ISL6596

FN9240 Rev.3.00

Page 10 of 13

May 30, 2018

Please visit our website to make sure you have the latest revision.

DATE

REVISION

CHANGE

May 30, 2018

FN9240.3

Added link to product information page in Related Literature section on page 1.

Updated Functional Pin Descriptions to match DFN package and moved descriptions to page 3.

Added Notes 1, 2, and 3 to Ordering Information table on page 3.

In Absolute Maximum Ratings section on page 5, changed the following:

-PHASE Voltage: 15V to 30V

Updated Package Outline Drawing M8.15 to the latest revision.

-Revision 1 to Revision 2: Updated to new POD format by removing table, moving dimensions onto drawing,

and adding land pattern

-Revision 2 to Revision 3: Changed values in Typical Recommended Land Pattern from:

2.41 (0.095) to 2.20 (0.087)

0.76 (0.030) to 0.60 (0.023)

0.200 to 5.20 (0.205)

-Revision 3 to Revision 4: changed Note 1 “1982” to “1994”

Updated template and added Renesas disclaimer.

Removed About Intersil section.

November 10, 2015

FN9240.2

Updated the Ordering Information table on page 1.

Added Revision History and About Intersil sections.

Updated Package Outline Drawing L10.3X3C to the latest revision.

-Revision 2 to Revision 3 changes - Removed package outline and included center to center distance

between lands on recommended land pattern. Removed Note 4 "Dimension b applies to the metallized

terminal and is measured between 0.18mm and 0.30mm from the terminal tip." since it is not applicable to

this package. Renumbered notes accordingly.

-Revision 3 to Revision 3 changes - Tiebar Note 4 updated From: Tiebar shown (if present) is a non-functional

feature. To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or

ends).