| Electronic Components Datasheet Search |
|
W30-38M-2-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | IHW30N135R5 | Infineon Technologies AG | RoHS : Compliant | 3,600 | ||
| MXZ9-PW30-0000 | NXP Semiconductors | 1,239 | ||||
STGW30NC60WD![]() | STMicroelectronics | STGW30NC60WD Series 600 V 30 A Ultra Fast IGBT Flange Mount - TO-247 RoHS : Compliant | 650 | |||
STGW30NC120HD![]() | STMicroelectronics | STGW30NC120HD Series N-Channel 1200 V 30 A Very Fast PowerMESH IGBT - TO-247 RoHS : Compliant | 650 | |||
| STGW30V60F | STMicroelectronics | STMicroelectronics STGW30V60F, N沟道 IGBT 晶体管, 30 A, Vce=600 V, 1MHz, 3针 TO-247封装 RoHS : Compliant | 620 | |||
| RLD90QZW3-00A | ROHM Semiconductor | 905nm, 75W, 225μm Invisible Pulsed Laser Diode |
| 500 | ||
![]() GLYN GmbH & Co. KG | TSW304000010 | Teltonika | DIN RAIL ETHERNET SWITCH | 2 | ||
![]() NexGen Digital | CR0805-8W-301JT | VENKEL LTD | RoHS : Compliant | 10,000 | ||
| MWLW300P | 6,977 | |||||
| CRCW0603-10W-3000FT | VENKEL LTD | 5,963 | ||||
| BCW30 | Fairchild Semiconductor Corporation | RoHS : Compliant | 1,600 | |||
| FW-30-05-F-D-423-085-A | Samtec Inc | RoHS : Compliant | 100 | |||
![]() Powell Electronics | TW-30-01-G-S-120-102 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 50 | |
| ZW-30-09-G-D-355-170 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 50 | ||
| EW-30-10-G-D-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 49 | ||
| DW-30-11-L-D-450 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 42 | ||
| EW-30-11-S-D-500 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 42 | ||
| DW-30-10-L-D-500-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 40 | ||
| TW-30-05-G-D-400-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 39 | ||
| TW-30-10-L-D-290-205 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 35 | ||
| TW-30-12-G-D-650-310 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 34 | ||
| TW-30-03-L-T-250-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 32 | ||
| TW-30-03-T-D-385-075 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 32 | ||
| TW-30-05-G-Q-225-205 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 31 | ||
| TW-30-05-G-Q-250-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 31 | ||
| TW-30-05-T-Q-350-140 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 28 | ||
SW3003A![]() | NKK Switches | MEDIUM CAPACITY ROCKER RoHS : Compliant |
| 9 | ||
![]() PUI | CDSW3004-HF | 69,000 | ||||
| TV02W300-G | 30,000 | |||||
| TV02W300B-HF | 9,000 | |||||
| FSW-30A | 428 | |||||
![]() Rutronik | AC0805FR-7W30R1L | YAGEO Corporation | HP0805 30,1R 1% 0,25W AUTOMO HP RoHS : Compliant |
| 95,000 | |
| W3011A | Pulse Electronics Corporation | Surface m.GPS antenna 3,2x1,6 RoHS : Compliant |
| 3,000 | ||
| W3008 | Pulse Electronics Corporation | Surface m.2,4GHz ant. 3,2x1,6mm RoHS : Compliant |
| 3,000 | ||
| W3006 | Pulse Electronics Corporation | DUALBAND WLAN CERAMIC ANTENNA RoHS : Compliant |
| 2,000 | ||
| W3022 | Pulse Electronics Corporation | DECT CERAMIC ANTENNA SMD RoHS : Compliant |
| 2,000 | ||
| ME910G1W305T060100 | Telit | ME910G1-W3 MODULE AT&T/VzW 37.00.016 RoHS : Compliant |
| 183 | ||
IKW30N60TFKSA1![]() | Infineon Technologies AG | IGBT 600V 30A 1,5V TO247-3 RoHS : Compliant |
| 180 | ||
| IHW30N160R5XKSA1 | Infineon Technologies AG | IGBT 1600V 30A 1.85V TO247-3 RoHS : Compliant |
| 120 | ||
![]() Avnet Asia | DM8W30AQ-13 | Diodes Incorporated | (Alt: DM8W30AQ-13) RoHS : Compliant | 0 | ||
| ERA3ARW302V | Panasonic Electronic Components | SMD Chip Resistor, 3 kohm, ? 0.05%, 100 mW, 0603 [1608 Metric], Metal Film (Thin Film) (Alt: ERA3ARW302V) RoHS : Compliant | 0 | |||
| W3012 | Pulse Electronics Corporation | (Alt: W3012) RoHS : Compliant | 0 | |||
| WR04W3004FTL | Walsin Technology Corporation | (Alt: WR04W3004FTL) RoHS : Compliant | 0 | |||
| G800W306018EU | Amphenol Corporation | G800W306018EU-2.54mm Pitch STR,1x2Pin (Alt: G800W306018EU) RoHS : Compliant | 0 | |||
| BYV430W-300PQ | WeEn Semiconductor Co Ltd | Ultra Fast Recovery Rectifier 300V 30A 3-Pin TO-247 (Alt: BYV430W-300PQ) RoHS : Compliant | 0 | |||
| CW3043 | Pulse Electronics Corporation | (Alt: CW3043) RoHS : Compliant | 0 | |||
| W3010 | Pulse Electronics Corporation | Chip Antenna, Ceramic, 1.585 GHz, 3 dBi,10mm x 3.2mm x 2mm (Alt: W3010) RoHS : Compliant |
| 0 | ||
| BXET-RGBW-30B-03RB | Bridgelux Inc | (Alt: BXET-RGBW-30B-03RB) RoHS : Compliant | 0 | |||
| LE B Q8WP-6B7B-W3-0-A40-R18-Z-XX | ams OSRAM Group | (Alt: LE B Q8WP-6B7B-W3-0-A40-R18-Z-XX) RoHS : Compliant | 0 | |||
| Z8W30UC | Hewlett Packard Co | (Alt: Z8W30UC) RoHS : Compliant | 0 | |||
| NGW30T65M3DFPQ | Nexperia | (Alt: NGW30T65M3DFPQ) RoHS : Compliant | 0 | |||
| SFW30S-2STME1LF | Amphenol Corporation | (Alt: SFW30S-2STME1LF) RoHS : Compliant | 0 | |||
| GA CSHPM1.23-LPLR-W3-0-350-R18 | ams OSRAM Group | (Alt: GA CSHPM1.23-LPLR-W3-0-350-R18) RoHS : Compliant | 0 | |||
BCW30,215![]() | Nexperia | Trans GP BJT PNP 32V 0.1A 3-Pin TO-236AB T/R (Alt: BCW30,215) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BCW30,215![]() | Nexperia | Trans GP BJT PNP 32V 01A 3Pin TO236AB TR (Alt: BCW30,215) RoHS : Compliant | 45,000 | ||
| STGW30H60DFB | STMicroelectronics | IGBT 60 A 155 V 260 W 600 V TO247 3 Pins (Alt: STGW30H60DFB) RoHS : Compliant | 4,080 | |||
| STGW30H65FB | STMicroelectronics | Trans IGBT Chip NCH 650V 60A 3Pin TO247 Tube (Alt: STGW30H65FB) RoHS : Compliant | 3,120 | |||
STGW30NC60WD![]() | STMicroelectronics | Trans IGBT Chip NCH 600V 60A 3Pin3Tab TO247 Tube (Alt: STGW30NC60WD) RoHS : Compliant | 2,700 | |||
| DM5W30AQ-13 | Diodes Incorporated | (Alt: DM5W30AQ-13) RoHS : Compliant | 750 | |||
| NGW30T65M3DFPQ | Nexperia | IGBT 57 A 15 V 199 W 650 V TO247 3 Pins (Alt: NGW30T65M3DFPQ) RoHS : Compliant | 450 | |||
| SBCW30LT1G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBCW30LT1G) RoHS : Compliant | 0 | |||
| DM8W30AQ-13 | Diodes Incorporated | (Alt: DM8W30AQ-13) RoHS : Compliant | 0 | |||
| BYV430W-300PQ | WeEn Semiconductor Co Ltd | Ultra Fast Recovery Rectifier 300V 30A 3Pin TO247 (Alt: BYV430W-300PQ) RoHS : Compliant | 0 | |||
| MXA8-PW30-S001 | Lumileds | LED UniColor White 385lm 3000K Chip LED 2Pin SMD TR (Alt: MXA8-PW30-S001) RoHS : Compliant | 0 | |||
| MXA9-PW30-S001 | Lumileds | (Alt: MXA9-PW30-S001) RoHS : Compliant | 0 | |||
| MXA8-PW30-H001 | Lumileds | LED UniColor White 46lm 3000K Chip LED 2Pin SMD TR (Alt: MXA8-PW30-H001) RoHS : Compliant | 0 | |||
| MXA9-PW30-0000 | Lumileds | LED UniColor White 36lm 3000K Chip LED 2Pin SMD TR (Alt: MXA9-PW30-0000) RoHS : Compliant | 0 | |||
| 88MW300-B0-NAPE/AK | NXP Semiconductors | (Alt: 88MW300-B0-NAPE/AK) RoHS : Compliant | 0 | |||
| XPLBWT-00-0000-000BW30E2 | Cree, Inc. | LED Chip Cool White 5700K 3000mA 2Pin SMD TR (Alt: XPLBWT-00-0000-000BW30E2) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AW24-W300 | Digi International Inc | AnywhereUSB 24 Plus with Wi-Fi, 24 port USB over IP Remote USB 3.1 Hub with 24 type A USB connectors, Dual 100-240VAC Power, Dual 10/100/1000/10G Ethernet, Wi-Fi, support for optional Dual SFP+ module |
| 1 | |
ABM12W-30.0000MHZ-4-D2X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 4PF SMD RoHS : Compliant |
| 0 | ||
ABM12W-30.0000MHZ-8-B1U-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 8PF SMD RoHS : Compliant |
| 0 | ||
ABM8W-30.0000MHZ-7-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 7PF SMD RoHS : Compliant |
| 0 | ||
ABM10W-30.0000MHZ-7-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 7PF SMD RoHS : Compliant |
| 0 | ||
ABM11W-30.0000MHZ-4-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 4PF SMD RoHS : Compliant |
| 0 | ||
ABM11W-30.0000MHZ-6-B1U-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 6PF SMD RoHS : Compliant |
| 0 | ||
ABM11W-30.0000MHZ-7-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 7PF SMD RoHS : Compliant |
| 0 | ||
ABM10W-30.0000MHZ-4-B1U-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 4PF SMD RoHS : Compliant |
| 0 | ||
| ME310M1W303T030100 | Telit | ME310M1-W3 48.00.013 |
| 0 | ||
ABM10W-30.0000MHZ-8-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 8PF SMD RoHS : Compliant |
| 0 | ||
ABM10W-30.0000MHZ-6-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 6PF SMD RoHS : Compliant |
| 0 | ||
ABM12W-30.0000MHZ-8-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 8PF SMD RoHS : Compliant |
| 0 | ||
ABM10W-30.0000MHZ-8-B1U-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 8PF SMD RoHS : Compliant |
| 0 | ||
ABM12W-30.0000MHZ-7-D1X-T3![]() | Abracon Corporation | CRYSTAL 30.0000MHZ 7PF SMD RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | 3RP2511-1AW30 | Siemens | RoHS : Compliant | 1 | ||
![]() EBV Elektronik | GACS8PM1.23-LPLR-W3-0-350-R18 | ams OSRAM Group | OOSGA CS8PM123LPLRW30350R18 Q65113 (Alt: Q65113A5985) RoHS : Compliant | 276,600 | ||
| HLMP-NW30-WZ000 | Broadcom Limited | LED Standard LED White 30mA x03y029 2Pin T1 (Alt: HLMP-NW30-WZ000) RoHS : Compliant | 8,000 | |||
| GACSHPM1.23-LPLR-W3-0-350-R18 | ams OSRAM Group | LED Single Chip Amber 617nm 1A 3Pin SMD TR (Alt: Q65113A6988) RoHS : Compliant | 5,400 | |||
IDW30C65D2XKSA1![]() | Infineon Technologies AG | Diode Switching 650V 30A 3Pin TO247 Tube (Alt: SP001174452) RoHS : Compliant | 2,640 | |||
| UJA1132AHW/3/0Y | NXP Semiconductors | System Basis Chip CAN FD LIN SPI 2 V to 28 V 33 V 48 Pins HTQFPEP (Alt: UJA1132AHW/3/0Y) RoHS : Compliant | 1,500 | |||
| ACPL-W302-500E | Broadcom Limited | Optocoupler LogicOut PushPull DCIN 1CH 6Pin SO Stretched TR (Alt: ACPL-W302-500E) RoHS : Compliant | 1,000 | |||
| IDW30G65C5XKSA1 | Infineon Technologies AG | Silicon Carbide Schottky Diode thinQ Single 650 V 30 A 42 nC TO247 (Alt: SP001632892) RoHS : Compliant | 960 | |||
| IGW30N60TPXKSA1 | Infineon Technologies AG | Trans IGBT Chip NCH 600V 53A 3 TO247 Tube (Alt: SP001379674) RoHS : Compliant | 960 | |||
| BXEB-L0560-RGBW3000-163-A3 | Bridgelux Inc | Vesta RGWB EB Module 560mm (Alt: BXEB-L0560-RGBW3000-163-A3) RoHS : Compliant | 700 | |||
| STGW30H60DFB | STMicroelectronics | IGBT 60 A 155 V 260 W 600 V TO247 3 Pins (Alt: STGW30H60DFB) RoHS : Compliant | 390 | |||
| BXRV-D13-RGBW3000-B3 | Bridgelux Inc | RGBW Array 13mm LES Generation 2 (Alt: BXRV-D13-RGBW3000-B3) RoHS : Compliant | 300 | |||
| STW30N80K5 | STMicroelectronics | (Alt: STW30N80K5) RoHS : Compliant | 210 | |||
STGW30NC60WD![]() | STMicroelectronics | Trans IGBT Chip NCH 600V 60A 3Pin3Tab TO247 Tube (Alt: STGW30NC60WD) RoHS : Compliant | 180 | |||
STGW30NC120HD![]() | STMicroelectronics | IGBT 60 A 275 V 220 W 12 kV TO247 3 Pins (Alt: STGW30NC120HD) RoHS : Compliant | 150 | |||
| BXRV-D13-RGBW3000-A3 | Bridgelux Inc | Vesta Series RGBW 13mm Array With CSP (Alt: BXRV-D13-RGBW3000-A3) RoHS : Compliant | 100 | |||
![]() Flip Electronics | BCW30LT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 63,000 | |
| MKW30Z160VHM4R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 55,000 | ||
| AX5043-1-TW30 | onsemi | Stock, Ship Today RoHS : Compliant | 16,817 | |||
| AX5051-1-TW30 | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,000 | ||
| SBCW30LT1G | onsemi | Stock, Ship Today RoHS : Compliant | 12,000 | |||
| MKW30Z160VHM4 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 4,402 | ||
| AX5045-1-TW30 | onsemi | Stock | 3,000 | |||
| 88MW300-B0-NAPE/AK | NXP Semiconductors | Stock RoHS : Compliant | 2,258 | |||
![]() Master Electronics | AXW301-R-W/AW-R1 | IDEC Corporation | E-STOP RoHS : Compliant |
| 0 | |
| AW-30-03-G-D-160-075 | Samtec Inc | 0.80 mm Flex Stack Surface Mount Micro Board Stacker RoHS : Compliant |
| 0 | ||
| TW-30-01-F-D-160-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-01-G-Q-130-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-01-G-S-120-102 | Samtec Inc | Flexible Surface Mount Board Stacking Header 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TW-30-01-L-D-120-115 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-01-L-T-160 | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-30-01-L-T-160 RoHS : Compliant |
| 0 | ||
| TW-30-01-S-S-120-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-01-T-D-160-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-02-F-6-170-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-02-F-D-180-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-02-F-Q-140-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-02-G-D-142-007 | Samtec Inc | Conn Board Stacker HDR 60 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| TW-30-02-G-D-170-SM-100-M | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-30-02-G-D-186-108 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 3RN20101CW30 | Siemens | Thermistor Motor Protection Relay, 24 V-240V Ac/Dc Auto-Reset, Screw, 1No |
| 50 | |
| HW30 | Extech by FLIR | Environmental Test Equipment Stopwatch, Heat Index |
| 43 | ||
| MGFW304815 | Cosel USA Inc | DC/DC Converters - Through Hole 30W 15V/30V 1A RoHS : Compliant |
| 5 | ||
| LTF12IC2LD W/30 | Banner Engineering Corp | Distance Sensor Modules Laser Diffuse Time-of-Flight Sensor; Range: 50-12000 mm; Input: 12-30 V dc; Output: Analog: 4-20 mA; Class 2 Laser; Discrete: NPN/PNP Configurable; 9 m (30 ft) Cable |
| 3 | ||
| T30SN6R W/30 | Banner Engineering Corp | Photoelectric Sensor, Receiver, 60m, 10-30VDC, NPN, Cable, T30 |
| 1 | ||
| M18SP6FF100 W/30 | Banner Engineering Corp | Photoelectric Sensors EZ-BEAM M18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 9 m (30 ft) Cable |
| 1 | ||
| QS186LE W/30 | Banner Engineering Corp | Sensor,Laser,Emitter,Class 1,Opposed,15m Range,10-30 VDC,w/30' Cord,74168 |
| 1 | ||
| SI-MAGB1SMCO W/30 | Banner Engineering Corp | Magnetic Switch, Actuator 1 NC/1 NO, Repeat Switching Accur: +/- 0.1 mm, 9m cable, 807125 |
| 1 | ||
| SMU315LP W/30 | Banner Engineering Corp | Banner Engineering SMU315LP W/30 Photoelectric Sensor, Polarized Retro, 3m, 24-240VAC/DC, SPDT, Cable, Mini-Beam |
| 1 | ||
| WLF12XW3000S24QP | Banner Engineering Corp | LED Lighting Bars & Strips Flexible Strip Light, 3000mm, 24VDC, Daylight White, Non-Cascadable, QD, WLF12 |
| 0 | ||
| DKMW30F-12 | Mean Well | Isolated DC/DC Converters 9-36Vin +/-12Vout +/-1250mA DIP Iso RoHS : Compliant |
| 0 | ||
| MGFW304812 | Cosel USA Inc | Isolated DC/DC Converters, 2-Output: 30W ±12 or +24V 1.25A, 18-76Vin, Through Hole 6-DIP RoHS : Compliant |
| 0 | ||
| MGFW302412 | Cosel USA Inc | Isolated DC/DC Converters 30W ±12 or +24V 1.25A, 9-36Vin,Through Hole 6-DIP RoHS : Compliant |
| 0 | ||
| BI15R-W30-DAP6X-H1141 | TURCK Inc | ProXimity Sensor; 15mm Sensing; NO; Dynamic Output; Ring Sesnor; Flush Mount; |
| 0 | ||
| Q45VR3DL W/30 | Banner Engineering Corp | Photoelectric Sensor, Diffuse, 1.8m, 12-250VDC/24-250VAC, SPDT, Cable, Q45 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8874/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/YW-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/YW-300 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/YW-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax. |
| 68 | |
| PE3C8749/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-YW, RF Cable Type: Belden 4855R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8749/YW-300, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8749/YW-300 is built with belden 4855R-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax. |
| 51 | ||
| PE3C8875/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/YW-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/YW-300 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax. |
| 51 | ||
| PE3C8747/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-YW, RF Cable Type: Belden 4855R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/YW-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/YW-300 is built with belden 4855R-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-YW coax. |
| 44 | ||
| PE3C8873/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-YW, RF Cable Type: Belden 1855A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/YW-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/YW-300 is built with Belden 1855A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-YW coax. |
| 44 | ||
| PE3C8743/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-YW, RF Cable Type: Belden 4694R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/YW-300, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/YW-300 is built with belden 4694R-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/YW-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax. |
| 17 | ||
| PE3C8741/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-YW, RF Cable Type: Belden 4694R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/YW-300, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/YW-300 is built with belden 4694R-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax. |
| 17 | ||
| PE3C8818/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/YW-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 1 | ||
| PE3C8815/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/YW-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/YW-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 1 | ||
| PE3C8813/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/YW-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 1 | ||
| PE3C8817/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/YW-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/YW-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 0 | ||
| PE3C8744/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-YW, RF Cable Type: Belden 4694R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/YW-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/YW-300 is built with belden 4694R-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax. |
| 0 | ||
| PE3C8742/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-YW, RF Cable Type: Belden 4694R-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/YW-300, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/YW-300 is built with belden 4694R-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/YW-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-YW coax. |
| 0 | ||
| PE3C8814/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/YW-300, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/YW-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 0 | ||
| PE3C8816/YW-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-YW, RF Cable Type: Belden 1694A-YW, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-YW Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/YW-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/YW-300 is built with Belden 1694A-YW which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-YW coax. |
| 0 | ||
![]() Venkel Ltd. | CR0402-16W-3002FT | VENKEL LTD | Chip Resistor;0402;1/16W;30K;�1% RoHS : Compliant | 14,000 | ||
| CRS0603-10W-3000FT | VENKEL LTD | Anti-Sulfuration CR;0603;1/10W;300R;�1% RoHS : Compliant | 8,000 | |||
| CRS0201-20W-3010FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;301R;�1% RoHS : Compliant | 0 | |||
| CRS0201-20W-303JT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;30K ;�5% RoHS : Compliant | 0 | |||
| CRS0201-20W-3092FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;30.9K;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-302JT | VENKEL LTD | Chip Resistor;0402;1/10W;3K;�5% RoHS : Compliant | 0 | |||
| CR0805-10W-3010DT | VENKEL LTD | Chip Resistor;0805;1/10W;301R;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-303JT | VENKEL LTD | Chip Resistor;0805;1/10W;30K;�5% RoHS : Compliant | 0 | |||
| CR0805-10W-3092DT | VENKEL LTD | Chip Resistor;0805;1/10W;30.9K;�0.5% RoHS : Compliant | 0 | |||
| CR1206-4W-3002DT | VENKEL LTD | Chip Resistor;1206;1/4W;30K;�0.5% RoHS : Compliant | 0 | |||
| CR1206-8W-304JT | VENKEL LTD | Chip Resistor;1206;1/8W;300K;�5% RoHS : Compliant | 0 | |||
| CR1206-8W-3091DT | VENKEL LTD | Chip Resistor;1206;1/8W;3.09K;�0.5% RoHS : Compliant | 0 | |||
| CR2010-1W-30R9FT | VENKEL LTD | Chip Resistor;2010;1W;30.9R;�1% RoHS : Compliant | 0 | |||
| CR2512-1W-3011FT | VENKEL LTD | Chip Resistor;2512;1W;3.01K;�1% RoHS : Compliant | 0 | |||
| CR2512-1W-3093FT | VENKEL LTD | Chip Resistor;2512;1W;309K ;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | MT5C1008CW-30/883C | Micron Technology Inc | 6,567 | |||
| MT5C1008W30 | Micron Technology Inc | Memory IC | 6,485 | |||
| MT5C2568CW30/883C | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 6,024 | |||
| MT5C2568CW30L | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 5,413 | |||
| MT5C2568CW30LIT | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 5,179 | |||
| MT5C2568CW30L883C | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 5,117 | |||
| MT52C9005CW30/883C | Micron Technology Inc | Memory IC RoHS : Compliant | 4,512 | |||
| MT5C2568CW30IT | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 4,229 | |||
| MT5C1628ECW-30L | Micron Technology Inc | Standard SRAM, 2KX8, 30ns, CMOS, CQCC32 RoHS : Not Compliant | 3,995 | |||
| MT5C1005CW-30883C | Micron Technology Inc | 3,915 | ||||
| MT5C2568ECW-30AT | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CQCC32 RoHS : Not Compliant | 2,885 | |||
| MT5C2568CW30 | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, CDIP28 RoHS : Not Compliant | 2,754 | |||
| MT5C1008CW-30L/883C | Micron Technology Inc | 2,637 | ||||
| MT5C1001CW-30883C | Micron Technology Inc | 2,541 | ||||
| MT5C1628ECW-30 | Micron Technology Inc | Standard SRAM, 2KX8, 30ns, CMOS, CQCC32 RoHS : Not Compliant | 2,535 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |