1

New Product

Relays with Forcibly Guided Contacts

G7SA

Compact, Slim Relays Conforming to

EN Standards

• Additional Push-In Plus terminal sockets are used to save

wiring work in comparison with traditional screw terminals.

(Wiring time is reduced by 60%

* in comparison with

traditional screw terminals.)

• Relays with forcibly guided contacts (EN/IEC 61810-3,

Certified by VDE).

• Supports the CE marking of machinery (Machinery Directive).

• Helps avoid hazardous machine status when used as part of

an interlocking circuit.

• Four-pole and six-pole Relays are available.

• The Relay’s terminal arrangement simplifies PWB pattern

design.

• Reinforced insulation between inputs and outputs.

Reinforced insulation between some poles of different polarity.

* According to OMRON actual measurement data

Model Number Structure

Model Number Legend

For the most recent information on models that have been

certified for safety standards, refer to your OMRON website.

Note: Sockets are sold separately.

Be sure to read the Safety Precautions on page 13.

Main unit

Relays with forcibly guided contacts

G7SA-

@A@B@

⎯⎯

⎯

1

2

3

1. NO Contact Poles

2. NC Contact Poles

2: DPST-NO

1: SPST-NC

3: 3PST-NO

2: DPST-NC

4: 4PST-NO

3: 3PST-NC

5: 5PST-NO

Specify the power supply voltage (coil rated voltage) when ordering.

3. Coil Rated Voltage (V)

12 VDC

18 VDC

21 VDC

24 VDC

48 VDC

110 VDC

Options (order separately)

Sockets

P7SA-

@@-@-@@

⎯⎯⎯⎯ ⎯ ⎯ ⎯ ⎯ ⎯

1

2 3

4

5 6

1. Basic Model Name

P7SA: Socket for G7SA

2. Number of Poles

10: 4 poles (10 terminals)

14: 6 poles (14 terminals)

3. Mounting Type

F: Front-mounting

P: Back-mounting

4. LED Indicator

Blank: Without operation indicator LED/built-in diode

ND: With operation indicator LED/built-in diode

5. Terminal Type

Blank: Screw terminals when 3. is F type

PCB terminals when 3. is P type

PU: Push-In Plus terminals

6. Coil Rated Voltage (V)

24 VDC: When 4. is ND