950L-50-S08-R Price, Distributor, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male to QMA Male Right Angle Cable 50 cm Using LMR-240-UF Coax., Radio frequency assembly N male to QMA male right angle cable 50 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to QMA male right angle cable 50 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle QMA cable connection on the other. Our low loss type N to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This type N to QMA cable is a male to male coax assembly, PE3W08119-50CM, can also be known as a low loss type N plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to QMA plug cable assembly PE3W08119-50CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08119-50CM can also be used in the other direction and will be right angle QMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QMA male right angle cable 50 cm using LMR-240-UF coax.

1 : $77.09
25 : $73.24
50 : $69.38
100 : $66.3

100

PE3C7619-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 19.68 inches.

1 : $254.99
25 : $242.24
50 : $229.49
100 : $219.29

PE3W02209-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. Black FAKRA Jack to FAKRA Jack Cable 50 CM Length Using RG188-DS Coax., Radio frequency assembly black FAKRA jack to FAKRA jack cable 50 cm length using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Black FAKRA jack to FAKRA jack cable 50 cm length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE3W02209-50CM, can also be known as a FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE3W02209-50CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA jack to FAKRA jack cable 50 cm length using RG188-DS coax.

1 : $42.19
25 : $40.08
50 : $37.97
100 : $36.28

PE3C8519-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length: 7 inches. Plenum 7/16 DIN Male to 7/16 DIN Female Cable Using SPP-375-LLPL Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN female cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN female cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8519-50CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C8519-50CM is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8519-50CM can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN female cable using SPP-375-LLPL coax using Times Microwave parts in 50 CM.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

PE7395-0

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.6:1, Attenuation: 0 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 0 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 2 Watts Up to 40 GHz. PE7395-0 is a fixed 0 dB attenuator from Pasternack. This 0dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7395-0 0 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7395-0 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 0dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Compliant

1 : $415.99
10 : $399.35
25 : $382.71

PE3C9502-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 48 inches. SHV Jack to SHV Jack Bulkhead Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9502-48 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9502-48 is built with RG142 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9502-48 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 48 inch length using RG142 coax.

1 : $186.99
25 : $177.64
50 : $168.29
100 : $160.81

PE3C5879-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Female Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to SMA cable is a male to female coax assembly, PE3C5879-50CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA jack cable assembly PE3C5879-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5879-50CM can also be used in the other direction and will be SMA female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

PE3C5950-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.1/9.5 Mini DIN Male Right Angle to 4.3-10 Female Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C5950-12, can also be known as a low PIM right angle 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C5950-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with right angle 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5950-12 can also be used in the other direction and will be 4.3-10 female to right angle 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male right angle to 4.3-10 female low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder.

1 : $194.99
25 : $185.24
50 : $175.49
100 : $167.69

PE3C9508-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SHV Plug Right Angle to SHV Plug Right Angle Cable 60 Inch Length Using RG316 Coax., Radio frequency assembly SHV plug right angle to SHV plug right angle cable 60 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug right angle to SHV plug right angle cable 60 inch length using RG316 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SHV cable connection on one end and right angle SHV cable connection on the other. Our right angle SHV to right angle SHV cable assemblies have a plug gender on end 1 and plug on end 2. PE3C9508-60 can also be known as a right angle SHV male to right angle SHV male cable assembly and will be shipped same-day as it is purchased. SHV male to SHV male cable assembly PE3C9508-60 is built with RG316 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with right angle SHV to right angle SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV right angle plug to SHV right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV right angle male to SHV right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug right angle to SHV plug right angle cable 60 inch length using RG316 coax.

1 : $239.99
25 : $227.99
50 : $215.99
100 : $206.39

PE3W09503/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMA Female 2 Hole Flange Cable Using PE-047SR Coax with HeatShrink. PE3W09503/HS is a Mini SMP female to SMA female 2 hole flange cable using PE-047SR coax. This Pasternack Mini SMP female to SMA female 2 hole flange cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female Mini SMP to female SMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09503/HS Mini SMP female to SMA female 2 hole flange cable assembly is constructed with PE-047SR coax.

PE3W18950

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. UHF Male to N Male Cable Using LMR-400-DB Coax. PE3W18950 is a UHF male to N male cable using LMR-400-DB coax. This Pasternack UHF male to N male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18950 UHF male to N male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W19508

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to 4.3-10 Male Right Angle Cable Using TFT-5G-402 Coax. PE3W19508 is a SMA male right angle to 4.3-10 male right angle cable using TFT-5G-402 coax. This Pasternack SMA male right angle to 4.3-10 male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. SMA right angle to 4.3-10 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male 4.3-10 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19508 SMA male right angle to 4.3-10 male right angle cable assembly is constructed with TFT-5G-402 coax.

PE3C6229-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum Snap-On 4.3-10 Male to 4.3-10 Female Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to 4.3-10 female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to 4.3-10 female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-4310F-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable is a male to female coax assembly, PE3C6229-50CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly PE3C6229-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-4310F-LP 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6229-50CM can also be used in the other direction and will be TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310F-LP 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310F-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to 4.3-10 female low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3C9507-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 12 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable 12 inch length using RG223 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9507-12 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9507-12 is built with RG223 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable 12 inch length using RG223 coax.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3W05950

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Right Angle Cable Using PE-SR402FL Coax. PE3W05950 is a BNC male to SMA male right angle cable using PE-SR402FL coax. This Pasternack BNC male to SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W05950 BNC male to SMA male right angle cable assembly is constructed with PE-SR402FL coax.

Teledyne HiRel

5962-8995001MFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-8769501RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8995001B2A

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-8950602KA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-87695012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8950602LA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-8950601KA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-8950601LA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-8995001BFA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-89506023A

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-8995001BEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-8769501SA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8995001MEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-8995001M2A

Teledyne HiRel

FLIP-FLOP, JK, DUAL, NEGATIVE EDGE-TRIGGERED, WITH ASYNCHRONOUS SET AND CLEAR
RoHS : Not Compliant

5962-89506013A

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

Vyrian

54242-105260950LF

Amphenol Communications Solutions

Board Stacking Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle

17,611

256-402/000-009/999-950

WAGO Innovative Connections

Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,908

3063950

Phoenix Contact

Power Cords/Plugs
RoHS : Compliant

11,002

950

Analog Devices Inc

10,902

ST95040WM3TR

STMicroelectronics

9,805

W1202-495033/AFBR-395050RBZ

Broadcom Limited

8,078

MAX77950EWW-T

Analog Devices (Maxim Integrated)

7,837

W1202-495033/1X2 NIR20 SIPM SMD

Broadcom Limited

6,424

L5950

STMicroelectronics

Fixed Positive LDO Regulator, 5 Output, 10V1, 8.5V2, PZFM15
RoHS : Compliant

5,705

MAX9502GELT

Analog Devices Inc

5,553

W1192-495033

Broadcom Limited

5,513

BDP950E6327HTSA1

Infineon Technologies AG

RF Power Bipolar Transistor, 1-Element, Silicon, PNP
RoHS : Compliant

4,669

CD8069504384601S-RGLN

Intel Corporation

3,411

0495025TXA

Littelfuse Inc

Electric Fuse
RoHS : Unknown

1,046

0895020TXN

Littelfuse Inc

Electric Fuse, 20A, 58VDC, 1000A (IR), Inline/holder

1,020

Waytek, Inc.

0695015.PXPS

Littelfuse Inc

MCase+ 32VDC Slotted 15A
RoHS : Compliant

10 : $1.2362
50 : $1.1919
100 : $1.1513
200 : $1.0922
500 : $1.0553
1,000 : $1.0184

9,516

0695025.PXPS

Littelfuse Inc

MCase+ 32VDC Slotted 25A
RoHS : Compliant

10 : $1.367
50 : $1.2646
100 : $1.1484
200 : $1.1041
500 : $1.0626
1,000 : $1.0211

5,830

99502-P1000

FTZ Industries

1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated

10 : $0.5759
2 : $0.5446
5 : $0.5258
10 : $0.5039
20 : $0.4852

3,122

0495060.ZXA

Littelfuse Inc

60A Cartridge Style Fuse Yellow JCase FMX 32V
RoHS : Compliant

1 : $1.2958
10 : $1.213
50 : $1.184
100 : $1.1178
200 : $1.035
500 : $0.9191

2,900

0495025.ZXA

Littelfuse Inc

25A Cartridge Style Fuse White JCase FMX 32V
RoHS : Compliant

1 : $1.2814
10 : $1.1996
50 : $1.1709
100 : $1.1054
200 : $1.0235
500 : $0.9088

2,886

0695050.PXPS

Littelfuse Inc

MCase+ 32VDC Slotted 50A
RoHS : Compliant

10 : $1.6508
50 : $1.5271
100 : $1.3868
200 : $1.3333
500 : $1.2832
1,000 : $1.2331

2,482

0695030

Littelfuse Inc

30A MCase Pink Fuse 32V LIKE BUSSMANN FMM

10 : $1.3471
50 : $1.2462
100 : $1.1317
200 : $1.088
500 : $1.0471
1,000 : $1.0062

1,927

0695015.PXP

Littelfuse Inc

15A MCase Gray Fuse 32V LIKE BUSSMANN FMM
RoHS : Compliant

10 : $1.4786
50 : $1.3679
100 : $1.2421
200 : $1.1942
500 : $1.1494
1,000 : $1.1045

1,909

0695040

Littelfuse Inc

40A MCase Green Fuse 32V LIKE BUSSMANN FMM

10 : $1.3471
50 : $1.2462
100 : $1.1317
200 : $1.088
500 : $1.0471
1,000 : $1.0062

1,845

55809506

Southwire Company LLC

12/4 SOOW Service Cord Blk Wht Grn Rd Conductors disc way, no repl

250 : $2.6503
2,500 : $2.317

1,750

0695025

Littelfuse Inc

25A MCase White Fuse 32V LIKE BUSSMANN FMM

10 : $1.8411
50 : $1.7032
100 : $1.5467
200 : $1.487
500 : $1.4312
1,000 : $1.3752

1,242

0695020

Littelfuse Inc

20A MCase Blue Fuse 32V LIKE BUSSMANN FMM

10 : $1.3471
50 : $1.2462
100 : $1.1317
200 : $1.088
500 : $1.0471
1,000 : $1.0062

560

95060-29

Cole Hersee

Cole Hersee 95060-29 sealed ignition switch is a 2-position Off-On switch rated 10A ignition and 5A start at 12VDC. It features an M22 x 1.5 mounting stem, Deutsch DT06-6S mating connector compatibility, IP67 sealing, and SAE J259 ignition protection.

1 : $55.46
5 : $49.52
10 : $46.22
50 : $43.58
100 : $41.59
200 : $39.61

624 950 3 023 RT

Rennsteig Tools Inc

Crimp Die Set for MCP 1.5mm Comes w/ Locator & Spare Parts Crimp Terminal 30151 & 30152

1 : $338.79
10 : $320.47

0495030.ZXA

Littelfuse Inc

30A Cartridge Style Fuse Pink JCase FMX 32V
RoHS : Compliant

1 : $1.6561
10 : $1.5924
50 : $1.5367
100 : $1.461
200 : $1.2859
500 : $1.2421

Win Source Electronics

LP2950ACDT-5RKG

onsemi

IC REG LDO 5V 0.1A DPAK
RoHS : Compliant

1,975 : $0.152
1,475 : $0.1695
1,145 : $0.1753
830 : $0.1812
535 : $0.187
220 : $0.2279

100,000

LP2950CDT-5.0RK

onsemi

100 mA, Low Power Low Dropout Voltage Regulator | IC REG LINEAR 5V 100MA DPAK
RoHS : Not Compliant

2,300 : $0.1305
1,845 : $0.1358
1,420 : $0.1411
990 : $0.1517
640 : $0.157
300 : $0.1676

97,720

LP2950CDT-3.3

onsemi

Micropower Voltage Regulators | IC REG LINEAR 3.3V 100MA DPAK
RoHS : Not Compliant

750 : $0.5174
600 : $0.5394
465 : $0.5615
325 : $0.6041
210 : $0.6261
100 : $0.6688

39,600

M95040-WMN6TP/S

STMicroelectronics

4 Kbit, 2 Kbit and 1 Kbit Serial SPI bus EEPROM with high speed Clock

1,010 : $0.2982
810 : $0.3104
625 : $0.3225
435 : $0.3467
280 : $0.3588
135 : $0.3831

29,750

LAN9500AI-ABZJ

Microchip Technology Inc

USB 2.0 to 10/100 Ethernet Controller Promiscuous mode | IC USB 2.0-10/100 ETH CRTL 56QFN
RoHS : Compliant

100 : $3.0046
80 : $3.1268
62 : $3.2489
43 : $3.4932
28 : $3.6153
13 : $3.8596

18,344

MAX6950EEE+

Maxim Integrated Products

IC DRVR 7 SEGMNT 5 DIGIT 16QSOP
RoHS : Compliant

14 : $22.6516
10 : $25.2652
8 : $26.1364
6 : $27.0076
4 : $27.8788
2 : $33.9773

17,391

LP2950CDT-3.3/NOPB

Texas Instruments

LP2950-N/LP2951-N Series of Adjustable Micropower Voltage Regulators
RoHS : Compliant

470 : $0.6413
350 : $0.7152
275 : $0.7399
200 : $0.7646
130 : $0.7892
55 : $0.9619

10,000

ISL29501IRZ-T7

Renesas Electronics Corporation

IC SIGNAL PROCESSOR TOF 24QFN
RoHS : Compliant

54 : $5.591
43 : $5.8182
34 : $6.0455
24 : $6.5001
15 : $6.7273
7 : $7.1819

9,310

TPS76950QDBVRG4Q1

Texas Instruments

IC REG LDO 5V 0.1A SOT23-5
RoHS : Compliant

375 : $0.8044
280 : $0.8972
220 : $0.9282
160 : $0.9591
105 : $0.9901
45 : $1.2066

9,000

LTC2950CTS8-2#TRMPBF

Linear Technology

IC PB ON/OFF CONTROLLER TSOT23-8 / Controller 2.7V to 26.4V 8-Pin TSOT-23 T/R
RoHS : Compliant

77 : $3.9394
57 : $4.394
44 : $4.5455
32 : $4.697
21 : $4.8485
9 : $5.9091

5,220

LTC2950ITS8-1#TRPBF

Linear Technology

IC PB ON/OFF CONTROLLER TSOT23-8
RoHS : Compliant

63 : $4.8164
47 : $5.3721
36 : $5.5573
27 : $5.7426
17 : $5.9278
7 : $7.2245

4,550

TPS65950A3ZXNR

Texas Instruments

IC PWR MGMT 11 LDO TXRX 209NFBGA
RoHS : Compliant

38 : $7.9367
29 : $8.8524
22 : $9.1577
16 : $9.4629
11 : $9.7682
5 : $11.905

3,030

CVHD-950X-100.000

Crystek Corporation

VCXO Oscillators 100MHz LOW PHASE

9 : $35.188
7 : $39.2482
5 : $40.6016
4 : $41.9549
3 : $43.3083
1 : $52.782

770

LM2950-5.0

HTC Korea

2,095 : $0.1432
1,570 : $0.1597
1,210 : $0.1653
880 : $0.1708
570 : $0.1763
235 : $0.2148

655

PTCCL05H950HBE

Vishay Huntington

PTC RESET FUSE 265V 95MA RADIAL / Ceramic PTC Resettable Fuse 265V 95 mA Ih Through Hole Radial, Disc

420 : $0.7182
315 : $0.8011
245 : $0.8287
180 : $0.8563
115 : $0.8839
50 : $1.0773

340

Wuhan P&S

NTCALUGE4C95005A

Vishay Intertechnologies

NTC LUG85A 10K 2% 3435K G24 UL A

1 : $8.74
100 : $2.92
500 : $2.7
1,000 : $2.63

78,000

950L-50-S08-R Distributor

Link URL