 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S18TBJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | MLG1005S18NJT000 | TDK Corporation | - Tape and Reel (Alt: MLG1005S18NJT000) RoHS : Compliant |
| 30,000 | |
| STRVS185X02B | STMicroelectronics | Diode TVS Single Uni-Dir 128V 2-Pin DO-214AA T/R - Tape and Reel (Alt: STRVS185X02B) RoHS : Compliant |
| 25,000 | ||
LD1117AS18TR | STMicroelectronics | - Tape and Reel (Alt: LD1117AS18TR) RoHS : Compliant | 12,500 | |||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead, 0402 [1005 Metric], 1.8 kohm, 200 mA, MMZ-E Series, 1.5 ohm, ? 25% - Tape and Reel (Alt: MMZ1005S182ET000) RoHS : Compliant |
| 10,000 | ||
| MPZ1608S181ATDH5 | TDK Corporation | - Tape and Reel (Alt: MPZ1608S181ATDH5) RoHS : Compliant |
| 8,000 | ||
PTS181230V020 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 30 VDC, 200 mA, 400 mA, 0.02 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant |
| 2,000 | ||
| VGAS181234U770DP | Kyocera AVX Components | - Tape and Reel (Alt: VGAS181234U770DP) RoHS : Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant |
| 1,000 | ||
| RWR80S1821FRS70 | Vishay Intertechnologies | Through Hole Resistor, 1.82 kohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S1821FRS70) RoHS : Not Compliant |
| 1,000 | ||
| ECS-18-13-1X | ECS International Inc | - Bulk (Alt: ECS-18-13-1X) RoHS : Compliant |
| 491 | ||
MCP23S18-E/SO | Microchip Technology Inc | I/O Expander 28-Pin SOIC W - Rail/Tube (Alt: MCP23S18-E/SO) RoHS : Compliant |
| 189 | ||
| ECS-184-18-4X | ECS International Inc | - Bulk (Alt: ECS-184-18-4X) RoHS : Compliant |
| 100 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| A8504952S18W | Amphenol Corporation | - Bulk (Alt: A8504952S18W) RoHS : Not Compliant |
| 1 | ||
 Newark | LD1117S18CTR | STMicroelectronics | Ldo Vlt Reg, 1.8V, 0.95A, Sot-223-3; |Stmicroelectronics LD1117S18CTR RoHS : Compliant |
| 4,494 | |
| MTSW-104-07-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTSW-104-07-G-S-180 RoHS : Compliant |
| 1,831 | ||
| AS-18.432-20-SMD-TR | Raltron Electronics Corporation | Crystal, 18.432Mhz, 20Pf, 12Mm X 4.8Mm; |Raltron AS-18.432-20-SMD-TR RoHS : Compliant |
| 1,745 | ||
| AS-18.432-20-SMD-TR | Raltron Electronics Corporation | Crystal, 18.432Mhz, 20Pf, 12Mm X 4.8Mm; |Raltron AS-18.432-20-SMD-TR RoHS : Compliant |
| 1,745 | ||
| MTLW-104-07-S-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTLW-104-07-S-S-185 RoHS : Compliant |
| 1,344 | ||
| MTLW-103-05-SM-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 3Pos; |Samtec, Inc. MTLW-103-05-SM-S-185 RoHS : Compliant |
| 1,261 | ||
| MTLW-107-05-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 7Pos; |Samtec, Inc. MTLW-107-05-G-S-180 RoHS : Compliant |
| 1,048 | ||
| MTMM-105-04-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 5Pos; |Samtec, Inc. MTMM-105-04-G-S-180 RoHS : Compliant |
| 1,039 | ||
| MTSW-110-11-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTSW-110-11-G-S-180 RoHS : Compliant |
| 888 | ||
| MTLW-105-07-T-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 5Pos; |Samtec, Inc. MTLW-105-07-T-S-185 RoHS : Compliant |
| 828 | ||
| MTMM-108-02-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-108-02-T-S-180 RoHS : Compliant |
| 660 | ||
| MTLW-140-05-T-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 40Pos; |Samtec, Inc. MTLW-140-05-T-S-180 RoHS : Compliant |
| 500 | ||
| PTS18128V200 | Eaton Bussmann | Pptc Resettable Fuse, 2A, 8Vdc, Smd; |Eaton Bussmann PTS18128V200 RoHS : Compliant |
| 11 | ||
| PTS18128V200 | Eaton Bussmann | Pptc Resettable Fuse, 2A, 8Vdc, Smd; |Eaton Bussmann PTS18128V200 RoHS : Compliant |
| 11 | ||
| QS18VP6RQ5 | Banner Engineering Corp | Sensor, Photo, 20M, Pnp; Product Range:Qs18 Series; Output Current:100Ma; Sensing Range Max:20M; Sensor Output Type:Pnp; Supply Voltage Dc Max:30V; Supply Voltage Dc Min:10V Rohs Compliant: Yes |Banner Engineering QS18VP6RQ5 RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | DS1830AU+T&R | Analog Devices Inc | Reset Sequence Pushbutton RoHS : Compliant |
| 27,000 | |
| LTC2378HMS-18#PBF | Analog Devices Inc | 18-B, 1Msps, L Pwr SAR ADC w/ RoHS : Compliant |
| 7,368 | ||
| DS1831BS+ | Analog Devices Inc | Multisupply MicroMonitor™ RoHS : Compliant |
| 5,320 | ||
| LTC2364CMS-18#PBF | Analog Devices Inc | 18-B, 250ksps, Pseudo-Diff Uni RoHS : Compliant |
| 4,921 | ||
| ADBMS1816CSWZ | Analog Devices Inc | 16 Channel Multicell Batt Stac |
| 1,569 | ||
| DS1803Z-010+ | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 1,454 | ||
| LTC2337IMS-18#PBF | Analog Devices Inc | 18-B, 500ksps, ±10.24V True Bi RoHS : Compliant |
| 111 | ||
| LTC2379IMS-18#PBF | Analog Devices Inc | 18-B, 1.6Msps, L Pwr SAR ADC w RoHS : Compliant |
| 1 | ||
| LTC2338HMS-18#TRPBF | Analog Devices Inc | 18-B, 1Msps, ±10.24V True Bipo RoHS : Compliant |
| 0 | ||
| LTC2326CMS-18#TRPBF | Analog Devices Inc | 18-B, 250ksps, ±10.24V True Bi RoHS : Compliant |
| 0 | ||
| LTC2328IMS-18#TRPBF | Analog Devices Inc | 18-B, 1Msps, ±10.24V True Bipo RoHS : Compliant |
| 0 | ||
| LTC2379CMS-18#TRPBF | Analog Devices Inc | 18-B, 1.6Msps, L Pwr SAR ADC w RoHS : Compliant |
| 0 | ||
| ADBMS1816CSWZ-R7 | Analog Devices Inc | 16 Channel Multicell Batt Stac | 0 | |||
| LTC2369HMS-18#TRPBF | Analog Devices Inc | 18-B, 1.6Msps, Pseudo- Diff Un RoHS : Compliant |
| 0 | ||
| DS1816R-10-U+ | Analog Devices Inc | 3.3V EconoReset with Open Drai RoHS : Compliant | 0 | |||
 RS | SM16M1S18 | SOURIAU-SUNBANK | MALE STAMPED AND FORMED CRIMP CONTACT, SIZE #16, ON A REEL, GOLD AND TIN PLATIN |
| 3,000 | |
| S18AW3FF50 (30327) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 50MM, 20-250VAC, SSAC, CABLE, S18 |
| 28 | ||
| S18SP6LPQ (33450) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, POLARIZED RETRO, 2M, 10-30VDC, PNP, QD, S18 |
| 17 | ||
| QS18VP6D (61654) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 450MM, 10-30VDC, PNP, CABLE, QS18 |
| 15 | ||
| QS18APH6FF150Q8 | Banner Engineering Corp | FIXED FIELD PHOTOELECTRIC SENSOR, BGS, 150MM, 10-30 VDC, M12, QS18 SERIES |
| 10 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| CPE14-M1BH-3GLS-1/8 (196930) | Festo | VALVE, 3/2 CLOSED AIR SPR, G 1/8, 24VDC, EXT PILOT, -.9 TO 10 BAR, 900L/MIN |
| 4 | ||
| S18AW3DQ (29828) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 100MM, 20-250VAC, SSAC, QD, S18 |
| 2 | ||
| QS186LE212Q8 (74317) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, LASER CLASS 2, 15M, 10-30VDC, QD, QS18 |
| 2 | ||
| VPPM-12L-L-1-G12-0L10H-LK-S1 (8024266) | Festo | PROPORTIONAL-PRESSURE REGULATOR, 3 WAY, G1/2, 1-10 BAR REG RANGE, 7000L/MIN |
| 2 | ||
| CFES18BUU | IKO International Inc | CAM FOLLOWER, FLAT,18MM ROLLER DIAMETER,18MM STUD DIAMETER,36.5MM STUD LENGTH, |
| 1 | ||
| HWS1800T-24 (HWS1800T24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,75A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES |
| 1 | ||
| ACS180-04S-03A7-2 (3AXD50000857395) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 0.75HP, FRAME R0, ACS311, ACS310 SERIES |
| 1 | ||
| 01005-1218 (XH25D-SS-18000-T5-ABZC-28V/V-EM18) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 5-28VDC, 3/8" SHAFT, 18000 CYCLES/TURN, 2 CHANNEL |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 10,900 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 5,000 | ||
| MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,290 | ||
MCP23S18T-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 1,035 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
MCP23S18-E/SP | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2036-09-30 RoHS : Compliant |
| 420 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: |
| 283 | ||
| MCP23S18-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 118 | ||
| MCP23S18-E/SO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2036-09-30 RoHS : Compliant |
| 107 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 58 | ||
 Rochester Electronics | MRF8S18120HSR3 | NXP Semiconductors | RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 2,750 | |
| BLF6G20LS-180RN,11 | NXP Semiconductors | Power LDMOS transistor, SOT502 (LDMOST) RoHS : Compliant |
| 10 | ||
| 5B37-S-18-FC | Analog Devices Inc | Analog Circuit, 1 Func, Hybrid RoHS : Not Compliant |
| 16 | ||
AM27S181/BKA | AMD | OTP ROM, 128KX8, 150ns, Bipolar, CDFP24 RoHS : Not Compliant |
| 1,602 | ||
FLS1800XS | Fairchild Semiconductor Corporation | 260W - Half-Bridge LLC Resonant Control IC for Lighting RoHS : Compliant |
| 1,926 | ||
| MRF8S18120HSR3 | Freescale Semiconductor | RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 1,442 | ||
LTC2337IMS-18#PBF | Linear Technology | IC ADC 1 CONV 18Bits SAR SPI 16-SOP Tube RoHS : Compliant |
| 22 | ||
| LTC2379IMS-18#PBF | Linear Technology | IC ADC 1 CONV 18Bits SAR SPI 16-SOP Tube RoHS : Compliant |
| 57 | ||
| LM3S1850-IQC50-A2 | Luminary Micro | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQFP100 |
| 120 | ||
| DS1804U-100/TR | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 4,106 | ||
DS1817-20+ | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS RoHS : Compliant |
| 1,435 | ||
DS1830A | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.06V, PDIP8 RoHS : Not Compliant |
| 23,047 | ||
| LP3966ES-1.8 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 1.8V, 0.7V Dropout, CMOS, PSSO5 RoHS : Not Compliant |
| 4,390 | ||
| 25S18/BEA | Rochester Electronics LLC | 25S18 - Flip-Flop, D-Type, 4-Bit, With Standard And 3-State Outputs - Dual marked (5962-8671501EA) RoHS : Not Compliant |
| 950 | ||
| LD1117S18CTR | STMicroelectronics | IC VOLT REG Fixed 1 REG 1.8V 800mA SOT223 T/R RoHS : Compliant |
| 0 | ||
 Sager | MTLW-104-07-S-S-185 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 1,344 | |
| MTLW-103-05-SM-S-185 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 1,261 | ||
| MTLW-107-05-G-S-180 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 1,048 | ||
| MTMM-105-04-G-S-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 1,039 | ||
| MTLW-105-07-T-S-185 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 828 | ||
| MTMM-108-02-T-S-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 660 | ||
| MTLW-140-05-T-S-180 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 500 | ||
| MMSD-12-28C-S-18.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MPAS-181-ZLGT-15 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| PTS18128V200 | Eaton Bussmann | Resettable Fuses - PPTC PPTC 1812 8V 2.0A SMD |
| 0 | ||
| MTLW-103-07-T-S-188-02 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-114-05-L-S-185 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-117-07-S-S-185 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-110-04-G-S-184 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-115-07-G-S-182 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 Coilcraft Direct | 0805CS-181XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 47,947 | |
| 0805LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 28,438 | ||
| 1008CS-180XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 18,074 | ||
| 0603LS-183XGRC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS, Halogen Free R RoHS : Compliant |
| 14,319 | ||
| 0603LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free R RoHS : Compliant |
| 10,025 | ||
| 1008CS-181XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 7,482 | ||
| 0805CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 7,294 | ||
| 1008LS-182XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 7,063 | ||
| 0302CS-18NXJRW | Coilcraft Inc | RF inductor, ceramic core, 5/10% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 4,426 | ||
| 0805CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 3,603 | ||
| 0805CS-182XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,864 | ||
| 1206CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 2,385 | ||
| 0805CS-182XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,600 | ||
| 1008CS-182XFEC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS Halogen Free RoHS : Compliant | 0 | |||
| 0805HS-181TFRC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS RoHS : Compliant | 0 | |||
 TME | 1SS181(TE85L,F) | Toshiba America Electronic Components | Diode: switching; 1.2V RoHS : Compliant |
| 24,066 | |
| CAS18C391JAGFC | YAGEO Corporation | Capacitor: ceramic; 390pF; 250VAC; C0G (NP0); ±5%; SMD; 1812 |
| 1,000 | ||
| 62S18-H9-020CH | Grayhill Inc | Encoder: incremental; 20imp/revol; 5V RoHS : Compliant |
| 16 | ||
| BLS18 | Klein Tools Inc | Wrench-set; hex key,spherical; long; 18pcs. |
| 3 | ||
| BS 18 L BL Q | Metabo Power Tools | Drill/driver; drilling,screwdriving; 0÷500rpm,0÷1700rpm |
| 1 | ||
| 1150BM-HS/180 | Beta Electric | Pliers: universal; for gripping and cutting; 180mm |
| 0 | ||
| BAS281-GS18 | Vishay Intertechnologies | Diode: Schottky switching; QuadroMELF,SOD80; SMD; 40V; 30mA RoHS : Compliant |
| 0 | ||
CMS-181325-078L100 | Same Sky | Loudspeaker; miniature; 700mW; 8Ω; 18x13x2.5mm; 10kHz; PEEK RoHS : Compliant |
| 0 | ||
| CMS-181325-078L100B | Same Sky | Loudspeaker; miniature; 700mW; 8Ω; 18x13x2.5mm; 10kHz; PEEK RoHS : Compliant |
| 0 | ||
| CMS1-8-R | Eaton Electronics | Inductor: common mode; SMD; 51.2uH; 2.2A; 9.4x7.2x2.6mm; 26mΩ |
| 0 | ||
| E57PS-18UNC8-C2 | Eaton Corporation | Sensor: inductive; OUT: NPN / NC; 0÷8mm; 10÷48VDC; M18; 2m; IP67 RoHS : Compliant |
| 0 | ||
| E57PS-18UNN8-Q | Eaton Corporation | Sensor: inductive; OUT: NPN / NO; 0÷8mm; 10÷48VDC; M18; IP67; 300mA RoHS : Compliant |
| 0 | ||
| EMH350PS18 | XP Power | Power supply: switching; open; 354W; 80÷275VAC; OUT: 1; 18VDC; 19.5A RoHS : Compliant |
| 0 | ||
| BZT55B2V7-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 2.7V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
| BZT55C8V2-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 6.2V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
 ComSIT USA | 600S180FT250XT | AMERICAN TECHNICAL CERAMICS/AVX/KYOCERA AVX | AVAILABLE EU | 1,496 | ||
| S1812R152K | API Delevan | AVAILABLE EU | 317 | |||
| DS1818R20TR | Analog Devices Inc | AVAILABLE EU | 1,944 | |||
| DS1845E010+TR | Maxim Integrated Products | AVAILABLE EU | 2,017 | |||
| DS1825U+TR | DALLAS SEMI/MAXIM INTEGRATED/ANALOG DEVICES | AVAILABLE EU | 25 | |||
| 0603CS18NXJLW | Coilcraft Inc | AVAILABLE EU | 3,932 | |||
ComSIT USA | BAV102GS18 | Vishay Intertechnologies | HIGH VOLTAGE, SMALL SIGNAL SWITCHING DIODE Rectifier Diode, 1 Phase, 1 Element, 0.25A, 200V V(RRM), Silicon, DO-213AA RoHS : Compliant | 85,895 | ||
| LL4148GS18 | Vishay Intertechnologies | Small Signal Fast Switching Diode Rectifier Diode, 1 Phase, 1 Element, 0.15A, 100V V(RRM), Silicon RoHS : Compliant | 68,040 | |||
| LL101AGS18 | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 1 Element, 0.03A, 60V V(RRM), Silicon, DO-213AA RoHS : Compliant | 20,000 | |||
| BZT55C33GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 33V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 19,540 | |||
| ZMY51GS18 | Vishay Semiconductors | ZENER DIODE Zener Diode, 51V V(Z), 5.88%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 18,440 | |||
| BZT52C15VGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 15V V(Z), 6.12%, 0.41W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| DS1817R5+ | Maxim Integrated Products | Supervisory Circuit 3.06V SOT-23-3 T/R RoHS : Compliant | 6,650 | |||
| AAT3221IJS18T1 | Skyworks Solutions Inc | IC VOLT REG Fixed 1 REG 1.8V 150mA 8-SOJ T/R RoHS : Compliant | 5,985 | |||
| S18BPHDSSLFSN | JST Manufacturing | 2.0 MM PITCH SHROUDED HEADER CONNECTOR Board Connector, 18 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal RoHS : Compliant | 3,750 | |||
| DS1859B020TR | Dallas Semiconductor | DUAL, TEMPERATURE-CONTROLLED RESISTOR WITH INTERNALLY CALIBRATED MONITOR Digital Potentiometer, 2 Func, 20000ohm, 2-wire Serial Control Interface, 256 Positions, PBGA16 RoHS : Compliant | 2,435 | |||
| VSVS185BG12D | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 1,977 | |||
| 1008CS182XJLC | Coilcraft Inc | IND FIXED Wirewound Ceramic 1.8uH 300mA 2.6 OHM (Max) �5% 1008 T/R RoHS : Not Compliant | 680 | |||
| NP80N04MHES18AY | NEC Electronics Group | N-CHANNEL POWER MOS FET SWITCHING Power Field-Effect Transistor, 80A I(D), 40V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Not Compliant | 600 | |||
| LM3S1816IQR50C5 | Texas Instruments | STELLARIS MICROCONTROLLER Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 50MHz, CMOS, PQFP64 RoHS : Compliant | 100 | |||
| DS18B20Z+ | Maxim Integrated Products | Temperature Sensor ICs 1-Wire� Digital, Local 8-SOIC Tube RoHS : Compliant | 38 | |||
 Interstate Connecting Components | BACC45FS18-31S6H | Cinch Connectivity Solutions | BACC PLUG 31#20 SKT | 0 | ||
| BACS18AY6 | Amphenol PCD | BOEING SPRING COIL | 0 | |||
| 447SS183ANF1003 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 447SS183NF1006 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 222K163-25/225-CS-1858-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 280-087S2S15MES-186M | Glenair Inc | 0 | ||||
| SM16M1S18 | SOURIAU-SUNBANK | Size 16 Selective plated CONTACT 16 AWG |
| 0 | ||
| SM16M1S18 | SOURIAU-SUNBANK | Y8235 | 0 | |||
| VG95328S18-32SN | Glenair Inc | 0 | ||||
| A85049144S18X106 | Amphenol PCD | M85049144S18X10-6 | 0 | |||
| A85049146S18X03 | Amphenol PCD | M85049146S18X03 | 0 | |||
| A8504931S18X | Amphenol PCD | M8504931S18X | 0 | |||
| 85333KS1831PN | SOURIAU-SUNBANK | J6203 | 0 | |||
| 85333RS1831SN | SOURIAU-SUNBANK | J6205 | 0 | |||
| 85334RS1831PN48 | SOURIAU-SUNBANK | 0 | ||||
 NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| RMC1/16S-181JTH99 | Kamaya Inc | 6,634 | ||||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 5,167 | |||
| 1008CS-180KXBC | Coilcraft Inc | 1,991 | ||||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| 1008CS-182XJBC | Coilcraft Inc | RoHS : Not Compliant | 814 | |||
| ECS-184-S-20A-TR | ECS International Inc | RoHS : Compliant | 524 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| LP3873ES-1.8/NOPB | National Semiconductor Corporation | RoHS : Compliant | 49 | |||
| NAS186DD3C6.B | 40 | |||||
DS1818R-5-U+ | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
 PEI Genesis | 85333KS1831PNL | SOURIAU-SUNBANK |
| 24 | ||
| 09A1028S18CN | SOURIAU-SUNBANK |
| 0 | |||
| BACC45FS18-31S6H | Cinch Connectivity Solutions |
| 0 | |||
| AE83398S18317 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| SM16M1S18 | SOURIAU-SUNBANK |
| 0 | |||
| 85337RS1814PN | SOURIAU-SUNBANK |
| 0 | |||
| 8D519S18PD | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D719S18PB251 | SOURIAU-SUNBANK |
| 0 | |||
| AE83398S18316 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| 06A1001S1808N3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1008S18N | SOURIAU-SUNBANK |
| 0 | |||
| 06A1012S1805P2 | SOURIAU-SUNBANK |
| 0 | |||
| 03A1001S1808CN2-114 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-07-1.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1812-2516-12 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | CBW57-HS-18A | 122 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
 Chip 1 Exchange | ES07B-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 73,740 | ||
| ZMY33-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 70,000 | |||
| ZMY36-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 10,000 | |||
| MLK1005S18NJT000 | INSTOCK | 10,000 | ||||
| MMSZ4689-V-GS18 | INSTOCK | 7,290 | ||||
| ZMY36-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 5,000 | |||
| 1008HS-18IT JBC | INSTOCK | 1,600 | ||||
| 103318050 1/2-S 180R | INSTOCK | 800 | ||||
DS1832S+T&R | Maxim Integrated Products | INSTOCK RoHS : Compliant | 511 | |||
| DS1815R-10-TR | INSTOCK | 500 | ||||
| 0805CS-180XGLC | INSTOCK | 433 | ||||
| MLK1005S18NJT000 | TDK Corporation | INSTOCK RoHS : Compliant | 250 | |||
| MKS1854-6-0-404 | INSTOCK | 50 | ||||
| CS18LV00645PCR70 | Chiplus Semiconductor Corp | INSTOCK RoHS : Compliant | 8 | |||
| DS18B20Z+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 6 | |||
 Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18 | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| PTS18128V200 | Eaton Corporation | SMD Resettable Fuse PPTC 1812 4532 Metric PTS1812 8 VDC 2 A 35 A 2 s - Tape and Reel (Alt: PTS18128V200) RoHS : Compliant | 0 | |||
| BKP1608HS181-T | TAIYO YUDEN | - Tape and Reel (Alt: LFBKP1608HS181-T) RoHS : Compliant | 0 | |||
| CAS18C100FAGGC | KEMET Corporation | Ceramic Suppression Capacitor 10 pF 1 X2 250 VAC 1812 4532 Metric Surface Mount 35 mm (Alt: CAS18C100FAGGC) RoHS : Compliant | 0 | |||
| CAS18C151GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 150 pF 2 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C151GAGFC) RoHS : Compliant | 0 | |||
| CAS18C270GAGFC | KEMET Corporation | Ceramic Suppression Capacitor 27 pF 2 X1 Y2 250 VAC 250 VAC 1812 4532 Metric (Alt: CAS18C270GAGFC) RoHS : Compliant | 0 | |||
| VGAS181242U900TP | Kyocera AVX Components | (Alt: VGAS181242U900TP) RoHS : Compliant | 0 | |||
ASPI-8040S-180M-T | Abracon Corporation | Power Inductor SMD 18 uH 20 24 A Shielded 27 A 8mm x 8mm x 42mm - Tape and Reel (Alt: ASPI-8040S-180M-T) RoHS : Compliant | 0 | |||
C0603S183K5RACAUTO | KEMET Corporation | SMD Multilayer Ceramic Capacitor 0018 uF 50 V 0603 1608 Metric 10 X7R FECAP Series - Tape and Reel (Alt: C0603S183K5RACAUTO) RoHS : Compliant | 0 | |||
Avnet Asia | PTVS18VS1UR,115 | Nexperia | Diode TVS Single Uni-Dir 18V 400W 2-Pin SOD-123W T/R (Alt: PTVS18VS1UR,115) RoHS : Compliant |
| 9,000 | |
| EYGS182307 | Panasonic Electronic Components | (Alt: EYGS182307) RoHS : Compliant | 50 | |||
| PTS18128V200 | Eaton Corporation | (Alt: PTS18128V200) RoHS : Compliant | 0 | |||
| LL46-GS18 | Vishay Intertechnologies | SCHOTTKY DIODE SOD80 MINIMELF (Alt: LL46-GS18) RoHS : Compliant | 0 | |||
| PTVS18VP1UTP-QX | Nexperia | (Alt: PTVS18VP1UTP-QX) RoHS : Compliant | 0 | |||
| BAV103-GS18 | Vishay Intertechnologies | (Alt: BAV103-GS18) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator, 450 mA, Ultra-High PSRR, Ultra-Low Noise 1.8V, Active Discharge. (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 16 VDC, 1.1 A, 2.2 A, 0.5 s (Alt: PTS181216V110) RoHS : Compliant | 0 | |||
| BE70C-S-18SP-2-02-0305 | Samtec Inc | SATBE70C-S-18SP-2-02-0305 70 GHZ, BULLS (Alt: BE70C-S-18SP-2-02-0305) RoHS : Compliant | 0 | |||
| ECS-184-20-5PX-TR | ECS International Inc | (Alt: ECS-184-20-5PX-TR) RoHS : Compliant | 0 | |||
| SIT9121AI-1C2-33S187.500000X | SiTime Corporation | (Alt: SIT9121AI-1C2-33S187.500000X) RoHS : Compliant | 0 | |||
| VSML3710-GS18 | Vishay Intertechnologies | (Alt: VSML3710-GS18) RoHS : Compliant | 0 | |||
| PTS181233V075 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 33 VDC, 750 mA, 1.5 A, 0.2 s (Alt: PTS181233V075) RoHS : Compliant | 0 | |||
PTVS18VZ1USKYL | Nexperia | (Alt: PTVS18VZ1USKYL) RoHS : Compliant | 0 | |||
PTS181260V014 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 60 VDC, 140 mA, 340 mA, 0.2 s (Alt: PTS181260V014) RoHS : Compliant | 0 | |||
 Avnet Silica | PTVS18VP1UP,115 | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
| LD1117S18CTR | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
TS1871AIYLT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
TS1874IPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
| LD1117S18TR | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
| LD1117AS18TR | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
| TS1874AIYPT | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
| TS1871AILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
| TS1872IDT | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
| TS1871ILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
| TS1874IYPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
TS1874AIYDT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
| MCP23S18-E/MJ | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
 Braemac Americas-Symmetry | AMMLPABXRS-18.4320T | Abracon Corporation |
| 0 | ||
| ASPI-8040S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180C-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| AMMLPFLAVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPABVRS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLALRS-18.4320T | Abracon Corporation |
| 0 | |||
ABLS-18.432MHZ-L4Q-T | Abracon Corporation | CRYSTAL 18.4320MHZ 18PF SMD RoHS : Unknown |
| 0 | ||
AMPLA7030S-180MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180F-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| AMMLPFLBVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-18.4320T | Abracon Corporation |
| 0 | |||
| ABLS-18.432MHZ-20-B-3-H-T | Abracon Corporation | CRYSTAL 18.4320MHZ 20PF SMD RoHS : Compliant |
| 0 | ||
| CFM600S180 | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| AMMLPEBVRS-18.4320T | Abracon Corporation |
| 0 | |||
| CFM600S180C | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
 Component Electronics, Inc | SMHC-49S-18.432MHZ | IN STOCK SHIP TODAY | 7,817 | |||
| BAV103-GS18 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,500 | ||
| 1008CS-180XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,800 | |||
| 1SS181T5LTST | Toshiba America Electronic Components | IN STOCK SHIP TODAY |
| 3,000 | ||
| RSF1S-18R0JT | SPI Sannohm | IN STOCK SHIP TODAY | 2,700 | |||
| 1008CS-181XK2A | Coilcraft Inc | IN STOCK SHIP TODAY | 755 | |||
| S1812-103K | API Delevan | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 238 | ||
| S1812-473K | API Delevan | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 170 | ||
| TTCE-RS181 | IN STOCK SHIP TODAY | 98 | ||||
| S1812-103J | API Delevan | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 64 | ||
| EZC36DCAZ-S189 | Sullins Connector Solutions | IN STOCK SHIP TODAY | 40 | |||
| TPS18XC-E1-40.000MHZ | Telcona AG | IN STOCK SHIP TODAY | 25 | |||
| DS1813R-5+TR | Maxim Integrated Products | IN STOCK SHIP TODAY |
| 15 | ||
| DS1804-010 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 14 | |||
| PPS181-1A1505-L | TE Connectivity | IN STOCK SHIP TODAY | 10 | |||
 DB Roberts | NAS1830AC04C03 | Military Specifications |
| 5 | ||
| RBS-18 | Essentra Components | BUMPER,ADH MNT,CLEAR,ROUND,.50 | 0 | |||
| 13RS187509B | Essentra Components | ROUND SPACER, .813 ID, 1.188 O | 0 | |||
| RBS-18BK | Essentra Components | BUMPER,ADH MNT,BLACK,ROUND,.50 | 0 | |||
| TOBS-18-01A-RT | Essentra Components | Cable TieAdh MntBlk4.61 in Lg18Lb | 0 | |||
| D4AW35T45DSS18PSNA | Southco | D4AW35T45DSS18PSNA | 0 | |||
| NAS1831C3B07 | RAF Electronic Hardware | RAF STEEL 303 STANDOFFS | 0 | |||
| NAS1830AC04C03 | RAF Electronic Hardware | 0 | ||||
| RS-1811-0125 | Heyco | RS 0187 OD X115 ID X125 LG NAT | 0 | |||
| D4-A35T45DSS18PSNA | Southco | D4-A35T45DSS18PSNA | 0 | |||
| RS-1811-1000 | Heyco | RS 0187 OD X115 IDX1000 LG NAT | 0 | |||
| RS-1811-0937 | Heyco | RS 0187 OD X115 ID X937 LG NAT | 0 | |||
| D4-A35T33DSS18PSNA | Southco | 0 | ||||
| D4-A35T12DSS18PSNA | Southco | D4-A35T12DSS18PSNA | 0 | |||
| RS-1809-0937 | Heyco | RS 0187 OD X091 ID X937 LG NAT | 0 | |||
 EBV Elektronik | BAV103-GS18 | Vishay Intertechnologies | SWITCHING DIODE GENPURP SOD80 MINIMELF (Alt: BAV103-GS18) RoHS : Compliant | 5,970,000 | ||
| ES07D-GS18 | Vishay Intertechnologies | SWITCHING DIODE GENPURP SMF DO219AB (Alt: ES07D-GS18) RoHS : Compliant | 1,150,000 | |||
| TLZ5V6A-GS18 | Vishay Intertechnologies | (Alt: TLZ5V6A-GS18) RoHS : Compliant | 290,000 | |||
| TZMC8V2-GS18 | Vishay Intertechnologies | (Alt: TZMC8V2-GS18) RoHS : Compliant | 150,000 | |||
| TZMC5V6-GS18 | Vishay Intertechnologies | (Alt: TZMC5V6-GS18) RoHS : Compliant | 150,000 | |||
| TZMC15-GS18 | Vishay Intertechnologies | (Alt: TZMC15-GS18) RoHS : Compliant | 110,000 | |||
| VSML3710-GS18 | Vishay Intertechnologies | IR EMITTER HIGH POWER 950NM PLCC2e3 (Alt: VSML3710-GS18) RoHS : Compliant | 56,000 | |||
| TZMC4V3-GS18 | Vishay Intertechnologies | (Alt: TZMC4V3-GS18) RoHS : Compliant | 50,000 | |||
| BAS81-GS18 | Vishay Intertechnologies | (Alt: BAS81-GS18) RoHS : Compliant | 40,000 | |||
| BZT55B6V2-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B6V2-GS18) RoHS : Compliant | 20,000 | |||
| VS-18TQ045STRL-M3 | Vishay Intertechnologies | Schottky D2PAKe3 (Alt: VS-18TQ045STRL-M3) RoHS : Compliant | 5,600 | |||
| ZMY33-GS18 | Vishay Intertechnologies | (Alt: ZMY33-GS18) RoHS : Compliant | 5,000 | |||
| ZMY20-GS18 | Vishay Intertechnologies | (Alt: ZMY20-GS18) RoHS : Compliant | 5,000 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
| MCP23S18-E/SO | Microchip Technology Inc | IO Expander 28Pin SOIC W (Alt: MCP23S18-E/SO) RoHS : Compliant | 54 | |||
 Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,976 | ||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| IDT80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
 Master Electronics | CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | |
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-12-28C-S-18.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-13-20-S-18.00-S-K-M | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSS-18-28-S-03.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PTS18128V200 | Eaton Bussmann | PTC Resettable Fuse 2A(hold) 3.5A(trip) 8VDC 100A 1.2W 2s 0.02Ohm SMD Solder Pad 1812 T/R RoHS : Compliant |
| 0 | ||
| MTLW-101-05-L-S-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-102-05-LM-S-185 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-103-05-SM-S-185 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-103-07-T-S-188-02 | Samtec Inc | Conn Unshrouded HDR 3 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| MTLW-104-07-S-S-185 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-105-07-T-S-185 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-107-05-G-S-180 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-112-06-F-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-114-05-L-S-185 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0112/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0112/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0112/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0112/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 634 | |
| PE3W16309/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male cable 18 inch length using PE-SR405AL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMA male cable 18 inch length using PE-SR405AL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W16309/HS-18 can also be known as a SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has an in-series connection. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3W16309/HS-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16309/HS-18 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 285 | ||
| PE3C0062LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. |
| 162 | ||
| PE3W20796/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. TNC Male to SMA Male Cable 18 Inch Length Using TCOM-400 Coax with HeatShrink., Pasternack’s PE3W20796/HS-18 TNC male to SMA male RF cable assembly using TCOM-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and an SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20796/HS-18 can also be known as a TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.705-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20796/HS-18 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20796/HS-18 TNC plug to SMA plug cable assembly is built with TCOM-400, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20796/HS-18 can also be used in the other direction and will be an SMA plug to TNC plug cable assembly if the opposite connectivity is required. This TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 158 | ||
| PE3C1509LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to 2.92mm Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 2.92mm cable connection on the other. Our SMA to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3C1509LF/HS-18 can also be known as a SMA plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 2.92mm plug cable assembly PE3C1509LF/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1509LF/HS-18 can also be used in the other direction and will be 2.92mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 2.92mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 2.92mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 21 | ||
| PE3C5770LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to 2.4mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5770LF/HS-18 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5770LF/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, LF solder. |
| 20 | ||
| PE3C6070/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to 2.92mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly 2.92mm male to 2.92mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink, 2.92mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax formable cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our formable 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6070/HS-18 can also be known as a formable 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6070/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Formable 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W05445LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Female to N Female Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. PE3W05445LF/HS-180 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3W05445LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W10208/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. MMCX Plug Right Angle to SSMC Jack Bulkhead Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SSMC jack bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SSMC jack bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SSMC bulkhead cable connection on the other. Our right angle MMCX to SSMC cable assemblies have a plug gender on end 1 and jack on end 2. PE3W10208/HS-18 can also be known as a right angle MMCX male to SSMC female cable assembly and will be shipped same-day as it is purchased. MMCX male to SSMC female cable assembly PE3W10208/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SSMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10208/HS-18 can also be used in the other direction and will be SSMC jack bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SSMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SSMC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SSMC jack bulkhead cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W14686/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to BNC Male Cable 18 Inch Length Using PE-047SR Coax with HeatShrink., Radio frequency assembly 2.92mm male to BNC male cable 18 inch length using PE-047SR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to BNC male cable 18 inch length using PE-047SR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a BNC cable connection on the other. Our 2.92mm to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14686/HS-18 can also be known as a 2.92mm plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm male to BNC male cable has a maximum VSWR of 1.4:1. 2.92mm plug to BNC plug cable assembly PE3W14686/HS-18 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method, while the other has the solder/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14686/HS-18 can also be used in the other direction and will be a BNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to BNC cable assembly for quick shipment worldwide. Variations of 2.92mm and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05905/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMP Female Right Angle Cable 18 Inch Length Using Tinned RG405 Coax with HeatShrink., Pasternack’s PE3W05905/HS-18 right angle SMP female to right angle SMP female RF cable assembly using RG405 tinned coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05905/HS-18 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.4:1. This PE3W05905/HS-18 SMP jack to SMP jack cable assembly is built with RG405 tinned, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W07880/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W07880/HS-180 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07880/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W07880/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07880/HS-180 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07633LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to 3.5mm Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 3.5mm cable connection on the other. Our SMA to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. PE3W07633LF/HS-18 can also be known as a SMA plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 3.5mm plug cable assembly PE3W07633LF/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07633LF/HS-18 can also be used in the other direction and will be 3.5mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 3.5mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 0 | ||
| PE3C0874/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. QMA Male to Limited Detent SMP Male Bulkhead Cable 18 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and SMP bulkhead cable connection on the other. Our QMA to SMP cable assemblies have a male gender on end 1 and male on end 2. PE3C0874/HS-18 can also be known as a QMA plug to SMP plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMP plug cable assembly PE3C0874/HS-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid QMA cable assembly is manufactured with QMA to SMP cable connectors, has a 50 Ohm impedance. RF specs on this QMA male to SMP male bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0874/HS-18 can also be used in the other direction and will be SMP male bulkhead to QMA male cable assembly if the opposite connectivity is required. QMA plug to SMP plug bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMP cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to limited detent SMP male bulkhead cable 18 inch length using RG405 coax with heatshrink. |
| 0 | ||
 Venkel Ltd. | SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | ||
| SHPI626650S-181MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI1008-S-18NKT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�10% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-18NJT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�5% RoHS : Not Compliant | 0 | |||
| SHPI121210S-181MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0603-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0805;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI121260S-181MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI1008-S-18NGT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI737345S-181MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-181MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;180uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | DS1814BR-10+TR | Analog Devices (Maxim Integrated) | 11,356 | |||
| DS1830AU+T&R | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +3.06V, PDSO8 RoHS : Compliant | 10,566 | |||
| SN74LS189N | Texas Instruments | Standard SRAM, 16X4, TTL, PDIP16 RoHS : Not Compliant | 8,842 | |||
| BKP1608HS181-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 1.5A, 2 Pin(s) RoHS : Compliant | 8,674 | |||
SNJ54S181J | Texas Instruments | Arithmetic Logic Unit, S Series, 4-Bit, True Output, TTL, CDIP24 RoHS : Not Compliant | 7,299 | |||
| DS1803SN-010 | Analog Devices Inc | Digital Potentiometer, 10000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO16 RoHS : Not Compliant | 6,935 | |||
| DS1811Z-10 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, PDSO3 RoHS : Not Compliant | 6,645 | |||
| DS1821S-T-R | Analog Devices (Maxim Integrated) | 6,636 | ||||
| SNJ54LS189J | Texas Instruments | Standard SRAM, 16X4, TTL, CDIP16 RoHS : Not Compliant | 6,476 | |||
| LD1117S18CTR | STMicroelectronics | RoHS : Compliant | 6,230 | |||
| 2PS18012E44G40113NOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 5,752 | |||
SN75ALS181N | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, TTL, PDIP14 RoHS : Compliant | 5,492 | |||
| DS1806S-010+ | Analog Devices Inc | Digital Potentiometer RoHS : Compliant | 5,323 | |||
| DM77S184J-MIL | National Semiconductor Corporation | OTP ROM, 2KX4, 75ns, TTL, CDIP18 RoHS : Not Compliant | 2,233 | |||
| 1N4148W-V-GS18 | Vishay Intertechnologies | Rectifier Diode, 1 Phase, 1 Element, 0.15A, 100V V(RRM), Silicon RoHS : Compliant | 618 | |||
 Win Source Electronics | LS4148-GS18 | Vishay Huntington | DIODE GEN PURP 75V 150MA SOD80 |
| 345,664 | |
| DS18B20 | Nexperia | 11 B -55 ~ 125C 1-WIRE DIGITAL, |
| 160,000 | ||
| PTVS18VS1UR | Nexperia | 400 W Transient Voltage Suppressor RoHS : Compliant |
| 96,337 | ||
| DS18B20+T&R | Maxim Integrated Products | SENSOR DIGITAL -55C-125C TO92-3 RoHS : Compliant |
| 93,080 | ||
| DS1832S+ | Maxim Integrated Products | IC MICROMONITOR 3.3V 8-SOIC RoHS : Compliant |
| 85,000 | ||
| MS-180 | Hirose Electric Co Ltd | CONN COAX JACK STR 50 OHM SMD RoHS : Compliant |
| 50,000 | ||
| DS1819AR-10 | Maxim Integrated Products | RoHS : Not Compliant |
| 42,743 | ||
| DS18B20Z+ | Maxim Integrated Products | SENSOR DIGITAL -55C-125C 8SOIC / Temperature Sensor Digital, Local -55°C ~ 125°C 12 b 8-SOIC RoHS : Compliant |
| 20,000 | ||
| DS1832S+T&R | Maxim Integrated Products | IC MICROMONITOR 3.3V 8-SOIC / Processor Supervisor 2.88V/2.55V 1 Active High/Active Low/Push-Pull 8-Pin SOIC N T/R RoHS : Compliant |
| 13,850 | ||
| TZMC15-GS18 | Vishay Huntington | DIODE ZENER 15V 500MW SOD80 |
| 8,400 | ||
| DS1813R-10+T&R | Maxim Integrated Products | IC 4.35V W/PB 10% SOT23-3 RoHS : Compliant |
| 6,320 | ||
SN65LVDS180PWR | Texas Instruments | HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant |
| 6,080 | ||
| DS1811R-5/T&R | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL SOT23-3 RoHS : Not Compliant |
| 2,998 | ||
| MRF8S18120H | Freescale Semiconductor |
| 1,760 | |||
| LTC2328IMS-18#PBF | Analog Devices Inc | IC ADC 18BIT SAR 16MSOP / 18 Bit Analog to Digital Converter 1 Input 1 SAR 16-MSOP RoHS : Compliant |
| 247 | ||
 Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 42,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand