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 56KB Flash 23V to 55V 40Pin UQFN Tube (Alt: PIC16F18877-E/MV) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | 603-38.88-7 | Abracon Corporation | RoHS : Compliant |
| 0 | |
AX7DAF1-688.7300T | Abracon Corporation | XTAL OSC XO 688.7300MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| TMJG4887GENL | Taoglas Antenna Solutions | RJ45 ICM, 1G Base-T, 1x1, Short Body, Down, 10 pin, THT, 3Wire+T, Shielded EMI Finger, LED, Industrial |
| 0 | ||
| WK8887AA1 | RAMXEED | WLAN BT Module |
| 0 | ||
| MP18871-A4CGSE-Z | Monolithic Power Systems | isolated half-bridge gate driver solution with up to a 0.5A or 4A source and sink peak RoHS : Compliant |
| 0 | ||
| 33-3887-00-1000 | Calian | GPS L1/L2+GLONASS G1/G2 + Galileo E1 + BeiDou B1/B2 |
| 0 | ||
| 33-3887-15-0300 | Calian |
| 0 | |||
 Chip-Germany GmbH | TSD-887 | Premier Magnetics | 225 | |||
 Component Electronics, Inc | CR0805F8870T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 18,900 | |
| CR21A8870FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 10,000 | ||
| RMC1/16-887K-1%-R | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 9,900 | ||
| CR0402F8872T1 | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 9,900 | ||
| RMC1/8-8872FT | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 9,000 | ||
| MF55D8872FT52 | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,650 | ||
| 9C06031A8872FKHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,500 | ||
| CR0805F8873T1 | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,400 | ||
| M8340101K8870FB | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 317 | ||
| DS17887-5 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 118 | ||
| 6588714-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 98 | ||
| 748877-2 | TE Connectivity | IN STOCK SHIP TODAY |
| 38 | ||
| RNC55H8871FS | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
CM8870PI | California Micro Devices | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| 46-288786 | G.E MEDICAL | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | CN-78-8-7 | Southco | These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit | 0 | ||
| 1887-832-N | RAF Electronic Hardware | 0 | ||||
| 5887-N-230-060-141 | RAF Electronic Hardware | WASHERS | 0 | |||
| 12SWS0887 | Essentra Components | SHOULDER WASHER, .197 ID, .408 | 0 | |||
| 09688-70514 | Avdel | HEXSERT INS M5 LP ST A27023 | 0 | |||
| 8887 | Heyco | SCBS-1500 BLACK 100' ROLL | 0 | |||
| 3887509TR-6FT | Essentra Components | THREADED ROD, 78-9 THREAD, 6 F | 0 | |||
| 12SWS0887B | Essentra Components | SHOULDER WASHER, .197 ID, .408 | 0 | |||
| 493887 | Essentra Components | 0 | ||||
| 0887-S-26 | RAF Electronic Hardware | 0 | ||||
| 495887 | Essentra Components | 21 HEAT SHRINK TRANSPARENT POL | 0 | |||
| 32887 | Pop Rivets | PTFO-1030-250 | 0 | |||
| 5887-N-234-050-165 | RAF Electronic Hardware | 0 | ||||
| FF31887A | Essentra Components | FULL FACE FLANGE PROTECTORPE F | 0 | |||
| 2288-7 | HeliCoil | 0 | ||||
 EBV Elektronik | NCV887001D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887001D1R2G) RoHS : Compliant | 5,000 | ||
| ZL88702LDG1 | Microchip Technology Inc | (Alt: ZL88702LDG1) RoHS : Compliant | 1,300 | |||
| 5962-8876801PA | Broadcom Limited | Optocoupler 3StateOUT DCIN 1CH 8Pin DIP (Alt: 5962-8876801PA) RoHS : Not Compliant | 800 | |||
| KSZ8873RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 64Pin LQFP Tray (Alt: KSZ8873RLLI) RoHS : Compliant | 160 | |||
| 5962-8876901PA | Broadcom Limited | Optocoupler LogicOut Three State DCIN 2CH 8Pin CDIP (Alt: 5962-8876901PA) RoHS : Not Compliant | 5 | |||
| MCZ33887EK | NXP Semiconductors | Integrated Hbridge with sleep mode (Alt: MCZ33887EK) RoHS : Compliant | 0 | |||
| NCV887100D1R2G | onsemi | NonSynchronous Boost Controller Automotive Grade (Alt: NCV887100D1R2G) RoHS : Compliant | 0 | |||
| 5962-8876906KFC | Broadcom Limited | Optocoupler LogicOut Three State DCIN 4CH 16Pin CFPAK (Alt: 5962-8876906KFC) RoHS : Not Compliant | 0 | |||
| 5962-8876802KPA | Broadcom Limited | Optocoupler LogicOut Three State DCIN 1CH 8Pin CDIP (Alt: 5962-8876802KPA) RoHS : Not Compliant | 0 | |||
| PIC16F18877-E/MV | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 56KB Flash 23V to 55V 40Pin UQFN Tube (Alt: PIC16F18877-E/MV) RoHS : Compliant | 0 | |||
| LAN88730AM-C-V01 | Microchip Technology Inc | Single Chip Ethernet Physical Layer Transceiver 3 V to 36 V 32 Pins VQFNEP (Alt: LAN88730AM-C-V01) RoHS : Compliant | 0 | |||
| IR3887MTRPBFAUMA1 | Infineon Technologies AG | DCDC Switching Synchronous Buck Regulator Adjustable 2 V to 17 V in 600 mV to 6 V30 A out QFN (Alt: SP001821802) RoHS : Compliant | 0 | |||
| PIC16LF18876-E/MV | Microchip Technology Inc | MCU 8Bit PIC16F PIC RISC 28KB Flash 23V to 55V 40Pin QFN Tube (Alt: PIC16LF18876-E/MV) RoHS : Compliant | 0 | |||
| E25GSFP28SRX 958873 | Intel Corporation | Intel Ethernet SFP28 SR Optic Single Pack (Alt: 958873) RoHS : Compliant | 0 | |||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
 ECCO | C10-737887-053 | Amphenol Industrial Operations |
| 19 | ||
 FDH Electronics | 88711203-01 REV B | BTC-Customer Drawing "DWG" | Circular Conn | 11 | ||
| M28876/1C1S4N | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/2B12S2 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/6A1P2 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/7B11P1 | Aptiv PLC | Connector |
| 0 | ||
| M28876/7F23P4 | Aptiv PLC | Connector Acc |
| 0 | ||
| M28876/11F2S1 | Aptiv PLC | Connector |
| 0 | ||
| M28876/2B12S4 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/6A1P4 | Aptiv PLC | Backshells & Ac |
| 0 | ||
| M28876/9F23P2 | Aptiv PLC | Connector Acc |
| 0 | ||
| 321887 | TE Connectivity | Terminals & Spl RoHS : Compliant |
| 0 | ||
| M28876/11B1P1 | Aptiv PLC | Connector Acc | 0 | |||
| M28876/1C2S5 | Aptiv PLC | Fiber Optic Con | 0 | |||
| M28876/6C1P4 | Aptiv PLC | Backshells & Ac | 0 | |||
| M28876/6C1P6N | Aptiv PLC | Backshells & Ac |
| 0 | ||
 Flip Electronics | FDMA8878-F130 | onsemi | Stock, Ship Today RoHS : Compliant | 1,337,705 | ||
| FDD8874 | onsemi | Stock, Ship Today RoHS : Compliant |
| 82,500 | ||
| FDS8876-F40 | onsemi | Stock, Ship Today RoHS : Compliant |
| 27,500 | ||
| 4888722V20 | onsemi | Stock, Ship Today |
| 22,500 | ||
| FDC8878 | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,401 | ||
| FDMA8878 | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,063 | ||
| FDS8878-F123 | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
| NCV887103D1R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
| CG8879AMT | Infineon Technologies AG | Stock | 7,500 | |||
| NCV887102D1R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| FDS8878-G | onsemi | Stock, Ship Today |
| 3,430 | ||
| FDB8870-F085 | onsemi | Stock, Ship Today RoHS : Compliant |
| 783 | ||
| FDB8870 | onsemi | Stock RoHS : Compliant | 610 | |||
| BCM88772A1KFSBG | Broadcom Limited | Stock, Ship Today |
| 33 | ||
 Maritex | WR04X8870FTL | Walsin Technology Corporation | Surface Mount Resistors; WR04X8870FTL; WALSIN; 887 ?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 6,867 | |
| WR08X8870FTL | Walsin Technology Corporation | Surface Mount Resistors; WR08X8870FTL; WALSIN; 887 ?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 4,897 | ||
| DRV8872DDAR | Texas Instruments | Motor Drivers; DRV8872DDAR; TEXAS INSTRUMENTS; 8; 6.5 V; 1.7 mm; 45 V RoHS : Compliant |
| 2,607 | ||
| NCV887100D1R2G | onsemi | DC DC Converters; NCV887100D1R2G; ON SEMICONDUCTOR; 8; Boost; 1.5 mm; 1 RoHS : Compliant |
| 1,786 | ||
DRV8873SPWPR | Texas Instruments | Motor Drivers; DRV8873SPWPR; TEXAS INSTRUMENTS; 24; 4.4 mm; 7.8 mm; 1.2 mm RoHS : Compliant |
| 1,212 | ||
| DS12C887+ | Analog Devices Inc | Real-Time Clocks (RTC ICs); DS12C887+; ANALOG DEVICES; HH:MM:SS (12/24 hr); Through Hole; 5.5 V; 4.5 V RoHS : Compliant |
| 955 | ||
| DRV8876PWPR | Texas Instruments | Motor Drivers; DRV8876PWPR; TEXAS INSTRUMENTS; 16; 4.5 V; 37 V; 3.5 A RoHS : Compliant |
| 790 | ||
| MAX8878EUK33+T | Analog Devices Inc | LDO Regulators; MAX8878EUK33+T; ANALOG DEVICES; 5; 1; 150 mA; 3.3 V RoHS : Compliant |
| 393 | ||
| FA10887_TINA-RS | LEDIL | Lens for LED high power; angle: 10 to 15 degrees FWHM; Number of LEDs: 1; Dimensions: round 16mm; Height: 9.7mm; meterial: PMMA; PC; Fastening: tape |
| 349 | ||
DRV8873HPWPRQ1 | Texas Instruments | Motor Drivers; DRV8873HPWPRQ1; TEXAS INSTRUMENTS; 24; 4.4 mm; 7.8 mm; 1.2 mm RoHS : Compliant |
| 134 | ||
BQ25887RGER | Texas Instruments | Battery Management ICs; BQ25887RGER; TEXAS INSTRUMENTS; 24; 1 mm; 4 mm; 4 mm RoHS : Compliant |
| 89 | ||
DRV8872DDARQ1 | Texas Instruments | Motor Drivers; DRV8872DDARQ1; TEXAS INSTRUMENTS; 8; 6.8 V; 45 V; 1.7 mm RoHS : Compliant |
| 40 | ||
| 5788792-1 | TE Connectivity | D-Sub Connectors; 5788792-1; TE CONNECTIVITY; D-Sub; Yes; Right Angle; 30.81 mm RoHS : Compliant |
| 26 | ||
DRV8870DDAR | Texas Instruments | Motor Drivers; DRV8870DDAR; TEXAS INSTRUMENTS; 8; 6.5 V; 45 V; 2 A RoHS : Compliant |
| 16 | ||
| MC33887APVW | NXP Semiconductors | Motor Drivers; MC33887APVW; NXP SEMICONDUCTORS; 28 V; 5 V; 5 A; 20 RoHS : Compliant |
| 9 | ||
 Master Electronics | C10-737887-053 | Amphenol Industrial Operations | RoHS : Compliant |
| 19 | |
| 9918870000 | Weidmüller Interface GmbH & Co. KG | DIGI CHECK PRO. Digital voltage tester GTIN (EAN): 4032248405756 RoHS : Compliant |
| 9 | ||
| 88761-RED-100 | Belden Inc | Shielded Twisted Pair Cable Tape Fluorinated Ethylene Propylene 2Conductors 22AWG 2.94mm 300VAC Red 30m Reel RoHS : Compliant |
| 6 | ||
| 88723-002100 | Belden Inc | RoHS : Compliant |
| 1 | ||
| CR0603AFX-8872EAS | Bourns Inc | Res Thick Film 0603 88.7K Ohm 1% 0.1W(1/10W) ±100ppm/C Sulfur Resistant Pad SMD T/R Automotive AEC-Q200 RoHS : Compliant |
| 0 | ||
| C115288-7202 | C&K Switches | RoHS : Compliant |
| 0 | ||
| C115288-7239 | C&K Switches | RoHS : Compliant |
| 0 | ||
| C115288-7446 | C&K Switches | RoHS : Compliant |
| 0 | ||
| MMSD-10-24C-L-78.87-S-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PIC16F18877-E/MV | Microchip Technology Inc | MCU 16-bit PIC16 PIC RISC 56KB Flash 3.3V 40-Pin UQFN EP Tube RoHS : Compliant |
| 0 | ||
| RN73C2A887KBTD | TE Connectivity | RN 0805 887K 0.1% 10PPM 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 936887-002 | TE Connectivity | 22759/33-26-7 RoHS : Compliant |
| 0 | ||
| 887-800 | WAGO Innovative Connections | Splicing Connector Set - L-BOXX MICRO - 2773 Series RoHS : Compliant |
| 0 | ||
| 88753-8110 | Molex | Cable Assembly USB 0.8m 28AWG 5 POS USB Mini-A to 5 POS USB Mini-B M-M Solder-Solder Bag RoHS : Compliant |
| 0 | ||
| 88764-0800 | Molex | USB-A 4 Position to Mini-B 5 Position Cable - 6.56' (2.00m) Length - Black. RoHS : Compliant |
| 0 | ||
 Neutron USA | 1088730 | Phoenix Contact | DIN Rail Terminal Blocks PTV 4-PE RoHS : Compliant |
| 50 | |
| 1887340000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks LSF-SMT 3.50/02/135 3.5SN BK RL RoHS : Compliant |
| 50 | ||
| 1788740000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 16A TSLU 1M25G RoHS : Compliant |
| 1 | ||
| 8870180000 | Weidmüller Interface GmbH & Co. KG | Industrial Relays RCI424AC4 RoHS : Compliant |
| 0 | ||
| AP8870 | APC by Schneider Electric | APC Metered Rack PDU |
| 0 | ||
| 1628871 | Phoenix Contact | Circular Metric Connectors M23-5EP198A80DNS RoHS : Compliant |
| 0 | ||
| 1887212-1 | TE Connectivity | Circular Connector XT484LC4 RoHS : Compliant |
| 0 | ||
| 2800887 | Phoenix Contact | Circuit Breakers CB TM2 10A M1 P RoHS : Compliant |
| 0 | ||
| B25647A1887K003 | TDK Corporation | Film Capacitors 880uF 1350VDC 170A 10% RoHS : Unknown |
| 0 | ||
| A8711887-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2400 ECC RDIMM FOR DELL - A8711887, SNPHNDJ7C/16G, 100% INCREASE |
| 0 | ||
| 1088739 | Phoenix Contact | Knife-disconnect terminal block, DIN Rail, 1row 2conn, 1 Potential, 24-10AWG, Push-in, PTV 4-MT RoHS : Compliant |
| 0 | ||
| 24030080010, 8128872 | HARTING Technology Group | HARTING 24030080010 Ha-VIS eCon 3080B-A - unmanaged switch with 8 RJ45 |
| 0 | ||
1823887 | Phoenix Contact | Fixed Terminal Blocks SPT-THR 1 5/ 5-H-5 0 P20 R56 RoHS : Compliant |
| 0 | ||
| 618878002030 | HARTING Technology Group | Heavy Duty Power Connectors RoHS : Compliant |
| 0 | ||
| 8870840000 | Weidmüller Interface GmbH & Co. KG | Relay Sockets & Hardware SRC-I QV P |
| 0 | ||
 Pasternack Enterprises US | PE3W08875LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Male Right Angle to Reverse Polarity SMA Male Right Angle Cable 24 Inch Length Using RG400 Coax, LF Solder., Radio frequency assembly reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our right angle reverse polarity SMA to right angle reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W08875LF-24 can also be known as a right angle reverse polarity SMA plug to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA plug cable assembly PE3W08875LF-24 is built with RG400 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency reverse polarity SMA right angle male to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse polarity right angle plug to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male right angle to reverse polarity SMA male right angle cable 24 inch length using RG400 coax, LF solder. |
| 279 | |
| PE3C8874/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL-120 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax. |
| 89 | ||
| PE3C8874/RD-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/RD-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/RD-12 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/RD-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-RD coax. |
| 89 | ||
| PE3C5887-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum N Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-150CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-150CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C8875/BR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BR-72 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-BR coax. |
| 51 | ||
| PE3C8875/VL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-VL, RF Cable Type: Belden 1855A-VL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-VL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/VL-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/VL-120 is built with Belden 1855A-VL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-VL coax. |
| 51 | ||
| PE3C8875/BK-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BK, RF Cable Type: Belden 1855A-BK, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-BK Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BK coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BK coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BK-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BK-36 is built with Belden 1855A-BK which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-BK coax. |
| 51 | ||
| PE3C8873/BR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BR, RF Cable Type: Belden 1855A-BR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-BR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/BR-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/BR-12 is built with Belden 1855A-BR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BR coax. |
| 44 | ||
| PE3C8873/WH-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/WH-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/WH-120 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-WH coax. |
| 44 | ||
| PE3W02887LF | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. QMA Male to SMB Plug Right Angle Cable Using RG316 Coax, LF Solder, RoHS. PE3W02887LF is a QMA male to SMB plug right angle cable using RG316 coax. This Pasternack QMA male to SMB plug right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMB for connector 2. QMA to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02887LF QMA male to SMB plug right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W08872/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMP Female Right Angle Cable Using RG196 Coax with HeatShrink. PE3W08872/HS is a N female bulkhead to SMP female right angle cable using RG196 coax. This Pasternack N female bulkhead to SMP female right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMP for connector 2. N to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08872/HS N female bulkhead to SMP female right angle cable assembly is constructed with RG196 coax. | 0 | |||
| PE3W16887 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-FR Coax. PE3W16887 is a N male to N male right angle cable using LMR-600-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16887 N male to N male right angle cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16887LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-600-FR Coax with HeatShrink, LF Solder. PE3W16887LF/HS is a N male to N male right angle cable using LMR-600-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16887LF/HS N male to N male right angle cable assembly is constructed with LMR-600-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18876 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Cable Using RG316 Coax. PE3W18876 is a TNC female bulkhead to SMA male right angle cable using RG316 coax. This Pasternack TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18876 TNC female bulkhead to SMA male right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C2887/HS2-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Mini SMP Female Right Angle to SMA Male Cable 48 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-48, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-48 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-48 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 48 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
 TE Connectivity | 170887-1 | TE Connectivity | SLEEVE DIA5 SHUR PLUG NAT Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Primary Product Material: Vinyl Primary Product Color: Natural Packaging Method: Bag Insulation Sleeve Straight Vinyl Natural | Insulation Boots & Sleeve | Part Number: 170887-1 | Internal Number: 170887-1 | TE Connectivity RoHS : Compliant |
| 37,470 | |
| RQ73C2A887RBTD | TE Connectivity | RQ 0805 887R 0.1% 10PPM 5K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A887RBTD | Internal Number: 8-2176379-9 | TE Connectivity RoHS : Compliant |
| 9,647 | ||
| 926887-1 | TE Connectivity | UNIV.M-N-L.PIN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Pin 20 – 14 AWG | Connector Contact | Part Number: 926887-1 | Internal Number: 926887-1 | TE Connectivity RoHS : Compliant |
| 7,240 | ||
| 8-87589-5 | TE Connectivity | 08 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 8 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 8-87589-5 | Internal Number: 8-87589-5 | TE Connectivity RoHS : Compliant |
| 5,592 | ||
| CPF0402B887RE1 | TE Connectivity | CPF 0402 887R 0.1% 25PPM 1K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0402B887RE1 | Internal Number: 4-1879214-2 | TE Connectivity RoHS : Compliant |
| 4,085 | ||
| RP73PF2A887RBTDF | TE Connectivity | RP 2A 0.25W 887R 0.1% 25PPM 1K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A887RBTDF | Internal Number: 1-2176092-3 | TE Connectivity RoHS : Compliant |
| 3,867 | ||
| 188753-4 | TE Connectivity | 31P.IEC-F MALE CONN Connector & Housing Type: Plug Connector System: Board-to-Board Termination Post & Tail Length: .114 in Termination Post & Tail Length: 2.9 mm Number of Positions: 48 Plug Board-to-Board .114" 2.9 mm | Eurocard Connector | Part Number: 188753-4 | Internal Number: 188753-4 | TE Connectivity RoHS : Compliant |
| 1,689 | ||
| 640388-7 | TE Connectivity | 07P MTA156 HDR ASSY RN STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | PCB Header & Receptacle | Part Number: 640388-7 | Internal Number: 640388-7 | TE Connectivity RoHS : Compliant |
| 1,435 | ||
| 5788796-2 | TE Connectivity | 09 HTMSFL ASSY RA 318 (IN,BL) Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Board-to-Board Board Mount | Part Number: 5788796-2 | Internal Number: 5788796-2 | 1 | TE Connectivity RoHS : Compliant |
| 1,011 | ||
RP73PF1J887RBTDF | TE Connectivity | RP 1J 0.166W 887R 0.1% 25PPM 1K RL Resistance Value: 887 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 887 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1J887RBTDF | Internal Number: 2176088-8 | TE Connectivity RoHS : Compliant |
| 976 | ||
| 1888781-1 | TE Connectivity | Cage Assy Behind Bezel QSFP Pluggable Form Factor: QSFP+ Pluggable I/O Product Type: Cage Sealable: Yes Circuit Application: Signal Number of Ports: 1 QSFP+ Cage Signal | High Speed I/o | Part Number: 1888781-1 | Internal Number: 1888781-1 | TE Connectivity RoHS : Compliant |
| 605 | ||
| 2118879-2 | TE Connectivity | PCB Ant., SMA RA, 457mm, 0.7-2.7GHz Antenna | Part Number: 2118879-2 | Internal Number: 2118879-2 | TE Connectivity RoHS : Compliant |
| 581 | ||
| 5788793-2 | TE Connectivity | 09 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5788793-2 | Internal Number: 5788793-2 | 1 | TE Connectivity RoHS : Compliant |
| 180 | ||
| 5788795-1 | TE Connectivity | 25 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 25 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 25 Plug Board-to-Board Board Mount | Part Number: 5788795-1 | Internal Number: 5788795-1 | TE Connectivity RoHS : Compliant |
| 124 | ||
| 5788793-1 | TE Connectivity | 09 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Plug Board-to-Board Board Mount | Part Number: 5788793-1 | Internal Number: 5788793-1 | TE Connectivity RoHS : Compliant |
| 20 | ||
 Teledyne HiRel | 5962-88735043C | Teledyne HiRel | PROM OTP 2K X 8 REGISTERED 25 NS | 0 | ||
5962-8875201CA | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
| 5962-8871306XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871311RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-88726093A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8873504LA | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-88752012A | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
| 5962-8875601MEA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-8870601SA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8875501EA | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-88726033A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8870201SA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
| 5962-8870301EA | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-88735023C | Teledyne HiRel | PROM OTP 2K X 8 REGISTERED 35 NS | 0 | |||
| 5962-8871302SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | CR1210-2W-8873FT | VENKEL LTD | Chip Resistor;1210;1/2W;887K ;�1% RoHS : Compliant | 0 | ||
| CR2010-2W-8874FT | VENKEL LTD | Chip Resistor;2010;1/2W;8.87M;�1% RoHS : Compliant | 0 | |||
| CRG0603-Q-8871FT | VENKEL LTD | RoHS 10/10 Green CR;0603;1/10W;8.87K;�1% RoHS : Compliant | 0 | |||
| CRG1206-T-8870FT | VENKEL LTD | RoHS 10/10 Green CR;1206;1/4W;887R;�1% RoHS : Compliant | 0 | |||
| CRG1210-U-8874FT | VENKEL LTD | RoHS 10/10 Green CR;1210;1/3W;8.87M;�1% RoHS : Compliant | 0 | |||
| CRS0805-8W-8873FT | VENKEL LTD | Anti-Sulfuration CR;0805;1/8W;887K ;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-8874FT | VENKEL LTD | Chip Resistor;0201;1/20W;8.87M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BK-8873FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�100PPM;887K;�1% RoHS : Compliant | 0 | |||
| PWCR0805-TK-8871DT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�100PPM;8.87K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-VK-8873DT | VENKEL LTD | Pulse Withstanding CR;1206;1/2W;�100PPM;887K;�0.5% RoHS : Compliant | 0 | |||
| AGCR0402-RK-8873DT | VENKEL LTD | Auto Grade Resistor;0402;1/8W;�100PPM;887K;�0.5% RoHS : Compliant | 0 | |||
| AGCR0603-QL-8874FT | VENKEL LTD | Auto Grade Resistor;0603;1/10W;�200PPM;8.87M;�1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-8870DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;887R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-8872AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;88.7K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-8870AT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;887R;�0.05% RoHS : Compliant | 0 | |||
 Vyrian | AD9887AKS-140 | Analog Devices Inc | Consumer Circuit, CMOS, PQFP160 RoHS : Not Compliant | 11,901 | ||
| DS12887+ | Analog Devices Inc | Programmable Timer, Non-Volatile, 1 Timer(s), CMOS, PDIP24 RoHS : Compliant | 11,197 | |||
| PIC16F18877-E/MV | Microchip Technology Inc | RISC Microcontroller, FLASH, PIC16 CPU, 32MHz, CMOS RoHS : Compliant | 7,999 | |||
| 5962-8873101CX | Texas Instruments | Buffer, AS Series, 6-Func, 1-Input, TTL, CDIP14 | 7,897 | |||
| 5962-8871903MYA | Analog Devices Inc | D/A Converter, 4 Func, Parallel, Word Input Loading, 10us Settling Time, CQCC44 RoHS : Not Compliant | 7,550 | |||
| AD7887ARMZ-REEL | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 7,288 | |||
| 5962-8875301LA | Texas Instruments | Registered Bus Transceiver, AS Series, 8-Func, 1-Bit, Inverted Output, TTL, CDIP24 RoHS : Not Compliant | 6,996 | |||
| 5962-8876404XX | Analog Devices Inc | ADC, Flash Method, 8-Bit, 1 Func, 8 Channel, Parallel, 8 Bits Access, CMOS, CDIP28 RoHS : Not Compliant | 6,744 | |||
| DS12CR887-33+ | Analog Devices Inc | Real Time Clock, Non-Volatile, 1 Timer(s), CMOS, PDIP24 RoHS : Compliant | 6,622 | |||
| 5962-88710012X | Texas Instruments | 5,653 | ||||
| 5962-8871001SA | Texas Instruments | 4,190 | ||||
| 5962-88731012A | Texas Instruments | Buffer, AS Series, 6-Func, 1-Input, TTL, CQCC20 RoHS : Not Compliant | 4,081 | |||
| 88753-8110 | Molex | Interconnection Device RoHS : Compliant | 721 | |||
| 88741-8700 | Molex | Rectangular Connector Adapter, 24 Contacts(Side1), 15 Contacts(Side2), Male-Female RoHS : Compliant | 576 | |||
| 88732-8502 | Molex | Cable Assembly, 5 Conductor(s), 28AWG, 30V RoHS : Compliant | 225 | |||
 Waytek, Inc. | 131887-91 | General Cable Technologies Corporation | 16GA GXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 152,500 | |
| 7100163887 | 3M | 22-18GA Female Disconnect Red Nylon .250 X .032 Fully Insulated |
| 117,377 | ||
 Win Source Electronics | DRV8876PWPR | Texas Instruments | PWR MGMT MOTOR/FAN DRIVER / H-Bridge Motor Drivers With Integrated Current Sense and Regulation RoHS : Compliant |
| 50,940 | |
| PIC16F887-I/PT | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 44TQFP / MCU 8-bit PIC RISC 14KB Flash 2.5V/3.3V/5V Automotive 44-Pin TQFP Tray RoHS : Compliant |
| 36,457 | ||
| FDS8878_F123 | Fairchild Semiconductor Corporation |
| 26,070 | |||
| NCV887100D1R2G | onsemi | IC REG CTRLR BOOST/FLYBACK 8SOIC RoHS : Compliant |
| 20,000 | ||
| DRV8872DDAR | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD / Unipolar Motor Driver NMOS PWM 8-SO PowerPad RoHS : Compliant |
| 16,340 | ||
DRV8871DDARQ1 | Texas Instruments | IC MOTOR DRVR UNIPLR 8SO PWRPAD / Unipolar Motor Driver NMOS PWM 8-SO PowerPad RoHS : Compliant |
| 10,000 | ||
| AX88772ALF | ASIX Electronics Corporation | USB 2.0 to 10/100M Fast Ethernet Controller RoHS : Compliant |
| 8,300 | ||
| MAX8887EZK33+T | Maxim Integrated Products | LDO Regulator Pos 3.3V 0.3A 5-Pin TSOT-23 T/R / IC REG LDO 3.3V 0.3A TSOT23-5 RoHS : Compliant |
| 8,139 | ||
| PIC16F18876-I/MV | Microchip Technology Inc | IC MCU 8BIT 28KB FLASH 40UQFN RoHS : Compliant |
| 6,600 | ||
| ISL88739HRZ-T | Intersil Corporation | IC BATT CHG 2 - 4 CELL 4X4 QFN / Battery Charger 32-Pin TQFN EP T/R |
| 6,100 | ||
MT8870DSR1 | Microsemi Corporation (now Microchip) | IC RECEIVER DTMF 18SOIC RoHS : Compliant |
| 5,368 | ||
| AD7887ARMZ-REEL | Analog Devices Inc | 2-Channel Single ADC SAR 125ksps 12-bit Serial 8-Pin MSOP T/R / IC ADC 12BIT 2CH SRL 8-MSOP RoHS : Compliant |
| 4,000 | ||
| AX88772BLI | ASIX Electronics Corporation | USB 2.0 to 10/100 Ethernet Controller RoHS : Compliant |
| 3,800 | ||
| DS12CR887-33+ | Maxim Integrated Products | IC RTC CLK/CALENDAR PAR 24-EDIP RoHS : Compliant |
| 2,300 | ||
| PIC16F887T-I/PT | Microchip Technology Inc | IC MCU 8BIT 14KB FLASH 44TQFP / 28/40/44-Pin, Enhanced Flash-Based 8-Bit CMOS Microcontrollers with nanoWatt Technology RoHS : Compliant |
| 2,190 | ||
 Wuhan P&S | FDD8874 | onsemi | N-Ch PowerTrench MOSFET 30V,116A,5.1m�� RoHS : Compliant |
| 350,000 | |
| NCV887740D1R2G | onsemi | Automotive Grade Start-Stop Non-Synchronous Boost Controller RoHS : Compliant |
| 2,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand