| Electronic Components Datasheet Search |
|
C10-R12M- Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Analog Devices Inc | LTC1096AIS8#PBF | Analog Devices Inc | uP Smpl 8-B Serial I/O A/D Co RoHS : Compliant |
| 2,719 | |
| LTC1044AIN8#PBF | Analog Devices Inc | 12V CMOS V Conv RoHS : Compliant |
| 1,400 | ||
| LTC1049CN8#PBF | Analog Devices Inc | L Pwr Zero-Drift Op Amp w/ Int RoHS : Compliant |
| 850 | ||
| LTC1090CSW#PBF | Analog Devices Inc | 1x Chip 10-B Data Acquisition RoHS : Compliant |
| 844 | ||
| EVAL01-HMC1056LP4B | Analog Devices Inc | HMC1056LP4B EVALUATION PCB ASS RoHS : Compliant |
| 246 | ||
| DC1040A-B | Analog Devices Inc | LTC3544BEUD Demo Board |
| 216 | ||
| DC1061A | Analog Devices Inc | LTC3552EDHC Demo Board |
| 96 | ||
| DC1028A | Analog Devices Inc | LT3513EUHF DEMO BOARD - 2MHz H |
| 55 | ||
| DC1053A-H | Analog Devices Inc | LTC3526LBEDC-2 Demo Board: 2MH |
| 25 | ||
| EVAL01-HMC1065LP4 | Analog Devices Inc | EVAL PCB ASSY RoHS : Compliant |
| 23 | ||
| DC1009A-A | Analog Devices Inc | LTC2492 24-bit, 2-ch ADC, req. |
| 12 | ||
| EVAL01-HMC1061LC5 | Analog Devices Inc | HMC1061LC5 EVALUATION PCB ASSE RoHS : Not Compliant |
| 0 | ||
| DC1043A-B | Analog Devices Inc | LTM4601 Demo Board - 30A Paral |
| 0 | ||
| LTC1068-50CG#TRPBF | Analog Devices Inc | Clock-Tunable, 4x Second Order RoHS : Compliant |
| 0 | ||
DAC10FX![]() | Analog Devices Inc | 10-BIT HIGH-SPEED MULTIPL RoHS : Not Compliant |
| 0 | ||
![]() NXP Semiconductors | PN7642EV/C101Y | NXP Semiconductors | Single-Chip Solution with High-Performance NFC Reader, Customizable MCU and Security Toolbox, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 508 | |
| PN7221EV/C101K | NXP Semiconductors | High-Performance, One-Chip NFC Controller for EMVCo 3.1 and NFC Forum Operation, with support for Apple ECP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 204 | ||
| PN7160B1HN/C100E | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 1,355 | ||
| PN76ACEV/C100Y | NXP Semiconductors | Plug-and-Play NFC Controller Connecting to NXP's MCU and MPU Portfolio, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 975 | ||
| PN7220EV/C101Y | NXP Semiconductors | High-Performance, One-Chip NFC Controller for EMVCo 3.1 and NFC Forum Operation, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 1,829 | ||
| PN7160B1EV/C100K | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,657 | ||
| PN7160A1HN/C100E | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 1,206 | ||
| PN7161B1HN/C100E | NXP Semiconductors | EMV L1 Compliant NFC Controller with NCI Interface Supporting EMV and NFC Forum Applications with support for Apple ECP, Tray, Bakeable, Single in Drypack RoHS : Compliant |
| 385 | ||
| PN7642EV/C102Y | NXP Semiconductors | Single-Chip Solution with High-Performance NFC Reader, Customizable MCU and Security Toolbox, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 1,812 | ||
| PN7160A1EV/C100K | NXP Semiconductors | NFC Plug and Play Controller with Integrated Firmware and NCI Interface, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,626 | ||
| MK22FN128VDC10 | NXP Semiconductors | Kinetis® K22-100 MHz, Cost Effective, Full-Speed USB Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 3,475 | ||
| PN7221EV/C101Y | NXP Semiconductors | High-Performance, One-Chip NFC Controller for EMVCo 3.1 and NFC Forum Operation, with support for Apple ECP, Reel 13" Q1/T1 in Drypack RoHS : Compliant |
| 4,022 | ||
![]() Microchip Technology Inc | TC1054-3.0VCT713![]() | Microchip Technology Inc | 50mA LDO with Shutdown & /Error output, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 33,000 | |
| DSPIC33CK64MC102-E/2N | Microchip Technology Inc | dsPIC33C 100MHz, 64K Flash, 8K RAM, OpAmps, 12bit ADCs, PWM, UQFN, Projected EOL: 2046-08-05 RoHS : Compliant |
| 9,455 | ||
| DSPIC33AK128MC102-E/SS | Microchip Technology Inc | dsPIC33A, FPU, 200MHz, 128K Flash, 16K RAM, MC-PWM, 12-bit ADCs, Op Amps, Comp., SSOP, Projected EOL: 2051-09-04 RoHS : Compliant |
| 8,251 | ||
| DSPIC33CK32MC102-I/M6 | Microchip Technology Inc | dsPIC33C 100MHz, 32K Flash, 8K RAM, OpAmps, 12bit ADCs, PWM, UQFN, Projected EOL: 2046-08-05 RoHS : Compliant |
| 7,280 | ||
PIC10LF322T-I/MC![]() | Microchip Technology Inc | 448 B Flash, 32 B RAM, 4 I/O, 8bit ADC, PWM, CLC, DDS, CWG,, DFN, Projected EOL: 2041-09-13 RoHS : Compliant |
| 6,500 | ||
TC1015-4.0VCT713![]() | Microchip Technology Inc | 100mA LDO with Shutdown & V REF Bypass, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,000 | ||
| DSPIC33CK32MC105-I/M4 | Microchip Technology Inc | dsPIC33C 100MHz, 32K Flash, 8K RAM, OpAmps, 12bit ADCs, PWM, UQFN, Projected EOL: 2046-08-05 RoHS : Compliant |
| 4,563 | ||
ATWILC1000B-MU-Y![]() | Microchip Technology Inc | SmartConnect Chipset WINC1000, VQFN, Projected EOL: 2046-01-23 RoHS : Compliant |
| 4,410 | ||
TC1046VNBTR![]() | Microchip Technology Inc | High Precision Temp-to-Voltage Converter (6.25mV/oC), SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 2,930 | ||
| DSPIC33CDV64MC106-E/M8 | Microchip Technology Inc | 16-bit DSC, 64K Flash, 8K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-02-23 RoHS : Compliant |
| 2,120 | ||
TC1014-2.5VCT713![]() | Microchip Technology Inc | 50mA LDO with Shutdown & V REF Bypass, SOT-23, Projected EOL: 2036-01-01 RoHS : Compliant |
| 2,000 | ||
| DSPIC33CK64MC102-E/2NVAO | Microchip Technology Inc | dsPIC33C 100MHz, 64K Flash, 8K RAM, OpAmps, 12bit ADCs, PWM, UQFN, Projected EOL: 2051-09-01 RoHS : Compliant |
| 1,220 | ||
| DSPIC33AK64MC106-I/M7 | Microchip Technology Inc | dsPIC33A, FPU, 200MHz, 64K Flash, 16K RAM, MC-PWM, 12-bit ADCs, Op Amps, Comp, VQFN, Projected EOL: 2051-09-03 RoHS : Compliant |
| 826 | ||
| BM64SPKS1MC1-00M2AA | Microchip Technology Inc | Class-1 43LD BLUETOOTH AUDIO MODULE WITH SHIELDING. 32x15mm, MODULE, Projected EOL: 2046-03-22 RoHS : Compliant |
| 55 | ||
| DSPIC33AK32MC105-E/M7 | Microchip Technology Inc | dsPIC33A, FPU, 200MHz, 32K Flash, 8K RAM, MC-PWM, 12-bit ADCs, Op Amps, Comp., VQFN, Projected EOL: 2051-09-03 RoHS : Compliant |
| 48 | ||
![]() Rochester Electronics | CY7C1020D-10VXIT | Cypress Semiconductor | SRAM 512kbit 32k x 16 4.5V - 5.5V Parallel 10ns 44-SOJ T/R RoHS : Compliant |
| 24,237 | |
| CY7C1021BNL-15VXCT | Cypress Semiconductor | Standard SRAM, 64KX16, 15ns PDSO44 RoHS : Compliant |
| 500 | ||
| CY7C1021BNL-15ZSXAKJ | Cypress Semiconductor | ASYNC RAM |
| 239 | ||
| CY7C1021BNL-15ZXIT | Cypress Semiconductor | Standard SRAM, 64KX16, 15ns, CMOS, PDSO44 RoHS : Compliant |
| 2,047 | ||
CY7C1024AV33-10BGC![]() | Cypress Semiconductor | Standard SRAM, 128KX24, 10ns, CMOS, PBGA119 RoHS : Not Compliant |
| 94 | ||
CY7C1041BV33-15VC![]() | Cypress Semiconductor | Standard SRAM, 256KX16, 15ns PDSO44 RoHS : Not Compliant |
| 5,073 | ||
CY7C1041BV33-20VCT![]() | Cypress Semiconductor | Standard SRAM, 256KX16, 20ns PDSO44 RoHS : Not Compliant |
| 500 | ||
CY7C1041BV33L-15ZC![]() | Cypress Semiconductor | Standard SRAM, 256KX16, 15ns, CMOS, PDSO44 |
| 876 | ||
CY7C1041CV33-12ZCT![]() | Cypress Semiconductor | Standard SRAM, 256KX16, 12ns, CMOS, PDSO44 |
| 6,033 | ||
CY7C1371C-100BZC![]() | Cypress Semiconductor | ZBT SRAM, 512KX36, 8.5ns, CMOS, PBGA165 RoHS : Not Compliant |
| 2 | ||
| CD74HC10M128 | Harris Semiconductor | HIGH-SPEED CMOS LOGIC TRIPLE 3-INPUT NAND GATE RoHS : Not Compliant |
| 1,265 | ||
OR2C10A3S208I-DB![]() | Lattice Semiconductor Corporation | Field Programmable Gate Array, 256 CLBs, 12300 Gates, 476MHz, 1024-Cell, CMOS, PQFP208 RoHS : Not Compliant |
| 259 | ||
DSC1001CC1-010.0000T![]() | Microchip Technology Inc | CRYSTAL OSC XO (Standard) CMOS 10MHz 1.7V ~ 3.6V ±50ppm 4-SMD T/R RoHS : Compliant |
| 5,202 | ||
DSC1001CC1-076.0686T![]() | Microchip Technology Inc | CMOS Output Clock Oscillator, 76.0686MHz Nom RoHS : Compliant |
| 9,000 | ||
DSC1001CI1-132.0000T![]() | Microchip Technology Inc | CMOS Output Clock Oscillator, 132MHz Nom RoHS : Compliant |
| 1,000 | ||
![]() Coilcraft Direct | 016008C-10NXJR | Coilcraft Inc | RF Inductor, ceramic core, 5/10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 12,715 | |
| DS1608C-102MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 6,275 | ||
| 0603HC-10NXGR | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 798 | ||
| RFC1010B-474KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 659 | ||
| RFC1010B-564KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 624 | ||
| RFC1010B-104KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 225 | ||
| RFC1010B-186KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 148 | ||
| RFC1010B-684KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 100 | ||
| DC1012-183L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant | 74 | |||
| DC1012-124L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant | 66 | |||
| 1205POC-103MRC | Coilcraft Inc | Common Mode Choke, PoC, ferrite core, 20% tol, SMT, RoHS RoHS : Compliant |
| 56 | ||
| C1048-ALD | Coilcraft Inc | PoE transformer, for LT1725, SMT, RoHS RoHS : Compliant |
| 56 | ||
| DC1012-224L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant | 21 | |||
| 026011C-10NXJRY | Coilcraft Inc | RF Inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| C1099-ALD | Coilcraft Inc | PoE transformer, for MAX5941A, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | C1005X7R1C104K050BC![]() | TDK Corporation | Capacitor: ceramic; MLCC; 100nF; 16V; X7R; ±10%; SMD; 0402; 178mm RoHS : Compliant |
| 2,089 | |
| MBB02070C1003FC100 | Vishay Intertechnologies | Resistor: metal film; 100kΩ; THT; 600mW; ±1%; -55÷155°C; 50ppm/°C RoHS : Compliant |
| 1,000 | ||
| C10 | Redisage ELECTRONICS | Automation module: converter; RS232/RS485; Usup: 12÷30VDC; IP20 |
| 0 | ||
C10![]() | XP Power | Converter: DC/DC; 1W; Uin: 11.5÷16VDC; Uout: 0÷1kVDC; Iout: 1mA; THT RoHS : Compliant |
| 0 | ||
| MBA02040C1008FC100 | Vishay Intertechnologies | Resistor: metal film; 1Ω; THT; 400mW; ±1%; 0; 200V; Ø0.5x29mm; axial RoHS : Compliant |
| 0 | ||
| MBA0204VC1020FC100 | Vishay Intertechnologies | Resistor: metal film; 102Ω; THT; 400mW; ±1%; V; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| MBE04140C1002FC100 | Vishay Intertechnologies | Resistor: metal film; 10kΩ; THT; 1W; ±1%; 500V; Ø4.2x11.9mm; axial RoHS : Compliant |
| 0 | ||
| MRS16000C1071FC100 | Vishay Intertechnologies | Resistor: thin film; 1.07kΩ; THT; 400mW; ±1%; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| MRS25000C1054FC100 | Vishay Intertechnologies | Resistor: thin film; 1.05MΩ; THT; 600mW; ±1%; 350V; Ø0.6x28mm RoHS : Compliant |
| 0 | ||
| MBA02040C1079FC100 | Vishay Intertechnologies | Resistor: metal film; 10.7Ω; THT; 400mW; ±1%; 0; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| MBA0204VC1054FC100 | Vishay Intertechnologies | Resistor: metal film; 1.05MΩ; THT; 400mW; ±1%; V; 200V; Ø0.5x29mm RoHS : Compliant |
| 0 | ||
| MBE04140C1001FC100 | Vishay Intertechnologies | Resistor: metal film; 1kΩ; THT; 1W; ±1%; 500V; Ø4.2x11.9mm; 50ppm/°C RoHS : Compliant |
| 0 | ||
| MRS16000C1029FC100 | Vishay Intertechnologies | Resistor: thin film; 10.2Ω; THT; 400mW; ±1%; 200V; Ø0.5x29mm |
| 0 | ||
| MRS16000C1070FC100 | Vishay Intertechnologies | Resistor: thin film; 107Ω; THT; 400mW; ±1%; 200V; Ø0.5x29mm; L: 3.6mm |
| 0 | ||
| MRS25000C1053FC100 | Vishay Intertechnologies | Resistor: thin film; 105kΩ; THT; 600mW; ±1%; 350V; Ø0.6x28mm RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | C0603C104K5RACTU![]() | KEMET Corporation | Capacitor: ceramic; MLCC; 100nF; 50VDC; X7R; ±10%; SMD; 0603 RoHS : Compliant | 732,000 | ||
C0402C104K4RACAUTO![]() | KEMET Corporation | Capacitor: ceramic; MLCC; 100nF; 16VDC; X7R; ±10%; SMD; 0402 RoHS : Compliant | 150,000 | |||
| C06035C102KAT2A | KEMET Corporation | 49,353 | ||||
C0805C104K1RACAUTO![]() | KEMET Corporation | Capacitor: ceramic; MLCC; 100nF; 100VDC; X7R; ±10%; SMD; 0805 RoHS : Compliant | 25,000 | |||
| CL10C100CB8NNNC | Samsung Electronics Co. Ltd | CL10 Series 10 pF 50 V ±0.25 pF Tolerance C0G SMT Multilayer Ceramic Capacitor | 11,307 | |||
| EEEFN1C100R | Panasonic Electronic Components | RoHS : Compliant | 10,000 | |||
| EEEFT1C101AR | Panasonic Electronic Components | Capacitor: electrolytic; low impedance; SMD; 100uF; 16VDC; ±20% RoHS : Compliant | 5,000 | |||
| 400CFX6R8MEFC10X16 | Rubycon Corporation | RoHS : Compliant | 4,000 | |||
| EEEFC1C100AR | Panasonic Electronic Components | Capacitor: electrolytic; low impedance; SMD; 10uF; 16VDC; Ø4x5.4mm RoHS : Compliant | 4,000 | |||
ADC104S021CIMMX/NOPB![]() | Texas Instruments | ADC 10BIT 4CH 200KSPS 10-MSOP RoHS : Compliant | 3,500 | |||
| ECHU1C103JX5 | Panasonic Electronic Components | FILM SMD 10nF 5% 16V PPS 2x1.25x1.1 T&R RoHS : Compliant | 3,000 | |||
BZV55-C10,135![]() | NXP Semiconductors | RoHS : Compliant | 2,218 | |||
| EEEHP1C100R | Panasonic Electronic Components | RoHS : Compliant | 2,000 | |||
| MBB02070C1003FC100 | NXP Semiconductors | 350 | ||||
| 400BXC10MEFC10X16 | Rubycon Corporation | CAP ALUM RAD | 20 | |||
![]() ComSIT USA | MRS25000C1009FC100 | BC COMPONENTS/VISHAY INTERTECHNOLOGY INC | AVAILABLE EU | 4,612 | ||
C0603C104K5RACTU![]() | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 455 | |||
C0805C102J5GACTU![]() | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 326 | |||
C1005X5R1H102K050BA![]() | TDK Corporation | AVAILABLE EU RoHS : Compliant | 4,094 | |||
| CL05C100JB51PNC | SAMSUNG ELECTRONICS CO LTD | AVAILABLE EU | 131 | |||
C1005X7R1H104K050BB![]() | TDK Corporation | AVAILABLE EU RoHS : Compliant | 2,730 | |||
C1005X7S2A682K050BB![]() | TDK Corporation | AVAILABLE EU RoHS : Compliant | 1,097 | |||
GCM155R71C104KA55D![]() | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 660 | |||
| 04025C102JAT2A | AVX/KYOCERA AVX COMPONENTS CORPORATION | AVAILABLE EU | 6,123 | |||
| 2225AC104KAT1A | AVX/KYOCERA AVX COMPONENTS CORPORATION | AVAILABLE EU | 1 | |||
| 12065C104JAT2A | AVX/KYOCERA AVX COMPONENTS CORPORATION | AVAILABLE EU | 1,416 | |||
| LQW15AN2N2C10D | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 593 | |||
| 18121C105MAT2A | AVX/KYOCERA AVX COMPONENTS CORPORATION | AVAILABLE EU | 39 | |||
C0402C102K5GACTU![]() | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 1,469 | |||
C0805C105K8RACTU![]() | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 1,624 | |||
![]() GLYN GmbH & Co. KG | CGA3E1X7R1C105K080AC![]() | TDK Corporation | Multilayer Ceramic Chip Capacitor SMD 0603 16VDC RoHS : Compliant | 4,000 | ||
| AOFC100-500 | Asahi Chemical Co Ltd | Fibre Optic Cable APF 500m on Reel | 500 | |||
| AOFC100ABSCHNITT | Asahi Chemical Co Ltd | Fibre Optic Cable APF | 487 | |||
| FC5NC1016G-E | Shenzhen Longsys Electronics Co Ltd | microSD Card, 16GB, 3D TLC, -25øC to 85øC | 445 | |||
| EVBC3216X7R1C106K160AC | Glyn | CAP CER 10UF 16V 10% X7R 1206 | 3 | |||
| ADA-FFC10-050-MLX08-125 | ES+S | LED Backlight Adapter TIANMA P1330FHF1MA00 | 2 | |||
| SGMM2130XESAC10G/TR EVK | SG Micro Corp | Evaluation Board for SGMM2130XESAC10G, 3V to 17V | 1 | |||
![]() Interstate Connecting Components | H3CR-A8 AC100-240/DC100-125 | OMRON Industrial Automation | H3CR-A8 AC100-240/DC100-125 4 MULT FUNCT TIMER,8PIN |
| 6 | |
| H3CR-F8N AC100-240/DC100-125 | OMRON Industrial Automation | H3CR-F8N AC100-240/DC100-125 TIMER,REPEAT CYCLE |
| 1 | ||
| 620-053UC10C-102 | Glenair Inc | STRAIN RELIEF/CLAMPS | 0 | |||
| JT02C-10-5SC(101) L/C | Amphenol Aerospace | RECEPT 87-488842-05X | 0 | |||
| BACC10PC10CB | Glenair Inc | BACC10PC10CB REV B | 0 | |||
| DCD-06AFFM-QL8C10 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 20 OVERMOLDED | 0 | |||
| DCD-08RFMC-RC8C10 | Amphenol LTW Technology | RBL, LARGE SIZE, PLASTIC, 20A5 RECEPTACLE WITH WIRES | 0 | |||
| CN0967C10A02P7-000 | Cinch Connectivity Solutions | 26500 WALL MT 2#20 PIN | 0 | |||
| CN0967C10G02P10-000 | Cinch Connectivity Solutions | 26500 WALL MT 2#20 PIN | 0 | |||
| CN0967C10S02SNY040 | Cinch Connectivity Solutions | 26500 WALL MT 2#20 SKT | 0 | |||
| BACC63BP16C10P10H | Cinch Connectivity Solutions | BACC PLUG 10#16 PIN | 0 | |||
| BACC63BP16C10SN | Cinch Connectivity Solutions | STRAIGHT SELF-LOCKING PLUG THREADED COUPLING | 0 | |||
| BACC63CC10-2AS8H | Cinch Connectivity Solutions | BACC WALL MT 2#20 SKT | 0 | |||
| C10-613362-016 | Amphenol Industrial Operations | ATC SERIES | 0 | |||
| C10-730187-1001 | Amphenol Industrial Operations | 0 | ||||
![]() NexGen Digital | GCM155R71C104KA55D![]() | Murata Manufacturing Co Ltd | RoHS : Compliant | 2,195,817 | ||
C0603C104K4RAC![]() | KEMET Corporation | RoHS : Compliant | 1,696,277 | |||
| C1005X7R1H102KT0Y0F | TDK Corporation | 400,000 | ||||
C1005X6S1C105K050BC![]() | TDK Corporation | RoHS : Compliant | 10,000 | |||
C1210C106K3PAC7800![]() | KEMET Corporation | RoHS : Compliant | 4,911 | |||
| SR201C104KARTR1 | Kyocera AVX Components | RoHS : Compliant | 4,874 | |||
GMC10CG102J50NT![]() | Cal-Chip Electronics | RoHS : Compliant | 3,970 | |||
| C323C104M5U5CA | KEMET Corporation | RoHS : Compliant | 3,300 | |||
12065C104JAT2A![]() | Kyocera AVX Components | RoHS : Compliant | 3,014 | |||
C0805C104K1RAC7800![]() | KEMET Corporation | RoHS : Compliant | 2,500 | |||
| MRS25000C1004FC100 | Vishay Huntington | 1,935 | ||||
| SA105C103MAR | Kyocera AVX Components | RoHS : Compliant | 500 | |||
| BC103J1K | Littelfuse Inc | RoHS : Compliant | 400 | |||
| RN60C1001FB14 | Vishay Huntington | 100 | ||||
C0603C104K5RACTU![]() | KEMET Corporation | RoHS : Compliant | 96 | |||
![]() PEI Genesis | BACC10JC12 | SOURIAU-SUNBANK |
| 21 | ||
| BACC10KC10 | SOURIAU-SUNBANK |
| 0 | |||
| BACC10JC10 REV F | SOURIAU-SUNBANK |
| 0 | |||
| BACC10JC10 | SOURIAU-SUNBANK |
| 0 | |||
| DPJM-59C10-34S-B | ITT Interconnect Solutions |
| 0 | |||
| CN0967C10A02P7-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C10G02P10-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C10G20S6-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C10S02SNY040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C10S20S6-200 | Cinch Connectivity Solutions |
| 0 | |||
| BACC10HF18A | SOURIAU-SUNBANK |
| 0 | |||
| BACC10HW32 | SOURIAU-SUNBANK |
| 0 | |||
| BACC10JS22A | SOURIAU-SUNBANK |
| 0 | |||
| BACC10KA22 | SOURIAU-SUNBANK |
| 0 | |||
| BACC10KD10 | SOURIAU-SUNBANK |
| 0 | |||
![]() Braemac Americas-Symmetry | ASDMPAC-100.0000MHZ-LJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ASDMPAC-100.0000MHZ-V-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-100.0000MHZ-LJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-4R7G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R10G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R47G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| EZ32-C100-EU | Digi International Inc | Connect EZ 32 MEI Serial Server, 32 RS-232/422/485 Serial Ports, EU Power Cord |
| 0 | ||
| ASDMPAHC-100.0000MHZ-X-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAC-100.0000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-100.0000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-4R7M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R10M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R47M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R68J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AISC-1008F-2R7G-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() ECCO | C10-690206-001 | Amphenol Industrial Operations |
| 300 | ||
| C10-766624-050 | Amphenol Industrial Operations |
| 100 | |||
| C10-766101-016 | Amphenol Industrial Operations |
| 100 | |||
| C10-731006-080 | Amphenol Industrial Operations |
| 100 | |||
| C10-766102-100 | Amphenol Industrial Operations |
| 100 | |||
| C10-766101-025 | Amphenol Industrial Operations |
| 100 | |||
| C10-765498-070 | Amphenol Industrial Operations |
| 100 | |||
| C10-730653-030 | Amphenol Industrial Operations |
| 100 | |||
| C10-765499-100 | Amphenol Industrial Operations |
| 100 | |||
| C10-737887-053 | Amphenol Industrial Operations |
| 19 | |||
| C10-670060-005 | Amphenol Industrial Operations |
| 17 | |||
| C10-737238-003 | Amphenol Industrial Operations |
| 15 | |||
| C10-690669-000 | Amphenol Industrial Operations |
| 8 | |||
| C10-690669-000 | Amphenol Industrial Operations |
| 8 | |||
| C10-737307-000 | Amphenol Industrial Operations |
| 5 | |||
![]() Flip Electronics | MC100LVELT20DG![]() | onsemi | Stock RoHS : Compliant | 147,324 | ||
MC100LVEP210MNG![]() | onsemi | Stock RoHS : Compliant | 30,000 | |||
CY7C1061AV33-10ZXC![]() | Cypress Semiconductor | Stock RoHS : Compliant | 20,000 | |||
CY7C1019CV33-10ZXCT![]() | Cypress Semiconductor | Stock | 19,000 | |||
MC100LVEP16D![]() | onsemi | Stock RoHS : Not Compliant | 15,000 | |||
LC4128C-10T100I![]() | Lattice Semiconductor Corporation | Stock RoHS : Not Compliant | 10,000 | |||
MC10H131FNG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,349 | ||
| CY7C1019DV33-10VXIT | Infineon Technologies AG | Stock RoHS : Compliant | 8,287 | |||
| CY7C1041GE-10VXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 6,433 | ||
MC100EL56DWR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,906 | ||
| CY7C1020D-10VXIT | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 4,500 | ||
MC100LVEP11DG![]() | onsemi | Stock RoHS : Compliant | 2,488 | |||
| CY7C1021BNL-15ZXIT | Cypress Semiconductor | Stock RoHS : Compliant | 1,862 | |||
CY7C1361C-100AJXC![]() | Cypress Semiconductor | Stock RoHS : Compliant | 1,138 | |||
| CY7C1009B-15VC | Infineon Technologies AG | Stock, Ship Today |
| 138 | ||
![]() Pasternack Enterprises US | PE3C10286-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum SMA Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum SMA male to TNC male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum SMA male to TNC male low loss cable 12 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10286-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10286-12 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10286-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 202 | |
| PE3C100064-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 12 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100064-12 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100064-12 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100064-12 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100064-12 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100064-12 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 30 | ||
| PE3C10105 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using PE-SR402FLJ Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3C10105 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10105 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. NEX10 plug to NEX10 plug cable assembly PE3C10105 is built with PE-SR402FLJ which is a formable coax type. The Pasternack low passive intermodulation formable NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 25 | |||
| PE3C100022 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. 1.0mm Male to 1.0mm Female Armored Low Loss Test Cable., Radio frequency assembly 1.0mm male to 1.0mm female armored low loss test cable from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm female armored low loss test cable, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100022 can also be known as a low loss test 1.0mm plug to 1.0mm jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100022 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100022 can also be used in the other direction and will be a 1.0mm female to 1.0mm male cable assembly if the opposite connectivity is required. Low loss test 1.0mm male to 1.0mm female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. | 7 | |||
| PE3C10265-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Nickel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assembly has male gender on end 1 and male on end 2. PE3C10265-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10265-24 RF cable has a PE jacket of 0.590-inch diameter. The RF cable has an in-series connection. N type plug to type N plug cable assembly PE3C10265-24 is built with LMR-600-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with type N to N type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a nickel body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N and N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2 | ||
| PE3C100059 | Pasternack Enterprises | 0 | ||||
| PE3C10024 | Pasternack Enterprises | 0 | ||||
| PE3C10079-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to TNC Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC female bulkhead cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female bulkhead cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C10079-12 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC jack cable assembly PE3C10079-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10079-12 can also be used in the other direction and will be TNC female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10092-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Female to N Male Right Angle Cable 6 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to N male right angle cable 6 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to N male right angle cable 6 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has female gender on end 1 and male on end 2. PE3C10092-6 can also be known as a 3.5mm jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10092-6 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10092-6 can also be used in the other direction and will be right angle type N male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10102-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to N Male Right Angle Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to N male right angle cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N male right angle cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and right angle a type N cable connection on the other. Our a 2.92mm to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10102-24 can also be known as a 2.92mm plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to type N plug cable assembly PE3C10102-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10102-24 can also be used in the other direction and will be right angle type N male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1013LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Male to Reverse Polarity BNC Male Cable Using RG316 Coax, LF Solder. PE3C1013LF is a reverse polarity BNC male to reverse polarity BNC male cable using RG316 coax. This Pasternack reverse polarity BNC male to reverse polarity BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male BNC to reverse polarity male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1013LF BNC reverse polarity male to BNC reverse polarity male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C10150 | Pasternack Enterprises | 0 | ||||
| PE3C10187 | Pasternack Enterprises | 0 | ||||
| PE3C10231 | Pasternack Enterprises | 0 | ||||
| PE3C10268 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm N Male Low Loss Cable Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm N male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm N male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to N type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type N cable connection on the other. Our low loss BNC to type N cable assembly has male gender on end 1 and male on end 2. PE3C10268 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10268 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has a between series connection. BNC plug to type N plug cable assembly PE3C10268 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to N type cable connectors, has a 75 Ohm impedance. One connector features the crimp attachment method and a brass body with tri-metal plating, while the other has crimp/non-solder contact attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10268 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | TFCR0402-16W-C-1002BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10K;�0.1% RoHS : Compliant | 6,000 | ||
| TFCR0201-20W-C-1070DT | VENKEL LTD | Thin Film CR;0201;1/20W;�50PPM;107R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1012BT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;10.1K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1020CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;102R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1043CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;104K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1001DT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;1K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1022FT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;10.2K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1043CT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;104K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1050FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;105R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1051DT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;1.05K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1063BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;106K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-10R2DT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;10.2R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-1001CT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;1K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-1062FT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;10.6K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-1073CT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;107K ;�0.25% RoHS : Compliant | 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |