 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
S48FDJ-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | FBMJ3216HS480NTV | TAIYO YUDEN | - Tape and Reel (Alt: FBMJ3216HS480NTV) RoHS : Compliant |
| 54,000 | |
| LTS-4812SKR-P | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTS-4812SKR-P) RoHS : Compliant |
| 16,800 | ||
| SIT8008BI-13-YYS-48.000000E | SiTime Corporation | MEMS Oscillator, 48 MHz, PQFN, 2.5mm x 2mm, 50 ppm, 1.62V to 3.63V, SiT8008B Series - Tape and Reel (Alt: SIT8008BI-13-YYS-48.000000E) RoHS : Compliant |
| 6,000 | ||
| LTS-4802BJR-H1 | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTS-4802BJR-H1) RoHS : Compliant |
| 5,807 | ||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | - Rail/Tube (Alt: VS-48CTQ060S-M3) RoHS : Compliant |
| 4,748 | ||
| VS-48CTQ060STRL-M3 | Vishay Intertechnologies | - Tape and Reel (Alt: VS-48CTQ060STRL-M3) RoHS : Compliant |
| 4,000 | ||
| SQS482EN-T1_BE3 | Vishay Intertechnologies | Power MOSFET, N Channel, 30 V, 16 A, 8.5 Milliohms, PowerPAK 1212, 8 Pins, Surface Mount - Tape and Reel (Alt: SQS482EN-T1_BE3) RoHS : Compliant |
| 3,000 | ||
PTVS48VS1UTR,115 | Nexperia | - Tape and Reel (Alt: PTVS48VS1UTR,115) RoHS : Compliant | 3,000 | |||
| CYAT81658-100AS48 | Infineon Technologies AG | Touch Screen Controller Capacitive I2C SPI 48-Ch 100-Pin TQFP Tray - Trays (Alt: CYAT81658-100AS48) RoHS : Compliant |
| 900 | ||
| SLB125S48C | Advanced Energy Industries Inc | AC/DC Power Supply Single-OUT 48V 1.8A (Convection) 85W (Convection) Chassis Mount - Bulk (Alt: SLB125S48C) RoHS : Compliant |
| 40 | ||
| LTS-4801JR | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTS-4801JR) RoHS : Compliant |
| 20 | ||
| AMEOFL10-15S480LPZ | Aimtec | AC/DC Open Frame Power Supply (PSU), ITE, Industrial & Household, 1 Output, 10 W, 85V to 528V - Trays (Alt: AMEOFL10-15S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-5S480LPZ | Aimtec | AC/DC Open Frame Power Supply (PSU), ITE, Industrial & Household, 1 Output, 10 W, 85V to 528V - Trays (Alt: AMEOFL10-5S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-24S480LPZ | Aimtec | AC/DC Open Frame Power Supply (PSU), ITE, Industrial & Household, 1 Output, 10 W, 85V to 528V - Trays (Alt: AMEOFL10-24S480LPZ) RoHS : Compliant |
| 10 | ||
| NGB660S48K | Advanced Energy Industries Inc | AC/DC Power Supply Single-OUT 48V 9.1A (Convection) 440W (Convection) Chassis Mount - Bulk (Alt: NGB660S48K) RoHS : Compliant | 7 | |||
 Newark | PTVS48VP1BPLJ | Nexperia | Tvs Diode, Bidir, 77.4V, 600W, Sod-128Fl; |Nexperia PTVS48VP1BPLJ RoHS : Compliant |
| 10,000 | |
| PTVS48VP1BPLJ | Nexperia | Tvs Diode, Bidir, 77.4V, 600W, Sod-128Fl; |Nexperia PTVS48VP1BPLJ RoHS : Compliant |
| 10,000 | ||
| MTSW-105-09-L-S-480 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 5Pos; |Samtec, Inc. MTSW-105-09-L-S-480 RoHS : Compliant |
| 1,587 | ||
| MTSW-120-09-T-S-485 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 20Pos; |Samtec, Inc. MTSW-120-09-T-S-485 RoHS : Compliant |
| 369 | ||
| DW-18-09-T-S-485 | Samtec Inc | Conn Stack Brd, 2.54Mm, 18Pos, Hdr; |Samtec, Inc. DW-18-09-T-S-485 RoHS : Compliant |
| 120 | ||
| HMTSW-136-09-S-S-480 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 36Pos; |Samtec, Inc. HMTSW-136-09-S-S-480 RoHS : Compliant |
| 90 | ||
| C-CSS48BBRE | nVent Hoffman | Base Bracket Rotary Ext; |Nvent Hoffman C-CSS48BBRE RoHS : Compliant |
| 31 | ||
S48 | NKK Switches | Switch, Toggle, 4Pdt, 20A, 250Vac; Switch Operation:(On)-Off-(On); Contact Configuration:4Pdt; Illumination:Non Illuminated; Product Range:S Series; Switch Mounting:Panel Mount; Contact Current Max:20A; Contact Voltage Ac Nom:250V Rohs Compliant: Yes RoHS : Compliant |
| 21 | ||
| UCH600PS48 | XP Power | Power Supply, Ac-Dc, 48V, 3.1A; Power Supply Applications:Medical; No. Of Outputs:1 Output; Power Rating (Forced Cooling):150W @ 10Cfm; Power Rating (Convection Cooling):600W; Input Voltage Vac:90V Ac To 264V Ac Rohs Compliant: Yes |Xp Power UCH600PS48 RoHS : Compliant |
| 6 | ||
| LBA350PS48 | XP Power | Ac-Dc Power Supplies - 350W, Chassis Mou; |Xp Power LBA350PS48 RoHS : Not Compliant |
| 5 | ||
| AMEOFL10-9S480PEVZ | Aimtec | Psu Ac/Dc Open Ite & Lab 1 Output; Available Until Stocks Are Exhausted |Aimtec AMEOFL10-9S480PEVZ RoHS : Compliant |
| 5 | ||
| VCE20US48 | XP Power | Power Supply, Ac-Dc, 48V, 0.42A; Power Supply Applications:Ite; No. Of Outputs:1 Output; Output Power Max:20W; Output Voltage - Output 1:48V; Output Current - Output 1:420Ma; Output Voltage - Output 2:-; Output Current - Output 2:- Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
| AME30-5S480JZ | Aimtec | Power Supply, Ac-Dc, 5V, 6A; Power Supply Applications:Ite; No. Of Outputs:1 Output; Output Power Max:30W; Output Voltage - Output 1:5V; Output Current - Output 1:6A; Output Voltage - Output 2:-; Output Current - Output 2:- Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
| LCW200PS48 | XP Power | Power Supply, Ac-Dc, 48V, 4.2A; Power Supply Applications:Ite & Industrial; No. Of Outputs:1Outputs; Output Power Max:200W; Output Voltage - Output 1:48V; Output Current - Output 1:4.2A; Output Voltage - Output 2:- Rohs Compliant: Yes |Xp Power LCW200PS48 RoHS : Compliant |
| 2 | ||
| RDF20072S48 | XP Power | Power Supply Applications:Ite, Industrial & Railway; Dc/Dc Converter Type:Half Brick; Input Ratio:12:1; Output Power Max:200W; No. Of Outputs:1 Output; Output Voltage - Output 1:48V; Output Current - Output 1:4.2A; Width:57.9Mm Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
 RS | SS-4856-40 (SS485640) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-40 1.504 X 1.754 X 2-1/2IN, POWDERED METAL BRONZE |
| 32 | |
| SS-4856-12 (SS485612) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-12 1.504 X 1.754 X 3/4IN, POWDERED METAL BRONZE |
| 14 | ||
| 2744429 (PSM-ME-RS485/RS485-P) | Phoenix Contact | REPEATER, REPEATER, RAIL, SERIAL, 24 VAC/VDC +/- 20%, CUL, UL LISTED |
| 11 | ||
| VES255PS48 | XP Power | POWER SUPPLY, AC-DC, DESKTOP, 255W, 48V@5.31A, 90-264V IN, VES255 SERIES RoHS : Compliant |
| 10 | ||
| LCW320PS48 | XP Power | POWER SUPPLY, AC-DC, ENCLOSED, INDUSTRIAL, 320W, 48V, LCW320 SERIES RoHS : Compliant |
| 10 | ||
| VCE20US48 | XP Power | POWER SUPPLY, AC-DC, PCB MOUNT, ENCAPSULATED,20W,48V@0.42A, 85-305V IN, VCE20 SERIE RoHS : Compliant |
| 6 | ||
| UCH600PS48 | XP Power | POWER SUPPLY, AC-DC, ITE, MEDICAL, 600W, 48V@12.5A, 90-264V IN, UCH600 SERIES RoHS : Compliant |
| 6 | ||
| S8VK-S48024 (S8VKS48024) | OMRON Industrial Automation | 480W 24VDC 20A PUSH IN TERMINALS |
| 6 | ||
| LCW200PS48 | XP Power | POWER SUPPLY, AC-DC, ENCLOSED, INDUSTRIAL, 200W, 48V, LCW200 SERIES RoHS : Compliant |
| 5 | ||
| 2762265 (MT-RS485) | Phoenix Contact | SURGE PROTECTOR;MT-RS485 |
| 5 | ||
| 0800388 (WMS 4 8 (30X9)RL) | Phoenix Contact | SHRINK TUBING, POLYOLEFIN, 3:1, 30 MM, WHITE, THERMOMARK, WMS SERIES |
| 4 | ||
| BI5U-Q08-AP6X2-0.6-RS4/S480-S481 (1608924) | TURCK Inc | PROXIMITY SENSOR, UPROX, 5MM SENSING DISTANCENO, PNP, FLUSH MOUNT |
| 4 | ||
| S8VS-48024A (S8VS48024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 20A, 85-264V, ENCLOSED, PANEL, 480W, S8VS SERIES |
| 2 | ||
| 2708562 (PSI-MOS-RS485W2/FO1300 E) | Phoenix Contact | TERMINATION DEVICE WITH AN FO INTERFACE, 1300 NM, FOR GLASS FIBER CABLE |
| 1 | ||
| S48 | NKK Switches | SWITCH, TOGGLE,4PDT,(ON)-OFF-(ON),NON-ILLUM,17.50MM ACTUATOR,15A,125VAC, SOLDER RoHS : Compliant |
| 0 | ||
 STMicroelectronics | TS4871IST | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 7,353 | |
| TDA75610S-48X | STMicroelectronics | 4 x 45 W differential power amplifier with full I2C diagnostics, high efficiency and low voltage operation RoHS : Compliant |
| 4,198 | ||
| TS482IST | STMicroelectronics | 100mW stereo headphone amplifier RoHS : Compliant |
| 3,103 | ||
| TS4890IST | STMicroelectronics | 1W mono audio amplifier with standby active low RoHS : Compliant |
| 507 | ||
| TS482IDT | STMicroelectronics | 100mW stereo headphone amplifier RoHS : Compliant |
| 41 | ||
| TS4890IDT | STMicroelectronics | 1W mono audio amplifier with standby active low RoHS : Compliant |
| 28 | ||
| TS4871ID | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 22 | ||
| TS4871IDT | STMicroelectronics | 1 W mono audio amplifier with standby active high RoHS : Compliant |
| 0 | ||
 Bisco Industries | MS24694-S48 | Crescent Manufacturing | 926 | |||
| MS24694-S48 | MS MACHINE SCREWS | 311 | ||||
| MS24693S48 | MS MACHINE SCREWS | 207 | ||||
| 4623T-1032-SS-48 | RAF Electronic Hardware | 56 | ||||
| AS4863K06 | Allan Aircraft Supply Co LLC | 50 | ||||
| AS4824C04 | AS SEALS | 22 | ||||
| HS4836-284306 | Ferraz Shawmut | 17 | ||||
| 140-009D16S48 | Superior Washer & Gasket Company | 14 | ||||
| 0216-SS-48 | RAF Electronic Hardware | 12 | ||||
| SS48152K1110 EQ | MISC. INDUSTRIAL HRD | 8 | ||||
| 4530A-440-SS-48 | RAF Electronic Hardware | 6 | ||||
| NAS487-16 | NAS Nuts | 5 | ||||
| AS4861J02 | Allan Aircraft Supply Co LLC | 5 | ||||
| AS4862K02 | Allan Aircraft Supply Co LLC | 3 | ||||
| IDMD-16-S-48 | Samtec Inc | 1 | ||||
 Rochester Electronics | NTMFS4821NT1G | onsemi | MOSFET N-Channel 30V 8.8A (Ta), 58.5A (Tc) 8-SON T/R RoHS : Compliant |
| 81,458 | |
NTMFS4898NFT1G | onsemi | MOSFET N-Channel 30V 13.2A (Ta), 117A (Tc) 8-SON T/R RoHS : Compliant |
| 23,815 | ||
| NTMFS4854NST3G | onsemi | MOSFET N-Channel 25V 15.2A (Ta), 149A (Tc) 9-SON T/R RoHS : Compliant |
| 14,828 | ||
| NTTFS4823NTAG | onsemi | MOSFET N-Channel 30V 7.1A (Ta), 50A (Tc) 8-SON T/R RoHS : Compliant |
| 367,762 | ||
| NTMFS4839NHT3G | onsemi | MOSFET N-Channel 30V 9.5A (Ta), 64A (Tc) 8-SON T/R RoHS : Compliant |
| 5,000 | ||
| NTMFS4851NT1G | onsemi | MOSFET N-Channel 30V 9.5A (Ta), 66A (Tc) 8-SON T/R RoHS : Compliant |
| 83,110 | ||
| CYAT81658-64AS48 | Infineon Technologies AG | Touch Screen Controller I²C, SPI 1.71V, 3V 64-QFP Tray RoHS : Compliant |
| 2,231 | ||
| MAX6394US480D3/V+ | Analog Devices Inc | High-Accuracy Microprocessor Reset Circu RoHS : Compliant |
| 530 | ||
GS4882-CDA | Gennum Corporation | Sync Separator IC, PDIP8 |
| 2,360 | ||
| MAX6315US48D3 | Maxim Integrated Products | MAX6315 Open-Drain Sot Microprocessor Reset Circuit |
| 509 | ||
| DS485TM/NAK2 | National Semiconductor Corporation | IC Interface Transceiver RoHS : Compliant |
| 4,940 | ||
| 54LS48J/B | Rochester Electronics LLC | IC Decoder 1 Element 1 x 4:7 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 1,693 | ||
| 93S48PC | Rochester Electronics LLC | 93S48 - Parity Checker RoHS : Not Compliant |
| 12,594 | ||
| SIT1602AC-13-33S-48.000000D | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 48MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 27,000 | ||
SIT1602BI-83-33S-48.000000X | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 48MHz 2.97V ~ 3.63V ±50ppm 4-SMD T/R RoHS : Compliant |
| 50 | ||
 Sager | RS-4805D/H3 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 3kV REG 2:1 36-72Vin +/-5Vout RoHS : Compliant |
| 0 | |
| RS-4815D/H2 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 2kV REG 2:1 36-72Vin +/-15Vout RoHS : Compliant |
| 0 | ||
| MTLW-114-09-G-S-485 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMSD-02-20C-S-48.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly RoHS : Compliant |
| 0 | ||
| MMSD-05-24-S-48.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MMSD-10-22-S-48.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSS-04-24-S-48.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| CQB150W-110S48-CMFD | Cincon Electronics Corporation | Isolated DC/DC Converters - Chassis Mount DC-DC Converter, Quarter Brick, Chassis Mount, with Cover, 150 Watt, 4:1 Input Range, 43-160VAC Input, 48VDC Output, 89.5% Efficiency, 1000 F RoHS : Compliant |
| 0 | ||
| CHB150W-24S48N | Cincon Electronics Corporation | Isolated DC/DC Converters - Through Hole RoHS : Compliant |
| 0 | ||
| CFM150S480-B | Cincon Electronics Corporation | Switching Power Supplies 150W 48V 3.125A Base Plate RoHS : Compliant |
| 0 | ||
| CFM41S480-E | Cincon Electronics Corporation | Switching Power Supplies 40W 90-264VACin 48VDCout 830mA Enc RoHS : Compliant |
| 0 | ||
| IDMD-25-S-48.00 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDMS-24-S-48.00 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-10-S-48.00-ST4 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| JW-24-04-T-S-480-140 | Samtec Inc | Power to the Board .156 Flex Stack, Power Flexible Board Stacker RoHS : Compliant |
| 0 | ||
 TME | TS4871IST | STMicroelectronics | IC: audio amplifier; Pout: 1W; Ch: 2; Amp.class: AB; miniSO8; 8Ω; 8mA RoHS : Compliant |
| 3,990 | |
| VS48VLNVWMTR | ROHM Semiconductor | Diode: TVS; 0.2kW; 53V; 2.5A; unidirectional; Ch: 1 RoHS : Compliant |
| 2,875 | ||
| VOF-15B-S48 | Bel Power Solutions | AC/DC,open; 15.4W; OUT: 1; 320mA; -25÷50°C; THT; 84.63%; 48V |
| 955 | ||
| VS-48CTQ060-M3 | Vishay Intertechnologies | Diode: Schottky rectifying; THT; 60V; 20Ax2; TO220AB; Ufmax: 0.83V RoHS : Compliant |
| 371 | ||
| UQS-4.8W-72LED-NW-48V-40M | POS | LED tape; white neutral; Case (mm): 2835; LED/m: 72; 8mm; IP20; 120° |
| 40 | ||
| VOF-60C-S48 | Bel Power Solutions | Power supply: switching; AC/DC,open; 60W; 85÷264VAC; OUT: 1; 1.25A |
| 18 | ||
| VOF-45C-S48 | Bel Power Solutions | Power supply: switching; AC/DC,open; 45W; 85÷264VAC; OUT: 1; 940mA |
| 18 | ||
| S48 | NKK Switches | Switch: toggle; Pos: 3; 4P3T; (ON)-OFF-(ON); 6A/250VAC; 20A/30VDC RoHS : Compliant |
| 0 | ||
| SQS481ENW-T1_GE3 | Vishay Intertechnologies | Transistor: P-MOSFET; unipolar; -150V; -4.7A; 62.5W RoHS : Compliant |
| 0 | ||
UCP225PS48 | XP Power | Power supply: switching; for building in; 225W; 48VDC; 4.69A; 92% RoHS : Compliant |
| 0 | ||
| TS4890IST | STMicroelectronics | IC: audio amplifier; Pout: 1W; Ch: 1; Amp.class: AB; miniSO8; 8mA RoHS : Compliant |
| 0 | ||
| UCP180PS48 | XP Power | Power supply: switching; open; 180W; 85÷264VAC; OUT: 1; 48VDC; 2.5A RoHS : Compliant |
| 0 | ||
UIS48T20033-PDABG | Bel Power Solutions | Converter: DC/DC; 66W; Iout: 20A; THT; Uinsul: 2.25kV; OUT: 1 |
| 0 | ||
| VCS50US48 | XP Power | Power supply: switching; for building in; 50W; 48VDC; 1.05A; OUT: 1 RoHS : Compliant |
| 0 | ||
| SQS482ENW-T1-GE3 | Vishay Intertechnologies | Transistor: N-MOSFET; TrenchFET®; unipolar; 30V; 16A; 62W |
| 0 | ||
 Ameya Holding Limited | TPD4S481TRGRRQ1 | Texas Instruments | RoHS : Compliant | 70,156 | ||
| TS4871IDT | STMicroelectronics | TS4871 Series 5.5 V 1 W Output Rail to Rail 1W Audio Power Amplifier - SOIC-8 RoHS : Compliant | 5,100 | |||
| TS482IST | STMicroelectronics | TS482 Series 5.5 V 100 mW Surface Mount Stereo Headphone Amplifier - MSOP-8 RoHS : Compliant | 4,100 | |||
| TPS48110AQDGXRQ1 | Texas Instruments | RoHS : Compliant | 3,192 | |||
NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant | 2,600 | |||
| FBMJ3216HS480NTV | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| FBMJ3216HS480NT | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| FBMJ3216HS480NT8 | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| NTMFS4834NT1G | onsemi | N-Channel 30 V 3 mOhm 2.31 W Surface Mount Power MOSFET - SOIC-8 RoHS : Compliant | 1,550 | |||
| LTS-4801JR | Lite-On Semiconductor Corporation | RoHS : Not Compliant | 900 | |||
| VS48VLNVWMTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS48VLNVWMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| DS485M/NOPB | Texas Instruments | DS485M/NOPB 2.5Mbit/s 线路收发器, EIA/TIA-485，RS-422，RS-485接口, 差分接收器信号, 5 V, 8针 SOIC封装 RoHS : Compliant | 45 | |||
| CS48520AS | Chipanalog | 20 | ||||
| TS4871ID | STMicroelectronics | SO 08 .15 JEDE/200063SAP RoHS : Compliant | 16 | |||
 ComSIT USA | CAS480M12HM3 | Wolfspeed | AVAILABLE EU RoHS : Compliant | 2,925 | ||
ComSIT USA | T491D106M025AS4818 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2917 RoHS : Not Compliant | 19,050 | ||
| TDF8541SDN2S484 | NXP Semiconductors | I2C-BUS CONTROLLED 4 X 45 W POWER AMPLIFIER Audio Amplifier, 44W, 4 Channel(s), 1 Func, BCDMOS, PZFM27 RoHS : Compliant | 17,724 | |||
| DS485MXNOPB | Texas Instruments | LOW POWER RS-485/RS-422 MULTIPOINT TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 13,900 | |||
| SS406USRWAS530A2S487CATM2Z | Everlight Electronics Co Ltd | Electronic Component RoHS : Compliant | 8,989 | |||
| SQS484ENT1GE3 | Vishay Intertechnologies | AUTOMOTIVE N-CHANNEL 40 V (D-S) 175 DEGREE CELSIUS MOSFET Power Field-Effect Transistor, 16A I(D), 40V, 0.013ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,612 | |||
| T495X156M035AS4818 | KEMET Corporation | CAP TANT Molded 15uF 35V �20% 2917 RoHS : Not Compliant | 4,460 | |||
| TS482IST | STMicroelectronics | 100 MILLI WATT STEREO HEADPHONE AMPLIFIER Audio Amplifier, 0.107W, 2 Channel(s), 1 Func, PDSO8 RoHS : Compliant | 4,000 | |||
| T494D336M016AS4814 | KEMET Corporation | TANTALUM CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 16V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 2917 RoHS : Compliant | 3,250 | |||
| TDF8541SDN2S482 | NXP Semiconductors | I2C-BUS CONTROLLED 4 X 45 W POWER AMPLIFIER Audio Amplifier, 44W, 4 Channel(s), 1 Func, BCDMOS, PZFM27 RoHS : Compliant | 1,821 | |||
| LTS4801G | Lite-On Semiconductor Corporation | 7 SEGMENT NUMERIC DISPLAY Smart/Normal 7 Seg Numeric LED Display, 1-Character, Green, 10mm RoHS : Not Compliant | 1,000 | |||
| VS48CTQ060PBF | Vishay Intertechnologies | SCHOTTKY RECTIFIER, 2 X 20 A Rectifier Diode, Schottky, 1 Phase, 2 Element, 20A, 60V V(RRM), Silicon, TO-220AB RoHS : Compliant | 750 | |||
| XC9536XL10CS48C | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 36-Cell, CMOS, PBGA48 RoHS : Not Compliant | 238 | |||
| DS485TM | National Semiconductor Corporation | LOW POWER RS-485/RS-422 MULTIPOINT TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Not Compliant | 46 | |||
| DCS4808A | Delta Electronics Inc | Electronic Component RoHS : Not Compliant | 15 | |||
| S48SR05003ERB | Delta Electronics Inc | Analog Circuit RoHS : Not Compliant | 9 | |||
 GLYN GmbH & Co. KG | SE-CAB-RS485_CAN | ES+S | Smart Embedded RS485/CAN | 96 | ||
 Interstate Connecting Components | SP5RS48M0B9A1/AA | Amphenol Positronic | 0 | |||
| 107-224S48EE-5 | Glenair Inc | 0 | ||||
| 280-047S4-8P8MEP | Glenair Inc | COMBO CABLE SCKT CNCTR W STND MNTNG FLNG CRMP TERMNTN | 0 | |||
| M85049/109S48KN25-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield |
| 0 | ||
| M85049/144S48N04-3 | Amphenol PCD | M85049144S48N04-3 | 0 | |||
| M85049/144S48N10-6 | Amphenol PCD | M85049144S48N10-6 | 0 | |||
| M85049/144S48Z10-4 | Amphenol PCD | M85049144S48Z10-4 | 0 | |||
| M85049/145S48W06 | Amphenol PCD | M85049145S48W06 | 0 | |||
| 107-224S48CD-5 | Glenair Inc | 0 | ||||
| M85049/109S48KN25-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield |
| 0 | ||
| M85049/109S48TZ24-6 | Amphenol PCD | M85049109S48TZ24-6 | 0 | |||
| M85049/144S48Z32-6 | Amphenol PCD | M85049144S48Z32-6 | 0 | |||
| M85049/145S48W20 | Amphenol PCD | M85049145S48W20 | 0 | |||
| FS4820M/AA | Amphenol Positronic | 0 | ||||
| A85049109S48KX236D | Amphenol PCD | M85049109S48KX23-6D | 0 | |||
 PEI Genesis | S4841P22-30S | SOURIAU-SUNBANK |
| 0 | ||
| S4841R32-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4861-2416-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/109S48KN25-6D | Amphenol PCD |
| 0 | |||
| M85049/144S48N04-3 | Amphenol PCD |
| 0 | |||
| M85049/144S48N10-6 | Amphenol PCD |
| 0 | |||
| M85049/144S48Z10-4 | Amphenol PCD |
| 0 | |||
| M85049/145S48W06 | Amphenol PCD |
| 0 | |||
| S4810-16 | SOURIAU-SUNBANK |
| 0 | |||
| S4871C2416S7-12S | SOURIAU-SUNBANK |
| 0 | |||
| S4871C4040S8-12S-043 | SOURIAU-SUNBANK |
| 0 | |||
| S4871FM1106R-12 | SOURIAU-SUNBANK |
| 0 | |||
| S4876 | SOURIAU-SUNBANK |
| 0 | |||
| S4861-1810-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4871C2010S4-12 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 9111-4MS48AFS101C7PU-A001 | 5,000 | ||||
| 9B1TS48P0G001 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 50 | ||
 Rutronik | ITS4880RCUMA1 | Infineon Technologies AG | 8xHSS 200mOhm 45V PowerSO36 SMD RoHS : Compliant |
| 3,200 | |
| SQS488CENW-T1_GE3 | Vishay Intertechnologies | DUAL N-CH 40V 16A 6.4mOhm PPAK 1212-8W RoHS : Compliant |
| 3,000 | ||
 Chip 1 Exchange | US4881LUC-AAA-100-WB | Melexis Microelectronic Integrated Systems | INSTOCK | 343,924 | ||
| IS485E | INSTOCK | 7,478 | ||||
| BFS 483 H6327 | INSTOCK | 3,777 | ||||
| T491D686M010AS4820R087 | KEMET Corporation | INSTOCK | 2,500 | |||
| TTMS-4.8-1 | TE Connectivity | INSTOCK | 1,781 | |||
| FCFBMJ3216HS480NT | TAIYO YUDEN | INSTOCK RoHS : Compliant | 1,291 | |||
| ABLS-48.000MHZ-18-R40-B4H | INSTOCK | 910 | ||||
| 1005S48HN-R | INSTOCK | 400 | ||||
| 1005S48HN-R | Martel Electronics Corporation | INSTOCK | 194 | |||
| 1005S48HN-R | MPA | INSTOCK | 100 | |||
| NPH10S4805I | NEWPC | INSTOCK | 49 | |||
| G6A-234P-ST-US-48VDC | OMRON Corporation | INSTOCK | 32 | |||
| LTS-4801E | INSTOCK | 32 | ||||
| NPH10S4805I | INSTOCK | 6 | ||||
XCF16PFS48C | AMD Xilinx | INSTOCK RoHS : Not Compliant | 2 | |||
 Avnet Abacus | FBMJ3216HS480NT | TAIYO YUDEN | (Alt: CGHMK107C7224KA8TE) RoHS : Compliant | 114,000 | ||
| AKM90PS48 | XP Power | ACDC Power Supply ITE Medical 1 Output 90 W 48 VDC 188 A (Alt: AKM90PS48) RoHS : Compliant | 26 | |||
| AQM250PS48 | XP Power | (Alt: AQM250PS48) RoHS : Compliant | 3 | |||
| MB65S48C | Advanced Energy Industries Inc | (Alt: MB65S48C) RoHS : Compliant | 0 | |||
| VES255PS48 | XP Power | ACDC EXTERNAL PSU 255W LEVEL VI (Alt: VES255PS48) RoHS : Compliant | 0 | |||
| MFA350PS48 | XP Power | ACDC 350W UChannel Power Supply (Alt: MFA350PS48) RoHS : Compliant | 0 | |||
| UCH600PS48 | XP Power | (Alt: UCH600PS48) RoHS : Compliant | 0 | |||
| CCB250PS48 | XP Power | ACDC Open Frame Power Supply PSU ITE Medical 1 Output 250 W 80V AC to 275V AC (Alt: CCB250PS48) RoHS : Compliant | 0 | |||
| SK01S4812A | Eltek | Module DCDC 1OUT 12V 0083A 1W 7Pin SMD (Alt: SK01S4812A) RoHS : Compliant | 0 | |||
| MHP1000PS48 | XP Power | ACDC Enclosed Power Supply PSU Medical 1 Outputs 1013 kW 48 VDC 21 A (Alt: MHP1000PS48) RoHS : Compliant | 0 | |||
PQ50S-48S(01).jpg) | Hirose Electric Co Ltd | (Alt: CL0236-2024-6-01) RoHS : Compliant | 0 | |||
| NPH25S4812EIC | Murata Manufacturing Co Ltd | Module DCDC 1OUT 121V 21A 25W 6Pin DIP Tube (Alt: NPH25S4812EIC) RoHS : Compliant | 0 | |||
| NPIS48LP2R2MTRF | NIC Components Corp | - Tape and Reel (Alt: NPIS48LP2R2MTRF) RoHS : Compliant | 0 | |||
| NPIS48LS3R3MTRF | NIC Components Corp | Power Inductor SMD 33 uH 20 123 A Shielded 245 A 4mm x 4mm x 18mm - Tape and Reel (Alt: NPIS48LS3R3MTRF) RoHS : Compliant | 0 | |||
| AMEOFL5-5S480HANZ-B | Aimtec | ACDC Power Supply SingleOutput 5V 1A 5W Open Frame Through Hole (Alt: AMEOFL5-5S480HANZ-B) RoHS : Compliant | 0 | |||
Avnet Asia | NPIS48LP2R2MTRF | NIC Components Corp | (Alt: NPIS48LP2R2MTRF) RoHS : Compliant | 0 | ||
| ECS-480-8-33B-CWN-TR | ECS International Inc | (Alt: ECS-480-8-33B-CWN-TR) RoHS : Compliant |
| 0 | ||
| ECS-480-7-33B2-CKM-TR3 | ECS International Inc | (Alt: ECS-480-7-33B2-CKM-TR3) RoHS : Compliant | 0 | |||
| FBMJ3216HS480NT | TAIYO YUDEN | (Alt: FBMJ3216HS480NT) RoHS : Compliant | 0 | |||
| SQS484ENW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS484ENW-T1_GE3) RoHS : Compliant | 0 | |||
| MURS480ET3G | onsemi | (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| TS480GSSD910T-FLP | Transcend Information Inc | (Alt: TS480GSSD910T-FLP) RoHS : Compliant | 0 | |||
PTVS48VP1UP,115 | Nexperia | TVS Diode, PTVSxP1UP Series, Unidirectional, 48 V, 77.4 V, CFP5 (SOD-128), 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 0 | |||
| SQS484CENW-T1_GE3 | Vishay Intertechnologies | Transistor MOSFET N-CH 40V 16A 8-Pin PowerPAK 1212 (Alt: SQS484CENW-T1_GE3) RoHS : Compliant | 0 | |||
| ECS-480-8-36-RWN-TR | ECS International Inc | (Alt: ECS-480-8-36-RWN-TR) RoHS : Compliant | 0 | |||
 Avnet Silica | IS485E | Sharp Microelectronics of the Americas | Photodetector Optoschmitt 3Pin (Alt: IS485E) RoHS : Compliant | 20,000 | ||
| TS482IST | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin MSOP TR (Alt: TS482IST) RoHS : Compliant | 12,000 | |||
| PTVS48VP1UP,115 | Nexperia | TVS Diode PTVSxP1UP Series Unidirectional 48 V 774 V CFP5 SOD128 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 6,000 | |||
| TS482IDT | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin SO N TR (Alt: TS482IDT) RoHS : Compliant | 0 | |||
CS48540-DQZR | Cirrus Logic | DSP FixedPoint 32Bit 150MHz 150MIPS 48Pin LQFP TR (Alt: CS48540-DQZR) RoHS : Compliant | 0 | |||
| CS48L10-CNZR | Cirrus Logic | DSP FixedPoint 32Bit 120MHz 24Pin QFN TR (Alt: CS48L10-CNZR) RoHS : Compliant | 0 | |||
| EVX12DS480AZP | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EVX12DS480AZP) RoHS : Compliant | 0 | |||
| EV12DS480AMZP | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EV12DS480AMZP) RoHS : Compliant | 0 | |||
| PTVS48VP1UP-QX | Nexperia | (Alt: PTVS48VP1UP-QX) RoHS : Compliant | 0 | |||
| EVX12DS480AZPY | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EVX12DS480AZPY) RoHS : Compliant | 0 | |||
| EV12DS480ACZPY | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EV12DS480ACZPY) RoHS : Compliant | 0 | |||
| EV12DS480AMZPY | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EV12DS480AMZPY) RoHS : Compliant | 0 | |||
| PTVS48VS1UR,115 | Nexperia | (Alt: PTVS48VS1UR,115) RoHS : Compliant | 0 | |||
| EV12DS480AMZPEQM | Teledyne HiRel | MUXDAC 12bits 8GSPS Mil Temp Burn In (Alt: EV12DS480AMZPEQM) RoHS : Not Compliant | 0 | |||
| SM8S48A-AU_R2_000A1 | PanJit Semiconductor | PJ6EJXTR13HF06KDO218ABTVSSMDTSM66TSM66QI03PJ (Alt: SM8S48A-AU_R2_000A1) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMMLPDBXCS-48.0000T | Abracon Corporation |
| 0 | ||
| AMMLPEBXJS-48.0000T | Abracon Corporation |
| 0 | |||
| CQB150W-110S48-CMFD | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB150W-24S48N | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CFM150S480-B | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CFM41S480-E | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
| AMMLPFLBVJS-48.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-48.0000T | Abracon Corporation |
| 0 | |||
| CQB150W8-36S48 | Cincon Electronics Corporation | DC-DC Converter RoHS : Compliant |
| 0 | ||
| CQB75-300S48-F | Cincon Electronics Corporation | HIGH INPUT BRICK DC-DC RoHS : Compliant |
| 0 | ||
| CHB300-300S48N-CMFD | Cincon Electronics Corporation | HIGH INPUT BRICK DC-DC RoHS : Compliant |
| 0 | ||
| CHB50W-24S48-CM | Cincon Electronics Corporation | DC-DC Converter Module RoHS : Compliant |
| 0 | ||
| CHB50W-48S48-CM | Cincon Electronics Corporation | DC-DC Converter Module RoHS : Compliant |
| 0 | ||
| AMMLPABVJS-48.0000T | Abracon Corporation |
| 0 | |||
| CFM60S480-P | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | CFB200-48S48 | Cincon Electronics Corporation | IN STOCK SHIP TODAY |
| 286 | |
| 3022S-4-881 | TOBY ELECTRO | IN STOCK SHIP TODAY | 202 | |||
| MTSW-110-09-T-S-485 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 117 | ||
| CGS482U075R3C | Knowles CDE | IN STOCK SHIP TODAY RoHS : Compliant |
| 90 | ||
| DS485M/NOPB | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 56 | ||
| BFS481H6327XTSA1 | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| 505S48WFR | CDI Torque Products | IN STOCK SHIP TODAY | 14 | |||
| OWS4805S1Z | International Power | IN STOCK SHIP TODAY |
| 9 | ||
| GS4882-CKAE3 | Gennum Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| BM90-220S48-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| BM60-220S48-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 5 | ||
| MS4800S-30-0760 | OMRON Corporation | IN STOCK SHIP TODAY |
| 2 | ||
| DM74LS48N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 2 | |||
| PAH100S48-3.3/V | TDK-Lambda Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| DPS48T05 | Delta Electronics Inc | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | 1219-25-SS-48 | RAF Electronic Hardware |
| 311 | ||
| AKS4-8125-3.8B | AVK Industrial Products | AK INSERT M8 ST YZ 0,70-3,8 CL |
| 80 | ||
| DLCBS4-8-01 | Essentra Components | CB SptDual LckNatural.740 in Spc CB Spt Dual Lck Natural | 0 | |||
| LCBS-4-8-19 | Essentra Components | CB SptNon-LckNatural1/2 in Spc CB Spt Non-Lock Natural | 0 | |||
| 1279-25-SS-48 | RAF Electronic Hardware | 0 | ||||
| 2254-2520-SS-48 | RAF Electronic Hardware | 0 | ||||
| AFS48500A | Essentra Components | 0 | ||||
| SRS4-8-01 | Essentra Components | SpacerSlf Ret 4 ScrNat1/2 in Spc | 0 | |||
| AFS48420A | Essentra Components | 48MM BASE 516-18 THREAD X 1.5 | 0 | |||
| BMS-S-48 | Essentra Components | CARD GUIDE,NO ADH,BLACK,4 FT L | 0 | |||
| 4511-440-SS-48 | RAF Electronic Hardware | 0 | ||||
| TRMS48-2 | Essentra Components | 0 | ||||
| AES4-85CSI | PennEngineering (PEM) | 0 | ||||
| AES4-81CSI | PennEngineering (PEM) | 0 | ||||
| ZL-1504-IS-48 | Sugatsune Kogyo Co Ltd | DOOR PULL | 0 | |||
 EBV Elektronik | BTS4880RAUMA1 | Infineon Technologies AG | Smart Power Switch SIPMOS Technology High Side 8 Outputs 45V 14A SOIC36 (Alt: SP000276938) RoHS : Compliant | 10,400 | ||
| BFS483H6327XTSA1 | Infineon Technologies AG | Bipolar RF Transistor Dual NPN 12 V 8 GHz 450 mW 65 mA SOT363 (Alt: SP000750464) RoHS : Compliant | 9,000 | |||
| VS-48CTQ060-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060-M3) RoHS : Compliant | 4,650 | |||
| VS-48CTQ060STRL-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060STRL-M3) RoHS : Compliant | 4,000 | |||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | Schottky Rectifier 60 V 40 A Dual Common Cathode TO263AB 3 Pins 830 mV (Alt: VS-48CTQ060S-M3) RoHS : Compliant | 1,250 | |||
| TS482IST | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin MSOP TR (Alt: TS482IST) RoHS : Compliant | 0 | |||
| TS482IDT | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin SO N TR (Alt: TS482IDT) RoHS : Compliant | 0 | |||
| NTMFS4852NT3G | onsemi | Single NChannel Power MOSFET 30V 155A 21mO (Alt: NTMFS4852NT3G) RoHS : Compliant | 0 | |||
| SQS484EN-T1-GE3 | Vishay Intertechnologies | NCHANNEL 40V DS 175C MOSFET (Alt: SQS484EN-T1-GE3) RoHS : Compliant | 0 | |||
| BFS481H6327XTSA1 | Infineon Technologies AG | Bipolar RF Transistor Dual NPN 12 V 8 GHz 175 mW 20 mA SOT363 (Alt: SP000750462) RoHS : Compliant | 0 | |||
| CYAT81658-64AS48T | Infineon Technologies AG | TrueTouch (Alt: SP005656567) RoHS : Compliant | 0 | |||
| SQS484CENW-T1_BE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175 C MOSFET (Alt: SQS484CENW-T1_BE3) RoHS : Compliant | 0 | |||
| 74AVC16T245XTS48G/TR | SG Micro Corp | Bus XCVR Dual 16CH 3ST 48Pin TSSOP TR (Alt: 74AVC16T245XTS48G/TR) RoHS : Compliant | 0 | |||
| 74LVTN16245XTS48G/TR | SG Micro Corp | (Alt: 74LVTN16245XTS48G/TR) RoHS : Compliant | 0 | |||
| SS406USRWA/S530-A2/S487 | Everlight Electronics Co Ltd | Displays (Alt: 4U406F5121) RoHS : Compliant | 0 | |||
 Flip Electronics | NVTFS4824NTWG | onsemi | Stock, Ship Today RoHS : Compliant |
| 170,000 | |
| NVTFS4824NTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 22,500 | ||
| NTMFS4821NT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 19,500 | ||
| 9EPRS488CKLFTR | Integrated Device Technology Inc | Stock | 12,226 | |||
| ICS9EPRS488CKLF | Integrated Device Technology Inc | Stock | 12,226 | |||
| NTTFS4821NTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,039 | ||
| NVTFS4823NWFTWG | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| NTMFS4851NT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
| NTMS4807NR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
NTMFS4823NT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,500 | ||
| CY8C4548AXI-S485 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 890 | ||
| CY8C4548AZI-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 870 | ||
| CY8C4548AZQ-S485 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 640 | ||
| CY8C4548AZQ-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 500 | ||
| CY8C4548AZI-S485 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 209 | ||
 Master Electronics | PSM-ME-RS485/RS485-P | Phoenix Contact | Repeater - for potential separation and range increase in RS-485 2-wire bus systems - 3-way isolation - rail-mountable RoHS : Compliant |
| 5 | |
| PCMAS48S48 | MTM Power | AC/DC Power Supply - 48W - 48VDC - Input 100-240 VAC - Chassis Mount - cUL/UL certified RoHS : Compliant |
| 3 | ||
| S48A125DL12 | Teledyne Relays | RoHS : Compliant |
| 0 | ||
| S48R75-12 | Teledyne Relays | RoHS : Compliant |
| 0 | ||
| MTLW-114-09-G-S-485 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-132-22-L-S-485 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-108-13-L-S-485 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-02-20C-S-48.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-02-22C-S-48.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-05-24-S-48.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-10-22-S-48.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSS-04-24-S-48.00-S-K | Samtec Inc | .100 Mini Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSS-05-24C-S-48.44-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MS4800A30048010X10RRM | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MS4800B14108010X10RRMX | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0053LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-240 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-240 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0053LF/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0053LF/HS-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0053LF/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2,009 | |
| PE3C0394/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC male to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C0394/HS-48 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0394/HS-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our TNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC plug to SMA plug cable assembly PE3C0394/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0394/HS-48 can also be used in the other direction and will be a right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,442 | ||
| PE3434/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Male Cable 48 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male cable 48 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 48 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3434/HS-48 can also be known as a TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3434/HS-48 RF cable has a PTFE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3434/HS-48 is built with RG188 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements. |
| 210 | ||
| PE3C3803/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMP Female to Mini SMP Female Cable 48 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly SMP female to mini SMP female cable 48 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to mini SMP female cable 48 inch length using PE-P047 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a mini SMP cable connection on the other. Our SMP to mini SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C3803/HS-48 can also be known as a SMP jack to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and FEP dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3803/HS-48 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMP female to Mini SMP female cable has a maximum VSWR of 1.39:1. SMP jack to mini SMP jack cable assembly PE3C3803/HS-48 is built with PE-P047 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to mini SMP cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3803/HS-48 can also be used in the other direction and will be a mini SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to mini SMP cable assembly for quick shipment worldwide. Variations of SMP and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Mini SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5083/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Mini SMP Female to MMCX Plug Cable 48 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly mini SMP female to MMCX plug cable 48 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to MMCX plug cable 48 inch length using PE-P047 coax with heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and MMCX cable connection on the other. Our mini SMP to MMCX cable assemblies have a female gender on end 1 and plug on end 2. PE3C5083/HS-48 can also be known as a mini SMP jack to MMCX male cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to MMCX male cable assembly PE3C5083/HS-48 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency mini SMP female to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5083/HS-48 can also be used in the other direction and will be MMCX plug to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to MMCX cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to MMCX plug cable 48 inch length using PE-P047 coax with heatshrink. |
| 0 | ||
| PE3C5984/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 2.4mm Male to 2.4mm Male Cable Using PE-P086HF Coax with HeatShrink In 48 Inch Length., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 48 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 48 inch length, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 2.4mm cable is a male to male coax assembly, PE3C5984/HS-48, can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5984/HS-48 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 48 inch length. |
| 0 | ||
| PE3W00862/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to N Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly TNC male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00862/HS-48 can also be known as a low loss TNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. TNC plug to N type plug cable assembly PE3W00862/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00862/HS-48 can also be used in the other direction and will be N type male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink. |
| 0 | ||
| PE3W01768/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to MMCX Plug Right Angle Low Loss Cable 48 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly SMA male right angle to MMCX plug right angle low loss cable 48 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MMCX plug right angle low loss cable 48 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W01768/HS-48 can also be known as a low loss right angle SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01768/HS-48 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3W01768/HS-48 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01768/HS-48 can also be used in the other direction and will be a right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15327/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to Water Blue FAKRA Jack Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a FAKRA cable connection on the other. Our low loss right angle SMA to FAKRA cable assembly has a male gender on end 1 and a jack on end 2. PE3W15327/HS-48 can also be known as a low loss right angle SMA plug to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15327/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to FAKRA jack cable has a maximum VSWR of 1.4:1. SMA plug to FAKRA female cable assembly PE3W15327/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15327/HS-48 can also be used in the other direction and will be a FAKRA jack to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to FAKRA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3171/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Cable 48 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male to SMA female cable 48 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 48 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and female on end 2. PE3171/HS-48 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.591 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA jack cable assembly PE3171/HS-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3171/HS-48 RF cable are available on our downloadable PDF datasheet.PE3171/HS-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3425/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Male Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3425/HS-48 can also be known as a TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3425/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3425/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3573/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3573/HS-48 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3573/HS-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3573/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE36292/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. SMA Male to Straight Cut Lead Cable 48 Inch Length Using 75 Ohm RG179 Coax with HeatShrink., Radio frequency assembly SMA male to straight cut lead cable 48 inch length using 75 Ohm RG179 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to straight cut lead cable 48 inch length using 75 Ohm RG179 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE36292/HS-48 can also be known as a SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE36292/HS-48 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has a between series connection. SMA plug to straight cut lead sexless cable assembly PE36292/HS-48 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE36292/HS-48 can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead RF cable assembly as per your requirements. |
| 0 | ||
| PE3991/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to N Male Cable 48 Inch Length Using RG214 Coax with HeatShrink., Radio frequency assembly TNC male to N male cable 48 inch length using RG214 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N male cable 48 inch length using RG214 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our TNC to type N cable assembly has male gender on end 1 and male on end 2. PE3991/HS-48 can also be known as a TNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.600 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. TNC plug to type N plug cable assembly PE3991/HS-48 is built with RG214 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3991/HS-48 RF cable are available on our downloadable PDF datasheet.PE3991/HS-48 can also be used in the other direction and will be type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0198/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to Reverse Polarity SMA Plug Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to reverse polarity SMA plug low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to reverse polarity SMA plug low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss SMA to reverse polarity SMA cable assembly has a male gender on end 1 and a plug on end 2. PE3C0198/HS-48 can also be known as a low loss SMA plug to reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0198/HS-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to SMA plug cable has a maximum VSWR of 1.4:1. SMA plug to reverse polarity SMA male cable assembly PE3C0198/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0198/HS-48 can also be used in the other direction and will be a reverse polarity SMA plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA reverse polarity male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | RDH30072WS48 | XP Power | DC-DC Regulated Power Supply Module RoHS : Compliant | 15,078 | ||
| NTMFS4854NST3G | onsemi | Small Signal Field-Effect Transistor, 15.2A I(D), 25V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,500 | |||
| NTMS4840NR2G | onsemi | Small Signal Field-Effect Transistor, 5.5A I(D), 30V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 10,017 | |||
| NTTFS4823NTAG | onsemi | Power Field-Effect Transistor, 12.6A I(D), 30V, 0.0175ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,816 | |||
| SN74LS481JQ4 | Texas Instruments | Bit-Slice Processor, TTL, CQIP48 RoHS : Not Compliant | 5,753 | |||
| MT29C4G48MAAGBBAKS-48-WT-TR | Micron Technology Inc | 5,560 | ||||
| SUV500MS/480GBK | Kingston Technology Company | 4,988 | ||||
| XC9536XV-3CS48I | AMD Xilinx | Flash PLD, 3.5ns, PBGA48 RoHS : Not Compliant | 3,690 | |||
| XC6SLX150-1LCS484I | AMD Xilinx | Field Programmable Gate Array, 11519 CLBs, 147443-Cell, PBGA484 RoHS : Not Compliant | 3,556 | |||
| SNJ54LS48FK | Texas Instruments | Seven Segment Decoder/Driver, LS Series, True Output, TTL, CQCC20 RoHS : Not Compliant | 3,509 | |||
| XA6SLX75-3CS484C | AMD Xilinx | Field Programmable Gate Array RoHS : Not Compliant | 3,141 | |||
| XQ6SLX75-1LCS484Q | AMD Xilinx | Field Programmable Gate Array, 5831 CLBs, 74637-Cell, PBGA484 RoHS : Not Compliant | 3,049 | |||
| KVR16LR11S4/8HD | Kingston Technology Company | 2,951 | ||||
| XC6SLX75-L1CS484C | AMD Xilinx | Field Programmable Gate Array, 500MHz, 74637-Cell, CMOS, PBGA484 RoHS : Not Compliant | 2,922 | |||
| XQ6SLX150-L1CS484C | AMD Xilinx | Field Programmable Gate Array RoHS : Not Compliant | 1,779 | |||
 Wuhan P&S | NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant |
| 2,500 | |
| NTMFS4834NT1G | onsemi | Power MOSFET 30 V, 130 A RoHS : Compliant |
| 1,450 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand