ISL84541, ISL84542, ISL84543, ISL84544

FN6016 Rev 7.00

Page 13 of 18

August 19, 2015

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at

www.intersil.com/support

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make

sure that you have the latest revision

.

DATE

REVISION

CHANGE

August 19, 2015

FN6016.7

- Ordering Information Table on page 3.

- Added Revision History.

- Added About Intersil Verbiage.

*Updated POD M8.118 to most recent revision, changes are as follows:

-Revision 2 to Revision 3 Changes:

Updated to new intersil format by adding land pattern and moving dimensions from table onto drawing

-Revision 3 to Revision 4 Changes:

Corrected lead width dimension in side view 1 from "0.25 - 0.036" to "0.25 - 0.36"

*Updated POD M8.15 to most current revision with changes as follows:

-Revision 0 to Revision 1 Changes:

POD created from MCOL M8.15

-Revision 1 to Revision 2 Changes:

Updated to new POD format by removing table and moving dimensions onto drawing and adding land

pattern

-Revision 2 to Revision 3 Changes:

Changed Note 1 "1982" to "1994"

Changed in Typical Recommended Land Pattern the following:

2.41(0.095) to 2.20(0.087)

0.76 (0.030) to 0.60(0.023)

0.200 to 5.20(0.205)

-Revision 3 to Revision 4 Changes:

Changed Note 1 "1982" to "1994"

*Updated POD P6.064 to most current revision with changes as follows:

Updated to new format (same dimensions, added land pattern and moved dimensions from table onto

drawing)