A6311MI3JB-T Price, Distributor, Stock

Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 2.6 GHz, Frequency, Max: 3.1 GHz, Noise Figure, Max: 1.6 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 2.6 GHz to 3.1 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63008 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2.6 GHz and maximum frequency of 3.1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.6 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63008 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $684.99
5 : $657.59
10 : $630.19

PE15A63016

Pasternack Enterprises

1 : $1,290.0
5 : $1,238.4
10 : $1,186.8
25 : $1,135.2

PE15A63026

Pasternack Enterprises

Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 40 GHz, Gain, Min: 26 dB, Gain, Typical: 29 dB, 3rd Intercept Point: 30 dB, Connector Series: 2.92mm. 29 dB Gain, 20 dBm P1dB, 0.01 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 5 dB Noise Figure, 2.92mm. The PE15A63026 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 40 GHz. The PE15A63026 broadband amplifier has 1.9:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 29 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 26 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63026 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -50 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $22,800.0
5 : $21,888.0
10 : $20,976.0
25 : $20,064.0

PE15A63025

Pasternack Enterprises

Key Specifications, Power Output: 1 Watt (30 dBm) Psat, Frequency, Min: 10 MHz, Frequency, Max: 30 GHz, Gain, Min: 32 dB, Gain, Typical: 38 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 35 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2.2:1, Connector Series: 2.92mm. 38 dB Gain, 27 dBm P1dB, 0.01 GHz to 30 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, 2.92mm. The PE15A63025 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 30 GHz. The PE15A63025 broadband amplifier has 1.4:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 38 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 32 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63025 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 27 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 30 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $19,800.0
5 : $19,008.0
10 : $18,216.0
25 : $17,424.0

PE15A63022

Pasternack Enterprises

Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Gain, Min: 33 dB, Gain, Typical: 36 dB, Noise Figure, Max: 2.5 dB, 3rd Intercept Point: 36 dB, Connector Series: SMA. 36 dB Gain, 21 dBm P1dB, 0.01 GHz to 3 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/240VAC, 2.5 dB Noise Figure, SMA. The PE15A63022 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The PE15A63022 broadband amplifier has 1.7:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 2.5 dB with a typical gain of 36 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/240 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 33 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63022 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 21 dB of typical 1dB compression point and 1.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -55 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $5,150.0
5 : $4,944.0
10 : $4,738.0
25 : $4,532.0

PE15A63031

Pasternack Enterprises

Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 500 MHz, Frequency, Max: 40 GHz, Gain, Min: 37 dB, Gain, Typical: 44 dB, 3rd Intercept Point: 25 dB, Connector Series: 2.92mm. 44 dB Gain, 20 dBm P1dB, 0.5 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 4.5 dB Noise Figure, 2.92mm. The PE15A63031 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 500 MHz and maximum frequency of 40 GHz. The PE15A63031 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 44 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 3 dB typical gain flatness along with 37 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63031 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 4.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $22,200.0
5 : $21,312.0
10 : $20,424.0
25 : $19,536.0

PE15A63027

Pasternack Enterprises

Key Specifications, Power Output: 27 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 6 GHz, Gain, Min: 28 dB, Gain, Typical: 30 dB, Noise Figure, Max: 4.5 dB, 3rd Intercept Point: 36 dB, RF Input VSWR Max: 3:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 30 dB Gain, 25 dBm P1dB, 0.1 GHz to 6 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, SMA. The PE15A63027 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 6 GHz. The PE15A63027 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4.5 dB with a typical gain of 30 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 28 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63027 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 25 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 27 dBm of typical saturated output power along with typical reverse isolation of -60 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $11,200.0
5 : $10,752.0
10 : $10,304.0
25 : $9,856.0

PE15A63028

Pasternack Enterprises

Key Specifications, Power Output: 19 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 18 GHz, Gain, Min: 38 dB, Gain, Typical: 42 dB, Noise Figure, Max: 4 dB, 3rd Intercept Point: 27 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 42 dB Gain, 16 dBm P1dB, 0.1 GHz to 18 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 2.2 dB Noise Figure, SMA. The PE15A63028 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 18 GHz. The PE15A63028 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4 dB with a typical gain of 42 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 38 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63028 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 16 dB of typical 1dB compression point and 2.2 dBm of typical RF input power. The AC powered broadband amplifier is rated for 19 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $11,600.0
5 : $11,136.0
10 : $10,672.0
25 : $10,208.0

PE15A63004

Pasternack Enterprises

Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63004 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63004 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,110.0
5 : $1,065.6
10 : $1,021.2

PE15A63024

Pasternack Enterprises

Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 20 GHz, Gain, Min: 26 dB, Gain, Typical: 29 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 29 dB, Connector Series: SMA. 29 dB Gain, 22 dBm P1dB, 0.01 GHz to 20 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.5 dB Noise Figure, SMA. The PE15A63024 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 20 GHz. The PE15A63024 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 29 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 26 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63024 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 22 dB of typical 1dB compression point and 3.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -65 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $14,400.0
5 : $13,824.0
10 : $13,248.0
25 : $12,672.0

PE15A63023

Pasternack Enterprises

Key Specifications, Power Output: 18 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3.5 GHz, Gain, Min: 58 dB, Gain, Typical: 62 dB, Noise Figure, Max: 1.5 dB, 3rd Intercept Point: 26 dB, Connector Series: SMA. 62 dB Gain, 17 dBm P1dB, 0.01 GHz to 3.5 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 1.3 dB Noise Figure, SMA. The PE15A63023 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3.5 GHz. The PE15A63023 broadband amplifier has 2.2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 1.5 dB with a typical gain of 62 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 58 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63023 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 17 dB of typical 1dB compression point and 1.3 dBm of typical RF input power. The AC powered broadband amplifier is rated for 18 dBm of typical saturated output power along with typical reverse isolation of -75 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $8,390.0
5 : $8,054.4
10 : $7,718.8
25 : $7,383.2

PE15A63019

Pasternack Enterprises

1 : $1,440.0
5 : $1,382.4
10 : $1,324.8
25 : $1,267.2

PE15A63010

Pasternack Enterprises

Key Specifications, Gain: 28 dB, Power Output: 8 dBm P1dB, Frequency, Min: 3.1 GHz, Frequency, Max: 3.5 GHz, Noise Figure, Max: 1 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 55 mA, Connector Series: SMA. 0.8 dB NF Input Protected Low Noise Amplifier, Operating from 3.1 GHz to 3.5 GHz with 28 dB Gain, 8 dBm P1dB and SMA. PE15A63010 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 3.1 GHz and maximum frequency of 3.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1 dB with a typical gain of 28 dB. input protected LNA amplifier PE15A63010 is rated at 15 Volts DC maximum and 55 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $700.99
5 : $672.95
10 : $644.91

PE15A63011

Pasternack Enterprises

Key Specifications, Gain: 35 dB, Power Output: 13 dBm P1dB, Frequency, Min: 3.1 GHz, Frequency, Max: 3.5 GHz, Noise Figure, Max: 1 dB, Design: Input Protected Low Noise, Connector Series: SMA. 0.85 dB NF Input Protected Low Noise Amplifier, Operating from 3.1 GHz to 3.5 GHz with 35 dB Gain, 13 dBm P1dB and SMA. PE15A63011 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 3.1 GHz and maximum frequency of 3.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1 dB with a typical gain of 35 dB. input protected LNA amplifier PE15A63011 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $700.99
5 : $672.95
10 : $644.91

PE15A63005

Pasternack Enterprises

Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63005 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63005 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $652.99
5 : $626.87
10 : $600.75

TE Connectivity

RQ73C2A63K4BTD

TE Connectivity

RQ 0805 63K4 0.1% 10PPM 5K RL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A63K4BTD | Internal Number: 6-2176381-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79

16,841

RP73PF2A634RBTDF

TE Connectivity

RP 2A 0.25W 634R 0.1% 25PPM 1K RL Resistance Value: 634 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 634 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A634RBTDF | Internal Number: 9-2176091-9 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

856

RP73PF2A63R4BTDF

TE Connectivity

RP 2A 0.25W 63R4 0.1% 25PPM 1K RL Resistance Value: 63.4 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A63R4BTDF | Internal Number: 2176091-5 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

388

RN73C2A63K4BTDF

TE Connectivity

RN 0805 63K4 0.1% 10PPM 1KRL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A63K4BTDF | Internal Number: 1676399-2 | TE Connectivity
RoHS : Compliant

500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2

109

YHVA630-2PHM-6MM-A

TE Connectivity

HVA630-2phm,6sqmm,Key A Cable Assembly (End A): HVA630 Plug Operating Voltage: 850 VDC Cable Assembly Configuration: Single Ended Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F HVA630 Plug 850 VDC | Electric & Hybrid & Fuel Cell Cable Assembly | Part Number: YHVA630-2PHM-6MM-A | Internal Number: YHVA630-2PHM-6MM-A | TE Connectivity
RoHS : Compliant

1 : $62.38

Win Source Electronics

MGA-633P8-TR1G

Broadcom Limited

IC LNA ULTRA LOW NOISE ACT BIAS
RoHS : Compliant

295 : $1.0173
240 : $1.0587
185 : $1.1
130 : $1.1828
85 : $1.2241
40 : $1.3068

194,490

GVA-63+

Mini-Circuits

IC RF AMP CATV 10MHZ-6GHZ SOT89
RoHS : Compliant

270 : $1.1182
215 : $1.1637
170 : $1.2091
120 : $1.3
75 : $1.3455
35 : $1.4364

50,985

QCA-6391-0-NSP265-TR-02-0

Qualcomm

HF-TR-QCA6391-1-NSP265-02

41 : $8.2863
33 : $8.6232
25 : $8.96
18 : $9.6338
12 : $9.9706
6 : $10.6443

40,000

MMBTA63LT1G

onsemi

TRANS PNP DARL 30V 0.5A SOT23
RoHS : Compliant

5,080 : $0.0591
3,790 : $0.066
2,935 : $0.0682
2,130 : $0.0705
1,375 : $0.0728
565 : $0.0887

37,656

88EA6321A0-TFJ2A000

Infineon Technologies AG

Infineon SWITCHES

36 : $9.392
27 : $10.4757
21 : $10.8369
16 : $11.1982
10 : $11.5594
4 : $14.088

35,050

MMBTA63LT1

onsemi

TRANS SS DARL PNP 30V SOT23 / Bipolar (BJT) Transistor
RoHS : Not Compliant

3,270 : $0.1028
2,620 : $0.1071
2,015 : $0.1112
1,405 : $0.1196
905 : $0.1238
425 : $0.1322

30,000

MGA-637P8-TR1G

Broadcom Limited

RF Amp Single LNA 2.5GHz 5.5V 8-Pin DFN EP T/R / High Linearity Low Noise Amplifi er | IC AMP CDMA 450MHZ-1.5GHZ 8DFN
RoHS : Compliant

80 : $4.8788
64 : $5.082
49 : $5.2853
35 : $5.6918
22 : $5.8952
11 : $6.3017

24,800

TS5A63157DBVR

Texas Instruments

IC SWITCH SPDT SOT23-6
RoHS : Compliant

665 : $0.4531
495 : $0.5054
385 : $0.5228
280 : $0.5402
180 : $0.5576
75 : $0.6796

5,320

SDINBDA6-32G-ZA1

Western Digital Corp

32GB eMMC iNAND AT EM132 Grade2 v5.1 HS400

5 : $61.1
4 : $68.15
3 : $70.5
2 : $72.85
1 : $75.2

3,040

SDINBDA6-32G

Diodes Incorporated

32GB eMMC iNAND CL EM132

6 : $51.7895
5 : $53.8948
4 : $56.0
3 : $60.2106
2 : $62.3158
1 : $66.5264

3,040

SDINBDA6-32G-XI1

Diodes Incorporated

32GB eMMC iNAND IX EM132 ExtTemp

6 : $55.9091
5 : $58.1819
4 : $60.4546
3 : $65.0001
2 : $67.2728
1 : $71.8182

3,000

OPA637AU/2K5

Texas Instruments

IC OPAMP GP 80MHZ 8SOIC
RoHS : Compliant

10 : $32.4915
7 : $36.2405
6 : $37.4901
4 : $38.7398
3 : $39.9895
2 : $48.7372

2,500

EMZA630ADA101MJA0G

United Chemi-Con Inc

CAP ALUM 100UF 20% 63V SMD

1,550 : $0.2174
1,155 : $0.2425
895 : $0.2508
650 : $0.2592
420 : $0.2676
175 : $0.326

1,770

88EA6352A1-TFJ2A000

Infineon Technologies AG

88EA6352A1-TFJ2A000 Infineon Technologies Infineon SWITCHES datasheet, inventory, & pricing.

8 : $43.4627
6 : $48.4776
5 : $50.1493
4 : $51.8209
3 : $53.4925
1 : $65.1941

1,000

SDINBDA6-32G-ZA

Diodes Incorporated

32GB eMMC iNAND AT EM132 Grade2 v5.1 HS400

5 : $83.2001
4 : $92.8001
3 : $96.0
2 : $99.2001
1 : $102.4

490

A6311MI3JB-T Distributor

Link URL