| Electronic Components Datasheet Search |
|
C577 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Verical | C5775.27.01 | Prysmian Spa | C5775.27.01 |
| 4 | |
| C5775.41.01 | Prysmian Spa | C5775.41.01 |
| 2 | ||
![]() Avnet Americas | SPC5775EDK3MME3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5775EDK3MME3R) RoHS : Compliant |
| 3,000 | |
| SPC5777CCK3MME3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CCK3MME3R) RoHS : Compliant |
| 500 | ||
| SPC5775EDK3MME3 | NXP Semiconductors | 32-bit MCU, PowerPC e200Z7, 264 MHz, 4 MB, 512 KB, 416 Pins, MAPBGA - Trays (Alt: SPC5775EDK3MME3) RoHS : Compliant |
| 350 | ||
| SPC5777CDK3MMO4 | NXP Semiconductors | - Trays (Alt: SPC5777CDK3MMO4) RoHS : Compliant |
| 100 | ||
| SPC5777CDK3MMO3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CDK3MMO3R) RoHS : Compliant |
| 0 | ||
| SPC5777CCK3MMO3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CCK3MMO3R) RoHS : Compliant |
| 0 | ||
| MPC5775BE-416DS | NXP Semiconductors | - Boxed Product (Development Kits) (Alt: MPC5775BE-416DS) RoHS : Not Compliant |
| 0 | ||
| RN60C5772DRE7 | Vishay Intertechnologies | - Tape and Reel (Alt: RN60C5772DRE7) RoHS : Not Compliant |
| 0 | ||
| SPC5777CK3MME3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CK3MME3R) RoHS : Compliant |
| 0 | ||
| SPC5777CLK3MMO3R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CLK3MMO3R) RoHS : Compliant |
| 0 | ||
| SPC5777CSK3MME4 | NXP Semiconductors | - Trays (Alt: SPC5777CSK3MME4) RoHS : Compliant |
| 0 | ||
| SPC5777CLK3MME3 | NXP Semiconductors | - Trays (Alt: SPC5777CLK3MME3) RoHS : Compliant |
| 0 | ||
| SPC5777CSK3MME4R | NXP Semiconductors | - Tape and Reel (Alt: SPC5777CSK3MME4R) RoHS : Compliant |
| 0 | ||
| SPC5777CCK3MMO3 | NXP Semiconductors | - Trays (Alt: SPC5777CCK3MMO3) RoHS : Compliant |
| 0 | ||
| SPC5777CSK3MME3 | NXP Semiconductors | - Trays (Alt: SPC5777CSK3MME3) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | SPC5775BDK3MME2 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, 4MB Flash RoHS : Compliant |
| 329 | |
| SPC5777CCK3MMO3 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 264MHz, -40/+125degC, Automotive Grade, 516 MAP RoHS : Compliant |
| 303 | ||
| SPC5777CDK3MMO4 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 300 MHz, -40/+125degC, Automotive Grade, 516 MAP RoHS : Compliant |
| 239 | ||
| SPC5777CK3MMO3 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 264MHz, -40/+125degC, Automotive Grade, 516 MAP RoHS : Compliant |
| 212 | ||
| SPC5777CDK3MME3 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 264 MHz, -40/+125degC, Automotive Grade, 416 MAP RoHS : Compliant |
| 183 | ||
| SPC5777CDK3MMO3 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 264 MHz, -40/+125degC, Automotive Grade, 516 MAP RoHS : Compliant |
| 173 | ||
| 6FC57-73/TABS | Carling Technologies | Toggle Switches 1-pole, ON - OFF - (ON), 10A/15A 250VAC/125VAC 3/4 HP, Non-Illuminated Bat Style Toggle Switch with .250 Tab (Q.C.) RoHS : Compliant |
| 160 | ||
| SPC5775EDK3MME3 | NXP Semiconductors | 32-bit Microcontrollers - MCU Power Arch cores, 8MB Flash, 264MHz RoHS : Compliant |
| 103 | ||
| 6FC57-78/TABS | Carling Technologies | Toggle Switches 1-pole, ON - OFF - (ON), 10A/15A 250VAC/125VAC 3/4 HP, Non-Illuminated, Sealed Bat Style Toggle Switch with .250 Tab (Q.C.) RoHS : Compliant |
| 97 | ||
| 6FC57-78 | Carling Technologies | Toggle Switches 6FC57-78 RoHS : Compliant |
| 91 | ||
| SPC5777CDK3MME4 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 300 MHz, -40/+125degC, Automotive Grade, 416 MAP RoHS : Compliant |
| 55 | ||
| SPC5777CAK3MMO3 | NXP Semiconductors | 32-bit Microcontrollers - MCU NXP 32-bit MCU, Power Arch cores, 8MB Flash, 264MHz, -40/+125degC, Automotive Grade, 516 MAP RoHS : Compliant |
| 34 | ||
| NAE-CW308T-MPC5777C | NewAE Technology Inc | Daughter Cards & OEM Boards MPC5777C Automotive SHE Target for CW308 RoHS : Compliant |
| 4 | ||
| MPC5777M-512DS | NXP Semiconductors | Daughter Cards & OEM Boards MPC5775C MAPBGA 512 daughtercard for Engine Management RoHS : Compliant |
| 3 | ||
| PE3C5770-6 | Pasternack Enterprises | RF Cable Assemblies 2.4mm Male to 2.4mm Male Cable 6 Inch Length Using PE-SR405FLJ Coax |
| 1 | ||
![]() Newark | SPC5777CCK3MME3 | NXP Semiconductors | Mcu, Aec-Q100, 32Bit, 264Mhz, Mapbga-416; |NXP Semiconductors SPC5777CCK3MME3 RoHS : Compliant |
| 193 | |
| SPC5775EDK3MME3 | NXP Semiconductors | Mcu, 32Bit, 264Mhz, Mapbga-416; |NXP Semiconductors SPC5775EDK3MME3 RoHS : Compliant |
| 174 | ||
| SPC5775BDK3MME2 | NXP Semiconductors | Mcu, 32Bit, 220Mhz, Mapbga-416; |NXP Semiconductors SPC5775BDK3MME2 RoHS : Compliant |
| 174 | ||
| SPC5777CDK3MMO3 | NXP Semiconductors | Mcu, 32Bit, 264Mhz, Mapbga-516; |NXP Semiconductors SPC5777CDK3MMO3 RoHS : Compliant |
| 68 | ||
| HMC577LC4B | Analog Devices Inc | Frequency Mult, 27 To 31Ghz, Qfn-Ep-24; |Analog Devices, Inc. HMC577LC4B RoHS : Compliant |
| 11 | ||
| MPC5775E-EVB | NXP Semiconductors | Dev Board, Battery Cell Controller; |NXP Semiconductors MPC5775E-EVB RoHS : Compliant |
| 8 | ||
| WKC 577-5M | TURCK Inc | Neu; |Turck WKC 577-5M RoHS : Not Compliant |
| 0 | ||
| RKC 577-3M | TURCK Inc | Neu; |Turck RKC 577-3M RoHS : Not Compliant |
| 0 | ||
| WSC 577-6M | TURCK Inc | Neu; |Turck WSC 577-6M RoHS : Not Compliant |
| 0 | ||
| RKM RSC 577-3M | TURCK Inc | Nhb; |Turck RKM RSC 577-3M RoHS : Not Compliant |
| 0 | ||
| SPC5777CDK3MMO3R | NXP Semiconductors | Nxp 32-Bit Mcu, Power Arch Cores, 8Mb Fl; |NXP Semiconductors SPC5777CDK3MMO3R RoHS : Compliant |
| 0 | ||
| SPC5777CCK3MMO3R | NXP Semiconductors | Nxp 32-Bit Mcu, Power Arch Cores, 8Mb Fl; |NXP Semiconductors SPC5777CCK3MMO3R RoHS : Compliant |
| 0 | ||
| RSM RKC 577-0.5M | TURCK Inc | Nhb; |Turck RSM RKC 577-0.5M RoHS : Not Compliant |
| 0 | ||
| WSC WKC 577-0.3M | TURCK Inc | Neu; |Turck WSC WKC 577-0.3M RoHS : Not Compliant |
| 0 | ||
| RKC RKC 577-24 IN | TURCK Inc | Neu; |Turck RKC RKC 577-24 IN RoHS : Not Compliant |
| 0 | ||
![]() RS | 6FC57-73/TABS (FMO-30410000 | 6FC57-73/TABS | 6FC57-73/TABS) | Carling Technologies | TOGGLE SWITCH, SPDT, ROUND ACTUATOR, NON-ILLUMINATED, 15A, 125VAC, TABS |
| 951 | |
| 6FC57-78/TABS (FMO-30413000|6FC57-78/TABS|6FC57-78/TABS) | Carling Technologies | TOGGLE SWITCH, SPDT, ROUND ACTUATOR, SEALED, NON-ILLUM, 15A, 125VAC, TABS |
| 318 | ||
| 6FC57-73 (FMO-30402000 | 6FC57-73 | 6FC57-73) | Carling Technologies | SWITCH;TOGGLE;SP;GENERAL PURPOSE;F SERIES |
| 10 | ||
| RSC RKC 577-4M (U0335-314) | TURCK Inc | M12 4M FEMALE, MALE CORDSET |
| 4 | ||
| WSC WKC 577-2.9M/CS10513 (U-53691) | TURCK Inc | CORDSET |
| 2 | ||
| RSC RKC 577-1M (U0335-291) | TURCK Inc | DOUBLE ENDED IN-SERIES, CORDSET, M12 MALE, STRAIGHT TO M12 FEMALE, EUROFAST SERIES |
| 1 | ||
| RSC RSC 577-1M (U7495-1) | TURCK Inc | CORDSET, M12, MALE STRAIGHT TO MALE STRAIGHT, 5 WIRE, 1 METER, PVC, GRAY, U7495-1 |
| 0 | ||
| RSC 577-1.5M (U0319-115) | TURCK Inc | CORDSET, RSC 577-1.5M, U0319-115 |
| 0 | ||
| RSC RKC 577-15M (U0335-30) | TURCK Inc | CORDSET, RSC RKC 577-15M, U0335-30 |
| 0 | ||
| RSC RKC 577-10M (U0335-310) | TURCK Inc | CORDSET, M12 FEM TO M12 MALE STR, 10M, 4A, DEVICENET, GRAY TPU, EUROFAST SERIES |
| 0 | ||
| RSC RKC 577-0.3M (U0335-35) | TURCK Inc | CORDSET, RSC RKC 577-0.3M, U0335-35 |
| 0 | ||
| 6FC57-78 (FMO-00000368 | 6FC57-78 | 6FC57-78) | Carling Technologies | SWITCH;TOGGLE;SP;GENERAL PURPOSE;F SERIES |
| 0 | ||
| 6FC57-73/POLY (FMO-30403100 | 6FC57-73/POLY | 6FC5773/POLY) | Carling Technologies | SWITCH;TOGGLE;SP;GENERAL PURPOSE;F SERIES |
| 0 | ||
| 6FC57-73/HDW ASSM (FMO-30403000 | 6FC57-73/HDW ASSM | 6FC5773/HDW ASSM) | Carling Technologies | SWITCH;TOGGLE;SP;GENERAL PURPOSE;F SERIES |
| 0 | ||
| 6FC57-73/.187 TABS (FMO-00110945 | 6FC57-73/.187 TABS | 6FC5773.187 TABS) | Carling Technologies | SWITCH;TOGGLE;SP;GENERAL PURPOSE;F SERIES |
| 0 | ||
![]() Bisco Industries | C5774.41.01 | General Cable Technologies Corporation | 3,000 | |||
| C5775.30.01 | General Cable Technologies Corporation | 2,000 | ||||
| C5775.18.02 | General Cable Technologies Corporation | 1,000 | ||||
| C5775.41.01 | General Cable Technologies Corporation | 1,000 | ||||
| C5775.38.01 | General Cable Technologies Corporation | 1,000 | ||||
![]() Onlinecomponents.com | C5775.27.01 | Carol Cable | RoHS : Compliant |
| 4 | |
| C5775.41.01 | Carol Cable | RoHS : Compliant |
| 2 | ||
| C5770.41.01 | Carol Cable |
| 0 | |||
| C5775.38.01 | Carol Cable | RoHS : Compliant |
| 0 | ||
| C5775.27.02 | Carol Cable | RoHS : Compliant |
| 0 | ||
| C5777.41.01 | Carol Cable |
| 0 | |||
| C5775.38.02 | Carol Cable | Coaxial Cable, RG6/U, 18AWG, BCCS, Solid, Foil/Braid Shld, Flexfoil Bonded + A, FPE Ins |
| 0 | ||
| C5775.31.02 | Carol Cable | RoHS : Compliant |
| 0 | ||
| C5775.46.01 | Carol Cable |
| 0 | |||
| C5775.41.02 | Carol Cable | RoHS : Compliant |
| 0 | ||
| C5775.31.01 | Carol Cable | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | SPC5775EDK3MME3 | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 4MB (4M x 8) 264MHz 416-BGA Tray RoHS : Compliant |
| 755 | |
| SPC5775BDK3MME2 | NXP Semiconductors | IC MCU ColdFire V1 32Bit 1 Core FLASH 256kB (256k x 8) 50MHz 100-QFP Tray RoHS : Compliant |
| 10,000 | ||
| SPC5777CSK3MMO3 | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 8MB (8M x 8) 264MHz 516-BGA Tray RoHS : Compliant |
| 7,400 | ||
| SPC5775EDK3MME3R | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 4MB (4M x 8) 264MHz 416-BGA T/R RoHS : Compliant |
| 850 | ||
| SPC5777CDK3MME3 | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 8MB (8M x 8) 264MHz 416-BGA Tray RoHS : Compliant |
| 323 | ||
| SPC5775BSK3MME2R | NXP Semiconductors | MPC5775B - NXP 32-bit MCU, 4MB Fla RoHS : Compliant |
| 500 | ||
| SPC5775BSK3MME2 | NXP Semiconductors | MPC5775B - NXP 32-bit MCU, 4MB Fla RoHS : Compliant |
| 200 | ||
| SPC5777CDK3MME4 | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 8MB (8M x 8) 306MHz 416-BGA Tray RoHS : Compliant |
| 5 | ||
| SPC5777CKMME3 | NXP Semiconductors | IC MCU e200z7 32Bit 3 Core FLASH 8MB (8M x 8) 264MHz 416-BGA Tray RoHS : Compliant |
| 5 | ||
2SC5775![]() | onsemi | Trans BJTs Single 160V 12A TO-3P-3 RoHS : Compliant |
| 430 | ||
| HMC577LC4BTR | Analog Devices Inc | RF - Other Frequency Multiplier VSAT, DBS 24-QFN T/R RoHS : Compliant |
| 1,690 | ||
| SPC5777CK2MMO3 | Freescale Semiconductor | IC MCU e200z7 32Bit 3 Core FLASH 8MB (8M x 8) 264MHz 516-BGA Tray RoHS : Compliant |
| 31 | ||
| HMC577LC4BTR | Hittite Microwave Corp | RF - Other Frequency Multiplier VSAT, DBS 24-QFN T/R RoHS : Compliant |
| 1,797 | ||
2SC5772FR-TL-E![]() | Renesas Electronics Corporation | RF BJT Single 9V 75mA SOT-23-3 RoHS : Compliant |
| 171,000 | ||
2SC5773JR-TL-E![]() | Renesas Electronics Corporation | RF BJT Single 6V 80mA SOT-23-3 RoHS : Compliant |
| 1,400 | ||
![]() Sager | 6FC57-73/HDWASSM | Carling Technologies | Toggle Switches |
| 0 | |
| 6FC5773.187TABS | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-72 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-73XMC1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-78-XSCH1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-73/TABS-XNK1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-78/TABS-XKH1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-73-XRC1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-73/POLY | Carling Technologies | Toggle Switches 6FC5773/POLY |
| 0 | ||
| 6FC57-73/TABS | Carling Technologies | Toggle Switches 1-pole, ON - OFF - (ON), 10A/15A 250VAC/125VAC 3/4 HP, Non-Illuminated Bat Style Toggle Switch with .250 Tab (Q.C.) RoHS : Compliant |
| 0 | ||
| 6FC57-73/TABS-XCM1 | Carling Technologies | Toggle Switches | 0 | |||
| 6FC57-78/TABS | Carling Technologies | Toggle Switches 1-pole, ON - OFF - (ON), 10A/15A 250VAC/125VAC 3/4 HP, Non-Illuminated, Sealed Bat Style Toggle Switch with .250 Tab (Q.C.) RoHS : Compliant |
| 0 | ||
| 6FC57-73/.187TABS | Carling Technologies | Toggle Switches |
| 0 | ||
| AAC5771-00 | TE Connectivity | TE Connectivity 100P2315-6B-50-10E-L50-CHP | 0 | |||
| 6FC57-78/TABS-XLT1 | Carling Technologies | Toggle Switches | 0 | |||
![]() TME | SPC5777CDK3MMO4 | NXP Semiconductors | SPC5777CDK3MMO4 RoHS : Compliant |
| 1,408 | |
| SPC5777CDK3MMO3 | NXP Semiconductors | SPC5777CDK3MMO3 RoHS : Compliant |
| 480 | ||
| LC 57/700-1050/54 FLEXC LP SNC4 | Tridonic Gmbh & Co Kg | Power supply: switching; LED; 57W; 20÷54VDC; 700÷1050mA; IP20; LC |
| 366 | ||
| SPC5775BDK3MME2 | NXP Semiconductors | IC: ARM microcontroller; 220MHz; Features: DMA,PoR; -40÷125°C RoHS : Compliant |
| 160 | ||
| SPC5777CK3MMO3 | NXP Semiconductors | SMD; Interface: SPI RoHS : Compliant |
| 150 | ||
| SPC5777CLK3MMO3 | NXP Semiconductors | SPC5777CLK3MMO3 RoHS : Compliant |
| 102 | ||
![]() ComSIT USA | 2SC5773JRTLE | Renesas Electronics Corporation | SILICON NPN EPITAXIAL UHF/VHF WIDE BAND AMPLIFIER RF Small Signal Bipolar Transistor, 0.08A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN RoHS : Compliant | 12,000 | ||
| C57744000 | TE Connectivity | POLYSWITCH RESETTABLE DEVICE PTC Resettable Fuse, Through Hole Mount RoHS : Compliant | 7,500 | |||
| VT82C577M | VIA Technologies Inc | Electronic Component RoHS : Not Compliant | 1,592 | |||
![]() Interstate Connecting Components | C57739-000 | TE Connectivity | EKM-2020-2D1-EB | 0 | ||
| AGC577N00001200000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL | 0 | |||
| AGC577N00001215000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABL | 0 | |||
![]() Richardson RFPD | 115223-HMC577LC4B | Analog Devices Inc | HMC577LC4B RF Multiplier Evaluation Board RoHS : Compliant |
| 0 | |
| HMC577LC4B | Analog Devices Inc | Active RF Multipliers x2 27GHz to 31GHz-OUT 24-Pin RoHS : Compliant |
| 0 | ||
![]() Avnet Abacus | AAC5779-00 | TE Connectivity | (Alt: AAC5779-00) | 0 | ||
![]() Avnet Silica | SPC5777CDK3MMO4 | NXP Semiconductors | Microcontroller Application Specific MPC5xxx MPC57xx Series 32bit 8MB 300MHz MAPBGA516 (Alt: SPC5777CDK3MMO4) RoHS : Compliant | 160 | ||
| SPC5777CLK3MMO3 | NXP Semiconductors | 32bit MCU PowerPC e200Z7 264 MHz 8 MB 512 KB 516 Pins MAPBGA (Alt: SPC5777CLK3MMO3) RoHS : Compliant | 160 | |||
| SPC5775BDK3MME2 | NXP Semiconductors | Microcontroller Application Specific MPC5xx Family MPC57xx Series 32bit 512KB 220Mhz MAPBGA416 (Alt: SPC5775BDK3MME2) RoHS : Compliant | 160 | |||
| SPC5777CK3MMO3 | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC57xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5777CK3MMO3) RoHS : Compliant | 80 | |||
| SPC5775EDK3MME3 | NXP Semiconductors | 32bit MCU PowerPC e200Z7 264 MHz 4 MB 512 KB 416 Pins MAPBGA (Alt: SPC5775EDK3MME3) RoHS : Compliant | 80 | |||
| SPC5777MK0MVU8 | NXP Semiconductors | 32 Bit Microcontroller Quad Core MPC5 Family MPC57xx Series Microcontrollers Power Architecture (Alt: SPC5777MK0MVU8) RoHS : Compliant | 0 | |||
| MPC5775BE-416DS | NXP Semiconductors | Development Board Accessory MPC5775BE MCU Adapter Board MAPBGA416 Socket (Alt: MPC5775BE-416DS) RoHS : Compliant | 0 | |||
| SPC5777CK3MME3R | NXP Semiconductors | NXP 32BIT MCU POWER ARCH CORES 8MB FLASH 264MHZ 40125DEGC AUTOMOTIVE GRADE 416 MAP (Alt: SPC5777CK3MME3R) RoHS : Compliant | 0 | |||
| SPC5777CCK3MMO3 | NXP Semiconductors | MCU 32Bit SPC57 Z7 CISC 8MB Flash 33V5V 516Pin MAPBGA (Alt: SPC5777CCK3MMO3) RoHS : Compliant | 0 | |||
| SPC5777CTK3MME3 | NXP Semiconductors | (Alt: SPC5777CTK3MME3) RoHS : Compliant | 0 | |||
| SPC5777CDK3MMO3R | NXP Semiconductors | 32Bit Microcontroller MPC577xx e200z7 RISC 8MB Flash 33V5V 516Pin MAPBGA TR (Alt: SPC5777CDK3MMO3R) RoHS : Compliant | 0 | |||
| SPC5777CCK3MMO3R | NXP Semiconductors | MCU 32Bit SPC57 e200z7 RISC 8MB Flash 129V 516Pin MAPBGA TR (Alt: SPC5777CCK3MMO3R) RoHS : Compliant | 0 | |||
| SPC5777CLK3MMO3R | NXP Semiconductors | 32bit MCU PowerPC e200Z7 264 MHz 8 MB 512 KB 516 Pins MAPBGA (Alt: SPC5777CLK3MMO3R) RoHS : Compliant | 0 | |||
| PPC5777M2K0MVA8B | NXP Semiconductors | MCU 32Bit MPC5777M e200z7 RISC 8640KB Flash 3V to 55V 512Pin FBGA (Alt: PPC5777M2K0MVA8B) RoHS : Compliant | 0 | |||
| SPC5777CSK3MME4R | NXP Semiconductors | Microcontroller 32 Bit Power Arch Core 8Mbyte Flash 264MHz 416 Pin MAP Automotive (Alt: SPC5777CSK3MME4R) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | SPC5777CDK3MMO4 | NXP Semiconductors | Microcontroller Application Specific MPC5xxx MPC57xx Series 32bit 8MB 300MHz MAPBGA516 (Alt: SPC5777CDK3MMO4) RoHS : Compliant | 2,400 | ||
| SPC5777CK3MME3R | NXP Semiconductors | NXP 32BIT MCU POWER ARCH CORES 8MB FLASH 264MHZ 40125DEGC AUTOMOTIVE GRADE 416 MAP (Alt: SPC5777CK3MME3R) RoHS : Compliant | 500 | |||
| SPC5777MK0MVA8 | NXP Semiconductors | 32 Bit Microcontroller Quad Core MPC5 Family MPC57xx Series Microcontrollers Power Architecture (Alt: SPC5777MK0MVA8) RoHS : Compliant | 176 | |||
| SPC5777CK3MMO3 | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC57xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5777CK3MMO3) RoHS : Compliant | 120 | |||
| SPC5777CDK3MMO3 | NXP Semiconductors | MCU 32Bit MPC5777C e200z7 RISC 8MB Flash 12V to 132V 516Pin MAPBGA Tray (Alt: SPC5777CDK3MMO3) RoHS : Compliant | 80 | |||
| SPC5777MK0MVU8 | NXP Semiconductors | 32 Bit Microcontroller Quad Core MPC5 Family MPC57xx Series Microcontrollers Power Architecture (Alt: SPC5777MK0MVU8) RoHS : Compliant | 0 | |||
| PPC5777CK2MMO3 | NXP Semiconductors | HighEnd MCU (Alt: PPC5777CK2MMO3) RoHS : Compliant | 0 | |||
| SPC5777CK3MME3 | NXP Semiconductors | Microcontroller Application Specific MPC5xxx MPC57xx Series 32bit 8MB 264MHz MAPBGA416 (Alt: SPC5777CK3MME3) RoHS : Compliant | 0 | |||
| SPC5775EDK3MME3 | NXP Semiconductors | 32bit MCU PowerPC e200Z7 264 MHz 4 MB 512 KB 416 Pins MAPBGA (Alt: SPC5775EDK3MME3) RoHS : Compliant | 0 | |||
| SPC5777CCK3MMO3 | NXP Semiconductors | MCU 32Bit SPC57 Z7 CISC 8MB Flash 33V5V 516Pin MAPBGA (Alt: SPC5777CCK3MMO3) RoHS : Compliant | 0 | |||
| SPC5777CK3MMO3R | NXP Semiconductors | NXP 32bit MCU Power Arch cores 8MB Flash 264MHz 40125degC Automotive Grade 516 MAP (Alt: SPC5777CK3MMO3R) RoHS : Compliant | 0 | |||
| SPC5777CSK3MMO4 | NXP Semiconductors | MCU 32Bit MPC5777C RISC 8MB Flash 45V to 55V 516Pin MAPBGA Tray (Alt: SPC5777CSK3MMO4) RoHS : Compliant | 0 | |||
| SPC5777CDK3MMO3R | NXP Semiconductors | 32Bit Microcontroller MPC577xx e200z7 RISC 8MB Flash 33V5V 516Pin MAPBGA TR (Alt: SPC5777CDK3MMO3R) RoHS : Compliant | 0 | |||
| SPC5777CCK3MMO3R | NXP Semiconductors | MCU 32Bit SPC57 e200z7 RISC 8MB Flash 129V 516Pin MAPBGA TR (Alt: SPC5777CCK3MMO3R) RoHS : Compliant | 0 | |||
| SPC5777CLK3MMO3R | NXP Semiconductors | 32bit MCU PowerPC e200Z7 264 MHz 8 MB 512 KB 516 Pins MAPBGA (Alt: SPC5777CLK3MMO3R) RoHS : Compliant | 0 | |||
![]() Flip Electronics | SPC5777CDK3MME3 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 583 | |
| SPC5777CDK3MMO3R | NXP Semiconductors | Stock RoHS : Compliant | 531 | |||
| SPC5777CDK3MME4R | NXP Semiconductors | Stock RoHS : Compliant | 500 | |||
| SPC5777CAK3MMO3 | NXP Semiconductors | Stock RoHS : Compliant | 475 | |||
| SPC5775BDK3MME2 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 308 | ||
| SPC5775BDK3MME2R | NXP Semiconductors | Stock RoHS : Compliant | 308 | |||
| SPC5777CK2MME3 | NXP Semiconductors | Stock, Ship Today |
| 32 | ||
| MPC5775E-EVB | NXP Semiconductors | Stock | 29 | |||
| MPC5775BE-416DS | NXP Semiconductors | Stock RoHS : Compliant | 20 | |||
| MPC5777C-416DS | NXP Semiconductors | Stock | 11 | |||
| MPC5777M-512DS | NXP Semiconductors | Stock | 8 | |||
| MPC5775B-EVB | NXP Semiconductors | Stock | 8 | |||
| MPC5777M-416DS | NXP Semiconductors | Stock | 8 | |||
![]() Master Electronics | 6FC57-73/TABS | Carling Technologies | Switch Toggle ON OFF (ON) SPDT Bat Lever Quick Conn 15A 250VAC 559.27VA Panel Mount with Threads RoHS : Compliant |
| 380 | |
| 6FC57-78 | Carling Technologies | Switch Toggle ON OFF (ON) SPDT Bat Lever Solder Lug 15A 250VAC 559.27VA Panel Mount with Threads RoHS : Compliant |
| 210 | ||
| 6FC57-78/TABS | Carling Technologies | Switch Toggle ON OFF (ON) SPDT Bat Lever Quick Conn 15A 250VAC 559.27VA Panel Mount with Threads RoHS : Compliant |
| 11 | ||
| 6FC57-73/.187-TABS | Carling Technologies | Switch; Toggle; SP; General Purpose; F Series | Carling Technologies 6FC57-73/.187 TABS RoHS : Compliant |
| 7 | ||
| C5775.27.01 | Carol Cable | RoHS : Compliant |
| 4 | ||
| 6FC57-78/TABS-XCH1 | Carling Technologies | Switch Toggle ON OFF ON SPDT Bat Lever Quick Conn 15A 250VAC 559.27VA Panel Mount with Threads RoHS : Compliant |
| 3 | ||
| C5775.41.01 | Carol Cable | RoHS : Compliant |
| 2 | ||
| 6FC57-73/POLY | Carling Technologies | F-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| 6FC57-73/HDW-ASSM | Carling Technologies | F-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| 6FC57-73 | Carling Technologies | F-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C5770LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax with heatshrink, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770LF/HS can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770LF/HS is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax with heatshrink, LF solder. | 100 | ||
| PE3C5770 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax. | 80 | |||
| PE3C5770LF/HS-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.4mm Male to 2.4mm Male Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 9 inch length using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 9 inch length using PE-SR405FLJ coax with heatshrink, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770LF/HS-9 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770LF/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 9 inch length using PE-SR405FLJ coax with heatshrink, LF solder. |
| 20 | ||
| PE3C5770-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405FLJ coax. |
| 20 | ||
| PE3C5770-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-SR405FLJ coax. |
| 20 | ||
| PE3C5770-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770-18 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax. |
| 20 | ||
| PE3C5776 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm MCX Plug to 75 Ohm Push-On MCX Plug Right Angle Cable Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm MCX plug to 75 Ohm push-on MCX plug right angle cable using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm MCX plug to 75 Ohm push-on MCX plug right angle cable using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3C5776, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3C5776 is built with RG187 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5776 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm MCX plug to 75 Ohm push-on MCX plug right angle cable using 75 Ohm RG187 coax. | 0 | |||
| PE3C5772 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 50 Ohm SMA Male to 75 Ohm BNC Male Right Angle Cable Using 75 Ohm RG187 Coax., Radio frequency assembly 50 Ohm SMA male to 75 Ohm BNC male right angle cable using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 50 Ohm SMA male to 75 Ohm BNC male right angle cable using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle BNC cable connection on the other. Our SMA to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C5772, can also be known as a SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C5772 is built with RG187 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency SMA male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5772 can also be used in the other direction and will be right angle BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 50 Ohm SMA male to 75 Ohm BNC male right angle cable using 75 Ohm RG187 coax. | 0 | |||
| PE3C5774-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. MCX Jack Bulkhead to SMA Female Bulkhead Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly MCX jack bulkhead to SMA female bulkhead cable 72 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack bulkhead to SMA female bulkhead cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MCX bulkhead cable connection on one end and a SMA bulkhead cable connection on the other. Our MCX to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3C5774-72 can also be known as a MCX female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3C5774-72 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. MCX female to SMA jack cable assembly PE3C5774-72 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5774-72 can also be used in the other direction and will be a SMA female bulkhead to MCX jack bulkhead cable assembly if the opposite connectivity is required. MCX female bulkhead to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5773 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-600 Coax., Radio frequency assembly N male to N female bulkhead cable using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C5773, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C5773 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5773 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable using LMR-600 coax. | 0 | |||
| PE3C5774-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack Bulkhead to SMA Female Bulkhead Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly MCX jack bulkhead to SMA female bulkhead cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack bulkhead to SMA female bulkhead cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MCX bulkhead cable connection on one end and a SMA bulkhead cable connection on the other. Our MCX to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3C5774-48 can also be known as a MCX female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3C5774-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. MCX female to SMA jack cable assembly PE3C5774-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5774-48 can also be used in the other direction and will be a SMA female bulkhead to MCX jack bulkhead cable assembly if the opposite connectivity is required. MCX female bulkhead to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5779 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm TNC Male to Straight Cut Lead Cable Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm TNC male to straight cut lead cable using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm TNC male to straight cut lead cable using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and straight cut lead cable connection on the other. Our TNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This TNC to straight cut lead cable is a male to sexless coax assembly, PE3C5779, can also be known as a TNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. TNC plug to straight cut lead sexless cable assembly PE3C5779 is built with RG187 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to straight cut lead cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this TNC male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5779 can also be used in the other direction and will be straight cut lead sexless to TNC male cable assembly if the opposite connectivity is required. TNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to straight cut lead cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to straight cut lead cable using 75 Ohm RG187 coax. | 0 | |||
| PE3C5770/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405FLJ Coax with HeatShrink. PE3C5770/HS is a 2.4mm male to 2.4mm male cable using PE-SR405FLJ coax. This Pasternack 2.4mm male to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male 2.4mm to male 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C5770/HS 2.4mm male to 2.4mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C5778 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male to Curry FAKRA Jack Cable Using LMR-100 Coax., Radio frequency assembly BNC male to curry FAKRA jack cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to curry FAKRA jack cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and FAKRA cable connection on the other. Our BNC to FAKRA cable assemblies have a male gender on end 1 and jack on end 2. This BNC to FAKRA cable is a male to jack coax assembly, PE3C5778, can also be known as a BNC plug to FAKRA female cable assembly and will be shipped same-day as it is purchased. BNC plug to FAKRA female cable assembly PE3C5778 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5778 can also be used in the other direction and will be FAKRA jack to BNC male cable assembly if the opposite connectivity is required. BNC plug to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to FAKRA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to curry FAKRA jack cable using LMR-100 coax. | 0 | |||
| PE3C5770-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.4mm Male to 2.4mm Male Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770-6 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 6 inch length using PE-SR405FLJ coax. |
| 0 | ||
![]() Vyrian | SPC5777CK3MME3R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA416 RoHS : Compliant | 12,656 | ||
| MPC5775BE-416DS | NXP Semiconductors | Development kits/Accessories RoHS : Compliant | 12,636 | |||
| SPC5777CDK3MMO3R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA516 RoHS : Compliant | 12,424 | |||
| SPC5777CSK3MME3 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA416 RoHS : Compliant | 11,625 | |||
| SPC5777CLK3MME3 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA416 RoHS : Compliant | 11,586 | |||
| 115223-HMC577LC4B | Analog Devices Inc | RoHS : Compliant | 11,417 | |||
| SPC5777CDK3MMO4 | NXP Semiconductors | RISC Microcontroller, 32-Bit, 264MHz RoHS : Compliant | 11,032 | |||
| SPC5777CCK3MMO3R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA516 RoHS : Compliant | 10,802 | |||
| SPC5777MK0MVU8 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 300MHz, CMOS, PBGA416 RoHS : Compliant | 8,888 | |||
| LDC577BIM3-NOPB | Texas Instruments | 8,096 | ||||
| TMC57703CAT2 | Texas Instruments | 6,959 | ||||
| SPC5777CCK3MMO3 | NXP Semiconductors | Microcontroller, 32-Bit, FLASH, E200Z7 CPU, 264MHz, CMOS, PBGA516 RoHS : Compliant | 6,709 | |||
| SPC5777CLK3MMO3R | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 264MHz, CMOS, PBGA516 RoHS : Compliant | 6,566 | |||
| TMC57703TB12 | Texas Instruments | 6,037 | ||||
TMC57750PM![]() | Texas Instruments | Consumer Circuit, PQFP64 | 4,443 | |||
![]() Win Source Electronics | SPC5775BDK3MME2 | Nexperia | IC MCU 32BIT 4MB FLASH 416MAPBGA / e200z7 series Microcontroller IC 32-Bit Dual-Core 220MHz 4MB (4M x 8) FLASH 416-MAPBGA (27x27) |
| 1,000 | |
| SPC5775BDK3MME2R | Nexperia |
| 1,000 | |||
| SPC5777CCK3MME3 | Nexperia | IC MCU 32BIT 8MB FLASH 416MAPBGA |
| 435 | ||
| SPC5777CCK3MME3R | Nexperia | IC MCU 32BIT 8MB FLASH 416MAPBGA / e200z7 series Microcontroller IC 32-Bit Tri-Core 264MHz 8MB (8M x 8) FLASH 416-MAPBGA (27x27) |
| 400 | ||
| SPC5777CDK3MMO3 | Nexperia | IC MCU 32BIT 8MB FLASH 516MAPBGA / e200z7 MPC57xx Microcontroller IC 32-Bit Tri-Core 264MHz 8MB (8M x 8) FLASH 516-MAPBGA (27x27) |
| 210 | ||
| SPC5777CDK3MMO3R | Nexperia | IC MCU 32BIT 8MB FLASH 516MAPBGA / e200z7 series Microcontroller IC 32-Bit Tri-Core 264MHz 8MB (8M x 8) FLASH 516-MAPBGA (27x27) |
| 180 | ||
| HMC577LC4B | Analog Devices Inc | IC MULTIPLIER X2 BB 24SMD RoHS : Compliant |
| 81 | ||
| HMC577LC4BTR | Analog Devices Inc | IC MMIC MULTIPLIER X2 BB 24SMD RoHS : Compliant |
| 70 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |