1

Power entry modules without line filter

GSF2

https://www.schurter.com /PG05

Connectors

IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole

Snap-in version

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel Mount :

Snap-in version from front side

- 2 Functions :

Appliance Inlet protection class I or II , Fuseholder for fuse-links

5 x 20 mm on the rear-side 1- or 2-pole

- Meets the requirements of IEC 60335-1 for appliances in unattended

use. This includes the enhanced requirements of glow wire tests acc.

to IEC 60695-2-12 and -13.

Characteristics

- Two "locking" snappers reinforce connector against repeated or exces-

sive pull out force during plug removal

- All single elements are already wired

- Fuseholder on the inside of the equipment prevents accidental use of

incorrect fuse-links by the user

- Suitable for use in equipment according to IEC/UL 60950

Other versions on request

- Ground terminal, solder/quick-connect, 90° to connector axis

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

10 A / 125 VAC; 60 Hz

Dielectric Strength

> 2.2 kVAC between L-N

> 3 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection

from front side IP 40 acc. to IEC 60529

Insulation cover

Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal

Quick connect terminals 4.8 x 0.8 mm

, Ground terminal: Solder terminals or

quick connect terminals tin-plated

Solder terminal on request

Panel Thickness S

Snap-in: 1/1.2/1.5/2/2.5/3 mm

(other on request) (all steps with one

variant)

Material: Housing

Thermoplastic, black, UL 94V-0

appliance inlet/-outlet

C14 / C18 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10 A,

Protection Class I or II

Fuseholder

1 or 2 pole, Shocksafe category PC2

acc. to IEC 60127-6,

for fuse-links 5 x 20 mm

Rated Power Acceptance @

Ta 23 °C

5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole)

per pole

Power Acceptance @ Ta >

23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals