Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

FREQ.

(MHz)

ON INSERTION LOSS (dB)

Control @ 0V/-5V

IN-OUT

OFF ISOLATION (dB)

Control @ 0V/-5V)

IN-OUT

VSWR

IN

OUT

—

x

σ

—

x

σ

—

x

ON

—

x

OFF

—

x

3.00

5.00

10.00

20.00

50.00

100.00

200.00

500.00

911.55

1000.00

1581.00

2107.00

2370.00

2489.55

2752.55

3278.55

3804.55

4330.55

4474.00

4600.00

0.54

0.54

0.54

0.61

0.59

0.62

0.65

0.70

0.75

0.76

0.92

0.92

0.88

1.01

1.17

1.15

1.16

0.87

0.70

1.08

0.04

0.04

0.04

0.06

0.04

0.04

0.04

0.04

0.04

0.04

0.05

0.06

0.06

0.07

0.09

0.11

0.08

0.05

0.04

0.04

83.44

83.46

81.44

76.29

69.27

66.59

61.43

53.61

47.64

46.91

41.27

37.77

37.33

36.86

35.65

33.10

33.46

31.99

32.16

32.78

4.68

2.97

2.66

2.13

0.92

1.42

0.74

0.93

0.59

0.61

0.47

0.41

0.42

0.43

0.39

0.42

0.37

0.42

0.40

0.42

1.12

1.12

1.12

1.12

1.12

1.12

1.12

1.13

1.14

1.14

1.22

1.36

1.37

1.41

1.51

1.53

1.50

1.31

1.23

1.13

1.12

1.12

1.12

1.12

1.12

1.12

1.12

1.13

1.15

1.16

1.20

1.21

1.26

1.34

1.42

1.39

1.35

1.24

1.23

1.16

16.46

16.21

16.21

16.04

15.37

14.63

14.00

12.83

11.86

11.79

11.85

11.91

9.64

9.98

9.70

13.14

13.37

15.41

17.84

14.40

1. Max. Input RF power, +27 dBm except below 500 MHz +24 dBm

2. Control voltage (-10V) maximum.

3.Video leakage or break through is defined as leakage of switching signal to RF output ports.

4. All RF connections must be DC blocked or held at 0V DC.

KSW-2-46+

INSERTION LOSS

0.0

0.4

0.8

1.2

1.6

2.0

0

920

1840

2760

3680

4600

FREQUENCY (MHz)

at RF level of 10 dBm

KSW-2-46+

VSWR

1.0

1.2

1.4

1.6

1.8

2.0

0

920

1840

2760

3680

4600

FREQUENCY (MHz)

INPUT

OUTPUT

at RF level of 10 dBm

KSW-2-46+

ISOLATION

0

20

40

60

80

100

0

920

1840

2760

3680

4600

FREQUENCY (MHz)

at RF level of 10 dBm

Typical Performance Data

KSW-2-46+

Page 2 of 2