 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
P48.. Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | 5KP48CA | Diotec Semiconductor AG | Diode: TVS; 53.3÷61.3V; bidirectional; P600; 5kW; 5KP; Ammo Pack RoHS : Compliant |
| 402 | |
| A251MP482Q025A | YAGEO Corporation | Capacitor: electrolytic; low ESR; 4.8mF; 25VDC; -10÷30%; Z: 28mΩ |
| 367 | ||
| 34ASP48T7M1RT | Grayhill Inc | Switch: toggle; SPDT; (ON)-OFF-(ON); Leads: for soldering; brass RoHS : Compliant |
| 181 | ||
| 5KP48A-E3/54 | Vishay Intertechnologies | Diode: TVS; 5kW; 53.3V; 64.6A; unidirectional; P600; TransZorb®; 5KP RoHS : Compliant |
| 0 | ||
| 5KP48C TR | Fagor Electrónica | Diode: TVS; bidirectional; P600; 5kW; 5KP; reel |
| 0 | ||
| CHP 48 LS29 | ILME UK Ltd | Enclosure for connectors: HDC; size 104.62; with latch; C-TYPE |
| 0 | ||
| CRW20FP4--84R5 | Viking Technology | Resistor: thick film; 84.5Ω; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW20FP4--8K06 | Viking Technology | Resistor: thick film; 8.06kΩ; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW20FP4--8R45 | Viking Technology | Resistor: thick film; 8.45Ω; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW25FP4--84R5 | Viking Technology | Resistor: thick film; 84.5Ω; SMD; 1225; 3W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW25FP4--8K06 | Viking Technology | Resistor: thick film; 8.06kΩ; SMD; 1225; 3W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW25FP4--8R45 | Viking Technology | Resistor: thick film; 8.45Ω; SMD; 1225; 3W; ±1%; CRW; -55÷155°C |
| 0 | ||
DRC3P48D400 | Crydom Inc | Relay: solid state; 4.8A; Uswitch: 48÷480VAC; 3-phase; IP20; DRC RoHS : Compliant |
| 0 | ||
| CRW20FP4--825K | Viking Technology | Resistor: thick film; 825kΩ; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
| CRW20FP4--866K | Viking Technology | Resistor: thick film; 866kΩ; SMD; 1020; 2W; ±1%; CRW; -55÷155°C |
| 0 | ||
 Verical | P4802SCLRP | Littelfuse Inc | Thyristor Surge Protection Devices 440V 30A 2-Pin SMB T/R RoHS : Exempt |
| 1,542 | |
| P4-824222 | OTTO Engineering Inc | P4-824222 |
| 48 | ||
 Avnet Americas | SP481EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Tape and Reel (Alt: SP481EEN-L/TR) RoHS : Compliant |
| 2,500 | |
MCP4821-E/MS | Microchip Technology Inc | Digital to Analog Converter, 1 Channel, 12 bit, Voltage, Serial Microwire, SPI, 2.7 V to 5.5 V - Rail/Tube (Alt: MCP4821-E/MS) RoHS : Compliant |
| 900 | ||
| HFJ11-RP48E-L12RL | Halo Electronics Inc | Conn RJ-45 F 8 POS 2.54mm Solder RA Thru-Hole 14 Terminal 1 Port - Rail/Tube (Alt: HFJ11-RP48E-L12RL) RoHS : Compliant |
| 397 | ||
| HDSP-4850 | Broadcom Limited | - Rail/Tube (Alt: HDSP-4850) RoHS : Compliant |
| 363 | ||
| SP485CN-L | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Rail/Tube (Alt: SP485CN-L) RoHS : Compliant |
| 98 | ||
| SP483CN-L | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Rail/Tube (Alt: SP483CN-L) RoHS : Compliant |
| 98 | ||
| HDSP-4840 | Broadcom Limited | - Rail/Tube (Alt: HDSP-4840) RoHS : Compliant |
| 69 | ||
MCP4811-E/MC | Microchip Technology Inc | Digital to Analog Converter, 1 Channel, 10 bit, Voltage, Serial Microwire, SPI, 2.7 V to 5.5 V - Rail/Tube (Alt: MCP4811-E/MC) RoHS : Compliant |
| 54 | ||
| MCP48FEB24-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 4 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB24-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB08-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB08-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB04-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 4 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB04-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FEB28-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB28-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB08-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB08-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP48FEB28-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB28-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP4822-E/MS | Microchip Technology Inc | - Rail/Tube (Alt: MCP4822-E/MS) RoHS : Compliant |
| 1 | ||
 Arrow Electronics | P4802SCLRP | Littelfuse Inc | Thyristor Surge Protection Devices 440V 30A 2-Pin SMB T/R RoHS : Exempt |
| 1,542 | |
 Newark | MCP4822-E/SN | Microchip Technology Inc | Conv D/A, Microchip Mcp4822-E/Sn; |Microchip Technology MCP4822-E/SN RoHS : Compliant |
| 2,631 | |
| MCP4811T-E/MS | Microchip Technology Inc | Da Converter, 10Bit, Msop-8; |Microchip Technology MCP4811T-E/MS RoHS : Compliant |
| 1,915 | ||
| MCP4811T-E/MS | Microchip Technology Inc | Da Converter, 10Bit, Msop-8; |Microchip Technology MCP4811T-E/MS RoHS : Compliant |
| 1,915 | ||
| MP4865AGBD-T | Monolithic Power Systems | Analog Switch, Spst, Bga-144, 125Deg C; |Monolithic Power Systems (Mps) MP4865AGBD-T RoHS : Compliant |
| 793 | ||
| K07R-DRFA5-6AP48 | Amphenol Communications Solutions | Ffc/Fpc Conn, R/A Rcpt, 48P, 2Row, 1.8Mm; |Amphenol Communications Solutions K07R-DRFA5-6AP48 RoHS : Compliant |
| 558 | ||
| MCP48FVB12-E/UN | Microchip Technology Inc | Dac, 10Bit, Dual, Msop-10; |Microchip Technology MCP48FVB12-E/UN RoHS : Compliant |
| 33 | ||
| EP4824 | Hammond Manufacturing | Encl Accessory, Inner Panel, Steel, Wht; |Hammond EP4824 RoHS : Compliant |
| 31 | ||
| CP486018 | nVent Hoffman | Metal Enclosure; |Nvent Hoffman CP486018 RoHS : Compliant |
| 13 | ||
| CPP48HDEWBL | Panduit Corp | Patch Panel, Unloaded, 48Port, 1U; Connector Type:Unloaded Patch Panel; No. Of Ports:48Ports; Lan Category:-; Rack U Height:1U; Product Range:Mini-Com Series Rohs Compliant: Yes |Panduit CPP48HDEWBL RoHS : Compliant |
| 10 | ||
| QPP48HDBL | Panduit Corp | Qn Patch Pnl, Rj45, 48Port; Connector Type:Rj45; No. Of Ports:48Ports; Lan Category:-; Rack U Height:1U Rohs Compliant: Yes |Panduit QPP48HDBL RoHS : Compliant |
| 7 | ||
| DRC3P48D420 | Crydom Inc | Solid State Contactor, 530V, 5A, Din; |Sensata/crydom DRC3P48D420 RoHS : Compliant |
| 7 | ||
| 9B1TP48P0H001 | Sanyo-Denki Cooling | Fan Blower, 622Cfm, 76.8W, 48V; |Sanyo Denki 9B1TP48P0H001 RoHS : Compliant |
| 2 | ||
| CLCBP48BK | Hammond Manufacturing | Bottom Panel, Clc Series Cabinets, Black; |Hammond CLCBP48BK RoHS : Compliant |
| 1 | ||
| TSOP48-DIP48 | Batronix Elektronik | Adaptor, Tsop48 To Dip48, Bx48/448/848; |Batronix TSOP48-DIP48 RoHS : Compliant |
| 1 | ||
| RP-4800-NO.2-0-SP | TE Connectivity | Heat Shrink Tubing, Black, 4:1, 60M; Shr |Te Connectivity Raychem RP-4800-NO.2-0-SP RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | OP482ACBZ-R7 | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 223,200 | |
OP482GSZ-REEL7 | Analog Devices Inc | QUAD LOW WR JFET OP AMP RoHS : Compliant |
| 19,150 | ||
| OP482GSZ-REEL | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 17,500 | ||
| OP484ESZ-REEL | Analog Devices Inc | 3REC RAIL TO RAIL OP AMP TAPE RoHS : Compliant |
| 3,435 | ||
| OP482GSZ | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 2,534 | ||
| OP481GSZ-REEL7 | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 2,000 | ||
| OP481GSZ | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 1,916 | ||
| OP484FSZ-REEL7 | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 377 | ||
| OP484FSZ | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 356 | ||
OP484FPZ | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 343 | ||
OP481GRUZ-REEL | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 333 | ||
| OP484ESZ | Analog Devices Inc | PREC RAILTO RAIL OP AMP RoHS : Compliant |
| 306 | ||
| OP482GPZ | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 86 | ||
| OP484FSZ-REEL | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 0 | ||
 RS | 14.5T8/BCP/48-840/MF18/G 25/1 (577775) | Philips Semiconductors | LED BULB, 48IN T8, 14.5 WATTS, 4000 KELVIN, 1800 LUMENS, 120-277 VOLTS, UL TY: |
| 25 | |
| 16.5T8/BCP/48-850/MF21/G 25/1 (579060) | Philips Semiconductors | LED BULB, 48IN T8, 16.5 WATTS, 5000 KELVIN, 2100 LUMENS, 120-277 VOLTS, UL TY: |
| 23 | ||
| STP480Y07M | Mersen Electrical Power | SURGE PROTECTION DEVICE, PLUGGABLE, 3 POLE,3 PHASE, 277/480VAC, STP SERIES |
| 21 | ||
| C5A1P-489 | American Electrical Inc | CIRCUIT BREAKER, HYD/MAG, TOGL, CUR-RTG 5A, DIN RAIL, 1 POLE, VOL-RTG 120/240V |
| 18 | ||
| OD172SAP-48HHB10AZX (OD172SAP-48HHB10AZ) | Orion Fans | DC FAN,48V 172 X 150 X 51MM, REVERSIBLE FLOW |
| 12 | ||
| DPP480-48-3 (DRB480-48-1) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,48V,10A,340-575V IN, ENCLOSED, DIN RAIL, PFC,480W, DPP SERIES |
| 6 | ||
| AP48 | Altra Industrial Motion Corp | V-BELT;SURE GRIP;A SECTION;.5000" WIDTH;50.3" LENGTH;.3438" HEIGHT;DIENE |
| 2 | ||
| STP480D07 | Mersen Electrical Power | SURGE PROTECTION DEVICE, PLUGGABLE,3 POLE,3 PHASE DELTA,480VAC, STP SERIES RoHS : Compliant |
| 2 | ||
| STP480YN07M | Mersen Electrical Power | SURGE PROTECTION DEVICE, PLUGGABLE, 4 POLE,3 PHASE, 277/480VAC, STP SERIES |
| 2 | ||
| MCP4822-E/SN | Microchip Technology Inc | DUAL 12-BIT DAC WITH SPI INTERACE AND INTERNAL VREF, SOIC-8 RoHS : Compliant |
| 2 | ||
| BT-CAT6P1HP-48W | L-com Inc | SURGE PROTECTOR, HYPERLINK, CAT6, RJ45, CAST ALUMINUM, TWO SHIELDED JACKS |
| 2 | ||
| EP4824 | Hammond Manufacturing | ACCESSORY, PANEL, INNER PANEL, MILD STEEL, WHITE |
| 1 | ||
| SP-48-A | Ruland Manufacturing Co Inc | SHAFT COLLAR, TWO-PIECE, BORE 3.0000",OD 4 1/4",W 0.875",2024 ALUMINUM |
| 1 | ||
| CP486018 | nVent Hoffman | CONCEPT HMI ENCLOSURE, 480 X 600 X 180MM, STEEL, WHITE, LIGHT GRAY |
| 1 | ||
| IKS-6726A-2GTXSFP-48-T | Moxa Inc | ETHERNET SWITCH, MANAGED, 26 PORTS, 2 TX SFP COMBO PORTS, 48 VOLT, EXT TEMP |
| 1 | ||
 Microchip Technology Inc | MCP4811T-E/MSVAO | Microchip Technology Inc | Single 10-bit DAC with SPI interface and internal Vref, MSOP, Projected EOL: 2051-06-20 RoHS : Compliant |
| 15,000 | |
MCP4811-E/P | Microchip Technology Inc | Single 10-bit DAC with SPI interface and internal Vref, PDIP, Projected EOL: 2036-04-16 RoHS : Compliant |
| 13,288 | ||
| MCP48CMD22-E/MF | Microchip Technology Inc | 12-bit, Dual Channel DAC with MTP memory and SPI Interface, DFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 13,112 | ||
| MCP4811-E/MC | Microchip Technology Inc | Single 10-bit DAC with SPI interface and internal Vref, DFN, Projected EOL: 2036-04-16 RoHS : Compliant |
| 10,800 | ||
| MCP48CMD21-E/MF | Microchip Technology Inc | 12-bit, Single Channel DAC with MTP memory and SPI Interface, DFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 10,680 | ||
| MCP4811T-E/MC | Microchip Technology Inc | Single 10-bit DAC with SPI interface and internal Vref, DFN, Projected EOL: 2036-04-16 RoHS : Compliant |
| 9,700 | ||
| MCP48CVB08T-E/ML | Microchip Technology Inc | SPI Octal 8-Bit Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 3,300 | ||
| MCP48FEB08T-E/MQ | Microchip Technology Inc | 8/10/12 -bit Octal DAC with SPI/I2C Interface and EEPROM, QFN, Projected EOL: 2046-06-29 RoHS : Compliant |
| 3,300 | ||
| MCP4802T-E/MS | Microchip Technology Inc | DUAL 8-bit DAC with SPI interface and internal Vref, MSOP, Projected EOL: 2036-04-15 RoHS : Compliant |
| 2,255 | ||
| MCP48FVB08-E/MQ | Microchip Technology Inc | 8/10/12 -bit Octal DAC with SPI/I2C Interface and EEPROM, QFN, Projected EOL: 2046-06-29 RoHS : Compliant |
| 2,117 | ||
| MCP48CVD01-E/MF | Microchip Technology Inc | 8-bit, Single Channel Volatile DAC with SPI Interface, DFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 1,200 | ||
| MCP48CMD21-E/MG | Microchip Technology Inc | SPI Single 12-Bit Non-Volatile, QFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 819 | ||
| MCP4801-E/MC | Microchip Technology Inc | Single 8-bit DAC with SPI interface and internal Vref, DFN, Projected EOL: 2036-04-16 RoHS : Compliant |
| 750 | ||
| MCP48CVD02-E/MF | Microchip Technology Inc | 8-bit, Dual Channel Volatile DAC with SPI Interface, DFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 673 | ||
| MCP48CMD22-E/MG | Microchip Technology Inc | 12-bit, Dual Channel DAC with MTP memory and SPI Interface, QFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 23 | ||
 Onlinecomponents.com | P48-W | Leviton Manufacturing Co | 5-Gang 4-Toggle 1-Duplex Device Combination Wallplate, Standard Size, Painted Metal, Device Mount - White RoHS : Compliant |
| 0 | |
| GKS-P48 | Thomas & Betts | Metal Thrd Throat Insultr MPG48. RoHS : Compliant |
| 0 | ||
| SWA-P48 | Thomas & Betts | PMA Accessories - SWA-P - Metal Swivel-Adapter - Metal Thread PG48 - Thread Length 15mm - Material Nickel Plated Brass - IP68, IP69 RoHS : Compliant |
| 0 | ||
| SCA-P48 | Thomas & Betts | PMA SCA-P Positioning Adapter - Material Brass - Nickel-Plated Finish - PG Thread 48 RoHS : Compliant |
| 0 | ||
| TK26E-P48 | Fuji Electric Co Ltd | RoHS : Compliant |
| 0 | ||
| BDR-P48 | Thomas & Betts | Thread Spacer with Seal Ring - PG Thread - Thread 48 - Color Black. RoHS : Compliant |
| 0 | ||
| 49013-P48 | Leviton Manufacturing Co | Voice-Grade Patch Panel, 48-port, 2RU, 8P4C Jacks, 110 style termination RoHS : Compliant |
| 0 | ||
| N252-P48 | Tripp Lite | 48PT CAT6A PTCH PNL,PNCHDWN,BK RoHS : Compliant |
| 0 | ||
| PPMDI-P48-12N | L-com Inc | Passive PM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| PPMDI-P48-191 | L-com Inc | Passive PM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| PSMDI-P48-191 | L-com Inc | Passive SM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| 10-690658-P48 | Amphenol Commercial | PG48 RoHS : Compliant |
| 0 | ||
| HFAK-P48/48 | Thomas & Betts | PMA EMC Adapter - PG Thread - P48/P48 - Aluminum - Nickel-Plated Finish RoHS : Compliant |
| 0 | ||
| PSMDI-P48-12N | L-com Inc | Passive SM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| IDD-25-G-P48 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | IP4855CX25/P,135 | NXP Semiconductors | Interface Circuit, PBGA25 RoHS : Compliant |
| 10,261 | |
IP4856CX25/CZ | Nexperia | Interface Circuit, PBGA25 RoHS : Compliant |
| 2 | ||
TIP48G | onsemi | Trans BJTs Single 300V 1A TO-220-3 Tube RoHS : Compliant |
| 30 | ||
| OP484ESZ | Analog Devices Inc | Op Amp Standard 4.25MHz 14-SOIC Tube RoHS : Compliant |
| 34 | ||
| OP481GSZ | Analog Devices Inc | Op Amp Standard 105kHz 14-SOIC Tube RoHS : Compliant |
| 689 | ||
| OP481GS-REEL7 | Analog Devices Inc | UltraLow Power, Rail-To-Rail Output Operational Amplifier RoHS : Not Compliant |
| 1,474 | ||
| OP482GP | Analog Devices Inc | OP482 - Low Power, High Speed JFET Quad Operational Amplifier ' RoHS : Not Compliant |
| 12,464 | ||
| 32P4802-CGT | Texas Instruments | Analog Computer Storage RoHS : Not Compliant |
| 48,654 | ||
| HSP48212JC-40 | Harris Semiconductor | Mixer, 12-Bit, CMOS, PQCC68 RoHS : Not Compliant |
| 228 | ||
| HSP48410JC-33 | Harris Semiconductor | Histogram Processor, 24-Bit, CMOS, PQCC84 RoHS : Not Compliant |
| 74 | ||
| HSP48901GC-20 | Harris Semiconductor | Digital Filter, 8-Bit, CMOS, CPGA68 RoHS : Not Compliant |
| 1,755 | ||
HSP48212JC-40 | Intersil Corporation | Mixer, 12-Bit, CMOS, PQCC68 RoHS : Not Compliant |
| 714 | ||
HSP48410JC-33 | Intersil Corporation | Histogram Processor, 24-Bit, CMOS, PQCC84 RoHS : Not Compliant |
| 1,769 | ||
| SP485RCN/TR | Sipex Corporation | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 RoHS : Not Compliant |
| 1,113 | ||
| SP488CS-L | Sipex Corporation | Line Receiver, PDIP16 RoHS : Compliant |
| 20 | ||
 Sager | PMP4825WP | Crydom Inc | Solid State Relays - Industrial Mount 25A 345-530VAC IOP, Elevator Scrw RoHS : Compliant |
| 0 | |
| MTP48K3SNO | Switchcraft Conxall | Patch Panels 3 1/2 WIRED JACKFIE |
| 0 | ||
| LFZVC72NP48E4 | Bel Power Solutions | Desktop AC Adapters | 0 | |||
| ZVC6ONP48E8 | Bel Power Solutions | Desktop AC Adapters | 0 | |||
| V1D2GHT1-6KP48-100 | Carling Technologies | Rocker Switches V1D2GHT16KP48100 |
| 0 | ||
| DNP480-36 | Calex Mfg Co Inc | Power Supplies - DIN Rail Mount | 0 | |||
| DRA3P48B4R | Crydom Inc | Contactors - Solid State DIN MNT 3PH 480VAC 4A 120VAC CNT RN |
| 0 | ||
| BVAV-P488 | ABB Group | COND FTNG 45D PG48 NW48 IP68 BLK |
| 0 | ||
| BVWV-P488 | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| MMVP48K1NNT | Switchcraft Conxall | Patch Panels 1RU, 2X48 V-PBAY NON-NORM, NON-TERM |
| 0 | ||
| FYWCP48B025M050 | Panduit Corp | OM5 16-FIBER, (BASE 16) INDOOR SMALL DIAMETER TRUNK, PLENUM, MPO-24 MALE (16 FIBERS) APC WITH 1 M BREAKOUT TO MPO-4 MALE APC WITH 1 M BREAKOUT, POLARITY B, STANDARD IL, PULLING EYE END A, 50 M |
| 0 | ||
| RP-4800-NO.4-2-SP | TE Connectivity | Heat Shrink Tubing & Sleeves | 0 | |||
| P4-822111 | OTTO Engineering Inc | AUXILLARY ACTUATORS, MOMENTARY ACTION, TWO STEP CUSTOM PUSHBUTTON RoHS : Compliant |
| 0 | ||
| P4-833128 | OTTO Engineering Inc | AUXILLARY ACTUATORS, MOMENTARY ACTION, TWO STEP CUSTOM PUSHBUTTON RoHS : Compliant |
| 0 | ||
| RP-4800-NO.3-0-SP-CS7710 | TE Connectivity | Heat Shrink Tubing & Sleeves RP-4800-NO.3-0-SP-CS7710 | 0 | |||
 ComSIT USA | VPC3SQFP48 | PROFIC | AVAILABLE EU | 473 | ||
ComSIT USA | TSOP4836SI1 | Vishay Intertechnologies | IR RECEIVER MODULE FOR REMOTE CONTROL SYSTEMS Logic IC Output Optocoupler, 1-Channel RoHS : Compliant | 2,000 | ||
| TIP48G | onsemi | HIGH VOLTAGE NPN SILICON POWER TRANSISTOR Power Bipolar Transistor, 1A I(C), 300V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 1,600 | |||
| C9BR12P486X | Mitsumi Electric Co Ltd | Electronic Component RoHS : Compliant | 1,500 | |||
| SP485EENL | Exar Corporation | ENHANCED LOW POWER HALF-DUPLEX RS-485 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 RoHS : Compliant | 967 | |||
| HSMP4810TR1 | Hewlett Packard Co | SURFACE MOUNT RF PIN LOW DISTORTION ATTENUATOR DIODE Pin Diode, 100V V(BR), Silicon RoHS : Not Compliant | 965 | |||
15KP48A | Littelfuse Inc | 15000W AXIAL LEADED TVS DIODE Trans Voltage Suppressor Diode, 15000W, 48V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 800 | |||
| OP481GRU | Analog Devices Inc | ULTRALOW POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 2500uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 600 | |||
| ACPLP480000E | Broadcom Limited | Logic Output Opto-isolator 5kVrms Tri-State 6-SOIC Tube RoHS : Compliant | 560 | |||
| TSOP4836 | Vishay Intertechnologies | Logic Output Photo IC RoHS : Not Compliant | 360 | |||
| HSMP4820BLKG | Avago Technologies | SURFACE MOUNT RF PIN SWITCH AND LIMITER DIODE Pin Diode, 50V V(BR), Silicon RoHS : Compliant | 200 | |||
| HDSP4830 | Avago Technologies | 10-ELEMENT BAR GRAPH ARRAY Single Color LED Array, High Efficiency Red, 5.08mm RoHS : Compliant | 149 | |||
| HDSP4832CATI | Avago Technologies | 10-ELEMENT BAR GRAPH ARRAY Triple Color LED Array, High Efficiency Red/yellow/green, 5.08mm RoHS : Compliant | 120 | |||
| MCP4821EMS | mct | 12-BIT DAC WITH INTERNAL VREF AND SPI INTERFACE D/A Converter, 1 Func, Serial Input Loading, 4.5us Settling Time, PDSO8 RoHS : Compliant | 100 | |||
| SP485CSL | Sipex Corporation | LOW POWER HALF-DUPLEX RS-485 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8 RoHS : Not Compliant | 50 | |||
| SP483EENL | MaxLinear Inc | ENHANCED LOW EMI HALF-DUPLEX RS-485 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 RoHS : Compliant | 11 | |||
 Interstate Connecting Components | 280-046P4-8W8MENS | Glenair Inc | HIPER-D COMBO PIN W STD FLANGE RoHS : Compliant | 0 | ||
| 280-052P4-8P8MEGPB | Glenair Inc | RoHS : Compliant | 0 | |||
| IP48F300A1/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| IP48M00E0 | Amphenol Positronic | 0 | ||||
| IP48F00T0 | Amphenol Positronic | 0 | ||||
| K07R-DRFA5-6AP48 | Amphenol FCi | FLEXFAST DUO K07R SERIES PITCH | 0 | |||
| IP48F0HT0/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| RP-4800-NO.2-0-SP | TE Connectivity | RP-4800-NO.2-0-SP MIL-SPEC: M23053/5-116-0 RoHS : Compliant |
| 0 | ||
| 280-054P4-8P8MEGNA | Glenair Inc | STRAIGHT PC TAIL PIN LOW PROFILE RoHS : Compliant | 0 | |||
| 280-056P4-8P8MEGPA | Glenair Inc | HIPER-D 8#8 PCB RoHS : Compliant | 0 | |||
| 280-088P4-8P8MEGL | Glenair Inc | HIPER-D COMBO PIN W STD FLANGE | 0 | |||
| RP-4800-NO.4-0-STK | TE Connectivity | RP-4800-NO.4-0-STK RoHS : Compliant | 0 | |||
| RP-4800-NO.4-0-STK | TE Connectivity | M23053/5-118-0 RoHS : Compliant |
| 0 | ||
| RP-4800-NO.4-0-STK-CS34568 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCNB52242001 | 0 | |||
| 280-056P4-8P8MEGPA-429A | Glenair Inc | SRS 28 CONN E-NI | 0 | |||
 NexGen Digital | TSOP4838SB1 | Vishay Huntington | 10,990 | |||
| SP485CN-L | MaxLinear Inc | RoHS : Compliant | 185 | |||
| OD172SAP-48HB | Orion Fans | 12 | ||||
 PEI Genesis | TV06RW-25-20P-480 | Amphenol Corporation |
| 2 | ||
| 7149M29P48 | SOURIAU-SUNBANK |
| 0 | |||
| MSSP-4848 | ITT Interconnect Solutions |
| 0 | |||
| 7145M99P48 | SOURIAU-SUNBANK |
| 0 | |||
| NVNV-P488 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| BVEMV-P488 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| TP485 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| BVNV-P488 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| BGP-48 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| NVIZR-P488 | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| 7150M63P48 | SOURIAU-SUNBANK |
| 0 | |||
| NVNZ-P488S | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| IP48M400A1 | Amphenol Positronic |
| 0 | |||
| THAP488-2 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| GRP-48 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
 Powell Electronics | RP-4800-NO.2-0-SP | TE Connectivity | NB17364001 RoHS : Compliant |
| 840 | |
| TTMS-MP-4.8-4 | TE Connectivity | Connectors |
| 419 | ||
| RP-4800-NO.10-9-STK-CS8762 | TE Connectivity | Connectors |
| 132 | ||
| TTMS-MP-4.8-6 | TE Connectivity | Connectors |
| 132 | ||
| MS-000-000-000-4100-P48 | AirBorn a molex company | MS-000-000-000-4100-P48 |
| 70 | ||
| RP-4800-NO.7-0-SP | TE Connectivity | Connectors |
| 59 | ||
| EP4830 | Hammond Manufacturing | E-PANEL FITS 48 X 30 |
| 56 | ||
| RQ9P-48D12R | Adam Technologies Inc | DC/DC Conv 9W 48Vin Dual 12Vout RoHS : Compliant |
| 7 | ||
| 2CWBP48 | Hammond Manufacturing | S2MCS-48" ST. INNER PANEL-BASE RoHS : Compliant |
| 7 | ||
| ESP4836 | Hammond Manufacturing | E-S. PANEL FITS 48 X 36 RoHS : Compliant |
| 7 | ||
| AP4896-4848-G-C | Altech Corporation | Plastic Adaptor Plate |
| 3 | ||
| CLCBP48BK | Hammond Manufacturing | COLO BOTTOM PANEL 48" RoHS : Compliant |
| 2 | ||
| IP48F00T0/AA | Amphenol Positronic | Blind Mating, Mixed Density Connector RoHS : Compliant |
| 1 | ||
| 280-056P4-8P8MENPA | Glenair Inc | HIPER-D - RECTANGULAR CONN RoHS : Compliant |
| 1 | ||
| OD172SAP-48HB | Orion Fans | DC Fan 172mm 48VDC High Spd Ball |
| 1 | ||
 Chip 1 Exchange | LTC485CN8/SP485CS | INSTOCK | 20,000 | |||
| EFM32HG322F64G-C-QFP48 | Vishay Siliconix | INSTOCK | 17,460 | |||
| SP485CS / LTC485CN8 | INSTOCK | 13,649 | ||||
| TSOP4836SP1 | INSTOCK | 12,935 | ||||
| HT1621B-LQFP48 | Holtek Semiconductor Inc | INSTOCK | 12,559 | |||
| TSOP4836 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10,360 | |||
| P483/P1800EB-RP | INSTOCK | 5,415 | ||||
| NCP4894DMR2G | INSTOCK | 3,857 | ||||
| TSOP4840 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 2,193 | |||
| P484/P3403ACL-60-RP | LIT | INSTOCK | 700 | |||
| MCP4822-E/SN | Microchip Technology Inc | INSTOCK RoHS : Compliant | 500 | |||
| P484/P3403AC-60 | Teccor | INSTOCK | 289 | |||
| SP485CS | Exar Corporation | INSTOCK RoHS : Not Compliant | 50 | |||
| HDSP4830 | Avago Technologies | INSTOCK | 24 | |||
| RP-4800-NO.-1.0BLK | INSTOCK | 15 | ||||
 Avnet Abacus | 5KP48CA/B | YAGEO Corporation | (Alt: 5KP48CA/B) RoHS : Compliant | 0 | ||
| HC4HP48J | Panasonic Electronic Components | Electromechanical Relay 4PDT 5A 48VDC 26KOhm Through Hole (Alt: HC4HP48J) RoHS : Compliant | 0 | |||
| K4EBP481J | Panasonic Electronic Components | Electromechanical Relay 4PDT 2A 48VDC 3200Ohm Through Hole (Alt: K4EBP481J) RoHS : Compliant | 0 | |||
| HC4HP48ACJ | Panasonic Electronic Components | Electromechanical Relay 4PDT 5A 48VAC Through Hole (Alt: HC4HP48ACJ) RoHS : Compliant | 0 | |||
| AM1P-4803DZ | Aimtec | Module DCDC 2OUT 33V 015A 1W 5Pin DIP (Alt: AM1P-4803DZ) RoHS : Compliant | 0 | |||
| AM1P-4824SZ | Aimtec | Module DCDC 1OUT 24V 0042A 1W 4Pin DIP (Alt: AM1P-4824SZ) RoHS : Compliant | 0 | |||
| AM1P-4815DZ | Aimtec | Module DCDC 2OUT 15V 0034A 1W 5Pin DIP (Alt: AM1P-4815DZ) RoHS : Compliant | 0 | |||
| B82477P4821M | TDK Corporation | Power Inductor SMD 820 nH 20 11 A Shielded 28 A 125mm x 125mm x 85mm (Alt: B82477P4821M000) RoHS : Compliant | 0 | |||
| AM1P-482424DZ | Aimtec | Module DCDC 2OUT 24V24V 0021A0021A 1W 6Pin DIP (Alt: AM1P-482424DZ) RoHS : Compliant | 0 | |||
| AM1P-481515DZ | Aimtec | Module DCDC 2OUT 15V15V 0034A0034A 1W 6Pin DIP (Alt: AM1P-481515DZ) RoHS : Compliant | 0 | |||
| AM1P-480707DZ | Aimtec | Module DCDC 2OUT 72V72V 007A007A 1W 6Pin DIP (Alt: AM1P-480707DZ) RoHS : Compliant | 0 | |||
| AM1P-4818SH30Z | Aimtec | Module DCDC 1OUT 18V 0056A 1W 4Pin DIP (Alt: AM1P-4818SH30Z) RoHS : Compliant | 0 | |||
| AM1P-4807SH30Z | Aimtec | Module DCDC 1OUT 72V 014A 1W 4Pin DIP (Alt: AM1P-4807SH30Z) RoHS : Compliant | 0 | |||
| DCM300P480M500A40 | Vicor Power | Module DCDC 1OUT 48V 1042A 500W Through Hole 9Pin (Alt: DCM300P480M500A40) RoHS : Compliant | 0 | |||
| K07R-DRFA5-6AP48 | Amphenol Corporation | Flexfast duo pitch 18 a code (Alt: K07R-DRFA5-6AP48) RoHS : Compliant | 0 | |||
Avnet Asia | V23990-P482-A39-PM | MACOM | MCMV23990-P482-A39-PM IGBT MODULE, FLOW (Alt: V23990-P482-A39-PM) RoHS : Compliant |
| 500 | |
| V23990-P484-A39-PM | MACOM | MCMV23990-P484-A39-PM IGBT MODULE, FLOW (Alt: V23990-P484-A39-PM) RoHS : Compliant | 300 | |||
| NT1T00P48V4WBFW-KSC1 | ATP Electronics Inc | (Alt: NT1T00P48V4WBFW-KSC1) RoHS : Compliant | 0 | |||
| SP485EEN-L | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485EEN-L) RoHS : Compliant | 0 | |||
| V23990-P487-A39-PM | MACOM | MCMV23990-P487-A39-PM IGBT MODULE, FLOW (Alt: V23990-P487-A39-PM) RoHS : Compliant | 0 | |||
| SP485CN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485CN-L/TR) RoHS : Compliant | 0 | |||
| SP485CN-L | MaxLinear Inc | (Alt: SP485CN-L) RoHS : Compliant | 0 | |||
| V23990-P483-A39-PM | MACOM | MCMV23990-P483-A39-PM IGBT MODULE, FLOW (Alt: V23990-P483-A39-PM) RoHS : Compliant | 0 | |||
| SLG4BP48873V | Renesas Electronics Corporation | GPAK MIXED SIGNAL IC (Alt: SLG4BP48873V) RoHS : Compliant | 0 | |||
| SP485ECN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485ECN-L/TR) RoHS : Compliant | 0 | |||
| ELT-216SYGWB/E2/P48 | Everlight Electronics Co Ltd | EVLELT-216SYGWB/E2/P48 TOPVIEW LED (Alt: ELT-216SYGWB/E2/P48) RoHS : Compliant | 0 | |||
| NCP484201MTTW | onsemi | (Alt: NCP484201MTTW) RoHS : Compliant | 0 | |||
| SP483EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP483EEN-L/TR) RoHS : Compliant | 0 | |||
| TSOP4833 | Vishay Intertechnologies | (Alt: TSOP4833) RoHS : Compliant | 0 | |||
| SP485EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485EEN-L/TR) RoHS : Compliant | 0 | |||
 Avnet Silica | SP483EEN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 475 V to 525 V 8 Pins NSOIC (Alt: SP483EEN-L/TR) RoHS : Compliant | 47,500 | ||
| SP485EEN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 475 V to 525 V 8 Pins NSOIC (Alt: SP485EEN-L/TR) RoHS : Compliant | 5,000 | |||
| MRT65KP48CA | Microchip Technology Inc | Diode TVS Single BiDir 48V 65KW 2Pin Case 5A (Alt: MRT65KP48CA) RoHS : Compliant | 0 | |||
| MP4865AGBD-T | Monolithic Power Systems | 64CHANNEL HIGH VOLTAGE ANALOG SWITCHWITH OUTPUT BLEED RESISTORS AND 50V BIAS (Alt: MP4865AGBD-T) RoHS : Compliant | 0 | |||
| MPLAD15KP48CA | Microchip Technology Inc | (Alt: MPLAD15KP48CA) RoHS : Not Compliant | 0 | |||
| MCP4821T-E/MS | Microchip Technology Inc | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4821T-E/MS) RoHS : Compliant | 0 | |||
| MCP4811T-E/MS | Microchip Technology Inc | Digital to Analog Converter 1 Channel 10 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4811T-E/MS) RoHS : Compliant | 0 | |||
| MRT65KP48CAE3 | Microchip Technology Inc | (Alt: MRT65KP48CAE3) RoHS : Compliant | 0 | |||
| MCP48FEB12-E/UN | Microchip Technology Inc | (Alt: MCP48FEB12-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB11-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 10 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB11-E/UN) RoHS : Compliant | 0 | |||
| MPLAD6.5KP48CAE3 | Microchip Technology Inc | MSWMPLAD65KP48CAE3TR TRANSIENT VOLTAGE (Alt: MPLAD6.5KP48CAE3) RoHS : Compliant | 0 | |||
| MCP48FEB02T-E/UN | Microchip Technology Inc | Digital to Analog Converter 2 Channels 8 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FEB02T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FEB12T-E/UN | Microchip Technology Inc | DAC 2CH ResistorString 10Bit 10Pin MSOP TR (Alt: MCP48FEB12T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB22T-E/UN | Microchip Technology Inc | Digital to Analog Converter 2 Channels 12 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB22T-E/UN) RoHS : Compliant | 0 | |||
| 5KP48CA _AY _10001 | PanJit Semiconductor | (Alt: 5KP48CA_AY_10001) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | EFM32ZG222F32-QFP48 | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | |
| EFM32G222F128G-E-QFP48R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32HG222F64G-C-QFP48R | Silicon Laboratories Inc | ARM Cortex-M0+ 32-bit 25 MHz 64 kB MCU RoHS : Compliant |
| 0 | ||
| EFM32HG322F64G-C-QFP48 | Silicon Laboratories Inc | ARM Cortex-M0+ 32-bit 25 MHz 64 kB USB MCU RoHS : Compliant |
| 0 | ||
EFM32ZG222F32-QFP48T | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32G222F128-QFP48 | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32TG822F32-QFP48T | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| BS19A-P48/5.0L | Nipron Co |
| 0 | |||
| EFM32ZG222F8-B-QFP48R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32ZG222F16-B-QFP48R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32G222F128G-E-QFP48 | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| SX-AP-4800AN2 | Silex Technology America Inc | SX-AP-4800AN 802.11a/b/g/n Access Point with Enterprise Security, and PoE, US Power Supply |
| 0 | ||
| EFM32G222F64G-E-QFP48R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32G222F32G-E-QFP48 | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
| EFM32ZG222F4-B-QFP48R | Silicon Laboratories Inc | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | MP48 6STGBU | MPE-Garry GmbH | 112 | |||
 Component Electronics, Inc | TIP48 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 22,150 | |
| SP485ECN | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| P4802AA | Teccor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 129 | ||
| CSP48-161000 | IN STOCK SHIP TODAY |
| 109 | |||
| SP485CN-L/TR | MaxLinear Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | ||
| SP487CS | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 65 | ||
| TIP48 | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
| TIP48 | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| HSP48212VC-40 | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 24 | |||
| SP485CS | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 11 | |||
| EFM32ZG222F32-QFP48 | Silicon Laboratories Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
| SP488ECP | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| HDSP-4820 | Hewlett Packard Co | IN STOCK SHIP TODAY | 3 | |||
| AP-P484AM | Sony Batteries | IN STOCK SHIP TODAY |
| 2 | ||
| MCP4822-E/SN | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
 DB Roberts | 85-P-480-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin |
| 825 | |
| AFP48260A | Essentra Components | 48MM BASE 12-13 THREAD X 1.5 L | 0 | |||
| AFP48220A | Essentra Components | 48MM BASE 38-16 THREAD X 2.75 | 0 | |||
| AFP48200A | Essentra Components | 48MM BASE 38-16 THREAD X 2 LEN | 0 | |||
| AFP48270A | Essentra Components | 48MM BASE 12-13 THREAD X 2 LEN | 0 | |||
| AFP48170A | Essentra Components | 48MM BASE 38-16 THREAD X 1 LEN | 0 | |||
| AFP48280A | Essentra Components | 48MM BASE 12-13 THREAD X 2.75 | 0 | |||
| AFP48130A | Essentra Components | 48MM BASE 516-18 THREAD X 2 LE | 0 | |||
| AFP48110A | Essentra Components | 48MM BASE 516-18 THREAD X 1.5 | 0 | |||
| RP-481-013 | SHEREX FASTENING SO | 0 | ||||
| AFP48240A | Essentra Components | 48MM BASE 38-16 THREAD X 4 LEN | 0 | |||
| AFP48180A | Essentra Components | 48MM BASE 38-16 THREAD X 1.5 L | 0 | |||
| SP-48/S | Sugatsune Kogyo Co Ltd | 0 | ||||
 EBV Elektronik | TSOP4838 | Vishay Intertechnologies | IR Remote Receiver 38KHz 45m 3Pin (Alt: TSOP4838) RoHS : Compliant | 69,120 | ||
| HDSP-4850 | Broadcom Limited | (Alt: HDSP-4850) RoHS : Compliant | 2,640 | |||
| HDSP-4830 | Broadcom Limited | (Alt: HDSP-4830) RoHS : Compliant | 1,200 | |||
| MCP4822-E/SN | Microchip Technology Inc | Digital to Analog Converter 2 Channels 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4822-E/SN) RoHS : Compliant | 200 | |||
| HDSP-4840 | Broadcom Limited | (Alt: HDSP-4840) RoHS : Compliant | 120 | |||
| 5KP48AHE3/54 | Vishay Intertechnologies | (Alt: 5KP48AHE3/54) RoHS : Compliant | 0 | |||
| MPLAD15KP48CA | Microchip Technology Inc | (Alt: MPLAD15KP48CA) RoHS : Not Compliant | 0 | |||
| MCP4821T-E/MS | Microchip Technology Inc | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4821T-E/MS) RoHS : Compliant | 0 | |||
| ACPL-P483-000E | Broadcom Limited | (Alt: ACPL-P483-000E) RoHS : Compliant | 0 | |||
| ACPL-P484-560E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 6Pin SO TR (Alt: ACPL-P484-560E) RoHS : Compliant | 0 | |||
| MAPLAD30KP48CA | Microchip Technology Inc | (Alt: MAPLAD30KP48CA) RoHS : Not Compliant | 0 | |||
| MCP48FEB12-E/UN | Microchip Technology Inc | (Alt: MCP48FEB12-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB11-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 10 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB11-E/UN) RoHS : Compliant | 0 | |||
| HDSP-4830-JJ000 | Broadcom Limited | 10Element Bar Graph Array Red AllnGaP (Alt: HDSP-4830-JJ000) RoHS : Compliant | 0 | |||
| MPLAD6.5KP48CAE3 | Microchip Technology Inc | MSWMPLAD65KP48CAE3TR TRANSIENT VOLTAGE (Alt: MPLAD6.5KP48CAE3) RoHS : Compliant | 0 | |||
 Flip Electronics | NCP4810DR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 272,500 | |
| TIP48TU | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,714 | ||
| NTP4813NLG | onsemi | Stock, Ship Today |
| 11,050 | ||
| EFM32ZG222F32-B-QFP48 | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 3,408 | ||
| MC908AP48CFBER | NXP Semiconductors | Stock | 3,000 | |||
| TIP48 | onsemi | Stock RoHS : Compliant | 690 | |||
 Maritex | RK73H1ETTP4872F | KOA Speer Electronics Inc | Surface Mount Resistors; RK73H1ETTP4872F; KOA; 48.7 k?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 9,798 | |
| MCP4822-E/SN | Microchip Technology Inc | Analog-to-Digital Converters (ADC); MCP4822-E/SN; MICROCHIP TECHNOLOGY; 8; SPI, Serial; 5.5 V; 2 RoHS : Compliant |
| 834 | ||
| SP485EEN-L/TR | Exar Corporation | Integrated Circuit Interface Transceiver; 10Mbps; RS-485/RS-422, Half Duplex; 4.75-5.25V; -40+85 deg.C; SMD; SO8 RoHS : Compliant |
| 321 | ||
| HEP-480-24A | Mean Well | Power supply; 480W; 24V; 20A; 85-264VAC; 120-370VDC; IP65 RoHS : Compliant |
| 133 | ||
| VFD-250P-48 | Mean Well | Variable Frequency Drive; 250W; 20-55VDC; 0-34V RoHS : Compliant |
| 29 | ||
| VFD-150P-48 | Mean Well | Variable Frequency Drive;150W; 20-55V; 0-34V RoHS : Compliant |
| 29 | ||
| RK73H1ETTP4870F | KOA Speer Electronics Inc | Surface Mount Resistors; RK73H1ETTP4870F; KOA; 487 ?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 24 | ||
| HEP-480-48A | Mean Well | Power supply; 480W; 48V; 10A; 85-264VAC; 120-370VDC; IP65 RoHS : Compliant |
| 20 | ||
| VFD-350P-48 | Mean Well | Variable Frequency Drive; 350W; 20-55VDC; 0-34V RoHS : Compliant |
| 8 | ||
| SDR-480P-48 | Mean Well | Power Supply; DIN; 480W; 24V; 20A; 90-264VAC; 127-370VDC RoHS : Compliant |
| 3 | ||
| KCLP4801ACRSM | Khatod Optoelectronic Srl | Reflector for LED high power;ARENA; angle: 8 degrees ; Number of LEDs: 48; Dimensions: 144.98x144.98mm; Height: 30.50mm; material: PC; aluminium reflective coating; Fastening: screw; PART A |
| 1 | ||
 Master Electronics | PMP4825WP | Crydom Inc | Proportional Control SSR - Output Voltage: 345-530VAC - 25A - Supply Voltage: 8-30VDC - Overvoltage Protection RoHS : Compliant |
| 8 | |
| MPLAD15KP48CA | Microchip Technology Inc | Bi-Directional TVS RoHS : Compliant |
| 0 | ||
| C20A2P-489 | American Electrical Inc | The C20A2P-489 is a 2-pole 20A UL 489 rated DIN rail mounted hydraulic-magnetic circuit breaker. RoHS : Compliant |
| 0 | ||
| V1D2GHT1-6KP48-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| DRA3P48B4R | Crydom Inc | DRA3P Series DIN Rail Mount 3-Phase Solid State Contactor - Control Voltage 90-140 VAC - Max Input Current 8 mA - Output 48-510 VAC - Max Resistive Load Current 4.2 Amp - LED Input Status Indicator - 3 Controlled Legs RoHS : Compliant |
| 0 | ||
| BVAV-P488 | Thomas & Betts | COND FTNG 45D PG48 NW48 IP RoHS : Compliant |
| 0 | ||
| BVWV-P488 | Thomas & Betts | VW Connector 90 Degree Elbow - PG Thread for IP68 - Thread PG 48 - Fits to Conduit Size NW/Metric 48/50 - Color Black. RoHS : Compliant |
| 0 | ||
| MXLPLAD15KP48AE3 | Microchip Technology Inc | Uni-Directional TVS RoHS : Compliant |
| 0 | ||
| MXPLAD18KP48CAE3 | Microchip Technology Inc | Surface Mount 18 000 Watt TVS PLAD Vwm=48V Vbr=53.3V Id RoHS : Compliant |
| 0 | ||
| MPLAD18KP48CA | Microchip Technology Inc | Surface Mount 18 000 Watt TVS PLAD Vwm=48V Vbr=53.3V Id RoHS : Compliant |
| 0 | ||
| MPLAD30KP48A/TR | Microchip Technology Inc | Uni-Directional TVS RoHS : Compliant |
| 0 | ||
| RGC1P48AA62E | Carlo Gavazzi Holding AG | 1P-SSC I IN - PS 480V 63A 1200 RoHS : Compliant |
| 0 | ||
| VAL-US-SPP-480HLD/40/3R | Phoenix Contact | Surge protective device - four channel with remote indicator contact for 480 V AC high-leg DELTA. RoHS : Compliant |
| 0 | ||
| BVOV-P488 | Thomas & Betts | PMAFIX 90 Degree Black Flange with Seal - IP68 - Material Polyamide 6 - Conduit Size NW 48. RoHS : Compliant |
| 0 | ||
| ALND-P488 | Thomas & Betts | LAD Connector Straight - PG Thread - Thread 48 - Fits to Conduit Size NW/Metric 48/50 - Color Black. RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W01950/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-48 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | |
| PE3C0121/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to N male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our low loss SMA to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0121/WP-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0121/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to type N male cable has a maximum VSWR of 1.4:1. SMA plug to type N plug cable assembly PE3C0121/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0121/WP-48 can also be used in the other direction and will be a type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C6947/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male to TNC male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle TNC cable connection on the other. Our low loss SMA to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6947/WP-48 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6947/WP-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to right angle TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C6947/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6947/WP-48 can also be used in the other direction and will be a right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | ||
| PE3C0052LF/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax, LF Solder., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052LF/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052LF/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052LF/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C3055/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C3055/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3055/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C3055/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C1064/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-48 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 48 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder. |
| 140 | ||
| PE3C10354/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 48 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-48 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-48 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-48 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 13 | ||
| PE3C0031/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0031/WP-48 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0031/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C0031/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0031/WP-48 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3987/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Male Right Angle Cable 48 Inch Length Using RG316-DS Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly SMA male right angle to SMA male right angle cable 48 inch length using RG316-DS coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 48 inch length using RG316-DS coax with heatshrink and 180 deg. clock, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3987/SP-48 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3987/SP-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 48 inch length using RG316-DS coax with heatshrink and 180 deg. clock, LF solder. |
| 0 | ||
| PE3C1382/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 TNC Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1382/WP-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1382/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1382/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2483/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Female (Jack) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N female (jack) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a female gender on end 1 and a male on end 2. PE3C2483/WP-48 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2483/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N female to TNC male cable has a maximum VSWR of 1.4:1. Type N jack to TNC plug cable assembly PE3C2483/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2483/WP-48 can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01954/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male right angle to TNC male low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W01954/WP-48 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01954/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W01954/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01954/WP-48 can also be used in the other direction and will be a TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01732/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to MMCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle TNC to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W01732/SP-48 can also be known as a low loss right angle TNC plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01732/SP-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. TNC plug to MMCX male cable assembly PE3W01732/SP-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01732/SP-48 can also be used in the other direction and will be a right angle MMCX plug to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0033/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0033/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0033/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0033/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0689/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax., Radio frequency assembly SMA male to N male low loss cable 48 inch length using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 48 inch length using PE-P142LL coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0689/SP-48 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0689/SP-48 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0689/SP-48 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 48 inch length using PE-P142LL coax. |
| 0 | ||
 Venkel Ltd. | HPTF0603-QP-48R7FT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;48.7R;�1% RoHS : Compliant | 0 | ||
| HPTF1206-TP-4870CT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;487R;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UP-4870FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;487R;�1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4811DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.81K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4871BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.87K;�0.1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-4870BT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;487R;�0.1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-4871UT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;4.87K;�0.01% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-4810DT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;481R;�0.5% RoHS : Compliant | 0 | |||
| CRG0402-P-4873FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;487K ;�1% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4871DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;4.87K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-48R1BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;48.1R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-4810AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;481R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-48R7CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;48.7R;�0.25% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-4812BT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;48.1K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-TP-4870BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;487R;�0.1% RoHS : Compliant | 0 | |||
 Vyrian | OP484AY/QMLR | Analog Devices Inc | Operational Amplifier, 4 Func, 500uV Offset-Max, CDIP14 | 11,490 | ||
| OP482GSZ-REEL | Analog Devices Inc | Operational Amplifier, 4 Func, 6000uV Offset-Max, JFET, PDSO14 RoHS : Compliant | 11,322 | |||
| OP4840002C | Analog Devices Inc | 10,048 | ||||
| OP481GRU | Analog Devices Inc | Operational Amplifier, 4 Func, 2500uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 9,470 | |||
| IP4855CX25/P,135 | NXP Semiconductors | Interface Circuit, PBGA25 RoHS : Compliant | 9,014 | |||
| P4800MEL | Littelfuse Inc | Thyristor Surge Protector, 600V V(BO) Max, TO-218 RoHS : Compliant | 7,861 | |||
| IP4853CX24 | Nexperia | CMOS to ECL Translator, 1 Func, True Output, PBGA24 | 7,697 | |||
DLP480REAAFXG | Texas Instruments | Consumer Circuit, CBGA257 RoHS : Compliant | 7,665 | |||
| MPLAD15KP48CA | Microchip Technology Inc | Trans Voltage Suppressor Diode, 15000W, 48V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Not Compliant | 6,866 | |||
| OP482ACBZ-RL | Analog Devices Inc | Operational Amplifier, 4 Func, 6000uV Offset-Max, PBGA14 RoHS : Compliant | 6,387 | |||
| RT100KP48CA | Microchip Technology Inc | Transient Suppressor RoHS : Not Compliant | 6,349 | |||
| P4802ABL61 | Littelfuse Inc | Silicon Surge Protector, 290V V(BO) Max, 60A RoHS : Compliant | 5,646 | |||
| HDSP4832CATG | Broadcom Limited | 4,667 | ||||
| ACPL-P483-000E | Broadcom Limited | RoHS : Compliant | 3,246 | |||
| ZWS150BP48/A | TDK Corporation | AC-DC Regulated Power Supply Module, 153.6W RoHS : Compliant | 734 | |||
 Win Source Electronics | HT1621B-LQFP48 | Holtek Semiconductor Inc |
| 45,380 | ||
| EFM32HG222F64G-C-QFP48R | Silicon Laboratories Inc | IC MCU 32BIT 64KB FLASH 48TQFP / ARM® Cortex®-M0+ series Microcontroller IC 32-Bit Single-Core 25MHz 64KB (64K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 42,000 | ||
| SP481EEN | Sipex Corporation | Enhanced Low Power Half-Duplex RS-485 Transceivers RoHS : Not Compliant |
| 39,000 | ||
AP4800BGM-HF | Advanced Power Electronics Corp | Simple Drive Requirement, Low On-resistance |
| 26,393 | ||
| MCP4822-E/SN | Microchip Technology Inc | IC DAC 12BIT DUAL W/SPI 8SOIC RoHS : Compliant |
| 25,069 | ||
| OP482GS-REEL7 | Analog Devices Inc | IC OPAMP JFET 4 CIRCUIT 14SOIC RoHS : Not Compliant |
| 13,000 | ||
| EFM32G222F128G-E-QFP48R | Silicon Laboratories Inc | IC MCU 32BIT 128KB FLASH 48TQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 32MHz 128KB (128K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 11,863 | ||
| HSMP-4890-TR1G | Broadcom Limited | DIODE PIN SW LOW INDUCT SOT-23 RoHS : Compliant |
| 6,941 | ||
| EFM8UB20F64G-B-QFP48 | Silicon Laboratories Inc | IC MCU 8BIT 64KB FLASH 48TQFP RoHS : Compliant |
| 6,470 | ||
| MCP4801-E/MS | Microchip Technology Inc | IC DAC 8BIT V-OUT 8MSOP / 8 Bit Digital to Analog Converter 1 8-MSOP RoHS : Compliant |
| 6,191 | ||
| EFM32TG222F32-D-QFP48R | Silicon Laboratories Inc | IC MCU 32BIT 32KB FLASH 48TQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 32MHz 32KB (32K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 5,050 | ||
| SP485ECN | Sipex Corporation | Enhanced Low Power Half-Duplex RS-485 Transceivers RoHS : Not Compliant |
| 4,990 | ||
| OP482GSZ-REEL | Analog Devices Inc | IC OPAMP JFET 4 CIRCUIT 14SOIC / J-FET Amplifier 4 Circuit 14-SOIC RoHS : Compliant |
| 1,880 | ||
| IP4856CX25/CZ | Nexperia | IC INTFACE SPECIALIZED 25WLCSP RoHS : Compliant |
| 1,259 | ||
| OP484ESZ | Analog Devices Inc | IC OPAMP GP 4.25MHZ RRO 14SOIC RoHS : Compliant |
| 93 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand