C138L-S16-R Price, Distributor, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 TNC Male (Plug) to TNC Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male (plug) to TNC male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1382/WP-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1382/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1382/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

PE3C1387/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MMCX Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to MMCX plug low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss SMA to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1387/HS-36 can also be known as a low loss SMA plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1387/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C1387/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1387/HS-36 can also be used in the other direction and will be a MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3C1380LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50. SMA Male Right Angle to N Male Right Angle Cable Using PE-SR402FL Coax, RoHS. PE3C1380LF is a SMA male right angle to type N male right angle cable using PE-SR402FL coax. This Pasternack SMA male right angle to type N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N type for connector 2. SMA right angle to N type right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male type N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1380LF SMA male right angle to type N male right angle cable assembly is constructed with PE-SR402FL coax.

PE3C1382/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Low Loss Cable Using LMR-400 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1382/HS can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1382/HS is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable using LMR-400 coax with Times Microwave components with heatshrink.

PE3C1382/WP-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 TNC Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1382/WP-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1382/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1382/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3C1387/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MMCX Plug Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to MMCX plug low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss SMA to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1387/HS can also be known as a low loss SMA plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1387/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C1387/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1387/HS can also be used in the other direction and will be a MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C1380/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Right Angle Cable Using PE-SR402FL Coax with HeatShrink. PE3C1380/HS is a SMA male right angle to N male right angle cable using PE-SR402FL coax. This Pasternack SMA male right angle to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C1380/HS SMA male right angle to N male right angle cable assembly is constructed with PE-SR402FL coax.

PE3C1382LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400 Coax with HeatShrink, RoHS. PE3C1382LF/HS is a TNC male to TNC male cable using LMR-400 coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1382LF/HS TNC male to TNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C1387/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to MMCX Plug Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to MMCX plug low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss SMA to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1387/HS-24 can also be known as a low loss SMA plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1387/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C1387/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1387/HS-24 can also be used in the other direction and will be a MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3C1381/HS2

Pasternack Enterprises

PE3C1387/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to MMCX Plug Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to MMCX plug low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss SMA to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C1387/HS-100CM can also be known as a low loss SMA plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1387/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3C1387/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1387/HS-100CM can also be used in the other direction and will be a MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE3C1389

Pasternack Enterprises

PE3C1382/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1382/HS-12 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1382/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 12 inch length using LMR-400 coax with Times Microwave components with heatshrink.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3C1383/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Jack, Connector 1 Polarity: RP, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: RP, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Jack Bulkhead to Reverse Polarity SMA Plug Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA jack bulkhead to reverse polarity SMA plug right angle low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA jack bulkhead to reverse polarity SMA plug right angle low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with rp SMA bulkhead cable connection on one end and right angle rp SMA cable connection on the other. Our low loss rp SMA to right angle rp SMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3C1383/HS can also be known as a low loss rp SMA female to right angle rp SMA male cable assembly and will be shipped same-day as it is purchased. Rp SMA female to rp SMA male cable assembly PE3C1383/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible rp SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this rp SMA jack bulkhead to rp SMA right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1383/HS can also be used in the other direction and will be right angle rp SMA plug to rp SMA jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMA rp female bulkhead to SMA rp right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA jack bulkhead to reverse polarity SMA plug right angle low loss cable using LMR-100 coax with heatshrink.

PE3C1382/WP-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 TNC Male (Plug) to TNC Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male (plug) to TNC male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1382/WP-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1382/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1382/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

Venkel Ltd.

TFCR0402-16W-C-1381FT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;1.38K;�1%
RoHS : Compliant

TFCR0603-10W-C-1381FT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;1.38K;�1%
RoHS : Compliant

TFCR0805-10W-C-1383CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;138K ;�0.25%
RoHS : Compliant

TFCR1206-4W-C-1380DT

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;138R;�0.5%
RoHS : Compliant

TFCR1206-4W-C-1383DT-1K

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;138K ;�0.5%
RoHS : Compliant

TFCR2010-4W-C-1381CT

VENKEL LTD

Thin Film CR;2010;1/4W;�50PPM;1.38K;�0.25%
RoHS : Compliant

TFCR2512-2W-C-1383BT

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;138K ;�0.1%
RoHS : Compliant

TFCR0603-16W-C-1382FT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;13.8K;�1%
RoHS : Compliant

TFCR0805-10W-C-1380CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;138R;�0.25%
RoHS : Compliant

TFCR0805-8W-C-1382CT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;13.8K;�0.25%
RoHS : Compliant

TFCR1206-4W-C-1380DT-1K

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;138R;�0.5%
RoHS : Compliant

TFCR1206-8W-C-1382DT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;13.8K;�0.5%
RoHS : Compliant

TFCR2010-4W-C-1382DT-1K

VENKEL LTD

Thin Film CR;2010;1/4W;�50PPM;13.8K;�0.5%
RoHS : Compliant

TFCR0402-16W-C-1380CT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;138R;�0.25%
RoHS : Compliant

TFCR0603-10W-C-1382FT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;13.8K;�1%
RoHS : Compliant

Vyrian

LTC1380CGN-TRPBF

Analog Devices Inc

10,894

LTC1384IG-PBF

Analog Devices Inc

9,468

LTC1383CN#PBF

Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP16
RoHS : Compliant

9,364

SN74LVC138APWE4

Texas Instruments

Decoder/Driver, LVC/LCX/Z Series, Inverted Output, CMOS, PDSO16
RoHS : Compliant

8,935

SN74AHC138PWG4

Texas Instruments

Decoder/Driver, AHC/VHC/H/U/V Series, Inverted Output, CMOS, PDSO16
RoHS : Compliant

8,650

LTC1385IG

Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, PDSO20
RoHS : Not Compliant

8,280

LTC1386CS#PBF

Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16
RoHS : Compliant

8,127

SN74HC138DR-00

Texas Instruments

Decoder/Driver, HC/UH Series, Inverted Output, CMOS, PDSO16

7,921

CD74HC138M96G4

Texas Instruments

Decoder/Driver, HC/UH Series, Inverted Output, CMOS, PDSO16
RoHS : Compliant

7,704

SN54HC138FKR

Texas Instruments

Decoder/Driver, HC/UH Series, Inverted Output, CMOS, CQCC20

6,731

SN74AHC138NSRG4

Texas Instruments

Decoder/Driver, AHC/VHC/H/U/V Series, Inverted Output, CMOS, PDSO16
RoHS : Compliant

6,521

SN74HC138NP1

Texas Instruments

Decoder/Driver, CMOS, PDIP16
RoHS : Not Compliant

4,862

SNC54HC138FH

Texas Instruments

Decoder/Driver, CMOS, CQCC20
RoHS : Not Compliant

4,013

SN74HC138N-P2

Texas Instruments

3,457

74LVC138APW-Q100/CU

Nexperia

Decoder/Driver, LVC/LCX/Z Series, Inverted Output, CMOS, PDSO16
RoHS : Compliant

2,700

Win Source Electronics

74HC138D/N

onsemi

4,675 : $0.0831
3,740 : $0.0866
2,875 : $0.09
2,005 : $0.0969
1,290 : $0.1004
605 : $0.1073

246,060

MC74HC138ADTR2G

onsemi

IC DECODER/DEMUX 1:8 16-TSSOP
RoHS : Compliant

795 : $0.3782
595 : $0.4218
460 : $0.4364
335 : $0.4509
215 : $0.4655
90 : $0.5673

150,000

SN74HC138D

Texas Instruments

3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS | IC 3-8 LINE DECOD/DEMUX 16-SOIC
RoHS : Compliant

2,685 : $0.1119
2,150 : $0.1164
1,655 : $0.121
1,155 : $0.13
745 : $0.1346
350 : $0.1437

107,496

SN74HC138DRG4

Texas Instruments

3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS
RoHS : Compliant

2,685 : $0.1119
2,150 : $0.1164
1,655 : $0.121
1,155 : $0.13
745 : $0.1346
350 : $0.1437

56,520

SN74HC138DG4

Texas Instruments

IC DECODER/DEMUX 1X3:8 16SOIC / Decoder/Demultiplexer 1 x 3:8 16-SOIC
RoHS : Compliant

2,685 : $0.1119
2,150 : $0.1164
1,655 : $0.121
1,155 : $0.13
745 : $0.1346
350 : $0.1437

54,640

74LVC138APW

Nexperia

3-to-8 line decoder/demultiplexer; inverting
RoHS : Compliant

3,605 : $0.0933
2,885 : $0.0971
2,225 : $0.1008
1,550 : $0.1084
1,000 : $0.1122
470 : $0.1198

42,500

74LVC138ABQ

Nexperia

3-to-8 line decoder/demultiplexer; inverting
RoHS : Compliant

405 : $0.7455
325 : $0.7758
250 : $0.8061
175 : $0.8667
115 : $0.897
55 : $0.9576

36,296

SN74AHC138PWR

Texas Instruments

IC 3-8 LINE DECODR/DEMUX 16TSSOP / Decoder/Demultiplexer Single 3-to-8 16-Pin TSSOP T/R
RoHS : Compliant

1,575 : $0.1907
1,180 : $0.2127
910 : $0.2201
660 : $0.2274
430 : $0.2347
175 : $0.2861

29,513

SN74AHC138DG4

Texas Instruments

IC DECODER/DEMUX 1X3:8 16SOIC / Decoder/Demultiplexer 1 x 3:8 16-SOIC
RoHS : Compliant

1,045 : $0.322
840 : $0.3351
645 : $0.3482
450 : $0.3744
290 : $0.3875
140 : $0.4136

20,200

SN74LVC138APWRG4

Texas Instruments

3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS
RoHS : Compliant

1,240 : $0.2423
995 : $0.2522
765 : $0.262
535 : $0.2817
345 : $0.2916
165 : $0.3113

16,210

LTC1387ISW#PBF

Linear Technology

IC TXRX RS232/485/422 MULTIPRTCL
RoHS : Compliant

24 : $12.9559
18 : $14.4509
14 : $14.9492
10 : $15.4475
7 : $15.9458
3 : $19.4339

9,999

SN74LVC138ADRE4

Texas Instruments

IC DECODER/DEMUX 1X3:8 16SOIC / Decoder/Demultiplexer 1 x 3:8 16-SOIC
RoHS : Compliant

650 : $0.518
520 : $0.5391
400 : $0.56
280 : $0.6021
180 : $0.6232
85 : $0.6653

6,740

MC13892DJVL

Freescale Semiconductor

IC PWR MGMT I.MX35/51 186BGA
RoHS : Compliant

30 : $11.2783
24 : $11.7482
19 : $12.2182
13 : $13.158
9 : $13.6279
4 : $14.5677

3,140

LTC1387IG

Linear Technology

Single Transmitter/Receiver RS-232/RS-485 20-Pin SSOP / Single 5V RS232/RS485 Multiprotocol Transceiver
RoHS : Not Compliant

22 : $13.9773
18 : $14.5455
14 : $15.1137
10 : $16.2501
6 : $16.8182
3 : $17.9546

1,800

MM74HC138N

Fairchild Semiconductor Corporation

3-to-8 Line Decoder
RoHS : Compliant

835 : $0.4672
625 : $0.521
480 : $0.5391
350 : $0.557
230 : $0.5749
95 : $0.7006

145

C138L-S16-R Distributor

Link URL