 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
MCL001AXMB Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 PUI | PCR1J220MCL1GS | Nichicon Corporation | RoHS : Compliant |
| 3,000 | |
 Avnet Silica | MCL4148_R1_10001 | PanJit Semiconductor | Small Signal Switching Diode Single 100 V 150 mA 1 V 4 ns 500 mA MicroMELF 2 Pins (Alt: MCL4148_R1_10001) RoHS : Compliant | 2,157,000 | ||
| MCL4148_ R2 _10001 | PanJit Semiconductor | Small Signal Switching Diode Single 100 V 150 mA 1 V 4 ns 500 mA MicroMELF 2 Pins (Alt: MCL4148_R2_10001) RoHS : Compliant | 950,000 | |||
| MCL4448_R1_10001 | PanJit Semiconductor | Diode Switching 100V 015A 2Pin MICROMELF Plastic TR (Alt: MCL4448_R1_10001) RoHS : Compliant | 156,000 | |||
| FRDM-MC-LVPMSM | NXP Semiconductors | Daughter Board FRDM Platform Low Voltage 3 Phase PMSM Motor Controller 2428VDC (Alt: FRDM-MC-LVPMSM) RoHS : Compliant | 0 | |||
| STTFS015N10MCL | onsemi | Power MOSFET N Channel 100V 42 A 129mO Power MOSFET N Channel 100V 42 A 129mO (Alt: STTFS015N10MCL) RoHS : Compliant | 0 | |||
| SW574XP-SMCL401P | NXP Semiconductors | (Alt: SW574XP-SMCL401P) RoHS : Compliant | 0 | |||
| NVMJD027N10MCLTWG | onsemi | MOSFET Power Dual NChannel 100 V 26 mO28A (Alt: NVMJD027N10MCLTWG) RoHS : Compliant | 0 | |||
| NVMFS027N10MCLT1G | onsemi | Single NChannel Power MOSFET 100V 28A 26mO (Alt: NVMFS027N10MCLT1G) RoHS : Compliant | 0 | |||
| NTTFS010N10MCLTAG | onsemi | Power MOSFET N Channel 100V 50 A 106mO Power MOSFET N Channel 100V 50 A 106mO (Alt: NTTFS010N10MCLTAG) RoHS : Compliant | 0 | |||
| NVMFS015N10MCLT1G | onsemi | Single NChannel Power MOSFET 100V 471A 122mO (Alt: NVMFS015N10MCLT1G) RoHS : Compliant | 0 | |||
| NVMFWS005N10MCLT1G | onsemi | MOSFET Power Single NChannel100 V 51 mO 108A Wettable flank option (Alt: NVMFWS005N10MCLT1G) RoHS : Compliant | 0 | |||
| NVMFWS021N10MCLT1G | onsemi | Single NChannel Power MOSFET 100 V 31 A 23 mO (Alt: NVMFWS021N10MCLT1G) RoHS : Compliant | 0 | |||
| NVTFWS010N10MCLTAG | onsemi | Single NChannel Power MOSFET 100V 578 A 106 mO (Alt: NVTFWS010N10MCLTAG) RoHS : Compliant | 0 | |||
| NVMFWS002N10MCLT1G | onsemi | MOSFET Power Single NChannel 100 V 28mO 177A (Alt: NVMFWS002N10MCLT1G) RoHS : Compliant | 0 | |||
| NVMFWS3D6N10MCLT1G | onsemi | Single NChannel Power MOSFET 100 V 131 A 36mO (Alt: NVMFWS3D6N10MCLT1G) RoHS : Compliant | 0 | |||
 EBV Elektronik | MCL4148-TR3 | Vishay Intertechnologies | SWITCHING DIODE GENPURP MICROMELF (Alt: MCL4148-TR3) RoHS : Compliant | 8,430,000 | ||
| MCL4148-TR | Vishay Intertechnologies | Small Signal Diode Single 100 V 200 mA 1 V 4 ns 2 A (Alt: MCL4148-TR) RoHS : Compliant | 2,595,000 | |||
| MCL103A-TR | Vishay Intertechnologies | (Alt: MCL103A-TR) RoHS : Compliant | 685,000 | |||
| XPH3R114MC,L1XHQ(O | Toshiba America Electronic Components | Power MOSFET P Channel 40 V 100 A 3100 ohm SOP Advance Surface Mount (Alt: XPH3R114MC,L1XHQ(O) RoHS : Compliant | 15,000 | |||
| MCL103B-TR | Vishay Intertechnologies | (Alt: MCL103B-TR) RoHS : Compliant | 12,500 | |||
| MCL101C-TR | Vishay Intertechnologies | (Alt: MCL101C-TR) RoHS : Compliant | 10,000 | |||
| XPH4R714MC,L1XHQ(O | Toshiba America Electronic Components | Power MOSFET P Channel 40 V 60 A 4700 ohm SOP Advance Surface Mount (Alt: XPH4R714MC,L1XHQ(O) RoHS : Compliant | 10,000 | |||
| FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 800 | |||
| NVMFS027N10MCLT1G | onsemi | Single NChannel Power MOSFET 100V 28A 26mO (Alt: NVMFS027N10MCLT1G) RoHS : Compliant | 0 | |||
| NTTFS010N10MCLTAG | onsemi | Power MOSFET N Channel 100V 50 A 106mO Power MOSFET N Channel 100V 50 A 106mO (Alt: NTTFS010N10MCLTAG) RoHS : Compliant | 0 | |||
| NVMFS015N10MCLT1G | onsemi | Single NChannel Power MOSFET 100V 471A 122mO (Alt: NVMFS015N10MCLT1G) RoHS : Compliant | 0 | |||
| NVMFWS005N10MCLT1G | onsemi | MOSFET Power Single NChannel100 V 51 mO 108A Wettable flank option (Alt: NVMFWS005N10MCLT1G) RoHS : Compliant | 0 | |||
| NVMFWS021N10MCLT1G | onsemi | Single NChannel Power MOSFET 100 V 31 A 23 mO (Alt: NVMFWS021N10MCLT1G) RoHS : Compliant | 0 | |||
| NVTFWS010N10MCLTAG | onsemi | Single NChannel Power MOSFET 100V 578 A 106 mO (Alt: NVTFWS010N10MCLTAG) RoHS : Compliant | 0 | |||
| NVMFWS002N10MCLT1G | onsemi | MOSFET Power Single NChannel 100 V 28mO 177A (Alt: NVMFWS002N10MCLT1G) RoHS : Compliant | 0 | |||
 Pasternack Enterprises US | TCP-240-716MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF. TCP-240-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-240-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-716MC-LP features a 80 µin minimum body plating specification. The TCP-240-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.781 inches, a width of 1.26 inches, and a weight of 0.13 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 48 | |
| TCP-240-4310MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240. TCP-240-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-240-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-4310MC-LP features a 100 µin minimum body plating specification. The TCP-240-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. The Pasternack low PIM 4.3-10 male connector has a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.51 inches, a width of 0.866 inches, and a weight of 0.11 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 18 | ||
| TCP-400-716MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF. TCP-400-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-400-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-716MC-LP features a 80 µin minimum body plating specification. The TCP-400-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.758 inches, a width of 1.26 inches, and a weight of 0.14 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 16 | ||
| TCP-400-NMC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400. TCP-400-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-400-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-NMC-LP features a 80 µin minimum body plating specification. The TCP-400-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.703 inches, a width of 0.748 inches, and a weight of 0.1 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 13 | ||
| TCP-600-4310MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF. TCP-600-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-600-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-4310MC-LP features a 80 µin minimum body plating specification. The TCP-600-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.789 inches, a width of 0.866 inches, and a weight of 0.27 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 10 | ||
| TCP-400-4310MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 4.3-10, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-400, Interface Type 2: TCOM-400-FR, Interface Type 3: LMR-400, Interface Type 4: LMR-400-DB, Interface Type 5: LMR-400-FR, Interface Type 6: LMR-400-UF, Interface Type 7: LMR-LW400, Interface Type 8: PE-C400, Interface Type 9: PE-B400, Interface Type 10: PE-B405. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF. TCP-400-4310MC-LP 4.3-10 male coaxial connector has an interface type of 4.3-10 male which is compatible with TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF, LMR-LW400, PE-C400, PE-B400 and PE-B405 cables and has an impedance of 50 Ohms. Pasternack's 4.3-10 male connector uses clamp/solder as an attachment method. Our male 4.3-10 coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 4.3-10 male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 4.3-10 male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 4.3-10 coaxial connector has a brass body with tri-metal plating. Our TCP-400-4310MC-LP 4.3-10 connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-400-4310MC-LP features a 80 µin minimum body plating specification. The TCP-400-4310MC-LP 4.3-10 low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 4.3-10 coaxial RF connector has a maximum insertion loss of 0.245 dB. This 4.3-10 connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 4.3-10 male connector has a length of 1.632 inches, a width of 0.866 inches, and a weight of 0.12 lbs. This Pasternack low PIM male 4.3-10 connector will ship the same business day as purchased. Our 4.3-10 male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 3 | ||
| TCP-240-NMC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-240, Interface Type 2: TCOM-240-FR, Interface Type 3: LMR-240, Interface Type 4: LMR-240-DB, Interface Type 5: LMR-240-FR, Interface Type 6: LMR-240-UF, Interface Type 7: LMR-LW240, Interface Type 8: PE-C240. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240. TCP-240-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-240, TCOM-240-FR, LMR-240, LMR-240-DB, LMR-240-FR, LMR-240-UF, LMR-LW240 and PE-C240 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-240-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-240-NMC-LP features a 100 µin minimum body plating specification. The TCP-240-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.545 inches, a width of 0.748 inches, and a weight of 0.09 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 2 | ||
| TCP-600-716MC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. 7/16 DIN Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF. TCP-600-716MC-LP 7/16 DIN male coaxial connector has an interface type of 7/16 DIN male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's 7/16 DIN male connector uses clamp/solder as an attachment method. Our male 7/16 DIN coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This 7/16 DIN male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack 7/16 DIN male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TCP-600-716MC-LP 7/16 DIN connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-716MC-LP features a 80 µin minimum body plating specification. The TCP-600-716MC-LP 7/16 DIN low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male 7/16 DIN coaxial RF connector has a maximum insertion loss of 0.245 dB. This 7/16 DIN connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our 7/16 DIN male connector has a length of 1.783 inches, a width of 1.26 inches, and a weight of 0.2 lbs. This Pasternack low PIM male 7/16 DIN connector will ship the same business day as purchased. Our 7/16 DIN male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 0 | ||
| TCP-600-NMC-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TCOM-600, Interface Type 2: TCOM-600-FR, Interface Type 3: LMR-600, Interface Type 4: LMR-600-DB, Interface Type 5: LMR-600-FR, Interface Type 6: LMR-600-UF, Interface Type 7: LMR-LW600, Interface Type 8: PE-C600. N Male Low PIM Connector Clamp/Solder Attachment for TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600. TCP-600-NMC-LP type N male coaxial connector has an interface type of type N male which is compatible with TCOM-600, TCOM-600-FR, LMR-600, LMR-600-DB, LMR-600-FR, LMR-600-UF, LMR-LW600 and PE-C600 cables and has an impedance of 50 Ohms. Pasternack's type N male connector uses clamp/solder as an attachment method. Our male type N coaxial connector provides a maximum frequency of 6 GHz. This RF connector has low passive intermodulation of a -160dBc. This type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's type N coaxial connector has a brass body with tri-metal plating. Our TCP-600-NMC-LP type N connector uses asilver-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality TCP-600-NMC-LP features a 80 µin minimum body plating specification. The TCP-600-NMC-LP type N low PIM connector operates at a temperature range of -40 to 125 deg C. This threaded male type N coaxial RF connector has a maximum insertion loss of 0.245 dB. This type N connector has a silver inner contact plating. It also consists of a brass retaining ring that meets silver compliance. Our type N male connector has a length of 1.902 inches, a width of 0.961 inches, and a weight of 0.26 lbs. This Pasternack low PIM male type N connector will ship the same business day as purchased. Our type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave. |
| 0 | ||
 Venkel Ltd. | MCL0606FRGB4T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;RGB RoHS : Compliant | 29,131 | ||
| MCL0805FRGB1T | VENKEL LTD | Multi-Color LED;0805;Flat Lens;RGB RoHS : Compliant | 8,000 | |||
| MCL0606FYW1RD1T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;Yellow;Red RoHS : Compliant | 4,000 | |||
| MCL1210FRGB1T | VENKEL LTD | Multi-Color LED;1210;Flat Lens;RGB RoHS : Compliant | 0 | |||
| MCL1411FRGB1T-LF | VENKEL LTD | Multi-Color LED;1411;Flat Lens;RGB;Lead Frame RoHS : Compliant | 0 | |||
| MCL1204RRGB1T | VENKEL LTD | Multi-Color LED;1204;Right Angle Lens;RGB RoHS : Compliant | 0 | |||
| MCL0805FBL2RD2T | VENKEL LTD | Multi-Color LED;0805;Flat Lens;Blue;Red RoHS : Compliant | 0 | |||
| MCL0606FRGB3T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;RGB RoHS : Compliant | 0 | |||
| MCL1204DRGB1T | VENKEL LTD | Multi-Color LED;1204;Dome Lens;RGB RoHS : Not Compliant | 0 | |||
| MCL0606FRGB2T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;RGB RoHS : Compliant | 0 | |||
| MCL0805FBL1GR1T | VENKEL LTD | Multi-Color LED;0805;Flat Lens;Blue;Green RoHS : Compliant | 0 | |||
| MCL0805FRD1BL1T | VENKEL LTD | Multi-Color LED;0805;Flat Lens;Red;Blue RoHS : Compliant | 0 | |||
| MCLA30RRD1GR1B | VENKEL LTD | 3.0mm Round Red; Green LED Array RoHS : Not Compliant | 0 | |||
| MCL0606FBL1RD1T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;Blue;Red RoHS : Compliant | 0 | |||
| MCL0606FRD1GR1T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;Red;Green(Yellow Green) RoHS : Compliant | 0 | |||
 Vyrian | PCH1J560MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 56uF, Surface Mount, 3333 RoHS : Compliant | 17,514 | ||
| UWX0G331MCL1GB | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 4V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333 RoHS : Compliant | 13,551 | |||
| UWD1A102MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141 RoHS : Compliant | 13,356 | |||
| UZG0J330MCL1GB | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2121 RoHS : Compliant | 12,643 | |||
| PCV1D331MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 20V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141 RoHS : Compliant | 12,424 | |||
| UCB1V220MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 2626 RoHS : Compliant | 12,289 | |||
| PCG0J151MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2121 RoHS : Compliant | 10,120 | |||
| UCL1A151MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 150uF, Surface Mount, 2626 RoHS : Compliant | 9,158 | |||
P4802ACMCL | Littelfuse Inc | SIDAC RoHS : Compliant | 9,143 | |||
| UUD1H330MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2626 RoHS : Compliant | 8,344 | |||
P0084UCMCLTP | Littelfuse Inc | Thyristor Surge Protector RoHS : Compliant | 8,318 | |||
P0720ECMCLRP1 | Littelfuse Inc | Thyristor Surge Protector, 88V V(BO) Max, 30A RoHS : Compliant | 8,064 | |||
PCR1E471MCL1GS | Nichicon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 4141 RoHS : Compliant | 6,532 | |||
| P0300ECMCLAP | Littelfuse Inc | Thyristor Surge Protector, 40V V(BO) Max, 30A RoHS : Compliant | 5,861 | |||
| P0720ECMCLAP | Littelfuse Inc | Thyristor Surge Protector, 88V V(BO) Max, 30A RoHS : Compliant | 5,040 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand