9107DG-28-AF5-R Price, Distributor, Stock

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

1219107

Essentra Components

E3-291-0712

Southco

E3-291-0712

0191070901VR

Essentra Components

E5-1-191-070

Southco

E5-1-191-071

Southco

EBV Elektronik

BCM89107B0BFBG

Broadcom Limited

Communication ICs (Alt: BCM89107B0BFBG)
RoHS : Compliant

38,640

BCM89107YC0BFBG

Broadcom Limited

BCM89107 Smart Camera MCU BroadREye Smart camera encoder (Alt: BCM89107YC0BFBG)
RoHS : Compliant

1,288

BCM89107A0BFBG

Broadcom Limited

Communication ICs (Alt: BCM89107A0BFBG)
RoHS : Compliant

BCM8910740BFBG

Broadcom Limited

Communication ICs (Alt: BCM8910740BFBG)
RoHS : Compliant

BCM89107B0BFBGT

Broadcom Limited

(Alt: BCM89107B0BFBGT)
RoHS : Compliant

PC91.07.0100A.DB

Taoglas Antenna Solutions

PCB Antenna Single Band Horizontal 902 MHz to 928 MHz Adhesive Mount (Alt: PC91.07.0100A.DB)
RoHS : Compliant

BCM89107YC0BFBGT

Broadcom Limited

AUTOMOTIVE Smart Camera with 64MB DDR (Alt: BCM89107YC0BFBGT)
RoHS : Compliant

CP19107_AMY-70-S-C2-WHT

LEDIL

(Alt: CP19107_AMY-70-S-C2-WHT)
RoHS : Compliant

Maritex

39.10.7.024.8240

FINDER SpA

Interface relay; solid-state; 1-phase; rating current 2A; input voltage 24VDC; switched voltage 240VAC; contact load capacity 2A/240VAC; screw terminals

10 : $25.195
1 : $26.7223

39.10.7.024.9024

FINDER SpA

Interface relay; solid-state; current source; rating current 6A; input voltage 24VDC; switched voltage 24VDC; contact load capacity 6A/24VDC; screw terminals

10 : $22.905
1 : $25.4498

Master Electronics

1509-107

HH Smith

Conn Banana F 1 POS Solder Lug ST Panel Mount 1 Port - Yellow
RoHS : Compliant

7,500 : $1.94
5,000 : $1.95
2,500 : $1.97
1,000 : $2.0
500 : $2.04
250 : $2.08
50 : $2.17
10 : $2.38

497

3-6609107-1

TE Connectivity

PS0SSSS6A=C1075
RoHS : Compliant

80 : $26.03
60 : $28.01
40 : $29.21
20 : $32.1
10 : $33.9
5 : $38.98
1 : $40.32

5-6609107-4

TE Connectivity

PS0SXDS3A=C1111
RoHS : Compliant

80 : $26.86
60 : $27.41
40 : $34.62
20 : $56.26
10 : $56.41
5 : $56.55
1 : $56.69

75869-107

Amphenol FCi

Quickie® Wire to Board Connector Double Row 40 Positions 2.54 mm (0.1 in.) Vertical Shrouded Header 0.76 μm (30 μin.) Gold or GXT™ Plating
RoHS : Compliant

7,500 : $1.55
5,000 : $1.6
2,500 : $1.67
1,000 : $1.79
500 : $1.87
250 : $1.95
83 : $2.05

FW-02-03-G-D-169-107

Samtec Inc

RoHS : Compliant

7,500 : $0.533
5,000 : $0.548
2,500 : $0.685
1,000 : $0.771
500 : $1.045
250 : $1.094
25 : $1.346

FW-02-03-H-D-091-078

Samtec Inc

RoHS : Compliant

7,500 : $0.883
5,000 : $0.907
2,500 : $1.151
1,000 : $1.3
500 : $1.71
250 : $1.761
100 : $1.844
25 : $2.269

FW-02-03-L-D-091-070

Samtec Inc

RoHS : Compliant

7,500 : $0.48
5,000 : $0.4931
2,500 : $0.6164
1,000 : $0.7313
500 : $0.9403
250 : $0.9844
25 : $1.2115

FW-02-03-L-D-199-107

Samtec Inc

RoHS : Compliant

7,500 : $0.48
5,000 : $0.4931
2,500 : $0.6164
1,000 : $0.7313
500 : $0.9403
250 : $0.9844
25 : $1.2115

FW-02-03-S-D-219-107

Samtec Inc

RoHS : Compliant

7,500 : $0.573
5,000 : $0.589
2,500 : $0.726
1,000 : $0.814
500 : $1.104
250 : $1.156
25 : $1.423

KL319107

American Electrical Inc

PIK 4 N FT Double Deck Terminal Blk Orange 300V 32A 26-10 AWG - screw clamp
RoHS : Compliant

10,000 : $1.63
7,500 : $1.64
5,000 : $1.65
2,500 : $1.69
1,000 : $1.74
500 : $1.84
300 : $1.9
100 : $1.98

51191-0700

Molex

Conn Housing F 7 POS 2.5mm Crimp ST Cable Mount Natural Bag
RoHS : Compliant

25,000 : $0.1408
20,000 : $0.1479
7,900 : $0.1499
4,000 : $0.152
2,000 : $0.1571
400 : $0.1591

2326910-7

TE Connectivity

MOQ Reduction
RoHS : Compliant

78,000 : $0.1347
58,500 : $0.1374
39,000 : $0.1999
19,500 : $0.3787

FW-02-03-FM-D-239-107

Samtec Inc

RoHS : Compliant

7,500 : $0.4236
5,000 : $0.4247
2,500 : $0.5571
1,000 : $0.6269
500 : $0.806
250 : $0.8438
25 : $1.0385

FW-02-03-H-D-229-107

Samtec Inc

RoHS : Compliant

7,500 : $0.883
5,000 : $0.907
2,500 : $1.151
1,000 : $1.3
500 : $1.71
250 : $1.761
100 : $1.844
25 : $2.269

FW-02-03-L-D-089-107

Samtec Inc

RoHS : Compliant

7,500 : $0.48
5,000 : $0.4931
2,500 : $0.6164
1,000 : $0.7313
500 : $0.9403
250 : $0.9844
25 : $1.2115

Pasternack Enterprises US

PE39107LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assembly has plug gender on end 1 and jack on end 2. PE39107LF can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39107LF is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39107LF RF cable are available on our downloadable PDF datasheet.PE39107LF can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

570

PE39107LF-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assembly has plug gender on end 1 and jack on end 2. PE39107LF-48 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39107LF-48 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39107LF-48 RF cable are available on our downloadable PDF datasheet.PE39107LF-48 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $186.99
25 : $177.64
50 : $168.29
100 : $160.81

114

PE39107LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assembly has plug gender on end 1 and jack on end 2. PE39107LF-12 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39107LF-12 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39107LF-12 RF cable are available on our downloadable PDF datasheet.PE39107LF-12 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

114

PE39107LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assembly has plug gender on end 1 and jack on end 2. PE39107LF-24 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39107LF-24 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39107LF-24 RF cable are available on our downloadable PDF datasheet.PE39107LF-24 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

114

PE39107LF-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 60 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assembly has plug gender on end 1 and jack on end 2. PE39107LF-60 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE39107LF-60 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39107LF-60 RF cable are available on our downloadable PDF datasheet.PE39107LF-60 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $196.99
25 : $187.14
50 : $177.29
100 : $169.41

114

PE91073

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 8 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: Bulkhead, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. TNC Female to SMP Male Limited Detent Bulkhead Mount Adapter. TNC adapter PE91073 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our TNC to SMP adapter is a between series coaxial adapter design. This 50 Ohm TNC adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 8 GHz. TNC female to SMP male adapter is one of the many RF components that ship same day as they are ordered. PE91073 female TNC to male SMP adapter has a straight body. This Pasternack straight TNC coax adapter is a in-line RF adapter. Our female TNC to male SMP adapter PE91073 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This TNC to SMP radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $481.99
10 : $462.71
25 : $443.43

107

PE91070

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Radius Right Angle, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None. 2.92mm Male to 2.92mm Female Radius Right Angle Adapter, Up To 40 GHz. 2.92mm adapter PE91070 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 2.92mm to 2.92mm adapter is a between series coaxial adapter design. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm male to 2.92mm female adapter is one of the many RF components that ship same day as they are ordered. PE91070 male 2.92mm to female 2.92mm adapter has a radius right angle body. This Pasternack radius right angle 2.92mm coax adapter is a 90 degree swept elbow adapter. Our male 2.92mm to female 2.92mm adapter PE91070 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This up to 40 GHz 2.92mm to 2.92mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $556.99
10 : $545.85
25 : $534.71

PE91077

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: ZMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Precision SMA Female to ZMA Jack Adapter, 4 Lug. SMA adapter PE91077 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to ZMA adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to ZMA jack adapter is one of the many RF components that ship same day as they are ordered. PE91077 female SMA to jack ZMA adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to jack ZMA adapter PE91077 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 4 lug SMA to ZMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $256.99
10 : $246.71
25 : $236.43
100 : $226.15

PE91072

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. SMP Female to SMP Female Adapter, Up to 8 GHz, .370 inch Special Length. SMP adapter PE91072 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMP to SMP adapter is a in-series coaxial adapter design. This 50 Ohm SMP adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. SMP female to SMP female adapter is one of the many RF components that ship same day as they are ordered. PE91072 female SMP to female SMP adapter has a straight body. This Pasternack straight SMP coax adapter is a in-line RF adapter. Our female SMP to female SMP adapter PE91072 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This up to 8 GHz, .370 inch special length SMP to SMP radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $8.76
25 : $8.32
50 : $7.88
100 : $7.53

PE91076

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: ZMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None. Precision SMA Male to ZMA Jack Adapter, 3 Lug. SMA adapter PE91076 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to ZMA adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA male to ZMA jack adapter is one of the many RF components that ship same day as they are ordered. PE91076 male SMA to jack ZMA adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our male SMA to jack ZMA adapter PE91076 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 3 lug SMA to ZMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $256.99
10 : $246.71
25 : $236.43
100 : $226.15

PE91074

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: ZMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Precision SMA Female to ZMA Jack Adapter, 3 Lug. SMA adapter PE91074 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to ZMA adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to ZMA jack adapter is one of the many RF components that ship same day as they are ordered. PE91074 female SMA to jack ZMA adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to jack ZMA adapter PE91074 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 3 lug SMA to ZMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $241.99
10 : $232.31
25 : $222.63
100 : $212.95

PE39107

Pasternack Enterprises

PE3W09107

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Female to BNC Male Right Angle Cable Using RG316-DS Coax. PE3W09107 is a reverse polarity BNC female to BNC male right angle cable using RG316-DS coax. This Pasternack reverse polarity BNC female to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female BNC to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09107 BNC reverse polarity female to BNC male right angle cable assembly is constructed with RG316-DS coax.

PE3W19107

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using TCOM-240 Coax. PE3W19107 is a SMA male to BNC male cable using TCOM-240 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19107 SMA male to BNC male cable assembly is constructed with TCOM-240 coax.

PE3C9107

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to QMA Male Right Angle Cable Using PE-SR405AL Coax. PE3C9107 is a QMA male right angle to QMA male right angle cable using PE-SR405AL coax. This Pasternack QMA male right angle to QMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. QMA right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male QMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9107 QMA male right angle to QMA male right angle cable assembly is constructed with PE-SR405AL coax.