| Electronic Components Datasheet Search |
|
A74TAD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Rochester Electronics | LA74309FA-BH | onsemi | Microphone Amplifier RoHS : Compliant |
| 554 | |
| LA74310LP-TLM-E | onsemi | AUDIO ICS RoHS : Compliant |
| 414,000 | ||
| LA74330V-TLM-H | onsemi | LA74330V - Specialised AV INTERFACE RoHS : Compliant |
| 3,000 | ||
OPA743NA/250![]() | Texas Instruments | OPA743 12V, 7MHz, CMOS Rail-to-Rail I/O Operational Amplifier RoHS : Compliant |
| 61,735 | ||
OPA743NA/3K![]() | Texas Instruments | Op Amp Standard 7MHz SOT-23-5 T/R RoHS : Compliant |
| 8,558 | ||
OPA743PA![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, PDIP8 ' RoHS : Compliant |
| 22,735 | ||
OPA743UA![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant |
| 10,041 | ||
| OPA743PA | Burr-Brown Corp | Operational Amplifier, 1 Func, 7000uV Offset-Max, PDIP8 ' RoHS : Compliant |
| 2,920 | ||
| OPA743UA | Burr-Brown Corp | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant |
| 421 | ||
| KA7405D | Fairchild Semiconductor Corporation | Brush DC Motor Controller, 1.5A, BIPolar, PDSO22 RoHS : Not Compliant |
| 8,293 | ||
KA741DTF![]() | Fairchild Semiconductor Corporation | Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant |
| 5,648 | ||
| MMA7457LR1 | Freescale Semiconductor | MMA7457 - 3-Axis Digital OUTPUT RoHS : Compliant |
| 13,940 | ||
| LA74309TT-TLM-E | SANYO Semiconductor Co Ltd | Microphone Amplifier For Digital Still Camera ' RoHS : Compliant |
| 1,383 | ||
| 510BBA74M2500BAG | Skyworks Solutions Inc | CRYSTAL OSC XO (Standard) LVDS 74.25MHz 2.97V ~ 3.63V ±25ppm 6-SMD Tape RoHS : Compliant |
| 200 | ||
| 510KBA74M2500BAG | Skyworks Solutions Inc | Differential/single-ended; single frequency XO; OE pin 2 (pin 1 for CMOS); 0.1-250 MHz RoHS : Compliant |
| 106 | ||
![]() NexGen Digital | 851-07A8-4S50-A7-44 | SOURIAU-SUNBANK | 21 | |||
| 851-07A10-7S50-A7-44 | SOURIAU-SUNBANK | 15 | ||||
![]() Richardson RFPD | A74 | MACOM | RF Amp Single Cascadable Amp 600MHz 15V 4-Pin TO-8 RoHS : Not Compliant |
| 0 | |
| 510BBA74M2500BAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm LVDS 52% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| EVB-CHA7452-99F | United Monolithic Semiconductors | RF MW AMP EVAL BD RoHS : Compliant | 0 | |||
| 510ABA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm LVPECL 52% 3.3V 6-Pi RoHS : Compliant |
| 0 | ||
| 510ACA74M2500AAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVPECL 52% 3.3V 6-Pi RoHS : Compliant |
| 0 | ||
| 510CCA74M2500AAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm CMOS 52% 3.3V 4-Pin RoHS : Compliant |
| 0 | ||
| 510KBA74M2500BAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm CMOS 52% 1.8V 4-Pin RoHS : Compliant |
| 0 | ||
| 550AA74M2500DG | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±100ppm (Stability) LVPEC RoHS : Compliant |
| 0 | ||
| 550AA74M2500DGR | Skyworks Solutions Inc | Oscillator VCXO 74.25MHz ±100ppm (Stability) LVPEC RoHS : Compliant |
| 0 | ||
| 510ACA74M2500BAG | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVPECL 52% 3.3V 6-Pi RoHS : Compliant |
| 0 | ||
| 510ACA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm LVPECL 52% 3.3V 6-Pi RoHS : Compliant |
| 0 | ||
| 510BAA74M2500AAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±100ppm LVDS 52% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| 510CCA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±30ppm CMOS 52% 3.3V 4-Pin RoHS : Compliant |
| 0 | ||
| 511BAA74M2500BAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±100ppm LVDS 52% 3.3V 6-Pin RoHS : Compliant |
| 0 | ||
| 511FBA74M2500AAGR | Skyworks Solutions Inc | Oscillator XO 74.25MHz ±50ppm LVDS 52% 2.5V 6-Pin RoHS : Compliant |
| 0 | ||
![]() Rutronik | Q65113A7465 | ams OSRAM Group | OSRAM SMARTLED 0603 YELLOW RoHS : Compliant |
| 8,000 | |
| Q65111A7459 | ams OSRAM Group | BLUE LASERDIODE 450NM 80MW RoHS : Compliant |
| 176 | ||
| Q65113A7463 | ams OSRAM Group | OSRAM SMARTLED 0603 TRUE GREEN RoHS : Compliant |
| 40 | ||
| A74-9857 | Alysium-Tech GmbH | USB-Cable 3.1 USB-A to USB-C L=1.0m RoHS : Compliant |
| 2 | ||
![]() Avnet Asia | DA7402-01 000OJ2 | Renesas Electronics Corporation | (Alt: DA7402-01 000OJ2) RoHS : Compliant | 0 | ||
| GPHA102-1610A743K1AA | Greenconn Corp | GCTGPHA102-1610A743K1AA 2.54MM PITCH PIN (Alt: GPHA102-1610A743K1AA) RoHS : Compliant | 0 | |||
| DA7403-01 000OJ2 | Renesas Electronics Corporation | (Alt: DA7403-01 000OJ2) RoHS : Compliant | 0 | |||
| B32653A7473J289 | TDK Corporation | General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.047 uF, ? 5%, 500 V, 1.25 kV (Alt: B32653A7473J289) RoHS : Compliant | 0 | |||
| B32653A7473J189 | TDK Corporation | General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.047 uF, ? 5%, 500 V, 1.25 kV (Alt: B32653A7473J189) RoHS : Compliant | 0 | |||
| GPHA102-0810A744K1AA | Greenconn Corp | GCTGPHA102-0810A744K1AA 2.54MM PITCH PIN (Alt: GPHA102-0810A744K1AA) RoHS : Compliant | 0 | |||
| MA74221101LF | Amphenol Corporation | (Alt: MA74221101LF) RoHS : Compliant | 0 | |||
| MA74221101LF | Amphenol Corporation | (Alt: MA74221101LF) RoHS : Compliant | 0 | |||
| A740KN477M1ELAS018 | KEMET Corporation | (Alt: A740KN477M1ELAS018) RoHS : Compliant | 0 | |||
| R7FA2E2A74CNK#HA1 | Renesas Electronics Corporation | (Alt: R7FA2E2A74CNK#HA1) RoHS : Compliant | 0 | |||
| SIRA74DP-T1-GE3 | Vishay Intertechnologies | (Alt: SIRA74DP-T1-GE3) RoHS : Compliant | 0 | |||
![]() Maritex | UA741CD![]() | STMicroelectronics | Integrated Circuit Operational Amplifier; CH:1; 1MHz; �15V; 0+70 deg.C; SMD; SO8 RoHS : Compliant |
| 20 | |
![]() Master Electronics | CA7-43-00-120 | Sprecher + Schuh | Electromechanical-Contactor Relay 85A 120VAC DIN Rail RoHS : Compliant |
| 17 | |
| A74528-000 | TE Connectivity | MTCPQKT1P2PFDA MOQ Reduction RoHS : Compliant |
| 0 | ||
| CA747/3 | Altech Corporation | Terminal Block Tools & Accessories Insul Inter Jmpr 6mm 12mm Insulated RoHS : Compliant |
| 0 | ||
| 55A7427-20-9/96-9CS2275 | TE Connectivity | 55A7427-20-9/96-9CS2275 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7426-28-6/9-9CS2275 | TE Connectivity | 55A7426-28-6/9-9CS2275 MOQ Reduction RoHS : Compliant |
| 0 | ||
| CA7419-000 | TE Connectivity | TXR54AB45-2012AI2-CS2514 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| CA745/10 | Altech Corporation | Single Level Terminal Blocks Insulated Internal Jumper CTS25UN 10 pole | Altech Corp CA745/10 RoHS : Compliant |
| 0 | ||
| CA745/3 | Altech Corporation | Single Level Terminal Blocks Insulated Internal Jumper CTS25UN 3 pole | Altech Corp CA745/3 RoHS : Compliant |
| 0 | ||
| 44A7434-22-9/5CS2968 | TE Connectivity | 44A7434-22-9/5CS2968 MOQ Reduction RoHS : Compliant |
| 0 | ||
| LTILA74-1L-WH-AM-NWH/12V | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| T11-3-1.00A-7444-1-V | Sensata Circuit Breakers | SNAPAK® series is a snap-acting hydraulicmagnetic circuit protector paddle handle. RoHS : Compliant |
| 0 | ||
| CA749/4 | Altech Corporation | Terminal Block Tools & Accessories Insul Inter Jmpr 8mm 15mm Insulated RoHS : Compliant |
| 0 | ||
| LTILA74-6S-WH-RC-NBL/125N | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| LTILA74-6S-WH-GN-NBL/18V | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| 2GA74-B8 | Carling Technologies | G-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA742-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, LSZH Jacket-1M. Pasternack’s PE3FCA742-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA742-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA742-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | |
| PE3FCA743-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, OFNR Jacket-1M. Pasternack’s PE3FCA743-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA743-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA743-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA743-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, OFNR Jacket-10M. Pasternack’s PE3FCA743-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA743-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA743-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA748-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-3M. Pasternack’s PE3FCA748-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA748-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA748-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA744-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-1M. Pasternack’s PE3FCA744-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA744-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA744-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA746-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, LSZH Jacket-10M. Pasternack’s PE3FCA746-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA746-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA746-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA749 | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket. Pasternack’s PE3FCA749 fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA749 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA749 fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. | 0 | |||
| PE3FCA741-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-10M. Pasternack’s PE3FCA741-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA741-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA741-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA744 | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket. Pasternack’s PE3FCA744 fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA744 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA744 fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. | 0 | |||
| PE3FCA749-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-1M. Pasternack’s PE3FCA749-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA749-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA749-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA748-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-5M. Pasternack’s PE3FCA748-5M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA748-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA748-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA745-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-3M. Pasternack’s PE3FCA745-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as ultra-high-density fiber network deployments, large-scale data center backbone connectivity, high-capacity MPO to LC breakout systems, core network and SAN fiber distribution and parallel optics and hyperscale infrastructure applications. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA745-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA745-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA742-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, LSZH Jacket-3M. Pasternack’s PE3FCA742-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA742-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA742-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA747-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 24 Fiber, Multimode OM4 40/100G, 50/125, OFNR Jacket-3M. Pasternack’s PE3FCA747-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA747-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 24-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA747-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA741-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Multimode OM3 10GB 50/125, OFNR Jacket-1M. Pasternack’s PE3FCA741-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a multimode OM3 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA741-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA741-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 0 | ||
![]() Sager | 44A7422-4-91 | TE Connectivity | Hook-up Wire 44A7422-4-91 PRICE PER FOOT RoHS : Not Compliant |
| 0 | |
| 44A7440-22-3/6/9-9-9 | TE Connectivity | TE Connectivity | 0 | |||
| A74528-000 | TE Connectivity | Rack & Panel Connectors MTCPQKT1P2PFDA RoHS : Compliant |
| 0 | ||
| AAA7421-00 | TE Connectivity | TE Connectivity 91A1-20-17-1-C-HE400 RoHS : Compliant | 0 | |||
| AAA7458-00 | TE Connectivity | TE Connectivity 91A1-22-07-1-B-HE100 RoHS : Not Compliant | 0 | |||
| LTILA74-6S-BL-RC-NBL-XMD1 | Carling Technologies | Rocker Switches | 0 | |||
| AAA7417-00 | TE Connectivity | TE Connectivity 91A1-20-16-1-C-HE300 RoHS : Compliant | 0 | |||
| AAA7499-00 | TE Connectivity | TE Connectivity 91A1-22-15-1-B-HE300 RoHS : Not Compliant | 0 | |||
ATS-05A-74-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-06A-74-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-13A-74-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
ATS-07A-74-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-14A-74-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| 44A7434-20 | TE Connectivity | TE Connectivity | 0 | |||
| AAA7425-00 | TE Connectivity | TE Connectivity 91A1-20-18-1-ZB-HE400 RoHS : Compliant | 0 | |||
![]() Vyrian | E-TDA7476013TR![]() | STMicroelectronics | Consumer Circuit, BCDMOS, PDSO24 | 13,272 | ||
E-TDA7476![]() | STMicroelectronics | Consumer Circuit, BCDMOS, PDSO24 | 12,868 | |||
| D5A-7413 | OMRON Corporation | Snap Acting/Limit Switch, SPST, Momentary, 3mm, Connector Terminal, Pin Plunger Actuator, Panel Mount-threaded RoHS : Compliant | 11,966 | |||
TDA7467D![]() | STMicroelectronics | Consumer Circuit, BCDMOS, PDSO28 RoHS : Compliant | 11,811 | |||
| DS28EL35QA-742-2T | Analog Devices (Maxim Integrated) | 9,235 | ||||
UA741ML![]() | Texas Instruments | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 9,184 | |||
| UA741MU | Texas Instruments | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, CDFP10 | 9,106 | |||
UA748IDT![]() | STMicroelectronics | Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 7,492 | |||
E-TDA7404DTR![]() | STMicroelectronics | Tone Control Circuit, 1 Channel(s), BICMOS, PDSO28 RoHS : Not Compliant | 7,223 | |||
UA747CDR![]() | Texas Instruments | Operational Amplifier, 2 Func, 7500uV Offset-Max, BIPolar, PDSO14 RoHS : Not Compliant | 7,018 | |||
TDA7491P![]() | STMicroelectronics | Audio Amplifier, 10W, 2 Channel(s), 1 Func, Bipolar, PDSO36 RoHS : Compliant | 7,002 | |||
TDA7480![]() | STMicroelectronics | Audio Amplifier, 10W, 1 Channel(s), 1 Func, Bipolar, PDIP20 RoHS : Compliant | 6,385 | |||
| TDA7490L | STMicroelectronics | Audio Amplifier, 20W, 2 Channel(s), 1 Func, PZFM25 RoHS : Compliant | 4,406 | |||
| TDA7492PE | STMicroelectronics | 41W, 2 Channel(s), 1 Func, PDSO36 RoHS : Compliant | 3,934 | |||
| UA748CJG4 | Texas Instruments | Operational Amplifier, 1 Func, 7500uV Offset-Max, BIPolar, CDIP8 RoHS : Compliant | 3,526 | |||
![]() Wuhan P&S | UA741CDT![]() | STMicroelectronics | RoHS : Compliant |
| 5,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |