| Electronic Components Datasheet Search |
|
C831L-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | MPC8315EVRAFDA | Rochester Electronics LLC | IC MPU MPC83XX 333MHZ 620HBGA |
| 3,824 | |
| MPC8313ZQADDB | Rochester Electronics LLC | IC MPU MPC83XX 267MHZ 516TEPBGA |
| 2,760 | ||
DAC8311IDCKR![]() | Texas Instruments | IC DAC 14BIT SC-70-6 RoHS : Compliant |
| 1,822 | ||
DAC8311IDCKR![]() | Texas Instruments | IC DAC 14BIT SC-70-6 RoHS : Compliant |
| 1,822 | ||
DAC8311IDCKR![]() | Texas Instruments | IC DAC 14BIT SC-70-6 RoHS : Compliant |
| 1,822 | ||
| MPC8315VRAFDA | Rochester Electronics LLC | IC MPU MPC83XX 333MHZ 620HBGA |
| 612 | ||
| MPC8313VRAFFC | NXP Semiconductors | IC MPU MPC83XX 333MHZ 516TEPBGA RoHS : Compliant |
| 355 | ||
| MPC8315EVRAFDA | Rochester Electronics LLC | IC MPU 333MHZ 620TEPBGA |
| 112 | ||
| MPC8313VRAGDC | FLIP ELECTRONICS | IC MPU POWERQUICC II PRO 516PBGA |
| 68 | ||
| MPC8315EVRAGDA | NXP Semiconductors | IC MPU MPC83XX 400MHZ 620HBGA RoHS : Compliant |
| 64 | ||
| MPC8313CZQAFF | Rochester Electronics LLC | IC MPU MPC83XX 333MHZ 516TEPBGA RoHS : Not Compliant |
| 40 | ||
| MPC8314CVRAFDA | Rochester Electronics LLC | IC MPU MPC83XX 333MHZ 620HBGA |
| 36 | ||
| MPC8314EVRAFDA | Rochester Electronics LLC | IC MPU MPC83XX 333MHZ 620HBGA |
| 36 | ||
| JR13WCC-8(31) | Hirose Electric Co Ltd | CONN CABLE CLAMP SZ13 BLACK M16 RoHS : Compliant |
| 19 | ||
| KMPC8314EVRAGDA | Rochester Electronics LLC | IC MPU MPC83XX 400MHZ 620BGA |
| 10 | ||
![]() Avnet Americas | TTDO-10KC8-3-1% | CTS Corporation | Thermistor NTC 10kOhm 1% 2-Pin DO-35 - Bulk (Alt: TTDO-10KC8-3-1%) RoHS : Compliant |
| 500 | |
| MPC8313VRAFFC | NXP Semiconductors | Microprocessor, PowerQUICC II PRO MPC8313E Series, 333 MHz, 950 mV to 1.05 V, BGA-516 - Trays (Alt: MPC8313VRAFFC) RoHS : Compliant |
| 78 | ||
| SIT1602AC-83-18S-30.000000Y | SiTime Corporation | - Tape and Reel (Alt: SIT1602AC-83-18S-30.000000Y) RoHS : Compliant |
| 0 | ||
| MPC8314CVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32-Bit 90nm 50MHz 620-Pin TEBGA II Tray - Trays (Alt: MPC8314CVRAFDA) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18E-28.636300X![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BC-83-18E-28.636300X) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18E-6.000000X![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BC-83-18E-6.000000X) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18E-60.000000T![]() | SiTime Corporation | Silicon Oscillator 60MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18E-60.000000T) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18E-8.192000T![]() | SiTime Corporation | Silicon Oscillator 8.192MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18E-8.192000T) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18N-33.000000Y![]() | SiTime Corporation | Silicon Oscillator 33MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18N-33.000000Y) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18N-65.000000T![]() | SiTime Corporation | Silicon Oscillator 65MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18N-65.000000T) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18S-10.000000Y![]() | SiTime Corporation | Silicon Oscillator 10MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18S-10.000000Y) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18S-26.000000T![]() | SiTime Corporation | Silicon Oscillator 26MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18S-26.000000T) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18S-6.000000X![]() | SiTime Corporation | - Tape and Reel (Alt: SIT1602BC-83-18S-6.000000X) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18S-65.000000Y![]() | SiTime Corporation | Silicon Oscillator 65MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18S-65.000000Y) RoHS : Compliant |
| 0 | ||
SIT1602BC-83-18S-66.666600T![]() | SiTime Corporation | Silicon Oscillator 66.6666MHz 1.8V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-83-18S-66.666600T) RoHS : Compliant |
| 0 | ||
![]() Newark | EVAL-ADUC831QSZ![]() | Analog Devices Inc | EVAL BOARD, 8BIT, 8052; RoHS : Compliant |
| 3 | |
ADUC831BSZ![]() | Analog Devices Inc | 8 BIT MCU, 16MHZ, 34I/O, MQFP-52; RoHS : Compliant |
| 1 | ||
| IC831A | Black Box Corporation | ADAPTER, USB 2.0 B RCPT-DSUB 9POS RCPT; Inter Series Connector A:USB B; Convert From Positions:4Positions; Convert From Gender:Receptacle; Inter Series Connector B:D Sub; Convert To Positions:9Positions; Convert To Gender:Receptacle RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| IC831A-W3 | Black Box Corporation | 3 YEAR WARRANTY FOR IC831A RoHS : Not Compliant | 0 | |||
| MPC8313VRAFFC | NXP Semiconductors | MPU, 32BIT, 333MHZ, BGA-516; RoHS : Compliant |
| 0 | ||
| MPC8313VRAFFC | NXP Semiconductors | MPU, 32BIT, 333MHZ, BGA-516; RoHS : Compliant |
| 0 | ||
| MPC8313VRAFFC | NXP Semiconductors | MPU, POWERQUICC II PRO MPC8313E; RoHS : Compliant |
| 0 | ||
| MPC8315E-RDBA | NXP Semiconductors | REF DESIGN BOARD, PCI EXPRESS, USB2.0; Silicon Manufacturer:NXP; No. of Bits:32bit; Silicon Family Name:PowerQUICC II PRO; Core Architecture:Power Architecture; Core Sub-Architecture:Power Architecture; Silicon Core Number:MPC8315E RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| MPC8313VRADDC | NXP Semiconductors | MCU, 32BIT, POWER, 266MHZ, TEPBGA-II-516; RoHS : Compliant |
| 0 | ||
| LC8313-200-500 | Omega Engineering | LOAD CELL, 2MV/V, 500LB, 15V; RoHS : Compliant |
| 0 | ||
| MPC8315CVRAGDA | NXP Semiconductors | MCU, 32BIT, POWER, 400MHZ, TEPBGA-II-620; RoHS : Compliant |
| 0 | ||
| MPC8314CVRAGDA | NXP Semiconductors | MCU, 32BIT, POWER, 400MHZ, TEPBGA-II-620; RoHS : Compliant |
| 0 | ||
ADUC831BSZ-REEL![]() | Analog Devices Inc | 8 BIT MCU, 16MHZ, 34I/O, MQFP-52; RoHS : Compliant |
| 0 | ||
ADUC831BSZ-REEL![]() | Analog Devices Inc | 8 BIT MCU, 16MHZ, 34I/O, MQFP-52; RoHS : Compliant |
| 0 | ||
| MPC8315ECVRAGDA | NXP Semiconductors | MPU, MPC83XX SERIES, 400MHZ; RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | ADUC831BCPZ![]() | Analog Devices Inc | 12-bit ADC with Embedded 8-bit RoHS : Compliant |
| 979 | |
ADUC831BSZ-REEL![]() | Analog Devices Inc | 12-bit ADC with Embedded 8-bit RoHS : Compliant |
| 103 | ||
ADUC831BSZ![]() | Analog Devices Inc | 12-bit ADC with Embedded 8-bit RoHS : Compliant |
| 48 | ||
EVAL-ADUC831QSZ![]() | Analog Devices Inc | Quick Start Development System RoHS : Compliant |
| 13 | ||
ADUC831BCPZ-REEL![]() | Analog Devices Inc | 12-bit ADC with Embedded 8-bit RoHS : Compliant |
| 0 | ||
![]() NXP Semiconductors | MPC8313E-RDBC | NXP Semiconductors | PowerQUICC II Pro MPC8313E Reference Development Board rev2.2, RoHS : Not Compliant |
| 0 | |
![]() RS | DWC-8316-2 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 3 |
| 0 | |
| DWC-8315-2S | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 3 |
| 0 | ||
| DWC-8311.625-4 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, CUSHION - BOTH ENDS C; BORE - 3 |
| 0 | ||
| DWMC-8314-2EE16 | Bimba Manufacturing Company | CYLINDER, DOUBLE WALL, DBL ACT, SGL END ROD, MAGNETIC POSITION SENSING M; CUS |
| 0 | ||
| DADG-SK-C8-3 1/4"-PPR (8161140) | Festo | Seal-SET, for actuator |
| 0 | ||
| VVF9C83-100 (RCV-00104245 | VVF9C83-100 | VVF9C83100) | Carling Technologies | ACCESSORY;FITS CONTURA V-SERIES SEALED ROCKER SWITCHES |
| 0 | ||
| V1B2AJ0B-A9C83-100 (RCV-00105545 | V1B2AJ0B-A9C83-100 | V1B2AJ0BA9C83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V4D2GHTC-AAC83-100 (RCV-00108532 | V4D2GHTC-AAC83-100 | V4D2GHTCAAC83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V5DBUNNB-AAC83-100 (RCV-00105712 | V5DBUNNB-AAC83-100 | V5DBUNNBAAC83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V5D2AN0B-A9C83-100 (RCV-00107437 | V5D2AN0B-A9C83-100 | V5D2AN0BA9C83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V4D2UHTB-G9C83-100 (RCV-00109559 | V4D2UHTB-G9C83-100 | V4D2UHTBG9C83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V4D2GNTC-AAC83-100 (RCV-00107989 | V4D2GNTC-AAC83-100 | V4D2GNTCAAC83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V1B2GJJB-AAC83-100 (RCV-00108179 | V1B2GJJB-AAC83-100 | V1B2GJJBAAC83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| V1D1GHNC-F9C83-100 (RCV-00105413 | V1D1GHNC-F9C83-100 | V1D1GHNCF9C83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
| VDD2UNNB-AFC83-100 (RCV-00106887 | VDD2UNNB-AFC83-100 | VDD2UNNBAFC83100) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 0 | ||
![]() Bisco Industries | MS17988C831 | Jergens Inc | 486 | |||
| RC831-SS-20 | MISC. SPACERS/STANDOFFS/HANDLES | 225 | ||||
![]() Rochester Electronics | MPC8313EVRADDC | NXP Semiconductors | RISC Microprocessor, 32-Bit, 266MHz, CMOS, PBGA516 RoHS : Compliant |
| 30 | |
| MPC8313CVRADDC | Freescale Semiconductor | Microprocessor, 32-Bit, 266MHz, CMOS, PBGA516 RoHS : Compliant |
| 13 | ||
MPC8313CZQADDC![]() | Freescale Semiconductor | RISC Microprocessor, 266MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 320 | ||
| MPC8313CZQAFF | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 40 | ||
| MPC8313CZQAFFB | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 8 | ||
MPC8313CZQAGDC![]() | Freescale Semiconductor | RISC Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 350 | ||
| MPC8313ECZQAFFB | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 18 | ||
MPC8313ECZQAFFC![]() | Freescale Semiconductor | RISC Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 6 | ||
| MPC8313EVRAFFB | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Compliant |
| 43 | ||
| MPC8313EVRAGDB | Freescale Semiconductor | Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Compliant |
| 150 | ||
| MPC8313EZQAFF | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 40 | ||
| MPC8313ZQADDB | Freescale Semiconductor | RISC Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 2,760 | ||
MPC8313ZQADDC![]() | Freescale Semiconductor | RISC Microprocessor, 266MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 120 | ||
MPC8313ZQAGDC![]() | Freescale Semiconductor | RISC Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Not Compliant |
| 160 | ||
| MPC8314CVRAFDA | Freescale Semiconductor | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA620 RoHS : Compliant |
| 36 | ||
![]() TME | MPC8313CVRAGDC | NXP Semiconductors | IC: ARM microprocessor; SMD; f: 400MHz RoHS : Compliant |
| 30 | |
| C8314PAR | PER.PIC. | Cable for THB, Parrot hands free kit; Saab,Subaru |
| 1 | ||
| EVC831 | ifm efector inc | Cable: for sensors/automation RoHS : Compliant |
| 0 | ||
ADUC831BSZ![]() | Analog Devices Inc | IC: microcontroller 8051; Interface: I2C,SPI,UART; LQFP52 RoHS : Compliant |
| 0 | ||
| JR13WCC-8(31) | Hirose Electric Co Ltd | Accessories: gland; JR-W RoHS : Compliant |
| 0 | ||
| TCC831 | ifm efector inc | Converter: temperature |
| 0 | ||
![]() ComSIT USA | ZC831BTA | Zetex / Diodes Inc | 25V SILICON HYPERABRUPT VARACTOR DIODE Variable Capacitance Diode, 15pF C(T), 25V, Silicon, Hyperabrupt RoHS : Compliant | 42,000 | ||
| SEC51C831MB1 | Infineon Technologies AG | Electronic Component RoHS : Not Compliant | 266 | |||
| MPC8313ECZQAFF | Freescale Semiconductor | POWERQUICC II PRO PROCESSOR HARDWARE SPECIFICATIONS Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant | 65 | |||
| MPC8313EVRAFF | Freescale Semiconductor | POWERQUICC II PRO PROCESSOR HARDWARE SPECIFICATIONS Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Not Compliant | 53 | |||
ADUC831BSZ![]() | Analog Devices Inc | MICROCONVERTER, 12-BIT ADC AND DAC WITH EMBEDDED 62 KBYTES FLASH MCU Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS, PQFP52 RoHS : Compliant | 19 | |||
ADUC831BCP![]() | Analog Devices Inc | MICROCONVERTER, 12-BIT ADC AND DAC WITH EMBEDDED 62 KBYTES FLASH MCU Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS RoHS : Not Compliant | 6 | |||
![]() Interstate Connecting Components | PC83124BP-08-4-J | TE Connectivity | PC83124BP-08-4-J | 0 | ||
![]() PEI Genesis | S982-C83-1.00-12 | SOURIAU-SUNBANK |
| 0 | ||
| S982-C83-1.25-12 | SOURIAU-SUNBANK |
| 0 | |||
| S982-C83-1.50-12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | K60C831 | TE Connectivity | HV DC CONTACTOR K60C831 |
| 11 | |
![]() Richardson RFPD | ADUC831BSZ-REEL![]() | Analog Devices Inc | MCU 8-bit 8052 CISC 62KB Flash 3V/5V 52-Pin MQFP T RoHS : Compliant |
| 0 | |
EVAL-ADUC831QSZ![]() | Analog Devices Inc | ADUC831 Microcontroller Development Kit 11.0592MHz RoHS : Compliant |
| 0 | ||
ADUC831BSZ![]() | Analog Devices Inc | MCU 8-bit 8052 CISC 62KB Flash 3V/5V 52-Pin MQFP T RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | KSC831JLDLFSV | Littelfuse Inc | INSTOCK | 8,424 | ||
| ZC831BTA | INSTOCK | 2,884 | ||||
ADUC831BSZ![]() | Analog Devices Inc | INSTOCK RoHS : Compliant | 61 | |||
![]() Avnet Abacus | EC8313-000 | TE Connectivity | (Alt: EC8313-000) RoHS : Compliant | 0 | ||
| EC8311-000 | TE Connectivity | (Alt: EC8311-000) RoHS : Compliant | 0 | |||
| JR13WCC-8(31) | Hirose Electric Co Ltd | (Alt: CL0114-2049-1-31) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MPC8313VRAFFC | NXP Semiconductors | Microprocessor PowerQUICC II PRO MPC8313E Series 333 MHz 950 mV to 105 V BGA516 (Alt: MPC8313VRAFFC) RoHS : Compliant | 0 | ||
| MPC8314VRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314VRAGDA) RoHS : Compliant | 0 | |||
| MPC8314VRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314VRADDA) RoHS : Compliant | 0 | |||
| MPC8314CVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314CVRAFDA) RoHS : Compliant | 0 | |||
| MPC8314EVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314EVRAFDA) RoHS : Compliant | 0 | |||
| MPC8315EVRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315EVRAGDA) RoHS : Compliant | 0 | |||
| MPC8315EVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315EVRAFDA) RoHS : Compliant | 0 | |||
| MPC8315CVRAGDA | NXP Semiconductors | Microprocessor MPC8315 Series 400 MHz TEPBGAII191 (Alt: MPC8315CVRAGDA) RoHS : Compliant | 0 | |||
| MPC8315CVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315CVRADDA) RoHS : Compliant | 0 | |||
| MPC8313EVRAFFC | NXP Semiconductors | Microprocessor MPC8313 Series 333 MHz TEPBGAII191 (Alt: MPC8313EVRAFFC) RoHS : Compliant | 0 | |||
| MPC8314ECVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314ECVRADDA) RoHS : Compliant | 0 | |||
| MPC8314ECVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314ECVRAFDA) RoHS : Compliant | 0 | |||
| MPC8313ECVRADDC | NXP Semiconductors | MPU MPC83xx RISC 32Bit 009um 266MHz 1V18V25V33V 516Pin TEBGA Tray (Alt: MPC8313ECVRADDC) RoHS : Compliant | 0 | |||
| MPC8313ECVRAGDC | NXP Semiconductors | MPU MPC83xx RISC 32Bit 009um 400MHz 1V18V25V33V 516Pin TEBGA Tray (Alt: MPC8313ECVRAGDC) RoHS : Compliant | 0 | |||
| ALSMPC8315ECVRAGDA | NXP Semiconductors | PBGA 620 8315 NOPB ENCRYPT 12NC 935319455557 (Alt: MPC8315ECVRAGDA) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | C8317-04BFHSW0R | Hsuan Mao Technology Co | IN STOCK SHIP TODAY | 200 | ||
| LBSW-1C8316317 | AGILTRON | IN STOCK SHIP TODAY | 8 | |||
ADUC831BS![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
| MPC8313VRAFFB | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| LDC-831 | Leader America Inc | IN STOCK SHIP TODAY |
| 1 | ||
![]() EBV Elektronik | MPC8314ECVRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314ECVRAGDA) RoHS : Compliant | 216 | ||
| MPC8313EVRAFFC | NXP Semiconductors | Microprocessor MPC8313 Series 333 MHz TEPBGAII191 (Alt: MPC8313EVRAFFC) RoHS : Compliant | 80 | |||
| MPC8314CVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314CVRADDA) RoHS : Compliant | 36 | |||
| MPC8313VRAFFC | NXP Semiconductors | Microprocessor PowerQUICC II PRO MPC8313E Series 333 MHz 950 mV to 105 V BGA516 (Alt: MPC8313VRAFFC) RoHS : Compliant | 0 | |||
| MPC8314VRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314VRAGDA) RoHS : Compliant | 0 | |||
| MPC8314VRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314VRADDA) RoHS : Compliant | 0 | |||
| MPC8315EVRAGDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315EVRAGDA) RoHS : Compliant | 0 | |||
| /MPC8313E-RDBB | NXP Semiconductors | (Alt: MPC8313E-RDBB) RoHS : Compliant | 0 | |||
| MPC8315EVRAFDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315EVRAFDA) RoHS : Compliant | 0 | |||
| MPC8315CVRAGDA | NXP Semiconductors | Microprocessor MPC8315 Series 400 MHz TEPBGAII191 (Alt: MPC8315CVRAGDA) RoHS : Compliant | 0 | |||
| MPC8315CVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8315CVRADDA) RoHS : Compliant | 0 | |||
| MPC8314ECVRADDA | NXP Semiconductors | MPU MPC83xx RISC 32Bit 90nm 50MHz 620Pin TEBGA II Tray (Alt: MPC8314ECVRADDA) RoHS : Compliant | 0 | |||
| MPC8313ECVRADDC | NXP Semiconductors | MPU MPC83xx RISC 32Bit 009um 266MHz 1V18V25V33V 516Pin TEBGA Tray (Alt: MPC8313ECVRADDC) RoHS : Compliant | 0 | |||
| MPC8313ECVRAGDC | NXP Semiconductors | MPU MPC83xx RISC 32Bit 009um 400MHz 1V18V25V33V 516Pin TEBGA Tray (Alt: MPC8313ECVRAGDC) RoHS : Compliant | 0 | |||
| MPC8313ECVRAFFC | NXP Semiconductors | Microprocessor MPC8313 Series 333 MHz TEPBGAII191 (Alt: MPC8313ECVRAFFC) RoHS : Compliant | 0 | |||
![]() FDH Electronics | K60C831 | TE Connectivity | Relays |
| 0 | |
| MS21027-C831 | Safran Electrical & Power UK | Switches |
| 0 | ||
| MS21437-C831 | Safran Electrical & Power UK | Switches |
| 0 | ||
![]() Flip Electronics | MPC8314VRADDA | NXP Semiconductors | Stock RoHS : Compliant | 3,427 | ||
| MPC8314EVRADDA | NXP Semiconductors | Stock RoHS : Compliant | 3,300 | |||
| MPC8314EVRAFDA | NXP Semiconductors | Stock RoHS : Compliant | 3,084 | |||
| MPC8314VRAGDA | NXP Semiconductors | Stock RoHS : Compliant | 3,084 | |||
| MPC8315EVRAFDA | NXP Semiconductors | Stock RoHS : Compliant | 773 | |||
| MPC8315EVRAGDA | NXP Semiconductors | Stock RoHS : Compliant | 624 | |||
| MPC8313ECVRADDC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 535 | |||
| MPC8314CVRADDA | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 206 | |||
| MPC8313VRAGDC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 68 | |||
| MPC8314ECVRADDA | NXP Semiconductors | Stock RoHS : Compliant | 63 | |||
| MPC8313CVRAGDC | NXP Semiconductors | Stock RoHS : Compliant | 49 | |||
| MPC8315CVRAGDA | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 43 | |||
| MPC8313ECVRAGDC | NXP Semiconductors | Stock RoHS : Compliant | 40 | |||
| MPC8313VRAFFC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 38 | |||
| MPC8315CVRADDA | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 34 | |||
![]() Master Electronics | VVF9C83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | |
| V6D2AH0B-A9C83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
KSC831GOLLFS![]() | C&K Switches | SMT Tactile Switch - 2.55N - 32VDC - 50mA - Silver Contacts - Gullwing - Hard Actuator - 4.9mm High - Lead Free - IP67 RoHS : Compliant |
| 0 | ||
| V1D1BH0C-AKC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| EC8313-000 | TE Connectivity | Cable Markers Printable Heat Shrink Cross Linked Polyolefin Yellow MOQ Reduction RoHS : Compliant |
| 0 | ||
| V4D2GNTC-AAC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| VVA9C83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| Y78C83110FP | C&K Switches | KMR831G LFS RoHS : Compliant |
| 0 | ||
| V1D1GHNC-AAC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| V5D2AH0B-A9C83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| K60C831 | TE Connectivity | K60C831 equal RELAY PRESSURIZED SP RoHS : Not Compliant |
| 0 | ||
| VDD1AH0B-A9C83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| V4D2UHTB-AAC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| V4D2GHTC-AAC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| VDD2UNNB-AFC83-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
![]() Neutron USA | MPC8314VRAGDA | NXP Semiconductors | Microprocessors - MPU NON-ENCRYPT RoHS : Compliant |
| 50 | |
![]() Pasternack Enterprises US | PE3C8312 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Female Bulkhead Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N female bulkhead low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N female bulkhead low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8312 can also be known as a low PIM 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8312 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8312 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8312 can also be used in the other direction and will be a type N female bulkhead to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. | 135 | ||
| PE3C8312-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N female bulkhead low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N female bulkhead low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8312-12 can also be known as a low PIM 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8312-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8312-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8312-12 can also be used in the other direction and will be a type N female bulkhead to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 15 | ||
| PE3C8315-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male Right Angle to N Female Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8315-24 can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8315-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8315-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8315-24 can also be used in the other direction and will be a type N female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318LF/HS/PH135 | Pasternack Enterprises | 0 | ||||
| PE3C8315-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male Right Angle to N Female Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8315-48 can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8315-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8315-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8315-48 can also be used in the other direction and will be a type N female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8315-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male Right Angle to N Female Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8315-12 can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8315-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8315-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8315-12 can also be used in the other direction and will be a type N female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male right angle low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8318-200CM can also be known as a low PIM right angle 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8318-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8318-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8318-200CM can also be used in the other direction and will be a right angle type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8316-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male Right Angle to N Female Bulkhead Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female bulkhead low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female bulkhead low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8316-24 can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8316-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8316-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8316-24 can also be used in the other direction and will be a type N female bulkhead to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8317-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. 4.3-10 Male Right Angle to N Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8317-200CM can also be known as a low PIM right angle 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8317-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8317-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8317-200CM can also be used in the other direction and will be a type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8318-50CM can also be known as a low PIM right angle 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8318-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8318-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8318-50CM can also be used in the other direction and will be a right angle type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8318-100CM can also be known as a low PIM right angle 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8318-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8318-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8318-100CM can also be used in the other direction and will be a right angle type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N male right angle low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM right angle 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8318-24 can also be known as a low PIM right angle 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8318-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8318-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8318-24 can also be used in the other direction and will be a right angle type N male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8316-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male Right Angle to N Female Bulkhead Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female bulkhead low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female bulkhead low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8316-36 can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8316-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8316-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8316-36 can also be used in the other direction and will be a type N female bulkhead to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8318/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Cable Using TFT-5G-402 Coax with 180 Deg. Clock. PE3C8318/PH180 is a 4.3-10 male right angle to N male right angle cable using TFT-5G-402 coax. This Pasternack 4.3-10 male right angle to N male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. 4.3-10 right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C8318/PH180 4.3-10 male right angle to N male right angle cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C8316-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Male Right Angle to N Female Bulkhead Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female bulkhead low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to N female bulkhead low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8316-150CM can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8316-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N jack cable assembly PE3C8316-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8316-150CM can also be used in the other direction and will be a type N female bulkhead to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Sager | VVXXC83-100-XJC1 | Carling Technologies | Switch Actuators | 0 | ||
| VXDXKXXC-AAC83-1XX-XFB2 | Carling Technologies | Rocker Switches RoHS : Compliant | 0 | |||
| VVF9C83-100 | Carling Technologies | Switch Hardware VVF9C83100 |
| 0 | ||
KSC831JOLLFS![]() | C&K Switches | KSC831J OL LFS, TACT_EF RoHS : Compliant |
| 0 | ||
| V6D2AH0B-A9C83-100 | Carling Technologies | Rocker Switches V6D2AH0BA9C83100 RoHS : Compliant |
| 0 | ||
| VDX2XXXB-XAC83-100-XWL1 | Carling Technologies | Rocker Switches | 0 | |||
KSC831GOLLFS![]() | C&K Switches | KSC831G OL LFS, TACT_EF RoHS : Compliant |
| 0 | ||
| VDD1AH0B-A9C83-100-XST1 | Carling Technologies | Rocker Switches | 0 | |||
| VVXAC83-100-XWL1 | Carling Technologies | Switch Hardware | 0 | |||
| V1D1BH0C-AKC83-100 | Carling Technologies | Rocker Switches V1D1BH0CAKC83100 RoHS : Compliant |
| 0 | ||
| VVAAC83-13E-XAC1 | Carling Technologies | Switch Hardware | 0 | |||
| V4D2GNTC-AAC83-100 | Carling Technologies | Rocker Switches V4D2GNTCAAC83100 |
| 0 | ||
| VVA9C83-100 | Carling Technologies | Switch Hardware VVA9C83100 |
| 0 | ||
| V1D1GHNC-AAC83-100 | Carling Technologies | Rocker Switches V1D1GHNCAAC83100 RoHS : Compliant |
| 0 | ||
| V5D2AH0B-A9C83-100 | Carling Technologies | Rocker Switches V5D2AH0BA9C83100 RoHS : Compliant |
| 0 | ||
![]() Vyrian | ADUC831BS-REEL![]() | Analog Devices Inc | Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS, PQFP52 RoHS : Not Compliant | 11,589 | ||
ADUC831BCP![]() | Analog Devices Inc | Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS RoHS : Not Compliant | 10,081 | |||
ADUC831BCPZ-REEL![]() | Analog Devices Inc | Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS RoHS : Compliant | 9,183 | |||
| MPC8313ZQAGDC | NXP Semiconductors | RISC Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Not Compliant | 8,915 | |||
| KMPC8315ECVRAGDA | NXP Semiconductors | 8,550 | ||||
| KMPC8314EVRAGDA | NXP Semiconductors | 8,398 | ||||
| KMPC8313CVRAGDB | NXP Semiconductors | 7,646 | ||||
| MPC8314CVRAFDA | NXP Semiconductors | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA620 RoHS : Compliant | 6,619 | |||
| MPC8313ZQADDC | NXP Semiconductors | RISC Microprocessor, 266MHz, CMOS, PBGA516 RoHS : Not Compliant | 6,142 | |||
ADUC831BSZ-REEL![]() | Analog Devices Inc | Microcontroller, 8-Bit, FLASH, 16.78MHz, CMOS, PQFP52 RoHS : Compliant | 5,936 | |||
| MPC8315VRAFDA | NXP Semiconductors | Microprocessor, 32-Bit, 333MHz, CMOS, PBGA620 RoHS : Compliant | 4,345 | |||
| MPC8315EVRAGDA | NXP Semiconductors | Microprocessor, 32-Bit, 400MHz, CMOS, PBGA620 RoHS : Compliant | 3,368 | |||
| MPC8313VRAGDC | NXP Semiconductors | RISC Microprocessor, 32-Bit, 400MHz, CMOS, PBGA516 RoHS : Compliant | 2,775 | |||
| MPC8313VRAFFC | NXP Semiconductors | RISC Microprocessor, 32-Bit, 333MHz, CMOS, PBGA516 RoHS : Compliant | 2,704 | |||
| MPC8315CVRAGDA | NXP Semiconductors | Microprocessor, 32-Bit, 400MHz, CMOS, PBGA620 RoHS : Compliant | 2,067 | |||
![]() Win Source Electronics | DAC8311IDCKT![]() | Texas Instruments | IC DAC 14BIT 1CH V-OUT SC70-6 RoHS : Compliant |
| 35,846 | |
DAC8311IDCKR![]() | Texas Instruments | 1.8V to 5.5V, 80mA, 14- and 16-Bit, Low-Power, Single-Channel, DIGITAL-TO-ANALOG CONVERTERS in SC70 Package RoHS : Compliant |
| 6,000 | ||
ADUC831BSZ![]() | Analog Devices Inc | IC MCU 8BIT 62KB FLASH 52MQFP RoHS : Compliant |
| 3,233 | ||
ADUC831BSZ-REEL![]() | Analog Devices Inc | IC MCU 8BIT 62KB FLASH 52MQFP RoHS : Compliant |
| 3,070 | ||
ADUC831BS![]() | Analog Devices Inc | MicroConverter, 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU RoHS : Not Compliant |
| 3,000 | ||
| MPC8313CVRAFFC | Freescale Semiconductor | IC MPU MPC83XX 333MHZ 516BGA RoHS : Compliant |
| 1,400 | ||
| MPC8315VRAGDA | Freescale Semiconductor | IC MPU MPC83XX 400MHZ 620BGA RoHS : Compliant |
| 1,327 | ||
| MPC8314ECVRAGDA | Freescale Semiconductor | IC MPU MPC83XX 400MHZ 620BGA RoHS : Compliant |
| 612 | ||
| MPC8314ECVRAGDA400/266MHZ | Freescale Semiconductor |
| 560 | |||
| MPC8313CVRAFFB | Freescale Semiconductor | IC MPU MPC83XX 333MHZ 516BGA RoHS : Compliant |
| 508 | ||
| MPC8313VRAFFB | Freescale Semiconductor | IC MPU MPC83XX 333MHZ 516BGA RoHS : Compliant |
| 209 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |