Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.NET

X  



C574L-P20-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

ComSIT USA
SPC5746BHK1AMKU6

NXP Semiconductors AVAILABLE EU
RoHS : Compliant
8,233

Interstate Connecting Components
C574393001

TE Connectivity Cross Referenced to TE CNTY RAYCHEM - Part: RYCFLT0111-0.25-3
0

Powell Electronics
SC574-30

Hammond Manufacturing M4 X 30MM SS SCREW -30 Pack
1 : $6.53
25 : $6.09
30 : $5.71
3

Flip Electronics
MC74VHC574DTR2G

onsemi Stock, Ship Today
RoHS : Compliant
1 : $0.17
107,500
NLV74HC574ADTR2G

onsemi Stock, Ship Today
RoHS : Compliant
28,047
SPC5748CK1MMJ6R

NXP Semiconductors Stock, Ship Today
1 : $28.25
11,182
SPC5748CSK0ACKU2

NXP Semiconductors Stock
RoHS : Compliant
7,955
SPC5745CBK1AMMJ6

NXP Semiconductors Stock, Ship Today
RoHS : Compliant
1 : $32.07
2,373
SPC5746BK1AMMH2

NXP Semiconductors Stock, Ship Today
1 : $13.84
2,319
SPC5748GK0AMMJ6R

NXP Semiconductors Stock
RoHS : Compliant
1,600
SPC5748GK1MMJ6R

NXP Semiconductors Stock
RoHS : Compliant
1,600
SPC5748GBK0AVKU6

NXP Semiconductors Stock
RoHS : Compliant
1,200
SPC5746CSK1AMKU6

NXP Semiconductors Stock, Ship Today
RoHS : Compliant
1 : $25.41
241
SPC5746CK1AMKU6R

NXP Semiconductors Stock
RoHS : Compliant
241
SPC5746CBK1AMKU6

NXP Semiconductors Stock, Ship Today
RoHS : Compliant
1 : $24.73
159
MPC574XG-176DS

NXP Semiconductors Stock
46
MPC5746R-176DS

NXP Semiconductors Stock
42
MPC5746R-252DS

NXP Semiconductors Stock
30

Master Electronics
MC74HC574ADWR2G

onsemi A high-performance silicon-gate CMOS octal D-type flip-flop with 3-state noninverting outputs.
RoHS : Compliant
50,000 : $0.2476
25,000 : $0.2482
15,000 : $0.2488
10,000 : $0.2524
8,000 : $0.2531
5,000 : $0.2537
3,000 : $0.2585
1,000 : $0.2635
5,000
MC74HC574ADWG

onsemi Octal 3-State Non-inverting D Flip-Flop
RoHS : Compliant
15,010 : $0.4448
10,032 : $0.4459
7,524 : $0.4507
5,016 : $0.4535
2,508 : $0.4546
1,026 : $0.4591
532 : $0.4637
76 : $0.5268
1,824
MC74VHC574DTR2G

onsemi Octal D Flip-Flop with 3-State Outputs
RoHS : Compliant
2,500 : $0.447
1,875 : $0.4561
1,250 : $0.4887
625 : $0.6516
0
MC74HC574ADWR2G-Q

onsemi OCTAL D-TYPE 3-STATE FF
RoHS : Compliant
25,000 : $0.2743
15,000 : $0.2777
8,000 : $0.284
5,000 : $0.2847
3,000 : $0.2921
1,000 : $0.3073
500 : $0.3081
100 : $0.3357
0
SC574-30

Hammond Manufacturing M4 X 30MM SS SCREW -30 Pack
RoHS : Compliant
2,500 : $5.86
1,000 : $6.09
500 : $6.24
250 : $6.26
100 : $6.82
50 : $7.12
25 : $7.14
5 : $8.79
0
AAC5747-00

TE Connectivity 100P2315-3B-15-07-L40-CHP MOQ Reduction
RoHS : Compliant
25 : $443.18
19 : $452.22
13 : $640.71
7 : $1,127.26
0
MM74HC574MTCX

onsemi 3-STATE Octal D-Type Edge-Triggered Flip-Flop
RoHS : Compliant
2,500 : $0.3681
1,875 : $0.3756
1,250 : $0.4024
625 : $0.5366
0
74VHC574MTC

onsemi Octal D-Type Flip-Flop with 3-STATE Outputs
RoHS : Compliant
15,000 : $0.3292
10,050 : $0.33
7,500 : $0.3309
5,025 : $0.3317
2,550 : $0.3333
1,050 : $0.3891
525 : $0.4057
75 : $0.4304
0
MC74VHC574DWG

onsemi Octal D Flip-Flop with 3-State Outputs
RoHS : Compliant
10,032 : $0.492
7,524 : $0.4932
5,016 : $0.5044
2,508 : $0.5057
1,026 : $0.5399
532 : $0.5459
266 : $0.5473
38 : $0.5963
0
MC74VHC574DWR2G

onsemi Octal D Flip-Flop with 3-State Outputs
RoHS : Compliant
15,000 : $0.4872
10,000 : $0.492
8,000 : $0.4932
5,000 : $0.5044
3,000 : $0.5057
1,000 : $0.5399
250 : $0.5707
50 : $0.5963
0

Pasternack Enterprises US
PE3C5747/HS

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Bulkhead Low Loss Cable Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.
2,095
PE3C5747/HS-12

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 12 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 12 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-12 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-12 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-12 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.
1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71
419
PE3C5747/HS-24

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-24 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-24 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-24 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.
1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43
419
PE3C5747/HS-60

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 60 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 60 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-60 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-60 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-60 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.
1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03
419
PE3C5747/HS-36

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 36 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C5747/HS-36 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5747/HS-36 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3C5747/HS-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5747/HS-36 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.
1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
419
PE3C5749

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male to Black FAKRA Jack Cable Using RG174 Coax., Radio frequency assembly BNC male to black FAKRA jack cable using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to black FAKRA jack cable using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and FAKRA cable connection on the other. Our BNC to FAKRA cable assemblies have a male gender on end 1 and jack on end 2. This BNC to FAKRA cable is a male to jack coax assembly, PE3C5749, can also be known as a BNC plug to FAKRA female cable assembly and will be shipped same-day as it is purchased. BNC plug to FAKRA female cable assembly PE3C5749 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5749 can also be used in the other direction and will be FAKRA jack to BNC male cable assembly if the opposite connectivity is required. BNC plug to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to FAKRA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to black FAKRA jack cable using RG174 coax.
0
PE3C5741

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Female to Straight Cut Lead Cable Using Tinned RG402 Coax., Radio frequency assembly SMA female to straight cut lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to straight cut lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5741, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5741 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5741 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to straight cut lead cable using tinned RG402 coax.
0
PE3C5748

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMC Plug Cable Using RG174 Coax., Radio frequency assembly SMB plug right angle to SMC plug cable using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMC plug cable using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMC cable connection on the other. Our right angle SMB to SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMC cable is a plug to plug coax assembly, PE3C5748, can also be known as a right angle SMB male to SMC male cable assembly and will be shipped same-day as it is purchased. SMB male to SMC male cable assembly PE3C5748 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5748 can also be used in the other direction and will be SMC plug to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMC plug cable using RG174 coax.
0
PE3C5747LF

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to TNC Male Cable Using PE-C100-LSZH Coax, LF Solder. PE3C5747LF is a TNC female bulkhead to TNC male cable using PE-C100-LSZH coax. This Pasternack TNC female bulkhead to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5747LF TNC female bulkhead to TNC male cable assembly is constructed with PE-C100-LSZH coax.
0
PE3C5744

Pasternack Enterprises Key Specifications, Connector Series 1: QN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. QN Female Bulkhead to QN Female Bulkhead Cable Using RG223 Coax., Radio frequency assembly QN female bulkhead to QN female bulkhead cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN female bulkhead to QN female bulkhead cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN bulkhead cable connection on one end and QN bulkhead cable connection on the other. Our QN to QN cable assemblies have a female gender on end 1 and female on end 2. This QN to QN cable is a female to female coax assembly, PE3C5744, can also be known as a QN jack to QN jack cable assembly and will be shipped same-day as it is purchased. QN jack to QN jack cable assembly PE3C5744 is built with RG223 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency QN female bulkhead to QN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QN jack bulkhead to QN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to QN cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN female bulkhead to QN female bulkhead cable using RG223 coax.
0
PE3C5742

Pasternack Enterprises Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Female to Straight Cut Lead Cable Using Tinned RG402 Coax., Radio frequency assembly 3.5mm female to straight cut lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to straight cut lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and straight cut lead cable connection on the other. Our 3.5mm to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This 3.5mm to straight cut lead cable is a female to sexless coax assembly, PE3C5742, can also be known as a 3.5mm jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to straight cut lead sexless cable assembly PE3C5742 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5742 can also be used in the other direction and will be straight cut lead sexless to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to straight cut lead cable using tinned RG402 coax.
0
PE3C5743/HS2

Pasternack Enterprises
0
PE3C5743

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to Snap-On QN Male Cable Using LMR-240-UF Coax., Radio frequency assembly N male to snap-on QN male cable using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to snap-on QN male cable using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and QN cable connection on the other. Our type N to QN cable assemblies have a male gender on end 1 and male on end 2. This type N to QN cable is a male to male coax assembly, PE3C5743, can also be known as a type N plug to QN plug cable assembly and will be shipped same-day as it is purchased. N type plug to QN plug cable assembly PE3C5743 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to QN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5743 can also be used in the other direction and will be QN male to type N male cable assembly if the opposite connectivity is required. N type plug to QN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to snap-on QN male cable using LMR-240-UF coax.
0
PE3C5746

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly SMA male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3C5746, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C5746 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5746 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable using LMR-195-LLPL coax.
0
PE3C5745

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly TNC male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3C5745, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C5745 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable using LMR-195-LLPL coax.
0

Vyrian
M74HC574B1R

STMicroelectronics Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP20
RoHS : Compliant
12,129
MC74HC574AF

onsemi Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
10,786
M74AC574M

STMicroelectronics
RoHS : Compliant
9,492
MC74HC574ADTR2

onsemi Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
8,445
MC74VHC574DWG

onsemi Bus Driver, AHC/VHC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
8,355
M74HC574TTR

STMicroelectronics Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
7,962
M74HC574RM13TR

STMicroelectronics Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
7,166
MC74HC574ANG

onsemi Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP20
RoHS : Compliant
6,268
M74HC574B1

STMicroelectronics
5,423
MC74HC574AFEL

onsemi Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
5,116
M74AC574MTR

STMicroelectronics
RoHS : Compliant
4,912
MC74VHC574DTG

onsemi Bus Driver, AHC/VHC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
4,158
MC74HC574ADWG

onsemi Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Compliant
4,084
MC74VHC574DW

onsemi Bus Driver, AHC/VHC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20
RoHS : Not Compliant
2,413
MC9S08QD2CSC,574

NXP Semiconductors Microcontroller
RoHS : Compliant
688

Win Source Electronics
SN74AHC574PWRE4

Texas Instruments IC FF D-TYPE SNGL 8BIT 20TSSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant
880 : $0.3422
660 : $0.3816
510 : $0.3948
370 : $0.4079
240 : $0.4211
100 : $0.5132
66,150
SN74AHC574PWR

Texas Instruments IC D-TYPE POS TRG SNGL 20TSSOP
RoHS : Compliant
1,725 : $0.174
1,290 : $0.1941
1,000 : $0.2008
725 : $0.2074
470 : $0.2141
195 : $0.261
65,800
SN74LVC574APWR

Texas Instruments IC D-TYPE POS TRG SNGL 20TSSOP
RoHS : Compliant
805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788
58,510
SN74HC574DWRG4

Texas Instruments OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
RoHS : Compliant
1,235 : $0.2727
925 : $0.3042
715 : $0.3147
520 : $0.3251
335 : $0.3357
140 : $0.409
32,950
SN74HC574DW

Texas Instruments IC D-TYPE POS TRG SNGL 20SOIC
RoHS : Compliant
1,025 : $0.2931
765 : $0.327
595 : $0.3382
430 : $0.3495
280 : $0.3608
115 : $0.4397
30,000
SN74HC574NS

Texas Instruments IC FF D-TYPE SNGL 8BIT 20SO
860 : $0.3499
645 : $0.3902
500 : $0.4037
360 : $0.4171
235 : $0.4306
100 : $0.5248
26,000
SN74HC574NSR

Texas Instruments IC D-TYPE POS TRG SNGL 20SO
RoHS : Compliant
860 : $0.3499
645 : $0.3902
500 : $0.4037
360 : $0.4171
235 : $0.4306
100 : $0.5248
26,000
SN74HC574NG4

Texas Instruments IC FF D-TYPE SNGL 8BIT 20DIP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-DIP (0.300", 7.62mm)
665 : $0.5058
500 : $0.5643
385 : $0.5836
280 : $0.6031
180 : $0.6226
75 : $0.7587
20,000
MC74HC574ADW

onsemi IC FLIP FLOP OCT D 3ST 20-SOIC
RoHS : Not Compliant
2,305 : $0.1684
1,725 : $0.1878
1,335 : $0.1943
970 : $0.2008
625 : $0.2072
260 : $0.2526
20,000
SN74HC574PWT

Texas Instruments OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS | IC FF D-TYPE SNGL 8BIT 20TSSOP
RoHS : Compliant
820 : $0.4113
655 : $0.428
505 : $0.4448
355 : $0.4781
230 : $0.4948
110 : $0.5283
11,420
SN74HC574PWRG4

Texas Instruments IC FF D-TYPE SNGL 8BIT 20TSSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant
820 : $0.4113
655 : $0.428
505 : $0.4448
355 : $0.4781
230 : $0.4948
110 : $0.5283
11,380
SN74HC574PWRE4

Texas Instruments IC FF D-TYPE SNGL 8BIT 20TSSOP / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width)
RoHS : Compliant
820 : $0.4113
655 : $0.428
505 : $0.4448
355 : $0.4781
230 : $0.4948
110 : $0.5283
10,900
74LVC574APW

Nexperia Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger 3-State
RoHS : Compliant
152 : $1.9848
113 : $2.2138
88 : $2.2901
64 : $2.3665
41 : $2.4428
17 : $2.9771
4,562
MC74HC574ADWR2G

onsemi IC D-TYPE POS TRG SNGL 20SOIC
RoHS : Compliant
970 : $0.3101
725 : $0.3459
560 : $0.3578
410 : $0.3697
265 : $0.3817
110 : $0.4652
2,327
SPC5748GHK0AMMJ6

Nexperia IC MCU 32BIT 6MB FLSH 256MAPPBGA
7 : $48.6821
6 : $50.6611
5 : $52.64
3 : $56.598
2 : $58.5769
1 : $62.5348
388

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com