Data sheet

BMP180

Page 9

BST-BMP180-DS000-12 | Revision 2.8 | May 2015

Bosch Sensortec

© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third

parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.

Note: Specifications within this document are subject to change without notice.

3. Operation

3.1 General description

bus. The pressure and temperature data has to be compensated by the calibration data of the

3.2 General function and application schematics

The BMP180 consists of a piezo-resistive sensor, an analog to digital converter and a control unit

compensate offset, temperature dependence and other parameters of the sensor.

 UP = pressure data (16 to 19 bit)

 UT = temperature data (16 bit)