U6264BDC07LL datasheet(3/9 Pages) ZMD

3 / 9 page

April 20, 2004

U6264B

a Stresses greater than those listed under „Absolute Maximum Ratings“ may cause permanent damage to the device. This is a stress rating

only, and functional operation of the device at condition above those indicated in the operational sections of this specification is not implied.

Exposure to absolute maximum rating conditions for extended periods may affect reliability

b Maximum voltage is 7 V

c Not more than 1 output should be shorted at the same time. Duration of the short circuit should not exceed 30 s.

Absolute Maximum Ratings a

Symbol

Min.

Max.

Unit

Power Supply Voltage

VCC

-0.3

Input Voltage

-0.3

VCC + 0.5 b

Output Voltage

-0.3

VCC + 0.5 b

Power Dissipation

-1

Operating Temperature

C-Type

K-Type

A-Type

-40

125

°C

Storage Temperature

C/K-Type

A-Type

Tstg

-55

-65

125

150

°C

Output Short-Circuit Current

at VCC = 5 V and VO = 0 V c

| IOS |100

Characteristics

All voltages are referenced to VSS = 0 V (ground).

All characteristics are valid in the power supply voltage range and in the operating temperature range specified.

Dynamic measurements are based on a rise and fall time of

≤ 5 ns, measured between 10 % and 90 % of VI,as well as

input levels of VIL = 0 V and VIH = 3 V. The timing reference level of all input and output signals is 1.5 V,

with the exception of the tdis-times, in which cases transition is measured ± 200 mV from steady-state voltage.

d -2 V at Pulse Width 10 ns

Recommended

Operating Conditions

Symbol

Conditions

Min.

Max.

Unit

Power Supply Voltage

VCC

4.5

5.5

Data Retention Voltage

VCC(DR)

2.0

Input Low Voltage d

VIL

-0.3

0.8

Input High Voltage

VIH

2.2

VCC + 0.3

U6264BDC07LL Datasheet(PDF) 3 Page - Zentrum Mikroelektronik Dresden AG

U6264BDC07LL Datasheet(HTML) 3 Page - Zentrum Mikroelektronik Dresden AG

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Download

Link URL