 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
C1008F-R18J Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 PEI Genesis | BACC63BP16C10S6H | Cinch Connectivity Solutions |
| 45 | ||
| BACC10JC10 | SOURIAU-SUNBANK |
| 0 | |||
| BACC10JC10 REV F | SOURIAU-SUNBANK |
| 0 | |||
| BACC10KC10 | SOURIAU-SUNBANK |
| 0 | |||
| BACC10KA20 | SOURIAU-SUNBANK |
| 0 | |||
| BACC63CC10-2AP9H | Cinch Connectivity Solutions |
| 0 | |||
| AIB6U20-23SC-C10 | Amphenol Corporation |
| 0 | |||
| APCMC107 | Amphenol Corporation |
| 0 | |||
| 3AC366XC1010DA | SOURIAU-SUNBANK |
| 0 | |||
| IPRLS-N-BL-C107-M40A-UL | Sure Seal Connections |
| 0 | |||
| IPSLS-1-R-C107-M40A-UL | Sure Seal Connections |
| 0 | |||
| FGL.3K.302.CLLC10 | LEMO connectors |
| 0 | |||
| J1341-158A100B-1C-10 | SOURIAU-SUNBANK |
| 0 | |||
| 10-6460C1-001 | Amphenol Corporation |
| 0 | |||
| 85106JC107S50 | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
 PUI | FSC-10A | 2,950 | ||||
| MSC-100MA | 2,493 | |||||
| TSC-10A | OptiFuse | RoHS : Compliant | 1,569 | |||
| BLC-108-G | OptiFuse | RoHS : Compliant | 1,055 | |||
| LPR-13C-10R | 984 | |||||
| BLC-108 | OptiFuse | RoHS : Compliant | 570 | |||
| KBPC1010W-G | 400 | |||||
| 9111-46241C10PU | 315 | |||||
| 8206-B2X20C10RPL1T-I10 | 253 | |||||
| BLC-108-C | OptiFuse | RoHS : Compliant | 64 | |||
| FSC-10A-BP | 18 | |||||
| FSC-10A-BX | 18 | |||||
| MSC-10A-BP | 10 | |||||
| TSC-10A-BX | 8 | |||||
| 9111-52301C10DU | 3 | |||||
 Braemac Americas-Symmetry | ASDMPAC-100.0000MHZ-VR-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ASFLMPAC-100.0000MHZ-X-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAHC-100.0000MHZ-X-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPAHC-100.0000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-1R5J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-2R7G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R027K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R12M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R33J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008HQ-22NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008HQ-82NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AR50LC-10.000MHZ-SAA | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASDMPAHC-100.0000MHZ-X-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPAC-100.0000MHZ-LR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPAC-100.0000MHZ-L-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | C0603C101M5GAC7867 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | |
12061C104KAT1A | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,255 | ||
| MBB02070C1000FC100 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | ||
| C0402C101J3GAC7867 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | ||
| C1005C-6N8K-T02K | SAGAMI ELEC CO LTD | IN STOCK SHIP TODAY | 2,000 | |||
| C1005X7R1C103KT000F | TDK Corporation | IN STOCK SHIP TODAY | 1,000 | |||
| 22255C105JATMA | Kyocera AVX Components | IN STOCK SHIP TODAY |
| 900 | ||
C1005X6S1C105K050BC | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| RLR05C10R0GS | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 243 | ||
| C1005X5R1C105MT000E | TDK Corporation | IN STOCK SHIP TODAY |
| 200 | ||
| RN55C1001B | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 190 | ||
| C1005X5R1C105K050BC | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| C052C103K5R5CA | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 100 | ||
| PVC105-3/8-100C | Alpha Wire | IN STOCK SHIP TODAY |
| 26 | ||
AM27C1024-175DC | AMD | IN STOCK SHIP TODAY RoHS : Not Compliant | 7 | |||
 DB Roberts | NAS620C10L.D | Military Specifications | FLAT WASHERS DFARS Compliant Required |
| 3,330 | |
| SHC1032X1-1/4-STL-BO | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 376 | ||
| BSC1032X3/8-SS-PAS967 | BUTTON HEAD SOCKET | BUTTON SOCKET CAP SCREW STAINLESS |
| 157 | ||
| BSC1032X1/2-TX-PIN-SS | BUTTON HEAD SOCKET | Button Head Socket Cap Screw |
| 130 | ||
| SHC1032X3/8-SS-NYPA | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 124 | ||
| C2132-C10P | Accuride International |
| 110 | |||
| SHC1032X1-3/8-STL | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 80 | ||
| BSC1032X3/4-STL-ZI | BUTTON HEAD SOCKET | Button Head Socket Cap Screw |
| 50 | ||
| PT-1-1C109-20B-KA | Southco | Use the enhanced security of these affordable tubular-key cam locks to upgrade cam lock performance in a broad range of enclosure applications. Multiple housing and cam dimension options satisfy a wide variety of enclosure configurations and the chrome-p | 0 | |||
| CM-3-4C109-NUB | Southco | Compact design and sizes straightforward operation and economical configuration options make them an excellent choice for small cabinet and enclosure doors. | 0 | |||
| LW-1764-4C1-060 | Southco | 0 | ||||
| PT-1-5C101-20L-KD | Southco | Use the enhanced security of these affordable tubular-key cam locks to upgrade cam lock performance in a broad range of enclosure applications. Multiple housing and cam dimension options satisfy a wide variety of enclosure configurations and the chrome-p | 0 | |||
| AC-10-EM-391-11 | Southco | AC-10-EM-391-11 | 0 | |||
| PT-1-3C109-20B-KD | Southco | Use the enhanced security of these affordable tubular-key cam locks to upgrade cam lock performance in a broad range of enclosure applications. Multiple housing and cam dimension options satisfy a wide variety of enclosure configurations and the chrome-p | 0 | |||
| C-104 | GRIPCO STANLEY | 0 | ||||
 EBV Elektronik | BSC100N06LS3GATMA1 | Infineon Technologies AG | Power MOSFET N Channel 60 V 55 A 10 Milliohms TDSON 8 Pins Surface Mount (Alt: SP000453664) RoHS : Compliant | 485,000 | ||
TSC101AILT | STMicroelectronics | Current Sense Amp Single 500kHz 4V to 24V 5Pin SOT23 TR (Alt: TSC101AILT) RoHS : Compliant | 54,000 | |||
| BZD27C100P-HE3_A08 | Vishay Intertechnologies | (Alt: BZD27C100P-HE3_A08) RoHS : Compliant | 27,000 | |||
BZD27C100P-E3-08 | Vishay Intertechnologies | 150W 100V ZENER DIODE SMF (Alt: BZD27C100P-E3-08) RoHS : Compliant | 24,000 | |||
| AZ23C10-E3-08 | Vishay Intertechnologies | (Alt: AZ23C10-E3-08) RoHS : Compliant | 12,000 | |||
| BZX84C10-G3-08 | Vishay Intertechnologies | (Alt: BZX84C10-G3-08) RoHS : Compliant | 9,000 | |||
TSC102IDT | STMicroelectronics | Current Sense Amp Single 1MHz 35V to 55V 8Pin SOIC N TR (Alt: TSC102IDT) RoHS : Compliant | 2,500 | |||
PN5321A3HN/C106,55 | NXP Semiconductors | NFC Controller IC I2C SPI UART HVQFN FeliCa ISOIEC 14443 Type AB ISOIEC 18092 MIFARE (Alt: PN5321A3HN/C106,55) RoHS : Compliant | 2,450 | |||
| PN7160A1HN/C100E | NXP Semiconductors | NFC Controller IC I2C FeliCa ISOIEC 14443A14443B1569318092 NFC Forum 40 Pins HVQFNEP (Alt: PN7160A1HN/C100E) RoHS : Compliant | 980 | |||
| CY7C1041GN-10ZSXI | Infineon Technologies AG | SRAM Chip Async Single 5V 4MBit 256K x 16 10ns 44Pin TSOPII (Alt: SP005648559) RoHS : Compliant | 675 | |||
DSC1001DI5-002.4576-2.50-mm-x-2.00-mm.jpg) | Microchip Technology Inc | (Alt: DSC1001DI5-002.4576) RoHS : Compliant | 560 | |||
| DSC1001DL5-032.0000 | Microchip Technology Inc | MEMS Oscillator 32 MHz SMD 25mm x 2mm 10 ppm 33 V DSC1001 (Alt: DSC1001DL5-032.0000) RoHS : Compliant | 420 | |||
| STPSC10H065D | STMicroelectronics | (Alt: STPSC10H065D) RoHS : Compliant | 150 | |||
ATF16LV8C-10JU | Microchip Technology Inc | SPLD ATF16LV8C Family 250 Gates 8 Macro Cells 833MHz CMOS Technology 33V5V 20Pin PLCC (Alt: ATF16LV8C-10JU) RoHS : Compliant | 144 | |||
DSC1001CI5-025.0000-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS Oscillator 25 MHz SMD 32mm x 25mm 10 ppm 33 V DSC1001 (Alt: DSC1001CI5-025.0000) RoHS : Compliant | 110 | |||
 ECCO | C10-690206-001 | Amphenol Industrial Operations |
| 300 | ||
| C10-613447-001 | Amphenol Industrial Operations |
| 100 | |||
| C10-765498-090 | Amphenol Industrial Operations |
| 100 | |||
| C10-731006-070 | Amphenol Industrial Operations |
| 100 | |||
| C10-730653-040 | Amphenol Industrial Operations |
| 100 | |||
| C10-766624-050 | Amphenol Industrial Operations |
| 100 | |||
| C10-765499-100 | Amphenol Industrial Operations |
| 100 | |||
| C10-765498-070 | Amphenol Industrial Operations |
| 100 | |||
| C10-766101-016 | Amphenol Industrial Operations |
| 100 | |||
| C10-731006-080 | Amphenol Industrial Operations |
| 100 | |||
| C10-752804-000 | Amphenol Industrial Operations |
| 90 | |||
| C10-737887-053 | Amphenol Industrial Operations |
| 19 | |||
| C10-670060-005 | Amphenol Industrial Operations |
| 17 | |||
| C10-737238-003 | Amphenol Industrial Operations |
| 15 | |||
| C10-737307-000 | Amphenol Industrial Operations |
| 5 | |||
 Flip Electronics | MC100LVEP16DG | onsemi | Stock, Ship Today RoHS : Compliant | 35,742 | ||
| FDPC1012S-P | onsemi | Stock, Ship Today RoHS : Compliant | 23,689 | |||
| CY7C1361C-100AXET | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant | 16,853 | |||
| CY7C1041G30-10BAJXE | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 13,502 | ||
| CY7C1061GE30-10BVJXIT | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 12,755 | ||
CY7C1021BN-15ZXCT | Cypress Semiconductor | Stock RoHS : Compliant | 10,738 | |||
| CY7C1062AV33-10BGC | Infineon Technologies AG | Stock, Ship Today | 9,427 | |||
MC100EP016AFAG | onsemi | Stock RoHS : Compliant | 6,000 | |||
MC100E016FNR2G | onsemi | Stock, Ship Today RoHS : Compliant | 3,927 | |||
MC100LVEL34DTG | onsemi | Stock RoHS : Compliant | 2,500 | |||
| CY7C1051H30-10ZSXE | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 1,856 | ||
| CY7C1062GE30-10BGXIT | Infineon Technologies AG | Stock RoHS : Compliant | 500 | |||
| CY7C1034DV33-10BGXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 219 | ||
| CY7C1061GE18-15ZSXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 185 | ||
| MC100EP32DTG | onsemi | Stock, Ship Today RoHS : Compliant |
| 100 | ||
 Pasternack Enterprises US | PE3C10282 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm. Plenum N Male to N Male Low Loss Cable Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10282 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10282 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 460 | ||
| PE3C10273-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum BNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our low loss a BNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10273-12 can also be known as a low loss BNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10273-12 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to TNC plug cable assembly PE3C10273-12 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10273-12 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 190 | ||
| PE3C10066-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to N Male Cable 12 Inch Length Using Tinned RG402 Coax., Radio frequency assembly N female bulkhead to N male cable 12 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N male cable 12 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3C10066-12 can also be known as a type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our bulkhead type N female to type N male cable has a maximum VSWR of 1.5:1. Type N jack to type N plug cable assembly PE3C10066-12 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10066-12 can also be used in the other direction and will be a type N male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 156 | ||
| PE3C10289-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-LLPX, RF Cable Type: LMR-600-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum TNC Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-600-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum TNC male to TNC male low loss cable 24 inch length using LMR-600-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum TNC male to TNC male low loss cable 24 inch length using LMR-600-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10289-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE dielectric type. Our PE3C10289-24 RF cable has a Fluoropolymer jacket of 0.565-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance. This RF cable assembly features 4000 Vdc max DC voltage. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 33 | ||
| PE3C100067-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to 2.92mm Female Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100067-24 low loss test 2.92mm male to 2.92mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100067-24 can also be known as a low loss test 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100067-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100067-24 2.92mm plug to 2.92mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100067-24 can also be used in the other direction and will be a 2.92mm jack to 2.92mm plug cable assembly if the opposite connectivity is required. This low loss test 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10031/HS | Pasternack Enterprises | 0 | ||||
| PE3C10075 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female Bulkhead to TNC Male Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10075 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10075 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10075 can also be used in the other direction and will be TNC male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3C10079-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to TNC Female Bulkhead Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female bulkhead cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C10079-18 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC jack cable assembly PE3C10079-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10079-18 can also be used in the other direction and will be TNC female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10086-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female Bulkhead to TNC Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10086-9 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10086-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10086-9 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10090-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Male to N Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 3.5mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3C10090-24 can also be known as a 3.5mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N jack cable assembly PE3C10090-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10090-24 can also be used in the other direction and will be type N female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10156 | Pasternack Enterprises | 0 | ||||
| PE3C10200 | Pasternack Enterprises | 0 | ||||
| PE3C10237 | Pasternack Enterprises | 0 | ||||
| PE3C10261-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 60 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 60 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-60 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10268-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm N Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm N male low loss cable 36 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm N male low loss cable 36 inch length using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type N cable connection on the other. Our low loss BNC to N type cable assembly has male gender on end 1 and male on end 2. PE3C10268-36 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10268-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has a between series connection. BNC plug to type N plug cable assembly PE3C10268-36 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to N type cable connectors, has a 75 Ohm impedance. One connector features the crimp attachment method and a brass body with tri-metal plating, while the other has crimp/non-solder contact attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10268-36 can also be used in the other direction and will be N type male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Venkel Ltd. | HPTF0603-QC-1022UT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�50PPM;10.2K;�0.01% RoHS : Compliant | 0 | ||
| HPTF0603-SC-1001DT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;1K;�0.5% RoHS : Compliant | 0 | |||
| HPTF0603-SC-1022AT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;10.2K;�0.05% RoHS : Compliant | 0 | |||
| HPTF0603-SC-10R5FT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�50PPM;10.5R;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RC-1050UT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�50PPM;105R;�0.01% RoHS : Compliant | 0 | |||
| HPTF0805-TC-1002BT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;10K;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-TC-1071FT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;1.07K;�1% RoHS : Compliant | 0 | |||
| HPTF1206-TC-1052UT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�50PPM;10.5K;�0.01% RoHS : Compliant | 0 | |||
| HPTF1206-UC-1050FT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;105R;�1% RoHS : Compliant | 0 | |||
| HPTF1206-UC-1071CT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;1.07K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1002FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;10K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1023CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;102K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1052AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;10.5K;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UC-1003FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;100K ;�1% RoHS : Compliant | 0 | |||
| HPTF2010-UC-1053AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;105K ;�0.05% RoHS : Compliant | 0 | |||
 Win Source Electronics | C1005X5R1C105KT000E | TDK Corporation | RoHS : Compliant |
| 290,000 | |
| TAJC107K010RNJ C 10V107K | Kyocera AVX Components | CAP TANT 100UF 10V 10% 2312 |
| 200,000 | ||
| C1608X7R1C105KT000N | TDK Corporation |
| 100,000 | |||
| C1005X7R1C104KT000F | TDK Corporation | Cap Ceramic 0.1uF 16V X7R 10% |
| 71,000 | ||
| CPC1001N | IXYS Integrated Circuits Division | OPTOISOLATOR 1.5KV TRANS 4SMD RoHS : Compliant |
| 20,447 | ||
| DAC101C081CIMK | National Semiconductor Corporation | 10-Bit Micro Power Digital-to-Analog Converter with an I2C-Compatible Interface RoHS : Compliant |
| 16,150 | ||
| IPC100N04S5-1R2 | Infineon Technologies AG | MOSFET 40V, N-Ch, 1.2 mΩ max, AutoG , SS08 (5x6), OptiMOS-5 RoHS : Compliant |
| 15,000 | ||
| CY7C1049GN30-10ZSXIT | Cypress Semiconductor | IC SRAM 4M PARALLEL 44TSOP II RoHS : Compliant |
| 13,920 | ||
| C0402C103K4RACAUTO | KEMET Corporation | CAP CER 10000PF 16V X7R 0402 / 10000 pF ±10% 16V Ceramic Capacitor X7R 0402 (1005 Metric) RoHS : Compliant |
| 13,115 | ||
| C1005X5R1A105K050BB | TDK Corporation | CAP CER 1UF 10V X5R 0402 RoHS : Compliant |
| 13,000 | ||
| HMC1010LP4E | Analog Devices Inc | RMS POWER DETECTOR DC - 3.9 GHz | IC RF DETECT 0HZ-3.9GHZ 24QFN RoHS : Compliant |
| 10,324 | ||
| BZX84C10TS-7-F | Diodes Incorporated | DIODE ZENER ARRAY 10V SOT363 RoHS : Compliant |
| 7,600 | ||
IVC102U/2K5 | Texas Instruments | IC OPAMP TRANSIMP 2MHZ 14SOIC RoHS : Compliant |
| 4,610 | ||
| ADC102S101CIMM | Texas Instruments | ADC102S101 2 Channel, 500 ksps to 1 Msps, 10-Bit A/D Converter | IC ADC 10BIT SAR 8VSSOP RoHS : Not Compliant |
| 2,000 | ||
| CY7C1021D-10ZSXI | Cypress Semiconductor | IC SRAM 1MBIT 10NS 44TSOP RoHS : Compliant |
| 2,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand