C10-R10M- Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm. Plenum N Male to N Male Low Loss Cable Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10282 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10282 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

460

PE3C10273-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum BNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our low loss a BNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10273-12 can also be known as a low loss BNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10273-12 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to TNC plug cable assembly PE3C10273-12 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10273-12 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $81.39
10 : $79.76
25 : $78.13
100 : $76.51

190

PE3C10066-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to N Male Cable 12 Inch Length Using Tinned RG402 Coax., Radio frequency assembly N female bulkhead to N male cable 12 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N male cable 12 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3C10066-12 can also be known as a type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our bulkhead type N female to type N male cable has a maximum VSWR of 1.5:1. Type N jack to type N plug cable assembly PE3C10066-12 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10066-12 can also be used in the other direction and will be a type N male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

156

PE3C10289-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-LLPX, RF Cable Type: LMR-600-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum TNC Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-600-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum TNC male to TNC male low loss cable 24 inch length using LMR-600-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum TNC male to TNC male low loss cable 24 inch length using LMR-600-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10289-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE dielectric type. Our PE3C10289-24 RF cable has a Fluoropolymer jacket of 0.565-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance. This RF cable assembly features 4000 Vdc max DC voltage. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $124.99
10 : $122.49
25 : $119.99
100 : $117.49

PE3C100067-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to 2.92mm Female Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100067-24 low loss test 2.92mm male to 2.92mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100067-24 can also be known as a low loss test 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100067-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100067-24 2.92mm plug to 2.92mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100067-24 can also be used in the other direction and will be a 2.92mm jack to 2.92mm plug cable assembly if the opposite connectivity is required. This low loss test 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements.

1 : $723.65
5 : $694.7
10 : $665.76
25 : $636.81

PE3C10031/HS

Pasternack Enterprises

PE3C10075

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to TNC Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10075 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10075 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10075 can also be used in the other direction and will be TNC male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

PE3C10079-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to TNC Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C10079-18 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC jack cable assembly PE3C10079-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10079-18 can also be used in the other direction and will be TNC female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $235.99
25 : $224.19
50 : $212.39
100 : $202.95

PE3C10086-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086-9 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086-9 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $513.99
25 : $488.29
50 : $462.59
100 : $442.03

PE3C10090-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10090-24 can also be known as a 3.5mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N jack cable assembly PE3C10090-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10090-24 can also be used in the other direction and will be type N female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $250.99
25 : $238.44
50 : $225.89
100 : $215.85

PE3C10156

Pasternack Enterprises

PE3C10200

Pasternack Enterprises

PE3C10237

Pasternack Enterprises

PE3C10261-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 60 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-60 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $162.99
10 : $159.73
25 : $156.47
100 : $153.21

PE3C10268-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm N Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm N male low loss cable 36 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm N male low loss cable 36 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type N cable connection on the other. Our low loss BNC to N type cable assembly has male gender on end 1 and male on end 2. PE3C10268-36 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10268-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has a between series connection. BNC plug to type N plug cable assembly PE3C10268-36 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to N type cable connectors, has a 75 Ohm impedance. One connector features the crimp attachment method and a brass body with tri-metal plating, while the other has crimp/non-solder contact attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10268-36 can also be used in the other direction and will be N type male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $141.99
10 : $139.15
25 : $136.31
100 : $133.47

Venkel Ltd.

HPTF0603-QC-1022UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;10.2K;�0.01%
RoHS : Compliant

HPTF0603-SC-1001DT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;1K;�0.5%
RoHS : Compliant

HPTF0603-SC-1022AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;10.2K;�0.05%
RoHS : Compliant

HPTF0603-SC-10R5FT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;10.5R;�1%
RoHS : Compliant

HPTF0805-RC-1050UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�50PPM;105R;�0.01%
RoHS : Compliant

HPTF0805-TC-1002BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;10K;�0.1%
RoHS : Compliant

HPTF0805-TC-1071FT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;1.07K;�1%
RoHS : Compliant

HPTF1206-TC-1052UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;10.5K;�0.01%
RoHS : Compliant

HPTF1206-UC-1050FT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;105R;�1%
RoHS : Compliant

HPTF1206-UC-1071CT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�50PPM;1.07K;�0.25%
RoHS : Compliant

HPTF1210-UC-1002FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;10K;�1%
RoHS : Compliant

HPTF1210-UC-1023CT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;102K ;�0.25%
RoHS : Compliant

HPTF1210-UC-1052AT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;10.5K;�0.05%
RoHS : Compliant

HPTF2010-UC-1003FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;100K ;�1%
RoHS : Compliant

HPTF2010-UC-1053AT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;105K ;�0.05%
RoHS : Compliant

Waytek, Inc.

BK/ATC-10

Eaton Electronics

ATC 10 Amp Red Blade Fuse

100 : $0.4425
200 : $0.4066
500 : $0.3663
1,000 : $0.2886
5,000 : $0.2825

35,074

AL-SM3-0-C (#10 BOLT

Advanced Cable Ties Inc

ACT AL-SM3-0-C UV-resistant screw mount is a black nylon cable-tie mount sized for #10 screws and built for outdoor or exposed environments. Its UV-resistant construction and screw-mount format support secure bundle attachment, organized routing, and durable harness support.

100 : $0.2997
200 : $0.2768
500 : $0.2516
1,000 : $0.2328
5,000 : $0.2217

7,900

FHJC1002G

Littelfuse Inc

In-Line 60A JCase Fuse Holder 8 GA Red GXL 125C With Cover -40C TO 125C 46099
RoHS : Compliant

1 : $11.96
10 : $10.4
50 : $10.4
100 : $9.2
200 : $8.85
500 : $8.55

1,215

ACBP-N-10C 10A

OptiFuse

Type 1 Circuit Breaker No Mounting Bracket 10A, 32VDC GRAY

1 : $3.7693
50 : $3.1391
100 : $2.7391
200 : $2.5816
500 : $2.4725

290

LPXC10

Lovato Electric Inc

Lovato Electric LPXC10 contact element is a Platinum Series 22 mm normally open contact block for Lovato pushbuttons and selector switches. It uses screw terminals, front mounting, and a 1-pole design rated 6A at 240VAC for compact control-circuit assemblies.

1 : $8.47
5 : $8.16
10 : $7.89
50 : $7.47
100 : $7.2
200 : $6.98

251

LM-2C-10R/WLAT216

NASON

Low Pressure Switch UL CSA 10 PSI SPDT Rising 18" UL 3173 10A@125/250 250 VAC 5A@30VDC

1 : $60.1
5 : $56.67
10 : $54.95
50 : $52.38
100 : $49.8

172

12010C10

Eaton Electronics

10A 12V To 24V Converter 80110 Mates With DT06-6S 38176

1 : $265.03
5 : $252.27
10 : $241.1

ACBP-H-10C 10A

OptiFuse

Type 1 Circuit Breaker Right Angle Mounting 10A, 32 VDC

1 : $2.8764
50 : $2.4064
100 : $2.0868
200 : $1.9646
500 : $1.8706

21010C10

Eaton Electronics

Sure Power Converter 24V to12V 10 Amps, Switched Outputs

1 : $163.5
5 : $155.53
10 : $148.56

LM-2C-100R/WLAT

NASON

Low Pressure Switch UL CSA 100 PSI SPDT Rising 18" UL3173 10A@125/250 250 VAC 5A@30VDC

1 : $74.64
5 : $70.38
10 : $68.23
50 : $65.04
100 : $61.84

41020C10

Eaton Electronics

Sure Power 41020C10 Converter 70-28 / 113.5V 20A IP67

1 : $259.45
5 : $246.95
10 : $235.99

12040C10

Eaton Electronics

Sure Power 12040C10 Converter 40A 12V TO 24V REPLACED 80118

1 : $1,116.13
5 : $1,062.39
10 : $1,015.27

21020C10

Eaton Electronics

Sure Power Converter 24V to12V 20 Amps, Switched Outputs

1 : $295.92
5 : $281.5
10 : $268.87

21030C10

Eaton Electronics

Sure Power 21030C10 Converter 30A 24V TO 12V REPLACED 80107 21030C00

1 : $485.35
5 : $461.98
10 : $441.52

ACBP-V-10C 10A

OptiFuse

Type 1 Circuit Breaker In-Line Mounting 10A, 32VDC GRAY

1 : $3.3596
50 : $2.8032
100 : $2.4325
200 : $2.2906
500 : $2.2033

Win Source Electronics

C1005X5R1C105KT000E

TDK Corporation

RoHS : Compliant

1,905 : $0.1576
1,425 : $0.1758
1,100 : $0.1819
800 : $0.1879
520 : $0.194
215 : $0.2364

290,000

TAJC107K010RNJ C 10V107K

Kyocera AVX Components

CAP TANT 100UF 10V 10% 2312

1,190 : $0.2522
890 : $0.2813
690 : $0.291
500 : $0.3007
325 : $0.3104
135 : $0.3782

200,000

C1608X7R1C105KT000N

TDK Corporation

27,780 : $0.0108
20,665 : $0.0121
16,000 : $0.0125
11,630 : $0.0129
7,520 : $0.0133
3,090 : $0.0162

100,000

C1005X7R1C104KT000F

TDK Corporation

Cap Ceramic 0.1uF 16V X7R 10%

23,625 : $0.0127
17,735 : $0.0141
13,700 : $0.0146
9,935 : $0.0151
6,415 : $0.0156
2,635 : $0.019

71,000

CPC1001N

IXYS Integrated Circuits Division

OPTOISOLATOR 1.5KV TRANS 4SMD
RoHS : Compliant

210 : $1.4324
157 : $1.5977
122 : $1.6528
88 : $1.7079
57 : $1.763
24 : $2.1486

20,447

DAC101C081CIMK

National Semiconductor Corporation

10-Bit Micro Power Digital-to-Analog Converter with an I2C-Compatible Interface
RoHS : Compliant

260 : $1.3051
210 : $1.3582
160 : $1.4113
115 : $1.5174
75 : $1.5705
35 : $1.6765

16,150

IPC100N04S5-1R2

Infineon Technologies AG

MOSFET 40V, N-Ch, 1.2 mΩ max, AutoG , SS08 (5x6), OptiMOS-5
RoHS : Compliant

250 : $1.2205
185 : $1.3613
145 : $1.4083
105 : $1.4552
70 : $1.5021
30 : $1.8307

15,000

CY7C1049GN30-10ZSXIT

Cypress Semiconductor

IC SRAM 4M PARALLEL 44TSOP II
RoHS : Compliant

71 : $4.7647
57 : $4.9584
44 : $5.152
31 : $5.5394
20 : $5.7331
10 : $6.1205

13,920

C0402C103K4RACAUTO

KEMET Corporation

CAP CER 10000PF 16V X7R 0402 / 10000 pF ±10% 16V Ceramic Capacitor X7R 0402 (1005 Metric)
RoHS : Compliant

47,620 : $0.0063
35,715 : $0.007
27,400 : $0.0073
20,000 : $0.0075
12,825 : $0.0078
5,320 : $0.0094

13,115

C1005X5R1A105K050BB

TDK Corporation

CAP CER 1UF 10V X5R 0402
RoHS : Compliant

6,820 : $0.0493
5,095 : $0.055
3,945 : $0.0568
2,865 : $0.0587
1,850 : $0.0606
760 : $0.0738

13,000

HMC1010LP4E

Analog Devices Inc

RMS POWER DETECTOR DC - 3.9 GHz | IC RF DETECT 0HZ-3.9GHZ 24QFN
RoHS : Compliant

65 : $4.6591
52 : $4.8485
40 : $5.0379
28 : $5.4167
18 : $5.6061
9 : $5.9849

10,324

BZX84C10TS-7-F

Diodes Incorporated

DIODE ZENER ARRAY 10V SOT363
RoHS : Compliant

390 : $0.8693
290 : $0.9696
225 : $1.0031
165 : $1.0364
105 : $1.0699
45 : $1.3039

7,600

IVC102U/2K5

Texas Instruments

IC OPAMP TRANSIMP 2MHZ 14SOIC
RoHS : Compliant

9 : $33.5455
8 : $34.9091
6 : $36.2728
4 : $39.0
3 : $40.3637
2 : $43.091

4,610

ADC102S101CIMM

Texas Instruments

ADC102S101 2 Channel, 500 ksps to 1 Msps, 10-Bit A/D Converter | IC ADC 10BIT SAR 8VSSOP
RoHS : Not Compliant

55 : $5.4894
41 : $6.1228
32 : $6.3339
23 : $6.545
15 : $6.7561
7 : $8.234

2,000

CY7C1021D-10ZSXI

Cypress Semiconductor

IC SRAM 1MBIT 10NS 44TSOP
RoHS : Compliant

139 : $2.1667
104 : $2.4167
80 : $2.5
59 : $2.5834
38 : $2.6667
16 : $3.2501

2,000

Wuhan P&S

MMA02040C1000FB300

Vishay Intertechnologies

Professional Thin Film MELF Resistors
RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

101,580

MMB02070C1009FB200

Vishay Intertechnologies

Professional Thin Film MELF Resistors,10�� 1% 1W
RoHS : Compliant

1 : $0.53
100 : $0.18
500 : $0.17
1,000 : $0.16

56,000

VS-C10ET07T-M3

Vishay Intertechnologies

650 V Power SiC Merged PIN Schottky Diode, 10 A
RoHS : Compliant

1 : $4.27
100 : $1.54
500 : $1.11
1,000 : $1.03

23,000

MRS25000C1002FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

MRS25000C1001FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

MRS25000C1004FCT00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.29
100 : $0.1
500 : $0.09
1,000 : $0.09

15,000

TX3B336K020C1000

Vishay Intertechnologies

Tantalum capacitor, 33 ? F
RoHS : Unknown

1 : $0.97
100 : $0.33
500 : $0.3
1,000 : $0.29

4,000

MC10EL01DG

onsemi

5V ECL 4-Input OR/NOR
RoHS : Compliant

1 : $10.96
100 : $7.0
500 : $5.77
1,000 : $5.31

1,274

MC100LVEP05MNTXG

onsemi

RoHS : Compliant

1 : $16.48
100 : $10.52
500 : $8.68
1,000 : $7.98

1,000

MC100EP140DG

onsemi

3.3VECL Phase Frequency Detector
RoHS : Compliant

1 : $22.23
100 : $14.19
500 : $11.7
1,000 : $10.76

686

MC100EL32DG

onsemi

5V ECL ��2 Divider
RoHS : Compliant

1 : $8.93
100 : $5.7
500 : $4.7
1,000 : $4.32

490

MC100EL15DG

onsemi

5V ECL 1:4 Clock Distribution Chip
RoHS : Compliant

1 : $6.98
100 : $4.45
500 : $3.67
1,000 : $3.38

240

MC100EL01DG

onsemi

5V ECL 4-Input OR/NOR
RoHS : Compliant

1 : $8.93
100 : $5.7
500 : $4.7
1,000 : $4.32

MC100EPT23DG

onsemi

3.3V Dual Differential LVPECL/LVDS to LVTTL Translator
RoHS : Compliant

1 : $18.05
100 : $11.52
500 : $9.5
1,000 : $8.74

STPSC10H065DLF

STMicroelectronics

Silicon Carbide Schottky Diode 650 V 10A
RoHS : Compliant

1 : $11.97
100 : $3.99
500 : $3.7
1,000 : $3.6

C10-R10M- Distributor

Link URL