PQ_18 datasheet(3/16 Pages) HIROSE

3 / 16 page

PQ Series●High Power/Signal Connectors for Industrial Machinery

■Product Speciﬁcations

[Non water-resistant type] PQ50 Series

Ratings

Voltage

AC/DC 600V

Operating Temp. Range

−40ç to +105ç

Current

19A/pin

With UL1015 16 AWG

* Depending on current capacity

of the cable used.

Storage Temp.

Range

−55ç to +85ç

Items

Speciﬁcations

Conditions

1. Contact resistance

10mø max

Measured at 100mA

2. Insulation

resistance

Minimum of 5,000Mø

Measured at DC 500V

3. Withstand voltage

No ﬂashover or breakdown.

Apply AC 2,200V for one minute.

4. Durability

Contact resistance: Increase by 10mø or less

from the initial value.

Perform 500 mating cycles.

5. Vibration

resistance

qNo electrical discontinuity of 10µs or more.

wNo broken, cracked or loosened parts.

Frequency 10 to 55 Hz (5 min/cycle).

With half amplitude 0.75mm, 2 hours each for 3 directions.

6. Shock resistance

Acceleration 490m/s

2, duration 11ms, half-sine

wave, 3 times each for 6 axial directions.

7. Temperature

cycles

qChange of contact resistance: 20mø or less

wInsulation resistance: minimum of 1,000Mø

eNo broken, cracked or loosened parts.

Temperature: −55 ➝ +15 to 35 ➝ +105 ➝ +15

to +35ç

Time: 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 min.

Subjected to 5 cycles of time and temp as noted.

8. Moisture resistance

in steady state

qChange of contact resistance: 20mø max

wInsulation resistance: minimum of 1,000Mø

(after drying).

eNo breakage, cracks or loosened parts.

Left in environment of 60ç ±2° and humidity of

90% to 95% for 96 hours.

9. Salt water spray

No signiﬁcant corrosion or damage that

impairs functioning.

5% concentration of salt water spray for 48 hours.

(in mated condition)

Excluding conductor resistance of the cable.

*For test methods not described here, JIS C 5402 is applied.

[ Non water-resistant type ] PQ50S Series

Rating

Voltage

AC/DC 300V

Operating Temp. Range

−40ç to +105ç

Current

12.5A/pin

With UL1007 18 AWG

* Depending on current capacity

of the cable used.

Storage Temp.

Range

−55ç to +85ç

Items

Speciﬁcations

Conditions

1. Contact resistance

5mø max

Measured at 100mA

2. Insulation

resistance

Minimum of 5,000Mø

Measured at DC 500V

3. Withstand voltage

No ﬂashover or breakdown.

Apply AC 2,200V for one minute.

4. Durability

Contact resistance: Increase by 10mø or less

from the initial value.

Perform 500 mating cycles.

5. Vibration

resistance

qNo electrical discontinuity of 10µs or more.

wNo broken, cracked or loosened parts.

Frequency 10 to 55 Hz (5 min/cycle)

With half amplitude 0.75mm, 2 hours each for 3

directions.

6. Shock resistance

Acceleration 490m/s

2, duration 11ms, half-sine

wave, 3 times each for 6 axial directions.

7. Temperature

cycles

qChange of contact resistance: 10mø or less

wInsulation resistance: Minimum of 1,000Mø

eNo broken, cracked or loosened parts.

Temperature: −55 ➝ +15 to 35 ➝ +105 ➝ +15

to +35ç

Time: 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 min.

Subjected to 5 cycles of time and temp. as noted.

8. Moisture resistance

in steady state

qChange of contact resistance: 10mø or less

wInsulation resistance: Minimum of 1,000Mø

(after drying).

eNo broken, cracked or loosened parts.

Left in environment of 60ç ±2° and humidity of

90% to 95% for 96 hours.

9. Salt water spray

No signiﬁcant corrosion or damage that impairs

functioning.

5% concentration of salt water spray for 48 hours.

(in mated condition)

Excluding conductor resistance of the cable.

*For test methods not described here, JIS C 5402 is applied.

PQ Datasheet(PDF) 3 Page - Hirose Electric

PQ Datasheet(HTML) 3 Page - Hirose Electric

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Download

Link URL