HA5024IBZ datasheet(4/17 Pages) RENESAS

4 / 17 page

HA5024

FN3550 Rev 6.00

Page 4 of 17

February 8, 2006

AC CHARACTERISTICS

(AV = +2, RF = 681)

Slew Rate

Note 8

475

s

Full Power Bandwidth

Note 9

MHz

Rise Time

Note 10

Fall Time

Note 10

Propagation Delay

Note 10

Overshoot

-3dB Bandwidth

VOUT = 100mV

MHz

Settling Time to 1%

2V Output Step

Settling Time to 0.25%

2V Output Step

100

Gain Flatness

5MHz

0.02

20MHz

0.07

AC CHARACTERISTICS

(AV = +10, RF = 383)

Slew Rate

Note 8

350

475

s

Full Power Bandwidth

Note 9

MHz

Rise Time

Note 10

Fall Time

Note 10

Propagation Delay

Note 10

Overshoot

1.8

-3dB Bandwidth

VOUT = 100mV

MHz

Settling Time to 1%

2V Output Step

Settling Time to 0.1%

2V Output Step

130

VIDEO CHARACTERISTICS

Differential Gain (Note 15)

RL = 150

0.03

Differential Phase (Note 15)

RL = 150

0.03

Degrees

NOTES:

5. VCM = 2.5V. At -40°C Product is tested at VCM = 2.25V because short test duration does not allow self heating.

6. RL = 100, VIN = 2.5V. This is the minimum current which must be pulled out of the Disable pin in order to disable the output. The output is

considered disabled when -10mV

 VOUT  +10mV.

7. VIN = 0V. This is the maximum current that can be pulled out of the Disable pin with the HA5024 remaining enabled. The HA5024 is

considered disabled when the supply current has decreased by at least 0.5mA.

8. VOUT switches from -2V to +2V, or from +2V to -2V. Specification is from the 25% to 75% points.

10. RL = 100, VOUT = 1V. Measured from 10% to 90% points for rise/fall times; from 50% points of input and output for propagation delay.

11. A. Production Tested; B. Typical or Guaranteed Limit based on characterization; C. Design Typical for information only.

12. VIN = +2V, DISABLE = +5V to 0V. Measured from the 50% point of DISABLE to VOUT = 0V.

13. VIN = +2V, DISABLE = 0V to +5V. Measured from the 50% point of DISABLE to VOUT = 2V.

14. VIN = 0V, Force VOUT from 0V to 2.5V, tR = tF = 50ns, DISABLE = 0V.

15. Measured with a VM700A video tester using an NTC-7 composite VITS.

16. VOUT = 2.5V. At -40°C Product is tested at VOUT = 2.25V because short test duration does not allow self heating.

Electrical Specifications

VSUPPLY = 5V, RF = 1k AV = +1, RL = 400 CL 10pF,Unless Otherwise Specified (Continued)

PARAMETER

TEST CONDITIONS

(NOTE 11)

TEST

LEVEL

TEMP.

(°C)

MIN

TYP

MAX

UNITS

FPBW

Slew Rate

VPEAK

-----------------------------;VPEAK 2V

HA5024IBZ Datasheet(PDF) 4 Page - Renesas Technology Corp

HA5024IBZ Datasheet(HTML) 4 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Datasheet Download

Link URL