S50-R68K- Price, Distributor, Stock

Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs.

AES50B226

PennEngineering (PEM)

1/2

AESS50KB426

PennEngineering (PEM)

AESS50R526

PennEngineering (PEM)

1/2

RS-5021-0437

Heyco

RS 0500 OD X219 ID X437 LG NAT

MCS5000-81

Pop Rivets

ECCO

97-38-1216S-5(0920)LOOSE

Amphenol Industrial Operations

10 : $2.316

120

97-45-1418S-5(0920)

Amphenol Industrial Operations

1 : $144.93

97-55-1418S-5(0920)

Amphenol Industrial Operations

1 : $282.25

Flip Electronics

NIS5020MT1TXG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.45

19,000

NCV4275ADS50R4G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $1.78

12,800

S29GL256S90DHSS50

Cypress Semiconductor

Stock

12,073

IDT9LPRS501SGLF

Integrated Device Technology Inc

Stock

6,260

ICS9LPRS501SGLF

Integrated Device Technology Inc

Stock

6,260

NSVS50030SB3T1G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.13

4,330

NIS5020MT2TXG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.46

3,000

NIS5021MT1TXG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.54

3,000

S29GL01GS11FHSS50

Infineon Technologies AG

Stock

1,800

IDT9LPRS501PGLF

Integrated Device Technology Inc

Stock

1,416

9LPRS501PGLF

Integrated Device Technology Inc

Stock, Ship Today

1 : $1.78

1,416

9LPRS501SKLF

Integrated Device Technology Inc

Stock, Ship Today
RoHS : Compliant

1 : $15.27

385

LPC43S50FET180E

NXP Semiconductors

Stock
RoHS : Compliant

378

FS50R07N2E4BOSA1

Infineon Technologies AG

Stock, Ship Today
RoHS : Compliant

1 : $12.65

280

S29GL256S10DHSS50

Infineon Technologies AG

Stock, Ship Today

1 : $4.71

257

Pasternack Enterprises US

PE3W01533/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to N Male Cable 50 CM Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly SMA male to N male cable 50 cm length using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male cable 50 cm length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3W01533/HS-50CM, can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W01533/HS-50CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01533/HS-50CM can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 50 cm length using LMR-240 coax with heatshrink.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

4,803

PE37790/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male Right Angle to Straight Cut Lead Cable 50 CM Length Using RG178 Coax., Radio frequency assembly SMA male right angle to straight cut lead cable 50 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to straight cut lead cable 50 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and straight cut lead cable connection on the other. Our right angle SMA to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a male to sexless coax assembly, PE37790/HS-50CM, can also be known as a right angle SMA plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA plug to straight cut lead sexless cable assembly PE37790/HS-50CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37790/HS-50CM can also be used in the other direction and will be straight cut lead sexless to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to straight cut lead cable 50 cm length using RG178 coax.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

1,134

PE3W04934/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to SSMC Plug Right Angle Cable 50 cm Length Using RG188 Coax with HeatShrink., Radio frequency assembly SMA male to SSMC plug right angle cable 50 cm length using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug right angle cable 50 cm length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W04934/HS-50CM, can also be known as a SMA plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W04934/HS-50CM is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMA male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04934/HS-50CM can also be used in the other direction and will be right angle SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug right angle cable 50 cm length using RG188 coax with heatshrink.

1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7

PE71S5006

Pasternack Enterprises

1 : $6,390.0
5 : $6,134.4
10 : $5,878.8

PE71S5009

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 50 MHz, Maximum Frequency: 700 MHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.7:1, Maximum Insertion Loss: 1.1 dB, Minimum Isolation: 60 dB. Reflective SPDT PIN Diode Switch Operating From 50 MHz to 700 MHz Up to 100 Watt (+50 dBm) and Field Replaceable SMA with Heatsink. The PE71S5009 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses SMA connectors at 50 Ohm impedance. This SMA PIN diode reflective switch has a minimum frequency of 50 MHz and a maximum frequency of 700 MHz. The Pasternack PIN diode reflective RF switch is rated at a switching speed of 1.2 ns. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5009 PIN diode switch has a gold-plated aluminum body. This PIN diode switch is rated at a 5 Vdc voltage. Our wide band RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.7:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this SMA reflective switch is 1.1 dB with a minimum isolation of 60 dB. Additional specifications for this wide band SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5009 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect wide band RF PIN diode switch for your requirement.

1 : $7,810.0
5 : $7,497.6
10 : $7,185.2
25 : $6,872.8

PE71S5020

Pasternack Enterprises

Key Specifications, Connector Series: N, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 1 dB. Reflective SPDT PIN Diode Switch Operating From 1 GHz to 2 GHz Up to 70 Watt (+48.45 dBm) and Field Replaceable N-Type with Heatsink. The PE71S5020 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses N-type connectors at 50 Ohm impedance. This N-type PIN diode reflective switch has a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5020 PIN diode switch has a nickel-plated copper body. This PIN diode switch is rated at a 5 Vdc voltage. Our wideband RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.8:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this N-type reflective switch is 1 dB with a typical isolation of 35 dB. Additional specifications for this wideband SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5020 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective N-type coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect wideband RF PIN diode switch for your requirement.

1 : $5,920.0
5 : $5,683.2
10 : $5,446.4
25 : $5,209.6

PE71S5011

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 1 GHz, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1, Maximum Insertion Loss: 1.2 dB, Minimum Isolation: 55 dB. Reflective SPDT PIN Diode Switch Operating From 1 GHz to 6 GHz Up to 50 Watt (+47 dBm) and Field Replaceable SMA with Heatsink. The PE71S5011 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses SMA connectors at 50 Ohm impedance. This SMA PIN diode reflective switch has a minimum frequency of 1 GHz and a maximum frequency of 6 GHz. The Pasternack PIN diode reflective RF switch is rated at a switching speed of 600 ns. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5011 PIN diode switch has a gold-plated copper body. This PIN diode switch is rated at a 28 Vdc voltage. Our wide band RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.5:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this SMA reflective switch is 1.2 dB with a minimum isolation of 55 dB. Additional specifications for this wide band SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5011 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect wide band RF PIN diode switch for your requirement.

1 : $5,570.0
5 : $5,347.2
10 : $5,124.4
25 : $4,901.6

PE3W06958LF/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Water Blue FAKRA Jack to BNC Female Cable 50 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly water blue FAKRA jack to BNC female cable 50 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Water blue FAKRA jack to BNC female cable 50 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and BNC cable connection on the other. Our FAKRA to BNC cable assemblies have a jack gender on end 1 and female on end 2. This FAKRA to BNC cable is a jack to female coax assembly, PE3W06958LF/HS-50CM, can also be known as a FAKRA female to BNC jack cable assembly and will be shipped same-day as it is purchased. FAKRA female to BNC jack cable assembly PE3W06958LF/HS-50CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency FAKRA jack to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06958LF/HS-50CM can also be used in the other direction and will be BNC female to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to BNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to BNC female cable 50 cm length using LMR-100 coax with heatshrink, LF solder.

1 : $56.79
25 : $53.95
50 : $51.11
100 : $48.84

PE3W07252/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 50 cm Length Using RG174 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 50 cm length using RG174 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 50 cm length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3W07252/HS-50CM, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3W07252/HS-50CM is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07252/HS-50CM can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 50 cm length using RG174 coax with heatshrink.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3W04043/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to MMCX Jack Low Loss Cable 50 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 50 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to MMCX jack low loss cable 50 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our low loss SMA to MMCX cable assemblies have a male gender on end 1 and jack on end 2. This SMA to MMCX cable is a male to jack coax assembly, PE3W04043/HS-50CM, can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX female cable assembly PE3W04043/HS-50CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04043/HS-50CM can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX jack low loss cable 50 cm length using LMR-100 coax.

1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24

PE3W00341/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to BNC Male Cable 50 CM Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly SMA male to BNC male cable 50 cm length using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male cable 50 cm length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W00341/HS-50CM, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W00341/HS-50CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00341/HS-50CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 50 cm length using LMR-240 coax with heatshrink.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

PE3W07122/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. BNC Male to SMA Male Right Angle Cable 50 cm Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male to SMA male right angle cable 50 cm length using LMR-240-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to SMA male right angle cable 50 cm length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle SMA cable connection on the other. Our low loss BNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This BNC to SMA cable is a male to male coax assembly, PE3W07122/HS-50CM, can also be known as a low loss BNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W07122/HS-50CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07122/HS-50CM can also be used in the other direction and will be right angle SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male right angle cable 50 cm length using LMR-240-UF coax with heatshrink.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3W12494/HS-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. SMA Male to SMA Male Low Loss Cable Using LMR-LW195 Coax with HeatShrink in 50CM., Radio frequency assembly SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 50CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 50CM, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W12494/HS-50CM, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W12494/HS-50CM is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 50CM.

1 : $84.59
25 : $80.36
50 : $76.13
100 : $72.75

PE3W05336/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. MMCX Jack to SMB Jack Bulkhead Cable 50 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MMCX jack to SMB jack bulkhead cable 50 cm length using LMR-100 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX jack to SMB jack bulkhead cable 50 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMB bulkhead cable connection on the other. Our MMCX to SMB cable assemblies have a jack gender on end 1 and jack on end 2. This MMCX to SMB cable is a jack to jack coax assembly, PE3W05336/HS-50CM, can also be known as a MMCX female to SMB female cable assembly and will be shipped same-day as it is purchased. MMCX female to SMB female cable assembly PE3W05336/HS-50CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency MMCX jack to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05336/HS-50CM can also be used in the other direction and will be SMB jack bulkhead to MMCX jack cable assembly if the opposite connectivity is required. MMCX female to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMB cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX jack to SMB jack bulkhead cable 50 cm length using LMR-100 coax with heatshrink.

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

PE3W07377/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Female to SMA Male Right Angle Cable 50 cm Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA female to SMA male right angle cable 50 cm length using RG316-DS coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA male right angle cable 50 cm length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W07377/HS-50CM, can also be known as a SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W07377/HS-50CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07377/HS-50CM can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle cable 50 cm length using RG316-DS coax with heatshrink.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

Venkel Ltd.

C1210X7S500-106MNE

VENKEL LTD

Chip Capacitor;1210;X7S;50V;10uF;�20%
RoHS : Compliant

31,000

C1210X7S500-106KNE

VENKEL LTD

Chip Capacitor;1210;X7S;50V;10uF;�10%
RoHS : Compliant

31,000

C2220X7S500-156KNE

VENKEL LTD

Chip Capacitor;2220;X7S;50V;15uF;�10%
RoHS : Compliant

AGC1206X7S500-106KNE

VENKEL LTD

Auto Grade Capacitor;1206;X7S;50V;10uF;�10%
RoHS : Compliant

C0805X6S500-475KNE

VENKEL LTD

Chip Capacitor;0805;X6S;50V;4.7uF;�10%
RoHS : Compliant

Vyrian

VS-50WQ10FNTRR-M3

Vishay Intertechnologies

Rectifier Diode, Schottky, 1 Phase, 1 Element, 5.5A, 100V V(RRM), Silicon, TO-252AA
RoHS : Compliant

14,672

ADSP-21010BS-50

Analog Devices Inc

Digital Signal Processor, 32-Bit Size, 48-Ext Bit, 12.5MHz, CMOS, PQFP304
RoHS : Not Compliant

12,269

IDCS5020ER470M

Vishay Intertechnologies

General Purpose Inductor, 47uH, 20%, 1 Element, Ferrite-Core, SMD, 5137
RoHS : Compliant

9,915

2S502

Texas Instruments

Transistor

9,527

81_MMBX-S50-0-1/111_NH

Huber+suhner Ag

RF MMBX Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Plug

9,392

LM2587S-5-0-NOPB

Texas Instruments

8,732

PSMN1R6-30MLH/S500

Nexperia

Power Field-Effect Transistor

7,160

LM2930S-5-0-NOPB

Texas Instruments

6,803

AFBR-S50LV85D

Broadcom Limited

VCSEL TOF Photoelectric Sensor, 10mm Min, 30000mm Max, 0.80-2.80V, Rectangular, Board Mount
RoHS : Compliant

6,297

LM2903MX-S5001230

Texas Instruments

4,264

LM9076S-5-0-NOPB

Texas Instruments

4,138

LM2679S-5-0

Texas Instruments

3,520

XC2S50-6FG256C

AMD Xilinx

Field Programmable Gate Array, 384 CLBs, 50000 Gates, 263MHz, 1728-Cell, PBGA256
RoHS : Not Compliant

1,780

85106EC1626S5044

Souriau-sunbank Connection Technologies

MIL Series Connector

687

85108EC1419S5066

Souriau-sunbank Connection Technologies

MIL Series Connector

316

Waytek, Inc.

DSWS50HSK2

HellermannTyton

HellermannTyton DSWS50HSK2 dual swivel saddle mount is a wire-management mount designed to route and secure bundles with flexible positioning. Its dual-swivel saddle design supports cleaner harness alignment, controlled routing, and stable retention in vehicle and equipment applications.

4 : $5.568
10 : $5.0547
50 : $4.6399
100 : $4.4228
200 : $4.3043
500 : $4.0674

3,562

FMS-50

Eaton Electronics

Bussmann FMS Series Slotted Cartridge Fuse 50A 32VDC

5 : $4.3983
10 : $4.0684
50 : $3.8457
100 : $3.6039
200 : $3.3851
500 : $3.2469

140

S500-A60

Trombetta

Electronic Control Module 12/24V

1 : $90.68
5 : $84.63
10 : $79.52
25 : $75.79
50 : $72.54

S500-A6

Trombetta

Electronic Control Module 12/24V

1 : $78.35
5 : $73.74
10 : $71.65
50 : $68.3
100 : $64.94

CSS-50R

Thomas & Betts

Thomas & Betts Deltec CSS-50R strap-on-reel cable ties are continuous-use fastening ties supplied on a reel for high-volume bundling work. Their reel-fed format supports fast dispensing, efficient installation, and flexible cut-to-length fastening in harness and packaging applications.

1 : $91.42
5 : $88.0
10 : $85.14
50 : $80.57
100 : $77.71

Win Source Electronics

ZHCS506TA

Diodes Incorporated

DIODE SCHOTTKY 60V 500MA SOT23-3
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

60,000

LM2576S-5.0

Texas Instruments

IC REG BUCK 5V 3A TO263-5
RoHS : Not Compliant

1,005 : $0.2991
750 : $0.3336
580 : $0.3451
425 : $0.3566
275 : $0.3681
115 : $0.4486

57,100

BTS5014SDAAUMA1

Infineon Technologies AG

IC PWR SWITCH N-CHAN 1:1 TO252-5 / Power Switch/Driver 1:1 N-Channel 6A PG-TO252-5-11
RoHS : Compliant

320 : $1.2186
240 : $1.3596
185 : $1.4062
135 : $1.454
90 : $1.5006
40 : $1.8278

45,000

BTS50452EKAXUMA1

Infineon Technologies AG

IC PWR SWITCH N-CHAN 1:1 DSO-14 / Power Switch/Driver 1:1 N-Channel 3A PG-DSO-14-40-EP
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

25,500

LM2676S-5.0/NOPB

Texas Instruments

IC REG BUCK 5V 3A TO263-7
RoHS : Compliant

211 : $1.4254
158 : $1.5898
122 : $1.6447
89 : $1.6995
58 : $1.7543
24 : $2.138

14,050

AS5040-ASST

Amphenol Spectra-Strip

IC ENCODER PROG 10-BIT 16-SSOP

101 : $2.9819
81 : $3.1031
63 : $3.2243
44 : $3.4667
28 : $3.5879
14 : $3.8304

12,680

BTS50202EKAXUMA2

Infineon Technologies AG

IC PWR SWITCH N-CHAN 1:1 DSO-14 / Power Switch/Driver 1:1 N-Channel 5A PG-DSO-14-40-EP
RoHS : Compliant

315 : $0.9562
235 : $1.0665
185 : $1.1033
135 : $1.1401
85 : $1.1768
35 : $1.4342

12,470

AS5048A-HTSP-500

OSRAM Opto Semiconductors

SENSOR ANGLE 360DEG SMD

88 : $3.4217
71 : $3.5608
55 : $3.6999
38 : $3.978
25 : $4.1171
12 : $4.3953

8,400

XC3S500E-4FTG256I

AMD Xilinx

IC FPGA 190 I/O 256FTBGA / FPGA Spartan®-3E Family 500K Gates 10476 Cells 572MHz 90nm Technology 1.2V 256-Pin FTBGA
RoHS : Compliant

13 : $26.3365
11 : $27.4071
8 : $28.4777
6 : $30.6188
4 : $31.6894
2 : $33.8305

6,080

BTS500851TMBAKSA1

Infineon Technologies AG

IC PWR SWITCH N-CHAN 1:1 TO220-7
RoHS : Compliant

34 : $8.8637
26 : $9.8864
20 : $10.2273
15 : $10.5682
10 : $10.9091
4 : $13.2955

4,650

XC7S50-2CSGA324C

AMD

RoHS : Compliant

5 : $63.3637
4 : $65.9394
3 : $68.5152
2 : $73.6667
1 : $76.2425

4,000

XC3S500E-4PQG208C

AMD Xilinx

IC FPGA 158 I/O 208QFP
RoHS : Compliant

12 : $26.6262
9 : $29.6984
7 : $30.7225
5 : $31.7466
4 : $32.7706
2 : $39.9392

3,565

BTS50055-1TMC

Infineon Technologies AG

IC SWITCH PWR HISIDE TO220-7
RoHS : Compliant

6 : $59.091
4 : $65.9091
3 : $68.1819
2 : $70.4546
1 : $72.7273

3,000

XC2S50-5PQG208C

AMD Xilinx

IC FPGA 140 I/O 208QFP
RoHS : Compliant

3 : $137.8788
2 : $153.7879
1 : $159.091

800

TAS5086DBTRG4

Texas Instruments

IC DGTL AUDIO PWM 6CH 38-TSSOP
RoHS : Compliant

84 : $4.0415
67 : $4.2057
52 : $4.37
36 : $4.6986
24 : $4.8629
11 : $5.1914

701

Wuhan P&S

NCV8775CDS50R4G

onsemi

-
RoHS : Compliant

1 : $2.34
100 : $1.5
500 : $1.24
1,000 : $1.14

25,600

LDL1117S50R

STMicroelectronics

1.2 A high PSRR low dropout linear regulator
RoHS : Compliant

1 : $0.2963
100 : $0.237
500 : $0.1777
1,000 : $0.1185

10,000

LD1117S50CTR

STMicroelectronics

RoHS : Compliant

1 : $0.1987
100 : $0.106
500 : $0.0795
1,000 : $0.0663

7,500

LD1117S50TR

STMicroelectronics

5V Fixed Positive Voltage LDO Regulator
RoHS : Compliant

1 : $0.51
100 : $0.41
500 : $0.31
1,000 : $0.21

5,000

S50-R68K- Distributor

Link URL