RFA1 RADAR ACTIVATOR

Datasheet

Detection Field

RFA1 can be mounted as shown on the left to get

horizontally a “narrow field”. Rotating the module by 90°

results in a wider field.

Fig. 1 and Fig. 2 show typical detection fields for a walking

person at different sensitivity settings. Please note: these

values are typical and depend on many parameters. Please

refer also to chapter Application Notes.

Fig. 1 : Frontal response diagram

Fig. 2: Frontal response, RFA1 turned by 90°

Other characteristics are available for OEMs as options. Please contact info@RFbeam.ch.

Connectors and Control Elements

(1) Power and output connector

(2) Hold time setting

(3) Sensitivity setting

(4) Detection indicator LED

(5) Programming pads

(6) Expansion pads

Fig. 3: Control elements

© RFbeam Microwave GmbH www.rfbeam.ch

Page 3/7

1

2

3

5

6

4