4 / 4

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the data sheet can be found on our website

Ausgabe / Issue LMS-2012-04-20

e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de

LMS

Bauform / Size : 2512

10000

1000

Spezifikation/Specification

Parameters

Test Conditions

Specification

Typical data

Maximum Temperature for full power operation

120 °C

120 °C

120 °C

Working Temperature

-55 to 170 °C

-55 to 170 °C

-55 to 170 °C

Thermal Shock

MIL-STD-202 method 107E-B1

0.1 %

0.1 %

Overload

MIL-R-26E (5 times rated power, 5 sec)

0.2 %

0.2 %

Solderability

MIL-STD-202 method 208

> 95 % coverage

> 95 % coverage

Resistance to Solvents

MIL-STD-202 method 215A, 2.1a, 2.1d

no damage

no damage

Low Temperature Storage and Operation

MIL-STD-26E

0.1 %

0.1 %

Resistance to Soldering Heat

MIL-STD-202 method 210B

0.1 %

0.1 %

Moisture Resistance

MIL-STD-202 method 106

0.1 %

0.1 %

Shock

MIL-STD-202 method 213B-A

0.2 %

0.2 %

Vibration, High Frequency

MIL-STD-202 method 204D-B

0.2 %

0.2 %

Life

MIL-STD-26E

0.2 %

0.2 %

Storage Life at Elevated Temperature

MIL-STD-202 method 108A-F

0.3 %

0.3 %

Current Noise

MIL-STD-202 method 308

0.01 %

0.01 %

Voltage Coefficient (%/V)

MIL-STD-202 method 309

linearity error less than 120dB

120dB

Resistance Temperature Characteristic

MIL-STD-202 method 304 (20 - 60°C)

<50 ppm/K

<50 ppm/K

Thermal EMF

0 - 100 °C

2 µV/ °C max.

2 µV/ °C max.

Frequency Characteristic

inductivity

< 3 nH

< 3 nH

Grenzkurve für maximale Pulsenergie bzw. Pulsleistung für Dauerbetrieb /

Maximum pulse energy respectively pulse power for continuous operation

Isabellenhütte Heusler GmbH & Co. KG

Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30

Die dargestellte Kurve gilt für den Widerstandswert R001. Für andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate

Qualifikation erfolgen sollte. /

This curve is only valid for the resistance value R001. The shape of the curve in the range below 0.1 sec will be different for other resistance values.

Therefore a separate qualification should be made for pulse power close to the above curve.

3