Digital Potentiometers

10

______________________________________________________________________________________

Acknowledge

The acknowledge bit is a clocked 9th bit that the recipient

uses to handshake receipt of each byte of data (Figure

6). Thus, each byte transferred effectively requires 9 bits.

The master generates the 9th clock pulse, and the recipi-

ent pulls down SDA during the acknowledge clock pulse,

so the SDA line is stable low during the high period of the

clock pulse. When the master transmits to the

MAX5417/MAX5418/MAX5419, the devices generate the

acknowledge bit because the MAX5417/MAX5418/

MAX5419 are the recipients.

Slave Address

The MAX5417/MAX5418/MAX5419 have a 7-bit-long

slave address (Figure 4). The 8th bit following the 7-bit

a write command and high for a no-operation command.

The MAX5417/MAX5418/MAX5419 are available in one

of four possible slave addresses (Table 1). The first 4

bits (MSBs) of the MAX5417/MAX5418/MAX5419 slave

addresses are always 0101. The next 2 bits are factory

programmed (see Table 1). Connect the A0 input to

device addresses for a part. Each device must have a

unique address to share the bus. Therefore, a maxi-

mum of eight MAX5417/MAX5418/MAX5419 devices

can share the same bus.

Table 1. MAX5417/MAX5418/MAX5419 Address Codes

ADDRESS BYTE

PART SUFFIX

A6

A5

A4

A3

A2

A1

A0

NOP/

W

L

01

01

00

0

NOP/W

L

01

01

00

1

NOP/W

M

01

01

01

0

NOP/W

M

01

01

01

1

NOP/W

N

01

01

10

0

NOP/W

N

01

01

10

1

NOP/W

P

01

01

11

0

NOP/W

P

01

01

11

1

NOP/W

SDA

DATA STABLE,

DATA VALID

CHANGE OF

DATA ALLOWED

SCL

Figure 5. Bit Transfer

1

SCL

START

CONDITION

SDA

28

9

CLOCK PULSE FOR

ACKNOWLEDGMENT

ACKNOWLEDGE

NOT ACKNOWLEDGE

Figure 6. Acknowledge